| Age | Commit message (Collapse) | Author |
|---|
|
We avoid calling __mod_node_page_state(NR_FILE_PAGES) for hugetlb page
now, but it's not enough because later code doesn't handle hugetlb
properly. Actually in our testing, WARN_ON_ONCE(PageDirty(page)) at the
end of this function fires for hugetlb, which makes no sense. So we
should return immediately for hugetlb pages.
Link: http://lkml.kernel.org/r/1496305019-5493-3-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/
https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
|
|
Track the following reclaim counters for every memory cgroup: PGREFILL,
PGSCAN, PGSTEAL, PGACTIVATE, PGDEACTIVATE, PGLAZYFREE and PGLAZYFREED.
These values are exposed using the memory.stats interface of cgroup v2.
The meaning of each value is the same as for global counters, available
using /proc/vmstat.
Also, for consistency, rename mem_cgroup_count_vm_event() to
count_memcg_event_mm().
Link: http://lkml.kernel.org/r/1494530183-30808-1-git-send-email-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.
The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.
If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.
This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.
In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.
One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.
This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.
This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).
Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.
The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
The -EIO returned here can end up overriding whatever error is marked in
the address space, and be returned at fsync time, even when there is a
more appropriate error stored in the mapping.
Read errors are also sometimes tracked on a per-page level using
PG_error. Suppose we have a read error on a page, and then that page is
subsequently dirtied by overwriting the whole page. Writeback doesn't
clear PG_error, so we can then end up successfully writing back that
page and still return -EIO on fsync.
Worse yet, PG_error is cleared during a sync() syscall, but the -EIO
return from that is silently discarded. Any subsystem that is relying on
PG_error to report errors during fsync can easily lose writeback errors
due to this. All you need is a stray sync() call to wait for writeback
to complete and you've lost the error.
Since the handling of the PG_error flag is somewhat inconsistent across
subsystems, let's just rely on marking the address space when there are
writeback errors. Change the TestClearPageError call to ClearPageError,
and make __filemap_fdatawait_range a void return function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
filemap_write_and_wait{_range} will return an error if writeback
initiation fails, but won't clear errors in the address_space. This is
particularly problematic on DAX, as filemap_fdatawrite* is
effectively synchronous there. Ensure that we clear the AS_EIO/AS_ENOSPC
flags when filemap_fdatawrite* returns an error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Resetting this flag is almost certainly racy, and will be problematic
with some coming changes.
Make filemap_fdatawait_keep_errors return int, but not clear the flag(s).
Have jbd2 call it instead of filemap_fdatawait and don't attempt to
re-set the error flag if it fails.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
|
|
Find out if the I/O will trigger a wait due to writeback. If yes,
return -EAGAIN.
Return -EINVAL for buffered AIO: there are multiple causes of
delay such as page locks, dirty throttling logic, page loading
from disk etc. which cannot be taken care of.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
filemap_range_has_page() return true if the file's mapping has
a page within the range mentioned. This function will be used
to check if a write() call will cause a writeback of previous
writes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
So I've noticed a number of instances where it was not obvious from the
code whether ->task_list was for a wait-queue head or a wait-queue entry.
Furthermore, there's a number of wait-queue users where the lists are
not for 'tasks' but other entities (poll tables, etc.), in which case
the 'task_list' name is actively confusing.
To clear this all up, name the wait-queue head and entry list structure
fields unambiguously:
struct wait_queue_head::task_list => ::head
struct wait_queue_entry::task_list => ::entry
For example, this code:
rqw->wait.task_list.next != &wait->task_list
... is was pretty unclear (to me) what it's doing, while now it's written this way:
rqw->wait.head.next != &wait->entry
... which makes it pretty clear that we are iterating a list until we see the head.
Other examples are:
list_for_each_entry_safe(pos, next, &x->task_list, task_list) {
list_for_each_entry(wq, &fence->wait.task_list, task_list) {
... where it's unclear (to me) what we are iterating, and during review it's
hard to tell whether it's trying to walk a wait-queue entry (which would be
a bug), while now it's written as:
list_for_each_entry_safe(pos, next, &x->head, entry) {
list_for_each_entry(wq, &fence->wait.head, entry) {
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Braino fix for iov_iter_revert() misuse"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in generic_file_read_iter()
|
|
Commit afddba49d18f ("fs: introduce write_begin, write_end, and
perform_write aops") introduced AOP_FLAG_UNINTERRUPTIBLE flag which was
checked in pagecache_write_begin(), but that check was removed by
4e02ed4b4a2f ("fs: remove prepare_write/commit_write").
