| Age | Commit message (Collapse) | Author |
|---|
|
It's safer practice to use sizeof(*ptr) instead of sizeof(ptr_type) when
allocating memory in case the type changes. This also fixes the
following style of warnings from static analyzers:
CHECK: Prefer kzalloc(sizeof(*ie)...) over kzalloc(sizeof(struct inquiry_entry)...)
+ ie = kzalloc(sizeof(struct inquiry_entry), GFP_KERNEL);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The EOPNOTSUPP and ENOTSUPP errors are very similar in meaning, but
ENOTSUPP is a fairly new addition to POSIX. Not all libc versions know
about the value the kernel uses for ENOTSUPP so it's better to use
EOPNOTSUPP to ensure understandable error messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Even though our side requests authentication, the original action that
caused it may be remotely triggered, such as an incoming L2CAP or RFCOMM
connect request. To track this information introduce a new hci_conn flag
called HCI_CONN_AUTH_INITIATOR.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
We're interested in whether an authentication request is because of a
remote or local action. So far hci_conn_security() has been used both
for incoming and outgoing actions (e.g. RFCOMM or L2CAP connect
requests) so without some modifications it cannot know which peer is
responsible for requesting authentication.
This patch adds a new "bool initiator" parameter to hci_conn_security()
to indicate which side is responsible for the request and updates the
current users to pass this information correspondingly.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
We need to be able to track slave vs master LE connections in
hci_conn_hash, and to be able to do that we need to know the role of the
connection by the time hci_conn_add_has() is called. This means in
practice the hci_conn_add() call that creates the hci_conn_object.
This patch adds a new role parameter to hci_conn_add() function to give
the object its initial role value, and updates the callers to pass the
appropriate role to it. Since the function now takes care of
initializing both conn->role and conn->out values we can remove some
other unnecessary assignments.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
To make the code more understandable it makes sense to use the new HCI
defines for connection role instead of a "bool master" parameter. This
makes it immediately clear when looking at the function calls what the
last parameter is describing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Having a dedicated u8 role variable in the hci_conn struct greatly
simplifies tracking of the role, since this is the native way that it's
represented on the HCI level.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Many controllers allow simultaneous active scanning and advertising
(e.g. Intel and Broadcom) but some do not (e.g. CSR). It's therefore
safest to implement mutual exclusion of these states in the kernel.
This patch ensures that the two states are never entered simultaneously.
Extra precaution needs to be taken for outgoing connection attempts in
slave role (i.e. through directed advertising) in which case the
operation that came first has precedence and the one that comes after
gets a rejection.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Most controllers do not support advertising while initiating an LE
connection. We also have to first disable current advertising if the
initiation is going to happen through direct advertising. Therefore,
simply stop advertising as the first thing when starting to issue
commands to establish an LE connection.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Now that we have a flag for tracking the real advertising state we
should use that to determine whether it's safe to update the random
address or not. The couple of places that were clearing the flag due to
a pending request need to be updated too.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
If we have both LE scanning and advertising simultaneously enabled we
need a way to tell hci_connect_le() in which role to initiate a
connection. This patch adds a new parameter to the function to give it
the necessary information. For auto-connect and mgmt_pair_device we
always use master role, whereas for L2CAP users (in practice sockets) we
use slave role whenever HCI_ADVERTISING is set and master role
otherwise.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The auth_type value which gets assigned to hci_conn->auth_type is
something that's only used for BR/EDR connections and is of no value for
LE connections. It makes therefore little sense to pass it to the
hci_connect_le() function. This patch removes the parameter from the
function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When we establish connections as a consequence of receiving an
advertising report it makes no sense to wait the normal 20 second LE
connection timeout. This patch modifies the hci_connect_le function to
take an extra timeout value and uses a lower 2 second timeout for the
auto-connection case. This timeout is intentionally chosen to be just a
bit higher than the 1.28 second timeout that High Duty Cycle Advertising
uses.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The caller of hci_le_conn_update is directly interested in knowing what
the best value is for the store_hint parameter of the corresponding
mgmt event. Since hci_le_conn_update knows whether there were stored
parameters that were updated or not we can have it return an initial
store_hint value to the caller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Store the connection latency and supervision timeout default values
with all the other controller defaults. And when needed use them
for new connections.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When the LE connection parameters for connection latency and
supervision timeout are known, then use then. If they are not
know fallback to defaults.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When the slave updates the connection parameters, store also the
connection latency and supervision timeout information in the
internal list of connection parameters for known devices.
Having these values available allowes the auto-connection
procedure to use the correct values from the beginning without
having to request an update on every connection establishment.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
Bluetooth controllers that are marked for raw-only usage can only be
used with user channel access. Any other operation should be rejected.
