summaryrefslogtreecommitdiff
path: root/net/bridge
AgeCommit message (Collapse)Author
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19netfilter: ebt: Use new helper ebt_invalid_target to check targetGao Feng
Use the new helper function ebt_invalid_target instead of the old macro INVALID_TARGET and other duplicated codes to enhance the readability. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Receive notification about successful FDB offloadArkadi Sharshevsky
When a new static FDB is added to the bridge a notification is sent to the driver for offload. In case of successful offload the driver should notify the bridge back, which in turn should mark the FDB as offloaded. Currently, externally learned is equivalent for being offloaded which is not correct due to the fact that FDBs which are added from user-space are also marked as externally learned. In order to specify if an FDB was successfully offloaded a new flag is introduced. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for notifying devices about FDB add/delArkadi Sharshevsky
Currently the bridge doesn't notify the underlying devices about new FDBs learned. The FDB sync is placed on the switchdev notifier chain because devices may potentially learn FDB that are not directly related to their ports, for example: 1. Mixed SW/HW bridge - FDBs that point to the ASICs external devices should be offloaded as CPU traps in order to perform forwarding in slow path. 2. EVPN - Externally learned FDBs for the vtep device. Notification is sent only about static FDB add/del. This is done due to fact that currently this is the only scenario supported by switch drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for calling FDB external learning under rcuArkadi Sharshevsky
This is done as a preparation to moving the switchdev notifier chain to be atomic. The FDB external learning should be called under rtnl or rcu. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: bridge: Add support for offloading port attributesArkadi Sharshevsky
Currently the flood, learning and learning_sync port attributes are offloaded by setting the SELF flag. Add support for offloading the flood and learning attribute through the bridge code. In case of setting an unsupported flag on a offloded port the operation will fail. The learning_sync attribute doesn't have any software representation and cannot be offloaded through the bridge code. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06net: bridge: fix a null pointer dereference in br_afspecNikolay Aleksandrov
We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01net: bridge: start hello timer only if device is upNikolay Aleksandrov
When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long <lucien.xin@gmail.com> CC: Ivan Vecera <cera@cera.cz> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 6d18c732b95c ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26bridge: Export multicast enabled stateIdo Schimmel
During enslavement to a bridge, after the CHANGEUPPER is sent, the multicast enabled state of the bridge isn't propagated down to the offloading driver unless it's changed. This patch allows such drivers to query the multicast enabled state from the bridge, so that they'll be able to correctly configure their flood tables during port enslavement. In case multicast is disabled, unregistered multicast packets can be treated as broadcast and be flooded through all the bridge ports. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26bridge: Export VLAN filtering stateIdo Schimmel
It's useful for drivers supporting bridge offload to be able to query the bridge's VLAN filtering state. Currently, upon enslavement to a bridge master, the offloading driver will only learn about the bridge's VLAN filtering state after the bridge device was already linked with its slave. Being able to query the bridge's VLAN filtering state allows such drivers to forbid enslavement in case resource couldn't be allocated for a VLAN-aware bridge and also choose the correct initialization routine for the enslaved port, which is dependent on the bridge type. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-05-22bridge: fix hello and hold timers starting/stoppingIvan Vecera
