Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
|
|
Pull lockdep capacity limit updates from Tetsuo Handa:
"syzbot is occasionally reporting that fuzz testing is terminated due
to hitting upper limits lockdep can track.
Analysis via /proc/lockdep* did not show any obvious culprits, allow
tuning tracing capacity constants"
* tag 'tomoyo-pr-20210426' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
lockdep: Allow tuning tracing capacity constants.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"New features:
- ARM TEE backend for kernel trusted keys to complete the existing
TPM backend
- ASN.1 format for TPM2 trusted keys to make them interact with the
user space stack, such as OpenConnect VPN
Other than that, a bunch of bug fixes"
* tag 'tpmdd-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Fix missing null return from kzalloc call
char: tpm: fix error return code in tpm_cr50_i2c_tis_recv()
MAINTAINERS: Add entry for TEE based Trusted Keys
doc: trusted-encrypted: updates with TEE as a new trust source
KEYS: trusted: Introduce TEE based Trusted Keys
KEYS: trusted: Add generic trusted keys framework
security: keys: trusted: Make sealed key properly interoperable
security: keys: trusted: use ASN.1 TPM2 key format for the blobs
security: keys: trusted: fix TPM2 authorizations
oid_registry: Add TCG defined OIDS for TPM keys
lib: Add ASN.1 encoder
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
tpm: acpi: Check eventlog signature before using it
tpm: efi: Use local variable for calculating final log size
|
|
The test code in scripts/test_dwarf5_support.sh is somewhat difficult
to understand, but after all, we want to check binutils >= 2.35.2
From the former discussion, the requirement for generating DWARF v5 from
C code is as follows:
- gcc + gnu as -> requires gcc 5.0+ (but 7.0+ for full support)
- clang + gnu as -> requires binutils 2.35.2+
- clang + integrated as -> OK
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
It can be quite useful to have ld emit a link map file, in order to
debug or verify that special sections end up where they are supposed
to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid
of.
The only reason I'm not just adding this unconditionally is that the
.map file can be rather large (several MB), and that's a waste of
space when one isn't interested in these things. Also make it depend
on CONFIG_EXPERT.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in
favour of %pS and %ps") removed support for %pF and %pf, and correctly
removed the handling of those cases in vbin_printf(). However, the
corresponding cases in bstr_printf() were left behind.
In the same series, %pf was re-purposed for dealing with
fwnodes (3bd32d6a2ee6, "lib/vsprintf: Add %pfw conversion specifier
for printing fwnode names").
So should anyone use %pf with the binary printf routines,
vbin_printf() would (correctly, as it involves dereferencing the
pointer) do the string formatting to the u32 array, but bstr_printf()
would not copy the string from the u32 array, but instead interpret
the first sizeof(void*) bytes of the formatted string as a pointer -
which generally won't end well (also, all subsequent get_args would be
out of sync).
Fixes: 9af7706492f9 ("lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps")
Cc: stable@vger.kernel.org
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210423094529.1862521-1-linux@rasmusvillemoes.dk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
|
|
The word is spelt with a final "d" of course. What a massive messup!
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add an iterator, ITER_XARRAY, that walks through a set of pages attached to
an xarray, starting at a given page and offset and walking for the
specified amount of bytes. The iterator supports transparent huge pages.
The iterate_xarray() macro calls the helper function with rcu_access()
helped. I think that this is only a problem for iov_iter_for_each_range()
- and that returns an error for ITER_XARRAY (also, this function does not
appear to be called).
The caller must guarantee that the pages are all present and they must be
locked using PG_locked, PG_writeback or PG_fscache to prevent them from
going away or being migrated whilst they're being accessed.
This is useful for copying data from socket buffers to inodes in network
filesystems and for transferring data between those inodes and the cache
using direct I/O.
Whilst it is true that ITER_BVEC could be used instead, that would require
a bio_vec array to be allocated to refer to all the pages - which should be
redundant if inode->i_pages also points to all these pages.
Note that older versions of this patch implemented an ITER_MAPPING instead,
which was almost the same.
Changes:
v7:
- Rename iter_xarray_copy_pages() to iter_xarray_populate_pages()[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3577430.1579705075@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/158861205740.340223.16592990225607814022.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465785214.1376674.6062549291411362531.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588477334.3465195.3608963255682568730.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118129703.1232039.17141248432017826976.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161026313.2537118.14676007075365418649.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340386671.1303470.10752208972482479840.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539527815.286939.14607323792547049341.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653786033.2770958.14154191921867463240.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789064740.6155.11932541175173658065.stgit@warthog.procyon.org.uk/ # v6
Link: https://lore.kernel.org/r/27c369a8f42bb8a617672b2dc0126a5c6df5a050.camel@kernel.org [1]
|
|
Fix function name in chacha.c kernel-doc comment to remove a warning.
