summaryrefslogtreecommitdiff
path: root/net/bluetooth/mgmt.c
AgeCommit message (Collapse)Author
2016-10-19Bluetooth: Fix append max 11 bytes of name to scan rsp dataMichał Narajowski
Append maximum of 10 + 1 bytes of name to scan response data. Complete name is appended only if exists and is <= 10 characters. Else append short name if exists or shorten complete name if not. This makes sure name is consistent across multiple advertising instances. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06Bluetooth: Refactor append name and appearanceMichał Narajowski
Use eir_append_data to remove code duplication. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: Fix not updating scan rsp when adv offMichał Narajowski
Scan response data should not be updated unless there is an advertising instance. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: Fix NULL pointer dereference in mgmt contextArek Lichwa
Adds missing callback assignment to cmd_complete in pending management command context. Dump path involves security procedure performed on legacy (pre-SSP) devices with service security requirements set to HIGH (16digits PIN). It fails when shorter PIN is delivered by user. [ 1.517950] Bluetooth: PIN code is not 16 bytes long [ 1.518491] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.518584] IP: [< (null)>] (null) [ 1.518584] PGD 9e08067 PUD 9fdf067 PMD 0 [ 1.518584] Oops: 0010 [#1] SMP [ 1.518584] Modules linked in: [ 1.518584] CPU: 0 PID: 1002 Comm: kworker/u3:2 Not tainted 4.8.0-rc6-354649-gaf4168c #16 [ 1.518584] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.9.3-20160701_074356-anatol 04/01/2014 [ 1.518584] Workqueue: hci0 hci_rx_work [ 1.518584] task: ffff880009ce14c0 task.stack: ffff880009e10000 [ 1.518584] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 1.518584] RSP: 0018:ffff880009e13bc8 EFLAGS: 00010293 [ 1.518584] RAX: 0000000000000000 RBX: ffff880009eed100 RCX: 0000000000000006 [ 1.518584] RDX: ffff880009ddc000 RSI: 0000000000000000 RDI: ffff880009eed100 [ 1.518584] RBP: ffff880009e13be0 R08: 0000000000000000 R09: 0000000000000001 [ 1.518584] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 1.518584] R13: ffff880009e13ccd R14: ffff880009ddc000 R15: ffff880009ddc010 [ 1.518584] FS: 0000000000000000(0000) GS:ffff88000bc00000(0000) knlGS:0000000000000000 [ 1.518584] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.518584] CR2: 0000000000000000 CR3: 0000000009fdd000 CR4: 00000000000006f0 [ 1.518584] Stack: [ 1.518584] ffffffff81909808 ffff880009e13cce ffff880009e0d40b ffff880009e13c68 [ 1.518584] ffffffff818f428d 00000000024000c0 ffff880009e13c08 ffffffff810ca903 [ 1.518584] ffff880009e13c48 ffffffff811ade34 ffffffff8178c31f ffff880009ee6200 [ 1.518584] Call Trace: [ 1.518584] [<ffffffff81909808>] ? mgmt_pin_code_neg_reply_complete+0x38/0x60 [ 1.518584] [<ffffffff818f428d>] hci_cmd_complete_evt+0x69d/0x3200 [ 1.518584] [<ffffffff810ca903>] ? rcu_read_lock_sched_held+0x53/0x60 [ 1.518584] [<ffffffff811ade34>] ? kmem_cache_alloc+0x1a4/0x200 [ 1.518584] [<ffffffff8178c31f>] ? skb_clone+0x4f/0xa0 [ 1.518584] [<ffffffff818f9d81>] hci_event_packet+0x8e1/0x28e0 [ 1.518584] [<ffffffff81a421f1>] ? _raw_spin_unlock_irqrestore+0x31/0x50 [ 1.518584] [<ffffffff810aea3e>] ? trace_hardirqs_on_caller+0xee/0x1b0 [ 1.518584] [<ffffffff818e6bd1>] hci_rx_work+0x1e1/0x5b0 [ 1.518584] [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0 [ 1.518584] [<ffffffff8107e538>] process_one_work+0x268/0x6b0 [ 1.518584] [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0 [ 1.518584] [<ffffffff8107e9c3>] worker_thread+0x43/0x4e0 [ 1.518584] [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0 [ 1.518584] [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0 [ 1.518584] [<ffffffff8108505f>] kthread+0xdf/0x100 [ 1.518584] [<ffffffff81a4297f>] ret_from_fork+0x1f/0x40 [ 1.518584] [<ffffffff81084f80>] ? kthread_create_on_node+0x210/0x210 Signed-off-by: Arek Lichwa <arek.lichwa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Set appearance only for LE capable controllersMichał Narajowski
Setting appearance on controllers without LE support will result in No Supported error. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix missing ext info event when setting appearanceMichał Narajowski
This patch adds missing event when setting appearance, just like in the set local name command. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add supported data types to ext info changed eventMichał Narajowski
This patch adds EIR data to extended info changed event. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add appearance to Read Ext Controller Info commandSzymon Janc
If LE is enabled appearance is added to EIR data. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Factor appending EIR to separate helperMichał Narajowski
This will also be used for Extended Information Event handling. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Refactor read_ext_controller_info handlerSzymon Janc
There is no need to allocate heap for reply only to copy stack data to it. This also fix rp memory leak and missing hdev unlock if kmalloc failed. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Increment management interface revisionSzymon Janc
Increment the mgmt revision due to the recently added Read Extended Controller Information and Set Appearance commands. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix advertising instance validity check for flagsSzymon Janc
