| Age | Commit message (Collapse) | Author |
|---|
|
Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.
This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.
Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
-EEXIST from install_breakpoint() no longer makes sense, all
callers should simply treat it as "success". Change the code
to return zero and simplify register_for_each_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
fatal_signal_pending()
Once install_breakpoint() fails uprobe_mmap() "ignores" all other
uprobes and returns the error.
It was never really needed to to stop after the first error, and
in fact it was always wrong at least in -ENOTSUPP case.
Change uprobe_mmap() to ignore the errors and always return 0.
This is not what we want in the long term, but until we teach
the callers to handle the failure it would be better to remove
the pointless complications. And this doesn't look too bad, the
only "reasonable" error is ENOMEM but in this case the caller
should be oom-killed in the likely case or the system has more
serious problems.
However it makes sense to stop if fatal_signal_pending() == T.
In particular this helps if the task was oom-killed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
1. Kill dup_mmap()->uprobe_mmap(), it was only needed to calculate
new_mm->uprobes_state.count removed by the previous patch.
If the forking process has a pending uprobe (int3) in vma, it will
be copied by copy_page_range(), note that it checks vma->anon_vma
so "Don't copy ptes" is not possible after install_breakpoint()
which does anon_vma_prepare().
2. Remove is_swbp_at_addr() and "int count" in uprobe_mmap(). Again,
this was needed for uprobes_state.count.
As a side effect this fixes the bug pointed out by Srikar,
this code lacked the necessary put_uprobe().
3. uprobe_munmap() becomes a nop after the previous patch. Remove the
meaningless code but do not remove the helper, we will need it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:
- uprobe_mmap() can race with uprobe_unregister() and wrongly
increment the counter if it hits the non-uprobe "int3". Note
that install_breakpoint() checks ->consumers first and returns
-EEXIST if it is NULL.
"atomic_sub() if error" in uprobe_mmap() looks obviously wrong
too.
- uprobe_munmap() can race with uprobe_register() and wrongly
decrement the counter by the same reason.
- Suppose an appication tries to increase the mmapped area via
sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
this can nullify the counter temporarily and race with another
thread which can hit the bp, the application will be killed by
SIGTRAP.
- Suppose an application mmaps 2 consecutive areas in the same file
and one (or both) of these areas has uprobes. In the likely case
mmap_region()->vma_merge() suceeds. Like above, this leads to
uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
mmap_region() does another uprobe_mmap(resulting_vma) and doubles
the counter.
This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
by the time we get here (after we pass cleanup_ret) uprobe is always is
set. If it is NULL we leave very early in the code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Since read_opcode() reads from the referenced page and doesnt modify
the page contents nor the page attributes, there is no need to lock
the page.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Pick up the latest fixes because upcoming uprobes changes will rely on it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree contains misc fixlets: a perf script python binding fix, a
uprobes fix and a syscall tracing fix."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Add missing files to build the python binding
uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails
tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
|
|
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Andreas Schwab noticed that the 1 << tk->shift could overflow if the
shift value was greater than 30, since 1 would be a 32bit long on
32bit architectures. This issue was introduced by 1e75fa8be (time:
Condense timekeeper.xtime into xtime_sec)
Use 1ULL instead to ensure we don't overflow on the shift.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
arch_gettimeoffset returns a u32 value which when shifted by tk->shift
can overflow. This issue was introduced with 1e75fa8be (time: Condense
timekeeper.xtime into xtime_sec)
Cast it to u64 first.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Andreas noticed problems with resume on specific hardware after commit
1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined
with commit b44d50dca (time: Fix casting issue in tk_set_xtime and
tk_xtime_add)
After some digging I realized we aren't normalizing the timekeeper
after the add. Add the missing normalize call.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull audit-tree fixes from Miklos Szeredi:
"The audit subsystem maintainers (Al and Eric) are not responding to
repeated resends. Eric did ack them a while ago, but no response
since then. So I'm sending these directly to you."
* 'audit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
audit: clean up refcounting in audit-tree
audit: fix refcounting in audit-tree
audit: don't free_chunk() after fsnotify_add_mark()
|
|
It seems commit 4a9d4b024a31 ("switch fput to task_work_add") re-
introduced the problem addressed in 944be0b22472 ("close_files(): add
scheduling point")
If a server process with a lot of files (say 2 million tcp sockets) is
killed, we can spend a lot of time in task_work_run() and trigger a soft
lockup.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent
Pull syscall tracing fix from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=843640
If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path
does unmap_region() but does not remove the soon-to-be-freed vma
from rb tree. Actually there are more problems but this is how
William noticed this bug.
