| Age | Commit message (Collapse) | Author |
|---|
|
Andres observed that his database workload is struggling with the
transaction journal creating pressure on frequently read pages.
Access patterns like transaction journals frequently write the same
pages over and over, but in the majority of cases those pages are never
read back. There are no caching benefits to be had for those pages, so
activating them and having them put pressure on pages that do benefit
from caching is a bad choice.
Leave page activations to read accesses and don't promote pages based on
writes alone.
It could be said that partially written pages do contain cache-worthy
data, because even if *userspace* does not access the unwritten part,
the kernel still has to read it from the filesystem for correctness.
However, a counter argument is that these pages enjoy at least *some*
protection over other inactive file pages through the writeback cache,
in the sense that dirty pages are written back with a delay and cache
reclaim leaves them alone until they have been written back to disk.
Should that turn out to be insufficient and we see increased read IO
from partial writes under memory pressure, we can always go back and
update grab_cache_page_write_begin() to take (pos, len) so that it can
tell partial writes from pages that don't need partial reads. But for
now, keep it simple.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a follow-up to
http://www.spinics.net/lists/linux-mm/msg101739.html
where Andres reported his database workingset being pushed out by the
minimum size enforcement of the inactive file list - currently 50% of
cache - as well as repeatedly written file pages that are never actually
read.
Two changes fell out of the discussions. The first change observes that
pages that are only ever written don't benefit from caching beyond what
the writeback cache does for partial page writes, and so we shouldn't
promote them to the active file list where they compete with pages whose
cached data is actually accessed repeatedly. This change comes in two
patches - one for in-cache write accesses and one for refaults triggered
by writes, neither of which should promote a cache page.
Second, with the refault detection we don't need to set 50% of the cache
aside for used-once cache anymore since we can detect frequently used
pages even when they are evicted between accesses. We can allow the
active list to be bigger and thus protect a bigger workingset that isn't
challenged by streamers. Depending on the access patterns, this can
increase major faults during workingset transitions for better
performance during stable phases.
This patch (of 3):
When rewriting a page, the data in that page is replaced with new data.
This means that evicting something else from the active file list, in
order to cache data that will be replaced by something else, is likely
to be a waste of memory.
It is better to save the active list for frequently read pages, because
reads actually use the data that is in the page.
This patch ignores partial writes, because it is unclear whether the
complexity of identifying those is worth any potential performance gain
obtained from better caching pages that see repeated partial writes at
large enough intervals to not get caught by the use-twice promotion code
used for the inactive file list.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator fast path uses either the requested nodemask or
cpuset_current_mems_allowed if cpusets are enabled. If the allocation
context allows watermarks to be ignored then it can also ignore memory
policies. However, on entering the allocator slowpath the nodemask may
still be cpuset_current_mems_allowed and the policies are enforced.
This patch resets the nodemask appropriately before entering the
slowpath.
Link: http://lkml.kernel.org/r/20160504143628.GU2858@techsingularity.net
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Bad pages should be rare so the code handling them doesn't need to be
inline for performance reasons. Put it to separate function which
returns void. This also assumes that the initial page_expected_state()
result will match the result of the thorough check, i.e. the page
doesn't become "good" in the meanwhile. This matches the same
expectations already in place in free_pages_check().
!DEBUG_VM bloat-o-meter:
add/remove: 1/0 grow/shrink: 0/1 up/down: 134/-274 (-140)
function old new delta
check_new_page_bad - 134 +134
get_page_from_freelist 3468 3194 -274
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The new free_pcp_prepare() function shares a lot of code with
free_pages_prepare(), which makes this a maintenance risk when some
future patch modifies only one of them. We should be able to achieve
the same effect (skipping free_pages_check() from !DEBUG_VM configs) by
adding a parameter to free_pages_prepare() and making it inline, so the
checks (and the order != 0 parts) are eliminated from the call from
free_pcp_prepare().
!DEBUG_VM: bloat-o-meter reports no difference, as my gcc was already
inlining free_pages_prepare() and the elimination seems to work as
expected
DEBUG_VM bloat-o-meter:
add/remove: 0/1 grow/shrink: 2/0 up/down: 1035/-778 (257)
function old new delta
__free_pages_ok 297 1060 +763
free_hot_cold_page 480 752 +272
free_pages_prepare 778 - -778
Here inlining didn't occur before, and added some code, but it's ok for
a debug option.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page allocated checks a number of page fields for validity. This
catches corruption bugs of pages that are already freed but it is
expensive. This patch weakens the debugging check by checking PCP pages
only when the PCP lists are being refilled. All compound pages are
checked. This potentially avoids debugging checks entirely if the PCP
lists are never emptied and refilled so some corruption issues may be
missed. Full checking requires DEBUG_VM.
With the two deferred debugging patches applied, the impact to a page
allocator microbenchmark is
4.6.0-rc3 4.6.0-rc3
inline-v3r6 deferalloc-v3r7
Min alloc-odr0-1 344.00 ( 0.00%) 317.00 ( 7.85%)
Min alloc-odr0-2 248.00 ( 0.00%) 231.00 ( 6.85%)
Min alloc-odr0-4 209.00 ( 0.00%) 192.00 ( 8.13%)
Min alloc-odr0-8 181.00 ( 0.00%) 166.00 ( 8.29%)
Min alloc-odr0-16 168.00 ( 0.00%) 154.00 ( 8.33%)
Min alloc-odr0-32 161.00 ( 0.00%) 148.00 ( 8.07%)
Min alloc-odr0-64 158.00 ( 0.00%) 145.00 ( 8.23%)
Min alloc-odr0-128 156.00 ( 0.00%) 143.00 ( 8.33%)
Min alloc-odr0-256 168.00 ( 0.00%) 154.00 ( 8.33%)
Min alloc-odr0-512 178.00 ( 0.00%) 167.00 ( 6.18%)
Min alloc-odr0-1024 186.00 ( 0.00%) 174.00 ( 6.45%)
Min alloc-odr0-2048 192.00 ( 0.00%) 180.00 ( 6.25%)
Min alloc-odr0-4096 198.00 ( 0.00%) 184.00 ( 7.07%)
Min alloc-odr0-8192 200.00 ( 0.00%) 188.00 ( 6.00%)
Min alloc-odr0-16384 201.00 ( 0.00%) 188.00 ( 6.47%)
Min free-odr0-1 189.00 ( 0.00%) 180.00 ( 4.76%)
Min free-odr0-2 132.00 ( 0.00%) 126.00 ( 4.55%)
Min free-odr0-4 104.00 ( 0.00%) 99.00 ( 4.81%)
Min free-odr0-8 90.00 ( 0.00%) 85.00 ( 5.56%)
Min free-odr0-16 84.00 ( 0.00%) 80.00 ( 4.76%)
Min free-odr0-32 80.00 ( 0.00%) 76.00 ( 5.00%)
Min free-odr0-64 78.00 ( 0.00%) 74.00 ( 5.13%)
Min free-odr0-128 77.00 ( 0.00%) 73.00 ( 5.19%)
Min free-odr0-256 94.00 ( 0.00%) 91.00 ( 3.19%)
Min free-odr0-512 108.00 ( 0.00%) 112.00 ( -3.70%)
Min free-odr0-1024 115.00 ( 0.00%) 118.00 ( -2.61%)
Min free-odr0-2048 120.00 ( 0.00%) 125.00 ( -4.17%)
Min free-odr0-4096 123.00 ( 0.00%) 129.00 ( -4.88%)
Min free-odr0-8192 126.00 ( 0.00%) 130.00 ( -3.17%)
Min free-odr0-16384 126.00 ( 0.00%) 131.00 ( -3.97%)
Note that the free paths for large numbers of pages is impacted as the
debugging cost gets shifted into that path when the page data is no
longer necessarily cache-hot.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page free checks a number of page fields for validity. This
catches premature frees and corruptions but it is also expensive. This
patch weakens the debugging check by checking PCP pages at the time they
are drained from the PCP list. This will trigger the bug but the site
that freed the corrupt page will be lost. To get the full context, a
kernel rebuild with DEBUG_VM is necessary.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An important function for cpusets is cpuset_node_allowed(), which
optimizes on the fact if there's a single root CPU set, it must be
trivially allowed. But the check "nr_cpusets() <= 1" doesn't use the
cpusets_enabled_key static key the right way where static keys eliminate
branching overhead with jump labels.
