| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Resolved kernel/bpf/btf.c using instructions from merge commit
69138b34a7248d2396ab85c8652e20c0c39beaba
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Sparse is not happy about restricted type being assigned:
lib/vsprintf.c:1940:23: warning: incorrect type in assignment (different base types)
lib/vsprintf.c:1940:23: expected unsigned long [assigned] flags
lib/vsprintf.c:1940:23: got restricted gfp_t [usertype]
Force type of flags value to make sparse happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200731180825.30575-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
|
|
When printing phandle via %pOFp the custom spec is used. First of all,
it has a SMALL flag which makes no sense for decimal numbers. Second,
we have already default spec for decimal numbers. Use the latter in
the %pOFp case as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Grant Likely <grant.likely@arm.com>
Link: https://lore.kernel.org/r/20200731180825.30575-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
|
|
First of all, there is no compile time check for the SMALL
to be ' ' (0x20, i.e. space). Second, for ZEROPAD the check
is hidden in the code.
For better maintenance replace BUILD_BUG_ON() with static_assert()
for ZEROPAD and move it closer to the definition. While at it,
introduce check for SMALL.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: https://lore.kernel.org/r/20200731180825.30575-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
|
|
Conflicts:
arch/arm/include/asm/percpu.h
As Stephen Rothwell noted, there's a conflict between this commit
in locking/core:
a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
and this fresh upstream commit:
aa54ea903abb ("ARM: percpu.h: fix build error")
a21ee6055c30 is a simpler solution to the dependency problem and doesn't
further increase header hell - so this conflict resolution effectively
reverts aa54ea903abb and uses the a21ee6055c30 solution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
- Add unzstd() and the zstd decompress interface.
- Add zstd support to decompress_method().
The decompress_method() and unzstd() functions are used to decompress
the initramfs and the initrd. The __decompress() function is used in
the preboot environment to decompress a zstd compressed kernel.
The zstd decompression function allows the input and output buffers to
overlap because that is used by x86 kernel decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com
|
|
These changes are necessary to get the build to work in the preboot
environment, and to get reasonable performance:
- Remove a double definition of the CHECK_F macro when the zstd
library is amalgamated.
- Switch ZSTD_copy8() to __builtin_memcpy(), because in the preboot
environment on x86 gcc can't inline `memcpy()` otherwise.
- Limit the gcc hack in ZSTD_wildcopy() to the broken gcc version. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81388.
ZSTD_copy8() and ZSTD_wildcopy() are in the core of the zstd hot loop.
So outlining these calls to memcpy(), and having an extra branch are very
detrimental to performance.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-2-nickrterrell@gmail.com
|
|
Add mpi_sub_ui() based on Gnu MP mpz_sub_ui() function from file
mpz/aors_ui.h[1] from change id 510b83519d1c adapting the code to the
kernel's data structures, helper functions and coding style and also
removing the defines used to produce mpz_sub_ui() and mpz_add_ui()
from the same code.
[1] https://gmplib.org/repo/gmp-6.2/file/510b83519d1c/mpz/aors.h
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the v5.9 RCU bits from Paul E. McKenney:
- Documentation updates
- Miscellaneous fixes
- kfree_rcu updates
- RCU tasks updates
- Read-side scalability tests
- SRCU updates
- Torture-test updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Asserting that preemption is enabled or disabled is a critical sanity
check. Developers are usually reluctant to add such a check in a
fastpath as reading the preemption count can be costly.
Extend the lockdep API with macros asserting that preemption is disabled
or enabled. If lockdep is disabled, or if the underlying architecture
does not support kernel preemption, this assert has no runtime overhead.
References: f54bb2ec02c8 ("locking/lockdep: Add IRQs disabled/enabled assertion APIs: ...")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-8-a.darwish@linutronix.de
|
|
This patch restores the RCU marking on bucket_table->buckets as
it really does need RCU protection. Its removal had led to a fatal
bug.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pldmfw library is used to implement common logic needed to flash
devices based on firmware files using the format described by the PLDM
for Firmware Update standard.
