| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "mm: Randomize free memory", v10.
This patch (of 3):
Randomization of the page allocator improves the average utilization of
a direct-mapped memory-side-cache. Memory side caching is a platform
capability that Linux has been previously exposed to in HPC
(high-performance computing) environments on specialty platforms. In
that instance it was a smaller pool of high-bandwidth-memory relative to
higher-capacity / lower-bandwidth DRAM. Now, this capability is going
to be found on general purpose server platforms where DRAM is a cache in
front of higher latency persistent memory [1].
Robert offered an explanation of the state of the art of Linux
interactions with memory-side-caches [2], and I copy it here:
It's been a problem in the HPC space:
http://www.nersc.gov/research-and-development/knl-cache-mode-performance-coe/
A kernel module called zonesort is available to try to help:
https://software.intel.com/en-us/articles/xeon-phi-software
and this abandoned patch series proposed that for the kernel:
https://lkml.kernel.org/r/20170823100205.17311-1-lukasz.daniluk@intel.com
Dan's patch series doesn't attempt to ensure buffers won't conflict, but
also reduces the chance that the buffers will. This will make performance
more consistent, albeit slower than "optimal" (which is near impossible
to attain in a general-purpose kernel). That's better than forcing
users to deploy remedies like:
"To eliminate this gradual degradation, we have added a Stream
measurement to the Node Health Check that follows each job;
nodes are rebooted whenever their measured memory bandwidth
falls below 300 GB/s."
A replacement for zonesort was merged upstream in commit cc9aec03e58f
("x86/numa_emulation: Introduce uniform split capability"). With this
numa_emulation capability, memory can be split into cache sized
("near-memory" sized) numa nodes. A bind operation to such a node, and
disabling workloads on other nodes, enables full cache performance.
However, once the workload exceeds the cache size then cache conflicts
are unavoidable. While HPC environments might be able to tolerate
time-scheduling of cache sized workloads, for general purpose server
platforms, the oversubscribed cache case will be the common case.
The worst case scenario is that a server system owner benchmarks a
workload at boot with an un-contended cache only to see that performance
degrade over time, even below the average cache performance due to
excessive conflicts. Randomization clips the peaks and fills in the
valleys of cache utilization to yield steady average performance.
Here are some performance impact details of the patches:
1/ An Intel internal synthetic memory bandwidth measurement tool, saw a
3X speedup in a contrived case that tries to force cache conflicts.
The contrived cased used the numa_emulation capability to force an
instance of the benchmark to be run in two of the near-memory sized
numa nodes. If both instances were placed on the same emulated they
would fit and cause zero conflicts. While on separate emulated nodes
without randomization they underutilized the cache and conflicted
unnecessarily due to the in-order allocation per node.
2/ A well known Java server application benchmark was run with a heap
size that exceeded cache size by 3X. The cache conflict rate was 8%
for the first run and degraded to 21% after page allocator aging. With
randomization enabled the rate levelled out at 11%.
3/ A MongoDB workload did not observe measurable difference in
cache-conflict rates, but the overall throughput dropped by 7% with
randomization in one case.
4/ Mel Gorman ran his suite of performance workloads with randomization
enabled on platforms without a memory-side-cache and saw a mix of some
improvements and some losses [3].
While there is potentially significant improvement for applications that
depend on low latency access across a wide working-set, the performance
may be negligible to negative for other workloads. For this reason the
shuffle capability defaults to off unless a direct-mapped
memory-side-cache is detected. Even then, the page_alloc.shuffle=0
parameter can be specified to disable the randomization on those systems.
Outside of memory-side-cache utilization concerns there is potentially
security benefit from randomization. Some data exfiltration and
return-oriented-programming attacks rely on the ability to infer the
location of sensitive data objects. The kernel page allocator, especially
early in system boot, has predictable first-in-first out behavior for
physical pages. Pages are freed in physical address order when first
onlined.
Quoting Kees:
"While we already have a base-address randomization
(CONFIG_RANDOMIZE_MEMORY), attacks against the same hardware and
memory layouts would certainly be using the predictability of
allocation ordering (i.e. for attacks where the base address isn't
important: only the relative positions between allocated memory).
