summaryrefslogtreecommitdiff
path: root/net/9p
AgeCommit message (Collapse)Author
2010-10-219p: client code cleanupstephen hemminger
Make p9_client_version static since only used in one file. Remove p9_client_auth because it is defined but never used. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
2010-10-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/Kconfig net/ipv4/tcp_timer.c
2010-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
2010-09-27net/9p: Mount only matching virtio channelsSven Eckelmann
p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net/9p: fix memory handling/allocation in rdma_request()Davidlohr Bueso
Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-23net: return operator cleanupEric Dumazet
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-13fs/9p, net/9p: memory leak fixesLatchesar Ionkov
Four memory leak fixes in the 9P code. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-09-06net/9p/trans_fd.c: Fix unsigned return typeJulia Lawall
The function has an unsigned return type, but returns a negative constant to indicate an error condition. The result of calling the function is always stored in a variable of type (signed) int, and thus unsigned can be dropped from the return type. A sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ identifier f; constant C; @@ unsigned f(...) { <+... * return -C; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-02fs/9p: destroy fid on failed removeAneesh Kumar K.V
9P spec says: "It is correct to consider remove to be a clunk with the side effect of removing the file if permissions allow. " So even if remove fails we need to destroy the fid. Without this patch an rmdir on a directory with contents leave the new cloned directory fid fid attached to fidlist. On umount we dump the fids on the fidlist ~# rmdir /mnt2/test4/ rmdir: failed to remove `/mnt2/test4/': Directory not empty ~# umount /mnt2/ ~# dmesg [ 228.474323] Found fid 3 not clunked Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02net/9p: Implement TXATTRCREATE 9p callAneesh Kumar K.V
TXATTRCREATE: Prepare a fid for setting xattr value on a file system object. size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4] size[4] RXATTRCREATE tag[2] txattrcreate gets a fid pointing to xattr. This fid can later be used to set the xattr value. flag value is derived from set Linux setxattr. The manpage says "The flags parameter can be used to refine the semantics of the operation. XATTR_CREATE specifies a pure create, which fails if the named attribute exists already. XATTR_REPLACE specifies a pure replace operation, which fails if the named attribute does not already exist. By default (no flags), the extended attribute will be created if need be, or will simply replace the value if the attribute exists." The actual setxattr operation happens when the fid is clunked. At that point the written byte count and the attr_size specified in TXATTRCREATE should be same otherwise an error will be returned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-02net/9p: Implement attrwalk 9p callAneesh Kumar K.V
TXATTRWALK: Descend a ATTR namespace size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s] size[4] RXATTRWALK tag[2] size[8] txattrwalk gets a fid pointing to xattr. This fid can later be used to read the xattr value. If name is NULL the fid returned can be used to get the list of extended attribute associated to the file system object. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Implement LOPENM. Mohan Kumar
Implement 9p2000.L version of open(LOPEN) interface in 9p client. For LOPEN, no need to convert the flags to and from 9p mode to VFS mode. Synopsis: size[4] Tlopen tag[2] fid[4] mode[4] size[4] Rlopen tag[2] qid[13] iounit[4] [Fix mode bit format - jvrao@linux.vnet.ibm.com] Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02fs/9p: This patch implements TLCREATE for 9p2000.L protocol.Venkateswararao Jujjuri (JV)
SYNOPSIS size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4] size[4] Rlcreate tag[2] qid[13] iounit[4] DESCRIPTION The Tlreate request asks the file server to create a new regular file with the name supplied, in the directory (dir) represented by fid. The mode argument specifies the permissions to use. New file is created with the uid if the fid and with supplied gid. The flags argument represent Linux access mode flags with which the caller is requesting to open the file with. Protocol allows all the Linux access modes but it is upto the server to allow/disallow any of these acess modes. If the server doesn't support any of the access mode, it is expected to return error. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Implement TMKDIRM. Mohan Kumar
Implement TMKDIR as part of 2000.L Work Synopsis size[4] Tmkdir tag[2] fid[4] name[s] mode[4] gid[4] size[4] Rmkdir tag[2] qid[13] Description mkdir asks the file server to create a directory with given name, mode and gid. The qid for the new directory is returned with the mkdir reply message. Note: 72 is selected as the opcode for TMKDIR from the reserved list. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Implement TMKNODM. Mohan Kumar
