summaryrefslogtreecommitdiff
path: root/net/batman-adv/soft-interface.c
AgeCommit message (Collapse)Author
2016-08-09batman-adv: Remove orig_node reference handling from send_skb_unicastSven Eckelmann
The function batadv_send_skb_unicast is not acquiring a reference for an orig_node nor removing it from any datastructure. It still reduces the reference counter for an object which is still in the hands of the caller. This is confusing and can lead in the future to problems in the reference handling of the caller function. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Revert "postpone sysfs removal when unregistering"Sven Eckelmann
Postponing the removal of the interface breaks the expected behavior of NETDEV_UNREGISTER and NETDEV_PRE_TYPE_CHANGE. This is especially problematic when an interface is removed and added in quick succession. This reverts commit 5bc44dc8458c ("batman-adv: postpone sysfs removal when unregistering"). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04Merge tag 'batadv-next-for-davem-20160704' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - Cleanup work by Markus Pargmann and Sven Eckelmann (six patches) - Initial Netlink support by Matthias Schiffer (two patches) - Throughput Meter implementation by Antonio Quartulli, a kernel-space traffic generator to estimate link speeds. This feature is useful on low-end WiFi APs where running iperf or netperf from userspace gives wrong results due to heavy userspace/kernelspace overhead. (two patches) - API clean-up work by Antonio Quartulli (one patch) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04batman-adv: throughput meter implementationAntonio Quartulli
The throughput meter module is a simple, kernel-space replacement for throughtput measurements tool like iperf and netperf. It is intended to approximate TCP behaviour. It is invoked through batctl: the protocol is connection oriented, with cumulative acknowledgment and a dynamic-size sliding window. The test *can* be interrupted by batctl. A receiver side timeout avoids unlimited waitings for sender packets: after one second of inactivity, the receiver abort the ongoing test. Based on a prototype from Edo Monticelli <montik@autistici.org> Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-01Merge tag 'batadv-next-for-davem-20160701' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes: - two patches with minimal clean up work by Antonio Quartulli and Simon Wunderlich - eight patches of B.A.T.M.A.N. V, API and documentation clean up work, by Antonio Quartulli and Marek Lindner - Andrew Lunn fixed the skb priority adoption when forwarding fragmented packets (two patches) - Multicast optimization support is now enabled for bridges which comes with some protocol updates, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30batman-adv: Adding logging of mcast flag changesLinus Lüssing
With this patch changes relevant to a node's own multicast flags are printed to the 'mcast' log level. Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move bat_algo functions into a separate fileSven Eckelmann
The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move GW mode and selection class to private data structureAntonio Quartulli
To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-29batman-adv: Clean up untagged vlan when destroying via rtnl-linkSven Eckelmann
The untagged vlan object is only destroyed when the interface is removed via the legacy sysfs interface. But it also has to be destroyed when the standard rtnl-link interface is used. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10batman-adv: replace ethertype variable with ETH_P_BATMAN for readabilityMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Create batman soft interfaces within correct netns.Andrew Lunn
When creating a soft interface, create it in the same netns as the hard interface. Replace all references to init_net with the correct name space for the interface being manipulated. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: NETIF_F_NETNS_LOCAL feature to prevent netns movesAndrew Lunn
The batX soft interface should not be moved between network name spaces. This is similar to bridges, bonds, tunnels, which are not allowed to move between network namespaces. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove hdr_size skb size check in batadv_interface_rxSven Eckelmann
The callers of batadv_interface_rx have to make sure that enough data can be pulled from the skb when they read the batman-adv header. The only two functions using it are either calling pskb_may_pull with hdr_size directly (batadv_recv_bcast_packet) or indirectly via batadv_check_unicast_packet (batadv_recv_unicast_packet). Reported-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove unused parameter recv_if of batadv_interface_rxSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04batman-adv: Add kernel-doc for batadv_interface_rxSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04batman-adv: fix wrong names in kerneldocAntonio Quartulli
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-24batman-adv: Check skb size before using encapsulated ETH+VLAN headerSven Eckelmann
The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 420193573f11 ("batman-adv: softif bridge loop avoidance") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_softif_vlan *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_softif_vlan to krefSven Eckelmann
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc of main functionsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc parsing of return descriptionSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix names in kerneldoc of functionsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-08-27batman-adv: Add lower layer needed_(head|tail)room to own onesSven Eckelmann
The maximum of hard_header_len and maximum of all needed_(head|tail)room of all slave interfaces of a batman-adv device must be used to define the batman-adv device needed_(head|tail)room. This is required to avoid too small buffer problems when these slave devices try to send the encapsulated packet in a tx path without the possibility to resize the skbuff. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-18net: batman-adv: convert to using IFF_NO_QUEUEPhil Sutter
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - avoid integer overflow in GW selection routine - prevent race condition by making capability bit changes atomic (use clear/set/test_bit) - fix synchronization issue in mcast tvlv handler - fix crash on double list removal of TT Request objects - fix leak by puring packets enqueued for sending upon iface removal - ensure network header pointer is set in skb ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14batman-adv: Fix potentially broken skb network header accessLinus Lüssing