This patch converts it so that static key is used properly. It's also
switched to the new static key API and the checking functions are
converted to return bool instead of int. We also provide a new variant
__cpuset_zone_allowed() which expects that the static key check was
already done and they key was enabled. This is needed for
get_page_from_freelist() where we want to also avoid the relatively
slower check when ALLOC_CPUSET is not set in alloc_flags.
The impact on the page allocator microbenchmark is less than expected
but the cleanup in itself is worthwhile.
4.6.0-rc2 4.6.0-rc2
multcheck-v1r20 cpuset-v1r20
Min alloc-odr0-1 348.00 ( 0.00%) 348.00 ( 0.00%)
Min alloc-odr0-2 254.00 ( 0.00%) 254.00 ( 0.00%)
Min alloc-odr0-4 213.00 ( 0.00%) 213.00 ( 0.00%)
Min alloc-odr0-8 186.00 ( 0.00%) 183.00 ( 1.61%)
Min alloc-odr0-16 173.00 ( 0.00%) 171.00 ( 1.16%)
Min alloc-odr0-32 166.00 ( 0.00%) 163.00 ( 1.81%)
Min alloc-odr0-64 162.00 ( 0.00%) 159.00 ( 1.85%)
Min alloc-odr0-128 160.00 ( 0.00%) 157.00 ( 1.88%)
Min alloc-odr0-256 169.00 ( 0.00%) 166.00 ( 1.78%)
Min alloc-odr0-512 180.00 ( 0.00%) 180.00 ( 0.00%)
Min alloc-odr0-1024 188.00 ( 0.00%) 187.00 ( 0.53%)
Min alloc-odr0-2048 194.00 ( 0.00%) 193.00 ( 0.52%)
Min alloc-odr0-4096 199.00 ( 0.00%) 198.00 ( 0.50%)
Min alloc-odr0-8192 202.00 ( 0.00%) 201.00 ( 0.50%)
Min alloc-odr0-16384 203.00 ( 0.00%) 202.00 ( 0.49%)
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function call overhead of get_pfnblock_flags_mask() is measurable in
the page free paths. This patch uses an inlined version that is faster.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The original count is never reused so it can be removed.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check without side-effects should be easier to maintain. It also
removes the duplicated cpupid and flags reset done in !DEBUG_VM variant
of both free_pcp_prepare() and then bulkfree_pcp_prepare(). Finally, it
enables the next patch.
It shouldn't result in new branches, thanks to inlining of the check.
!DEBUG_VM bloat-o-meter:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-27 (-27)
function old new delta
__free_pages_ok 748 739 -9
free_pcppages_bulk 1403 1385 -18
DEBUG_VM:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-28 (-28)
function old new delta
free_pages_prepare 806 778 -28
This is also slightly faster because cpupid information is not set on
tail pages so we can avoid resets there.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
From: Vlastimil Babka <vbabka@suse.cz>
!DEBUG_VM size and bloat-o-meter:
add/remove: 1/0 grow/shrink: 0/2 up/down: 124/-370 (-246)
function old new delta
free_pages_check_bad - 124 +124
free_pcppages_bulk 1288 1171 -117
__free_pages_ok 948 695 -253
DEBUG_VM:
add/remove: 1/0 grow/shrink: 0/1 up/down: 124/-214 (-90)
function old new delta
free_pages_check_bad - 124 +124
free_pages_prepare 1112 898 -214
[akpm@linux-foundation.org: fix whitespace]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every page allocated or freed is checked for sanity to avoid corruptions
that are difficult to detect later. A bad page could be due to a number
of fields. Instead of using multiple branches, this patch combines
multiple fields into a single branch. A detailed check is only
necessary if that check fails.
4.6.0-rc2 4.6.0-rc2
initonce-v1r20 multcheck-v1r20
Min alloc-odr0-1 359.00 ( 0.00%) 348.00 ( 3.06%)
Min alloc-odr0-2 260.00 ( 0.00%) 254.00 ( 2.31%)
Min alloc-odr0-4 214.00 ( 0.00%) 213.00 ( 0.47%)
Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%)
Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%)
Min alloc-odr0-32 165.00 ( 0.00%) 166.00 ( -0.61%)
Min alloc-odr0-64 162.00 ( 0.00%) 162.00 ( 0.00%)
Min alloc-odr0-128 161.00 ( 0.00%) 160.00 ( 0.62%)
Min alloc-odr0-256 170.00 ( 0.00%) 169.00 ( 0.59%)
Min alloc-odr0-512 181.00 ( 0.00%) 180.00 ( 0.55%)
Min alloc-odr0-1024 190.00 ( 0.00%) 188.00 ( 1.05%)
Min alloc-odr0-2048 196.00 ( 0.00%) 194.00 ( 1.02%)
Min alloc-odr0-4096 202.00 ( 0.00%) 199.00 ( 1.49%)
Min alloc-odr0-8192 205.00 ( 0.00%) 202.00 ( 1.46%)
Min alloc-odr0-16384 205.00 ( 0.00%) 203.00 ( 0.98%)
Again, the benefit is marginal but avoiding excessive branches is
important. Ideally the paths would not have to check these conditions
at all but regrettably abandoning the tests would make use-after-free
bugs much harder to detect.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The classzone_idx can be inferred from preferred_zoneref so remove the
unnecessary field and save stack space.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The allocator fast path looks up the first usable zone in a zonelist and
then get_page_from_freelist does the same job in the zonelist iterator.
This patch preserves the necessary information.