Between these two commits, commit d9414774dc0c ("cifs: Convert cifs to
new aops.") added a check in cifs_write_begin(), but that check was soon
removed by commit a98ee8c1c707 ("[CIFS] fix regression in
cifs_write_begin/cifs_write_end").
Therefore, AOP_FLAG_UNINTERRUPTIBLE flag is checked nowhere. Let's
remove this flag. This patch has no functionality changes.
Link: http://lkml.kernel.org/r/1489294781-53494-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Wrong sign of iov_iter_revert() argument. Unfortunately, slipped through
the testing, since most of the time we don't do anything to the iterator
afterwards and potential oops on walking the iter->iov too far backwards
is too infrequent to be easily triggered.
Add a sanity check in iov_iter_revert() to catch bugs like this one;
fortunately, the same braino hadn't happened in other callers, but we'd
better have a warning if such thing crops up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Patch series "Properly invalidate data in the cleancache", v2.
We've noticed that after direct IO write, buffered read sometimes gets
stale data which is coming from the cleancache. The reason for this is
that some direct write hooks call call invalidate_inode_pages2[_range]()
conditionally iff mapping->nrpages is not zero, so we may not invalidate
data in the cleancache.
Another odd thing is that we check only for ->nrpages and don't check
for ->nrexceptional, but invalidate_inode_pages2[_range] also
invalidates exceptional entries as well. So we invalidate exceptional
entries only if ->nrpages != 0? This doesn't feel right.
- Patch 1 fixes direct IO writes by removing ->nrpages check.
- Patch 2 fixes similar case in invalidate_bdev().
Note: I only fixed conditional cleancache_invalidate_inode() here.
Do we also need to add ->nrexceptional check in into invalidate_bdev()?
- Patches 3-4: some optimizations.
This patch (of 4):
Some direct IO write fs hooks call invalidate_inode_pages2[_range]()
conditionally iff mapping->nrpages is not zero. This can't be right,
because invalidate_inode_pages2[_range]() also invalidate data in the
cleancache via cleancache_invalidate_inode() call. So if page cache is
empty but there is some data in the cleancache, buffered read after
direct IO write would get stale data from the cleancache.
Also it doesn't feel right to check only for ->nrpages because
invalidate_inode_pages2[_range] invalidates exceptional entries as well.
Fix this by calling invalidate_inode_pages2[_range]() regardless of
nrpages state.
Note: nfs,cifs,9p doesn't need similar fix because the never call
cleancache_get_page() (nor directly, nor via mpage_readpage[s]()), so
they are not affected by this bug.
Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache")
Link: http://lkml.kernel.org/r/20170424164135.22350-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Kuznetsov <kuznet@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The round_up() macro generates a couple of unnecessary instructions
in this usage:
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 83 e8 01 sub $0x1,%rax
48d5: 48 0d ff 0f 00 00 or $0xfff,%rax
48db: 48 83 c0 01 add $0x1,%rax
48df: 48 c1 f8 0c sar $0xc,%rax
48e3: 48 39 c3 cmp %rax,%rbx
48e6: 72 2e jb 4916 <filemap_fault+0x96>
If we change round_up() to ((x) + __round_mask(x, y)) & ~__round_mask(x, y)
then GCC can see through it and remove the mask (because that would be
dead code given the subsequent shift):
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 05 ff 0f 00 00 add $0xfff,%rax
48d7: 48 c1 e8 0c shr $0xc,%rax
48db: 48 39 c3 cmp %rax,%rbx
48de: 72 2e jb 490e <filemap_fault+0x8e>
But that's problematic because we'd evaluate 'y' twice. Converting
round_up into an inline function prevents it from being used in other
definitions. The easiest thing to do is just change these three usages
of round_up to use DIV_ROUND_UP. Also add an unlikely() because GCC's
heuristic is wrong in this case.
Link: http://lkml.kernel.org/r/20170207192812.5281-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
./lib/string.c:134: WARNING: Inline emphasis start-string without end-string.
./mm/filemap.c:522: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/filemap.c:1283: ERROR: Unexpected indentation.
./mm/filemap.c:3003: WARNING: Inline interpreted text or phrase reference start-string without end-string.
