summaryrefslogtreecommitdiff
path: root/net/bluetooth/Kconfig
AgeCommit message (Collapse)Author
2021-04-06Bluetooth: Add support for reading AOSP vendor capabilitiesMarcel Holtmann
When drivers indicate support for AOSP vendor extension, initialize them and read its capabilities. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-01-27net: remove redundant 'depends on NET'Masahiro Yamada
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-25Bluetooth: Disable High Speed by defaultLuiz Augusto von Dentz
Bluetooth High Speed requires hardware support which is very uncommon nowadays since HS has not pickup interest by the industry. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Replace HTTP links with HTTPS ones: BLUETOOTH SUBSYSTEMAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Introduce debug feature when dynamic debug is disabledMarcel Holtmann
In case dynamic debug is disabled, this feature allows a vendor platform to provide debug statement printing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add framework for Microsoft vendor extensionMiao-chen Chou
Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Move debugfs configuration above the selftestsMarcel Holtmann
This is just a cosmetic clean to move the selftests configuration option to the bottom of the list of options. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-01crypto: skcipher - rename the crypto_blkcipher module and kconfig optionEric Biggers
Now that the blkcipher algorithm type has been removed in favor of skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher, and rename the config options accordingly: CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2 Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-07-26bluetooth: switch to AES libraryArd Biesheuvel
The bluetooth code uses a bare AES cipher for the encryption operations. Given that it carries out a set_key() operation right before every encryption operation, this is clearly not a hot path, and so the use of the cipher interface (which provides the best implementation available on the system) is not really required. In fact, when using a cipher like AES-NI or AES-CE, both the set_key() and the encrypt() operations involve en/disabling preemption as well as stacking and unstacking the SIMD context, and this is most certainly not worth it for encrypting 16 bytes of data. So let's switch to the new lightweight library interface instead. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-28Revert "Bluetooth: Add option for disabling legacy ioctl interfaces"Linus Torvalds
This reverts commit dbbccdc4ced015cdd4051299bd87fbe0254ad351. It turns out that the "legacy" users aren't so legacy at all, and that turning off the legacy ioctl will break the current Qt bluetooth stack for bluetooth LE devices that were released just a couple of months ago. So it's simply not true that this was a legacy interface that hasn't been needed and is only limited to old legacy BT devices. Because I actually read Kconfig help messages, and actively try to turn off features that I don't need, I turned the option off. Then I spent _way_ too much time debugging BLE issues until I realized that it wasn't the Qt and subsurface development that had broken one of my dive computer BLE downloads, but simply my broken kernel config. Maybe in a decade it will be true that this is a legacy interface. And maybe with a better help-text and correct dependencies, this kind of legacy removal might be acceptable. But as things are right now both the commit message and the Kconfig help text were misleading, and the Kconfig option had the wrong dependenencies. There's no reason to keep that broken Kconfig option in the tree. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-30Bluetooth: Add option for disabling legacy ioctl interfacesMarcel Holtmann
The legacy ioctl interfaces are only useful for BR/EDR operation and since Linux 3.4 no longer needed anyway. This options allows disabling them alltogether and use only management interfaces for setup and control. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-08-08Bluetooth: document config optionsPavel Machek
Kernel config options should include useful help text; I had to look up the terms on wikipedia. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-25Bluetooth: convert smp and selftest to crypto kpp APISalvatore Benedetto
* Convert both smp and selftest to crypto kpp API * Remove module ecc as no more required * Add ecdh_helper functions for wrapping kpp async calls This patch has been tested *only* with selftest, which is called on module loading. Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30Bluetooth: Add BT_HS config optionArron Wang
Move A2MP Module under BT_HS config option and allow the user have flexible option to choose the feature only they need a2mp_discover_amp() & a2mp_channel_create() are a2mp module entry point for master and slave, and this is dynamic invoked depends on the userspace or remote request, then we defined their implementation depends on BT_HS config Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-15Bluetooth: Provide option to enable/disable debugfs informationMarcel Holtmann