4.6.0-rc2 4.6.0-rc2
fastmark-v1r20 initonce-v1r20
Min alloc-odr0-1 364.00 ( 0.00%) 359.00 ( 1.37%)
Min alloc-odr0-2 262.00 ( 0.00%) 260.00 ( 0.76%)
Min alloc-odr0-4 214.00 ( 0.00%) 214.00 ( 0.00%)
Min alloc-odr0-8 186.00 ( 0.00%) 186.00 ( 0.00%)
Min alloc-odr0-16 173.00 ( 0.00%) 173.00 ( 0.00%)
Min alloc-odr0-32 165.00 ( 0.00%) 165.00 ( 0.00%)
Min alloc-odr0-64 161.00 ( 0.00%) 162.00 ( -0.62%)
Min alloc-odr0-128 159.00 ( 0.00%) 161.00 ( -1.26%)
Min alloc-odr0-256 168.00 ( 0.00%) 170.00 ( -1.19%)
Min alloc-odr0-512 180.00 ( 0.00%) 181.00 ( -0.56%)
Min alloc-odr0-1024 190.00 ( 0.00%) 190.00 ( 0.00%)
Min alloc-odr0-2048 196.00 ( 0.00%) 196.00 ( 0.00%)
Min alloc-odr0-4096 202.00 ( 0.00%) 202.00 ( 0.00%)
Min alloc-odr0-8192 206.00 ( 0.00%) 205.00 ( 0.49%)
Min alloc-odr0-16384 206.00 ( 0.00%) 205.00 ( 0.49%)
The benefit is negligible and the results are within the noise but each
cycle counts.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Watermarks have to be checked on every allocation including the number
of pages being allocated and whether reserves can be accessed. The
reserves only matter if memory is limited and the free_pages adjustment
only applies to high-order pages. This patch adds a shortcut for
order-0 pages that avoids numerous calculations if there is plenty of
free memory yielding the following performance difference in a page
allocator microbenchmark;
4.6.0-rc2 4.6.0-rc2
optfair-v1r20 fastmark-v1r20
Min alloc-odr0-1 380.00 ( 0.00%) 364.00 ( 4.21%)
Min alloc-odr0-2 273.00 ( 0.00%) 262.00 ( 4.03%)
Min alloc-odr0-4 227.00 ( 0.00%) 214.00 ( 5.73%)
Min alloc-odr0-8 196.00 ( 0.00%) 186.00 ( 5.10%)
Min alloc-odr0-16 183.00 ( 0.00%) 173.00 ( 5.46%)
Min alloc-odr0-32 173.00 ( 0.00%) 165.00 ( 4.62%)
Min alloc-odr0-64 169.00 ( 0.00%) 161.00 ( 4.73%)
Min alloc-odr0-128 169.00 ( 0.00%) 159.00 ( 5.92%)
Min alloc-odr0-256 180.00 ( 0.00%) 168.00 ( 6.67%)
Min alloc-odr0-512 190.00 ( 0.00%) 180.00 ( 5.26%)
Min alloc-odr0-1024 198.00 ( 0.00%) 190.00 ( 4.04%)
Min alloc-odr0-2048 204.00 ( 0.00%) 196.00 ( 3.92%)
Min alloc-odr0-4096 209.00 ( 0.00%) 202.00 ( 3.35%)
Min alloc-odr0-8192 213.00 ( 0.00%) 206.00 ( 3.29%)
Min alloc-odr0-16384 214.00 ( 0.00%) 206.00 ( 3.74%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The fair zone allocation policy is not without cost but it can be
reduced slightly. This patch removes an unnecessary local variable,
checks the likely conditions of the fair zone policy first, uses a bool
instead of a flags check and falls through when a remote node is
encountered instead of doing a full restart. The benefit is marginal
but it's there
4.6.0-rc2 4.6.0-rc2
decstat-v1r20 optfair-v1r20
Min alloc-odr0-1 377.00 ( 0.00%) 380.00 ( -0.80%)
Min alloc-odr0-2 273.00 ( 0.00%) 273.00 ( 0.00%)
Min alloc-odr0-4 226.00 ( 0.00%) 227.00 ( -0.44%)
Min alloc-odr0-8 196.00 ( 0.00%) 196.00 ( 0.00%)
Min alloc-odr0-16 183.00 ( 0.00%) 183.00 ( 0.00%)
Min alloc-odr0-32 175.00 ( 0.00%) 173.00 ( 1.14%)
Min alloc-odr0-64 172.00 ( 0.00%) 169.00 ( 1.74%)
Min alloc-odr0-128 170.00 ( 0.00%) 169.00 ( 0.59%)
Min alloc-odr0-256 183.00 ( 0.00%) 180.00 ( 1.64%)
Min alloc-odr0-512 191.00 ( 0.00%) 190.00 ( 0.52%)
Min alloc-odr0-1024 199.00 ( 0.00%) 198.00 ( 0.50%)
Min alloc-odr0-2048 204.00 ( 0.00%) 204.00 ( 0.00%)
Min alloc-odr0-4096 210.00 ( 0.00%) 209.00 ( 0.48%)
Min alloc-odr0-8192 213.00 ( 0.00%) 213.00 ( 0.00%)
Min alloc-odr0-16384 214.00 ( 0.00%) 214.00 ( 0.00%)
The benefit is marginal at best but one of the most important benefits,
avoiding a second search when falling back to another node is not
triggered by this particular test so the benefit for some corner cases
is understated.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator fast path checks page multiple times unnecessarily.
This patch avoids all the slowpath checks if the first allocation
attempt succeeds.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When bulk freeing pages from the per-cpu lists the zone is checked for
isolated pageblocks on every release. This patch checks it once per
drain.
[mgorman@techsingularity.net: fix locking radce, per Vlastimil]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__GFP_HARDWALL only has meaning in the context of cpusets but the fast
path always applies the flag on the first attempt. Move the
manipulations into the cpuset paths where they will be masked by a
static branch in the common case.
With the other micro-optimisations in this series combined, the impact
on a page allocator microbenchmark is
4.6.0-rc2 4.6.0-rc2
decstat-v1r20 micro-v1r20
Min alloc-odr0-1 381.00 ( 0.00%) 377.00 ( 1.05%)
Min alloc-odr0-2 275.00 ( 0.00%) 273.00 ( 0.73%)
Min alloc-odr0-4 229.00 ( 0.00%) 226.00 ( 1.31%)
Min alloc-odr0-8 199.00 ( 0.00%) 196.00 ( 1.51%)
Min alloc-odr0-16 186.00 ( 0.00%) 183.00 ( 1.61%)
Min alloc-odr0-32 179.00 ( 0.00%) 175.00 ( 2.23%)
Min alloc-odr0-64 174.00 ( 0.00%) 172.00 ( 1.15%)
Min alloc-odr0-128 172.00 ( 0.00%) 170.00 ( 1.16%)
Min alloc-odr0-256 181.00 ( 0.00%) 183.00 ( -1.10%)
Min alloc-odr0-512 193.00 ( 0.00%) 191.00 ( 1.04%)
Min alloc-odr0-1024 201.00 ( 0.00%) 199.00 ( 1.00%)
Min alloc-odr0-2048 206.00 ( 0.00%) 204.00 ( 0.97%)
Min alloc-odr0-4096 212.00 ( 0.00%) 210.00 ( 0.94%)
Min alloc-odr0-8192 215.00 ( 0.00%) 213.00 ( 0.93%)
Min alloc-odr0-16384 216.00 ( 0.00%) 214.00 ( 0.93%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page is guaranteed to be set before it is read with or without the
initialisation.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zonelist here is a copy of a struct field that is used once. Ditch it.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The number of zones skipped to a zone expiring its fair zone allocation
quota is irrelevant. Convert to bool.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alloc_flags is a bitmask of flags but it is signed which does not
necessarily generate the best code depending on the compiler. Even
without an impact, it makes more sense that this be unsigned.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pageblocks have an associated bitmap to store migrate types and whether
the pageblock should be skipped during compaction. The bitmap may be
associated with a memory section or a zone but the zone is looked up
unconditionally. The compiler should optimise this away automatically
so this is a cosmetic patch only in many cases.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__dec_zone_state is cheaper to use for removing an order-0 page as it
has fewer conditions to check.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
optiter-v1r20 decstat-v1r20
Min alloc-odr0-1 382.00 ( 0.00%) 381.00 ( 0.26%)
Min alloc-odr0-2 282.00 ( 0.00%) 275.00 ( 2.48%)
Min alloc-odr0-4 233.00 ( 0.00%) 229.00 ( 1.72%)
Min alloc-odr0-8 203.00 ( 0.00%) 199.00 ( 1.97%)
Min alloc-odr0-16 188.00 ( 0.00%) 186.00 ( 1.06%)
Min alloc-odr0-32 182.00 ( 0.00%) 179.00 ( 1.65%)
Min alloc-odr0-64 177.00 ( 0.00%) 174.00 ( 1.69%)
Min alloc-odr0-128 175.00 ( 0.00%) 172.00 ( 1.71%)
Min alloc-odr0-256 184.00 ( 0.00%) 181.00 ( 1.63%)
Min alloc-odr0-512 197.00 ( 0.00%) 193.00 ( 2.03%)
Min alloc-odr0-1024 203.00 ( 0.00%) 201.00 ( 0.99%)
Min alloc-odr0-2048 209.00 ( 0.00%) 206.00 ( 1.44%)
Min alloc-odr0-4096 214.00 ( 0.00%) 212.00 ( 0.93%)
Min alloc-odr0-8192 218.00 ( 0.00%) 215.00 ( 1.38%)
Min alloc-odr0-16384 219.00 ( 0.00%) 216.00 ( 1.37%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page allocator iterates through a zonelist for zones that match the
addressing limitations and nodemask of the caller but many allocations
will not be restricted. Despite this, there is always functional call
overhead which builds up.