./mm/vmalloc.c:1544: WARNING: Inline emphasis start-string without end-string.
./mm/page_alloc.c:4245: ERROR: Unexpected indentation.
./ipc/util.c:676: ERROR: Unexpected indentation.
./drivers/pci/irq.c:35: WARNING: Block quote ends without a blank line; unexpected unindent.
./security/security.c:109: ERROR: Unexpected indentation.
./security/security.c:110: WARNING: Definition list ends without a blank line; unexpected unindent.
./block/genhd.c:275: WARNING: Inline strong start-string without end-string.
./block/genhd.c:283: WARNING: Inline strong start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./include/linux/clk.h:134: WARNING: Inline emphasis start-string without end-string.
./ipc/util.c:477: ERROR: Unknown target name: "s".
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
<linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With rw_page, page_endio is used for completing IO on a page and it
propagates write error to the address space if the IO fails. The
problem is it accesses page->mapping directly which might be okay for
file-backed pages but it shouldn't for anonymous page. Otherwise, it
can corrupt one of field from anon_vma under us and system goes panic
randomly.
swap_writepage
bdev_writepage
ops->rw_page
I encountered the BUG during developing new zram feature and it was
really hard to figure it out because it made random crash, somtime
mmap_sem lockdep, sometime other places where places never related to
zram/zsmalloc, and not reproducible with some configuration.
When I consider how that bug is subtle and people do fast-swap test with
brd, it's worth to add stable mark, I think.
Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.
Remove the vma parameter to simplify things.
[arnd@arndb.de: fix ARM build]
Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warnings in mm/filemap.c:
mm/filemap.c:993: warning: No description found for parameter '__page'
mm/filemap.c:993: warning: Excess function parameter 'page' description in '__lock_page'
Link: http://lkml.kernel.org/r/a66fe492-518c-ad6c-5f03-5e8b721fb451@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These are no longer used outside mm/filemap.c, so un-export them and
make them static where possible. These were exported specifically for
NFS use in commit a4796e37c12e ("MM: export page_wakeup functions").
Link: http://lkml.kernel.org/r/20170103182234.30141-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_generic_file_read() can be told to perform a large request from
userspace. If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous. Make
sure we rather go with a short read and allow the killed task to
terminate.
Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently in DAX if we have three read faults on the same hole address we
can end up with the following:
Thread 0 Thread 1 Thread 2
-------- -------- --------
dax_iomap_fault
grab_mapping_entry
lock_slot
<locks empty DAX entry>
dax_iomap_fault
grab_mapping_entry
get_unlocked_mapping_entry
<sleeps on empty DAX entry>
dax_iomap_fault
grab_mapping_entry
get_unlocked_mapping_entry
<sleeps on empty DAX entry>
dax_load_hole
find_or_create_page
...
page_cache_tree_insert
dax_wake_mapping_entry_waiter
<wakes one sleeper>
__radix_tree_replace
<swaps empty DAX entry with 4k zero page>
<wakes>
get_page
lock_page
...
put_locked_mapping_entry
unlock_page
put_page
<sleeps forever on the DAX
wait queue>
The crux of the problem is that once we insert a 4k zero page, all
locking from then on is done in terms of that 4k zero page and any
additional threads sleeping on the empty DAX entry will never be woken.
Fix this by waking all sleepers when we replace the DAX radix tree entry
with a 4k zero page. This will allow all sleeping threads to
successfully transition from locking based on the DAX empty entry to
locking on the 4k zero page.
With the test case reported by Xiong this happens very regularly in my
test setup, with some runs resulting in 9+ threads in this deadlocked
state. With this fix I've been able to run that same test dozens of
times in a loop without issue.
Fixes: ac401cc78242 ("dax: New fault locking")
Link: http://lkml.kernel.org/r/1483479365-13607-1-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte':
mm/filemap.c:933:9: error: too few arguments to function 'test_bit'
return test_bit(PG_waiters);
^~~~~~~~
Fixes: b91e1302ad9b ('mm: optimize PageWaiters bit use for unlock_page()')
Signed-off-by: Olof Johansson <olof@lixom.net>
Brown-paper-bag-by: Linus Torvalds <dummy@duh.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In commit 62906027091f ("mm: add PageWaiters indicating tasks are
waiting for a page bit") Nick Piggin made our page locking no longer
unconditionally touch the hashed page waitqueue, which not only helps
performance in general, but is particularly helpful on NUMA machines
where the hashed wait queues can bounce around a lot.
