summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-15tracing: support "bool" type in synthetic trace eventsAxel Rasmussen
It's common [1] to define tracepoint fields as "bool" when they contain a true / false value. Currently, defining a synthetic event with a "bool" field yields EINVAL. It's possible to work around this by using e.g. u8 (assuming sizeof(bool) is 1, and bool is unsigned; if either of these properties don't match, you get EINVAL [2]). Supporting "bool" explicitly makes hooking this up easier and more portable for userspace. [1]: grep -r "bool" include/trace/events/ [2]: check_synth_field() in kernel/trace/trace_events_hist.c Link: https://lkml.kernel.org/r/20201009220524.485102-2-axelrasmussen@google.com Acked-by: Michel Lespinasse <walken@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Handle synthetic event array field type checking correctlyTom Zanussi
Since synthetic event array types are derived from the field name, there may be a semicolon at the end of the type which should be stripped off. If there are more characters following that, normal type string checking will result in an invalid type. Without this patch, you can end up with an invalid field type string that gets displayed in both the synthetic event description and the event format: Before: # echo 'myevent char str[16]; int v' >> synthetic_events # cat synthetic_events myevent char[16]; str; int v name: myevent ID: 1936 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char str[16];; offset:8; size:16; signed:1; field:int v; offset:40; size:4; signed:1; print fmt: "str=%s, v=%d", REC->str, REC->v After: # echo 'myevent char str[16]; int v' >> synthetic_events # cat synthetic_events myevent char[16] str; int v # cat events/synthetic/myevent/format name: myevent ID: 1936 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char str[16]; offset:8; size:16; signed:1; field:int v; offset:40; size:4; signed:1; print fmt: "str=%s, v=%d", REC->str, REC->v Link: https://lkml.kernel.org/r/6587663b56c2d45ab9d8c8472a2110713cdec97d.1602598160.git.zanussi@kernel.org [ <rostedt@goodmis.org>: wrote parse_synth_field() snippet. ] Fixes: 4b147936fa50 (tracing: Add support for 'synthetic' events) Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Add synthetic event error loggingTom Zanussi
Add support for synthetic event error logging, which entails adding a logging function for it, a way to save the synthetic event command, and a set of specific synthetic event parse error strings and handling. Link: https://lkml.kernel.org/r/ed099c66df13b40cfc633aaeb17f66c37a923066.1602598160.git.zanussi@kernel.org [ <rostedt@goodmis.org>: wrote save_cmdstr() seq_buf implementation. ] Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Check that the synthetic event and field names are legalTom Zanussi
Call the is_good_name() function used by probe events to make sure synthetic event and field names don't contain illegal characters and cause unexpected parsing of synthetic event commands. Link: https://lkml.kernel.org/r/c4d4bb59d3ac39bcbd70fba0cf837d6b1cedb015.1602598160.git.zanussi@kernel.org Fixes: 4b147936fa50 (tracing: Add support for 'synthetic' events) Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Move is_good_name() from trace_probe.h to trace.hTom Zanussi
is_good_name() is useful for other trace infrastructure, such as synthetic events, so make it available via trace.h. Link: https://lkml.kernel.org/r/cc6d6a2d7da6957fcbe1e2922e76d18d2bb459b4.1602598160.git.zanussi@kernel.org Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Don't show dynamic string internals in synthetic event descriptionTom Zanussi