This patch inlines the optimistic basic case and only calls the iterator
function for the complex case. A hindrance was the fact that
cpuset_current_mems_allowed is used in the fastpath as the allowed
nodemask even though all nodes are allowed on most systems. The patch
handles this by only considering cpuset_current_mems_allowed if a cpuset
exists. As well as being faster in the fast-path, this removes some
junk in the slowpath.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
statinline-v1r20 optiter-v1r20
Min alloc-odr0-1 412.00 ( 0.00%) 382.00 ( 7.28%)
Min alloc-odr0-2 301.00 ( 0.00%) 282.00 ( 6.31%)
Min alloc-odr0-4 247.00 ( 0.00%) 233.00 ( 5.67%)
Min alloc-odr0-8 215.00 ( 0.00%) 203.00 ( 5.58%)
Min alloc-odr0-16 199.00 ( 0.00%) 188.00 ( 5.53%)
Min alloc-odr0-32 191.00 ( 0.00%) 182.00 ( 4.71%)
Min alloc-odr0-64 187.00 ( 0.00%) 177.00 ( 5.35%)
Min alloc-odr0-128 185.00 ( 0.00%) 175.00 ( 5.41%)
Min alloc-odr0-256 193.00 ( 0.00%) 184.00 ( 4.66%)
Min alloc-odr0-512 207.00 ( 0.00%) 197.00 ( 4.83%)
Min alloc-odr0-1024 213.00 ( 0.00%) 203.00 ( 4.69%)
Min alloc-odr0-2048 220.00 ( 0.00%) 209.00 ( 5.00%)
Min alloc-odr0-4096 226.00 ( 0.00%) 214.00 ( 5.31%)
Min alloc-odr0-8192 229.00 ( 0.00%) 218.00 ( 4.80%)
Min alloc-odr0-16384 229.00 ( 0.00%) 219.00 ( 4.37%)
perf indicated that next_zones_zonelist disappeared in the profile and
__next_zones_zonelist did not appear. This is expected as the
micro-benchmark would hit the inlined fast-path every time.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zone_statistics has one call-site but it's a public function. Make it
static and inline.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
statbranch-v1r20 statinline-v1r20
Min alloc-odr0-1 419.00 ( 0.00%) 412.00 ( 1.67%)
Min alloc-odr0-2 305.00 ( 0.00%) 301.00 ( 1.31%)
Min alloc-odr0-4 250.00 ( 0.00%) 247.00 ( 1.20%)
Min alloc-odr0-8 219.00 ( 0.00%) 215.00 ( 1.83%)
Min alloc-odr0-16 203.00 ( 0.00%) 199.00 ( 1.97%)
Min alloc-odr0-32 195.00 ( 0.00%) 191.00 ( 2.05%)
Min alloc-odr0-64 191.00 ( 0.00%) 187.00 ( 2.09%)
Min alloc-odr0-128 189.00 ( 0.00%) 185.00 ( 2.12%)
Min alloc-odr0-256 198.00 ( 0.00%) 193.00 ( 2.53%)
Min alloc-odr0-512 210.00 ( 0.00%) 207.00 ( 1.43%)
Min alloc-odr0-1024 216.00 ( 0.00%) 213.00 ( 1.39%)
Min alloc-odr0-2048 221.00 ( 0.00%) 220.00 ( 0.45%)
Min alloc-odr0-4096 227.00 ( 0.00%) 226.00 ( 0.44%)
Min alloc-odr0-8192 232.00 ( 0.00%) 229.00 ( 1.29%)
Min alloc-odr0-16384 232.00 ( 0.00%) 229.00 ( 1.29%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
zone_statistics has more branches than it really needs to take an
unlikely GFP flag into account. Reduce the number and annotate the
unlikely flag.
The performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
nocompound-v1r10 statbranch-v1r10
Min alloc-odr0-1 417.00 ( 0.00%) 419.00 ( -0.48%)
Min alloc-odr0-2 308.00 ( 0.00%) 305.00 ( 0.97%)
Min alloc-odr0-4 253.00 ( 0.00%) 250.00 ( 1.19%)
Min alloc-odr0-8 221.00 ( 0.00%) 219.00 ( 0.90%)
Min alloc-odr0-16 205.00 ( 0.00%) 203.00 ( 0.98%)
Min alloc-odr0-32 199.00 ( 0.00%) 195.00 ( 2.01%)
Min alloc-odr0-64 193.00 ( 0.00%) 191.00 ( 1.04%)
Min alloc-odr0-128 191.00 ( 0.00%) 189.00 ( 1.05%)
Min alloc-odr0-256 200.00 ( 0.00%) 198.00 ( 1.00%)
Min alloc-odr0-512 212.00 ( 0.00%) 210.00 ( 0.94%)
Min alloc-odr0-1024 219.00 ( 0.00%) 216.00 ( 1.37%)
Min alloc-odr0-2048 225.00 ( 0.00%) 221.00 ( 1.78%)
Min alloc-odr0-4096 231.00 ( 0.00%) 227.00 ( 1.73%)
Min alloc-odr0-8192 234.00 ( 0.00%) 232.00 ( 0.85%)
Min alloc-odr0-16384 234.00 ( 0.00%) 232.00 ( 0.85%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The PageAnon check always checks for compound_head but this is a
relatively expensive check if the caller already knows the page is a
head page. This patch creates a helper and uses it in the page free
path which only operates on head pages.
With this patch and "Only check PageCompound for high-order pages", the
performance difference on a page allocator microbenchmark is;
4.6.0-rc2 4.6.0-rc2
vanilla nocompound-v1r20
Min alloc-odr0-1 425.00 ( 0.00%) 417.00 ( 1.88%)
Min alloc-odr0-2 313.00 ( 0.00%) 308.00 ( 1.60%)
Min alloc-odr0-4 257.00 ( 0.00%) 253.00 ( 1.56%)
Min alloc-odr0-8 224.00 ( 0.00%) 221.00 ( 1.34%)
Min alloc-odr0-16 208.00 ( 0.00%) 205.00 ( 1.44%)
Min alloc-odr0-32 199.00 ( 0.00%) 199.00 ( 0.00%)
Min alloc-odr0-64 195.00 ( 0.00%) 193.00 ( 1.03%)
Min alloc-odr0-128 192.00 ( 0.00%) 191.00 ( 0.52%)
Min alloc-odr0-256 204.00 ( 0.00%) 200.00 ( 1.96%)
Min alloc-odr0-512 213.00 ( 0.00%) 212.00 ( 0.47%)
Min alloc-odr0-1024 219.00 ( 0.00%) 219.00 ( 0.00%)
Min alloc-odr0-2048 225.00 ( 0.00%) 225.00 ( 0.00%)
Min alloc-odr0-4096 230.00 ( 0.00%) 231.00 ( -0.43%)
Min alloc-odr0-8192 235.00 ( 0.00%) 234.00 ( 0.43%)
Min alloc-odr0-16384 235.00 ( 0.00%) 234.00 ( 0.43%)
Min free-odr0-1 215.00 ( 0.00%) 191.00 ( 11.16%)
Min free-odr0-2 152.00 ( 0.00%) 136.00 ( 10.53%)
Min free-odr0-4 119.00 ( 0.00%) 107.00 ( 10.08%)
Min free-odr0-8 106.00 ( 0.00%) 96.00 ( 9.43%)
Min free-odr0-16 97.00 ( 0.00%) 87.00 ( 10.31%)
Min free-odr0-32 91.00 ( 0.00%) 83.00 ( 8.79%)
Min free-odr0-64 89.00 ( 0.00%) 81.00 ( 8.99%)
Min free-odr0-128 88.00 ( 0.00%) 80.00 ( 9.09%)
Min free-odr0-256 106.00 ( 0.00%) 95.00 ( 10.38%)
Min free-odr0-512 116.00 ( 0.00%) 111.00 ( 4.31%)
Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%)
Min free-odr0-2048 133.00 ( 0.00%) 126.00 ( 5.26%)
Min free-odr0-4096 136.00 ( 0.00%) 130.00 ( 4.41%)
Min free-odr0-8192 138.00 ( 0.00%) 130.00 ( 5.80%)
Min free-odr0-16384 137.00 ( 0.00%) 130.00 ( 5.11%)
There is a sizable boost to the free allocator performance. While there
is an apparent boost on the allocation side, it's likely a co-incidence
or due to the patches slightly reducing cache footprint.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Another year, another round of page allocator optimisations focusing
this time on the alloc and free fast paths. This should be of help to
workloads that are allocator-intensive from kernel space where the cost
of zeroing is not nceessraily incurred.