Convert af_alg.c to kernel-doc notation to eliminate many kernel-doc
warnings.
../lib/crypto/chacha.c:77: warning: expecting prototype for chacha_block(). Prototype was for chacha_block_generic() instead
chacha.c:104: warning: Excess function parameter 'out' description in 'hchacha_block_generic'
af_alg.c:498: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_tsgl'
../crypto/af_alg.c:539: warning: expecting prototype for aead_count_tsgl(). Prototype was for af_alg_count_tsgl() instead
../crypto/af_alg.c:596: warning: expecting prototype for aead_pull_tsgl(). Prototype was for af_alg_pull_tsgl() instead
af_alg.c:663: warning: Function parameter or member 'areq' not described in 'af_alg_free_areq_sgls'
af_alg.c:700: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_wmem'
af_alg.c:700: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_wmem'
af_alg.c:731: warning: Function parameter or member 'sk' not described in 'af_alg_wmem_wakeup'
af_alg.c:757: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_data'
af_alg.c:757: warning: Function parameter or member 'min' not described in 'af_alg_wait_for_data'
af_alg.c:796: warning: Function parameter or member 'sk' not described in 'af_alg_data_wakeup'
af_alg.c:832: warning: Function parameter or member 'sock' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'msg' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'size' not described in 'af_alg_sendmsg'
af_alg.c:832: warning: Function parameter or member 'ivsize' not described in 'af_alg_sendmsg'
af_alg.c:985: warning: Function parameter or member 'sock' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'page' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'offset' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'size' not described in 'af_alg_sendpage'
af_alg.c:985: warning: Function parameter or member 'flags' not described in 'af_alg_sendpage'
af_alg.c:1040: warning: Function parameter or member 'areq' not described in 'af_alg_free_resources'
af_alg.c:1059: warning: Function parameter or member '_req' not described in 'af_alg_async_cb'
af_alg.c:1059: warning: Function parameter or member 'err' not described in 'af_alg_async_cb'
af_alg.c:1083: warning: Function parameter or member 'file' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'sock' not described in 'af_alg_poll'
af_alg.c:1083: warning: Function parameter or member 'wait' not described in 'af_alg_poll'
af_alg.c:1114: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_areq'
af_alg.c:1114: warning: Function parameter or member 'areqlen' not described in 'af_alg_alloc_areq'
af_alg.c:1146: warning: Function parameter or member 'sk' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'msg' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'flags' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'areq' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'maxsize' not described in 'af_alg_get_rsgl'
af_alg.c:1146: warning: Function parameter or member 'outlen' not described in 'af_alg_get_rsgl'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Align the expected result with one actually produced for easier visual
comparison; this has to take into account what the format specifiers
will actually produce rather than the characters they consist of. E.g.:
test_div64: ERROR: 10000000ab275080 / 00000009 => 01c71c71da20d00e,00000002
test_div64: ERROR: expected value => 0000000013045e47,00000001
(with a failure induced by setting bit #60 of the divident).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Implement a module for correctness and performance evaluation for the
`do_div' function, often handled in an optimised manner by platform
code. Use a somewhat randomly generated set of inputs that is supposed
to be representative, using the same set of divisors twice, expressed as
a constant and as a variable each, so as to verify the implementation
for both cases should they be handled by different code execution paths.
Reference results were produced with GNU bc.
At the conclusion output the total execution time elapsed.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.
Add kernel-doc for some function parameters that was missing. Use
kernel-doc "Return:" notation in earlycpio.c.
Quietens the following warnings:
lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead
lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'
lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'
lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'
Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885a8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SCHED_DEBUG is not in fact required for LATENCYTOP, don't select it.
Suggested-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210412102001.224578981@infradead.org
|
|
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We have a need in the TPM2 trusted keys to return the ASN.1 form of the TPM
key blob so it can be operated on by tools outside of the kernel. The
specific tools are the openssl_tpm2_engine, openconnect and the Intel
tpm2-tss-engine. To do that, we have to be able to read and write the same
binary key format the tools use. The current ASN.1 decoder does fine for
reading, but we need pieces of an ASN.1 encoder to write the key blob in
binary compatible form.
For backwards compatibility, the trusted key reader code will still accept
the two TPM2B quantities that it uses today, but the writer will only
output the ASN.1 form.