Current bridge code incorrectly handles starting/stopping of hello and hold timers during STP enable/disable. 1. Timers are stopped in br_stp_start() during NO_STP->USER_STP transition. The timers are already stopped in NO_STP state so this is confusing no-op. 2. During USER_STP->NO_STP transition the timers are started. This does not make sense and is confusion because the timer should not be active in NO_STP state. Cc: davem@davemloft.net Cc: sashok@cumulusnetworks.com Cc: stephen@networkplumber.org Cc: bridge@lists.linux-foundation.org Cc: lucien.xin@gmail.com Cc: nikolay@cumulusnetworks.com Signed-off-by: Ivan Vecera <cera@cera.cz> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21bridge: start hello_timer when enabling KERNEL_STP in br_stp_startXin Long
Since commit 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers"), bridge would not start hello_timer if stp_enabled is not KERNEL_STP when br_dev_open. The problem is even if users set stp_enabled with KERNEL_STP later, the timer will still not be started. It causes that KERNEL_STP can not really work. Users have to re-ifup the bridge to avoid this. This patch is to fix it by starting br->hello_timer when enabling KERNEL_STP in br_stp_start. As an improvement, it's also to start hello_timer again only when br->stp_enabled is KERNEL_STP in br_hello_timer_expired, there is no reason to start the timer again when it's NO_STP. Fixes: 76b91c32dd86 ("bridge: stp: when using userspace stp stop kernel hello and hold timers") Reported-by: Haidong Li <haili@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) When using IPVS in direct-routing mode, normal traffic from the LVS host to a back-end server is sometimes incorrectly NATed on the way back into the LVS host. Patch to fix this from Julian Anastasov. 2) Calm down clang compilation warning in ctnetlink due to type mismatch, from Matthias Kaehlcke. 3) Do not re-setup NAT for conntracks that are already confirmed, this is fixing a problem that was introduced in the previous nf-next batch. Patch from Liping Zhang. 4) Do not allow conntrack helper removal from userspace cthelper infrastructure if already in used. This comes with an initial patch to introduce nf_conntrack_helper_put() that is required by this fix. From Liping Zhang. 5) Zero the pad when copying data to userspace, otherwise iptables fails to remove rules. This is a follow up on the patchset that sorts out the internal match/target structure pointer leak to userspace. Patch from the same author, Willem de Bruijn. This also comes with a build failure when CONFIG_COMPAT is not on, coming in the last patch of this series. 6) SYNPROXY crashes with conntrack entries that are created via ctnetlink, more specifically via conntrackd state sync. Patch from Eric Leblond. 7) RCU safe iteration on set element dumping in nf_tables, from Liping Zhang. 8) Missing sanitization of immediate date for the bitwise and cmp expressions in nf_tables. 9) Refcounting logic for chain and objects from set elements does not integrate into the nf_tables 2-phase commit protocol. 10) Missing sanitization of target verdict in ebtables arpreply target, from Gao Feng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19sk_buff: remove support for csum_bad in sk_buffDavide Caratti
This bit was introduced with commit 5a21232983aa ("net: Support for csum_bad in skbuff") to reduce the stack workload when processing RX packets carrying a wrong Internet Checksum. Up to now, only one driver and GRO core are setting it. Suggested-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18bridge: netlink: check vlan_default_pvid rangeTobias Jungel
Currently it is allowed to set the default pvid of a bridge to a value above VLAN_VID_MASK (0xfff). This patch adds a check to br_validate and returns -EINVAL in case the pvid is out of bounds. Reproduce by calling: [root@test ~]# ip l a type bridge [root@test ~]# ip l a type dummy [root@test ~]# ip l s bridge0 type bridge vlan_filtering 1 [root@test ~]# ip l s bridge0 type bridge vlan_default_pvid 9999 [root@test ~]# ip l s dummy0 master bridge0 [root@test ~]# bridge vlan port vlan ids bridge0 9999 PVID Egress Untagged dummy0 9999 PVID Egress Untagged Fixes: 0f963b7592ef ("bridge: netlink: add support for default_pvid") Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16ebtables: arpreply: Add the standard target sanity checkGao Feng
The info->target comes from userspace and it would be used directly. So we need to add the sanity check to make sure it is a valid standard target, although the ebtables tool has already checked it. Kernel needs to validate anything coming from userspace. If the target is set as an evil value, it would break the ebtables and cause a panic. Because the non-standard target is treated as one offset. Now add one helper function ebt_invalid_target, and we would replace the macro INVALID_TARGET later. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-15netfilter: xtables: zero padding in data_to_userWillem de Bruijn