The Bluetooth controllers can export extensive information about internal states via debugfs. This patch provides an option to choose if these information are provided or not. For backwards compatibility with existing kernel configuration, this option defaults to yes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-12-30Bluetooth: Add skeleton for SMP self-testsJohan Hedberg
This patch adds the initial skeleton and kernel config option for SMP self-tests. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-30Bluetooth: Add support for ECDH test casesJohan Hedberg
This patch adds the test cases for ECDH cryptographic functionality used by Bluetooth Low Energy Secure Connections feature. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-30Bluetooth: Add support for self testing frameworkMarcel Holtmann
This add support for the Bluetooth self testing framework that allows running certain test cases of sample data to ensure correctness of its basic functionality. With this patch only the basic framework will be added. It contains the build magic that allows running this at module loading time or at late_initcall stage when built into the kernel image. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-12-03Bluetooth: Add basic support for AES-CMACJohan Hedberg
Most of the LE Secure Connections SMP crypto functions build on top of the AES-CMAC function. This patch adds access to AES-CMAC in the kernel crypto subsystem by allocating a crypto_hash handle for it in a similar way that we have one for AES-CBC. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02Bluetooth: Introduce BT_BREDR and BT_LE config optionsMarcel Holtmann
The current kernel options do not make it clear which modules are for Bluetooth Classic (BR/EDR) and which are for Bluetooth Low Energy (LE). To make it really clear, introduce BT_BREDR and BT_LE options with proper dependencies into the different modules. Both new options default to y to not create a regression with previous kernel config files. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-07-126lowpan: introduce new net/6lowpan directoryAlexander Aring
This patch moves generic code which is used by bluetooth and ieee802154 6lowpan to a new net/6lowpan directory. This directory contains generic 6LoWPAN code which is shared between bluetooth and ieee802154 MAC-Layer. This is the IPHC - "IPv6 Header Compression" format at the moment. Which is described by RFC 6282 [0]. The BLTE 6LoWPAN draft describes that the IPHC is the same format like IEEE 802.15.4, see [1]. Futuremore we can put more code into this directory which is shared between BLTE and IEEE 802.15.4 6LoWPAN like RFC 6775 or the routing protocol RPL RFC 6550. To avoid naming conflicts I renamed 6lowpan-y to ieee802154_6lowpan-y in net/ieee802154/Makefile. [0] http://tools.ietf.org/html/rfc6282 [1] http://tools.ietf.org/html/draft-ietf-6lowpan-btle-12#section-3.2 [2] http://tools.ietf.org/html/rfc6775 [3] http://tools.ietf.org/html/rfc6550 Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-03Bluetooth: 6LoWPAN: Create a kernel moduleJukka Rissanen
Instead of adding the 6LoWPAN functionality to Bluetooth module, we create a separate kernel module for it. Usage: In the slave side do this: $ modprobe bluetooth_6lowpan $ echo 62 > /sys/kernel/debug/bluetooth/6lowpan_psm $ hciconfig hci0 leadv In the master side do this: $ modprobe bluetooth_6lowpan $ echo 62 > /sys/kernel/debug/bluetooth/6lowpan_psm $ echo 'connect E0:06:E6:B7:2A:73 1' > \ /sys/kernel/debug/bluetooth/6lowpan_control The 6LoWPAN functionality can be controlled by psm value. If it is left to 0, then the module is disabled and all the 6LoWPAN connections are dropped if there were any. In the above example, the psm value is just an example and not a real value for 6LoWPAN service. The real psm value is yet to be defined in Bluetooth specification. The 6lowpan controlling interface is a temporary solution until the specifications are ready. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-13Bluetooth: make sure 6LOWPAN_IPHC is built-in if neededArnd Bergmann
Commit 975508879 "Bluetooth: make bluetooth 6lowpan as an option" ensures that 6LOWPAN_IPHC is turned on when we have BT_6LOWPAN enabled in Kconfig, but it allows building the IPHC code as a loadable module even if the entire Bluetooth stack is built-in, and that causes a link error. We can solve that by moving the 'select' statement into CONFIG_BT, which is a "tristate" option to enforce that 6LOWPAN_IPHC can only be a module if BT also is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-11Bluetooth: make bluetooth 6lowpan as an optionAlexander Aring
Currently you can have bluetooth 6lowpan without ipv6 enabled. This doesn't make any sense. With this patch you can disable/enable bluetooth 6lowpan support at compile time. The current bluetooth 6lowpan implementation doesn't check the return value of 6lowpan function. Nevertheless I added -EOPNOTSUPP as return value if 6lowpan bluetooth is disabled. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-01-15net: move 6lowpan compression code to separate moduleDmitry Eremin-Solenikov