Synopsis size[4] Tmknod tag[2] fid[4] name[s] mode[4] major[4] minor[4] gid[4] size[4] Rmknod tag[2] qid[13] Description mknod asks the file server to create a device node with given major and minor number, mode and gid. The qid for the new device node is returned with the mknod reply message. [sripathik@in.ibm.com: Fix error handling code] Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Define and implement TSYMLINK for 9P2000.LVenkateswararao Jujjuri (JV)
Create a symbolic link SYNOPSIS size[4] Tsymlink tag[2] fid[4] name[s] symtgt[s] gid[4] size[4] Rsymlink tag[2] qid[13] DESCRIPTION Create a symbolic link named 'name' pointing to 'symtgt'. gid represents the effective group id of the caller. The permissions of a symbolic link are irrelevant hence it is omitted from the protocol. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Reviewed-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Define and implement TLINK for 9P2000.LVenkateswararao Jujjuri (JV)
This patch adds a helper function to get the dentry from inode and uses it in creating a Hardlink SYNOPSIS size[4] Tlink tag[2] dfid[4] oldfid[4] newpath[s] size[4] Rlink tag[2] DESCRIPTION Create a link 'newpath' in directory pointed by dfid linking to oldfid path. [sripathik@in.ibm.com : p9_client_link should not free req structure if p9_client_rpc has returned an error.] Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: Implement client side of setattr for 9P2000.L protocol.Sripathi Kodi
SYNOPSIS size[4] Tsetattr tag[2] attr[n] size[4] Rsetattr tag[2] DESCRIPTION The setattr command changes some of the file status information. attr resembles the iattr structure used in Linux kernel. It specifies which status parameter is to be changed and to what value. It is laid out as follows: valid[4] specifies which status information is to be changed. Possible values are: ATTR_MODE (1 << 0) ATTR_UID (1 << 1) ATTR_GID (1 << 2) ATTR_SIZE (1 << 3) ATTR_ATIME (1 << 4) ATTR_MTIME (1 << 5) ATTR_ATIME_SET (1 << 7) ATTR_MTIME_SET (1 << 8) The last two bits represent whether the time information is being sent by the client's user space. In the absense of these bits the server always uses server's time. mode[4] File permission bits uid[4] Owner id of file gid[4] Group id of the file size[8] File size atime_sec[8] Time of last file access, seconds atime_nsec[8] Time of last file access, nanoseconds mtime_sec[8] Time of last file modification, seconds mtime_nsec[8] Time of last file modification, nanoseconds Explanation of the patches: -------------------------- *) The kernel just copies relevent contents of iattr structure to p9_iattr_dotl structure and passes it down to the client. The only check it has is calling inode_change_ok() *) The p9_iattr_dotl structure does not have ctime and ia_file parameters because I don't think these are needed in our case. The client user space can request updating just ctime by calling chown(fd, -1, -1). This is handled on server side without a need for putting ctime on the wire. *) The server currently supports changing mode, time, ownership and size of the file. *) 9P RFC says "Either all the changes in wstat request happen, or none of them does: if the request succeeds, all changes were made; if it fails, none were." I have not done anything to implement this specifically because I don't see a reason. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: getattr client implementation for 9P2000.L protocol.Sripathi Kodi
SYNOPSIS size[4] Tgetattr tag[2] fid[4] request_mask[8] size[4] Rgetattr tag[2] lstat[n] DESCRIPTION The getattr transaction inquires about the file identified by fid. request_mask is a bit mask that specifies which fields of the stat structure is the client interested in. The reply will contain a machine-independent directory entry, laid out as follows: st_result_mask[8] Bit mask that indicates which fields in the stat structure have been populated by the server qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file st_mode[4] Permission and flags st_uid[4] User id of owner st_gid[4] Group ID of owner st_nlink[8] Number of hard links st_rdev[8] Device ID (if special file) st_size[8] Size, in bytes st_blksize[8] Block size for file system IO st_blocks[8] Number of file system blocks allocated st_atime_sec[8] Time of last access, seconds st_atime_nsec[8] Time of last access, nanoseconds st_mtime_sec[8] Time of last modification, seconds st_mtime_nsec[8] Time of last modification, nanoseconds st_ctime_sec[8] Time of last status change, seconds st_ctime_nsec[8] Time of last status change, nanoseconds st_btime_sec[8] Time of creation (birth) of file, seconds st_btime_nsec[8] Time of creation (birth) of file, nanoseconds st_gen[8] Inode generation st_data_version[8] Data version number request_mask and result_mask bit masks contain the following bits #define P9_STATS_MODE 0x00000001ULL #define P9_STATS_NLINK 0x00000002ULL #define P9_STATS_UID 0x00000004ULL #define P9_STATS_GID 0x00000008ULL #define P9_STATS_RDEV 0x00000010ULL #define P9_STATS_ATIME 0x00000020ULL #define P9_STATS_MTIME 0x00000040ULL #define P9_STATS_CTIME 0x00000080ULL #define P9_STATS_INO 0x00000100ULL #define P9_STATS_SIZE 0x00000200ULL #define P9_STATS_BLOCKS 0x00000400ULL #define P9_STATS_BTIME 0x00000800ULL #define P9_STATS_GEN 0x00001000ULL #define P9_STATS_DATA_VERSION 0x00002000ULL #define P9_STATS_BASIC 0x000007ffULL #define P9_STATS_ALL 0x00003fffULL This