summaryrefslogtreecommitdiff
path: root/net/8021q
AgeCommit message (Collapse)Author
2017-10-04net: 8021q: skip packets if the vlan is downVishakha Narvekar
If the vlan is down, free the packet instead of proceeding with other processing, or counting it as received. If vlan interfaces are used as slaves for bonding, with arp monitoring for connectivity, if the rx counter is seen to be incrementing, then the bond device will not observe that the interface is down. CC: David S. Miller <davem@davemloft.net> Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.changelinkMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19net: 8021q: Fix one possible panic caused by BUG_ON in free_netdevGao Feng
The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08net: Remove support for bridge bypass ndos from stacked devicesArkadi Sharshevsky
Remove support for bridge bypass ndos from stacked devices. At this point no driver which supports stack device behavior offload supports operation with SELF flag. The case for upper device is already taken care of in both of the following cases: 1. FDB add/del - driver should check at the notification cb if the stacked device contains his ports. 2. Port attribute - calls switchdev code directly which checks for case of stack device. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08vlan: Keep NETIF_F_HW_CSUM similar to other software devicesVlad Yasevich
Vlan devices, like all other software devices, enable NETIF_F_HW_CSUM feature. However, unlike all the othe other software devices, vlans will switch to using IP|IPV6_CSUM features, if the underlying devices uses them. In these situations, checksum offload features on the vlan device can't be controlled via ethtool. This patch makes vlans keep HW_CSUM feature if the underlying device supports checksum offloading. This makes vlan devices behave like other software devices, and restores control to the user. A side-effect is that some offload settings (typically UFO) may be enabled on the vlan device while being disabled on the HW. However, the GSO code will correctly process the packets. This actually results in slightly better raw throughput. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net/8021q: create device with all possible features in wanted_featuresAndrey Vagin
wanted_features is a set of features which have to be enabled if a hardware allows that. Currently when a vlan device is created, its wanted_features is set to current features of its base device. The problem is that the base device can get new features and they are not propagated to vlan-s of this device. If we look at bonding devices, they doesn't have this problem and this patch suggests to fix this issue by the same way how it works for bonding devices. We meet this problem, when we try to create a vlan device over a bonding device. When a system are booting, real devices require time to be initialized, so bonding devices created without slaves, then vlan devices are created and only then ethernet devices are added to the bonding device. As a result we have vlan devices with disabled scatter-gather. * create a bonding device $ ip link add bond0 type bond $ ethtool -k bond0 | grep scatter scatter-gather: off tx-scatter-gather: off [requested on] tx-scatter-gather-fraglist: off [requested on] * create a vlan device $ ip link add link bond0 name bond0.10 type vlan id 10 $ ethtool -k bond0.10 | grep scatter scatter-gather: off tx-scatter-gather: off tx-scatter-gather-fraglist: off * Add a slave device to bond0 $ ip link set dev eth0 master bond0 And now we can see that the bond0 device has got the scatter-gather feature, but the bond0.10 hasn't got it. [root@laptop linux-task-diag]# ethtool -k bond0 | grep scatter scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: on [root@laptop linux-task-diag]# ethtool -k bond0.10 | grep scatter scatter-gather: off tx-scatter-gather: off tx-scatter-gather-fraglist: off With this patch the vlan device will get all new features from the bonding device. Here is a call trace how features which are set in this patch reach dev->wanted_features. register_netdevice vlan_dev_init ... dev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_GSO_SOFTWARE | NETIF_F_HIGHDMA | NETIF_F_SCTP_CRC | NETIF_F_ALL_FCOE; dev->features |= dev->hw_features; ... dev->wanted_features = dev->features & dev->hw_features; __netdev_update_features(dev); vlan_dev_fix_features ... Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Patrick McHardy <kaber@trash.net> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: remove ndo_neigh_{construct, destroy} from stacked devicesIdo Schimmel
In commit 18bfb924f000 ("net: introduce default neigh_construct/destroy ndo calls for L2 upper devices") we added these ndos to stacked devices such as team and bond, so that calls will be propagated to mlxsw. However, previous commit removed the reliance on these ndos and no new users of these ndos have appeared since above mentioned commit. We can therefore safely remove this dead code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-18netns: make struct pernet_operations::id unsigned intAlexey Dobriyan
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in core net infraJarod Wilson
geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: add recursion limit to GROSabrina Dubroca
Currently, GRO can do unlimited recursion through the gro_receive handlers. This was fixed for tunneling protocols by limiting tunnel GRO to one level with encap_mark, but both VLAN and TEB still have this problem. Thus, the kernel is vulnerable to a stack overflow, if we receive a packet composed entirely of VLAN headers. This patch adds a recursion counter to the GRO layer to prevent stack overflow. When a gro_receive function hits the recursion limit, GRO is aborted for this skb and it is processed normally. This recursion counter is put in the GRO CB, but could be turned into a percpu counter if we run out of space in the CB. Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report. Fixes: CVE-2016-7039 Fixes: 9b174d88c257 ("net: Add Transparent Ethernet Bridging GRO support.") Fixes: 66e5133f19e9 ("vlan: Add GRO support for non hardware accelerated vlan") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: vlan: Use sizeof instead of literal numberGao Feng
