summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)Author
2017-02-24mm/page-writeback.c: place "not" inside of unlikely() statement in ↵Steven Rostedt (VMware)
wb_domain_writeout_inc() The likely/unlikely profiler noticed that the unlikely statement in wb_domain_writeout_inc() is constantly wrong. This is due to the "not" (!) being outside the unlikely statement. It is likely that dom->period_time will be set, but unlikely that it wont be. Move the not into the unlikely statement. Link: http://lkml.kernel.org/r/20170206120035.3c2e2b91@gandalf.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/ksm: handle protnone saved writes when making page write protectAneesh Kumar K.V
Without this KSM will consider the page write protected, but a numa fault can later mark the page writable. This can result in memory corruption. Link: http://lkml.kernel.org/r/1487498625-10891-3-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/autonuma: let architecture override how the write bit should be stashed ↵Aneesh Kumar K.V
in a protnone pte. Patch series "Numabalancing preserve write fix", v2. This patch series address an issue w.r.t THP migration and autonuma preserve write feature. migrate_misplaced_transhuge_page() cannot deal with concurrent modification of the page. It does a page copy without following the migration pte sequence. IIUC, this was done to keep the migration simpler and at the time of implemenation we didn't had THP page cache which would have required a more elaborate migration scheme. That means thp autonuma migration expect the protnone with saved write to be done such that both kernel and user cannot update the page content. This patch series enables archs like ppc64 to do that. We are good with the hash translation mode with the current code, because we never create a hardware page table entry for a protnone pte. This patch (of 2): Autonuma preserves the write permission across numa fault to avoid taking a writefault after a numa fault (Commit: b191f9b106ea " mm: numa: preserve PTE write permissions across a NUMA hinting fault"). Architecture can implement protnone in different ways and some may choose to implement that by clearing Read/ Write/Exec bit of pte. Setting the write bit on such pte can result in wrong behaviour. Fix this up by allowing arch to override how to save the write bit on a protnone pte. [aneesh.kumar@linux.vnet.ibm.com: don't mark pte saved write in case of dirty_accountable] Link: http://lkml.kernel.org/r/1487942884-16517-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com [aneesh.kumar@linux.vnet.ibm.com: v3] Link: http://lkml.kernel.org/r/1487498625-10891-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1487050314-3892-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <michaele@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/autonuma: don't use set_pte_at when updating protnone ptesAneesh Kumar K.V
Architectures like ppc64, use privilege access bit to mark pte non accessible. This implies that kernel can do a copy_to_user to an address marked for numa fault. This also implies that there can be a parallel hardware update for the pte. set_pte_at cannot be used in such scenarios. Hence switch the pte update to use ptep_get_and_clear and set_pte_at combination. [akpm@linux-foundation.org: remove unwanted ppc change, per Aneesh] Link: http://lkml.kernel.org/r/1486400776-28114-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/shmem.c: fix unlikely() test of info->seals to test only for WRITE and GROWSteven Rostedt (VMware)
Running my likely/unlikely profiler, I discovered that the test in shmem_write_begin() that tests for info->seals as unlikely, is always incorrect. This is because shmem_get_inode() sets info->seals to have F_SEAL_SEAL set by default, and it is unlikely to be cleared when shmem_write_begin() is called. Thus, the if statement is very likely. But as the if statement block only cares about F_SEAL_WRITE and F_SEAL_GROW, change the test to only test those two bits. Link: http://lkml.kernel.org/r/20170203105656.7aec6237@gandalf.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, vmscan: clear PGDAT_WRITEBACK when zone is balancedMel Gorman
Hillf Danton pointed out that since commit 1d82de618dd ("mm, vmscan: make kswapd reclaim in terms of nodes") that PGDAT_WRITEBACK is no longer cleared. It was not noticed as triggering it requires pages under writeback to cycle twice through the LRU and before kswapd gets stalled. Historically, such issues tended to occur on small machines writing heavily to slow storage such as a USB stick. Once kswapd stalls, direct reclaim stalls may be higher but due to the fact that memory pressure is required, it would not be very noticable. Michal Hocko suggested removing the flag entirely but the conservative fix is to restore the intended PGDAT_WRITEBACK behaviour and clear the flag when a suitable zone is balanced. Fixes: 1d82de618ddd ("mm, vmscan: make kswapd reclaim in terms of nodes") Link: http://lkml.kernel.org/r/20170203203222.gq7hk66yc36lpgtb@suse.de Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: codgin-style fixesTobin C Harding
Fix whitespace issues, extraneous braces. Link: http://lkml.kernel.org/r/1485992240-10986-5-git-send-email-me@tobin.cc Signed-off-by: Tobin C Harding <me@tobin.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/memory.c: use NULL instead of literal 0Tobin C Harding