For synthetic event dynamic fields, the type contains "__data_loc", which is basically an internal part of the type which is only meant to be displayed in the format, not in the event description itself, which is confusing to users since they can't use __data_loc on the command-line to define an event field, which printing it would lead them to believe. So filter it out from the description, while leaving it in the type. Link: https://lkml.kernel.org/r/b3b7baf7813298a5ede4ff02e2e837b91c05a724.1602598160.git.zanussi@kernel.org Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Fix some typos in commentsQiujun Huang
s/wihin/within/ s/retrieven/retrieved/ s/suppport/support/ s/wil/will/ s/accidently/accidentally/ s/if the if the/if the/ Link: https://lkml.kernel.org/r/20201010140924.3809-1-hqjagain@gmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing/boot: Add ftrace.instance.*.alloc_snapshot optionMasami Hiramatsu
Add ftrace.instance.*.alloc_snapshot option. This option has been described in Documentation/trace/boottime-trace.rst but not implemented yet. ftrace.[instance.INSTANCE.]alloc_snapshot Allocate snapshot buffer. The difference from kernel.alloc_snapshot is that the kernel.alloc_snapshot will allocate the buffer only for the main instance, but this can allocate buffer for any new instances. Link: https://lkml.kernel.org/r/160234368948.400560.15313384470765915015.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Fix race in trace_open and buffer resize callGaurav Kohli
Below race can come, if trace_open and resize of cpu buffer is running parallely on different cpus CPUX CPUY ring_buffer_resize atomic_read(&buffer->resize_disabled) tracing_open tracing_reset_online_cpus ring_buffer_reset_cpu rb_reset_cpu rb_update_pages remove/insert pages resetting pointer This race can cause data abort or some times infinte loop in rb_remove_pages and rb_insert_pages while checking pages for sanity. Take buffer lock to fix this. Link: https://lkml.kernel.org/r/1601976833-24377-1-git-send-email-gkohli@codeaurora.org Cc: stable@vger.kernel.org Fixes: b23d7a5f4a07a ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU") Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15tracing: Check return value of __create_val_fields() before using its resultSteven Rostedt (VMware)
After having a typo for writing a histogram trigger. Wrote: echo 'hist:key=pid:ts=common_timestamp.usec' > events/sched/sched_waking/trigger Instead of: echo 'hist:key=pid:ts=common_timestamp.usecs' > events/sched/sched_waking/trigger and the following crash happened: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 1641 Comm: sh Not tainted 5.9.0-rc5-test+ #549 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:event_hist_trigger_func+0x70b/0x1ee0 Code: 24 08 89 d5 49 89 cc e9 8c 00 00 00 4c 89 f2 41 b9 00 10 00 00 4c 89 e1 44 89 ee 4c 89 ff e8 dc d3 ff ff 45 89 ea 4b 8b 14 d7 <f6> 42 08 04 74 17 41 8b 8f c0 00 00 00 8d 71 01 41 89 b7 c0 00 00 RSP: 0018:ffff959213d53db0 EFLAGS: 00010202 RAX: ffffffffffffffea RBX: 0000000000000000 RCX: 0000000000084c04 RDX: 0000000000000000 RSI: df7326aefebd174c RDI: 0000000000031080 RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000046 R12: ffff959211dcf690 R13: 0000000000000001 R14: ffff95925a36e370 R15: ffff959251c89800 FS: 00007fb9ea934740(0000) GS:ffff95925ab00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000c976c005 CR4: 00000000001706e0 Call Trace: ? trigger_process_regex+0x78/0x110 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fb9eaa29487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 This was caused by accessing the hlist_data fields after the call to __create_val_fields() without checking if the creation succeed. Link: https://lkml.kernel.org/r/20201013154852.3abd8702@gandalf.local.home Fixes: 63a1e5de3006 ("tracing: Save normal string variables") Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15bpf: Fix register equivalence tracking.Alexei Starovoitov
