summaryrefslogtreecommitdiff
path: root/net/batman-adv/routing.c
AgeCommit message (Collapse)Author
2014-02-17batman-adv: free skb on TVLV parsing successAntonio Quartulli
When the TVLV parsing routine succeed the skb is left untouched thus leading to a memory leak. Fix this by consuming the skb in case of success. Introduced by ef26157747d42254453f6b3ac2bd8bd3c53339c3 ("batman-adv: tvlv - basic infrastructure") Reported-by: Russel Senior <russell@personaltelco.net> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Tested-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-02-17batman-adv: properly check pskb_may_pull return valueAntonio Quartulli
pskb_may_pull() returns 1 on success and 0 in case of failure, therefore checking for the return value being negative does not make sense at all. This way if the function fails we will probably read beyond the current skb data buffer. Fix this by doing the proper check. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add bonding againSimon Wunderlich
With the new interface alternating, the first hop may send packets in a round robin fashion to it's neighbors because it has multiple valid routes built by the multi interface optimization. This patch enables the feature if bonding is selected. Note that unlike the bonding implemented before, this version is much simpler and may even enable multi path routing to a certain degree. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: remove bonding and interface alternatingSimon Wunderlich
Remove bonding and interface alternating code - it will be replaced by a new, network-wide multi interface optimization which enables both bonding and interface alternating in a better way. Keep the sysfs and find router function though, this will be needed later. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08batman-adv: don't switch byte order too often if not neededAntonio Quartulli
If possible, operations like ntohs/ntohl should not be performed too often. Use a variable to locally store the converted value and then use it. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-12-28batman-adv: fix size of batadv_icmp_headerAntonio Quartulli
struct batadv_icmp_header currently has a size of 17, which will be padded to 20 on some architectures. Fix this by unrolling the header into the parent structures. Moreover keep the ICMP parsing functions as generic as they are now by using a stub icmp_header struct during packet parsing. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23batman-adv: generalize batman-adv icmp packet handlingSimon Wunderlich
Instead of handling icmp packets only up to length of icmp_packet_rr, the code should handle any icmp length size. Therefore the length truncating is moved to when the packet is actually sent to userspace (this does not support lengths longer than icmp_packet_rr yet). Longer packets are forwarded without truncating. This patch also cleans up some parts where the icmp header struct could be used instead of other icmp_packet(_rr) structs to make the code more readable. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23batman-adv: adapt bonding to use the new API functionsAntonio Quartulli
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: make struct batadv_neigh_node algorithm agnosticAntonio Quartulli
some of the fields in struct batadv_neigh_node are strictly related to the B.A.T.M.A.N. IV algorithm. In order to make the struct usable by any routing algorithm it has to be split and made more generic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: make the TT global purge routine VLAN specificAntonio Quartulli
Instead of unconditionally removing all the TT entries served by a given originator, make tt_global_orig_del() remove only entries matching a given VLAN identifier provided as argument. If such argument is negative all the global entries served by the originator are removed. This change is used into the BLA code to purge entries served by a newly discovered Backbone node, but limiting the operation only to those connected to the VLAN where the backbone has been discovered. Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: add the VLAN ID attribute to the TT entryAntonio Quartulli
To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: create common header for ICMP packetsAntonio Quartulli
the icmp and the icmp_rr packets share the same initial fields since they use the same code to be processed and forwarded. Extract the common fields and put them into a separate struct so that future ICMP packets can be easily added without bloating the packet definition. However, keep the seqno field outside of the newly created common header because future ICMP types may require a bigger sequence number space. This change breaks compatibility due to fields reordering in the ICMP headers. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: Receive fragmented packets and mergeMartin Hundebøll
Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: Remove old fragmentation codeMartin Hundebøll
Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: only add recordroute information to icmp request/replySimon Wunderlich
Adding host information for record route is only required for ICMP requests and replys, and should not be added to just any (future?) packet type. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: reorder packet typesSimon Wunderlich
Reordering the packet type numbers allows us to handle unicast packets in a general way - even if we don't know the specific packet type, we can still forward it. There was already code handling this for a couple of unicast packets, and this is the more generalized version to do that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packetsMarek Lindner