The current implementation only encodes the ASN.1 bits we actually need.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For the same reason as commit e876f0b69dc9 ("lib/vdso: Allow
architectures to provide the vdso data pointer"), powerpc wants to
avoid calculation of relative position to code.
As the timens_vdso_data is next page to vdso_data, provide
vdso_data pointer to __arch_get_timens_vdso_data() in order
to ease the calculation on powerpc in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/539c4204b1baa77c55f758904a1ea239abbc7a5c.1617209142.git.christophe.leroy@csgroup.eu
|
|
In the same spirit as commit c966533f8c6c ("lib/vdso: Mark do_hres()
and do_coarse() as __always_inline"), mark do_hres_timens() and
do_coarse_timens() __always_inline.
The measurement below in on a non timens process, ie on the fastest path.
On powerpc32, without the patch:
clock-gettime-monotonic-raw: vdso: 1155 nsec/call
clock-gettime-monotonic-coarse: vdso: 813 nsec/call
clock-gettime-monotonic: vdso: 1076 nsec/call
With the patch:
clock-gettime-monotonic-raw: vdso: 1100 nsec/call
clock-gettime-monotonic-coarse: vdso: 667 nsec/call
clock-gettime-monotonic: vdso: 1025 nsec/call
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/90dcf45ebadfd5a07f24241551c62f619d1cb930.1617209142.git.christophe.leroy@csgroup.eu
|
|
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core
Pull KCSAN changes from Paul E. McKenney: misc updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This change adds KASAN-KUnit tests support for the async HW_TAGS mode.
In async mode, tag fault aren't being generated synchronously when a
bad access happens, but are instead explicitly checked for by the kernel.
As each KASAN-KUnit test expect a fault to happen before the test is over,
check for faults as a part of the test handler.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.
KASAN requires a specific kernel command line parameter to make use of this
hw features.
Add KASAN HW execution mode kernel command line parameter.
Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.
[ Add a new var instead of exposing kasan_arg_mode to be consistent with
flags for other command line arguments. ]
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-3-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error. So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.
Link: https://lore.kernel.org/r/20201107082206.GA19079@kroah.com
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Reported-by: syzbot+92340f7b2b4789907fdb@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210405094852.1348499-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When LATENCYTOP, LOCKDEP, or FAULT_INJECTION_STACKTRACE_FILTER is
enabled and ARCH_WANT_FRAME_POINTERS is disabled, Kbuild gives a warning
such as:
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=y] && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS [=n] || MCOUNT [=n]
Selected by [y]:
- LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
Depending on ARCH_WANT_FRAME_POINTERS causes a recursive dependency
error. ARCH_WANT_FRAME_POINTERS is to be selected by the architecture,
and is not supposed to be overridden by other config options.
Link: https://lkml.kernel.org/r/20210329165329.27994-1-julianbraha@gmail.com
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Local `unused' is intentionally unused - it is there to suppress
__must_check warnings.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/202104050216.HflRxfJm-lkp@intel.com
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
|
|
ARM64 currently defaults to posted MMIO (nGnRE), but some devices
require the use of non-posted MMIO (nGnRnE). Introduce a new ioremap()
variant to handle this case. ioremap_np() returns NULL on arches that
do not implement this variant.
sparc64 is the only architecture that needs to be touched directly,
because it includes neither of the generic io.h or iomap.h headers.
This adds the IORESOURCE_MEM_NONPOSTED flag, which maps to this
variant and marks a given resource as requiring non-posted mappings.
This is implemented in the resource system because it is a SoC-level
requirement, so existing drivers do not need special-case code to pick
this ioremap variant.
Then this is implemented in devres by introducing devm_ioremap_np(),
and making devm_ioremap_resource() automatically select this variant
when the resource has the IORESOURCE_MEM_NONPOSTED flag set.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
|
|
We have several modifiers for plain pointers (%p, %px and %pK) and now
also the no_hash_pointers boot parameter. The documentation should help
to choose which variant to use. Importantly, we should discourage %px
in favor of %p (with the new boot parameter when debugging), and stress
that %pK should be only used for procfs and similar files, not dmesg
buffer. This patch clarifies the documentation in that regard.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210225164639.27212-1-vbabka@suse.cz
|
|
Since syzkaller continues various test cases until the kernel crashes,
syzkaller tends to examine more locking dependencies than normal systems.
As a result, syzbot is reporting that the fuzz testing was terminated
due to hitting upper limits lockdep can track [1] [2] [3]. Since analysis
via /proc/lockdep* did not show any obvious culprit [4] [5], we have no
choice but allow tuning tracing capacity constants.
