| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "fixes of TLB batching races", v6.
It turns out that Linux TLB batching mechanism suffers from various
races. Races that are caused due to batching during reclamation were
recently handled by Mel and this patch-set deals with others. The more
fundamental issue is that concurrent updates of the page-tables allow
for TLB flushes to be batched on one core, while another core changes
the page-tables. This other core may assume a PTE change does not
require a flush based on the updated PTE value, while it is unaware that
TLB flushes are still pending.
This behavior affects KSM (which may result in memory corruption) and
MADV_FREE and MADV_DONTNEED (which may result in incorrect behavior). A
proof-of-concept can easily produce the wrong behavior of MADV_DONTNEED.
Memory corruption in KSM is harder to produce in practice, but was
observed by hacking the kernel and adding a delay before flushing and
replacing the KSM page.
Finally, there is also one memory barrier missing, which may affect
architectures with weak memory model.
This patch (of 7):
Setting and clearing mm->tlb_flush_pending can be performed by multiple
threads, since mmap_sem may only be acquired for read in
task_numa_work(). If this happens, tlb_flush_pending might be cleared
while one of the threads still changes PTEs and batches TLB flushes.
This can lead to the same race between migration and
change_protection_range() that led to the introduction of
tlb_flush_pending. The result of this race was data corruption, which
means that this patch also addresses a theoretically possible data
corruption.
An actual data corruption was not observed, yet the race was was
confirmed by adding assertion to check tlb_flush_pending is not set by
two threads, adding artificial latency in change_protection_range() and
using sysctl to reduce kernel.numa_balancing_scan_delay_ms.
Link: http://lkml.kernel.org/r/20170802000818.4760-2-namit@vmware.com
Fixes: 20841405940e ("mm: fix TLB flush race between migration, and
change_protection_range")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As Tetsuo points out:
"Commit 385386cff4c6 ("mm: vmstat: move slab statistics from zone to
node counters") broke "Slab:" field of /proc/meminfo . It shows nearly
0kB"
In addition to /proc/meminfo, this problem also affects the slab
counters OOM/allocation failure info dumps, can cause early -ENOMEM from
overcommit protection, and miscalculate image size requirements during
suspend-to-disk.
This is because the patch in question switched the slab counters from
the zone level to the node level, but forgot to update the global
accessor functions to read the aggregate node data instead of the
aggregate zone data.
Use global_node_page_state() to access the global slab counters.
Fixes: 385386cff4c6 ("mm: vmstat: move slab statistics from zone to node counters")
Link: http://lkml.kernel.org/r/20170801134256.5400-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 65d8fc777f6d ("futex: Remove requirement for lock_page() in
get_futex_key()") removed an unnecessary lock_page() with the
side-effect that page->mapping needed to be treated very carefully.
Two defensive warnings were added in case any assumption was missed and
the first warning assumed a correct application would not alter a
mapping backing a futex key. Since merging, it has not triggered for
any unexpected case but Mark Rutland reported the following bug
triggering due to the first warning.
kernel BUG at kernel/futex.c:679!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
Hardware name: linux,dummy-virt (DT)
task: ffff80001e271780 task.stack: ffff000010908000
PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145
The fact that it's a bug instead of a warning was due to an unrelated
arm64 problem, but the warning itself triggered because the underlying
mapping changed.
This is an application issue but from a kernel perspective it's a
recoverable situation and the warning is unnecessary so this patch
removes the warning. The warning may potentially be triggered with the
following test program from Mark although it may be necessary to adjust
NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
system.
#include <linux/futex.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/time.h>
#include <unistd.h>
#define NR_FUTEX_THREADS 16
pthread_t threads[NR_FUTEX_THREADS];
void *mem;
#define MEM_PROT (PROT_READ | PROT_WRITE)
#define MEM_SIZE 65536
static int futex_wrapper(int *uaddr, int op, int val,
const struct timespec *timeout,
int *uaddr2, int val3)
{
syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
}
void *poll_futex(void *unused)
{
for (;;) {
futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
}
}
int main(int argc, char *argv[])
{
int i;
mem = mmap(NULL, MEM_SIZE, MEM_PROT,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
printf("Mapping @ %p\n", mem);
printf("Creating futex threads...\n");
for (i = 0; i < NR_FUTEX_THREADS; i++)
pthread_create(&threads[i], NULL, poll_futex, NULL);
printf("Flipping mapping...\n");
for (;;) {
mmap(mem, MEM_SIZE, MEM_PROT,
MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
}
return 0;
}
Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The latest change of compat_sys_sigpending in commit 8f13621abced
("sigpending(): move compat to native") has broken it in two ways.
First, it tries to write 4 bytes more than userspace expects:
sizeof(old_sigset_t) == sizeof(long) == 8 instead of
sizeof(compat_old_sigset_t) == sizeof(u32) == 4.
Second, on big endian architectures these bytes are being written in the
wrong order.
This bug was found by strace test suite.