This library consists of logic to parse the PLDM file format from
a firmware file object, as well as common logic for sending the relevant
PLDM header data to the device firmware.
A simple ops table is provided so that device drivers can implement
device specific hardware interactions while keeping the common logic to
the pldmfw library.
This library will be used by the Intel ice networking driver as part of
implementing device flash update via devlink. The library aims to be
vendor and device agnostic. For this reason, it has been placed in
lib/pldmfw, in the hopes that other devices which use the PLDM firmware
file format may benefit from it in the future. However, do note that not
all features defined in the PLDM standard have been implemented.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the new MMU_NOTIFY_MIGRATE event to skip MMU invalidations of device
private memory and handle the invalidation in the driver as part of
migrating device private memory.
Link: https://lore.kernel.org/r/20200723223004.9586-6-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Prior to commit:
859d069ee1dd ("lockdep: Prepare for NMI IRQ state tracking")
IRQ state tracking was disabled in NMIs due to nmi_enter()
doing lockdep_off() -- with the obvious requirement that NMI entry
call nmi_enter() before trace_hardirqs_off().
[ AFAICT, PowerPC and SH violate this order on their NMI entry ]
However, that commit explicitly changed lockdep_hardirqs_*() to ignore
lockdep_off() and breaks every architecture that has irq-tracing in
it's NMI entry that hasn't been fixed up (x86 being the only fixed one
at this point).
The reason for this change is that by ignoring lockdep_off() we can:
- get rid of 'current->lockdep_recursion' in lockdep_assert_irqs*()
which was going to to give header-recursion issues with the
seqlock rework.
- allow these lockdep_assert_*() macros to function in NMI context.
Restore the previous state of things and allow an architecture to
opt-in to the NMI IRQ tracking support, however instead of relying on
lockdep_off(), rely on in_nmi(), both are part of nmi_enter() and so
over-all entry ordering doesn't need to change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200727124852.GK119549@hirez.programming.kicks-ass.net
|
|
This reverts commit 2d38dbf89a06d0f689daec9842c5d3295c49777f as it broke
the build in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2d38dbf89a06 ("test_firmware: Test platform fw loading on non-EFI systems")
Cc: stable@vger.kernel.org
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727165539.0e8797ab@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Export ddebug_exec_queries() for use by modules.
This will allow module authors to control all their *pr_debug*s
dynamically. And since ddebug_exec_queries() is what implements
"echo $query >control", it gives the same per-callsite control.
Virtues of this:
- simplicity. just an export.
- full control over any/all subsets of callsites.
- same "query/command-string" in code and console
- full callsite selectivity with module file line format
Format in particular deserves special attention; it is where
low-hanging fruit will be found.
Consider: drivers/gpu/drm/amd/display/include/logger_types.h:
#define DC_LOG_SURFACE(...) pr_debug("[SURFACE]:"__VA_ARGS__)
#define DC_LOG_HW_LINK_TRAINING(...) pr_debug("[HW_LINK_TRAINING]:"__VA_ARGS__)
.. 9 more ..
Thats 11 string prefixes, used in 804 places in drivers/gpu/**
Clearly this is a systematized classification of those callsites.
And one I'd expect to see repeated often.
Using ddebug_exec_queries(), authors can select on those prefixes
as a unitary set, equivalent to:
echo "module=MODULE_NAME format=^[SURFACE]: +p" >control
Trivially, those sets can be subsected with the other query terms too,
say file=foo, should the author see fit.
Perhaps as important, users can modify the set of enabled callsites,
presumably to aid debugging by enabling helpful debug callsites, and
disabling those that just clutter the info.
Authors could even alter [fmlt] flags, though I dont see a good reason
why they would. Perhaps harnessed by bug-logging automation to get
fuller, or more minimal bug-reports.
