summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2021-02-11Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernDavid S. Miller
el/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2021-02-11 Here's the main bluetooth-next pull request for 5.12: - Add support for advertising monitor offliading using Microsoft vendor extensions - Add firmware download support for MediaTek MT7921U USB devices - Suspend-related fixes for Qualcomm devices - Add support for Intel GarfieldPeak controller - Various other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-03Bluetooth: Fix crash in mgmt_add_adv_patterns_monitor_completeHoward Chung
If hci_add_adv_monitor is a pending command(e.g. forward to msft_add_monitor_pattern), it is possible that mgmt_add_adv_patterns_monitor_complete gets called before cmd->user_data gets set, which will cause a crash when we try to get the moniter handle through cmd->user_data in mgmt_add_adv_patterns_monitor_complete. This moves the cmd->user_data assignment earlier than hci_add_adv_monitor. RIP: 0010:mgmt_add_adv_patterns_monitor_complete+0x82/0x187 [bluetooth] Code: 1e bf 03 00 00 00 be 52 00 00 00 4c 89 ea e8 9e e4 02 00 49 89 c6 48 85 c0 0f 84 06 01 00 00 48 89 5d b8 4c 89 fb 4d 8b 7e 30 <41> 0f b7 47 18 66 89 45 c0 45 84 e4 75 5a 4d 8b 56 28 48 8d 4d c8 RSP: 0018:ffffae81807dbcb8 EFLAGS: 00010286 RAX: ffff91c4bdf723c0 RBX: 0000000000000000 RCX: ffff91c4e5da5b80 RDX: ffff91c405680000 RSI: 0000000000000052 RDI: ffff91c49d654c00 RBP: ffffae81807dbd00 R08: ffff91c49fb157e0 R09: ffff91c49fb157e0 R10: 000000000002a4f0 R11: ffffffffc0819cfd R12: 0000000000000000 R13: ffff91c405680000 R14: ffff91c4bdf723c0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91c4ea300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000133612002 CR4: 00000000003606e0 Call Trace: ? msft_le_monitor_advertisement_cb+0x111/0x141 [bluetooth] hci_event_packet+0x425e/0x631c [bluetooth] ? printk+0x59/0x73 ? __switch_to_asm+0x41/0x70 ? msft_le_set_advertisement_filter_enable_cb+0xa6/0xa6 [bluetooth] ? bt_dbg+0xb4/0xbb [bluetooth] ? __switch_to_asm+0x41/0x70 hci_rx_work+0x101/0x319 [bluetooth] process_one_work+0x257/0x506 worker_thread+0x10d/0x284 kthread+0x14c/0x154 ? process_one_work+0x506/0x506 ? kthread_blkcg+0x2c/0x2c ret_from_fork+0x1f/0x40 Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-02Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_dataGopal Tiwari
kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-01Bluetooth: Skip eSCO 2M params when not supportedYu Liu
If a peer device doesn't support eSCO 2M we should skip the params that use it when setting up sync connection since they will always fail. Signed-off-by: Yu Liu <yudiliu@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: fix indentation and alignment reported by checkpatchTomoyuki Matsushita
Signed-off-by: Tomoyuki Matsushita <xorphitus@fastmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: fix coccicheck warnings debugfsJiapeng Zhong
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Reported-by: Abaci Robot<abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirkHans de Goede
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-27net: remove redundant 'depends on NET'Masahiro Yamada
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25Bluetooth: L2CAP: Try harder to accept device not knowing optionsBastien Nocera
The current implementation of L2CAP options negotiation will continue the negotiation when a device responds with L2CAP_CONF_UNACCEPT ("unaccepted options"), but not when the device replies with L2CAP_CONF_UNKNOWN ("unknown options"). Trying to continue the negotiation without ERTM support will allow Bluetooth-capable XBox One controllers (notably models 1708 and 1797) to connect. btmon before patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 #64 [hci0] 59.182702 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 #65 [hci0] 59.182744 L2CAP: Configure Request (0x04) ident 3 len 15 Destination CID: 64 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #66 [hci0] 59.183948 L2CAP: Configure Request (0x04) ident 1 len 8 Destination CID: 64 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 #67 [hci0] 59.183994 L2CAP: Configure Response (0x05) ident 1 len 10 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 #69 [hci0] 59.187676 L2CAP: Configure Response (0x05) ident 3 len 7 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #70 [hci0] 59.187722 L2CAP: Disconnection Request (0x06) ident 4 len 4 Destination CID: 64 Source CID: 64 > ACL Data RX: Handle 256 flags 0x02 dlen 12 #73 [hci0] 59.192714 L2CAP: Disconnection Response (0x07) ident 4 len 4 Destination CID: 64 Source CID: 64 btmon after patch: > ACL Data RX: Handle 256 flags 0x02 dlen 16 #248 [hci0] 103.502970 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection pending (0x0001) Status: No further information available (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 16 #249 [hci0] 103.504184 L2CAP: Connection Response (0x03) ident 5 