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Fixes: 8f13621abced ("sigpending(): move compat to native")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a multiplication overflow in the timer code on 32bit
systems"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix overflow in get_next_timer_interrupt
|
|
In codepaths that use the begin/retry interface for reading
mems_allowed_seq with irqs disabled, there exists a race condition that
stalls the patch process after only modifying a subset of the
static_branch call sites.
This problem manifested itself as a deadlock in the slub allocator,
inside get_any_partial. The loop reads mems_allowed_seq value (via
read_mems_allowed_begin), performs the defrag operation, and then
verifies the consistency of mem_allowed via the read_mems_allowed_retry
and the cookie returned by xxx_begin.
The issue here is that both begin and retry first check if cpusets are
enabled via cpusets_enabled() static branch. This branch can be
rewritted dynamically (via cpuset_inc) if a new cpuset is created. The
x86 jump label code fully synchronizes across all CPUs for every entry
it rewrites. If it rewrites only one of the callsites (specifically the
one in read_mems_allowed_retry) and then waits for the
smp_call_function(do_sync_core) to complete while a CPU is inside the
begin/retry section with IRQs off and the mems_allowed value is changed,
we can hang.
This is because begin() will always return 0 (since it wasn't patched
yet) while retry() will test the 0 against the actual value of the seq
counter.
The fix is to use two different static keys: one for begin
(pre_enable_key) and one for retry (enable_key). In cpuset_inc(), we
first bump the pre_enable key to ensure that cpuset_mems_allowed_begin()
always return a valid seqcount if are enabling cpusets. Similarly, when
disabling cpusets via cpuset_dec(), we first ensure that callers of
cpuset_mems_allowed_retry() will start ignoring the seqcount value
before we let cpuset_mems_allowed_begin() return 0.
The relevant stack traces of the two stuck threads:
CPU: 1 PID: 1415 Comm: mkdir Tainted: G L 4.9.36-00104-g540c51286237 #4
Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
task: ffff8817f9c28000 task.stack: ffffc9000ffa4000
RIP: smp_call_function_many+0x1f9/0x260
Call Trace:
smp_call_function+0x3b/0x70
on_each_cpu+0x2f/0x90
text_poke_bp+0x87/0xd0
arch_jump_label_transform+0x93/0x100
__jump_label_update+0x77/0x90
jump_label_update+0xaa/0xc0
static_key_slow_inc+0x9e/0xb0
cpuset_css_online+0x70/0x2e0
online_css+0x2c/0xa0
cgroup_apply_control_enable+0x27f/0x3d0
cgroup_mkdir+0x2b7/0x420
kernfs_iop_mkdir+0x5a/0x80
vfs_mkdir+0xf6/0x1a0
SyS_mkdir+0xb7/0xe0
entry_SYSCALL_64_fastpath+0x18/0xad
...
CPU: 2 PID: 1 Comm: init Tainted: G L 4.9.36-00104-g540c51286237 #4
Hardware name: Default string Default string/Hardware, BIOS 4.29.1-20170526215256 05/26/2017
task: ffff8818087c0000 task.stack: ffffc90000030000
RIP: int3+0x39/0x70
Call Trace:
<#DB> ? ___slab_alloc+0x28b/0x5a0
<EOE> ? copy_process.part.40+0xf7/0x1de0
__slab_alloc.isra.80+0x54/0x90
copy_process.part.40+0xf7/0x1de0
copy_process.part.40+0xf7/0x1de0
kmem_cache_alloc_node+0x8a/0x280
copy_process.part.40+0xf7/0x1de0
_do_fork+0xe7/0x6c0
_raw_spin_unlock_irq+0x2d/0x60
trace_hardirqs_on_caller+0x136/0x1d0
entry_SYSCALL_64_fastpath+0x5/0xad
do_syscall_64+0x27/0x350
SyS_clone+0x19/0x20
do_syscall_64+0x60/0x350
entry_SYSCALL64_slow_path+0x25/0x25
Link: http://lkml.kernel.org/r/20170731040113.14197-1-dmitriyz@waymo.com
Fixes: 46e700abc44c ("mm, page_alloc: remove unnecessary taking of a seqlock when cpusets are disabled")
Signed-off-by: Dima Zavin <dmitriyz@waymo.com>
Reported-by: Cliff Spradlin <cspradlin@waymo.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 3d375d78593c ("mm: update callers to use HASH_ZERO flag"),
drop unused pidhash_size in pidhash_init().
Link: http://lkml.kernel.org/r/1500389267-49222-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Pavel Tatashin <Pasha.Tatashin@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For e.g. HZ=100, timer being 430 jiffies in the future, and 32 bit
unsigned int, there is an overflow on unsigned int right-hand side
of the expression which results with wrong values being returned.
Type cast the multiplier to 64bit to avoid that issue.
Fixes: 46c8f0b077a8 ("timers: Fix get_next_timer_interrupt() computation")
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: khilman@baylibre.com
Cc: akpm@linux-foundation.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a7900f04-2a21-c9fd-67be-ab334d459ee5@nokia.com
|
|
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Several cgroup bug fixes.