When looking up an iptables rule, the iptables binary compares the aligned match and target data (XT_ALIGN). In some cases this can exceed the actual data size to include padding bytes. Before commit f77bc5b23fb1 ("iptables: use match, target and data copy_to_user helpers") the malloc()ed bytes were overwritten by the kernel with kzalloced contents, zeroing the padding and making the comparison succeed. After this patch, the kernel copies and clears only data, leaving the padding bytes undefined. Extend the clear operation from data size to aligned data size to include the padding bytes, if any. Padding bytes can be observed in both match and target, and the bug triggered, by issuing a rule with match icmp and target ACCEPT: iptables -t mangle -A INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT iptables -t mangle -D INPUT -i lo -p icmp --icmp-type 1 -j ACCEPT Fixes: f77bc5b23fb1 ("iptables: use match, target and data copy_to_user helpers") Reported-by: Paul Moore <pmoore@redhat.com> Reported-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-05bridge: netlink: account for IFLA_BRPORT_{B, M}CAST_FLOOD size and policyTobias Klauser
The attribute sizes for IFLA_BRPORT_MCAST_FLOOD and IFLA_BRPORT_BCAST_FLOOD weren't accounted for in br_port_info_size() when they were added. Do so now and also add the corresponding policy entries: Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Mike Manning <mmanning@brocade.com> Fixes: b6cb5ac8331b ("net: bridge: add per-port multicast flood flag") Fixes: 99f906e9ad7b ("bridge: add per-port broadcast flood flag") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS/OVS fixes for net The following patchset contains a rather large batch of Netfilter, IPVS and OVS fixes for your net tree. This includes fixes for ctnetlink, the userspace conntrack helper infrastructure, conntrack OVS support, ebtables DNAT target, several leaks in error path among other. More specifically, they are: 1) Fix reference count leak in the CT target error path, from Gao Feng. 2) Remove conntrack entry clashing with a matching expectation, patch from Jarno Rajahalme. 3) Fix bogus EEXIST when registering two different userspace helpers, from Liping Zhang. 4) Don't leak dummy elements in the new bitmap set type in nf_tables, from Liping Zhang. 5) Get rid of module autoload from conntrack update path in ctnetlink, we don't need autoload at this late stage and it is happening with rcu read lock held which is not good. From Liping Zhang. 6) Fix deadlock due to double-acquire of the expect_lock from conntrack update path, this fixes a bug that was introduced when the central spinlock got removed. Again from Liping Zhang. 7) Safe ct->status update from ctnetlink path, from Liping. The expect_lock protection that was selected when the central spinlock was removed was not really protecting anything at all. 8) Protect sequence adjustment under ct->lock. 9) Missing socket match with IPv6, from Peter Tirsek. 10) Adjust skb->pkt_type of DNAT'ed frames from ebtables, from Linus Luessing. 11) Don't give up on evaluating the expression on new entries added via dynset expression in nf_tables, from Liping Zhang. 12) Use skb_checksum() when mangling icmpv6 in IPv6 NAT as this deals with non-linear skbuffs. 13) Don't allow IPv6 service in IPVS if no IPv6 support is available, from Paolo Abeni. 14) Missing mutex release in error path of xt_find_table_lock(), from Dan Carpenter. 15) Update maintainers files, Netfilter section. Add Florian to the file, refer to nftables.org and change project status from Supported to Maintained. 16) Bail out on mismatching extensions in element updates in nf_tables. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for your net-next tree. A large bunch of code cleanups, simplify the conntrack extension codebase, get rid of the fake conntrack object, speed up netns by selective synchronize_net() calls. More specifically, they are: 1) Check for ct->status bit instead of using nfct_nat() from IPVS and Netfilter codebase, patch from Florian Westphal. 2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao. 3) Simplify FTP IPVS helper module registration path, from Arushi Singhal. 