[1] https://syzkaller.appspot.com/bug?id=3d97ba93fb3566000c1c59691ea427370d33ea1b
[2] https://syzkaller.appspot.com/bug?id=381cb436fe60dc03d7fd2a092b46d7f09542a72a
[3] https://syzkaller.appspot.com/bug?id=a588183ac34c1437fc0785e8f220e88282e5a29f
[4] https://lkml.kernel.org/r/4b8f7a57-fa20-47bd-48a0-ae35d860f233@i-love.sakura.ne.jp
[5] https://lkml.kernel.org/r/1c351187-253b-2d49-acaf-4563c63ae7d2@i-love.sakura.ne.jp
References: https://lkml.kernel.org/r/1595640639-9310-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
|
|
Add a kunit_fail_current_test() function to fail the currently running
test, if any, with an error message.
This is largely intended for dynamic analysis tools like UBSAN and for
fakes.
E.g. say I had a fake ops struct for testing and I wanted my `free`
function to complain if it was called with an invalid argument, or
caught a double-free. Most return void and have no normal means of
signalling failure (e.g. super_operations, iommu_ops, etc.).
Key points:
* Always update current->kunit_test so anyone can use it.
* commit 83c4e7a0363b ("KUnit: KASAN Integration") only updated it for
CONFIG_KASAN=y
* Create a new header <kunit/test-bug.h> so non-test code doesn't have
to include all of <kunit/test.h> (e.g. lib/ubsan.c)
* Forward the file and line number to make it easier to track down
failures
* Declare the helper function for nice __printf() warnings about mismatched
format strings even when KUnit is not enabled.
Example output from kunit_fail_current_test("message"):
[15:19:34] [FAILED] example_simple_test
[15:19:34] # example_simple_test: initializing
[15:19:34] # example_simple_test: lib/kunit/kunit-example-test.c:24: message
[15:19:34] not ok 1 - example_simple_test
Fixed minor check patch with checkpatch --fix option:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Uriel Guajardo <urielguajardo@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
TL;DR
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit
Per suggestion from Ted [1], we can reduce the amount of typing by
assuming a convention that these files are named '.kunitconfig'.
In the case of [1], we now have
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4
Also add in such a fragment for kunit itself so we can give that as an
example more close to home (and thus less likely to be accidentally
broken).
[1] https://lore.kernel.org/linux-ext4/YCNF4yP1dB97zzwD@mit.edu/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Before:
> Expected str == "world", but
> str == hello
> "world" == world
After:
> Expected str == "world", but
> str == "hello"
<we don't need to tell the user that "world" == "world">
Note: like the literal ellision for integers, this doesn't handle the
case of
KUNIT_EXPECT_STREQ(test, "hello", "world")
since we don't expect it to realistically happen in checked in tests.
(If you really wanted a test to fail, KUNIT_FAIL("msg") exists)
In that case, you'd get:
> Expected "hello" == "world", but
<output for next failure>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set bug_get_file_line()'s output parameter values directly rather than
first nullifying them and then conditionally setting new values.
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-4-ascull@google.com
|
|
There is some non-trivial config-based logic to get the file name and
line number associated with a bug. Factor this out to a getter that can
be resused.
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-3-ascull@google.com
|
|
report_bug() will return early if it cannot find a bug corresponding to
the provided address. The subsequent test for the bug will always be
true so remove it.
Fixes: 1b4cfe3c0a30d ("lib/bug.c: exclude non-BUG/WARN exceptions from report_bug()")
Signed-off-by: Andrew Scull <ascull@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210318143311.839894-2-ascull@google.com
|
|
Splitting an order-4 entry into order-2 entries would leave the array
containing pointers to 000040008000c000 instead of 000044448888cccc.
This is a one-character fix, but enhance the test suite to check this
case.
Reported-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
I wrote the documentation backwards; the new order of the entry is stored
in the xas and the caller passes the old entry.
Reported-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
|
|
Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sprintf() is declared with a restrict keyword to not allow input and
output to point to the same buffer:
lib/test_rhashtable.c: In function 'print_ht':
lib/test_rhashtable.c:504:4: error: 'sprintf' argument 3 overlaps destination object 'buff' [-Werror=restrict]
504 | sprintf(buff, "%s\nbucket[%d] -> ", buff, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/test_rhashtable.c:489:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
489 | char buff[512] = "";
| ^~~~
Rework this function to remember the last offset instead to
avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tidy up code by fixing the following checkpatch warnings:
CHECK: Alignment should match open parenthesis
CHECK: Lines should not end with a '('
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|