- cgroup core was calling a migration callback on empty migrations,
which could make cpuset crash.
- There was a very subtle bug where the controller interface files
aren't created directly when cgroup2 is mounted. Because later
operations create them, this bug didn't get noticed earlier.
- Failed writes to cgroup.subtree_control were incorrectly returning
zero"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix error return value from cgroup_subtree_control()
cgroup: create dfl_root files on subsys registration
cgroup: don't call migration methods if there are no tasks to migrate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Two notable fixes.
- While adding NUMA affinity support to unbound workqueues, the
assumption that an unbound workqueue with max_active == 1 is
ordered was broken.
The plan was to use explicit alloc_ordered_workqueue() for those
cases. Unfortunately, I forgot to update the documentation properly
and we grew a handful of use cases which depend on that assumption.
While we want to convert them to alloc_ordered_workqueue(), we
don't really lose anything by enforcing ordered execution on
unbound max_active == 1 workqueues and it doesn't make sense to
risk subtle bugs. Restore the assumption.
- Workqueue assumes that CPU <-> NUMA node mapping remains static.
This is a general assumption - we don't have any synchronization
mechanism around CPU <-> node mapping. Unfortunately, powerpc may
change the mapping dynamically leading to crashes. Michael added a
workaround so that we at least don't crash while powerpc hotplug
code gets updated"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Work around edge cases for calc of pool's cpumask
workqueue: implicit ordered attribute should be overridable
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two patches addressing build warnings caused by inconsistent kernel
doc comments"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/wait: Clean up some documentation warnings
sched/core: Fix some documentation build warnings
|
|
bpf_prog_size(prog->len) is not the correct length we want to dump
back to user space. The code in bpf_prog_get_info_by_fd() uses this
to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also
includes the size of struct bpf_prog itself plus program instructions
and is usually used either in context of accounting or for bpf_prog_alloc()
et al, thus we copy out of bounds in bpf_prog_get_info_by_fd()
potentially. Use the correct bpf_prog_insn_size() instead.
Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior
check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so
user space can be notified of buggy behavior.
Fixes: 1e2709769086 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is an underlying assumption/trade-off in many layers of the Linux
system that CPU <-> node mapping is static. This is despite the presence
of features like NUMA and 'hotplug' that support the dynamic addition/
removal of fundamental system resources like CPUs and memory. PowerPC
systems, however, do provide extensive features for the dynamic change
of resources available to a system.
Currently, there is little or no synchronization protection around the
updating of the CPU <-> node mapping, and the export/update of this
information for other layers / modules. In systems which can change
this mapping during 'hotplug', like PowerPC, the information is changing
underneath all layers that might reference it.
This patch attempts to ensure that a valid, usable cpumask attribute
is used by the workqueue infrastructure when setting up new resource
pools. It prevents a crash that has been observed when an 'empty'
cpumask is passed along to the worker/task scheduling code. It is
intended as a temporary workaround until a more fundamental review and
correction of the issue can be done.
[With additions to the patch provided by Tejun Hao <tj@kernel.org>]
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
That commit was part of the changes moving x86 to the generic CPU hotplug
interrupt migration code. The force flag was required on x86 before the
hierarchical irqdomain rework, but invoking set_affinity() with force=true
stayed and had no side effects.
At some point in the past, the force flag got repurposed to support the
exynos timer interrupt affinity setting to a not yet online CPU, so the
interrupt controller callback does not verify the supplied affinity mask
against cpu_online_mask.
Setting the flag in the CPU hotplug code causes the cpu online masking to
be blocked on these irq controllers and results in potentially affining an
interrupt to the CPU which is unplugged, i.e. instead of moving it away,
it's just reassigned to it.
As the force flags is not longer needed on x86, it's safe to revert that
patch so the ARM irqchips which use the force flag work again.
Add comments to that effect, so this won't happen again.
Note: The online mask handling should be done in the generic code and the
force flag and the masking in the irq chips removed all together, but
that's not a change possible for 4.13.
Fixes: 77f85e66aa8b ("genirq/cpuhotplug: Set force affinity flag on hotplug migration")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707271217590.3109@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
|
|
The kerneldoc comments for try_to_wake_up_local() were out of date, leading
to these documentation build warnings:
./kernel/sched/core.c:2080: warning: No description found for parameter 'rf'
./kernel/sched/core.c:2080: warning: Excess function parameter 'cookie' description in 'try_to_wake_up_local'
Update the comment to reflect current reality and give us some peace and
quiet.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20170724135628.695cecfc@lwn.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We have to subtract the src max from the dst min, and vice-versa, since
(e.g.) the smallest result comes from the largest subtrahend.