This is common in lots of heap-style attacks. They try to gain
control over ordering by spraying allocations, etc.
I'd really like to see this because it gives us something similar
to CONFIG_SLAB_FREELIST_RANDOM but for the page allocator."
While SLAB_FREELIST_RANDOM reduces the predictability of some local slab
caches it leaves vast bulk of memory to be predictably in order allocated.
However, it should be noted, the concrete security benefits are hard to
quantify, and no known CVE is mitigated by this randomization.
Introduce shuffle_free_memory(), and its helper shuffle_zone(), to perform
a Fisher-Yates shuffle of the page allocator 'free_area' lists when they
are initially populated with free memory at boot and at hotplug time. Do
this based on either the presence of a page_alloc.shuffle=Y command line
parameter, or autodetection of a memory-side-cache (to be added in a
follow-on patch).
The shuffling is done in terms of CONFIG_SHUFFLE_PAGE_ORDER sized free
pages where the default CONFIG_SHUFFLE_PAGE_ORDER is MAX_ORDER-1 i.e. 10,
4MB this trades off randomization granularity for time spent shuffling.
MAX_ORDER-1 was chosen to be minimally invasive to the page allocator
while still showing memory-side cache behavior improvements, and the
expectation that the security implications of finer granularity
randomization is mitigated by CONFIG_SLAB_FREELIST_RANDOM. The
performance impact of the shuffling appears to be in the noise compared to
other memory initialization work.
This initial randomization can be undone over time so a follow-on patch is
introduced to inject entropy on page free decisions. It is reasonable to
ask if the page free entropy is sufficient, but it is not enough due to
the in-order initial freeing of pages. At the start of that process
putting page1 in front or behind page0 still keeps them close together,
page2 is still near page1 and has a high chance of being adjacent. As
more pages are added ordering diversity improves, but there is still high
page locality for the low address pages and this leads to no significant
impact to the cache conflict rate.
[1]: https://itpeernetwork.intel.com/intel-optane-dc-persistent-memory-operating-modes/
[2]: https://lkml.kernel.org/r/AT5PR8401MB1169D656C8B5E121752FC0F8AB120@AT5PR8401MB1169.NAMPRD84.PROD.OUTLOOK.COM
[3]: https://lkml.org/lkml/2018/10/12/309
[dan.j.williams@intel.com: fix shuffle enable]
Link: http://lkml.kernel.org/r/154943713038.3858443.4125180191382062871.stgit@dwillia2-desk3.amr.corp.intel.com
[cai@lca.pw: fix SHUFFLE_PAGE_ALLOCATOR help texts]
Link: http://lkml.kernel.org/r/20190425201300.75650-1-cai@lca.pw
Link: http://lkml.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
vmap_lazy_nr variable has atomic_t type that is 4 bytes integer value on
both 32 and 64 bit systems. lazy_max_pages() deals with "unsigned long"
that is 8 bytes on 64 bit system, thus vmap_lazy_nr should be 8 bytes on
64 bit as well.
Link: http://lkml.kernel.org/r/20190131162452.25879-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Joel Fernandes <joelaf@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 763b218ddfaf ("mm: add preempt points into __purge_vmap_area_lazy()")
introduced some preempt points, one of those is making an allocation
more prioritized over lazy free of vmap areas.
Prioritizing an allocation over freeing does not work well all the time,
i.e. it should be rather a compromise.
1) Number of lazy pages directly influences the busy list length thus
on operations like: allocation, lookup, unmap, remove, etc.
2) Under heavy stress of vmalloc subsystem I run into a situation when
memory usage gets increased hitting out_of_memory -> panic state due to
completely blocking of logic that frees vmap areas in the
__purge_vmap_area_lazy() function.
Establish a threshold passing which the freeing is prioritized back over
allocation creating a balance between each other.
Using vmalloc test driver in "stress mode", i.e. When all available
test cases are run simultaneously on all online CPUs applying a
pressure on the vmalloc subsystem, my HiKey 960 board runs out of
memory due to the fact that __purge_vmap_area_lazy() logic simply is
not able to free pages in time.