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either true or false branch. In the case 'if (reg->id)' check was done on the other branch the counter part register would have reg->id == 0 when called into find_equal_scalars(). In such case the helper would incorrectly identify other registers with id == 0 as equivalent and propagate the state incorrectly. Fix it by preserving ID across reg_set_min_max(). In other words any kind of comparison operator on the scalar register should preserve its ID to recognize: r1 = r2 if (r1 == 20) { #1 here both r1 and r2 == 20 } else if (r2 < 20) { #2 here both r1 and r2 < 20 } The patch is addressing #1 case. The #2 was working correctly already. Fixes: 75748837b7e5 ("bpf: Propagate scalar ranges through register assignments.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201014175608.1416-1-alexei.starovoitov@gmail.com
2020-10-15printk: ringbuffer: Wrong data pointer when appending small stringPetr Mladek
data_realloc() returns wrong data pointer when the block is wrapped and the size is not increased. It might happen when pr_cont() wants to add only few characters and there is already a space for them because of alignment. It might cause writing outsite the buffer. It has been detected by LTP tests with KASAN enabled: [ 221.921944] oom-kill:constraint=CONSTRAINT_MEMCG,nodemask=(null),cpuset=c,mems_allowed=0,oom_memcg=/0,task_memcg=in [ 221.922108] ================================================================== [ 221.922111] BUG: KASAN: global-out-of-bounds in vprintk_store+0x362/0x3d0 [ 221.922112] Write of size 2 at addr ffffffffba51dbcd by task memcg_test_1/11282 [ 221.922113] [ 221.922114] CPU: 1 PID: 11282 Comm: memcg_test_1 Not tainted 5.9.0-next-20201013 #1 [ 221.922116] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 221.922116] Call Trace: [ 221.922117] dump_stack+0xa4/0xd9 [ 221.922118] print_address_description.constprop.0+0x21/0x210 [ 221.922119] ? _raw_write_lock_bh+0xe0/0xe0 [ 221.922120] ? vprintk_store+0x362/0x3d0 [ 221.922121] kasan_report.cold+0x37/0x7c [ 221.922122] ? vprintk_store+0x362/0x3d0 [ 221.922123] check_memory_region+0x18c/0x1f0 [ 221.922124] memcpy+0x3c/0x60 [ 221.922125] vprintk_store+0x362/0x3d0 [ 221.922125] ? __ia32_sys_syslog+0x50/0x50 [ 221.922126] ? _raw_spin_lock_irqsave+0x9b/0x100 [ 221.922127] ? _raw_spin_lock_irq+0xf0/0xf0 [ 221.922128] ? __kasan_check_write+0x14/0x20 [ 221.922129] vprintk_emit+0x8d/0x1f0 [ 221.922130] vprintk_default+0x1d/0x20 [ 221.922131] vprintk_func+0x5a/0x100 [ 221.922132] printk+0xb2/0xe3 [ 221.922133] ? swsusp_write.cold+0x189/0x189 [ 221.922134] ? kernfs_vfs_xattr_set+0x60/0x60 [ 221.922134] ? _raw_write_lock_bh+0xe0/0xe0 [ 221.922135] ? trace_hardirqs_on+0x38/0x100 [ 221.922136] pr_cont_kernfs_path.cold+0x49/0x4b [ 221.922137] mem_cgroup_print_oom_context.cold+0x74/0xc3 [ 221.922138] dump_header+0x340/0x3bf [ 221.922139] oom_kill_process.cold+0xb/0x10 [ 221.922140] out_of_memory+0x1e9/0x860 [ 221.922141] ? oom_killer_disable+0x210/0x210 [ 221.922142] mem_cgroup_out_of_memory+0x198/0x1c0 [ 221.922143] ? mem_cgroup_count_precharge_pte_range+0x250/0x250 [ 221.922144] try_charge+0xa9b/0xc50 [ 221.922145] ? arch_stack_walk+0x9e/0xf0 [ 221.922146] ? memory_high_write+0x230/0x230 [ 221.922146] ? avc_has_extended_perms+0x830/0x830 [ 221.922147] ? stack_trace_save+0x94/0xc0 [ 221.922148] ? stack_trace_consume_entry+0x90/0x90 [ 221.922149] __memcg_kmem_charge+0x73/0x120 [ 221.922150] ? cred_has_capability+0x10f/0x200 [ 221.922151] ? mem_cgroup_can_attach+0x260/0x260 [ 221.922152] ? selinux_sb_eat_lsm_opts+0x2f0/0x2f0 [ 221.922153] ? obj_cgroup_charge+0x16b/0x220 [ 221.922154] ? kmem_cache_alloc+0x78/0x4c0 [ 221.922155] obj_cgroup_charge+0x122/0x220 [ 221.922156] ? vm_area_alloc+0x20/0x90 [ 221.922156] kmem_cache_alloc+0x78/0x4c0 [ 221.922157] vm_area_alloc+0x20/0x90 [ 221.922158] mmap_region+0x3ed/0x9a0 [ 221.922159] ? cap_mmap_addr+0x1d/0x80 [ 221.922160] do_mmap+0x3ee/0x720 [ 221.922161] vm_mmap_pgoff+0x16a/0x1c0 [ 221.922162] ? randomize_stack_top+0x90/0x90 [ 221.922163] ? copy_page_range+0x1980/0x1980 [ 221.922163] ksys_mmap_pgoff+0xab/0x350 [ 221.922164] ? find_mergeable_anon_vma+0x110/0x110 [ 221.922165] ? __audit_syscall_entry+0x1a6/0x1e0 [ 221.922166] __x64_sys_mmap+0x8d/0xb0 [ 221.922167] do_syscall_64+0x38/0x50 [ 221.922168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 221.922169] RIP: 0033:0x7fe8f5e75103 [ 221.922172] Code: 54 41 89 d4 55 48 89 fd 53 4c 89 cb 48 85 ff 74 56 49 89 d9 45 89 f8 45 89 f2 44 89 e2 4c 89 ee 48 89 ef b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7d 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f [ 221.922173] RSP: 002b:00007ffd38c90198 EFLAGS: 00000246 ORIG_RAX: 0000000000000009 [ 221.922175] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe8f5e75103 [ 221.922176] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 0000000000000000 [ 221.922178] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 221.922179] R10: 0000000000002022 R11: 0000000000000246 R12: 0000000000000003 [ 221.922180] R13: 0000000000001000 R14: 0000000000002022 R15: 0000000000000000 [ 221.922181] [ 213O[ 221.922182] The buggy address belongs to the variable: [ 221.922183] clear_seq+0x2d/0x40 [ 221.922183] [ 221.922184] Memory state around the buggy address: [ 221.922185] ffffffffba51da80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 221.922187] ffffffffba51db00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 221.922188] >ffffffffba51db80: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 00 f9 f9 f9 [ 221.922189] ^ [ 221.922190] ffffffffba51dc00: f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9 00 f9 f9 f9 [ 221.922191] ffffffffba51dc80: f9 f9 f9 f9 01 f9 f9 f9 f9 f9 f9 f9 00 f9 f9 f9 [ 221.922193] ================================================================== [ 221.922194] Disabling lock debugging due to kernel taint [ 221.922196] ,task=memcg_test_1,pid=11280,uid=0 [ 221.922205] Memory cgroup out of memory: Killed process 11280 Link: https://lore.kernel.org/r/CA+G9fYt46oC7-BKryNDaaXPJ9GztvS2cs_7GjYRjanRi4+ryCQ@mail.gmail.com Fixes: 4cfc7258f876a7feba673ac ("printk: ringbuffer: add finalization/extension support") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201014175051.GC13775@alley
2020-10-15rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpuMauro Carvalho Chehab
Changeset 53c72b590b3a ("rcu/tree: cache specified number of objects") added new members for struct kfree_rcu_cpu, but didn't add the corresponding at the kernel-doc markup, as repoted when doing "make htmldocs": ./kernel/rcu/tree.c:3113: warning: Function parameter or member 'bkvcache' not described in 'kfree_rcu_cpu' ./kernel/rcu/tree.c:3113: warning: Function parameter or member 'nr_bkv_objs' not described in 'kfree_rcu_cpu' So, move the description for bkvcache to kernel-doc, and add a description for nr_bkv_objs. Fixes: 53c72b590b3a ("rcu/tree: cache specified number of objects") Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-14Merge branch 'for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Two minor changes. One makes cgroup interface files ignore zero-sized writes rather than triggering -EINVAL on them. The other change is a cleanup which doesn't cause any behavior changes" * 'for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Zero sized write should be no-op cgroup: remove redundant kernfs_activate in cgroup_setup_root()