Fixes: 484611357c19 ("bpf: allow access into map value arrays")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While refactoring, f7b2814bb9b6 ("cgroup: factor out
cgroup_{apply|finalize}_control() from
cgroup_subtree_control_write()") broke error return value from the
function. The return value from the last operation is always
overridden to zero. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three minor updates
- Use the new GFP_RETRY_MAYFAIL to be more aggressive in allocating
memory for the ring buffer without causing OOMs
- Fix a memory leak in adding and removing instances
- Add __rcu annotation to be able to debug RCU usage of function
tracing a bit better"
* tag 'trace-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
trace: fix the errors caused by incompatible type of RCU variables
tracing: Fix kmemleak in instance_rmdir
tracing/ring_buffer: Try harder to allocate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"A cputime fix and code comments/organization fix to the deadline
scheduler"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix confusing comments about selection of top pi-waiter
sched/cputime: Don't use smp_processor_id() in preemptible context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two hw-enablement patches, two race fixes, three fixes for regressions
of semantics, plus a number of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add proper condition to run sched_task callbacks
perf/core: Fix locking for children siblings group read
perf/core: Fix scheduling regression of pinned groups
perf/x86/intel: Fix debug_store reset field for freq events
perf/x86/intel: Add Goldmont Plus CPU PMU support
perf/x86/intel: Enable C-state residency events for Apollo Lake
perf symbols: Accept zero as the kernel base address
Revert "perf/core: Drop kernel samples even though :u is specified"
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
perf evsel: State in the default event name if attr.exclude_kernel is set
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixlet from Ingo Molnar:
"Remove an unnecessary priority adjustment in the rtmutex code"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Remove unnecessary priority adjustment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"A resume_irq() fix, plus a number of static declaration fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/digicolor: Drop unnecessary static
irqchip/mips-cpu: Drop unnecessary static
irqchip/gic/realview: Drop unnecessary static
irqchip/mips-gic: Remove population of irq domain names
genirq/PM: Properly pretend disabled state when force resuming interrupts
|
|
We're missing ctx lock when iterating children siblings
within the perf_read path for group reading. Following
race and crash can happen:
User space doing read syscall on event group leader:
T1:
perf_read
lock event->ctx->mutex
perf_read_group
lock leader->child_mutex
__perf_read_group_add(child)
list_for_each_entry(sub, &leader->sibling_list, group_entry)
----> sub might be invalid at this point, because it could
get removed via perf_event_exit_task_context in T2
Child exiting and cleaning up its events:
T2:
perf_event_exit_task_context
lock ctx->mutex
list_for_each_entry_safe(child_event, next, &child_ctx->event_list,...
perf_event_exit_event(child)
lock ctx->lock
perf_group_detach(child)
unlock ctx->lock
----> child is removed from sibling_list without any sync
with T1 path above
...
free_event(child)
Before the child is removed from the leader's child_list,
(and thus is omitted from perf_read_group processing), we
need to ensure that perf_read_group touches child's
siblings under its ctx->lock.
Peter further notes:
| One additional note; this bug got exposed by commit:
|
| ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
|
| which made it possible to actually trigger this code-path.
Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
|
|
Edward reported that there's an issue in min/max value bounds
tracking when signed and unsigned compares both provide hints
on limits when having unknown variables. E.g. a program such
as the following should have been rejected:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff8a94cda93400
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+7
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = -1
10: (2d) if r1 > r2 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
11: (65) if r1 s> 0x1 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
12: (0f) r0 += r1
13: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1
R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
14: (b7) r0 = 0
15: (95) exit
What happens is that in the first part ...
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = -1
10: (2d) if r1 > r2 goto pc+3
... r1 carries an unsigned value, and is compared as unsigned
against a register carrying an immediate. Verifier deduces in
reg_set_min_max() that since the compare is unsigned and operation
is greater than (>), that in the fall-through/false case, r1's
minimum bound must be 0 and maximum bound must be r2. Latter is
larger than the bound and thus max value is reset back to being
'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now
'R1=inv,min_value=0'. The subsequent test ...
11: (65) if r1 s> 0x1 goto pc+2
... is a signed compare of r1 with immediate value 1. Here,
verifier deduces in reg_set_min_max() that since the compare
is signed this time and operation is greater than (>), that
in the fall-through/false case, we can deduce that r1's maximum
bound must be 1, meaning with prior test, we result in r1 having
the following state: R1=inv,min_value=0,max_value=1. Given that
the actual value this holds is -8, the bounds are wrongly deduced.
When this is being added to r0 which holds the map_value(_adj)
type, then subsequent store access in above case will go through
check_mem_access() which invokes check_map_access_adj(), that
will then probe whether the map memory is in bounds based
on the min_value and max_value as well as access size since
the actual unknown value is min_value <= x <= max_value; commit
fce366a9dd0d ("bpf, verifier: fix alu ops against map_value{,
_adj} register types") provides some more explanation on the
semantics.