Patch fixes sparse warning: Using plain integer as NULL pointer. Replaces assignment of 0 to pointer with NULL assignment. Link: http://lkml.kernel.org/r/1485992240-10986-2-git-send-email-me@tobin.cc Signed-off-by: Tobin C Harding <me@tobin.cc> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/page_alloc.c: remove duplicate inclusion of page_ext.hMasanari Iida
Link: http://lkml.kernel.org/r/20170202011942.1609-1-standby24x7@gmail.com Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24vmalloc: back off when the current task is killedMichal Hocko
__vmalloc_area_node() allocates pages to cover the requested vmalloc size. This can be a lot of memory. If the current task is killed by the OOM killer, and thus has an unlimited access to memory reserves, it can consume all the memory theoretically. Fix this by checking for fatal_signal_pending and back off early. Link: http://lkml.kernel.org/r/20170201092706.9966-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: cma: print allocation failure reason and bitmap statusJaewon Kim
There are many reasons of CMA allocation failure such as EBUSY, ENOMEM, EINTR. But we did not know error reason so far. This patch prints the error value. Additionally if CONFIG_CMA_DEBUG is enabled, this patch shows bitmap status to know available pages. Actually CMA internally tries on all available regions because some regions can be failed because of EBUSY. Bitmap status is useful to know in detail on both ENONEM and EBUSY; ENOMEM: not tried at all because of no available region it could be too small total region or could be fragmentation issue EBUSY: tried some region but all failed This is an ENOMEM example with this patch. [2: Binder:714_1: 744] cma: cma_alloc: alloc failed, req-size: 256 pages, ret: -12 If CONFIG_CMA_DEBUG is enabled, avabile pages also will be shown as concatenated size@position format. So 4@572 means that there are 4 available pages at 572 position starting from 0 position. [2: Binder:714_1: 744] cma: number of available pages: 4@572+7@585+7@601+8@632+38@730+166@1114+127@1921=> 357 free of 2048 total pages Link: http://lkml.kernel.org/r/1485909785-3952-1-git-send-email-jaewon31.kim@samsung.com Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, madvise: fail with ENOMEM when splitting vma will hit max_map_countDavid Rientjes
If madvise(2) advice will result in the underlying vma being split and the number of areas mapped by the process will exceed /proc/sys/vm/max_map_count as a result, return ENOMEM instead of EAGAIN. EAGAIN is returned by madvise(2) when a kernel resource, such as slab, is temporarily unavailable. It indicates that userspace should retry the advice in the near future. This is important for advice such as MADV_DONTNEED which is often used by malloc implementations to free memory back to the system: we really do want to free memory back when madvise(2) returns EAGAIN because slab allocations (for vmas, anon_vmas, or mempolicies) cannot be allocated. Encountering /proc/sys/vm/max_map_count is not a temporary failure, however, so return ENOMEM to indicate this is a more serious issue. A followup patch to the man page will specify this behavior. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701241431120.42507@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: cma_alloc: allow to specify GFP maskLucas Stach
Most users of this interface just want to use it with the default GFP_KERNEL flags, but for cases where DMA memory is allocated it may be called from a different context. No functional change yet, just passing through the flag to the underlying alloc_contig_range function. Link: http://lkml.kernel.org/r/20170127172328.18574-2-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: alloc_contig_range: allow to specify GFP maskLucas Stach
Currently alloc_contig_range assumes that the compaction should be done with the default GFP_KERNEL flags. This is probably right for all current uses of this interface, but may change as CMA is used in more use-cases (including being the default DMA memory allocator on some platforms). Change the function prototype, to allow for passing through the GFP mask set by upper layers. Also respect global restrictions by applying memalloc_noio_flags to the passed in flags. Link: http://lkml.kernel.org/r/20170127172328.18574-1-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24userfaultfd: mcopy_atomic: return -ENOENT when no compatible VMA foundMike Rapoport
The memory mapping of a process may change between #PF event and the call to mcopy_atomic that comes to resolve the page fault. In such case, there will be no VMA covering the range passed to mcopy_atomic or the VMA will not have userfaultfd context. To allow uffd monitor to distinguish those case from other errors, let's return -ENOENT instead of -EINVAL. Note, that despite availability of UFFD_EVENT_UNMAP there still might be race between the processing of UFFD_EVENT_UNMAP and outstanding mcopy_atomic in case of non-cooperative uffd usage. [rppt@linux.vnet.ibm.com: update cases returning -ENOENT] Link: http://lkml.kernel.org/r/20170207150249.GA6709@rapoport-lnx [aarcange@redhat.com: merge fix] [akpm@linux-foundation.org: fix the merge fix] Link: http://lkml.kernel.org/r/1485542673-24387-5-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24userfaultfd: non-cooperative: add event for memory unmapsMike Rapoport