How I run it:
1) You should build your kernel with CONFIG_TEST_VMALLOC=m
2) ./tools/testing/selftests/vm/test_vmalloc.sh stress
During this test "vmap_lazy_nr" pages will go far beyond acceptable
lazy_max_pages() threshold, that will lead to enormous busy list size
and other problems including allocation time and so on.
Link: http://lkml.kernel.org/r/20190124115648.9433-3-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 0139aa7b7fa ("mm: rename _count, field of the struct page, to
_refcount") left out a couple of references to the old field name. Fix
that.
Link: http://lkml.kernel.org/r/cedf87b02eb8a6b3eac57e8e91da53fb15c3c44c.1556537475.git.baruch@tkos.co.il
Fixes: 0139aa7b7fa ("mm: rename _count, field of the struct page, to _refcount")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc updates from Andrew Morton:
- a few misc things and hotfixes
- ocfs2
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits)
kernel/memremap.c: remove the unused device_private_entry_fault() export
mm: delete find_get_entries_tag
mm/huge_memory.c: make __thp_get_unmapped_area static
mm/mprotect.c: fix compilation warning because of unused 'mm' variable
mm/page-writeback: introduce tracepoint for wait_on_page_writeback()
mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags
mm/Kconfig: update "Memory Model" help text
mm/vmscan.c: don't disable irq again when count pgrefill for memcg
mm: memblock: make keeping memblock memory opt-in rather than opt-out
hugetlbfs: always use address space in inode for resv_map pointer
mm/z3fold.c: support page migration
mm/z3fold.c: add structure for buddy handles
mm/z3fold.c: improve compression by extending search
mm/z3fold.c: introduce helper functions
mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist
mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig
mm/vmscan.c: simplify shrink_inactive_list()
fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback
xen/privcmd-buf.c: convert to use vm_map_pages_zero()
xen/gntdev.c: convert to use vm_map_pages()
...
|
|
I removed the only user of this and hadn't noticed it was now unused.
Link: http://lkml.kernel.org/r/20190430152929.21813-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__thp_get_unmapped_area is only used in mm/huge_memory.c. Make it static.
Tested by building and booting the kernel.
Link: http://lkml.kernel.org/r/20190504102353.GA22525@bharath12345-Inspiron-5559
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since 0cbe3e26abe0 ("mm: update ptep_modify_prot_start/commit to take
vm_area_struct as arg") the only place that uses the local 'mm' variable
in change_pte_range() is the call to set_pte_at().
Many architectures define set_pte_at() as macro that does not use the 'mm'
parameter, which generates the following compilation warning:
CC mm/mprotect.o
mm/mprotect.c: In function 'change_pte_range':
mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable]
struct mm_struct *mm = vma->vm_mm;
^~
Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm'
variable in change_pte_range().
[liu.song.a23@gmail.com: fix missed conversions]
Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink: http://lkml.kernel.org/r/1557305432-4940-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recently there have been some hung tasks on our server due to
wait_on_page_writeback(), and we want to know the details of this
PG_writeback, i.e. this page is writing back to which device. But it is
not so convenient to get the details.
I think it would be better to introduce a tracepoint for diagnosing the
writeback details.
Link: http://lkml.kernel.org/r/1556274402-19018-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The help describing the memory model selection is outdated. It still says
that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over
SPARSEMEM.
Update the help text for the relevant options:
* add a generic help for the "Memory Model" prompt
* add description for FLATMEM
* reduce the description of DISCONTIGMEM and add a deprecation note
* prefer SPARSEMEM over DISCONTIGMEM
Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can use __count_memcg_events() directly because this callsite is alreay
protected by spin_lock_irq().
Link: http://lkml.kernel.org/r/1556093494-30798-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most architectures do not need the memblock memory after the page
allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the
arch Kconfig.
Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the
logic makes it clear which architectures actually use memblock after
system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK
to the architectures that are still missing that option.
Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Continuing discussion about 58b6e5e8f1ad ("hugetlbfs: fix memory leak for
resv_map") brought up the issue that inode->i_mapping may not point to the
address space embedded within the inode at inode eviction time. The
hugetlbfs truncate routine handles this by explicitly using inode->i_data.