It's worth to note in this context that in the current code,
min_value and max_value tracking are used for two things, i)
dynamic map value access via check_map_access_adj() and since
commit 06c1c049721a ("bpf: allow helpers access to variable memory")
ii) also enforced at check_helper_mem_access() when passing a
memory address (pointer to packet, map value, stack) and length
pair to a helper and the length in this case is an unknown value
defining an access range through min_value/max_value in that
case. The min_value/max_value tracking is /not/ used in the
direct packet access case to track ranges. However, the issue
also affects case ii), for example, the following crafted program
based on the same principle must be rejected as well:
0: (b7) r2 = 0
1: (bf) r3 = r10
2: (07) r3 += -512
3: (7a) *(u64 *)(r10 -16) = -8
4: (79) r4 = *(u64 *)(r10 -16)
5: (b7) r6 = -1
6: (2d) if r4 > r6 goto pc+5
R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp
7: (65) if r4 s> 0x1 goto pc+4
R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512
R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1
R10=fp
8: (07) r4 += 1
9: (b7) r5 = 0
10: (6a) *(u16 *)(r10 -512) = 0
11: (85) call bpf_skb_load_bytes#26
12: (b7) r0 = 0
13: (95) exit
Meaning, while we initialize the max_value stack slot that the
verifier thinks we access in the [1,2] range, in reality we
pass -7 as length which is interpreted as u32 in the helper.
Thus, this issue is relevant also for the case of helper ranges.
Resetting both bounds in check_reg_overflow() in case only one
of them exceeds limits is also not enough as similar test can be
created that uses values which are within range, thus also here
learned min value in r1 is incorrect when mixed with later signed
test to create a range:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff880ad081fa00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+7
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = 2
10: (3d) if r2 >= r1 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
11: (65) if r1 s> 0x4 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
12: (0f) r0 += r1
13: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4
R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
14: (b7) r0 = 0
15: (95) exit
This leaves us with two options for fixing this: i) to invalidate
all prior learned information once we switch signed context, ii)
to track min/max signed and unsigned boundaries separately as
done in [0]. (Given latter introduces major changes throughout
the whole verifier, it's rather net-next material, thus this
patch follows option i), meaning we can derive bounds either
from only signed tests or only unsigned tests.) There is still the
case of adjust_reg_min_max_vals(), where we adjust bounds on ALU
operations, meaning programs like the following where boundaries
on the reg get mixed in context later on when bounds are merged
on the dst reg must get rejected, too:
0: (7a) *(u64 *)(r10 -8) = 0
1: (bf) r2 = r10
2: (07) r2 += -8
3: (18) r1 = 0xffff89b2bf87ce00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+6
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp
7: (7a) *(u64 *)(r10 -16) = -8
8: (79) r1 = *(u64 *)(r10 -16)
9: (b7) r2 = 2
10: (3d) if r2 >= r1 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp
11: (b7) r7 = 1
12: (65) if r7 s> 0x0 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp
13: (b7) r0 = 0
14: (95) exit
from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0
R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp
15: (0f) r7 += r1
16: (65) if r7 s> 0x4 goto pc+2
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
17: (0f) r0 += r7
18: (72) *(u8 *)(r0 +0) = 0
R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3
R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp
19: (b7) r0 = 0
20: (95) exit
Meaning, in adjust_reg_min_max_vals() we must also reset range
values on the dst when src/dst registers have mixed signed/
unsigned derived min/max value bounds with one unbounded value
as otherwise they can be added together deducing false boundaries.
Once both boundaries are established from either ALU ops or
compare operations w/o mixing signed/unsigned insns, then they
can safely be added to other regs also having both boundaries
established. Adding regs with one unbounded side to a map value
where the bounded side has been learned w/o mixing ops is
possible, but the resulting map value won't recover from that,
meaning such op is considered invalid on the time of actual
access. Invalid bounds are set on the dst reg in case i) src reg,
or ii) in case dst reg already had them. The only way to recover
would be to perform i) ALU ops but only 'add' is allowed on map
value types or ii) comparisons, but these are disallowed on
pointers in case they span a range. This is fine as only BPF_JEQ
and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers
which potentially turn them into PTR_TO_MAP_VALUE type depending
on the branch, so only here min/max value cannot be invalidated
for them.
In terms of state pruning, value_from_signed is considered
as well in states_equal() when dealing with adjusted map values.
With regards to breaking existing programs, there is a small
risk, but use-cases are rather quite narrow where this could
occur and mixing compares probably unlikely.
Joint work with Josef and Edward.