The series is motivated by the observation that page alloc
microbenchmarks on multiple machines regressed between 3.12.44 and 4.4.
Second, there is discussions before LSF/MM considering the possibility
of adding another page allocator which is potentially hazardous but a
patch series improving performance is better than whining.
After the series is applied, there are still hazards. In the free
paths, the debugging checking and page zone/pageblock lookups dominate
but there was not an obvious solution to that. In the alloc path, the
major contributers are dealing with zonelists, new page preperation, the
fair zone allocation and numerous statistic updates. The fair zone
allocator is removed by the per-node LRU series if that gets merged so
it's nor a major concern at the moment.
On normal userspace benchmarks, there is little impact as the zeroing
cost is significant but it's visible
aim9
4.6.0-rc3 4.6.0-rc3
vanilla deferalloc-v3
Min page_test 828693.33 ( 0.00%) 887060.00 ( 7.04%)
Min brk_test 4847266.67 ( 0.00%) 4966266.67 ( 2.45%)
Min exec_test 1271.00 ( 0.00%) 1275.67 ( 0.37%)
Min fork_test 12371.75 ( 0.00%) 12380.00 ( 0.07%)
The overall impact on a page allocator microbenchmark for a range of orders
and number of pages allocated in a batch is
4.6.0-rc3 4.6.0-rc3
vanilla deferalloc-v3r7
Min alloc-odr0-1 428.00 ( 0.00%) 316.00 ( 26.17%)
Min alloc-odr0-2 314.00 ( 0.00%) 231.00 ( 26.43%)
Min alloc-odr0-4 256.00 ( 0.00%) 192.00 ( 25.00%)
Min alloc-odr0-8 222.00 ( 0.00%) 166.00 ( 25.23%)
Min alloc-odr0-16 207.00 ( 0.00%) 154.00 ( 25.60%)
Min alloc-odr0-32 197.00 ( 0.00%) 148.00 ( 24.87%)
Min alloc-odr0-64 193.00 ( 0.00%) 144.00 ( 25.39%)
Min alloc-odr0-128 191.00 ( 0.00%) 143.00 ( 25.13%)
Min alloc-odr0-256 203.00 ( 0.00%) 153.00 ( 24.63%)
Min alloc-odr0-512 212.00 ( 0.00%) 165.00 ( 22.17%)
Min alloc-odr0-1024 221.00 ( 0.00%) 172.00 ( 22.17%)
Min alloc-odr0-2048 225.00 ( 0.00%) 179.00 ( 20.44%)
Min alloc-odr0-4096 232.00 ( 0.00%) 185.00 ( 20.26%)
Min alloc-odr0-8192 235.00 ( 0.00%) 187.00 ( 20.43%)
Min alloc-odr0-16384 236.00 ( 0.00%) 188.00 ( 20.34%)
Min alloc-odr1-1 519.00 ( 0.00%) 450.00 ( 13.29%)
Min alloc-odr1-2 391.00 ( 0.00%) 336.00 ( 14.07%)
Min alloc-odr1-4 313.00 ( 0.00%) 268.00 ( 14.38%)
Min alloc-odr1-8 277.00 ( 0.00%) 235.00 ( 15.16%)
Min alloc-odr1-16 256.00 ( 0.00%) 218.00 ( 14.84%)
Min alloc-odr1-32 252.00 ( 0.00%) 212.00 ( 15.87%)
Min alloc-odr1-64 244.00 ( 0.00%) 206.00 ( 15.57%)
Min alloc-odr1-128 244.00 ( 0.00%) 207.00 ( 15.16%)
Min alloc-odr1-256 243.00 ( 0.00%) 207.00 ( 14.81%)
Min alloc-odr1-512 245.00 ( 0.00%) 209.00 ( 14.69%)
Min alloc-odr1-1024 248.00 ( 0.00%) 214.00 ( 13.71%)
Min alloc-odr1-2048 253.00 ( 0.00%) 220.00 ( 13.04%)
Min alloc-odr1-4096 258.00 ( 0.00%) 224.00 ( 13.18%)
Min alloc-odr1-8192 261.00 ( 0.00%) 229.00 ( 12.26%)
Min alloc-odr2-1 560.00 ( 0.00%) 753.00 (-34.46%)
Min alloc-odr2-2 424.00 ( 0.00%) 351.00 ( 17.22%)
Min alloc-odr2-4 339.00 ( 0.00%) 393.00 (-15.93%)
Min alloc-odr2-8 298.00 ( 0.00%) 246.00 ( 17.45%)
Min alloc-odr2-16 276.00 ( 0.00%) 227.00 ( 17.75%)
Min alloc-odr2-32 271.00 ( 0.00%) 221.00 ( 18.45%)
Min alloc-odr2-64 264.00 ( 0.00%) 217.00 ( 17.80%)
Min alloc-odr2-128 264.00 ( 0.00%) 217.00 ( 17.80%)
Min alloc-odr2-256 264.00 ( 0.00%) 218.00 ( 17.42%)
Min alloc-odr2-512 269.00 ( 0.00%) 223.00 ( 17.10%)
Min alloc-odr2-1024 279.00 ( 0.00%) 230.00 ( 17.56%)
Min alloc-odr2-2048 283.00 ( 0.00%) 235.00 ( 16.96%)
Min alloc-odr2-4096 285.00 ( 0.00%) 239.00 ( 16.14%)
Min alloc-odr3-1 629.00 ( 0.00%) 505.00 ( 19.71%)
Min alloc-odr3-2 472.00 ( 0.00%) 374.00 ( 20.76%)
Min alloc-odr3-4 383.00 ( 0.00%) 301.00 ( 21.41%)
Min alloc-odr3-8 341.00 ( 0.00%) 266.00 ( 21.99%)
Min alloc-odr3-16 316.00 ( 0.00%) 248.00 ( 21.52%)
Min alloc-odr3-32 308.00 ( 0.00%) 241.00 ( 21.75%)
Min alloc-odr3-64 305.00 ( 0.00%) 241.00 ( 20.98%)
Min alloc-odr3-128 308.00 ( 0.00%) 244.00 ( 20.78%)
Min alloc-odr3-256 317.00 ( 0.00%) 249.00 ( 21.45%)
Min alloc-odr3-512 327.00 ( 0.00%) 256.00 ( 21.71%)
Min alloc-odr3-1024 331.00 ( 0.00%) 261.00 ( 21.15%)
Min alloc-odr3-2048 333.00 ( 0.00%) 266.00 ( 20.12%)
Min alloc-odr4-1 767.00 ( 0.00%) 572.00 ( 25.42%)
Min alloc-odr4-2 578.00 ( 0.00%) 429.00 ( 25.78%)
Min alloc-odr4-4 474.00 ( 0.00%) 346.00 ( 27.00%)
Min alloc-odr4-8 422.00 ( 0.00%) 310.00 ( 26.54%)
Min alloc-odr4-16 399.00 ( 0.00%) 295.00 ( 26.07%)
Min alloc-odr4-32 392.00 ( 0.00%) 293.00 ( 25.26%)
Min alloc-odr4-64 394.00 ( 0.00%) 293.00 ( 25.63%)
Min alloc-odr4-128 405.00 ( 0.00%) 305.00 ( 24.69%)
Min alloc-odr4-256 417.00 ( 0.00%) 319.00 ( 23.50%)
Min alloc-odr4-512 425.00 ( 0.00%) 326.00 ( 23.29%)
Min alloc-odr4-1024 426.00 ( 0.00%) 329.00 ( 22.77%)
Min free-odr0-1 216.00 ( 0.00%) 178.00 ( 17.59%)
Min free-odr0-2 152.00 ( 0.00%) 125.00 ( 17.76%)
Min free-odr0-4 120.00 ( 0.00%) 99.00 ( 17.50%)
Min free-odr0-8 106.00 ( 0.00%) 85.00 ( 19.81%)
Min free-odr0-16 97.00 ( 0.00%) 80.00 ( 17.53%)
Min free-odr0-32 92.00 ( 0.00%) 76.00 ( 17.39%)
Min free-odr0-64 89.00 ( 0.00%) 74.00 ( 16.85%)
Min free-odr0-128 89.00 ( 0.00%) 73.00 ( 17.98%)
Min free-odr0-256 107.00 ( 0.00%) 90.00 ( 15.89%)
Min free-odr0-512 117.00 ( 0.00%) 108.00 ( 7.69%)
Min free-odr0-1024 125.00 ( 0.00%) 118.00 ( 5.60%)
Min free-odr0-2048 132.00 ( 0.00%) 125.00 ( 5.30%)
Min free-odr0-4096 135.00 ( 0.00%) 130.00 ( 3.70%)