DRM
drm has both drm.debug, which defines 32 categories of drm_printk
logging, and entirely separate uses of pr_debug, which are dynamic on
this i915 laptop, running mainline. So I can observe and report on
both.
The i915 driver has 118 dyndbg callsites, with following
"classifications" defined in drivers/gpu/drm/i915/gvt/**
$ grep 915 /proc/dynamic_debug/control | cut -d= -f2 | cut -d: -f1,2 | sort -u
_ "gvt: cmd
_ "gvt: core
_ "gvt: dpy
_ "gvt: el
_ "gvt: irq
_ "gvt: mm
_ "gvt: mmio
_ "gvt: render
_ "gvt: sched
_ "%s for root hub!\012"
_ "Vendor defined info completion code %u\012"
This classification is entirely out-of-band for control by drm.debug,
and is only available to root user at the console. But module authors
can activate them with ddebug_exec_queries(sprintf("format=^%s +p")),
and then decide how to expose the groups to the user for max utility.
drm.debug
drm.debug has 32 bit-flags, and matching enum drm_debug_category
values to classify the ~2943 DRM_DEBUG*() callsites in drivers/gpu
The drm.debug callback could invoke ddebug_exec_queries() with 32
different hardcoded query strings, needing only (bit) ? " +p" : " -p"
added.
I briefly enabled drm.debug=0xff on my i915 laptop, which yielded
these unique prefixes: (dmesg | cut -c17- | cut -d\] -f1 | sort -u)
[drm:drm_atomic_check_only [drm
[drm:drm_atomic_get_crtc_state [drm
[drm:drm_atomic_get_plane_state [drm
[drm:drm_atomic_nonblocking_commit [drm
[drm:drm_atomic_set_fb_for_plane [drm
[drm:drm_atomic_state_default_clear [drm
[drm:__drm_atomic_state_free [drm
[drm:drm_atomic_state_init [drm
[drm:drm_crtc_vblank_helper_get_vblank_timestamp_internal [drm
[drm:drm_handle_vblank [drm
[drm:drm_ioctl [drm
[drm:drm_mode_addfb2 [drm
[drm:drm_mode_object_get [drm
[drm:drm_mode_object_put.part.0 [drm
[drm:drm_update_vblank_count [drm
[drm:drm_vblank_enable [drm
[drm:drm_vblank_restore [drm
[drm:vblank_disable_fn [drm
i915 0000:00:02.0: [drm:gen9_set_dc_state [i915
i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915
i915 0000:00:02.0: [drm:__intel_display_power_get_domain.part.0 [i915
i915 0000:00:02.0: [drm:__intel_display_power_put_domain [i915
i915 0000:00:02.0: [drm:intel_plane_atomic_calc_changes [i915
i915 0000:00:02.0: [drm:skl_enable_dc6 [i915
Several good format=^prefixes are apparent there, and some misses.
^[drm:drm_atomic_ # misses: [drm:__drm_atomic_state_free [drm
^[drm:drm_ioctl
^[drm:drm_mode
^[drm:drm_vblank_ # misses: [drm:drm_update_vblank_count & [drm:vblank_disable_fn
Its not a perfect 1:1 single format-match per class, but the misses
above can be covered with 1 & 2 additional queries, which can be
concatenated together with ";" separators and submitted with 1 call.
Benefits:
For drm, adapting DRM_DEBUG to use dynamic-debug inside could
replicate (and thereby obsolete) lots of bit-checking in current
DRM_DEBUG callsites, at least with JUMP_LABEL optimized code.
ddebug_exec_queries() and a handful of fixed query-strings can select
and thereby control the already classified callsites.
With the classes mapped to queries, the enum type and parameter can be
eliminated (folded away with macro magic), at least for DYNAMIC_DEBUG
& JUMP_LABEL builds.