[0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html
Fixes: 484611357c19 ("bpf: allow access into map value arrays")
Reported-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull audit fix from Paul Moore:
"A small audit fix, just a single line, to plug a memory leak in some
audit error handling code"
* 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit:
audit: fix memleak in auditd_send_unicast_skb.
|
|
The variables which are processed by RCU functions should be annotated
as RCU, otherwise sparse will report the errors like below:
"error: incompatible types in comparison expression (different
address spaces)"
Link: http://lkml.kernel.org/r/1496823171-7758-1-git-send-email-zhang.chunyan@linaro.org
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[ Updated to not be 100% 80 column strict ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Hit the kmemleak when executing instance_rmdir, it forgot releasing
mem of tracing_cpumask. With this fix, the warn does not appear any
more.
unreferenced object 0xffff93a8dfaa7c18 (size 8):
comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s)
hex dump (first 8 bytes):
ff ff ff ff ff ff ff ff ........
backtrace:
[<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280
[<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30
[<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10
[<ffffffff88571ab0>] instance_mkdir+0x90/0x240
[<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70
[<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0
[<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100
[<ffffffff88403857>] do_syscall_64+0x67/0x150
[<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a
[<ffffffffffffffff>] 0xffffffffffffffff
Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com
Cc: stable@vger.kernel.org
Fixes: ccfe9e42e451 ("tracing: Make tracing_cpumask available for all instances")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Vince Weaver reported:
> I was tracking down some regressions in my perf_event_test testsuite.
> Some of the tests broke in the 4.11-rc1 timeframe.
>
> I've bisected one of them, this report is about
> tests/overflow/simul_oneshot_group_overflow
> This test creates an event group containing two sampling events, set
> to overflow to a signal handler (which disables and then refreshes the
> event).
>
> On a good kernel you get the following:
> Event perf::instructions with period 1000000
> Event perf::instructions with period 2000000
> fd 3 overflows: 946 (perf::instructions/1000000)
> fd 4 overflows: 473 (perf::instructions/2000000)
> Ending counts:
> Count 0: 946379875
> Count 1: 946365218
>
> With the broken kernels you get:
> Event perf::instructions with period 1000000
> Event perf::instructions with period 2000000
> fd 3 overflows: 938 (perf::instructions/1000000)
> fd 4 overflows: 318 (perf::instructions/2000000)
> Ending counts:
> Count 0: 946373080
> Count 1: 653373058
The root cause of the bug is that the following commit:
487f05e18a ("perf/core: Optimize event rescheduling on active contexts")
erronously assumed that event's 'pinned' setting determines whether the
event belongs to a pinned group or not, but in fact, it's the group
leader's pinned state that matters.
This was discovered by Vince in the test case described above, where two instruction
counters are grouped, the group leader is pinned, but the other event is not;
in the regressed case the counters were off by 33% (the difference between events'
periods), but should be the same within the error margin.
Fix the problem by looking at the group leader's pinning.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 487f05e18a ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/87lgnmvw7h.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull structure randomization updates from Kees Cook:
"Now that IPC and other changes have landed, enable manual markings for
randstruct plugin, including the task_struct.
This is the rest of what was staged in -next for the gcc-plugins, and
comes in three patches, largest first:
- mark "easy" structs with __randomize_layout
- mark task_struct with an optional anonymous struct to isolate the
__randomize_layout section
- mark structs to opt _out_ of automated marking (which will come
later)
And, FWIW, this continues to pass allmodconfig (normal and patched to
enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and
s390 for me"
* tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: opt-out externally exposed function pointer structs
task_struct: Allow randomized layout
randstruct: Mark various structs for randomization
|
|
The combination of WQ_UNBOUND and max_active == 1 used to imply
ordered execution. After NUMA affinity 4c16bd327c74 ("workqueue:
implement NUMA affinity for unbound workqueues"), this is no longer
true due to per-node worker pools.
While the right way to create an ordered workqueue is
alloc_ordered_workqueue(), the documentation has been misleading for a
long time and people do use WQ_UNBOUND and max_active == 1 for ordered
workqueues which can lead to subtle bugs which are very difficult to
trigger.
It's unlikely that we'd see noticeable performance impact by enforcing
ordering on WQ_UNBOUND / max_active == 1 workqueues. Let's
automatically set __WQ_ORDERED for those workqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: Alexei Potashnik <alexei@purestorage.com>
Fixes: 4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues")
Cc: stable@vger.kernel.org # v3.10+
|
|
Found this issue by kmemleak report, auditd_send_unicast_skb
did not free skb if rcu_dereference(auditd_conn) returns null.
unreferenced object 0xffff88082568ce00 (size 256):
comm "auditd", pid 1119, jiffies 4294708499
backtrace:
[<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8121820c>] kmem_cache_alloc_node+0xcc/0x210
[<ffffffff8161b99d>] __alloc_skb+0x5d/0x290
[<ffffffff8113c614>] audit_make_reply+0x54/0xd0
[<ffffffff8113dfa7>] audit_receive_msg+0x967/0xd70
----------------
(gdb) list *audit_receive_msg+0x967
0xffffffff8113dff7 is in audit_receive_msg (kernel/audit.c:1133).