When a non-cooperative userfaultfd monitor copies pages in the background, it may encounter regions that were already unmapped. Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely changes in the virtual memory layout. Since there might be different uffd contexts for the affected VMAs, we first should create a temporary representation for the unmap event for each uffd context and then notify them one by one to the appropriate userfault file descriptors. The event notification occurs after the mmap_sem has been released. [arnd@arndb.de: fix nommu build] Link: http://lkml.kernel.org/r/20170203165141.3665284-1-arnd@arndb.de [mhocko@suse.com: fix nommu build] Link: http://lkml.kernel.org/r/20170202091503.GA22823@dhcp22.suse.cz Link: http://lkml.kernel.org/r/1485542673-24387-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: call vm_munmap in munmap syscall instead of using open coded versionMike Rapoport
Patch series "userfaultfd: non-cooperative: better tracking for mapping changes", v2. These patches try to address issues I've encountered during integration of userfaultfd with CRIU. Previously added userfaultfd events for fork(), madvise() and mremap() unfortunately do not cover all possible changes to a process virtual memory layout required for uffd monitor. When one or more VMAs is removed from the process mm, the external uffd monitor has no way to detect those changes and will attempt to fill the removed regions with userfaultfd_copy. Another problematic event is the exit() of the process. Here again, the external uffd monitor will try to use userfaultfd_copy, although mm owning the memory has already gone. The first patch in the series is a minor cleanup and it's not strictly related to the rest of the series. The patches 2 and 3 below add UFFD_EVENT_UNMAP and UFFD_EVENT_EXIT to allow the uffd monitor track changes in the memory layout of a process. The patches 4 and 5 amend error codes returned by userfaultfd_copy to make the uffd monitor able to cope with races that might occur between delivery of unmap and exit events and outstanding userfaultfd_copy's. This patch (of 5): Commit dc0ef0df7b6a ("mm: make mmap_sem for write waits killable for mm syscalls") replaced call to vm_munmap in munmap syscall with open coded version to allow different waits on mmap_sem in munmap syscall and vm_munmap. Now both functions use down_write_killable, so we can restore the call to vm_munmap from the munmap system call. Link: http://lkml.kernel.org/r/1485542673-24387-2-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: convert remove_migration_pte() to use page_vma_mapped_walk()Kirill A. Shutemov
remove_migration_pte() also can easily be converted to page_vma_mapped_walk(). [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170129173858.45174-13-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: drop page_check_address{,_transhuge}Kirill A. Shutemov
All users are gone. Let's drop them. Link: http://lkml.kernel.org/r/20170129173858.45174-12-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: convert page_mapped_in_vma() to use page_vma_mapped_walk()Kirill A. Shutemov
For consistency, it worth converting all page_check_address() to page_vma_mapped_walk(), so we could drop the former. Link: http://lkml.kernel.org/r/20170129173858.45174-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, ksm: convert write_protect_page() to use page_vma_mapped_walk()Kirill A. Shutemov
For consistency, it worth converting all page_check_address() to page_vma_mapped_walk(), so we could drop the former. Link: http://lkml.kernel.org/r/20170129173858.45174-9-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: convert try_to_unmap_one() to use page_vma_mapped_walk()Kirill A. Shutemov
For consistency, it worth converting all page_check_address() to page_vma_mapped_walk(), so we could drop the former. It also makes freeze_page() as we walk though rmap only once. Link: http://lkml.kernel.org/r/20170129173858.45174-8-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: convert page_mkclean_one() to use page_vma_mapped_walk()Kirill A. Shutemov
For consistency, it worth converting all page_check_address() to page_vma_mapped_walk(), so we could drop the former. PMD handling here is future-proofing, we don't have users yet. ext4 with huge pages will be the first. Link: http://lkml.kernel.org/r/20170129173858.45174-7-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, rmap: check all VMAs that PTE-mapped THP can be part ofKirill A. Shutemov
Current rmap code can miss a VMA that maps PTE-mapped THP if the first suppage of the THP was unmapped from the VMA. We need to walk rmap for the whole range of offsets that THP covers, not only the first one. vma_address() also need to be corrected to check the range instead of the first subpage. Link: http://lkml.kernel.org/r/20170129173858.45174-6-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: fix handling PTE-mapped THPs in page_idle_clear_pte_refs()Kirill A. Shutemov
For PTE-mapped THP page_check_address_transhuge() is not adequate: it cannot find all relevant PTEs, only the first one.i Let's switch it to page_vma_mapped_walk(). I don't think it's subject for stable@: it's not fatal. Link: http://lkml.kernel.org/r/20170129173858.45174-5-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: fix handling PTE-mapped THPs in page_referenced()Kirill A. Shutemov