Perhaps we could do do_munmap() + return in this case, but in
fact it is simply wrong to abort if uprobe_mmap() fails. Until
at least we move the !UPROBE_COPY_INSN code from
install_breakpoint() to uprobe_register().
For example, uprobe_mmap()->install_breakpoint() can fail if the
probed insn is not supported (remember, uprobe_register()
succeeds if nobody mmaps inode/offset), mmap() should not fail
in this case.
dup_mmap()->uprobe_mmap() is wrong too by the same reason,
fork() can race with uprobe_register() and fail for no reason if
it wins the race and does install_breakpoint() first.
And, if nothing else, both mmap_region() and dup_mmap() return
success if uprobe_mmap() fails. Change them to ignore the error
code from uprobe_mmap().
Reported-and-tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.5
Cc: Anton Arapov <anton@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
Pull ftrace fixlets from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core
Pull ftrace updates from Steve Rostedt:
" This patch series extends ftrace function tracing utility to be
more dynamic for its users. It allows for data passing to the callback
functions, as well as reading regs as if a breakpoint were to trigger
at function entry.
The main goal of this patch series was to allow kprobes to use ftrace
as an optimized probe point when a probe is placed on an ftrace nop.
With lots of help from Masami Hiramatsu, and going through lots of
iterations, we finally came up with a good solution. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix migration thread runtime bogosity
sched,rt: fix isolated CPUs leaving root_task_group indefinitely throttled
sched,cgroup: Fix up task_groups list
sched: fix divide by zero at {thread_group,task}_times
sched, cgroup: Reduce rq->lock hold times for large cgroup hierarchies
|
|
Merge alpha architecture update from Michael Cree:
"The Alpha Maintainer, Matt Turner, is currently unavailable, so I have
collected up patches that have been posted to the linux-alpha mailing
list over the last couple of months, and are forwarding them to you in
the hope that you are prepared to accept them via me.
The patches by Al Viro and myself I have been running against kernels
for two months now so have had quite a bit of testing. All except one
patch were intended for the 3.5 kernel but because of Matt's
unavailability never got forwarded to you."
* emailed patches from Michael Cree <mcree@orcon.net.nz>: (9 commits)
alpha: Fix fall-out from disintegrating asm/system.h
Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts
alpha: fix fpu.h usage in userspace
alpha/mm/fault.c: Port OOM changes to do_page_fault
alpha: take kernel_execve() out of entry.S
alpha: take a bunch of syscalls into osf_sys.c
alpha: Use new generic strncpy_from_user() and strnlen_user()
alpha: Wire up cross memory attach syscalls
alpha: Don't export SOCK_NONBLOCK to user space.
|
|
New helper: current_thread_info(). Allows to do a bunch of odd syscalls
in C. While we are at it, there had never been a reason to do
osf_getpriority() in assembler. We also get "namespace"-aware (read:
consistent with getuid(2), etc.) behaviour from getx?id() syscalls now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syscall_get_nr can return -1 in the case that the task is not executing
a system call.
This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.
Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com
Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Unexpected behavior could occur if the time is set to a value large
enough to overflow a 64bit ktime_t (which is something larger then the
year 2262).
Also unexpected behavior could occur if large negative offsets are
injected via adjtimex.
So this patch improves the sanity check timekeeping inputs by
improving the timespec_valid() check, and then makes better use of
timespec_valid() to make sure we don't set the time to an invalid
negative value or one that overflows ktime_t.
Note: This does not protect from setting the time close to overflowing
ktime_t and then letting natural accumulation cause the overflow.
Reported-by: CAI Qian <caiqian@redhat.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1344454580-17031-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Drop the initial reference by fsnotify_init_mark early instead of
audit_tree_freeing_mark() at destroy time.
In the cases we destroy the mark before we drop the initial reference we need to
get rid of the get_mark that balances the put_mark in audit_tree_freeing_mark().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
Refcounting of fsnotify_mark in audit tree is broken. E.g:
refcount
create_chunk
alloc_chunk 1
fsnotify_add_mark 2
untag_chunk
fsnotify_get_mark 3
fsnotify_destroy_mark
audit_tree_freeing_mark 2
fsnotify_put_mark 1
fsnotify_put_mark 0
via destroy_list
fsnotify_mark_destroy -1
This was reported by various people as triggering Oops when stopping auditd.
We could just remove the put_mark from audit_tree_freeing_mark() but that would
break freeing via inode destruction. So this patch simply omits a put_mark
after calling destroy_mark or adds a get_mark before.