Instead of generating roaming specific packets the TVLV unicast API is used to send roaming information. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - convert tt query packet to use tvlv unicast packetsMarek Lindner
Instead of generating TT specific packets the TVLV unicast API is used to send translation table data. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - basic infrastructureMarek Lindner
The goal is to provide the infrastructure for sending, receiving and parsing information 'containers' while preserving backward compatibility. TVLV (based on the commonly known Type Length Value technique) was chosen as the format for those containers. Even if a node does not know the tvlv type of a certain container it can simply skip the current container and proceed with the next. Past experience has shown features evolve over time, so a 'version' field was added right from the start to allow differentiating between feature variants - hence the name: T(ype) V(ersion) L(ength) V(alue). This patch introduces the basic TVLV infrastructure: * register / unregister tvlv containers to be sent with each OGM (on primary interfaces only) * register / unregister callback handlers to be called upon finding the corresponding tvlv type in a tvlv buffer * unicast tvlv send / receive API calls Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-08-28batman-adv: set skb priority according to contentSimon Wunderlich
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: Move call to batadv_nc_skb_forward() from routing.c to send.cMartin Hundebøll
The call to batadv_nc_skb_forward() fits better in batadv_send_skb_to_orig(), as this is where the actual next hop is looked up. To let the caller of batadv_send_skb_to_orig() know wether the skb is transmitted, buffered or failed, the return value is changed from boolean to int. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: move batadv_slide_own_bcast_window to bat_iv_ogm.cAntonio Quartulli
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c and it is currently touching only batman_iv specific attributes. Move it into bat_iv_ogm.c and make it static. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: use eth_hdr() when it makes senseAntonio Quartulli
Instead of casting the result of skb_mac_header() to "struct ethhdr *" every time, the eth_hdr inline function can be use to beautify the code and improve its readability. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/net/ethernet/emulex/benet/be.h include/net/tcp.h net/mac802154/mac802154.h Most conflicts were minor overlapping stuff. The be2net driver brought in some fixes that added __vlan_put_tag calls, which in net-next take an additional argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22batman-adv: use the proper header len when checking the TTVNAntonio Quartulli
Unicast packet might be of type either UNICAST or UNICAST4ADDR. In the two cases the header size is different, but the mechanism checking the TTVN field was assuming it to be always of the same type (UNICAST), so failing to access the inner Ethernet header in case of UNICAST4ADDR. Fix this by passing the real header length as argument. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-17batman-adv: make is_my_mac() check for the current mesh onlyAntonio Quartulli
On a multi-mesh node (a node running more than one batman-adv virtual interface) batadv_is_my_mac() has to check MAC addresses of hard interfaces belonging to the current mesh only. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-13batman-adv: network coding - save overheard and tx packets for decodingMartin Hundebøll
To be able to decode a network coded packet, a node must already know one of the two coded packets. This is done by buffering skbs before transmission and buffering packets sniffed with promiscuous mode from other hosts. Packets are kept in a buffer similar to the one with forward-skbs: A hash table, where each entry, which corresponds to a src-dst pair, has a linked list packets. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - buffer unicast packets before forwardMartin Hundebøll
Two be able to network code two packets, one packet must be buffered until the next is available. This is done in a "coding buffer", which is essentially a hash table with lists of packets. Each entry in the hash table corresponds to a specific src-dst pair, which has a linked list of packets that are buffered. This patch adds skbs to the buffer just before forwarding them. The buffer is traversed every 10 ms, where timed skbs are removed from the buffer and transmitted. To allow experiments with the network coding scheme, the timeout is tunable through a file in debugfs. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: Return reason for failure in batadv_check_unicast_packet()Martin Hundebøll
batadv_check_unicast_packet() is changed to return a value based on the reason to drop the packet, which will be useful information for future users of batadv_check_unicast_packet(). Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-12batman-adv: remove useless blank lines before and after bracketsAntonio Quartulli
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-21batman-adv: Fix broadcast duplist for fragmentationSimon Wunderlich