For PTE-mapped THP page_check_address_transhuge() is not adequate: it cannot find all relevant PTEs, only the first one. It means we can miss some references of the page and it can result in suboptimal decisions by vmscan. Let's switch it to page_vma_mapped_walk(). I don't think it's subject for stable@: it's not fatal. The only side effect is that THP can be swapped out when it shouldn't. Link: http://lkml.kernel.org/r/20170129173858.45174-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: introduce page_vma_mapped_walk()Kirill A. Shutemov
Introduce a new interface to check if a page is mapped into a vma. It aims to address shortcomings of page_check_address{,_transhuge}. Existing interface is not able to handle PTE-mapped THPs: it only finds the first PTE. The rest lefted unnoticed. page_vma_mapped_walk() iterates over all possible mapping of the page in the vma. Link: http://lkml.kernel.org/r/20170129173858.45174-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/hotplug: enable memory hotplug for non-lru movable pagesYisheng Xie
We had considered all of the non-lru pages as unmovable before commit bda807d44454 ("mm: migrate: support non-lru movable page migration"). But now some of non-lru pages like zsmalloc, virtio-balloon pages also become movable. So we can offline such blocks by using non-lru page migration. This patch straightforwardly adds non-lru migration code, which means adding non-lru related code to the functions which scan over pfn and collect pages to be migrated and isolate them before migration. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24HWPOISON: soft offlining for non-lru movable pageYisheng Xie
Extend soft offlining framework to support non-lru page, which already support migration after commit bda807d44454 ("mm: migrate: support non-lru movable page migration") When memory corrected errors occur on a non-lru movable page, we can choose to stop using it by migrating data onto another page and disable the original (maybe half-broken) one. Link: http://lkml.kernel.org/r/1485867981-16037-4-git-send-email-ysxie@foxmail.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Suggested-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm/migration: make isolate_movable_page() return int typeYisheng Xie
Patch series "HWPOISON: soft offlining for non-lru movable page", v6. After Minchan's commit bda807d44454 ("mm: migrate: support non-lru movable page migration"), some type of non-lru page like zsmalloc and virtio-balloon page also support migration. Therefore, we can: 1) soft offlining no-lru movable pages, which means when memory corrected errors occur on a non-lru movable page, we can stop to use it by migrating data onto another page and disable the original (maybe half-broken) one. 2) enable memory hotplug for non-lru movable pages, i.e. we may offline blocks, which include such pages, by using non-lru page migration. This patchset is heavily dependent on non-lru movable page migration. This patch (of 4): Change the return type of isolate_movable_page() from bool to int. It will return 0 when isolate movable page successfully, and return -EBUSY when it isolates failed. There is no functional change within this patch but prepare for later patch. [xieyisheng1@huawei.com: v6] Link: http://lkml.kernel.org/r/1486108770-630-2-git-send-email-xieyisheng1@huawei.com Link: http://lkml.kernel.org/r/1485867981-16037-2-git-send-email-ysxie@foxmail.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24z3fold: add kref refcountingVitaly Wool
With both coming and already present locking optimizations, introducing kref to reference-count z3fold objects is the right thing to do. Moreover, it makes buddied list no longer necessary, and allows for a simpler handling of headless pages. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170131214650.8ea78033d91ded233f552bc0@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24z3fold: use per-page spinlockVitaly Wool
Most of z3fold operations are in-page, such as modifying z3fold page header or moving z3fold objects within a page. Taking per-pool spinlock to protect per-page objects is therefore suboptimal, and the idea of having a per-page spinlock (or rwlock) has been around for some time. This patch implements spinlock-based per-page locking mechanism which is lightweight enough to normally fit ok into the z3fold header. Link: http://lkml.kernel.org/r/20170131214438.433e0a5fda908337b63206d3@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24z3fold: extend compaction functionVitaly Wool
z3fold_compact_page() currently only handles the situation when there's a single middle chunk within the z3fold page. However it may be worth it to move middle chunk closer to either first or last chunk, whichever is there, if the gap between them is big enough. This patch adds the relevant code, using BIG_CHUNK_GAP define as a threshold for middle chunk to be worth moving. Link: http://lkml.kernel.org/r/20170131214334.c4f3eac9a477af0fa9a22c46@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24z3fold: fix header size related issuesVitaly Wool