The additional get_mark is necessary where there's no other put_mark after
fsnotify_destroy_mark() since it assumes that the caller is holding a reference
(or the inode is keeping the mark pinned, not the case here AFAICS).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Valentin Avram <aval13@gmail.com>
Reported-by: Peter Moody <pmoody@google.com>
Acked-by: Eric Paris <eparis@redhat.com>
CC: stable@vger.kernel.org
|
|
Don't do free_chunk() after fsnotify_add_mark(). That one does a delayed unref
via the destroy list and this results in use-after-free.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
CC: stable@vger.kernel.org
|
|
Make stop scheduler class do the same accounting as other classes,
Migration threads can be caught in the act while doing exec balancing,
leading to the below due to use of unmaintained ->se.exec_start. The
load that triggered this particular instance was an apparently out of
control heavily threaded application that does system monitoring in
what equated to an exec bomb, with one of the VERY frequently migrated
tasks being ps.
%CPU PID USER CMD
99.3 45 root [migration/10]
97.7 53 root [migration/12]
97.0 57 root [migration/13]
90.1 49 root [migration/11]
89.6 65 root [migration/15]
88.7 17 root [migration/3]
80.4 37 root [migration/8]
78.1 41 root [migration/9]
44.2 13 root [migration/2]
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344051854.6739.19.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Root task group bandwidth replenishment must service all CPUs, regardless of
where the timer was last started, and regardless of the isolation mechanism,
lest 'Quoth the Raven, "Nevermore"' become rt scheduling policy.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344326558.6968.25.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
With multiple instances of task_groups, for_each_rt_rq() is a noop,
no task groups having been added to the rt.c list instance. This
renders __enable/disable_runtime() and print_rt_stats() noop, the
user (non) visible effect being that rt task groups are missing in
/proc/sched_debug.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: stable@kernel.org # v3.3+
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344308413.6846.7.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
On architectures where cputime_t is 64 bit type, is possible to trigger
divide by zero on do_div(temp, (__force u32) total) line, if total is a
non zero number but has lower 32 bit's zeroed. Removing casting is not
a good solution since some do_div() implementations do cast to u32
internally.
This problem can be triggered in practice on very long lived processes:
PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin"
#0 [ffff880472a51b70] machine_kexec at ffffffff8103214b
#1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2
#2 [ffff880472a51ca0] oops_end at ffffffff814f0b00
#3 [ffff880472a51cd0] die at ffffffff8100f26b
#4 [ffff880472a51d00] do_trap at ffffffff814f03f4
#5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff
#6 [ffff880472a51e00] divide_error at ffffffff8100be7b
[exception RIP: thread_group_times+0x56]
RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046
RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad
RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc
RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800
R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08
R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff880472a51f00] do_sys_times at ffffffff8108845d
#8 [ffff880472a51f40] sys_times at ffffffff81088524
#9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2
RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202
RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000
RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0
RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b
R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940
R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940
ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Peter Portante reported that for large cgroup hierarchies (and or on
large CPU counts) we get immense lock contention on rq->lock and stuff
stops working properly.
His workload was a ton of processes, each in their own cgroup,
everybody idling except for a sporadic wakeup once every so often.
It was found that:
schedule()
idle_balance()
load_balance()
local_irq_save()
double_rq_lock()
update_h_load()
walk_tg_tree(tg_load_down)
tg_load_down()
Results in an entire cgroup hierarchy walk under rq->lock for every
new-idle balance and since new-idle balance isn't throttled this
results in a lot of work while holding the rq->lock.
This patch does two things, it removes the work from under rq->lock
based on the good principle of race and pray which is widely employed
in the load-balancer as a whole. And secondly it throttles the
update_h_load() calculation to max once per jiffy.
I considered excluding update_h_load() for new-idle balance
all-together, but purely relying on regular balance passes to update
this data might not work out under some rare circumstances where the
new-idle busiest isn't the regular busiest for a while (unlikely, but
a nightmare to debug if someone hits it and suffers).
Cc: pjt@google.com
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Reported-by: Peter Portante <pportant@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-aaarrzfpnaam7pqrekofu8a6@git.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael J. Wysocki:
- Fix for two recent regressions in the generic PM domains framework.
- Revert of a commit that introduced a resume regression and is
conceptually incorrect in my opinion.
- Fix for a return value in pcc-cpufreq.c from Julia Lawall.
- RTC wakeup signaling fix from Neil Brown.
- Suppression of compiler warnings for CONFIG_PM_SLEEP unset in ACPI,
platform/x86 and TPM drivers.
* tag 'pm-for-3.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tpm_tis / PM: Fix unused function warning for CONFIG_PM_SLEEP
platform / x86 / PM: Fix unused function warnings for CONFIG_PM_SLEEP
ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEP
Revert "NMI watchdog: fix for lockup detector breakage on resume"
PM: Make dev_pm_get_subsys_data() always return 0 on success
drivers/cpufreq/pcc-cpufreq.c: fix error return code
RTC: Avoid races between RTC alarm wakeup and suspend.
|
|
While tracking down a weird buffer overflow issue in a program that
looked to be sane, I started double checking the length returned by
syslog(SYSLOG_ACTION_READ_ALL, ...) to make sure it wasn't overflowing
the buffer.