IEEE 802.15.4 and Bluetooth networking stacks share 6lowpan compression code. Instead of introducing Makefile/Kconfig hacks, build this code as a separate module referenced from both ieee802154 and bluetooth modules. This fixes the following build error observed in some kernel configurations: net/built-in.o: In function `header_create': 6lowpan.c:(.text+0x166149): undefined reference to `lowpan_header_compress' net/built-in.o: In function `bt_6lowpan_recv': (.text+0x166b3c): undefined reference to `lowpan_process_data' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24Bluetooth: trivial: Remove newline before EOFSyam Sidhardhan
Trivial fix. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: AMP: Add AMP key calculationAndrei Emeltchenko
Function calculates AMP keys using hmac_sha256 helper. Calculated keys are Generic AMP Link Key (gamp) and Dedicated AMP Link Key with keyID "802b" for 802.11 PAL. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-02-29Bluetooth: Fix Kconfig help descriptionAndre Guedes
SMP is not a kernel module, it is part of Bluetooth Core (as already described in lines above). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2011-12-21Bluetooth: Always compile SCO and L2CAP in Bluetooth CoreUlisses Furquim
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-27bluetooth: uses crypto interfaces, select CRYPTORandy Dunlap
Recent changes to hci_core.c use crypto interfaces, so select CRYPTO to make sure that those interfaces are present. Fixes these build errors when CRYPTO is not enabled: net/built-in.o: In function `hci_register_dev': (.text+0x4cf86): undefined reference to `crypto_alloc_base' net/built-in.o: In function `hci_unregister_dev': (.text+0x4f912): undefined reference to `crypto_destroy_tfm' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-13Bluetooth: Add support for using the crypto subsystemVinicius Costa Gomes
This will allow using the crypto subsystem for encrypting data. As SMP (Security Manager Protocol) is implemented almost entirely on the host side and the crypto module already implements the needed methods (AES-128), it makes sense to use it. There's now a new module option to enable/disable SMP support. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-28Bluetooth: Fix BT_L2CAP and BT_SCO in KconfigGustavo F. Padovan
If we want something "bool" built-in in something "tristate" it can't "depend on" the tristate config option. Report by DaveM: I give it 'y' just to make it happen, for both, and afterways no matter how many times I rerun "make oldconfig" I keep seeing things like this in my build: scripts/kconfig/conf --silentoldconfig Kconfig include/config/auto.conf:986:warning: symbol value 'm' invalid for BT_SCO include/config/auto.conf:3156:warning: symbol value 'm' invalid for BT_L2CAP Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-14Bluetooth: Merge L2CAP and SCO modules into bluetooth.koGustavo F. Padovan
Actually doesn't make sense have these modules built separately. The L2CAP layer is needed by almost all Bluetooth protocols and profiles. There isn't any real use case without having L2CAP loaded. SCO is only essential for Audio transfers, but it is so small that we can have it loaded always in bluetooth.ko without problems. If you really doesn't want it you can disable SCO in the kernel config. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-08Bluetooth: update Bluetooth daemon name in Kconfig helpGustavo F. Padovan
Change hcid to bluetoothd. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-07-21Bluetooth: Remove L2CAP Extended Features from KconfigGustavo F. Padovan
This reverts commit 84fb0a6334af0ccad3544f6972c055d90fbb9fbe which adds the L2CAP Extended Features to the Kconfig, that is actually not needed. One can use other mechanisms to enable L2CAP Extended Features. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-05-10Bluetooth: Add Kconfig option for L2CAP Extended FeaturesGustavo F. Padovan
The L2CAP Extended Features are still unstable and under development, so we are adding them under the EXPERIMENTAL flag to get more feedback on them. L2CAP Extended Features includes the Enhanced Retransmission and Streaming Modes, Frame Check Sequence (FCS), and Segmentation and Reassemby (SAR). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24Bluetooth: Add missing selection of CONFIG_CRC16 for L2CAP layerRandy Dunlap
Fix net/bluetooth/l2cap.c build errors: l2cap.c:(.text+0x126035): undefined reference to `crc16' l2cap.c:(.text+0x126323): undefined reference to `crc16' l2cap.c:(.text+0x12668e): undefined reference to `crc16' l2cap.c:(.text+0x12683b): undefined reference to `crc16' l2cap.c:(.text+0x126956): undefined reference to `crc16' net/built-in.o:l2cap.c:(.text+0x129041): more undefined references to `crc16' follow Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-06-14Bluetooth: Fix Kconfig issue with RFKILL integrationMarcel Holtmann
Since the re-write of the RFKILL subsystem it is no longer good to just select RFKILL, but it is important to add a proper depends on rule. Based on a report by Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10[S390] Kconfig: unwanted menus for s390.Martin Schwidefsky
Disable some more menus in the configuration files that are of no interest to a s390 machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 04:31:56 +0000