Currently the whole kernel build will be stopped if the size of struct z3fold_header is greater than the size of one chunk, which is 64 bytes by default. This patch instead defines the offset for z3fold objects as the size of the z3fold header in chunks. Fixed also are the calculation of num_free_chunks() and the address to move the middle chunk to in case of in-page compaction in z3fold_compact_page(). Link: http://lkml.kernel.org/r/20170131214057.d98677032bc7b1c6c59a80c9@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24z3fold: make pages_nr atomicVitaly Wool
Convert pages_nr per-pool counter to atomic64_t. Link: http://lkml.kernel.org/r/20170131213946.b828676ab17bbea42022c213@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: replace FAULT_FLAG_SIZE with parameter to huge_faultDave Jiang
Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has been somewhat painful with getting the flags set and removed at the correct locations. More than one kernel oops was introduced due to difficulties of getting the placement correctly. Remove the flag values and introduce an input parameter to huge_fault that indicates the size of the page entry. This makes the code easier to trace and should avoid the issues we see with the fault flags where removal of the flag was necessary in the fallback paths. Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, x86: add support for PUD-sized transparent hugepagesMatthew Wilcox
The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm,fs,dax: change ->pmd_fault to ->huge_faultDave Jiang
Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: use static global work_struct for draining per-cpu pagesMel Gorman
As suggested by Vlastimil Babka and Tejun Heo, this patch uses a static work_struct to co-ordinate the draining of per-cpu pages on the workqueue. Only one task can drain at a time but this is better than the previous scheme that allowed multiple tasks to send IPIs at a time. One consideration is whether parallel requests should synchronise against each other. This patch does not synchronise for a global drain as the common case for such callers is expected to be multiple parallel direct reclaimers competing for pages when the watermark is close to min. Draining the per-cpu list is unlikely to make much progress and serialising the drain is of dubious merit. Drains are synchonrised for callers such as memory hotplug and CMA that care about the drain being complete when the function returns. Link: http://lkml.kernel.org/r/20170125083038.rzb5f43nptmk7aed@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Suggested-by: Tejun Heo <tj@kernel.org> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: don't check cpuset allowed twice in fast-pathVlastimil Babka
Since commit 682a3385e773 ("mm, page_alloc: inline the fast path of the zonelist iterator") we replace a NULL nodemask with cpuset_current_mems_allowed in the fast path, so that get_page_from_freelist() filters nodes allowed by the cpuset via for_next_zone_zonelist_nodemask(). In that case it's pointless to additionaly check __cpuset_zone_allowed() in each iteration, which we can avoid by not adding ALLOC_CPUSET to alloc_flags in that scenario. This saves some cycles in the allocator fast path on systems with one or more non-root cpuset configured. In the slow path, ALLOC_CPUSET is reset according to __alloc_pages_slowpath(). Without configured cpusets, this code is disabled by a static key. Link: http://lkml.kernel.org/r/20170124150511.5710-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: remove redundant checks from alloc fastpathVlastimil Babka
The allocation fast path contains two similar checks for zoneref->zone being NULL, where zoneref points either to the first zone in the zonelist, or to the preferred zone. These can be NULL either due to empty zonelist, or no zone being compatible with given nodemask or task's cpuset. These checks are unnecessary, because the zonelist walks in first_zones_zonelist() and get_page_from_freelist() handle a NULL starting zoneref->zone or preferred_zoneref->zone safely. It's safe to fallback to __alloc_pages_slowpath() where we also have the check early enough. Link: http://lkml.kernel.org/r/20170124150511.5710-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: fix comments for mmap_init()seokhoon.yoon
mmap_init() is no longer associated with VMA slab. So fix it. Link: http://lkml.kernel.org/r/1485182601-9294-1-git-send-email-iamyooon@gmail.com Signed-off-by: seokhoon.yoon <iamyooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: only use per-cpu allocator for irq-safe requestsMel Gorman