Min free-odr0-8192 137.00 ( 0.00%) 130.00 ( 5.11%)
Min free-odr0-16384 137.00 ( 0.00%) 131.00 ( 4.38%)
Min free-odr1-1 318.00 ( 0.00%) 289.00 ( 9.12%)
Min free-odr1-2 228.00 ( 0.00%) 207.00 ( 9.21%)
Min free-odr1-4 182.00 ( 0.00%) 165.00 ( 9.34%)
Min free-odr1-8 163.00 ( 0.00%) 146.00 ( 10.43%)
Min free-odr1-16 151.00 ( 0.00%) 135.00 ( 10.60%)
Min free-odr1-32 146.00 ( 0.00%) 129.00 ( 11.64%)
Min free-odr1-64 145.00 ( 0.00%) 130.00 ( 10.34%)
Min free-odr1-128 148.00 ( 0.00%) 134.00 ( 9.46%)
Min free-odr1-256 148.00 ( 0.00%) 137.00 ( 7.43%)
Min free-odr1-512 151.00 ( 0.00%) 140.00 ( 7.28%)
Min free-odr1-1024 154.00 ( 0.00%) 143.00 ( 7.14%)
Min free-odr1-2048 156.00 ( 0.00%) 144.00 ( 7.69%)
Min free-odr1-4096 156.00 ( 0.00%) 142.00 ( 8.97%)
Min free-odr1-8192 156.00 ( 0.00%) 140.00 ( 10.26%)
Min free-odr2-1 361.00 ( 0.00%) 457.00 (-26.59%)
Min free-odr2-2 258.00 ( 0.00%) 224.00 ( 13.18%)
Min free-odr2-4 208.00 ( 0.00%) 223.00 ( -7.21%)
Min free-odr2-8 185.00 ( 0.00%) 160.00 ( 13.51%)
Min free-odr2-16 173.00 ( 0.00%) 149.00 ( 13.87%)
Min free-odr2-32 166.00 ( 0.00%) 145.00 ( 12.65%)
Min free-odr2-64 166.00 ( 0.00%) 146.00 ( 12.05%)
Min free-odr2-128 169.00 ( 0.00%) 148.00 ( 12.43%)
Min free-odr2-256 170.00 ( 0.00%) 152.00 ( 10.59%)
Min free-odr2-512 177.00 ( 0.00%) 156.00 ( 11.86%)
Min free-odr2-1024 182.00 ( 0.00%) 162.00 ( 10.99%)
Min free-odr2-2048 181.00 ( 0.00%) 160.00 ( 11.60%)
Min free-odr2-4096 180.00 ( 0.00%) 159.00 ( 11.67%)
Min free-odr3-1 431.00 ( 0.00%) 367.00 ( 14.85%)
Min free-odr3-2 306.00 ( 0.00%) 259.00 ( 15.36%)
Min free-odr3-4 249.00 ( 0.00%) 208.00 ( 16.47%)
Min free-odr3-8 224.00 ( 0.00%) 186.00 ( 16.96%)
Min free-odr3-16 208.00 ( 0.00%) 176.00 ( 15.38%)
Min free-odr3-32 206.00 ( 0.00%) 174.00 ( 15.53%)
Min free-odr3-64 210.00 ( 0.00%) 178.00 ( 15.24%)
Min free-odr3-128 215.00 ( 0.00%) 182.00 ( 15.35%)
Min free-odr3-256 224.00 ( 0.00%) 189.00 ( 15.62%)
Min free-odr3-512 232.00 ( 0.00%) 195.00 ( 15.95%)
Min free-odr3-1024 230.00 ( 0.00%) 195.00 ( 15.22%)
Min free-odr3-2048 229.00 ( 0.00%) 193.00 ( 15.72%)
Min free-odr4-1 561.00 ( 0.00%) 439.00 ( 21.75%)
Min free-odr4-2 418.00 ( 0.00%) 318.00 ( 23.92%)
Min free-odr4-4 339.00 ( 0.00%) 269.00 ( 20.65%)
Min free-odr4-8 299.00 ( 0.00%) 239.00 ( 20.07%)
Min free-odr4-16 289.00 ( 0.00%) 234.00 ( 19.03%)
Min free-odr4-32 291.00 ( 0.00%) 235.00 ( 19.24%)
Min free-odr4-64 298.00 ( 0.00%) 238.00 ( 20.13%)
Min free-odr4-128 308.00 ( 0.00%) 251.00 ( 18.51%)
Min free-odr4-256 321.00 ( 0.00%) 267.00 ( 16.82%)
Min free-odr4-512 327.00 ( 0.00%) 269.00 ( 17.74%)
Min free-odr4-1024 326.00 ( 0.00%) 271.00 ( 16.87%)
Min total-odr0-1 644.00 ( 0.00%) 494.00 ( 23.29%)
Min total-odr0-2 466.00 ( 0.00%) 356.00 ( 23.61%)
Min total-odr0-4 376.00 ( 0.00%) 291.00 ( 22.61%)
Min total-odr0-8 328.00 ( 0.00%) 251.00 ( 23.48%)
Min total-odr0-16 304.00 ( 0.00%) 234.00 ( 23.03%)
Min total-odr0-32 289.00 ( 0.00%) 224.00 ( 22.49%)
Min total-odr0-64 282.00 ( 0.00%) 218.00 ( 22.70%)
Min total-odr0-128 280.00 ( 0.00%) 216.00 ( 22.86%)
Min total-odr0-256 310.00 ( 0.00%) 243.00 ( 21.61%)
Min total-odr0-512 329.00 ( 0.00%) 273.00 ( 17.02%)
Min total-odr0-1024 346.00 ( 0.00%) 290.00 ( 16.18%)
Min total-odr0-2048 357.00 ( 0.00%) 304.00 ( 14.85%)
Min total-odr0-4096 367.00 ( 0.00%) 315.00 ( 14.17%)
Min total-odr0-8192 372.00 ( 0.00%) 317.00 ( 14.78%)
Min total-odr0-16384 373.00 ( 0.00%) 319.00 ( 14.48%)
Min total-odr1-1 838.00 ( 0.00%) 739.00 ( 11.81%)
Min total-odr1-2 619.00 ( 0.00%) 543.00 ( 12.28%)
Min total-odr1-4 495.00 ( 0.00%) 433.00 ( 12.53%)
Min total-odr1-8 440.00 ( 0.00%) 382.00 ( 13.18%)
Min total-odr1-16 407.00 ( 0.00%) 353.00 ( 13.27%)
Min total-odr1-32 398.00 ( 0.00%) 341.00 ( 14.32%)
Min total-odr1-64 389.00 ( 0.00%) 336.00 ( 13.62%)
Min total-odr1-128 392.00 ( 0.00%) 341.00 ( 13.01%)
Min total-odr1-256 391.00 ( 0.00%) 344.00 ( 12.02%)
Min total-odr1-512 396.00 ( 0.00%) 349.00 ( 11.87%)
Min total-odr1-1024 402.00 ( 0.00%) 357.00 ( 11.19%)
Min total-odr1-2048 409.00 ( 0.00%) 364.00 ( 11.00%)
Min total-odr1-4096 414.00 ( 0.00%) 366.00 ( 11.59%)
Min total-odr1-8192 417.00 ( 0.00%) 369.00 ( 11.51%)
Min total-odr2-1 921.00 ( 0.00%) 1210.00 (-31.38%)
Min total-odr2-2 682.00 ( 0.00%) 576.00 ( 15.54%)
Min total-odr2-4 547.00 ( 0.00%) 616.00 (-12.61%)
Min total-odr2-8 483.00 ( 0.00%) 406.00 ( 15.94%)
Min total-odr2-16 449.00 ( 0.00%) 376.00 ( 16.26%)
Min total-odr2-32 437.00 ( 0.00%) 366.00 ( 16.25%)
Min total-odr2-64 431.00 ( 0.00%) 363.00 ( 15.78%)
Min total-odr2-128 433.00 ( 0.00%) 365.00 ( 15.70%)
Min total-odr2-256 434.00 ( 0.00%) 371.00 ( 14.52%)
Min total-odr2-512 446.00 ( 0.00%) 379.00 ( 15.02%)
Min total-odr2-1024 461.00 ( 0.00%) 392.00 ( 14.97%)
Min total-odr2-2048 464.00 ( 0.00%) 395.00 ( 14.87%)
Min total-odr2-4096 465.00 ( 0.00%) 398.00 ( 14.41%)
Min total-odr3-1 1060.00 ( 0.00%) 872.00 ( 17.74%)
Min total-odr3-2 778.00 ( 0.00%) 633.00 ( 18.64%)
Min total-odr3-4 632.00 ( 0.00%) 510.00 ( 19.30%)
Min total-odr3-8 565.00 ( 0.00%) 452.00 ( 20.00%)
Min total-odr3-16 524.00 ( 0.00%) 424.00 ( 19.08%)
Min total-odr3-32 514.00 ( 0.00%) 415.00 ( 19.26%)
Min total-odr3-64 515.00 ( 0.00%) 419.00 ( 18.64%)
Min total-odr3-128 523.00 ( 0.00%) 426.00 ( 18.55%)
Min total-odr3-256 541.00 ( 0.00%) 438.00 ( 19.04%)
Min total-odr3-512 559.00 ( 0.00%) 451.00 ( 19.32%)
Min total-odr3-1024 561.00 ( 0.00%) 456.00 ( 18.72%)