However, the "clear lock bit atomically and then test the waiters bit"
sequence turns out to be much more expensive than it needs to be,
because you get a nasty stall when trying to access the same word that
just got updated atomically.
On architectures where locking is done with LL/SC, this would be trivial
to fix with a new primitive that clears one bit and tests another
atomically, but that ends up not working on x86, where the only atomic
operations that return the result end up being cmpxchg and xadd. The
atomic bit operations return the old value of the same bit we changed,
not the value of an unrelated bit.
On x86, we could put the lock bit in the high bit of the byte, and use
"xadd" with that bit (where the overflow ends up not touching other
bits), and look at the other bits of the result. However, an even
simpler model is to just use a regular atomic "and" to clear the lock
bit, and then the sign bit in eflags will indicate the resulting state
of the unrelated bit #7.
So by moving the PageWaiters bit up to bit #7, we can atomically clear
the lock bit and test the waiters bit on x86 too. And architectures
with LL/SC (which is all the usual RISC suspects), the particular bit
doesn't matter, so they are fine with this approach too.
This avoids the extra access to the same atomic word, and thus avoids
the costly stall at page unlock time.
The only downside is that the interface ends up being a bit odd and
specialized: clear a bit in a byte, and test the sign bit. Nick doesn't
love the resulting name of the new primitive, but I'd rather make the
name be descriptive and very clear about the limitation imposed by
trying to work across all relevant architectures than make it be some
generic thing that doesn't make the odd semantics explicit.
So this introduces the new architecture primitive
clear_bit_unlock_is_negative_byte();
and adds the trivial implementation for x86. We have a generic
non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)"
combination) which can be overridden by any architecture that can do
better. According to Nick, Power has the same hickup x86 has, for
example, but some other architectures may not even care.
All these optimizations mean that my page locking stress-test (which is
just executing a lot of small short-lived shell scripts: "make test" in
the git source tree) no longer makes our page locking look horribly bad.
Before all these optimizations, just the unlock_page() costs were just
over 3% of all CPU overhead on "make test". After this, it's down to
0.66%, so just a quarter of the cost it used to be.
(The difference on NUMA is bigger, but there this micro-optimization is
likely less noticeable, since the big issue on NUMA was not the accesses
to 'struct page', but the waitqueue accesses that were already removed
by Nick's earlier commit).
Acked-by: Nick Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new page flag, PageWaiters, to indicate the page waitqueue has
tasks waiting. This can be tested rather than testing waitqueue_active
which requires another cacheline load.
This bit is always set when the page has tasks on page_waitqueue(page),
and is set and cleared under the waitqueue lock. It may be set when
there are no tasks on the waitqueue, which will cause a harmless extra
wakeup check that will clears the bit.
The generic bit-waitqueue infrastructure is no longer used for pages.
Instead, waitqueues are used directly with a custom key type. The
generic code was not flexible enough to have PageWaiters manipulation
under the waitqueue lock (which simplifies concurrency).
This improves the performance of page lock intensive microbenchmarks by
2-3%.
Putting two bits in the same word opens the opportunity to remove the
memory barrier between clearing the lock bit and testing the waiters
bit, after some work on the arch primitives (e.g., ensuring memory
operand widths match and cover both bits).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge more updates from Andrew Morton:
- a few misc things
- kexec updates
- DMA-mapping updates to better support networking DMA operations
- IPC updates
- various MM changes to improve DAX fault handling
- lots of radix-tree changes, mainly to the test suite. All leading up
to reimplementing the IDA/IDR code to be a wrapper layer over the
radix-tree. However the final trigger-pulling patch is held off for
4.11.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
radix tree test suite: delete unused rcupdate.c
radix tree test suite: add new tag check
radix-tree: ensure counts are initialised
radix tree test suite: cache recently freed objects
radix tree test suite: add some more functionality
idr: reduce the number of bits per level from 8 to 6
rxrpc: abstract away knowledge of IDR internals
tpm: use idr_find(), not idr_find_slowpath()
idr: add ida_is_empty
radix tree test suite: check multiorder iteration
radix-tree: fix replacement for multiorder entries
radix-tree: add radix_tree_split_preload()
radix-tree: add radix_tree_split
radix-tree: add radix_tree_join
radix-tree: delete radix_tree_range_tag_if_tagged()
radix-tree: delete radix_tree_locate_item()
radix-tree: improve multiorder iterators
btrfs: fix race in btrfs_free_dummy_fs_info()
radix-tree: improve dump output
radix-tree: make radix_tree_find_next_bit more useful
...