Many workloads that allocate pages are not handling an interrupt at a time. As allocation requests may be from IRQ context, it's necessary to disable/enable IRQs for every page allocation. This cost is the bulk of the free path but also a significant percentage of the allocation path. This patch alters the locking and checks such that only irq-safe allocation requests use the per-cpu allocator. All others acquire the irq-safe zone->lock and allocate from the buddy allocator. It relies on disabling preemption to safely access the per-cpu structures. It could be slightly modified to avoid soft IRQs using it but it's not clear it's worthwhile. This modification may slow allocations from IRQ context slightly but the main gain from the per-cpu allocator is that it scales better for allocations from multiple contexts. There is an implicit assumption that intensive allocations from IRQ contexts on multiple CPUs from a single NUMA node are rare and that the fast majority of scaling issues are encountered in !IRQ contexts such as page faulting. It's worth noting that this patch is not required for a bulk page allocator but it significantly reduces the overhead. The following is results from a page allocator micro-benchmark. Only order-0 is interesting as higher orders do not use the per-cpu allocator 4.10.0-rc2 4.10.0-rc2 vanilla irqsafe-v1r5 Amean alloc-odr0-1 287.15 ( 0.00%) 219.00 ( 23.73%) Amean alloc-odr0-2 221.23 ( 0.00%) 183.23 ( 17.18%) Amean alloc-odr0-4 187.00 ( 0.00%) 151.38 ( 19.05%) Amean alloc-odr0-8 167.54 ( 0.00%) 132.77 ( 20.75%) Amean alloc-odr0-16 156.00 ( 0.00%) 123.00 ( 21.15%) Amean alloc-odr0-32 149.00 ( 0.00%) 118.31 ( 20.60%) Amean alloc-odr0-64 138.77 ( 0.00%) 116.00 ( 16.41%) Amean alloc-odr0-128 145.00 ( 0.00%) 118.00 ( 18.62%) Amean alloc-odr0-256 136.15 ( 0.00%) 125.00 ( 8.19%) Amean alloc-odr0-512 147.92 ( 0.00%) 121.77 ( 17.68%) Amean alloc-odr0-1024 147.23 ( 0.00%) 126.15 ( 14.32%) Amean alloc-odr0-2048 155.15 ( 0.00%) 129.92 ( 16.26%) Amean alloc-odr0-4096 164.00 ( 0.00%) 136.77 ( 16.60%) Amean alloc-odr0-8192 166.92 ( 0.00%) 138.08 ( 17.28%) Amean alloc-odr0-16384 159.00 ( 0.00%) 138.00 ( 13.21%) Amean free-odr0-1 165.00 ( 0.00%) 89.00 ( 46.06%) Amean free-odr0-2 113.00 ( 0.00%) 63.00 ( 44.25%) Amean free-odr0-4 99.00 ( 0.00%) 54.00 ( 45.45%) Amean free-odr0-8 88.00 ( 0.00%) 47.38 ( 46.15%) Amean free-odr0-16 83.00 ( 0.00%) 46.00 ( 44.58%) Amean free-odr0-32 80.00 ( 0.00%) 44.38 ( 44.52%) Amean free-odr0-64 72.62 ( 0.00%) 43.00 ( 40.78%) Amean free-odr0-128 78.00 ( 0.00%) 42.00 ( 46.15%) Amean free-odr0-256 80.46 ( 0.00%) 57.00 ( 29.16%) Amean free-odr0-512 96.38 ( 0.00%) 64.69 ( 32.88%) Amean free-odr0-1024 107.31 ( 0.00%) 72.54 ( 32.40%) Amean free-odr0-2048 108.92 ( 0.00%) 78.08 ( 28.32%) Amean free-odr0-4096 113.38 ( 0.00%) 82.23 ( 27.48%) Amean free-odr0-8192 112.08 ( 0.00%) 82.85 ( 26.08%) Amean free-odr0-16384 110.38 ( 0.00%) 81.92 ( 25.78%) Amean total-odr0-1 452.15 ( 0.00%) 308.00 ( 31.88%) Amean total-odr0-2 334.23 ( 0.00%) 246.23 ( 26.33%) Amean total-odr0-4 286.00 ( 0.00%) 205.38 ( 28.19%) Amean total-odr0-8 255.54 ( 0.00%) 180.15 ( 29.50%) Amean total-odr0-16 239.00 ( 0.00%) 169.00 ( 29.29%) Amean total-odr0-32 229.00 ( 0.00%) 162.69 ( 28.96%) Amean total-odr0-64 211.38 ( 0.00%) 159.00 ( 24.78%) Amean total-odr0-128 223.00 ( 0.00%) 160.00 ( 28.25%) Amean total-odr0-256 216.62 ( 0.00%) 182.00 ( 15.98%) Amean total-odr0-512 244.31 ( 0.00%) 186.46 ( 23.68%) Amean total-odr0-1024 254.54 ( 0.00%) 198.69 ( 21.94%) Amean total-odr0-2048 264.08 ( 0.00%) 208.00 ( 21.24%) Amean total-odr0-4096 277.38 ( 0.00%) 219.00 ( 21.05%) Amean total-odr0-8192 279.00 ( 0.00%) 220.92 ( 20.82%) Amean total-odr0-16384 269.38 ( 0.00%) 219.92 ( 18.36%) This is the alloc, free and total overhead of allocating order-0 pages in batches of 1 page up to 16384 pages. Avoiding disabling/enabling overhead massively reduces overhead. Alloc overhead is roughly reduced by 14-20% in most cases. The free path is reduced by 26-46% and the total reduction is significant. Many users require zeroing of pages from the page allocator which is the vast cost of allocation. Hence, the impact on a basic page faulting benchmark is not that significant 4.10.0-rc2 4.10.0-rc2 vanilla irqsafe-v1r5 Hmean page_test 656632.98 ( 0.00%) 675536.13 ( 2.88%) Hmean brk_test 3845502.67 ( 0.00%) 3867186.94 ( 0.56%) Stddev page_test 10543.29 ( 0.00%) 4104.07 ( 61.07%) Stddev brk_test 33472.36 ( 0.00%) 15538.39 ( 53.58%) CoeffVar page_test 1.61 ( 0.00%) 0.61 ( 62.15%) CoeffVar brk_test 0.87 ( 0.00%) 0.40 ( 53.84%) Max page_test 666513.33 ( 0.00%) 678640.00 ( 1.82%) Max brk_test 3882800.00 ( 0.00%) 3887008.66 ( 0.11%) This is from aim9 and the most notable outcome is that fault variability is reduced by the patch. The headline improvement is small as the overall fault cost, zeroing, page table insertion etc dominate relative to disabling/enabling IRQs in the per-cpu allocator. Similarly, little benefit was seen on networking benchmarks both localhost and between physical server/clients where other costs dominate. It's possible that this will only be noticable on very high speed networks. Jesper Dangaard Brouer independently tested this with a separate microbenchmark from https://github.com/netoptimizer/prototype-kernel/tree/master/kernel/mm/bench Micro-benchmarked with [1] page_bench02: modprobe page_bench02 page_order=0 run_flags=$((2#010)) loops=$((10**8)); \ rmmod page_bench02 ; dmesg --notime | tail -n 4 Compared to baseline: 213 cycles(tsc) 53.417 ns - against this : 184 cycles(tsc) 46.056 ns - Saving : -29 cycles - Very close to expected 27 cycles saving [see below [2]] Micro benchmarking via time_bench_sample[3], we get the cost of these operations: time_bench: Type:for_loop Per elem: 0 cycles(tsc) 0.232 ns (step:0) time_bench: Type:spin_lock_unlock Per elem: 33 cycles(tsc) 8.334 ns (step:0) time_bench: Type:spin_lock_unlock_irqsave Per elem: 62 cycles(tsc) 15.607 ns (step:0) time_bench: Type:irqsave_before_lock Per elem: 57 cycles(tsc) 14.344 ns (step:0) time_bench: Type:spin_lock_unlock_irq Per elem: 