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 23 #250 [hci0] 103.504398 L2CAP: Configure Request (0x04) ident 6 len 15 Destination CID: 65 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #251 [hci0] 103.505472 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 < ACL Data TX: Handle 256 flags 0x00 dlen 18 #252 [hci0] 103.505689 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1480 > ACL Data RX: Handle 256 flags 0x02 dlen 15 #254 [hci0] 103.509165 L2CAP: Configure Response (0x05) ident 6 len 7 Source CID: 65 Flags: 0x0000 Result: Failure - unknown options (0x0003) 04 . < ACL Data TX: Handle 256 flags 0x00 dlen 12 #255 [hci0] 103.509426 L2CAP: Configure Request (0x04) ident 7 len 4 Destination CID: 65 Flags: 0x0000 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #257 [hci0] 103.511870 L2CAP: Connection Request (0x02) ident 8 len 4 PSM: 1 (0x0001) Source CID: 66 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #259 [hci0] 103.514121 L2CAP: Configure Response (0x05) ident 7 len 6 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Signed-off-by: Florian Dollinger <dollinger.florian@gmx.de> Co-developed-by: Florian Dollinger <dollinger.florian@gmx.de> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: L2CAP: Fix handling fragmented lengthLuiz Augusto von Dentz
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table 1.1: 'Start Fragments always either begin with the first octet of the Basic L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part B, Section 6.6.2).' Apparently this was changed by the following errata: https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: btusb: fix memory leak on suspend and resumeVamshi K Sthambamkadi
kmemleak report: unreferenced object 0xffff9b1127f00500 (size 208): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`.............. backtrace: [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480 [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b1125c6ee00 (size 512): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270 [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330 [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90 [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b112b395788 (size 8): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 8 bytes): 20 00 00 00 00 00 04 00 ....... backtrace: [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460 [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb] [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb] [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth] [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 In pm sleep-resume context, while the btusb device rebinds, it enters hci_unregister_dev(), whilst there is a possibility of hdev receiving PM_POST_SUSPEND suspend_notifier event, leading to generation of msg frames. When hci_unregister_dev() completes, i.e. hdev context is destroyed/freed, those intermittently sent msg frames cause memory leak. BUG details: Below is stack trace of thread that enters hci_unregister_dev(), marks the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier lock - refer unregister_pm_notifier(). hci_unregister_dev+0xa5/0x320 [bluetoot] btusb_disconnect+0x68/0x150 [btusb] usb_unbind_interface+0x77/0x250 ? kernfs_remove_by_name_ns+0x75/0xa0 device_release_driver_internal+0xfe/0x1 device_release_driver+0x12/0x20 bus_remove_device+0xe1/0x150 device_del+0x192/0x3e0 ? usb_remove_ep_devs+0x1f/0x30 usb_disable_device+0x92/0x1b0 usb_disconnect+0xc2/0x270 hub_event+0x9f6/0x15d0 ? rpm_idle+0x23/0x360 ? rpm_idle+0x26b/0x360 process_one_work+0x209/0x3b0 worker_thread+0x34/0x400 ? process_one_work+0x3b0/0x3b0 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Below is stack trace of thread executing hci_suspend_notifier() which processes the PM_POST_SUSPEND event, while the unbinding thread is waiting on lock. hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth] blocking_notifier_call_chain+0x69/0x90 pm_notifier_call_chain+0x1a/0x20 pm_suspend.cold.9+0x334/0x352 state_store+0x84/0xf0 kobj_attr_store+0x12/0x20 sysfs_kf_write+0x3b/0x40 kernfs_fop_write+0xda/0x1c0 vfs_write+0xbb/0x250 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER is set. Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: Put HCI device if inquiry procedure interruptsPan Bian
Jump to the label done to decrement the reference count of HCI device hdev on path that the Inquiry procedure is interrupted. Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: drop HCI device reference before returnPan Bian
Call hci_dev_put() to decrement reference count of HCI device hdev if fails to duplicate memory. Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: disable advertisement filters during suspendHoward Chung
This adds logic to disable and reenable advertisement filters during suspend and resume. After this patch, we would only receive packets from devices in allow list during suspend. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT interleave scanning integrationArchie Pusaka