1132 skb = audit_make_reply(0, AUDIT_REPLACE, 0,
0, &pvnr, sizeof(pvnr));
---------------
[<ffffffff8113e402>] audit_receive+0x52/0xa0
[<ffffffff8166c561>] netlink_unicast+0x181/0x240
[<ffffffff8166c8e2>] netlink_sendmsg+0x2c2/0x3b0
[<ffffffff816112e8>] sock_sendmsg+0x38/0x50
[<ffffffff816117a2>] SYSC_sendto+0x102/0x190
[<ffffffff81612f4e>] SyS_sendto+0xe/0x10
[<ffffffff8176d337>] entry_SYSCALL_64_fastpath+0x1a/0xa5
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
ftrace can fail to allocate per-CPU ring buffer on systems with a large
number of CPUs coupled while large amounts of cache happening in the
page cache. Currently the ring buffer allocation doesn't retry in the VM
implementation even if direct-reclaim made some progress but still
wasn't able to find a free page. On retrying I see that the allocations
almost always succeed. The retry doesn't happen because __GFP_NORETRY is
used in the tracer to prevent the case where we might OOM, however if we
drop __GFP_NORETRY, we risk destabilizing the system if OOM killer is
triggered. To prevent this situation, use the __GFP_RETRY_MAYFAIL flag
introduced recently [1].
Tested the following still succeeds without destabilizing a system with
1GB memory.
echo 300000 > /sys/kernel/debug/tracing/buffer_size_kb
[1] https://marc.info/?l=linux-mm&m=149820805124906&w=2
Link: http://lkml.kernel.org/r/20170713021416.8897-1-joelaf@google.com
Cc: Tim Murray <timmurray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
On subsystem registration, css_populate_dir() is not called on the new
root css, so the interface files for the subsystem on cgrp_dfl_root
aren't created on registration. This is a residue from the days when
cgrp_dfl_root was used only as the parking spot for unused subsystems,
which no longer is true as it's used as the root for cgroup2.
This is often fine as later operations tend to create them as a part
of mount (cgroup1) or subtree_control operations (cgroup2); however,
it's not difficult to mount cgroup2 with the controller interface
files missing as Waiman found out.
Fix it by invoking css_populate_dir() on the root css on subsys
registration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Interrupts with the IRQF_FORCE_RESUME flag set have also the
IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but
must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond
the suspension of device irqs. Force resume works by pretending that the
interrupt was disabled and then calling __irq_enable().
Incrementing the disabled depth counter was enough to do that, but with the
recent changes which use state flags to avoid unnecessary hardware access,
this is not longer sufficient. If the state flags are not set, then the
hardware callbacks are not invoked and the interrupt line stays disabled in
"hardware".
Set the disabled and masked state when pretending that an interrupt got
disabled by suspend.
Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"Fix the fallout from reworking the locking and resource management in
request/free_irq()"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Keep chip buslock across irq_request/release_resources()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP fix from Thomas Gleixner:
"Replace the bogus BUG_ON in the cpu hotplug code"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Replace BUG_ON and react useful
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a recently exposed issue in the PCI device wakeup code and
one older problem related to PCI device wakeup that has been reported
recently, modify one more piece of computations in intel_pstate to get
rid of a rounding error, fix a possible race in the schedutil cpufreq
governor, fix the device PM QoS sysfs interface to correctly handle
invalid user input, fix return values of two probe routines in devfreq
drivers and constify an attribute_group structure in devfreq.
Specifics:
- Avoid clearing the PCI PME Enable bit for devices as a result of
config space restoration which confuses AML executed afterward and
causes wakeup events to be lost on some systems (Rafael Wysocki).
- Fix the native PCIe PME interrupts handling in the cases when the
PME IRQ is set up as a system wakeup one so that runtime PM remote
wakeup works as expected after system resume on systems where that
happens (Rafael Wysocki).
- Fix the device PM QoS sysfs interface to handle invalid user input
correctly instead of using an unititialized variable value as the
latency tolerance for the device at hand (Dan Carpenter).
- Get rid of one more rounding error from intel_pstate computations
(Srinivas Pandruvada).
- Fix the schedutil cpufreq governor to prevent it from possibly
accessing unititialized data structures from governor callbacks in
some cases on systems when multiple CPUs share a single cpufreq
policy object (Vikram Mulukutla).
- Fix the return values of probe routines in two devfreq drivers
(Gustavo Silva).
- Constify an attribute_group structure in devfreq (Arvind Yadav)"
* tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / PM: Fix native PME handling during system suspend/resume
PCI / PM: Restore PME Enable after config space restoration
cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race
PM / QoS: return -EINVAL for bogus strings
cpufreq: intel_pstate: Fix ratio setting for min_perf_pct
PM / devfreq: constify attribute_group structures.
PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()
PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()
|
|
If we reach the limit of modprobe_limit threads running the next
request_module() call will fail. The original reason for adding a kill
was to do away with possible issues with in old circumstances which would
create a recursive series of request_module() calls.
We can do better than just be super aggressive and reject calls once we've
reached the limit by simply making pending callers wait until the
threshold has been reduced, and then throttling them in, one by one.
This throttling enables requests over the kmod concurrent limit to be
processed once a pending request completes. Only the first item queued up
to wait is woken up. The assumption here is once a task is woken it will
have no other option to also kick the queue to check if there are more
pending tasks -- regardless of whether or not it was successful.