Min total-odr3-2048 562.00 ( 0.00%) 459.00 ( 18.33%)
Min total-odr4-1 1328.00 ( 0.00%) 1011.00 ( 23.87%)
Min total-odr4-2 997.00 ( 0.00%) 747.00 ( 25.08%)
Min total-odr4-4 813.00 ( 0.00%) 615.00 ( 24.35%)
Min total-odr4-8 721.00 ( 0.00%) 550.00 ( 23.72%)
Min total-odr4-16 689.00 ( 0.00%) 529.00 ( 23.22%)
Min total-odr4-32 683.00 ( 0.00%) 528.00 ( 22.69%)
Min total-odr4-64 692.00 ( 0.00%) 531.00 ( 23.27%)
Min total-odr4-128 713.00 ( 0.00%) 556.00 ( 22.02%)
Min total-odr4-256 738.00 ( 0.00%) 586.00 ( 20.60%)
Min total-odr4-512 753.00 ( 0.00%) 595.00 ( 20.98%)
Min total-odr4-1024 752.00 ( 0.00%) 600.00 ( 20.21%)
This patch (of 27):
order-0 pages by definition cannot be compound so avoid the check in the
fast path for those pages.
[akpm@linux-foundation.org: use unlikely(order) in free_pages_prepare(), per Vlastimil]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Right now the oom reaper will clear TIF_MEMDIE only for tasks which were
successfully reaped. This is the safest option because we know that
such an oom victim would only block forward progress of the oom killer
without a good reason because it is highly unlikely it would release
much more memory. Basically most of its memory has been already torn
down.
We can relax this assumption to catch more corner cases though.
The first obvious one is when the oom victim clears its mm and gets
stuck later on. oom_reaper would back of on find_lock_task_mm returning
NULL. We can safely try to clear TIF_MEMDIE in this case because such a
task would be ignored by the oom killer anyway. The flag would be
cleared by that time already most of the time anyway.
The less obvious one is when the oom reaper fails due to mmap_sem
contention. Even if we clear TIF_MEMDIE for this task then it is not
very likely that we would select another task too easily because we
haven't reaped the last victim and so it would be still the #1
candidate. There is a rare race condition possible when the current
victim terminates before the next select_bad_process but considering
that oom_reap_task had retried several times before giving up then this
sounds like a borderline thing.
After this patch we should have a guarantee that the OOM killer will not
be block for unbounded amount of time for most cases.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If either the current task is already killed or PF_EXITING or a selected
task is PF_EXITING then the oom killer is suppressed and so is the oom
reaper. This patch adds try_oom_reaper which checks the given task and
queues it for the oom reaper if that is safe to be done meaning that the
task doesn't share the mm with an alive process.
This might help to release the memory pressure while the task tries to
exit.
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__alloc_pages_may_oom is the central place to decide when the
out_of_memory should be invoked. This is a good approach for most
checks there because they are page allocator specific and the allocation
fails right after for all of them.
The notable exception is GFP_NOFS context which is faking
did_some_progress and keep the page allocator looping even though there
couldn't have been any progress from the OOM killer. This patch doesn't
change this behavior because we are not ready to allow those allocation
requests to fail yet (and maybe we will face the reality that we will
never manage to safely fail these request). Instead __GFP_FS check is
moved down to out_of_memory and prevent from OOM victim selection there.
There are two reasons for that
- OOM notifiers might release some memory even from this context
as none of the registered notifier seems to be FS related
- this might help a dying thread to get an access to memory
reserves and move on which will make the behavior more
consistent with the case when the task gets killed from a
different context.
Keep a comment in __alloc_pages_may_oom to make sure we do not forget
how GFP_NOFS is special and that we really want to do something about
it.
Note to the current oom_notifier users:
The observable difference for you is that oom notifiers cannot depend on
any fs locks because we could deadlock. Not that this would be allowed
today because that would just lockup machine in most of the cases and
ruling out the OOM killer along the way. Another difference is that
callbacks might be invoked sooner now because GFP_NOFS is a weaker
reclaim context and so there could be reclaimable memory which is just
not reachable now. That would require GFP_NOFS only loads which are
really rare and more importantly the observable result would be dropping
of reconstructible object and potential performance drop which is not
such a big deal when we are struggling to fulfill other important
allocation requests.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Raushaniya Maksudova <rmaksudova@parallels.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE specifies the default value for the
memory hotplug onlining policy. Add a command line parameter to make it
possible to override the default. It may come handy for debug and
testing purposes.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patchset continues the work I started with commit 31bc3858ea3e
("memory-hotplug: add automatic onlining policy for the newly added
memory").