When MSFT extension is supported, we don't have to interleave the scan as we could just do allowlist scan. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT handle filter enablementArchie Pusaka
Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT handle controller resetArchie Pusaka
When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT remove monitorArchie Pusaka
Implements the monitor removal functionality for advertising monitor offloading to MSFT controllers. Supply handle = 0 to remove all monitors. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT add monitorArchie Pusaka
Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25Bluetooth: advmon offload MSFT add rssi supportArchie Pusaka
MSFT needs rssi parameter for monitoring advertisement packet, therefore we should supply them from mgmt. This adds a new opcode to add advertisement monitor with rssi parameters. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Yun-Hao Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-06Bluetooth: avoid u128_xor() on potentially misaligned inputsArd Biesheuvel
u128_xor() takes pointers to quantities that are assumed to be at least 64-bit aligned, which is not guaranteed to be the case in the smp_c1() routine. So switch to crypto_xor() instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-27Bluetooth: Fix initializing response id after clearing structChristopher William Snowhill
Looks like this was missed when patching the source to clear the structures throughout, causing this one instance to clear the struct after the response id is assigned. Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members") Signed-off-by: Christopher William Snowhill <chris@kode54.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: Cancel Inquiry before Create ConnectionSonny Sasaka
Many controllers do not allow HCI Create Connection while it is doing Inquiry. This patch adds Inquiry Cancel before Create Connection in this case to allow the controller to do Create Connection. User space will be aware of this Inquiry cancellation and they may issue another discovery request afterwards. Sample Command Disallowed response of HCI Create Connection: < HCI Command: Inquiry (0x01|0x0001) plen 5 Access code: 0x9e8b33 (General Inquiry) Length: 10.24s (0x08) Num responses: 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) ncmd 2 Status: Success (0x00) < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: XX:XX:XX:XX:XX:XX Packet type: 0xcc18 Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Command Disallowed (0x0c) Handle: 65535 Address: XX:XX:XX:XX:XX:XX Link type: ACL (0x01) Encryption: Disabled (0x00) Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: Pause service discovery for suspendAbhishek Pandit-Subedi
Just like MGMT_OP_START_DISCOVERY, we should reject MGMT_OP_START_SERVICE_DISCOVERY with MGMT_STATUS_BUSY when we are paused for suspend. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: Remove hci_req_le_suspend_configAbhishek Pandit-Subedi
Add a missing SUSPEND_SCAN_ENABLE in passive scan, remove the separate function for configuring le scan during suspend and update the request complete function to clear both enable and disable tasks. Fixes: dce0a4be8054 ("Bluetooth: Set missing suspend task bits") Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: Increment management interface revisionMarcel Holtmann
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Set missing suspend task bitsAbhishek Pandit-Subedi
When suspending, mark SUSPEND_SCAN_ENABLE and SUSPEND_SCAN_DISABLE tasks correctly when either classic or le scanning is modified. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Change MGMT security info CMD to be more genericDaniel Winkler
For advertising, we wish to know the LE tx power capabilities of the controller in userspace, so this patch edits the Security Info MGMT command to be more generic, such that other various controller capabilities can be included in the EIR data. This change also includes the LE min and max tx power into this newly-named command. The change was tested by manually verifying that the MGMT command returns the tx power range as expected in userspace. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Query LE tx power on startupDaniel Winkler
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci device is initialized, and stores resulting min/max LE power in hdev struct. If command isn't available (< BT5 support), min/max values both default to HCI_TX_POWER_INVALID. This patch is manually verified by ensuring BT5 devices correctly query and receive controller tx power range. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Use intervals and tx power from mgmt cmdsDaniel Winkler