|
|
Currently we have two different structures for passing fault information
around - struct vm_fault and struct fault_env. DAX will need more
information in struct vm_fault to handle its faults so the content of
that structure would become event closer to fault_env. Furthermore it
would need to generate struct fault_env to be able to call some of the
generic functions. So at this point I don't think there's much use in
keeping these two structures separate. Just embed into struct vm_fault
all that is needed to use it for both purposes.
Link: http://lkml.kernel.org/r/1479460644-25076-2-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We truncated the possible read iterator to s_maxbytes in commit
c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"),
but our end condition handling was wrong: it's not an error to try to
read at the end of the file.
Reading past the end should return EOF (0), not EINVAL.
See for example
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1649342
http://lists.gnu.org/archive/html/bug-coreutils/2016-12/msg00008.html
where a md5sum of a maximally sized file fails because the final read is
exactly at s_maxbytes.
Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: Wei Fang <fangwei1@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge request includes the dax-4.0-iomap-pmd branch which is
needed for both ext4 and xfs dax changes to use iomap for DAX. It also
includes the fscrypt branch which is needed for ubifs encryption work
as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
dax: Fix sleep in atomic contex in grab_mapping_entry()
fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
fscrypt: Delay bounce page pool allocation until needed
fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
fscrypt: Never allocate fscrypt_ctx on in-place encryption
fscrypt: Use correct index in decrypt path.
fscrypt: move the policy flags and encryption mode definitions to uapi header
fscrypt: move non-public structures and constants to fscrypt_private.h
fscrypt: unexport fscrypt_initialize()
fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
fscrypto: move ioctl processing more fully into common code
fscrypto: remove unneeded Kconfig dependencies
MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: remove another test in ext4_alloc_file_blocks()
Documentation: fix description of ext4's block_validity mount option
ext4: fix checks for data=ordered and journal_async_commit options
...
|
|
Shadow entries in the page cache used to be accounted behind the radix
tree implementation's back in the upper bits of node->count, and the
radix tree code extending a single-entry tree with a shadow entry in
root->rnode would corrupt that counter. As a result, we could not put
shadow entries at index 0 if the tree didn't have any other entries, and
that means no refault detection for any single-page file.
Now that the shadow entries are tracked natively in the radix tree's
exceptional counter, this is no longer necessary. Extending and
shrinking the tree from and to single entries in root->rnode now does
the right thing when the entry is exceptional, remove that limitation.
Link: http://lkml.kernel.org/r/20161117193244.GF23430@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, we track the shadow entries in the page cache in the upper
bits of the radix_tree_node->count, behind the back of the radix tree
implementation. Because the radix tree code has no awareness of them,
we rely on random subtleties throughout the implementation (such as the
node->count != 1 check in the shrinking code, which is meant to exclude
multi-entry nodes but also happens to skip nodes with only one shadow
entry, as that's accounted in the upper bits). This is error prone and
has, in fact, caused the bug fixed in d3798ae8c6f3 ("mm: filemap: don't
plant shadow entries without radix tree node").
To remove these subtleties, this patch moves shadow entry tracking from
the upper bits of node->count to the existing counter for exceptional
entries. node->count goes back to being a simple counter of valid
entries in the tree node and can be shrunk to a single byte.
This vastly simplifies the page cache code. All accounting happens
natively inside the radix tree implementation, and maintaining the LRU
linkage of shadow nodes is consolidated into a single function in the
workingset code that is called for leaf nodes affected by a change in
the page cache tree.
This also removes the last user of the __radix_delete_node() return
value. Eliminate it.
Link: http://lkml.kernel.org/r/20161117193211.GE23430@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The bug in khugepaged fixed earlier in this series shows that radix tree
slot replacement is fragile; and it will become more so when not only
NULL<->!NULL transitions need to be caught but transitions from and to
exceptional entries as well. We need checks.
Re-implement radix_tree_replace_slot() on top of the sanity-checked
__radix_tree_replace(). This requires existing callers to also pass the
radix tree root, but it'll warn us when somebody replaces slots with
contents that need proper accounting (transitions between NULL entries,
real entries, exceptional entries) and where a replacement through the
slot pointer would corrupt the radix tree node counts.