4) Introduce nft_is_base_chain() helper function. 5) Enforce expectation limit from userspace conntrack helper, from Gao Feng. 6) Add nf_ct_remove_expect() helper function, from Gao Feng. 7) NAT mangle helper function return boolean, from Gao Feng. 8) ctnetlink_alloc_expect() should only work for conntrack with helpers, from Gao Feng. 9) Add nfnl_msg_type() helper function to nfnetlink to build the netlink message type. 10) Get rid of unnecessary cast on void, from simran singhal. 11) Use seq_puts()/seq_putc() instead of seq_printf() where possible, also from simran singhal. 12) Use list_prev_entry() from nf_tables, from simran signhal. 13) Remove unnecessary & on pointer function in the Netfilter and IPVS code. 14) Remove obsolete comment on set of rules per CPU in ip6_tables, no longer true. From Arushi Singhal. 15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng. 16) Remove unnecessary nested rcu_read_lock() in __nf_nat_decode_session(). Code running from hooks are already guaranteed to run under RCU read side. 17) Remove deadcode in nf_tables_getobj(), from Aaron Conole. 18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(), also from Aaron. 19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole. 20) Don't propagate NF_DROP error to userspace via ctnetlink in __nf_nat_alloc_null_binding() function, from Gao Feng. 21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks, from Gao Feng. 22) Kill the fake untracked conntrack objects, use ctinfo instead to annotate a conntrack object is untracked, from Florian Westphal. 23) Remove nf_ct_is_untracked(), now obsolete since we have no conntrack template anymore, from Florian. 24) Add event mask support to nft_ct, also from Florian. 25) Move nf_conn_help structure to include/net/netfilter/nf_conntrack_helper.h. 26) Add a fixed 32 bytes scratchpad area for conntrack helpers. Thus, we don't deal with variable conntrack extensions anymore. Make sure userspace conntrack helper doesn't go over that size. Remove variable size ct extension infrastructure now this code got no more clients. From Florian Westphal. 27) Restore offset and length of nf_ct_ext structure to 8 bytes now that wraparound is not possible any longer, also from Florian. 28) Allow to get rid of unassured flows under stress in conntrack, this applies to DCCP, SCTP and TCP protocols, from Florian. 29) Shrink size of nf_conntrack_ecache structure, from Florian. 30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker, from Gao Feng. 31) Register SYNPROXY hooks on demand, from Florian Westphal. 32) Use pernet hook whenever possible, instead of global hook registration, from Florian Westphal. 33) Pass hook structure to ebt_register_table() to consolidate some infrastructure code, from Florian Westphal. 34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the SYNPROXY code, to make sure device stats are not fooled, patch from Gao Feng. 35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we don't need anymore if we just select a fixed size instead of expensive runtime time calculation of this. From Florian. 36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(), from Florian. 37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from Florian. 38) Attach NAT extension on-demand from masquerade and pptp helper path, from Florian. 39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole. 40) Speed up netns by selective calls of synchronize_net(), from Florian Westphal. 41) Silence stack size warning gcc in 32-bit arch in snmp helper, from Florian. 42) Inconditionally call nf_ct_ext_destroy(), even if we have no extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30net: bridge: Fix improper taking over HW learned FDBArkadi Sharshevsky
Commit 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb entries") added the ability to "take over an entry which was previously learned via HW when it shows up from a SW port". However, if an entry was learned via HW and then a control packet (e.g., ARP request) was trapped to the CPU, the bridge driver will update the entry and remove the externally learned flag, although the entry is still present in HW. Instead, only clear the externally learned flag in case of roaming. Fixes: 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb entries") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27bridge: add per-port broadcast flood flagMike Manning