Sure enough, it was. I saw this in strace:
11339 syslog(SYSLOG_ACTION_READ_ALL, "<5>[244017.708129] REISERFS (dev"..., 8192) = 8279
It turns out that the loops that calculate how much space the entries
will take when they're copied don't include the newlines and prefixes
that will be included in the final output since prev flags is passed as
zero.
This patch properly accounts for it and fixes the overflow.
CC: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introducing following bits to the the perf_event_attr struct:
- exclude_callchain_kernel to filter out kernel callchain
from the sample dump
- exclude_callchain_user to filter out user callchain
from the sample dump
We need to be able to disable standard user callchain dump when we use
the dwarf cfi callchain mode, because frame pointer based user
callchains are useless in this mode.
Implementing also exclude_callchain_kernel to have complete set of
options.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[ Added kernel callchains filtering ]
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-7-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.
Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.
Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples. This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introducing perf_output_skip function to be able to skip data within the
perf ring buffer.
When writing data into perf ring buffer we first reserve needed place in
ring buffer and then copy the actual data.
There's a possibility we won't be able to fill all the reserved size
with data, so we need a way to skip the remaining bytes.
This is going to be useful when storing the user stack dump, where we
might end up with less data than we originally requested.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding a generic way to use __output_copy function with specific copy
function via DEFINE_PERF_OUTPUT_COPY macro.
Using this to add new __output_copy_user function, that provides output
copy from user pointers. For x86 the copy_from_user_nmi function is used
and __copy_from_user_inatomic for the rest of the architectures.
This new function will be used in user stack dump on sample, coming in
next patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-4-git-send-email-jolsa@redhat.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introducing PERF_SAMPLE_REGS_USER sample type bit to trigger the dump of
user level registers on sample. Registers we want to dump are specified
by sample_regs_user bitmask.
Only user level registers are dumped at the moment. Meaning the register
values of the user space context as it was before the user entered the
kernel for whatever reason (syscall, irq, exception, or a PMI happening
in userspace).
The layout of the sample_regs_user bitmap is described in
asm/perf_regs.h for archs that support register dump.
This is going to be useful to bring Dwarf CFI based stack unwinding on
top of samples.
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
[ Dump registers ABI specification. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Revert commit 45226e9 (NMI watchdog: fix for lockup detector breakage
on resume) which breaks resume from system suspend on my SH7372
Mackerel board (by causing a NULL pointer dereference to happen) and
is generally wrong, because it abuses the CPU hotplug functionality
in a shamelessly blatant way.
The original issue should be addressed through appropriate syscore
resume callback instead.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Fix some typos in kernel/trace.
Link: http://lkml.kernel.org/r/1343887320.2228.9.camel@louis-ThinkPad-T410
Signed-off-by: Wang Tianhong <wangthbj@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add missing initialization for ret variable. Its initialization
is based on the re_cnt variable, which is being set deep down
in the ftrace_function_filter_re function.
I'm not sure compilers would be smart enough to see this in near
future, so killing the warning this way.
Link: http://lkml.kernel.org/r/1340120894-9465-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The warkeup_rt self test used msleep() calls to wait for real time
tasks to wake up and run. On bare-metal hardware, this was enough as
the scheduler should let the RT task run way before the non-RT task
wakes up from the msleep(). If it did not, then that would mean the
scheduler was broken.
But when dealing with virtual machines, this is a different story.
If the RT task wakes up on a VCPU, it's up to the host to decide when
that task gets to schedule, which can be far behind the time that the
non-RT task wakes up. In this case, the test would fail incorrectly.
As we are not testing the scheduler, but instead the wake up tracing,
we can use completions to wait and not depend on scheduler timings
to see if events happen on time.
Link: http://lkml.kernel.org/r/1343663105.3847.7.camel@fedora
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Tetsuo Handa reported that sporadically the system clock starts
counting up too quickly which is enough to confuse the hangcheck
timer to print a bogus stall warning.
Commit 2a8c0883 "time: Move xtime_nsec adjustment underflow handling
timekeeping_adjust" overlooked this exit path:
} else
return;
which should really be a proper exit sequence, fixing the bug as a
side effect.
Also make the flow more readable by properly balancing curly
braces.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> wrote:
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> wrote:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: john.stultz@linaro.org
Cc: a.p.zijlstra@chello.nl
Cc: richardcochran@gmail.com
Cc: prarit@redhat.com
Link: http://lkml.kernel.org/r/20120804192114.GA28347@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