However, code cleaning up the resv_map will still use the address space
pointed to by inode->i_mapping. Luckily, private_data is NULL for address
spaces in all such cases today but, there is no guarantee this will
continue.
Change all hugetlbfs code getting a resv_map pointer to explicitly get it
from the address space embedded within the inode. In addition, add more
comments in the code to indicate why this is being done.
Link: http://lkml.kernel.org/r/20190419204435.16984-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that we are not using page address in handles directly, we can make
z3fold pages movable to decrease the memory fragmentation z3fold may
create over time.
This patch starts advertising non-headless z3fold pages as movable and
uses the existing kernel infrastructure to implement moving of such pages
per memory management subsystem's request. It thus implements 3 required
callbacks for page migration:
* isolation callback: z3fold_page_isolate(): try to isolate the page by
removing it from all lists. Pages scheduled for some activity and
mapped pages will not be isolated. Return true if isolation was
successful or false otherwise
* migration callback: z3fold_page_migrate(): re-check critical
conditions and migrate page contents to the new page provided by the
memory subsystem. Returns 0 on success or negative error code otherwise
* putback callback: z3fold_page_putback(): put back the page if
z3fold_page_migrate() for it failed permanently (i. e. not with
-EAGAIN code).
[lkp@intel.com: z3fold_page_isolate() can be static]
Link: http://lkml.kernel.org/r/20190419130924.GA161478@ivb42
Link: http://lkml.kernel.org/r/20190417103922.31253da5c366c4ebe0419cfc@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For z3fold to be able to move its pages per request of the memory
subsystem, it should not use direct object addresses in handles. Instead,
it will create abstract handles (3 per page) which will contain pointers
to z3fold objects. Thus, it will be possible to change these pointers
when z3fold page is moved.
Link: http://lkml.kernel.org/r/20190417103826.484eaf18c1294d682769880f@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current z3fold implementation only searches this CPU's page lists for
a fitting page to put a new object into. This patch adds quick search for
very well fitting pages (i. e. those having exactly the required number
of free space) on other CPUs too, before allocating a new page for that
object.
Link: http://lkml.kernel.org/r/20190417103733.72ae81abe1552397c95a008e@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "z3fold: support page migration", v2.
This patchset implements page migration support and slightly better buddy
search. To implement page migration support, z3fold has to move away from
the current scheme of handle encoding. i. e. stop encoding page address
in handles. Instead, a small per-page structure is created which will
contain actual addresses for z3fold objects, while pointers to fields of
that structure will be used as handles.
Thus, it will be possible to change the underlying addresses to reflect
page migration.
To support migration itself, 3 callbacks will be implemented:
1: isolation callback: z3fold_page_isolate(): try to isolate the page
by removing it from all lists. Pages scheduled for some activity and
mapped pages will not be isolated. Return true if isolation was
successful or false otherwise
2: migration callback: z3fold_page_migrate(): re-check critical
conditions and migrate page contents to the new page provided by the
system. Returns 0 on success or negative error code otherwise
3: putback callback: z3fold_page_putback(): put back the page if
z3fold_page_migrate() for it failed permanently (i. e. not with
-EAGAIN code).
To make sure an isolated page doesn't get freed, its kref is incremented
in z3fold_page_isolate() and decremented during post-migration compaction,
if migration was successful, or by z3fold_page_putback() in the other
case.
Since the new handle encoding scheme implies slight memory consumption
increase, better buddy search (which decreases memory consumption) is
included in this patchset.
This patch (of 4):
Introduce a separate helper function for object allocation, as well as 2
smaller helpers to add a buddy to the list and to get a pointer to the
pool from the z3fold header. No functional changes here.
Link: http://lkml.kernel.org/r/20190417103633.a4bb770b5bf0fb7e43ce1666@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because rmqueue_pcplist() is only called when order is 0, we don't need to
use order as a parameter.
Link: http://lkml.kernel.org/r/1555591709-11744-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add 2 new Kconfig variables that are not used by anyone. I check that
various make ARCH=somearch allmodconfig do work and do not complain. This
new Kconfig needs to be added first so that device drivers that depend on
HMM can be updated.