The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05batman-adv: fix kernel crash due to missing NULL checksMarek Lindner
batadv_softif_vlan_get() may return NULL which has to be verified by the caller. Fixes: 35df3b298fc8 ("batman-adv: fix TT VLAN inconsistency on VLAN re-add") Reported-by: Ryan Thompson <ryan@eero.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: change the MAC of each VLAN upon ndo_set_mac_addressAntonio Quartulli
The MAC address of the soft-interface is used to initialise the "non-purge" TT entry of each existing VLAN. Therefore when the user invokes ndo_set_mac_address() all the "non-purge" TT entries have to be updated, not only the one belonging to the non-tagged network. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: checkpatch - comparison to NULL could be rewrittenMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: Use safer default config for optional featuresSven Eckelmann
The current default settings for optional features in batman-adv seems to be based around the idea that the user only compiles what he requires. They will automatically enabled when they are compiled in. For example the network coding part of batman-adv is by default disabled in the out-of-tree module but will be enabled when the code is compiled during the module build. But distributions like Debian just enable all features of the batman-adv kernel module and hope that more experimental features or features with possible negative effects have to be enabled using some runtime configuration interface. The network_coding feature can help in specific setups but also has drawbacks and is not disabled by default in the out-of-tree module. Disabling by default in the runtime config seems to be also quite sane. The bridge_loop_avoidance is the only feature which is disabled by default but may be necessary even in simple setups. Packet loops may even be created during the initial node setup when this is not enabled. This is different than STP on bridges because mesh is usually used on Adhoc WiFi. Having two nodes (by accident) in the same LAN segment and in the same mesh network is rather common in this situation. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: checkpatch - Please don't use multiple blank linesAntonio Quartulli
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-08-05batman-adv: increase default hop penaltySimon Wunderlich
The default hop penalty is currently set to 15, which is applied like that for multi interface devices (e.g. dual band APs). Single band devices will still use an effective penalty of 30 (hop penalty + wifi penalty). After receiving reports of too long paths in mesh networks with dual band APs which were fixed by increasing the hop penalty, we'd like to suggest to increase that default value in the default setting as well. We've evaluated that increase in a handful of medium sized mesh networks (5-20 nodes) with single and dual band devices, with changes for the better (shorter routes, higher throughput) or no change at all. This patch changes the hop penalty to 30, which will give an effective penalty of 60 on single band devices (hop penalty + wifi penalty). Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/infiniband/hw/cxgb4/device.c The cxgb4 conflict was simply overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21batman-adv: fix TT VLAN inconsistency on VLAN re-addAntonio Quartulli
When a VLAN interface (on top of batX) is removed and re-added within a short timeframe TT does not have enough time to properly cleanup. This creates an internal TT state mismatch as the newly created softif_vlan will be initialized from scratch with a TT client count of zero (even if TT entries for this VLAN still exist). The resulting TT messages are bogus due to the counter / tt client listing mismatch, thus creating inconsistencies on every node in the network To fix this issue destroy_vlan() has to not free the VLAN object immediately but it has to be kept alive until all the TT entries for this VLAN have been removed. destroy_vlan() still removes the sysfs folder so that the user has the feeling that everything went fine. If the same VLAN is re-added before the old object is free'd, then the latter is resurrected and re-used. Implement such behaviour by increasing the reference counter of a softif_vlan object every time a new local TT entry for such VLAN is created and remove the object from the list only when all the TT entries have been destroyed. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-22batman-adv: Send multicast packets to nodes with a WANT_ALL flagLinus Lüssing
With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast supportLinus Lüssing
With this patch a node may additionally perform the dropping or unicasting behaviour for a link-local IPv4 and link-local-all-nodes IPv6 multicast packet, too. The extra counter and BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag is needed because with a future bridge snooping support integration a node with a bridge on top of its soft interface is not able to reliably detect its multicast listeners for IPv4 link-local and the IPv6 link-local-all-nodes addresses anymore (see RFC4541, section 2.1.2.2 and section 3). Even though this new flag does make "no difference" now, it'll ensure a seamless integration of multicast bridge support without needing to break compatibility later. Also note, that even with multicast bridge support it won't be possible to optimize 224.0.0.x and ff02::1 towards nodes with bridges, they will always receive these ranges. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Modified forwarding behaviour for multicast packetsLinus Lüssing
With this patch a multicast packet is not always simply flooded anymore, the behaviour for the following cases is changed to reduce unnecessary overhead: If all nodes within the horizon of a certain node have signalized multicast listener announcement capability then an IPv6 multicast packet with a destination of IPv6 link-local scope (excluding ff02::1) coming from the upstream of this node... * ...is dropped if there is no according multicast listener in the translation table, * ...is forwarded via unicast if there is a single node with interested multicast listeners * ...and otherwise still gets flooded. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Announce new capability via multicast TVLVLinus Lüssing
If the soft interface of a node is not part of a bridge then a node announces a new multicast TVLV: The existence of this TVLV signalizes that this node is announcing all of its multicast listeners via the translation table infrastructure. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: call unregister_netdev() to have it handle the locking for usMarek Lindner
Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli
On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>