If the skb is fragmented, the checksum must be computed on the individual fragments, just using skb->data may fail on fragmented data. Instead of doing linearizing the packet, use the new batadv_crc32 to do that more efficiently- it should not hurt replacing the old crc16 by the new crc32. Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-21batman-adv: Add wrapper to look up neighbor and send skbMartin Hundebøll
By adding batadv_send_skb_to_orig() in send.c, we can remove duplicate code that looks up the next hop and then calls batadv_send_skb_packet(). Furthermore, this prepares the upcoming new implementation of fragmentation, which requires the next hop to route packets. Please note that this doesn't entirely remove the next-hop lookup in routing.c and unicast.c, since it is used by the current fragmentation code. Also note that the next-hop info is removed from debug messages in translation-table.c, since it is looked up elsewhere. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-14batman-adv: substitute tt_poss_change with a per-tt_entry flagAntonio Quartulli
tt_poss_change is a node-wide flag which tells whether the node is in a roaming state (a client recently moved to/away from it) in order to let it apply special re-routing rules. However this flag does not give a clear idea of the current state because it is not possible to understand *which client* is actually involved in the roaming. For this reason a better approach has been chosen: instead of using a node-wide variable, the roaming state is now given by a per-tt_entry ROAM flag which, in case of packet coming through the node, tells the node whether the real destination is in roaming state or not. With this flag change, batadv_check_unicast_ttvn() has also been rearranged in order to better fit the new re-routing logic and to be much more readable. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: enable fast client detection using unicast_4addr packetsAntonio Quartulli
The "early client detection mechanism" can be extended to find new clients by means of unicast_4addr packets. The unicast_4addr packet contains as well as the broadcast packet (which is currently used in this mechanism) the address of the originating node and can therefore be used to install new entries in the Global Translation Table Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-07batman-adv: Add get_ethtool_stats() support for DATMartin Hundebøll
Added additional counters for D.A.T. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - add snooping functions for ARP messagesAntonio Quartulli
In case of an ARP message going in or out the soft_iface, it is intercepted and a special action is performed. In particular the DHT helper functions previously implemented are used to store all the ARP entries belonging to the network in order to provide a fast and unicast lookup instead of the classic broadcast flooding mechanism. Each node stores the entries it is responsible for (following the DHT rules) in its soft_iface ARP table. This makes it possible to reuse the kernel data structures and functions for ARP management. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: add UNICAST_4ADDR packet typeAntonio Quartulli
The current unicast packet type does not contain the orig source address. This patches add a new unicast packet (called UNICAST_4ADDR) which provides two new fields: the originator source address and the subtype (the type of the data contained in the packet payload). The former is useful to identify the node which injected the packet into the network and the latter is useful to avoid creating new unicast packet types in the future: a macro defining a new subtype will be enough. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: check for more space before accessing the skbAntonio Quartulli
In batadv_check_unicast_ttvn() the code accesses both the unicast header and the Ethernet header in the payload. For this reason pskb_may_pull() must be invoked to check for the required space. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: print packets re-routing on DBG_TT and ratelimit itAntonio Quartulli
To simplify TranslationTable debugging it is better to print the packet rerouting message on the DBG_TT log level. In this way a developer interested in packets rerouting doesn't need to filter it out of the whole ROUTES log. Moreover, since this message will appear for each rerouted message, it is now "ratelimited". Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: Only increase refcounter once for alternate routerSven Eckelmann
The test whether we can use a router for alternating bonding should only be done once because it is already known that it is still usable and will not be deleted from the list soon. This patch addresses Coverity #712285: Unchecked return value Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: use check_unicast_packet() in recv_roam_adv()Antonio Quartulli
To avoid code duplication and to simplify further changes, check_unicast_packet() is now used in recv_roam_adv() to check for not well formed packets and so discard them. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-18batman-adv: Fix broadcast packet CRC calculationLinus Lüssing
So far the crc16 checksum for a batman-adv broadcast data packet, received on a batman-adv hard interface, was calculated over zero bytes of its content leading to many incoming broadcast data packets wrongly being dropped (60-80% packet loss). This patch fixes this issue by calculating the crc16 over the actual, complete broadcast payload. The issue is a regression introduced by ("batman-adv: add broadcast duplicate check"). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>