Link: http://lkml.kernel.org/r/20161117193021.GB23430@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Unlike THP, hugetlb pages are represented by one entry in the
radix-tree.
[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/20161110163640.126124-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking. This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled using the new struct
iomap based fault handlers.
There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries. The empty entries exist to provide locking for the duration of a
given page fault.
This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.
Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set. This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees. This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.
One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset. The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases. This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.
If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry. We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry. The 'mapping'
pointer is still used in the same way.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
Starting from 4.9-rc1 kernel, I started noticing some test failures
of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when
testing on sub-page block size filesystems (tested both XFS and
ext4), these syscalls start to return EIO in the tests. e.g.
sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1
sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1
sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1
sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1
This is because that in sub-page block size cases, we don't need the
whole page to be uptodate, only the part we care about is uptodate
is OK (if fs has ->is_partially_uptodate defined). But
page_cache_pipe_buf_confirm() doesn't have the ability to check the
partially-uptodate case, it needs the whole page to be uptodate. So
it returns EIO in this case.
This is a regression introduced by commit 82c156f85384 ("switch
generic_file_splice_read() to use of ->read_iter()"). Prior to the
change, generic_file_splice_read() doesn't allow partially-uptodate
page either, so it worked fine.
Fix it by skipping the partially-uptodate check if we're working on
a pipe in do_generic_file_read(), so we read the whole page from
disk as long as the page is not uptodate.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The per-zone waitqueues exist because of a scalability issue with the
page waitqueues on some NUMA machines, but it turns out that they hurt
normal loads, and now with the vmalloced stacks they also end up
breaking gfs2 that uses a bit_wait on a stack object:
wait_on_bit(&gh->gh_iflags, HIF_WAIT, TASK_UNINTERRUPTIBLE)
where 'gh' can be a reference to the local variable 'mount_gh' on the
stack of fill_super().
The reason the per-zone hash table breaks for this case is that there is
no "zone" for virtual allocations, and trying to look up the physical
page to get at it will fail (with a BUG_ON()).
It turns out that I actually complained to the mm people about the
per-zone hash table for another reason just a month ago: the zone lookup
also hurts the regular use of "unlock_page()" a lot, because the zone
lookup ends up forcing several unnecessary cache misses and generates
horrible code.
As part of that earlier discussion, we had a much better solution for
the NUMA scalability issue - by just making the page lock have a
separate contention bit, the waitqueue doesn't even have to be looked at
for the normal case.
Peter Zijlstra already has a patch for that, but let's see if anybody
even notices. In the meantime, let's fix the actual gfs2 breakage by
simplifying the bitlock waitqueues and removing the per-zone issue.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull splice fixups from Al Viro:
"A couple of fixups for interaction of pipe-backed iov_iter with
O_DIRECT reads + constification of a couple of primitives in uio.h
missed by previous rounds.
Kudos to davej - his fuzzing has caught those bugs"
* 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[btrfs] fix check_direct_IO() for non-iovec iterators
constify iov_iter_count() and iter_is_iovec()
fix ITER_PIPE interaction with direct_IO
|
|
by making sure we call iov_iter_advance() on original
iov_iter even if direct_IO (done on its copy) has returned 0.
It's a no-op for old iov_iter flavours and does the right thing
(== truncation of the stuff we'd allocated, but not filled) in
ITER_PIPE case. Failures (e.g. -EIO) get caught and dealt with
by cleanup in generic_file_read_iter().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We triggered a deadloop in truncate_inode_pages_range() on 32 bits
architecture with the test case bellow:
...
fd = open();
write(fd, buf, 4096);
preadv64(fd, &iovec, 1, 0xffffffff000);
ftruncate(fd, 0);
...
Then ftruncate() will not return forever.
The filesystem used in this case is ubifs, but it can be triggered on
many other filesystems.
When preadv64() is called with offset=0xffffffff000, a page with
index=0xffffffff will be added to the radix tree of ->mapping. Then
this page can be found in ->mapping with pagevec_lookup(). After that,
truncate_inode_pages_range(), which is called in ftruncate(), will fall
into an infinite loop:
- find a page with index=0xffffffff, since index>=end, this page won't
be truncated
- index++, and index become 0
- the page with index=0xffffffff will be found again
The data type of index is unsigned long, so index won't overflow to 0 on
64 bits architecture in this case, and the dead loop won't happen.