This simplifies the whole raw-only support since it now depends on
the fact that the controller is marked with HCI_QUIRK_RAW_DEVICE and
runtime raw access is restricted to user channel operation.
The kernel internal processing of HCI commands and events is designed
around the case that either the kernel has full control over the device
or that the device is driven from userspace. This now makes a clear
distinction between these two possible operation modes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
When the connection is in master role and it is going to be
disconnected based on the disconnection timeout, then send
the HCI_Read_Clock_Offset command in an attempt to update the
clock offset value in the inquiry cache.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
The abstraction of disconnect operation via hci_conn_disconnect is not
needed and it does not add any readability. Handle the difference of
AMP physical channels and BR/EDR/LE connection in the timeout callback.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
The hci_amp_disconn function is a local function and there is no
need for a reason parameter. That one can be retrieved from the
hci_conn object easily.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
Since the link_mode member of the hci_conn struct is a bit field and we
already have a flags member as well it makes sense to merge these two
together. This patch moves all used link_mode bits into corresponding
flags. To keep backwards compatibility with user space we still need to
provide a get_link_mode() helper function for the ioctl's that expect a
link_mode style value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When pairing fails hci_conn refcnt drops below zero. This cause that
ACL link is not disconnected when disconnect timeout fires.
Probably this is because l2cap_conn_del calls l2cap_chan_del for each
channel, and inside l2cap_chan_del conn is dropped. After that loop
hci_chan_del is called which also drops conn.
Anyway, as it is desrcibed in hci_core.h, it is known that refcnt
drops below 0 sometimes and it should be fine. If so, let disconnect
link when hci_conn_timeout fires and refcnt is 0 or below. This patch
does it.
This affects PTS test SM_TC_JW_BV_05_C
Logs from scenario:
[69713.706227] [6515] pair_device:
[69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22
[69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8
[69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000
[69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25
[69713.706242] [6515] hci_prepare_cmd: skb len 28
[69713.706243] [6515] hci_req_run: length 1
[69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0
[69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9
[69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1
[69713.706288] [8909] hci_send_frame: hci0 type 1 len 28
[69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28
[69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.711664] [8909] hci_rx_work: hci0
[69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6
[69713.711680] [8909] hci_rx_work: hci0 Event packet
[69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00
[69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d
[69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00
[69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d
[69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.818875] [8909] hci_rx_work: hci0
[69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21
[69713.818913] [8909] hci_rx_work: hci0 Event packet
[69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00
[69713.818922] [8909] hci_send_to_control: len 19
[69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000
[69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800
[69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00
...
[69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10
[69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0
[69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000
[69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0
[69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00
[69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02
[69713.819039] [8909] smp_chan_create:
[69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1
[69713.819043] [8909] smp_send_cmd: code 0x01
[69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000
[69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800
[69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15
[69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800
[69713.819057] [8909] l2cap_le_conn_ready:
[69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00
[69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1
[69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800
[69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800
[69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004
[69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2
[69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2
[69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01
[69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000
[69713.819086] [8909] le_pairing_complete_cb: status 0
[69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0
[69713.819093] [8909] hci_sched_acl: hci0
[69713.819094] [8909] hci_sched_sco: hci0
[69713.819096] [8909] hci_sched_esco: hci0
[69713.819098] [8909] hci_sched_le: hci0
[69713.819099] [8909] hci_chan_sent: hci0
[69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10
[69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7
[69713.819106] [8909] hci_send_frame: hci0 type 2 len 15
[69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15
[69713.819119] [8909] hci_chan_sent: hci0
[69713.819121] [8909] hci_prio_recalculate: hci0
[69713.819123] [8909] process_pending_rx:
[69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400
...
[69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0
[69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000
[69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1
[69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800
[69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800
[69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800
[69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800
[69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800
...
[69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800
[69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800
[69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800
[69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800
[69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800
...
[69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800
[69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800
[69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3
[69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0
[69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000
[69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11
[69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0
[69713.825213] [8909] hci_sched_acl: hci0
[69713.825214] [8909] hci_sched_sco: hci0
[69713.825216] [8909] hci_sched_esco: hci0
[69713.825217] [8909] hci_sched_le: hci0
[69713.825219] [8909] hci_chan_sent: hci0
[69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9
[69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0
[69713.825225] [8909] hci_send_frame: hci0 type 2 len 11
[69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11
[69713.825242] [8909] hci_chan_sent: hci0
[69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.825253] [8909] hci_prio_recalculate: hci0
[69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800
...
[69713.866902] [8909] hci_rx_work: hci0
[69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7
[69713.866928] [8909] hci_rx_work: hci0 Event packet
[69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1
[69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0
[69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.866940] [8909] hci_sched_acl: hci0
...