Is it safe ?
ddebug_exec_queries() is currently exposed to user space in
several limited ways;
1 it is called from module-load callback, where it implements the
$modname.dyndbg=+p "fake" parameter provided to all modules.
2 it handles query input via >control directly
IOW, it is "fully" exposed to local root user; exposing the same
functionality to other kernel modules is no additional risk.
The other standard issue to check is locking:
dyndbg has a single mutex, taken by ddebug_change to handle >control,
and by ddebug_proc_(start|stop) to span `cat control`. Queries
submitted via export will typically have module specified, which
dramatically cuts the scan by ddebug_change vs "module=* +p".
ISTM this proposed export presents no locking problems.
TLDR;
It would be interesting to see how drm.dyndbg=$QUERY and
drm.debug=$HEXY would interact; it might be order dependent, as
if given as modprobe args or in /etc/modprobe.d/
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-19-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For log-message output, reduce column space consumed by current
pr_fmt by dropping __func__ and shortening "dynamic_debug" to
"dyndbg". This improves readability on narrow consoles, and better
matches other kernel boot info messages.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-18-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This should work:
echo module=amd* format=^[IF_TRACE]: +p >/proc/dynamic_debug/control
consider drivers/gpu/drm/amd/display/include/logger_types.h:
It has 11 defines like:
#define DC_LOG_IF_TRACE(...) pr_debug("[IF_TRACE]:"__VA_ARGS__)
These defines are used 804 times at recent count; they are a good use
case to evaluate existing format-message based classifications of
*pr_debug*. Those macros prefix the supplied format with a fixed
string, I'd expect most existing message classification schemes to do
something similar.
Hence we want to be able to anchor our match to the beginning of the
format string, allowing easy construction of clear and precise
queries, leveraging the existing classification scheme to enable and
disable those callsites.
Note that unlike other search terms, formats are implicitly floating
substring matches, without the need for explicit wildcards.
This makes no attempt at wider regex features, just the one we need.
TLDR: Using the anchor also means the []s are less helpful for
disamiguating the prefix from a random in-message occurrence, allowing
shorter prefixes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-17-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
flags & mask are used together everywhere, and are passed around
together between multiple functions; they belong together in a struct,
call that struct flag_settings.
Use struct flag_settings to rework 3 functions:
- ddebug_exec_query - declares query and flag-settings,
calls other 2, passing flags
- ddebug_parse_flags - fills flag_settings and returns
- ddebug_change - test all callsites against query,
modify passing sites.
benefits:
- bit-banging always needs flags & mask, best together.
- simpler function signatures
- 1 less parameter, less stack overhead
no functional changes
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code expects "keyword" "arg" as 2 words, space separated.
Change to also accept "keyword=arg" form as well, and drop !(nwords%2)
requirement. Then in rest of function, use new keyword, arg variables
instead of word[i], word[i+1]
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Accept these additional query forms:
echo "file $filestr +_" > control
path/to/file.c:100 # as from control, column 1
path/to/file.c:1-100 # or any legal line-range
path/to/file.c:func_A # as from an editor/browser
path/to/file.c:drm_* # wildcards still work
path/to/file.c:*_foo # lead wildcard too
1st 2 examples are treated as line-ranges, 3-5 are treated as func's
Doc these changes, and sprinkle in a few extra wild-card examples and
trailing # explanation texts.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the code-block reusable to later handle "file foo.c:101-200" etc.
This is a 99% code move, with reindent, function wrap&call, +pr_debug.
no functional changes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reduce word count via gcc ?: extension, no actual code change.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-12-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
loadable modules are the last in on this list, and are the only
modules that could be removed. ddebug_remove_module() searches from
head, but ddebug_add_module() uses list_add_tail(). Change it to
list_add() for a micro-optimization.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-11-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ddebug_exec_query declares an auto var, and passes it to
ddebug_parse_query, which memsets it before using it. Drop that
memset, instead initialize the variable in the caller; let the
compiler decide how to do it.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
this pr_err attempts to print the string after the OP, but the string
has been parsed and chopped up, so looks empty.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
during dyndbg init, verbose logging prints its ram overhead. It
counted strlens of struct _ddebug's 4 string members, in all callsite
entries, which would be approximately correct if each had been
mallocd. But they are pointers into shared .rodata; for example, all
10 kobject callsites have identical filename, module values.