Since truncate_inode_pages_range() is executed with holding lock of
inode->i_rwsem, any operation related with this lock will be blocked,
and a hung task will happen, e.g.:
INFO: task truncate_test:3364 blocked for more than 120 seconds.
...
call_rwsem_down_write_failed+0x17/0x30
generic_file_write_iter+0x32/0x1c0
ubifs_write_iter+0xcc/0x170
__vfs_write+0xc4/0x120
vfs_write+0xb2/0x1b0
SyS_write+0x46/0xa0
The page with index=0xffffffff added to ->mapping is useless. Fix this
by checking the read position before allocating pages.
Link: http://lkml.kernel.org/r/1475151010-40166-1-git-send-email-fangwei1@huawei.com
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a fatal signal has been received, fail immediately instead of trying
to read more data.
If wait_on_page_locked_killable() was interrupted then this page is most
likely is not PageUptodate() and in this case do_generic_file_read()
will fail after lock_page_killable().
See also commit ebded02788b5 ("mm: filemap: avoid unnecessary calls to
lock_page when waiting for IO to complete during a read")
[oleg@redhat.com: changelog addition]
Link: http://lkml.kernel.org/r/63068e8e-8bee-b208-8441-a3c39a9d9eb6@sandisk.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs and iomap updates from Dave Chinner:
"The main things in this update are the iomap-based DAX infrastructure,
an XFS delalloc rework, and a chunk of fixes to how log recovery
schedules writeback to prevent spurious corruption detections when
recovery of certain items was not required.
The other main chunk of code is some preparation for the upcoming
reflink functionality. Most of it is generic and cleanups that stand
alone, but they were ready and reviewed so are in this pull request.
Speaking of reflink, I'm currently planning to send you another pull
request next week containing all the new reflink functionality. I'm
working through a similar process to the last cycle, where I sent the
reverse mapping code in a separate request because of how large it
was. The reflink code merge is even bigger than reverse mapping, so
I'll be doing the same thing again....
Summary for this update:
- change of XFS mailing list to linux-xfs@vger.kernel.org
- iomap-based DAX infrastructure w/ XFS and ext2 support
- small iomap fixes and additions
- more efficient XFS delayed allocation infrastructure based on iomap
- a rework of log recovery writeback scheduling to ensure we don't
fail recovery when trying to replay items that are already on disk
- some preparation patches for upcoming reflink support
- configurable error handling fixes and documentation
- aio access time update race fixes for XFS and
generic_file_read_iter"
* tag 'xfs-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (40 commits)
fs: update atime before I/O in generic_file_read_iter
xfs: update atime before I/O in xfs_file_dio_aio_read
ext2: fix possible integer truncation in ext2_iomap_begin
xfs: log recovery tracepoints to track current lsn and buffer submission
xfs: update metadata LSN in buffers during log recovery
xfs: don't warn on buffers not being recovered due to LSN
xfs: pass current lsn to log recovery buffer validation
xfs: rework log recovery to submit buffers on LSN boundaries
xfs: quiesce the filesystem after recovery on readonly mount
xfs: remote attribute blocks aren't really userdata
ext2: use iomap to implement DAX
ext2: stop passing buffer_head to ext2_get_blocks
xfs: use iomap to implement DAX
xfs: refactor xfs_setfilesize
xfs: take the ilock shared if possible in xfs_file_iomap_begin
xfs: fix locking for DAX writes
dax: provide an iomap based fault handler
dax: provide an iomap based dax read/write path
dax: don't pass buffer_head to copy_user_dax
dax: don't pass buffer_head to dax_insert_mapping
...
|
|
Commit 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker
caused by replace_page_cache_page()") switched replace_page_cache() from
raw radix tree operations to page_cache_tree_insert() but didn't take
into account that the latter function, unlike the raw radix tree op,
handles mapping->nrpages. As a result, that counter is bumped for each
page replacement rather than balanced out even.
The mapping->nrpages counter is used to skip needless radix tree walks
when invalidating, truncating, syncing inodes without pages, as well as
statistics for userspace. Since the error is positive, we'll do more
page cache tree walks than necessary; we won't miss a necessary one.
And we'll report more buffer pages to userspace than there are. The
error is limited to fuse inodes.
Fixes: 22f2ac51b6d6 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