Initially I was going to stop there and bring the policy setting logic
to userspace. I met two issues on this way:
1) It is possible to have memory hotplugged at boot (e.g. with QEMU).
These blocks stay offlined if we turn the onlining policy on by
userspace.
2) My attempt to bring this policy setting to systemd failed, systemd
maintainers suggest to change the default in kernel or ... to use
tmpfiles.d to alter the policy (which looks like a hack to me):
https://github.com/systemd/systemd/pull/2938
Here I suggest to add a config option to set the default value for the
policy and a kernel command line parameter to make the override.
This patch (of 2):
Introduce config option to set the default value for memory hotplug
onlining policy (/sys/devices/system/memory/auto_online_blocks). The
reason one would want to turn this option on are to have early onlining
for hotpluggable memory available at boot and to not require any
userspace actions to make memory hotplug work.
[akpm@linux-foundation.org: tweak Kconfig text]
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Whatever huge pagecache implementation we go with, file rmap locking
must be added to anon rmap locking, when mremap's move_page_tables()
finds a pmd_trans_huge pmd entry: a simple change, let's do it now.
Factor out take_rmap_locks() and drop_rmap_locks() to handle the locking
for make move_ptes() and move_page_tables(), and delete the
VM_BUG_ON_VMA which rejected vm_file and required anon_vma.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove move_huge_pmd()'s redundant new_vma arg: all it was used for was
a VM_NOHUGEPAGE check on new_vma flags, but the new_vma is cloned from
the old vma, so a trans_huge_pmd in the new_vma will be as acceptable as
it was in the old vma, alignment and size permitting.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide /proc/sys/vm/stat_refresh to force an immediate update of
per-cpu into global vmstats: useful to avoid a sleep(2) or whatever
before checking counts when testing. Originally added to work around a
bug which left counts stranded indefinitely on a cpu going idle (an
inaccuracy magnified when small below-batch numbers represent "huge"
amounts of memory), but I believe that bug is now fixed: nonetheless,
this is still a useful knob.
Its schedule_on_each_cpu() is probably too expensive just to fold into
reading /proc/meminfo itself: give this mode 0600 to prevent abuse.
Allow a write or a read to do the same: nothing to read, but "grep -h
Shmem /proc/sys/vm/stat_refresh /proc/meminfo" is convenient. Oh, and
since global_page_state() itself is careful to disguise any underflow as
0, hack in an "Invalid argument" and pr_warn() if a counter is negative
after the refresh - this helped to fix a misaccounting of
NR_ISOLATED_FILE in my migration code.
But on recent kernels, I find that NR_ALLOC_BATCH and NR_PAGES_SCANNED
often go negative some of the time. I have not yet worked out why, but
have no evidence that it's actually harmful. Punt for the moment by
just ignoring the anomaly on those.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Although shmem_fault() has been careful to count a major fault to vm_mm,
shmem_getpage_gfp() has been careless in charging a remote access fault
to current->mm owner's memcg instead of to vma->vm_mm owner's memcg:
that is inconsistent with all the mem_cgroup charging on remote access
faults in mm/memory.c.
Fix it by passing fault_mm along with fault_type to
shmem_get_page_gfp(); but in that case, now knowing the right mm, it's
better for it to handle the PGMAJFAULT updates itself.
And let's keep this clutter out of most callers' way: change the common
shmem_getpage() wrapper to hide fault_mm and fault_type as well as gfp.
Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make a few cleanups in mm/shmem.c, before going on to complicate it.
shmem_alloc_page() will become more complicated: we can't afford to to
have that complication duplicated between a CONFIG_NUMA version and a
!CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a
single shmem_swapin() and a single shmem_alloc_page().
Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA
configurations, but eliminating it is a larger cleanup: I have an
alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and
bug-prone, and changed yet again since my last version.
Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to
shmem_alloc_page(): that SwapBacked flag will be useful in future, to
help to distinguish different cases appropriately.
And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of
little use (IIRC it dates back to when shmem_getpage() returned the page
unlocked): kill it and do the necessary in shmem_file_read_iter().
But an arm64 build then complained that info may be uninitialized (where
shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and
advancing to an "sgp <= SGP_CACHE" test jogged it back to reality.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
v3.16 commit 07a427884348 ("mm: shmem: avoid atomic operation during
shmem_getpage_gfp") rightly replaced one instance of SetPageSwapBacked
by __SetPageSwapBacked, pointing out that the newly allocated page is
not yet visible to other users (except speculative get_page_unless_zero-
ers, who may not update page flags before their further checks).
That was part of a series in which Mel was focused on tmpfs profiles:
but almost all SetPageSwapBacked uses can be so optimized, with the same
justification.
Remove ClearPageSwapBacked from __read_swap_cache_async() error path:
it's not an error to free a page with PG_swapbacked set.
Follow a convention of __SetPageLocked, __SetPageSwapBacked instead of
doing it differently in different places; but that's for tidiness - if
the ordering actually mattered, we should not be using the __variants.
There's probably scope for further __SetPageFlags in other places, but
SwapBacked is the one I'm interested in at the moment.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Reviewed-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy
reclaim was removed) that lru_size can be updated by -nr_taken once per
call to isolate_lru_pages(), instead of page by page.
Update it inside isolate_lru_pages(), or at its two callsites? I chose
to update it at the callsites, rearranging and grouping the updates by
nr_taken and nr_scanned together in both.
With one exception, mem_cgroup_update_lru_size(,lru,) is then used where
__mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding
some more calls in a future commit. Make the code a little smaller and
simpler by incorporating stat update in lru_size update.
The exception was move_active_pages_to_lru(), which aggregated the
pgmoved stat update separately from the individual lru_size updates; but
I still think this a simplification worth making.
However, the __mod_zone_page_state is not peculiar to mem_cgroups: so
better use the name update_lru_size, calls mem_cgroup_update_lru_size
when CONFIG_MEMCG.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Though debug kernels have a VM_BUG_ON to help protect from misaccounting
lru_size, non-debug kernels are liable to wrap it around: and then the
vast unsigned long size draws page reclaim into a loop of repeatedly
doing nothing on an empty list, without even a cond_resched().
That soft lockup looks confusingly like an over-busy reclaim scenario,
with lots of contention on the lru_lock in shrink_inactive_list(): yet
has a totally different origin.
Help differentiate with a custom warning in
mem_cgroup_update_lru_size(), even in non-debug kernels; and reset the
size to avoid the lockup. But the particular bug which suggested this
change was mine alone, and since fixed.
Make it a WARN_ONCE: the first occurrence is the most informative, a
flurry may follow, yet even when rate-limited little more is learnt.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Nobody uses it.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
node_page_state() manually adds statistics per each zone and returns
total value for all zones. Whenever we add a new zone, we need to
consider this function and it's really troublesome. Make it handle all
zones by itself.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nr_free_highpages() manually adds statistics per each highmem zone and
returns a total value for them. Whenever we add a new highmem zone, we
need to consider this function and it's really troublesome. Make it
handle all highmem zones by itself.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ZONE_MOVABLE could be treated as highmem so we need to consider it for
accurate statistics. And, in following patches, ZONE_CMA will be
introduced and it can be treated as highmem, too. So, instead of
manually adding stat of ZONE_MOVABLE, looping all zones and check
whether the zone is highmem or not and add stat of the zone which can be
treated as highmem.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ZONE_MOVABLE could be treated as highmem so we need to consider it for
accurate calculation of dirty pages. And, in following patches,
ZONE_CMA will be introduced and it can be treated as highmem, too. So,
instead of manually adding stat of ZONE_MOVABLE, looping all zones and
check whether the zone is highmem or not and add stat of the zone which
can be treated as highmem.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