34 cycles(tsc) 8.560 ns (step:0) time_bench: Type:simple_irq_disable_before_lock Per elem: 37 cycles(tsc) 9.289 ns (step:0) time_bench: Type:local_BH_disable_enable Per elem: 19 cycles(tsc) 4.920 ns (step:0) time_bench: Type:local_IRQ_disable_enable Per elem: 7 cycles(tsc) 1.864 ns (step:0) time_bench: Type:local_irq_save_restore Per elem: 38 cycles(tsc) 9.665 ns (step:0) [Mel's patch removes a ^^^^^^^^^^^^^^^^] ^^^^^^^^^ expected saving - preempt cost time_bench: Type:preempt_disable_enable Per elem: 11 cycles(tsc) 2.794 ns (step:0) [adds a preempt ^^^^^^^^^^^^^^^^^^^^^^] ^^^^^^^^^ adds this cost time_bench: Type:funcion_call_cost Per elem: 6 cycles(tsc) 1.689 ns (step:0) time_bench: Type:func_ptr_call_cost Per elem: 11 cycles(tsc) 2.767 ns (step:0) time_bench: Type:page_alloc_put Per elem: 211 cycles(tsc) 52.803 ns (step:0) Thus, expected improvement is: 38-11 = 27 cycles. [mgorman@techsingularity.net: s/preempt_enable_no_resched/preempt_enable/] Link: http://lkml.kernel.org/r/20170208143128.25ahymqlyspjcixu@techsingularity.net Link: http://lkml.kernel.org/r/20170123153906.3122-5-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: do not depend on cpu hotplug locks inside the allocatorMichal Hocko
Dmitry has reported the following lockdep splat lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3753 __mutex_lock_common kernel/locking/mutex.c:521 [inline] mutex_lock_nested+0x24e/0xff0 kernel/locking/mutex.c:621 pcpu_alloc+0xbda/0x1280 mm/percpu.c:896 __alloc_percpu+0x24/0x30 mm/percpu.c:1075 smpcfd_prepare_cpu+0x73/0xd0 kernel/smp.c:44 cpuhp_invoke_callback+0x254/0x1480 kernel/cpu.c:136 cpuhp_up_callbacks+0x81/0x2a0 kernel/cpu.c:493 _cpu_up+0x1e3/0x2a0 kernel/cpu.c:1057 do_cpu_up+0x73/0xa0 kernel/cpu.c:1087 cpu_up+0x18/0x20 kernel/cpu.c:1095 smp_init+0xe9/0xee kernel/smp.c:564 kernel_init_freeable+0x439/0x690 init/main.c:1010 kernel_init+0x13/0x180 init/main.c:941 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 cpu_hotplug_begin cpu_hotplug.lock pcpu_alloc pcpu_alloc_mutex get_online_cpus+0x62/0x90 kernel/cpu.c:248 drain_all_pages+0xf8/0x710 mm/page_alloc.c:2385 __alloc_pages_direct_reclaim mm/page_alloc.c:3440 [inline] __alloc_pages_slowpath+0x8fd/0x2370 mm/page_alloc.c:3778 __alloc_pages_nodemask+0x8f5/0xc60 mm/page_alloc.c:3980 __alloc_pages include/linux/gfp.h:426 [inline] __alloc_pages_node include/linux/gfp.h:439 [inline] alloc_pages_node include/linux/gfp.h:453 [inline] pcpu_alloc_pages mm/percpu-vm.c:93 [inline] pcpu_populate_chunk+0x1e1/0x900 mm/percpu-vm.c:282 pcpu_alloc+0xe01/0x1280 mm/percpu.c:998 __alloc_percpu_gfp+0x27/0x30 mm/percpu.c:1062 bpf_array_alloc_percpu kernel/bpf/arraymap.c:34 [inline] array_map_alloc+0x532/0x710 kernel/bpf/arraymap.c:99 find_and_alloc_map kernel/bpf/syscall.c:34 [inline] map_create kernel/bpf/syscall.c:188 [inline] SYSC_bpf kernel/bpf/syscall.c:870 [inline] SyS_bpf+0xd64/0x2500 kernel/bpf/syscall.c:827 entry_SYSCALL_64_fastpath+0x1f/0xc2 pcpu_alloc pcpu_alloc_mutex drain_all_pages get_online_cpus cpu_hotplug.lock cpu_hotplug_begin+0x206/0x2e0 kernel/cpu.c:304 _cpu_up+0xca/0x2a0 kernel/cpu.c:1011 do_cpu_up+0x73/0xa0 kernel/cpu.c:1087 cpu_up+0x18/0x20 kernel/cpu.c:1095 smp_init+0xe9/0xee kernel/smp.c:564 kernel_init_freeable+0x439/0x690 init/main.c:1010 kernel_init+0x13/0x180 init/main.c:941 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 cpu_hotplug_begin cpu_hotplug.lock Pulling cpu hotplug locks inside the page allocator is just too dangerous. Let's remove the dependency by dropping get_online_cpus() from drain_all_pages. This is not so simple though because now we do not have a protection against cpu hotplug which means 2 things: - the work item might be executed on a different cpu in worker from unbound pool so it doesn't run on pinned on the cpu - we have to make sure that we do not race with page_alloc_cpu_dead calling drain_pages_zone Disabling preemption in drain_local_pages_wq will solve the first problem drain_local_pages will determine its local CPU from the WQ context which will be stable after that point, page_alloc_cpu_dead is pinned to the CPU already. The later condition is achieved by disabling IRQs in drain_pages_zone. Fixes: mm, page_alloc: drain per-cpu pages from workqueue context Link: http://lkml.kernel.org/r/20170207201950.20482-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: drain per-cpu pages from workqueue contextMel Gorman
The per-cpu page allocator can be drained immediately via drain_all_pages() which sends IPIs to every CPU. In the next patch, the per-cpu allocator will only be used for interrupt-safe allocations which prevents draining it from IPI context. This patch uses workqueues to drain the per-cpu lists instead. This is slower but no slowdown during intensive reclaim was measured and the paths that use drain_all_pages() are not that sensitive to performance. This is particularly true as the path would only be triggered when reclaim is failing. It also makes a some sense to avoid storming a machine with IPIs when it's under memory pressure. Arguably, it should be further adjusted so that only one caller at a time is draining pages but it's beyond the scope of the current patch. Link: http://lkml.kernel.org/r/20170123153906.3122-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: split alloc_pages_nodemask()Mel Gorman