Use sizeof variable instead of literal number to enhance the readability. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18vlan: Remove unnecessary comparison of unsigned against 0Tobias Klauser
args.u.name_type is of type unsigned int and is always >= 0. This fixes the following GCC warning: net/8021q/vlan.c: In function ‘vlan_ioctl_handler’: net/8021q/vlan.c:574:14: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: remove type_check from dev_get_nest_level()Sabrina Dubroca
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-16vlan: use a valid default mtu value for vlan over macsecPaolo Abeni
macsec can't cope with mtu frames which need vlan tag insertion, and vlan device set the default mtu equal to the underlying dev's one. By default vlan over macsec devices use invalid mtu, dropping all the large packets. This patch adds a netif helper to check if an upper vlan device needs mtu reduction. The helper is used during vlan devices initialization to set a valid default and during mtu updating to forbid invalid, too bit, mtu values. The helper currently only check if the lower dev is a macsec device, if we get more users, we need to update only the helper (possibly reserving an additional IFF bit). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: introduce default neigh_construct/destroy ndo calls for L2 upper devicesJiri Pirko
L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31vlan: Propagate MAC address to VLANsMike Manning
The MAC address of the physical interface is only copied to the VLAN when it is first created, resulting in an inconsistency after MAC address changes of only newly created VLANs having an up-to-date MAC. The VLANs should continue inheriting the MAC address of the physical interface until the VLAN MAC address is explicitly set to any value. This allows IPv6 EUI64 addresses for the VLAN to reflect any changes to the MAC of the physical interface and thus for DAD to behave as expected. Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17vlan: propagate gso_max_segsEric Dumazet
vlan drivers lack proper propagation of gso_max_segs from lower device. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25net: 8021q: use __ethtool_get_ksettingsDavid Decotigny
Signed-off-by: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21vlan: turn on unicast filtering on vlan deviceZhang Shengju
Currently vlan device inherits unicast filtering flag from underlying device. If underlying device doesn't support unicast filter, this will put vlan device into promiscuous mode when it's stacked. Tun on IFF_UNICAST_FLT on the vlan device in any case so that it does not go into promiscuous mode needlessly. If underlying device does not support unicast filtering, that device will enter promiscuous mode. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17vlan: change return type of vlan_proc_rem_devZhang Shengju
Since function vlan_proc_rem_dev() will only return 0, it's better to return void instead of int. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15net: Rename NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASKTom Herbert
The name NETIF_F_ALL_CSUM is a misnomer. This does not correspond to the set of features for offloading all checksums. This is a mask of the checksum offload related features bits. It is incorrect to set both NETIF_F_HW_CSUM and NETIF_F_IP_CSUM or NETIF_F_IPV6 at the same time for features of a device. This patch: - Changes instances of NETIF_F_ALL_CSUM to NETIF_F_CSUM_MASK (where NETIF_F_ALL_CSUM is being used as a mask). - Changes bonding, sfc/efx, ipvlan, macvlan, vlan, and team drivers to use NEITF_F_HW_CSUM in features list instead of NETIF_F_ALL_CSUM. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15sctp: Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRCTom Herbert
The SCTP checksum is really a CRC and is very different from the standards 1's complement checksum that serves as the checksum for IP protocols. This offload interface is also very different. Rename NETIF_F_SCTP_CSUM to NETIF_F_SCTP_CRC to highlight these differences. The term CSUM should be reserved in the stack to refer to the standard 1's complement IP checksum. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15switchdev: vlan: Use switchdev_port* in vlan_netdev_opsIdo Schimmel
We need to be able to propagate static FDB entries and certain bridge port attributes (e.g. learning, flooding) down to the port netdev driver when bridge port is a VLAN interface. Achieve that by setting ndo_bridge* and ndo_fdb* in vlan_netdev_ops to the corresponding switchdev_port* functions. This is consistent with team and bond devices. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-17vlan: Do not put vlan headers back on bridge and macvlan portsVlad Yasevich
When a vlan is configured with REORDER_HEADER set to 0, the vlan header is put back into the packet and makes it appear that the vlan header is still there even after it's been processed. This posses a problem for bridge and macvlan ports. The packets passed to those device may be forwarded and at the time of the forward, vlan headers end up being unexpectedly present. With the patch, we make sure that we do not put the vlan header back (when REORDER_HEADER is 0) if a bridge or macvlan has been configured on top of the vlan device. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03vlan: Invoke driver vlan hooks only if device is presentPadmanabh Ratnakar