patch implements the client side of getattr implementation for 9P2000.L. It introduces a new structure p9_stat_dotl for getting Linux stat information along with QID. The data layout is similar to stat structure in Linux user space with the following major differences: inode (st_ino) is not part of data. Instead qid is. device (st_dev) is not part of data because this doesn't make sense on the client. All time variables are 64 bit wide on the wire. The kernel seems to use 32 bit variables for these variables. However, some of the architectures have used 64 bit variables and glibc exposes 64 bit variables to user space on some architectures. Hence to be on the safer side we have made these 64 bit in the protocol. Refer to the comments in include/asm-generic/stat.h There are some additional fields: st_btime_sec, st_btime_nsec, st_gen, st_data_version apart from the bitmask, st_result_mask. The bit mask is filled by the server to indicate which stat fields have been populated by the server. Currently there is no clean way for the server to obtain these additional fields, so it sends back just the basic fields. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>
2010-08-02net/9p: Handle the server returned error properlyAneesh Kumar K.V
We need to get the negative errno value in the kernel even for dotl. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: readdir implementation for 9p2000.LSripathi Kodi
This patch implements the kernel part of readdir() implementation for 9p2000.L Change from V3: Instead of inode, server now sends qids for each dirent SYNOPSIS size[4] Treaddir tag[2] fid[4] offset[8] count[4] size[4] Rreaddir tag[2] count[4] data[count] DESCRIPTION The readdir request asks the server to read the directory specified by 'fid' at an offset specified by 'offset' and return as many dirent structures as possible that fit into count bytes. Each dirent structure is laid out as follows. qid.type[1] the type of the file (directory, etc.), represented as a bit vector corresponding to the high 8 bits of the file's mode word. qid.vers[4] version number for given path qid.path[8] the file server's unique identification for the file offset[8] offset into the next dirent. type[1] type of this directory entry. name[256] name of this directory entry. This patch adds v9fs_dir_readdir_dotl() as the readdir() call for 9p2000.L. This function sends P9_TREADDIR command to the server. In response the server sends a buffer filled with dirent structures. This is different from the existing v9fs_dir_readdir() call which receives stat structures from the server. This results in significant speedup of readdir() on large directories. For example, doing 'ls >/dev/null' on a directory with 10000 files on my laptop takes 1.088 seconds with the existing code, but only takes 0.339 seconds with the new readdir. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-029p: strlen() doesn't count the terminatorDan Carpenter
This is an off by one bug because strlen() doesn't count the NULL terminator. We strcpy() addr into a fixed length array of size UNIX_PATH_MAX later on. The addr variable is the name of the device being mounted. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-25kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, ↵Alexey Dobriyan
SHRT_MAX and SHRT_MIN - C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not USHORT_MAX/SHORT_MAX/SHORT_MIN. - Make SHRT_MIN of type s16, not int, for consistency. [akpm@linux-foundation.org: fix drivers/dma/timb_dma.c] [akpm@linux-foundation.org: fix security/keys/keyring.c] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: Optimize TCREATE by eliminating a redundant fid clone. 9p: cleanup: remove unneeded assignment 9p: Add mksock support fs/9p: Make sure we properly instantiate dentry. 9p: add 9P2000.L rename operation 9p: add 9P2000.L statfs operation 9p: VFS switches for 9p2000.L: VFS switches 9p: VFS switches for 9p2000.L: protocol and client changes
2010-05-21Merge branch 'virtio' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits) drivers/char: Eliminate use after free virtio: console: Accept console size along with resize control message virtio: console: Store each console's size in the console structure virtio: console: Resize console port 0 on config intr only if multiport is off virtio: console: Add support for nonblocking write()s virtio: console: Rename wait_is_over() to will_read_block() virtio: console: Don't always create a port 0 if using multiport virtio: console: Use a control message to add ports virtio: console: Move code around for future patches virtio: console: Remove config work handler virtio: console: Don't call hvc_remove() on unplugging console ports virtio: console: Return -EPIPE to hvc_console if we lost the connection virtio: console: Let host know of port or device add failures virtio: console: Add a __send_control_msg() that can send messages without a valid port virtio: Revert "virtio: disable multiport console support." virtio: add_buf_gfp trans_virtio: use virtqueue_xxx wrappers virtio-rng: use virtqueue_xxx wrappers virtio_ring: remove a level of indirection virtio_net: use virtqueue_xxx wrappers ... Fix up conflicts in drivers/net/virtio_net.c due to new virtqueue_xxx wrappers changes conflicting with some other cleanups.