[69713.866944] [8909] hci_sched_le: hci0
[69713.866953] [8909] hci_chan_sent: hci0
[69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.867840] [28074] hci_rx_work: hci0
[69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7
[69713.867850] [28074] hci_rx_work: hci0 Event packet
[69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1
[69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0
[69713.867860] [28074] hci_sched_acl: hci0
[69713.867861] [28074] hci_sched_sco: hci0
[69713.867862] [28074] hci_sched_esco: hci0
[69713.867863] [28074] hci_sched_le: hci0
[69713.867865] [28074] hci_chan_sent: hci0
[69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69714.145661] [8909] hci_rx_work: hci0
[69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10
[69714.145676] [8909] hci_rx_work: hci0 ACL data packet
[69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002
[69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0
[69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2
[69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006
[69714.145696] [8909] hci_send_to_control: len 14
[69714.145710] [8909] smp_chan_destroy:
[69714.145713] [8909] pairing_complete: status 3
[69714.145714] [8909] cmd_complete: sock ffff88010323ac00
[69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3
[69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800
[69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00
[69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00
...
[69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00
[69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2
[69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13
[69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000
[69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000
[69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3
[69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800
[69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13
[69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4
[69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1
[69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800
[69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3
[69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0
[69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000
[69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00
[69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400
[69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800
[69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800
[69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED
[69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED
[69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2
[69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800
[69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1
[69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00
[69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800
...
[69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0
[69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The conn->link_key variable tracks the type of link key in use. It is
set whenever we respond to a link key request as well as when we get a
link key notification event.
These two events do not however always guarantee that encryption is
enabled: getting a link key request and responding to it may only mean
that the remote side has requested authentication but not encryption. On
the other hand, the encrypt change event is a certain guarantee that
encryption is enabled. The real encryption state is already tracked in
the conn->link_mode variable through the HCI_LM_ENCRYPT bit.
This patch fixes a check for encryption in the hci_conn_auth function to
use the proper conn->link_mode value and thereby eliminates the chance
of a false positive result.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
|
|
The src_type member of struct hci_conn should always reflect the address
type of the src_member. It should never be overridden. There is already
code in place in the command status handler of HCI_LE_Create_Connection
to copy the right initiator address into conn->init_addr_type.
Without this patch, if privacy is enabled, we will send the wrong
address type in the SMP identity address information PDU (it'll e.g.
contain our public address but a random address type).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Conflicts:
drivers/bluetooth/btusb.c
|
|
There are no users of the smp_chan struct outside of smp.c so move it
away from smp.h. The addition of the l2cap.h include to hci_core.c,
hci_conn.c and mgmt.c is something that should have been there already
previously to avoid warnings of undeclared struct l2cap_conn, but the
compiler warning was apparently shadowed away by the mention of
l2cap_conn in the struct smp_chan definition.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds support to store local maximum TX power level for
connection when reply for HCI_Read_Transmit_Power_Level is received.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
|
|
This patch adds support to store local TX power level for connection
when reply for HCI_Read_Transmit_Power_Level is received.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When we're performing reauthentication (in order to elevate the
security level from an unauthenticated key to an authenticated one) we
do not need to issue any encryption command once authentication
completes. Since the trigger for the encryption HCI command is the
ENCRYPT_PEND flag this flag should not be set in this scenario.
Instead, the REAUTH_PEND flag takes care of all necessary steps for
reauthentication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
|
|
When we're in peripheral mode (HCI_ADVERTISING flag is set) the most
natural mapping of connect() is to perform directed advertising to the
peer device.
This patch does the necessary changes to enable directed advertising and
keeps the hci_conn state as BT_CONNECT in a similar way as is done for
central or BR/EDR connection initiation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Any time hci_conn_add is used for an LE connection we need to ensure
that the local identity address is correctly described in the src and
src_type variables. This patch moves setting these values directly into
hci_conn_add so that callers don't have to duplicate the effort
themselves.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In Secure Connections Only mode, it is required that Secure Connections
is used for pairing and that the link key is encrypted with AES-CCM using
a P-256 authenticated combination key. If this is not the case, then new
connection shall be refused or existing connections shall be dropped.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
The use of __constant_<foo> has been unnecessary for quite awhile now.
Make these uses consistent with the rest of the kernel.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The stop_scan_complete function was used as an intermediate step before
doing the actual connection creation. Since we're using hci_request
there's no reason to have this extra function around, i.e. we can simply
put both HCI commands into the same request.
The single task that the intermediate function had, i.e. indicating
discovery as stopped is now taken care of by a new
HCI_LE_SCAN_INTERRUPTED flag which allows us to do the discovery state
update when the stop scan command completes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The discovery process has a timer for disabling scanning, however
scanning might be disabled through other means too like the auto-connect
process. We should therefore ensure that the timer is never active
after sending a HCI command to disable scanning.