NIC drivers mark device as detached during error recovery. It expects no manangement hooks to be invoked in this state. Invoke driver vlan hooks only if device is present. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: 8021q: convert to using IFF_NO_QUEUEPhil Sutter
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01vlan: Add GRO support for non hardware accelerated vlanToshiaki Makita
Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. Test Environment: vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599) Result: - Before $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 5233.17 Rx side CPU usage: %usr %sys %irq %soft %idle 0.27 58.03 0.00 41.70 0.00 - After $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 7586.85 Rx side CPU usage: %usr %sys %irq %soft %idle 0.50 25.83 0.00 59.53 14.14 [ Register VLAN offloads with priority 10 -DaveM ] Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14vlan: Correctly propagate promisc|allmulti flags in notifier.Vlad Yasevich
Currently vlan notifier handler will try to update all vlans for a device when that device comes up. A problem occurs, however, when the vlan device was set to promiscuous, but not by the user (ex: a bridge). In that case, dev->gflags are not updated. What results is that the lower device ends up with an extra promiscuity count. Here are the backtraces that prove this: [62852.052179] [<ffffffff814fe248>] __dev_set_promiscuity+0x38/0x1e0 [62852.052186] [<ffffffff8160bcbb>] ? _raw_spin_unlock_bh+0x1b/0x40 [62852.052188] [<ffffffff814fe4be>] ? dev_set_rx_mode+0x2e/0x40 [62852.052190] [<ffffffff814fe694>] dev_set_promiscuity+0x24/0x50 [62852.052194] [<ffffffffa0324795>] vlan_dev_open+0xd5/0x1f0 [8021q] [62852.052196] [<ffffffff814fe58f>] __dev_open+0xbf/0x140 [62852.052198] [<ffffffff814fe88d>] __dev_change_flags+0x9d/0x170 [62852.052200] [<ffffffff814fe989>] dev_change_flags+0x29/0x60 The above comes from the setting the vlan device to IFF_UP state. [62852.053569] [<ffffffff814fe248>] __dev_set_promiscuity+0x38/0x1e0 [62852.053571] [<ffffffffa032459b>] ? vlan_dev_set_rx_mode+0x2b/0x30 [8021q] [62852.053573] [<ffffffff814fe8d5>] __dev_change_flags+0xe5/0x170 [62852.053645] [<ffffffff814fe989>] dev_change_flags+0x29/0x60 [62852.053647] [<ffffffffa032334a>] vlan_device_event+0x18a/0x690 [8021q] [62852.053649] [<ffffffff8161036c>] notifier_call_chain+0x4c/0x70 [62852.053651] [<ffffffff8109d456>] raw_notifier_call_chain+0x16/0x20 [62852.053653] [<ffffffff814f744d>] call_netdevice_notifiers+0x2d/0x60 [62852.053654] [<ffffffff814fe1a3>] __dev_notify_flags+0x33/0xa0 [62852.053656] [<ffffffff814fe9b2>] dev_change_flags+0x52/0x60 [62852.053657] [<ffffffff8150cd57>] do_setlink+0x397/0xa40 And this one comes from the notification code. What we end up with is a vlan with promiscuity count of 1 and and a physical device with a promiscuity count of 2. They should both have a count 1. To resolve this issue, vlan code can use dev_get_flags() api which correctly masks promiscuity and allmulti flags. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02vlan: implement ndo_get_iflinkNicolas Dichtel
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29vlan: Add features for stacked vlan deviceToshiaki Makita
Stacked vlan devices curretly have few features (GRO, HIGHDMA, LLTX). Since we have software fallbacks in case the NIC can not handle some features for multiple vlans, we can add the same features as the lower vlan devices for stacked vlan devices. This allows stacked vlan devices to create large (GSO) packets and not to segment packets. Those packets will be segmented by software on the real device, or even can be segmented by the NIC once TSO for multiple vlans becomes enabled by the following patches. The exception is those related to FCoE, which does not have a software fallback. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18net: Fix high overhead of vlan sub-device teardown.David S. Miller
When a networking device is taken down that has a non-trivial number of VLAN devices configured under it, we eat a full synchronize_net() for every such VLAN device. This is because of the call chain: NETDEV_DOWN notifier --> vlan_device_event() --> dev_change_flags() --> __dev_change_flags() --> __dev_close() --> __dev_close_many() --> dev_deactivate_many() --> synchronize_net() This is kind of rediculous because we already have infrastructure for batching doing operation X to a list of net devices so that we only incur one sync. So make use of that by exporting dev_close_many() and adjusting it's interfaace so that the caller can fully manage the batch list. Use this in vlan_device_event() and all the overhead goes away. Reported-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-038021q: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Kill dev_rebuild_headerEric W. Biederman
Now that there are no more users kill dev_rebuild_header and all of it's implementations. This is long overdue. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23vlan: advertise link netns via netlinkNicolas Dichtel
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12vlan: Add ability to always enable TSO/UFOToshiaki Makita
Since the real device can segment packets by software, a vlan device can set TSO/UFO even when the real device doesn't have those features. Unlike GSO, this allows packets to be segmented after Qdisc. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: Pass ethtool get_ts_info queries to real device.Richard Cochran
Commit a6111d3c "vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device" intended to enable hardware time stamping on VLAN interfaces, but passing SIOCSHWTSTAMP is only half of the story. This patch adds the second half, by letting user space find out the time stamping capabilities of the device backing a VLAN interface. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: make __vlan_hwaccel_put_tag return voidJiri Pirko
Always returns the same skb it gets, so change to void. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 18:23:05 +0000