Support for l2 multicast flood control was added in commit b6cb5ac8331b ("net: bridge: add per-port multicast flood flag"). It allows broadcast as it was introduced specifically for unknown multicast flood control. But as broadcast is a special case of multicast, this may also need to be disabled. For this purpose, introduce a flag to disable the flooding of received l2 broadcasts. This approach is backwards compatible and provides flexibility in filtering for the desired packet types. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ebtables: remove nf_hook_register usageFlorian Westphal
Similar to ip_register_table, pass nf_hook_ops to ebt_register_table(). This allows to handle hook registration also via pernet_ops and allows us to avoid use of legacy register_hook api. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-25bridge: move bridge multicast cleanup to ndo_uninitXin Long
During removing a bridge device, if the bridge is still up, a new mdb entry still can be added in br_multicast_add_group() after all mdb entries are removed in br_multicast_dev_del(). Like the path: mld_ifc_timer_expire -> mld_sendpack -> ... br_multicast_rcv -> br_multicast_add_group The new mp's timer will be set up. If the timer expires after the bridge is freed, it may cause use-after-free panic in br_multicast_group_expired. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffffa07ed2c8>] br_multicast_group_expired+0x28/0xb0 [bridge] Call Trace: <IRQ> [<ffffffff81094536>] call_timer_fn+0x36/0x110 [<ffffffffa07ed2a0>] ? br_mdb_free+0x30/0x30 [bridge] [<ffffffff81096967>] run_timer_softirq+0x237/0x340 [<ffffffff8108dcbf>] __do_softirq+0xef/0x280 [<ffffffff8169889c>] call_softirq+0x1c/0x30 [<ffffffff8102c275>] do_softirq+0x65/0xa0 [<ffffffff8108e055>] irq_exit+0x115/0x120 [<ffffffff81699515>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff81697a5d>] apic_timer_interrupt+0x6d/0x80 Nikolay also found it would cause a memory leak - the mdb hash is reallocated and not freed due to the mdb rehash. unreferenced object 0xffff8800540ba800 (size 2048): backtrace: [<ffffffff816e2287>] kmemleak_alloc+0x67/0xc0 [<ffffffff81260bea>] __kmalloc+0x1ba/0x3e0 [<ffffffffa05c60ee>] br_mdb_rehash+0x5e/0x340 [bridge] [<ffffffffa05c74af>] br_multicast_new_group+0x43f/0x6e0 [bridge] [<ffffffffa05c7aa3>] br_multicast_add_group+0x203/0x260 [bridge] [<ffffffffa05ca4b5>] br_multicast_rcv+0x945/0x11d0 [bridge] [<ffffffffa05b6b10>] br_dev_xmit+0x180/0x470 [bridge] [<ffffffff815c781b>] dev_hard_start_xmit+0xbb/0x3d0 [<ffffffff815c8743>] __dev_queue_xmit+0xb13/0xc10 [<ffffffff815c8850>] dev_queue_xmit+0x10/0x20 [<ffffffffa02f8d7a>] ip6_finish_output2+0x5ca/0xac0 [ipv6] [<ffffffffa02fbfc6>] ip6_finish_output+0x126/0x2c0 [ipv6] [<ffffffffa02fc245>] ip6_output+0xe5/0x390 [ipv6] [<ffffffffa032b92c>] NF_HOOK.constprop.44+0x6c/0x240 [ipv6] [<ffffffffa032bd16>] mld_sendpack+0x216/0x3e0 [ipv6] [<ffffffffa032d5eb>] mld_ifc_timer_expire+0x18b/0x2b0 [ipv6] This could happen when ip link remove a bridge or destroy a netns with a bridge device inside. With Nikolay's suggestion, this patch is to clean up bridge multicast in ndo_uninit after bridge dev is shutdown, instead of br_dev_delete, so that netif_running check in br_multicast_add_group can avoid this issue. v1->v2: - fix this issue by moving br_multicast_dev_del to ndo_uninit, instead of calling dev_close in br_dev_delete. (NOTE: Depends upon b6fe0440c637 ("bridge: implement missing ndo_uninit()")) Fixes: e10177abf842 ("bridge: multicast: fix handling of temp and perm entries") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bridge: ebtables: fix reception of frames DNAT-ed to bridge device/portLinus Lüssing
When trying to redirect bridged frames to the bridge device itself or a bridge port (brouting) via the dnat target then this currently fails: The ethernet destination of the frame is dnat'ed to the MAC address of the bridge device or port just fine. However, the IP code drops it in the beginning of ip_input.c/ip_rcv() as the dnat target left the skb->pkt_type as PACKET_OTHERHOST. Fixing this by resetting skb->pkt_type to an appropriate type after dnat'ing. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-17net: rtnetlink: plumb extended ack to doit functionDavid Ahern
Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net: bridge: notify on hw fdb takeoverNikolay Aleksandrov
Recently we added support for SW fdbs to take over HW ones, but that results in changing a user-visible fdb flag thus we need to send a notification, also it's consistent with how HW takes over SW entries. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bridge: netlink: register netdevice before executing changelinkIdo Schimmel