Its best not to count that memory at all, since we cannot know they
were linked in because of CONFIG_DYNAMIC_DEBUG=y, and we want to
report a number that reflects what ram is saved by deconfiguring it.
Also fix wording and size under-reporting of the __dyndbg section.
Heres my overhead, on a virtme-run VM on a fedora-31 laptop:
dynamic_debug:dynamic_debug_init: 260 modules, 2479 entries \
and 10400 bytes in ddebug tables, 138824 bytes in __dyndbg section
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dyndbg populates its callsite info into __verbose section, change that
to a more specific and descriptive name, __dyndbg.
Also, per checkpatch:
simplify __attribute(..) to __section(__dyndbg) declaration.
and 1 spelling fix, decriptor
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The verbose/debug logging done for `cat $MNT/dynamic_debug/control` is
voluminous (2 per control file entry + 2 per PAGE). Moreover, it just
prints pointer and sequence, which is not useful to a dyndbg user.
So just drop them.
Also require verbose>=2 for several other debug printks that are a bit
too chatty for typical needs;
ddebug_change() prints changes, once per modified callsite. Since
queries like "+p" will enable ~2300 callsites in a typical laptop, a
user probably doesn't need to see them often. ddebug_exec_queries()
still summarizes with verbose=1.
ddebug_(add|remove)_module() also print 1 line per action on a module,
not needed by typical modprobe user.
This leaves verbose=1 better focussed on the >control parsing process.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bad78c55002 ("lib/dynamic_debug.c: use seq_open_private() instead of seq_open()")'
The commit was one of a tree-wide set which replaced open-coded
boilerplate with a single tail-call. It therefore obsoleted the
comment about that boilerplate, clean that up now.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since debugfs include sensitive information it need to be treated
carefully. But it also has many very useful debug functions for userspace.
With this option we can have same configuration for system with
need of debugfs and a way to turn it off. This gives a extra protection
for exposure on systems where user-space services with system
access are attacked.
It is controlled by a configurable default value that can be override
with a kernel command line parameter. (debugfs=)
It can be on or off, but also internally on but not seen from user-space.
This no-mount mode do not register a debugfs as filesystem, but client can
register their parts in the internal structures. This data can be readed
with a debugger or saved with a crashkernel. When it is off clients
get EPERM error when accessing the functions for registering their
components.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Link: https://lore.kernel.org/r/20200716071511.26864-3-peter.enderborg@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Most of the tree only uses and implements csum_partial_copy_nocheck,
but the c6x and lib/checksum.c implement a csum_partial_copy that
isn't used anywere except to define csum_partial_copy. Get rid of
this pointless alias.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the driver core fixes in here too.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
[ tglx: Distangled it from the mess in -next ]
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: hch@lst.de
Link: https://lkml.kernel.org/r/20200716084747.8034-1-miaoqinglang@huawei.com
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This reverts commit 3203c9010060 ("test_bpf: flag tests that cannot
be jited on s390").
The s390 bpf JIT previously had a restriction on the maximum program
size, which required some tests in test_bpf to be flagged as expected
failures. The program size limitation has been removed, and the tests
now pass, so these tests should no longer be flagged.
Fixes: d1242b10ff03 ("s390/bpf: Remove JITed image size limitations")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20200716143931.330122-1-seth.forshee@canonical.com
|
|
Add a function sha256() which computes a SHA-256 digest in one step,
combining sha256_init() + sha256_update() + sha256_final().
This is similar to how we also have blake2s().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds a declaration for chacha20poly1305_selftest to
silence a sparse warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