There was some existing code in stop_scan_complete trying to avoid the
timer when a connect request interrupts a discovery procedure, but the
other way around was not covered. This patch covers both scenarios by
canceling the timer as soon as we get a successful command complete for
the disabling HCI command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
LE connection attempts do not have a controller side timeout in the same
way as BR/EDR has (in form of the page timeout). Since we always do
scanning before initiating connections the attempts are always expected
to succeed in some reasonable time.
This patch adds a timer which forces a cancellation of the connection
attempt within 20 seconds if it has not been successful by then. This
way we e.g. ensure that mgmt_pair_device times out eventually and gives
an error response.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
We shouldn't update the hci_conn state to BT_CONNECT until the moment
that we're ready to send the initiating HCI command for it. If the
connection has the BT_CONNECT state too early the code responsible for
updating the local random address may incorrectly think there's a
pending connection in progress and refuse to update the address.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The random numbers in Bluetooth Low Energy are 64-bit numbers and should
also be little endian since the HCI specification is little endian.
Change the whole Low Energy pairing to use __le64 instead of a byte
array.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
This patch introduces the LE auto connection infrastructure which
will be used to implement the LE auto connection options.
In summary, the auto connection mechanism works as follows: Once the
first pending LE connection is created, the background scanning is
started. When the target device is found in range, the kernel
autonomously starts the connection attempt. If connection is
established successfully, that pending LE connection is deleted and
the background is stopped.
To achieve that, this patch introduces the hci_update_background_scan()
which controls the background scanning state. This function starts or
stops the background scanning based on the hdev->pend_le_conns list. If
there is no pending LE connection, the background scanning is stopped.
Otherwise, we start the background scanning.
Then, every time a pending LE connection is added we call hci_update_
background_scan() so the background scanning is started (in case it is
not already running). Likewise, every time a pending LE connection is
deleted we call hci_update_background_scan() so the background scanning
is stopped (in case this was the last pending LE connection) or it is
started again (in case we have more pending LE connections). Finally,
we also call hci_update_background_scan() in hci_le_conn_failed() so
the background scan is restarted in case the connection establishment
fails. This way the background scanning keeps running until all pending
LE connection are established.
At this point, resolvable addresses are not support by this
infrastructure. The proper support is added in upcoming patches.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch moves address type conversion (L2CAP address type to HCI
address type) to outside hci_connect_le. This way, we avoid back and
forth address type conversion in a comming patch.
So hci_connect_le() now expects 'dst_type' parameter in HCI address
type convention.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
hci_connect() is a very simple and useless wrapper of hci_connect_acl
and hci_connect_le functions. Addtionally, all places where hci_connect
is called the link type value is passed explicitly. This way, we can
safely delete hci_connect, declare hci_connect_acl and hci_connect_le
in hci_core.h and call them directly.
No functionality is changed by this patch.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch removes hci_create_le_conn() since it is not used anymore.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Some LE controllers don't support scanning and creating a connection
at the same time. So we should always stop scanning in order to
establish the connection.
Since we may prematurely stop the discovery procedure in favor of
the connection establishment, we should also cancel hdev->le_scan_
disable delayed work and set the discovery state to DISCOVERY_STOPPED.
This change does a small improvement since it is not mandatory the
user stops scanning before connecting anymore. Moreover, this change
is required by upcoming LE auto connection mechanism in order to work
properly with controllers that don't support background scanning and
connection establishment at the same time.
In future, we might want to do a small optimization by checking if
controller is able to scan and connect at the same time. For now,
we want the simplest approach so we always stop scanning (even if
the controller is able to carry out both operations).
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds the "hci_" prefix to le_conn_failed() helper and
declares it in hci_core.h so it can be reused in hci_event.c.
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When running active scanning during LE discovery, do not reveal the own
identity to the peer devices. In case LE privacy has been enabled, then
a resolvable private address is used. If the LE privacy option is off,
then use an unresolvable private address.
The public address or static random address is never used in active
scanning anymore. This ensures that scan request are send using a
random address.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
This patch ensures that conn->src_type contains the same address type as
is used for initiating the connection while the connection attempt is in
progress. Once connected this value will be overwritten with the
identity address type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When we initiate LE connections we need to update the local random
address if necessary. This patch updates the LE connection creation
mechanism to use the new hci_update_random_address() function to set the
own_address_type parameter and to update the local random address if
necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
During LE connection establishment the value 0x0000 is used for min/max
connection event length. So use the same value when the peripheral is
requesting an update of the the connection paramters.
For some reason the value 0x0001 got used in the connection update and
0x0000 in the connection creation. Using the same value for both just
makes sense.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