This patch takes the min/max intervals and tx power optionally provided in mgmt interface, stores them in the advertisement struct, and uses them when configuring the hci requests. While tx power is not used if extended advertising is unavailable, software rotation will use the min and max advertising intervals specified by the client. This change is validated manually by ensuring the min/max intervals are propagated to the controller on both hatch (extended advertising) and kukui (no extended advertising) chromebooks, and that tx power is propagated correctly on hatch. These tests are performed with multiple advertisements simultaneously. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Break add adv into two mgmt commandsDaniel Winkler
This patch adds support for the new advertising add interface, with the first command setting advertising parameters and the second to set advertising data. The set parameters command allows the caller to leave some fields "unset", with a params bitfield defining which params were purposefully set. Unset parameters will be given defaults when calling hci_add_adv_instance. The data passed to the param mgmt command is allowed to be flexible, so in the future if bluetoothd passes a larger structure with new params, the mgmt command will ignore the unknown members at the end. This change has been validated on both hatch (extended advertising) and kukui (no extended advertising) chromebooks running bluetoothd that support this new interface. I ran the following manual tests: - Set several (3) advertisements using modified test_advertisement.py - For each, validate correct data and parameters in btmon trace - Verified both for software rotation and extended adv Automatic test suite also run, testing many (25) scenarios of single and multi-advertising for data/parameter correctness. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add helper to set adv dataDaniel Winkler
We wish to handle advertising data separately from advertising parameters in our new MGMT requests. This change adds a helper that allows the advertising data and scan response to be updated for an existing advertising instance. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add toggle to switch off interleave scanHoward Chung
This patch add a configurable parameter to switch off the interleave scan feature. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Refactor read default sys config for various typesHoward Chung
Refactor read default system configuration function so that it's capable of returning different types than u16 Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Handle active scan caseHoward Chung
This patch adds code to handle the active scan during interleave scan. The interleave scan will be canceled when users start active scan, and it will be restarted after active scan stopped. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Handle system suspend resume caseHoward Chung
This patch adds code to handle the system suspension during interleave scan. The interleave scan will be canceled when the system is going to sleep, and will be restarted after waking up. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Interleave with allowlist scanHoward Chung
This patch implements the interleaving between allowlist scan and no-filter scan. It'll be used to save power when at least one monitor is registered and at least one pending connection or one device to be scanned for. The durations of the allowlist scan and the no-filter scan are controlled by MGMT command: Set Default System Configuration. The default values are set randomly for now. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix attempting to set RPA timeout when unsupportedEdward Vear
During controller initialization, an LE Set RPA Timeout command is sent to the controller if supported. However, the value checked to determine if the command is supported is incorrect. Page 1921 of the Bluetooth Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands field corresponds to the LE Set RPA Timeout command, but currently bit 6 of octet 35 is checked. This patch checks the correct value instead. This issue led to the error seen in the following btmon output during initialization of an adapter (rtl8761b) and prevented initialization from completing. < HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2 Timeout: 900 seconds > HCI Event: Command Complete (0x0e) plen 4 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) = Close Index: 00:E0:4C:6B:E5:03 The error did not appear when running with this patch. Signed-off-by: Edward Vear <edwardvear@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Rename get_adv_instance_scan_rspLuiz Augusto von Dentz
This renames get_adv_instance_scan_rsp to adv_instance_is_scannable and make it return a bool since it was not actually properly return the size of the scan response as one could expect. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix not sending Set Extended Scan ResponseLuiz Augusto von Dentz
Current code is actually failing on the following tests of mgmt-tester because get_adv_instance_scan_rsp_len did not account for flags that cause scan response data to be included resulting in non-scannable instance when in fact it should be scannable. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix for Bluetooth SIG test L2CAP/COS/CFD/BV-14-CJimmy Wahlberg