Flags are not allowed in Scan Response. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Unify advertising instance flags checkSzymon Janc
This unifies max length and TLV validity checks. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove unused parameter from tlv_data_is_valid functionSzymon Janc
hdev parameter is not used in function. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for appearance in scan rspMichał Narajowski
This patch enables prepending appearance value to scan response data. It also adds support for setting appearance value through mgmt command. If currently advertised instance has apperance flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for local name in scan rspMichał Narajowski
This patch enables appending local name to scan response data. If currently advertised instance has name flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Use kzalloc instead of kmalloc/memsetWei Yongjun
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Append local name and CoD to Extended Controller InfoMichał Narajowski
This adds device class, complete local name and short local name to EIR data in Extended Controller Info as specified in docs. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add framework for Extended Controller InformationMarcel Holtmann
This command is used to retrieve the current state and basic information of a controller. It is typically used right after getting the response to the Read Controller Index List command or an Index Added event (or its extended counterparts). When any of the values in the EIR_Data field changes, the event Extended Controller Information Changed will be used to inform clients about the updated information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
2016-09-19Bluetooth: Use command status event for Set IO Capability errorsMarcel Holtmann
In case of failure, the Set IO Capability command is suppose to return command status and not command complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix wrong Get Clock Information return parametersMarcel Holtmann
The address information of the Get Clock Information return parameters is copying from a different memory location. It uses &cmd->param while it actually needs to be cmd->param. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: mgmt: Fix sending redundant event for Advertising InstanceJohan Hedberg
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Introduce helper to pack mgmt version informationMarcel Holtmann
The mgmt version information will be also needed for the control changell tracing feature. This provides a helper to pack them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-13Bluetooth: Increment management interface revisionJohan Hedberg
Increment the mgmt revision due to the recently added new reason code for the Disconnected event. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-09Bluetooth: Rename HCI_BREDR into HCI_PRIMARYMarcel Holtmann
The HCI_BREDR naming is confusing since it actually stands for Primary Bluetooth Controller. Which is a term that has been used in the latest standard. However from a legacy point of view there only really have been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of Bluetooth introduced Low Energy (LE) and made this terminology a little bit confused since Dual Mode Controllers include BR/EDR and LE. To simplify this the name HCI_PRIMARY stands for the Primary Controller which can be a single mode or dual mode controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-03-11Bluetooth: Fix potential buffer overflow with Add AdvertisingJohan Hedberg
The Add Advertising command handler does the appropriate checks for the AD and Scan Response data, however fails to take into account the general length of the mgmt command itself, which could lead to potential buffer overflows. This patch adds the necessary check that the mgmt command length is consistent with the given ad and scan_rsp lengths. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-03-10Bluetooth: Increment management interface revisionJohan Hedberg
Increment the mgmt revision due to the recently added limited privacy mode. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Add support for limited privacy modeJohan Hedberg
Introduce a limited privacy mode indicated by value 0x02 to the mgmt Set Privacy command. With value 0x02 the kernel will use privacy mode with a resolvable private address. In case the controller is bondable and discoverable the identity address will be used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Add support for Start Limited Discovery commandJohan Hedberg
This patch implements the mgmt Start Limited Discovery command. Most of existing Start Discovery code is reused since the only difference is the presence of a 'limited' flag as part of the discovery state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Change eir_has_data_type() to more generic eir_get_data()Johan Hedberg
To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Clean up current advertising instance trackingJohan Hedberg
We can simplify a lot of code by making sure hdev->cur_adv_instance is always up-to-date. This allows e.g. the removal of the get_current_adv_instance() helper function and the special HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00 explicit in the various calls where advertising instances aren't enabled, e.g. when HCI_ADVERTISING is set or we've just finished enabling LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Remove unnecessary HCI_ADVERTISING_INSTANCE flagJohan Hedberg