2010-05-219p: add 9P2000.L rename operationSripathi Kodi
I made a V2 of this patch on top of my patches for VFS switches. All the changes were due to change in some offsets. rename - change name of file or directory size[4] Trename tag[2] fid[4] newdirfid[4] name[s] size[4] Rrename tag[2] The rename message is used to change the name of a file, possibly moving it to a new directory. The 9P wstat message can only rename a file within the same directory. Signed-off-by: Jim Garlick <garlick@llnl.gov> Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-219p: add 9P2000.L statfs operationSripathi Kodi
I made a V2 of this patch on top of my patches for VFS switches. The change was adding v9fs_statfs pointer to v9fs_super_ops_dotl instead of v9fs_super_ops. statfs - get file system statistics size[4] Tstatfs tag[2] fid[4] size[4] Rstatfs tag[2] type[4] bsize[4] blocks[8] bfree[8] bavail[8] files[8] ffree[8] fsid[8] namelen[4] The statfs message is used to request file system information returned by the statfs(2) system call, which is used by df(1) to report file system and disk space usage. Signed-off-by: Jim Garlick <garlick@llnl.gov> Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-219p: VFS switches for 9p2000.L: protocol and client changesSripathi Kodi
Prepare p9pdu_read/write functions to handle multiple protocols. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-05-19trans_virtio: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch trans_virtio to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-17net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from net/ (but not any netfilter files) all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: saving negative to unsigned char 9p: return on mutex_lock_interruptible() 9p: Creating files with names too long should fail with ENAMETOOLONG. 9p: Make sure we are able to clunk the cached fid on umount 9p: drop nlink remove fs/9p: Clunk the fid resulting from partial walk of the name 9p: documentation update 9p: Fix setting of protocol flags in v9fs_session_info structure.
2010-04-059p: saving negative to unsigned charDan Carpenter
Saving -EINVAL as unsigned char truncates the high bits and changes it into 234 instead of -22. This breaks the test for "if (ret == -EINVAL)" in parse_opts(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-059p: Make sure we are able to clunk the cached fid on umountAneesh Kumar K.V
dcache prune happen on umount. So we cannot mark the client satus disconnect. That will prevent a 9p call to the server Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-139p: Change the name of new protocol from 9p2010.L to 9p2000.LSripathi Kodi
This patch changes the name of the new 9P protocol from 9p2010.L to 9p2000.u. This is because we learnt that the name 9p2010 is already being used by others. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13net/9p: Add sysfs mount_tag file for virtio 9P deviceAneesh Kumar K.V
This adds a new file for virtio 9P device. The file contain details of the mount device name that should be used to mount the 9P file system. Ex: /sys/devices/virtio-pci/virtio1/mount_tag file now contian the tag name to be used to mount the 9P file system. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13net/9p: Use the tag name in the config space for identifying mount pointAneesh Kumar K.V
This patch use the tag name in the config space to identify the mount device. The the virtio device name depend on the enumeration order of the device and may not remain the same across multiple boots So we use the tag name which is set via qemu option to uniquely identify the mount device Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-059P2010.L handshake: .L protocol negotiationSripathi Kodi
This patch adds 9P2010.L protocol negotiation with the server Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-059P2010.L handshake: Remove "dotu" variableSripathi Kodi
Removes 'dotu' variable and make everything dependent on 'proto_version' field. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-059P2010.L handshake: Add mount optionSripathi Kodi