This test case is meant to verify that multiple unknown options is included in the response. BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part A page 1057 'On an unknown option failure (Result=0x0003), the option(s) that contain anoption type field that is not understood by the recipient of the L2CAP_CONFIGURATION_REQ packet shall be included in the L2CAP_CONFIGURATION_RSP packet unless they are hints.' Before this patch: > ACL Data RX: Handle 11 flags 0x02 dlen 24 L2CAP: Configure Request (0x04) ident 18 len 16 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [mandatory] 10 00 11 02 11 00 12 02 12 00 < ACL Data TX: Handle 11 flags 0x00 dlen 17 L2CAP: Configure Response (0x05) ident 18 len 9 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) Option: Unknown (0x10) [mandatory] 12 After this patch: > ACL Data RX: Handle 11 flags 0x02 dlen 24 L2CAP: Configure Request (0x04) ident 5 len 16 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [mandatory] 10 00 11 02 11 00 12 02 12 00 < ACL Data TX: Handle 11 flags 0x00 dlen 23 L2CAP: Configure Response (0x05) ident 5 len 15 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) Option: Unknown (0x10) [mandatory] 10 11 01 11 12 01 12 Signed-off-by: Jimmy Wahlberg <jimmywa@spotify.com> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU optionWei Yongjun
This commit add the invalid check for connected socket, without it will causes the following crash due to sco_pi(sk)->conn being NULL: KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c RSP: 0018:ffff88801bb17d88 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83a4ecdf RDX: 000000000000000a RSI: ffffc90002fce000 RDI: 0000000000000050 RBP: 1ffff11003762fb4 R08: 0000000000000001 R09: ffff88810e1008c0 R10: ffffffffbd695dcf R11: fffffbfff7ad2bb9 R12: 0000000000000000 R13: ffff888018ff1000 R14: dffffc0000000000 R15: 000000000000000d FS: 00007fb4f76c1700(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555e3b7a938 CR3: 00000001117be001 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? sco_skb_put_cmsg+0x80/0x80 ? sco_skb_put_cmsg+0x80/0x80 __sys_getsockopt+0x12a/0x220 ? __ia32_sys_setsockopt+0x150/0x150 ? syscall_enter_from_user_mode+0x18/0x50 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_getsockopt+0xba/0x150 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fc1a726f897 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: fix typo in struct nameReo Shiseki
Signed-off-by: Reo Shiseki <reoshiseki@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-11-11Bluetooth: Replace BT_DBG with bt_dev_dbg in HCI requestHoward Chung
This replaces the BT_DBG function to bt_dev_dbg as it is cleaner to show the controller index in the debug message. Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: consolidate error paths in hci_phy_link_complete_evt()Sergey Shtylyov
hci_phy_link_complete_evt() has several duplicate error paths -- consolidate them, using the *goto* statements. Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: Enforce key size of 16 bytes on FIPS levelArchie Pusaka
According to the spec Ver 5.2, Vol 3, Part C, Sec 5.2.2.8: Device in security mode 4 level 4 shall enforce: 128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened) This patch rejects connection with key size below 16 for FIPS level services. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: hidp: use correct wait queue when removing ctrl_waitOle Bjørn Midtbø
A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Move force_bredr_smp debugfs into hci_debugfs_create_bredrClaire Chang
Avoid multiple attempts to create the debugfs entry, force_bredr_smp, by moving it from the SMP registration to the BR/EDR controller init section. hci_debugfs_create_bredr is only called when HCI_SETUP and HCI_CONFIG is not set. Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Fix: LL PRivacy BLE device fails to connectSathish Narasimman
When adding device to white list the device is added to resolving list also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set. HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices to resolving list. use_ll_privacy macro is used only to check if controller supports LL_Privacy. https://bugzilla.kernel.org/show_bug.cgi?id=209745 Fixes: 0eee35bdfa3b ("Bluetooth: Update resolving list when updating whitelist") Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Resume advertising after LE connectionDaniel Winkler
When an LE connection request is made, advertising is disabled and never resumed. When a client has an active advertisement, this is disruptive. This change adds resume logic for client-configured (non-directed) advertisements after the connection attempt. The patch was tested by registering an advertisement, initiating an LE connection from a remote peer, and verifying that the advertisement is re-activated after the connection is established. This is performed on Hatch and Kukui Chromebooks. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 21:55:01 +0000