By throttling and processing only max kmod concurrent tasks we ensure we
avoid unexpected fatal request_module() calls, and we keep memory
consumption on module loading to a minimum.
With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run
time to run both tests:
time ./kmod.sh -t 0008
real 0m16.366s
user 0m0.883s
sys 0m8.916s
time ./kmod.sh -t 0009
real 0m50.803s
user 0m0.791s
sys 0m9.852s
Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 73ce0511c436 ("kernel/watchdog.c: move hardlockup
detector to separate file"), 'NMI watchdog' is inappropriate in
kernel/watchdog.c, using 'watchdog' only.
Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* pm-cpufreq-sched:
cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race
* intel_pstate:
cpufreq: intel_pstate: Fix ratio setting for min_perf_pct
|
|
This comment in the code is incomplete, and I believe it begs a definition of
dl_boosted to make sense of the condition that follows. Rewrite the comment and
also rearrange the condition that follows to reflect the first condition "we
have a top pi-waiter which is a SCHED_DEADLINE task" in that order. Also fix a
typo that follows.
Signed-off-by: Joel Fernandes <joelaf@google.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170713022429.10307-1-joelaf@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Recent kernels trigger this warning:
BUG: using smp_processor_id() in preemptible [00000000] code: 99-trinity/181
caller is debug_smp_processor_id+0x17/0x19
CPU: 0 PID: 181 Comm: 99-trinity Not tainted 4.12.0-01059-g2a42eb9 #1
Call Trace:
dump_stack+0x82/0xb8
check_preemption_disabled()
debug_smp_processor_id()
vtime_delta()
task_cputime()
thread_group_cputime()
thread_group_cputime_adjusted()
wait_consider_task()
do_wait()
SYSC_wait4()
do_syscall_64()
entry_SYSCALL64_slow_path()
As Frederic pointed out:
| Although those sched_clock_cpu() things seem to only matter when the
| sched_clock() is unstable. And that stability is a condition for nohz_full
| to work anyway. So probably sched_clock() alone would be enough.
This patch fixes it by replacing sched_clock_cpu() with sched_clock() to
avoid calling smp_processor_id() in a preemptible context.
Reported-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1499586028-7402-1-git-send-email-wanpeng.li@hotmail.com
[ Prettified the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"A few more minor updates:
- Show the tgid mappings for user space trace tools to use
- Fix and optimize the comm and tgid cache recording
- Sanitize derived kprobe names
- Ftrace selftest updates
- trace file header fix
- Update of Documentation/trace/ftrace.txt
- Compiler warning fixes
- Fix possible uninitialized variable"
* tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix uninitialized variable in match_records()
ftrace: Remove an unneeded NULL check
ftrace: Hide cached module code for !CONFIG_MODULES
tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE
tracing: Update Documentation/trace/ftrace.txt
tracing: Fixup trace file header alignment
selftests/ftrace: Add a testcase for kprobe event naming
selftests/ftrace: Add a test to probe module functions
selftests/ftrace: Update multiple kprobes test for powerpc
trace/kprobes: Sanitize derived event names
tracing: Attempt to record other information even if some fail
tracing: Treat recording tgid for idle task as a success
tracing: Treat recording comm for idle task as a success
tracing: Add saved_tgids file to show cached pid to tgid mappings
|
|
Merge yet more updates from Andrew Morton:
- various misc things
- kexec updates
- sysctl core updates
- scripts/gdb udpates
- checkpoint-restart updates
- ipc updates
- kernel/watchdog updates
- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"
- "stackprotector: ascii armor the stack canary"
- more MM bits
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
writeback: rework wb_[dec|inc]_stat family of functions
ARM: samsung: usb-ohci: move inline before return type
video: fbdev: omap: move inline before return type
video: fbdev: intelfb: move inline before return type
USB: serial: safe_serial: move __inline__ before return type
drivers: tty: serial: move inline before return type
drivers: s390: move static and inline before return type
x86/efi: move asmlinkage before return type
sh: move inline before return type
MIPS: SMP: move asmlinkage before return type
m68k: coldfire: move inline before return type
ia64: sn: pci: move inline before type
ia64: move inline before return type
FRV: tlbflush: move asmlinkage before return type
CRIS: gpio: move inline before return type
ARM: HP Jornada 7XX: move inline before return type
ARM: KVM: move asmlinkage before type
checkpatch: improve the STORAGE_CLASS test
mm, migration: do not trigger OOM killer when migrating memory
drm/i915: use __GFP_RETRY_MAYFAIL
...
|
|
We don't need to adjust priority before adding a new pi_waiter, the
priority only needs to be updated after pi_waiter change or task
priority change.
Steven Rostedt pointed out:
"Interesting, I did some git mining and this was added with the original
entry of the rtmutex.c (23f78d4a03c5). Looking at even that version, I
don't see the purpose of adjusting the task prio here. It is done
before anything changes in the task."
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1499926704-28841-1-git-send-email-alex.shi@linaro.org
[ Enhance the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