Once drivers are updated then I can update the HMM Kconfig to depend on
this new Kconfig in a followup patch.
This is about solving Kconfig for HMM given that device driver are
going through their own tree we want to avoid changing them from the mm
tree. So plan is:
1 - Kernel release N add the new Kconfig to mm/Kconfig (this patch)
2 - Kernel release N+1 update driver to depend on new Kconfig ie
stop using ARCH_HASH_HMM and start using ARCH_HAS_HMM_MIRROR
and ARCH_HAS_HMM_DEVICE (one or the other or both depending
on the driver)
3 - Kernel release N+2 remove ARCH_HASH_HMM and do final Kconfig
update in mm/Kconfig
Link: http://lkml.kernel.org/r/20190417211141.17580-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This merges together duplicated patterns of code. Also, replace
count_memcg_events() with its irq-careless namesake, because they are
already called in interrupts disabled context.
Link: http://lkml.kernel.org/r/2ece1df4-2989-bc9b-6172-61e9fdde5bfd@virtuozzo.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5.
This patch (of 5):
Previouly drivers have their own way of mapping range of kernel
pages/memory into user vma and this was done by invoking vm_insert_page()
within a loop.
As this pattern is common across different drivers, it can be generalized
by creating new functions and using them across the drivers.
vm_map_pages() is the API which can be used to map kernel memory/pages in
drivers which have considered vm_pgoff
vm_map_pages_zero() is the API which can be used to map a range of kernel
memory/pages in drivers which have not considered vm_pgoff. vm_pgoff is
passed as default 0 for those drivers.
We _could_ then at a later "fix" these drivers which are using
vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting
simply by removing the _zero suffix on the function name and if that
causes regressions, it gives us an easy way to revert.
Tested on Rockchip hardware and display is working, including talking to
Lima via prime.
Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Suggested-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Link: http://lkml.kernel.org/r/c3385916-e4d4-37d3-b330-e6b7dff83a52@samsung.com
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the default overcommit==guess we occasionally run into mmap
rejections despite plenty of memory that would get dropped under
pressure but just isn't accounted reclaimable. One example of this is
dying cgroups pinned by some page cache. A previous case was auxiliary
path name memory associated with dentries; we have since annotated
those allocations to avoid overcommit failures (see d79f7aa496fc ("mm:
treat indirectly reclaimable memory as free in overcommit logic")).
But trying to classify all allocated memory reliably as reclaimable
and unreclaimable is a bit of a fool's errand. There could be a myriad
of dependencies that constantly change with kernel versions.
It becomes even more questionable of an effort when considering how
this estimate of available memory is used: it's not compared to the
system-wide allocated virtual memory in any way. It's not even
compared to the allocating process's address space. It's compared to
the single allocation request at hand!
So we have an elaborate left-hand side of the equation that tries to
assess the exact breathing room the system has available down to a
page - and then compare it to an isolated allocation request with no
additional context. We could fail an allocation of N bytes, but for
two allocations of N/2 bytes we'd do this elaborate dance twice in a
row and then still let N bytes of virtual memory through. This doesn't
make a whole lot of sense.
Let's take a step back and look at the actual goal of the
heuristic. From the documentation:
Heuristic overcommit handling. Obvious overcommits of address
space are refused. Used for a typical system. It ensures a
seriously wild allocation fails while allowing overcommit to
reduce swap usage. root is allowed to allocate slightly more
memory in this mode. This is the default.
If all we want to do is catch clearly bogus allocation requests
irrespective of the general virtual memory situation, the physical
memory counter-part doesn't need to be that complicated, either.
When in GUESS mode, catch wild allocations by comparing their request
size to total amount of ram and swap in the system.
Link: http://lkml.kernel.org/r/20190412191418.26333-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All callers of arch_remove_memory() ignore errors. And we should really
try to remove any errors from the memory removal path. No more errors are
reported from __remove_pages(). BUG() in s390x code in case
arch_remove_memory() is triggered. We may implement that properly later.
WARN in case powerpc code failed to remove the section mapping, which is
better than ignoring the error completely right now.
Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's just warn in case a section is not valid instead of failing to
remove somewhere in the middle of the process, returning an error that
will be mostly ignored by callers.
Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Failing while removing memory is mostly ignored and cannot really be
handled. Let's treat errors in unregister_memory_section() in a nice way,
warning, but continuing.
Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/memory_hotplug: Better error handling when removing
memory", v1.
Error handling when removing memory is somewhat messed up right now. Some
errors result in warnings, others are completely ignored. Memory unplug
code can essentially not deal with errors properly as of now.
remove_memory() will never fail.
We have basically two choices:
1. Allow arch_remov_memory() and friends to fail, propagating errors via
remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple
pieces added/removed separately).
2. Don't allow the functions to fail, handling errors in a nicer way.
It seems like most errors that can theoretically happen are really corner
cases and mostly theoretical (e.g. "section not valid"). However e.g.
aborting removal of sections while all callers simply continue in case of
errors is not nice.
If we can gurantee that removal of memory always works (and WARN/skip in
case of theoretical errors so we can figure out what is going on), we can
go ahead and implement better error handling when adding memory.
E.g. via add_memory():
arch_add_memory()
ret = do_stuff()
if (ret) {
arch_remove_memory();
goto error;
}
Handling here that arch_remove_memory() might fail is basically
impossible. So I suggest, let's avoid reporting errors while removing
memory, warning on theoretical errors instead and continuing instead of
aborting.
This patch (of 4):
__add_pages() doesn't add the memory resource, so __remove_pages()
shouldn't remove it. Let's factor it out. Especially as it is a special
case for memory used as system memory, added via add_memory() and friends.
We now remove the resource after removing the sections instead of doing it
the other way around. I don't think this change is problematic.
add_memory()
register memory resource
arch_add_memory()
remove_memory
arch_remove_memory()
release memory resource
While at it, explain why we ignore errors and that it only happeny if
we remove memory in a different granularity as we added it.
[david@redhat.com: fix printk warning]
Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com
Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Link: http://lkml.kernel.org/r/20190304155240.19215-1-ldufour@linux.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
arch_add_memory, __add_pages take a want_memblock which controls whether
the newly added memory should get the sysfs memblock user API (e.g.
ZONE_DEVICE users do not want/need this interface). Some callers even
want to control where do we allocate the memmap from by configuring
altmap.
Add a more generic hotplug context for arch_add_memory and __add_pages.
struct mhp_restrictions contains flags which contains additional features
to be enabled by the memory hotplug (MHP_MEMBLOCK_API currently) and
altmap for alternative memmap allocator.
This patch shouldn't introduce any functional change.
[akpm@linux-foundation.org: build fix]
Link: http://lkml.kernel.org/r/20190408082633.2864-3-osalvador@suse.de
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
check_pages_isolated_cb currently accounts the whole pfn range as being
offlined if test_pages_isolated suceeds on the range. This is based on
the assumption that all pages in the range are freed which is currently
the case in most cases but it won't be with later changes, as pages marked
as vmemmap won't be isolated.
Move the offlined pages counting to offline_isolated_pages_cb and rely on
__offline_isolated_pages to return the correct value.
check_pages_isolated_cb will still do it's primary job and check the pfn
range.
While we are at it remove check_pages_isolated and offline_isolated_pages
and use directly walk_system_ram_range as do in online_pages.
Link: http://lkml.kernel.org/r/20190408082633.2864-2-osalvador@suse.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add yet another iterator, for_each_free_mem_range_in_zone_from, and then
use it to support initializing and freeing pages in groups no larger than
MAX_ORDER_NR_PAGES. By doing this we can greatly improve the cache
locality of the pages while we do several loops over them in the init and
freeing process.
We are able to tighten the loops further as a result of the "from"
iterator as we can perform the initial checks for first_init_pfn in our
first call to the iterator, and continue without the need for those checks
via the "from" iterator. I have added this functionality in the function
called deferred_init_mem_pfn_range_in_zone that primes the iterator and
causes us to exit if we encounter any failure.
On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 1.85s to 1.38s as a result of this patch.
Link: http://lkml.kernel.org/r/20190405221231.12227.85836.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <yi.z.zhang@linux.intel.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce a new iterator for_each_free_mem_pfn_range_in_zone.