Add new mount V9FS mount option to specify protocol version This patch adds a new mount option to specify protocol version. With this option it is possible to use "-o version=" switch to specify 9P protocol version to use. Valid options for version are: 9p2000 9p2000.u 9p2010.L Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05net/9p: Handle mount errors correctly.Aneesh Kumar K.V
With this patch we have # mount -t 9p -o trans=virtio virtio2 /mnt/ # mount -t 9p -o trans=virtio virtio2 /mnt/ mount: virtio2 already mounted or /mnt/ busy mount: according to mtab, virtio2 is already mounted on /mnt # mount -t 9p -o trans=virtio virtio3 /mnt/ -o debug=0xfff mount: special device virtio3 does not exist Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05net/9p: Remove MAX_9P_CHAN limitAneesh Kumar K.V
Use a list to track the channel instead of statically allocated array Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-05net/9p: Add multi channel support.Aneesh Kumar K.V
This is needed for supporting multiple mount points. We can find out the device names to be used with mount by checking /sys/devices/virtio-pci/virtio*/device file if the device file have value 9 then the specific virtio device can be used for mounting. ex: #cat /sys/devices/virtio-pci/virtio1/device 9 now we can mount using # mount -t 9p -o trans=virtio virtio1 /mnt/ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-089p: fix p9_client_destroy unconditional calling v9fs_put_transEric Van Hensbergen
restructure client create code to handle error cases better and only cleanup initialized portions of the stack. Signed-off-by: Venkateswararao Jujjuri <jvrao@us.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-089p: Fix the kernel crash on a failed mountAneesh Kumar K.V
The patch fix the crash repoted below [ 15.149907] BUG: unable to handle kernel NULL pointer dereference at 00000001 [ 15.150806] IP: [<c140b886>] p9_virtio_close+0x18/0x24 ..... .... [ 15.150806] Call Trace: [ 15.150806] [<c1408e78>] ? p9_client_destroy+0x3f/0x163 [ 15.150806] [<c1409342>] ? p9_client_create+0x25f/0x270 [ 15.150806] [<c1063b72>] ? trace_hardirqs_on+0xb/0xd [ 15.150806] [<c11ed4e8>] ? match_token+0x64/0x164 [ 15.150806] [<c1175e8d>] ? v9fs_session_init+0x2f1/0x3c8 [ 15.150806] [<c109cfc9>] ? kmem_cache_alloc+0x98/0xb8 [ 15.150806] [<c1063b72>] ? trace_hardirqs_on+0xb/0xd [ 15.150806] [<c1173dd1>] ? v9fs_get_sb+0x47/0x1e8 [ 15.150806] [<c1173dea>] ? v9fs_get_sb+0x60/0x1e8 [ 15.150806] [<c10a2e77>] ? vfs_kern_mount+0x81/0x11a [ 15.150806] [<c10a2f55>] ? do_kern_mount+0x33/0xbe [ 15.150806] [<c10b40b9>] ? do_mount+0x654/0x6b3 [ 15.150806] [<c1038949>] ? do_page_fault+0x0/0x284 [ 15.150806] [<c10b28ec>] ? copy_mount_options+0x73/0xd2 [ 15.150806] [<c10b4179>] ? sys_mount+0x61/0x94 [ 15.150806] [<c14284e9>] ? syscall_call+0x7/0xb .... [ 15.203562] ---[ end trace 1dd159357709eb4b ]--- [ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-089p: fix option parsingEric Van Hensbergen
Options pointer is being moved before calling kfree() which seems to cause problems. This uses a separate pointer to track and free original allocation. Signed-off-by: Venkateswararao Jujjuri <jvrao@us.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>w
2010-02-08net/9p: fix statsize inside twstatEric Van Hensbergen
stat structures contain a size prefix. In our twstat messages we were including the size of the size prefix in the prefix, which is not what the protocol wants, and Inferno servers would complain. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-08net/9p: fail when user specifies a transport which we can't findEric Van Hensbergen
If the user specifies a transport and we can't find it, we failed back to the default trainsport silently. This patch will make the code complain more loudly and return an error code. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-02-08net/9p: fix virtio transport to correctly update status on connectEric Van Hensbergen
The 9p virtio transport was not updating its connection status correctly preventing it from being able to mount the server. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>