alloc_pages_nodemask does a number of preperation steps that determine what zones can be used for the allocation depending on a variety of factors. This is fine but a hypothetical caller that wanted multiple order-0 pages has to do the preparation steps multiple times. This patch structures __alloc_pages_nodemask such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change. Link: http://lkml.kernel.org/r/20170123153906.3122-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, page_alloc: split buffered_rmqueue()Mel Gorman
Patch series "Use per-cpu allocator for !irq requests and prepare for a bulk allocator", v5. This series is motivated by a conversation led by Jesper Dangaard Brouer at the last LSF/MM proposing a generic page pool for DMA-coherent pages. Part of his motivation was due to the overhead of allocating multiple order-0 that led some drivers to use high-order allocations and splitting them. This is very slow in some cases. The first two patches in this series restructure the page allocator such that it is relatively easy to introduce an order-0 bulk page allocator. A patch exists to do that and has been handed over to Jesper until an in-kernel users is created. The third patch prevents the per-cpu allocator being drained from IPI context as that can potentially corrupt the list after patch four is merged. The final patch alters the per-cpu alloctor to make it exclusive to !irq requests. This cuts allocation/free overhead by roughly 30%. Performance tests from both Jesper and me are included in the patch. This patch (of 4): buffered_rmqueue removes a page from a given zone and uses the per-cpu list for order-0. This is fine but a hypothetical caller that wanted multiple order-0 pages has to disable/reenable interrupts multiple times. This patch structures buffere_rmqueue such that it's relatively easy to build a bulk order-0 page allocator. There is no functional change. [mgorman@techsingularity.net: failed per-cpu refill may blow up] Link: http://lkml.kernel.org/r/20170124112723.mshmgwq2ihxku2um@techsingularity.net Link: http://lkml.kernel.org/r/20170123153906.3122-2-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: vmscan: move dirty pages out of the way until they're flushedJohannes Weiner
We noticed a performance regression when moving hadoop workloads from 3.10 kernels to 4.0 and 4.6. This is accompanied by increased pageout activity initiated by kswapd as well as frequent bursts of allocation stalls and direct reclaim scans. Even lowering the dirty ratios to the equivalent of less than 1% of memory would not eliminate the issue, suggesting that dirty pages concentrate where the scanner is looking. This can be traced back to recent efforts of thrash avoidance. Where 3.10 would not detect refaulting pages and continuously supply clean cache to the inactive list, a thrashing workload on 4.0+ will detect and activate refaulting pages right away, distilling used-once pages on the inactive list much more effectively. This is by design, and it makes sense for clean cache. But for the most part our workload's cache faults are refaults and its use-once cache is from streaming writes. We end up with most of the inactive list dirty, and we don't go after the active cache as long as we have use-once pages around. But waiting for writes to avoid reclaiming clean cache that *might* refault is a bad trade-off. Even if the refaults happen, reads are faster than writes. Before getting bogged down on writeback, reclaim should first look at *all* cache in the system, even active cache. To accomplish this, activate pages that are dirty or under writeback when they reach the end of the inactive LRU. The pages are marked for immediate reclaim, meaning they'll get moved back to the inactive LRU tail as soon as they're written back and become reclaimable. But in the meantime, by reducing the inactive list to only immediately reclaimable pages, we allow the scanner to deactivate and refill the inactive list with clean cache from the active list tail to guarantee forward progress. [hannes@cmpxchg.org: update comment] Link: http://lkml.kernel.org/r/20170202191957.22872-8-hannes@cmpxchg.org Link: http://lkml.kernel.org/r/20170123181641.23938-6-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm: vmscan: only write dirty pages that the scanner has seen twiceJohannes Weiner
Dirty pages can easily reach the end of the LRU while there are still clean pages to reclaim around. Don't let kswapd write them back just because there are a lot of them. It costs more CPU to find the clean pages, but that's almost certainly better than to disrupt writeback from the flushers with LRU-order single-page writes from reclaim. And the flushers have been woken up by that point, so we spend IO capacity on flushing and CPU capacity on finding the clean cache. Only start writing dirty pages if they have cycled around the LRU twice now and STILL haven't been queued on the IO device. It's possible that the dirty pages are so sparsely distributed across different bdis, inodes, memory cgroups, that the flushers take forever to get to the ones we want reclaimed. Once we see them twice on the LRU, we know that's the quicker way to find them, so do LRU writeback. Link: http://lkml.kernel.org/r/20170123181641.23938-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>