This iterator will take care of making sure a given memory range provided
is in fact contained within a zone. It takes are of all the bounds
checking we were doing in deferred_grow_zone, and deferred_init_memmap.
In addition it should help to speed up the search a bit by iterating until
the end of a range is greater than the start of the zone pfn range, and
will exit completely if the start is beyond the end of the zone.
Link: http://lkml.kernel.org/r/20190405221225.12227.22573.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As best as I can tell the meminit_pfn_in_nid call is completely redundant.
The deferred memory initialization is already making use of
for_each_free_mem_range which in turn will call into __next_mem_range
which will only return a memory range if it matches the node ID provided
assuming it is not NUMA_NO_NODE.
I am operating on the assumption that there are no zones or pgdata_t
structures that have a NUMA node of NUMA_NO_NODE associated with them. If
that is the case then __next_mem_range will never return a memory range
that doesn't match the zone's node ID and as such the check is redundant.
So one piece I would like to verify on this is if this works for ia64.
Technically it was using a different approach to get the node ID, but it
seems to have the node ID also encoded into the memblock. So I am
assuming this is okay, but would like to get confirmation on that.
On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 2.80s to 1.85s as a result of this patch.
Link: http://lkml.kernel.org/r/20190405221219.12227.93957.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have the pra.mapcount already, and there is no need to call the
page_mapped() which may do some complicated computing for compound page.
Link: http://lkml.kernel.org/r/20190404054828.2731-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recently I messed up the error handling in filemap_fault() because of an
unexpected ENOMEM (related to cgroup memory limits) in add_to_page_cache.
Enable error injection at this point so I can add a testcase to xfstests
to verify I don't mess this up again.
[akpm@linux-foundation.org: include linux/error-injection.h]
Link: http://lkml.kernel.org/r/20190403152604.14008-1-josef@toxicpanda.com
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Helper to test if a range is updated to read only (it is still valid to
read from the range). This is useful for device driver or anyone who wish
to optimize out update when they know that they already have the range map
read only.
Link: http://lkml.kernel.org/r/20190326164747.24405-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This updates each existing invalidation to use the correct mmu notifier
event that represent what is happening to the CPU page table. See the
patch which introduced the events to see the rational behind this.
Link: http://lkml.kernel.org/r/20190326164747.24405-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).
Users of mmu notifier API track changes to the CPU page table and take
specific action for them. While current API only provide range of virtual
address affected by the change, not why the changes is happening.
This patchset do the initial mechanical convertion of all the places that
calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP
event as well as the vma if it is know (most invalidation happens against
a given vma). Passing down the vma allows the users of mmu notifier to
inspect the new vma page protection.
The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier
should assume that every for the range is going away when that event
happens. A latter patch do convert mm call path to use a more appropriate
events for each call.
This is done as 2 patches so that no call site is forgotten especialy
as it uses this following coccinelle patch:
%<----------------------------------------------------------------------
@@
identifier I1, I2, I3, I4;
@@
static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1,
+enum mmu_notifier_event event,
+unsigned flags,
+struct vm_area_struct *vma,
struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... }
@@
@@
-#define mmu_notifier_range_init(range, mm, start, end)
+#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end)
@@
expression E1, E3, E4;
identifier I1;
@@
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, I1,
I1->vm_mm, E3, E4)
...>
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(..., struct vm_area_struct *VMA, ...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(...) {
struct vm_area_struct *VMA;
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }
@@
expression E1, E2, E3, E4;
identifier FN;
@@
FN(...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, NULL,
E2, E3, E4)
...> }
---------------------------------------------------------------------->%
Applied with:
spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place
spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place
spatch --sp-file mmu-notifier.spatch --dir mm --in-place
Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the mmu_notifier_range_blockable() helper function instead of directly
dereferencing the range->blockable field. This is done to make it easier
to change the mmu_notifier range field.
This patch is the outcome of the following coccinelle patch:
%<-------------------------------------------------------------------
@@
identifier I1, FN;
@@
FN(..., struct mmu_notifier_range *I1, ...) {
<...