Peter reported a kernel oops when executing the following command: $ ip link add name test type bridge vlan_default_pvid 1 [13634.939408] BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 [13634.939436] IP: __vlan_add+0x73/0x5f0 [...] [13634.939783] Call Trace: [13634.939791] ? pcpu_next_unpop+0x3b/0x50 [13634.939801] ? pcpu_alloc+0x3d2/0x680 [13634.939810] ? br_vlan_add+0x135/0x1b0 [13634.939820] ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0 [13634.939834] ? br_changelink+0x120/0x4e0 [13634.939844] ? br_dev_newlink+0x50/0x70 [13634.939854] ? rtnl_newlink+0x5f5/0x8a0 [13634.939864] ? rtnl_newlink+0x176/0x8a0 [13634.939874] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.939886] ? rtnetlink_rcv_msg+0xe1/0x220 [13634.939896] ? lookup_fast+0x52/0x370 [13634.939905] ? rtnl_newlink+0x8a0/0x8a0 [13634.939915] ? netlink_rcv_skb+0xa1/0xc0 [13634.939925] ? rtnetlink_rcv+0x24/0x30 [13634.939934] ? netlink_unicast+0x177/0x220 [13634.939944] ? netlink_sendmsg+0x2fe/0x3b0 [13634.939954] ? _copy_from_user+0x39/0x40 [13634.939964] ? sock_sendmsg+0x30/0x40 [13634.940159] ? ___sys_sendmsg+0x29d/0x2b0 [13634.940326] ? __alloc_pages_nodemask+0xdf/0x230 [13634.940478] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.940592] ? mem_cgroup_try_charge+0x76/0x1a0 [13634.940701] ? __handle_mm_fault+0xdb9/0x10b0 [13634.940809] ? __sys_sendmsg+0x51/0x90 [13634.940917] ? entry_SYSCALL_64_fastpath+0x1e/0xad The problem is that the bridge's VLAN group is created after setting the default PVID, when registering the netdevice and executing its ndo_init(). Fix this by changing the order of both operations, so that br_changelink() is only processed after the netdevice is registered, when the VLAN group is already initialized. Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Peter V. Saveliev <peter@svinota.eu> Tested-by: Peter V. Saveliev <peter@svinota.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11bridge: implement missing ndo_uninit()Ido Schimmel
While the bridge driver implements an ndo_init(), it was missing a symmetric ndo_uninit(), causing the different de-initialization operations to be scattered around its dellink() and destructor(). Implement a symmetric ndo_uninit() and remove the overlapping operations from its dellink() and destructor(). This is a prerequisite for the next patch, as it allows us to have a proper cleanup upon changelink() failure during the bridge's newlink(). Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07netfilter: Remove exceptional & on function nameArushi Singhal
Remove & from function pointers to conform to the style found elsewhere in the file. Done using the following semantic patch // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-07netfilter: Remove unnecessary cast on void pointersimran singhal
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Unnecessary parantheses are also remove. Signed-off-by: simran singhal <singhalsimran0@gmail.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-28net: break include loop netdevice.h, dsa.h, devlink.hAndrew Lunn
There is an include loop between netdevice.h, dsa.h, devlink.h because of NETDEV_ALIGN, making it impossible to use devlink structures in dsa.h. Break this loop by taking dsa.h out of netdevice.h, add a forward declaration of dsa_switch_tree and netdev_set_default_ethtool_ops() function, which is what netdevice.h requires. No longer having dsa.h in netdevice.h means the includes in dsa.h no longer get included. This breaks a few other files which depend on these includes. Add these directly in the affected file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: bridge: allow to add externally learned entries from user-spaceNikolay Aleksandrov
The NTF_EXT_LEARNED flag was added for switchdev and externally learned entries, but it can also be used for entries learned via a software in user-space which requires dynamic entries that do not expire. One such case that we have is with quagga and evpn which need dynamic entries but also require to age them themselves. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: bridge: allow SW learn to take over HW fdb entriesNikolay Aleksandrov