This flag just tells us whether hdev->adv_instances is empty or not. We can equally well use the list_empty() function to get this information. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Simplify read_adv_features codeJohan Hedberg
The code in the Read Advertising Features mgmt command handler is unnecessarily complicated. Clean it up and remove unnecessary variables & branches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform HCI update for power on synchronouslyJohan Hedberg
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move fast connectable code to hci_request.cJohan Hedberg
We'll soon need this both in hci_request.c and mgmt.c so move it to hci_request.c as a generic helper. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move EIR update to hci_request.cJohan Hedberg
We'll soon need to update the EIR both from hci_request.c and mgmt.c so move update_eir() as a more generic request helper to hci_request.c. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: HCI name update to hci_request.cJohan Hedberg
We'll soon need this both from hci_request.c and mgmt.c so move it as a request helper function to hci_request.c. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable timeout behind hdev->req_workqueueJohan Hedberg
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable changes to hdev->req_workqueueJohan Hedberg
The discoverable mode is intrinsically linked with the connectable mode e.g. through sharing the same HCI command (Write Scan Enable) for BR/EDR. It makes therefore sense to move it to hci_request.c and run the changes through the same hdev->req_workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform Class of Device changes through hdev->req_workqueueJohan Hedberg
The Class of Device needs to be changed e.g. for limited discoverable mode. In preparation of moving the discoverable mode to hci_request.c and hdev->req_workqueue, move the Class of Device helpers there first. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move connectable changes to hdev->req_workqueueJohan Hedberg
This way the connectable changes are synchronized against each other, which helps avoid potential races. The connectable mode is also linked together with LE advertising which makes is more convenient to have it behind the same workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Run page scan updates through hdev->req_workqueueJohan Hedberg
Since Add/Remove Device perform the page scan updates independently from the HCI command completion we've introduced a potential race when multiple mgmt commands are queued. Doing the page scan updates through the req_workqueue ensures that the state changes are performed in a race-free manner. At the same time, to make the request helper more widely usable, extend it to also cover Inquiry Scan changes since those are behind the same HCI command. This is also reflected in the new name of the API as well as the work struct name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-23Bluetooth: Increment management interface revisionJohan Hedberg
This patch increments the management interface revision due to introduction of a new Get Advertising Size Information command and various other fixes & improvements. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-23Bluetooth: Fix powering on with privacy and advertisingAndrzej Kaczmarek
In order to enable advertising with privacy enabled, SMP has to be registered in order to generate new RPA. During power on, it will be registered at the very end which is the reason why advertising is not enabled and it's not possible to enable it anymore due to mismatch between hci_dev settings and actual controller state. This fixes this problem by moving SMP registration earlier, just after controller is powered (which is ok, because LE SMP will be already able to decide on identity address to be used), but before advertising is enabled. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-22Bluetooth: Add support for Get Advertising Size Information commandMarcel Holtmann
The Get Advertising Size Information command allows to retrieve size information for advertising data and scan response data fields depending on the selected flags. This is useful if applications want to know the available size ahead of time. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-22Bluetooth: Simplify if statements in tlv_data_is_valid functionMarcel Holtmann
The if statements for checking the flags parameter could be written a bit easier to read. This changes this. No functional behavior has been changed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-22Bluetooth: Add instance range check for Add Advertising commandMarcel Holtmann
The instance range check for Add Advertising command is missing. If the provided instance is out of range an Invalid Parameters error should be returned. At the moment, the generic Failed error is returned. This extra check ensures that clear error messages are returned. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-11-19Bluetooth: Fix specifying role for LE connectionsJohan Hedberg
The hci_connect_le_scan() is (as the name implies) a master/central role API, so it makes no sense in passing a role parameter to it. At the same time this patch also fixes the direct advertising support for LE L2CAP sockets where we now call the more appropriate hci_le_connect() API if slave/peripheral role is desired. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 18:39:03 +0000