-I1->blockable
+mmu_notifier_range_blockable(I1)
...>
}
------------------------------------------------------------------->%
spatch --in-place --sp-file blockable.spatch --dir .
Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert hmm_pfn_* to device_entry_* as here we are dealing with device
driver specific entry format and hmm provide helpers to allow differents
components (including HMM) to create/parse device entry.
We keep wrapper with the old name so that we can convert driver to use the
new API in stages in each device driver tree. This will get remove once
all driver are converted.
Link: http://lkml.kernel.org/r/20190403193318.16478-13-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a all in one helper that fault pages in a range and map them to a
device so that every single device driver do not have to re-implement this
common pattern.
This is taken from ODP RDMA in preparation of ODP RDMA convertion. It
will be use by nouveau and other drivers.
[jglisse@redhat.com: Was using wrong field and wrong enum]
Link: http://lkml.kernel.org/r/20190409175340.26614-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20190403193318.16478-12-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HMM mirror is a device driver helpers to mirror range of virtual address.
It means that the process jobs running on the device can access the same
virtual address as the CPU threads of that process. This patch adds
support for mirroring mapping of file that are on a DAX block device (ie
range of virtual address that is an mmap of a file in a filesystem on a
DAX block device). There is no reason to not support such case when
mirroring virtual address on a device.
Note that unlike GUP code we do not take page reference hence when we
back-off we have nothing to undo.
[jglisse@redhat.com: move THP and hugetlbfs code path behind #if KCONFIG]
Link: http://lkml.kernel.org/r/20190422163741.13029-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20190403193318.16478-10-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HMM mirror is a device driver helpers to mirror range of virtual address.
It means that the process jobs running on the device can access the same
virtual address as the CPU threads of that process. This patch adds
support for hugetlbfs mapping (ie range of virtual address that are mmap
of a hugetlbfs).
[rcampbell@nvidia.com: fix initial PFN for hugetlbfs pages]
Link: http://lkml.kernel.org/r/20190419233536.8080-1-rcampbell@nvidia.com
Link: http://lkml.kernel.org/r/20190403193318.16478-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The HMM mirror API can be use in two fashions. The first one where the
HMM user coalesce multiple page faults into one request and set flags per
pfns for of those faults. The second one where the HMM user want to
pre-fault a range with specific flags. For the latter one it is a waste
to have the user pre-fill the pfn arrays with a default flags value.
This patch adds a default flags value allowing user to set them for a
range without having to pre-fill the pfn array.
Link: http://lkml.kernel.org/r/20190403193318.16478-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A common use case for HMM mirror is user trying to mirror a range and
before they could program the hardware it get invalidated by some core mm
event. Instead of having user re-try right away to mirror the range
provide a completion mechanism for them to wait for any active
invalidation affecting the range.
This also changes how hmm_range_snapshot() and hmm_range_fault() works by
not relying on vma so that we can drop the mmap_sem when waiting and
lookup the vma again on retry.
Link: http://lkml.kernel.org/r/20190403193318.16478-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Minor optimization around hmm_pte_need_fault(). Rename for consistency
between code, comments and documentation. Also improves the comments on
all the possible returns values. Improve the function by returning the
number of populated entries in pfns array.
Link: http://lkml.kernel.org/r/20190403193318.16478-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename for consistency between code, comments and documentation. Also
improves the comments on all the possible returns values. Improve the
function by returning the number of populated entries in pfns array.
Link: http://lkml.kernel.org/r/20190403193318.16478-5-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Users of HMM might be using the snapshot information to do preparatory
step like dma mapping pages to a device before checking for invalidation
through hmm_vma_range_done() so do not erase that information and assume
users will do the right thing.
Link: http://lkml.kernel.org/r/20190403193318.16478-4-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Every time I read the code to check that the HMM structure does not vanish
before it should thanks to the many lock protecting its removal i get a
headache. Switch to reference counting instead it is much easier to
follow and harder to break. This also remove some code that is no longer
needed with refcounting.
Link: http://lkml.kernel.org/r/20190403193318.16478-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To avoid random config build issue, select mmu notifier when HMM is
selected. In any cases when HMM get selected it will be by users that
will also wants the mmu notifier.
Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