Allow to take over an entry which was previously learned via HW when it shows up from a SW port. This is analogous to how HW takes over SW learned entries already. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/genet/bcmmii.c drivers/net/hyperv/netvsc.c kernel/bpf/hashtab.c Almost entirely overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. A couple of new features for nf_tables, and unsorted cleanups and incremental updates for the Netfilter tree. More specifically, they are: 1) Allow to check for TCP option presence via nft_exthdr, patch from Phil Sutter. 2) Add symmetric hash support to nft_hash, from Laura Garcia Liebana. 3) Use pr_cont() in ebt_log, from Joe Perches. 4) Remove some dead code in arp_tables reported via static analysis tool, from Colin Ian King. 5) Consolidate nf_tables expression validation, from Liping Zhang. 6) Consolidate set lookup via nft_set_lookup(). 7) Remove unnecessary rcu read lock side in bridge netfilter, from Florian Westphal. 8) Remove unused variable in nf_reject_ipv4, from Tahee Yoo. 9) Pass nft_ctx struct to object initialization indirections, from Florian Westphal. 10) Add code to integrate conntrack helper into nf_tables, also from Florian. 11) Allow to check if interface index or name exists via NFTA_FIB_F_PRESENT, from Phil Sutter. 12) Simplify resolve_normal_ct(), from Florian. 13) Use per-limit spinlock in nft_limit and xt_limit, from Liping Zhang. 14) Use rwlock in nft_set_rbtree set, also from Liping Zhang. 15) One patch to remove a useless printk at netns init path in ipvs, and several patches to document IPVS knobs. 16) Use refcount_t for reference counter in the Netfilter/IPVS code, from Elena Reshetova. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16bridge: resolve a false alarm of lockdepWANG Cong
Andrei reported a false alarm of lockdep at net/bridge/br_fdb.c:109, this is because in Andrei's case, a spin_bug() was already triggered before this, therefore the debug_locks is turned off, lockdep_is_held() is no longer accurate after that. We should use lockdep_assert_held_once() instead of lockdep_is_held() to respect debug_locks. Fixes: 410b3d48f5111 ("bridge: fdb: add proper lock checks in searching functions") Reported-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, a rather large batch of fixes targeted to nf_tables, conntrack and bridge netfilter. More specifically, they are: 1) Don't track fragmented packets if the socket option IP_NODEFRAG is set. From Florian Westphal. 2) SCTP protocol tracker assumes that ICMP error messages contain the checksum field, what results in packet drops. From Ying Xue. 3) Fix inconsistent handling of AH traffic from nf_tables. 4) Fix new bitmap set representation with big endian. Fix mismatches in nf_tables due to incorrect big endian handling too. Both patches from Liping Zhang. 5) Bridge netfilter doesn't honor maximum fragment size field, cap to largest fragment seen. From Florian Westphal. 6) Fake conntrack entry needs to be aligned to 8 bytes since the 3 LSB bits are now used to store the ctinfo. From Steven Rostedt. 7) Fix element comments with the bitmap set type. Revert the flush field in the nft_set_iter structure, not required anymore after fixing up element comments. 8) Missing error on invalid conntrack direction from nft_ct, also from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13bridge: drop netfilter fake rtable unconditionallyFlorian Westphal
Andreas reports kernel oops during rmmod of the br_netfilter module. Hannes debugged the oops down to a NULL rt6info->rt6i_indev. Problem is that br_netfilter has the nasty concept of adding a fake rtable to skb->dst; this happens in a br_netfilter prerouting hook. A second hook (in bridge LOCAL_IN) is supposed to remove these again before the skb is handed up the stack. However, on module unload hooks get unregistered which means an skb could traverse the prerouting hook that attaches the fake_rtable, while the 'fake rtable remove' hook gets removed from the hooklist immediately after. Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core") Reported-by: Andreas Karis <akaris@redhat.com> Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13netfilter: bridge: honor frag_max_size when refragmentingFlorian Westphal
consider a bridge with mtu 9000, but end host sending smaller packets to another host with mtu < 9000. In this case, after reassembly, bridge+defrag would refragment, and then attempt to send the reassembled packet as long as it was below 9k. Instead we have to cap by the largest fragment size seen. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 02:16:22 +0000