2020-10-14Merge tag 'threads-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This introduces a new extension to the pidfd_open() syscall. Users can now raise the new PIDFD_NONBLOCK flag to support non-blocking pidfd file descriptors. This has been requested for uses in async process management libraries such as async-pidfd in Rust. Ever since the introduction of pidfds and more advanced async io various programming languages such as Rust have grown support for async event libraries. These libraries are created to help build epoll-based event loops around file descriptors. A common pattern is to automatically make all file descriptors they manage to O_NONBLOCK. For such libraries the EAGAIN error code is treated specially. When a function is called that returns EAGAIN the function isn't called again until the event loop indicates the the file descriptor is ready. Supporting EAGAIN when waiting on pidfds makes such libraries just work with little effort. This introduces a new flag PIDFD_NONBLOCK that is equivalent to O_NONBLOCK. This follows the same patterns we have for other (anon inode) file descriptors such as EFD_NONBLOCK, IN_NONBLOCK, SFD_NONBLOCK, TFD_NONBLOCK and the same for close-on-exec flags. Passing a non-blocking pidfd to waitid() currently has no effect, i.e. is not supported. There are users which would like to use waitid() on pidfds that are O_NONBLOCK and mix it with pidfds that are blocking and both pass them to waitid(). The expected behavior is to have waitid() return -EAGAIN for non-blocking pidfds and to block for blocking pidfds without needing to perform any additional checks for flags set on the pidfd before passing it to waitid(). Non-blocking pidfds will return EAGAIN from waitid() when no child process is ready yet. Returning -EAGAIN for non-blocking pidfds makes it easier for event loops that handle EAGAIN specially. It also makes the API more consistent and uniform. In essence, waitid() is treated like a read on a non-blocking pidfd or a recvmsg() on a non-blocking socket. With the addition of support for non-blocking pidfds we support the same functionality that sockets do. For sockets() recvmsg() supports MSG_DONTWAIT for pidfds waitid() supports WNOHANG. Both flags are per-call options. In contrast non-blocking pidfds and non-blocking sockets are a setting on an open file description affecting all threads in the calling process as well as other processes that hold file descriptors referring to the same open file description. Both behaviors, per call and per open file description, have genuine use-cases. The interaction with the WNOHANG flag is documented as follows: - If a non-blocking pidfd is passed and WNOHANG is not raised we simply raise the WNOHANG flag internally. When do_wait() returns indicating that there are eligible child processes but none have exited yet we set EAGAIN. If no child process exists we continue returning ECHILD. - If a non-blocking pidfd is passed and WNOHANG is raised waitid() will continue returning 0, i.e. it will not set EAGAIN. This ensure backwards compatibility with applications passing WNOHANG explicitly with pidfds" * tag 'threads-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: remove O_NONBLOCK before waiting for WSTOPPED tests: add waitid() tests for non-blocking pidfds tests: port pidfd_wait to kselftest harness pidfd: support PIDFD_NONBLOCK in pidfd_open() exit: support non-blocking pidfds
2020-10-14Merge tag 'kernel-clone-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()
2020-10-14Merge branch 'stable/for-linus-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Minor enhancement of using %p to print phys_addr_r and also compiler warnings" * 'stable/for-linus-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Mark max_segment with static keyword swiotlb: Declare swiotlb_late_init_with_default_size() in header swiotlb: Use %pa to print phys_addr_t variables
2020-10-14sched/features: Fix !CONFIG_JUMP_LABEL caseJuri Lelli
Commit: 765cc3a4b224e ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds") made sched features static for !CONFIG_SCHED_DEBUG configurations, but overlooked the CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL cases. For the latter echoing changes to /sys/kernel/debug/sched_features has the nasty effect of effectively changing what sched_features reports, but without actually changing the scheduler behaviour (since different translation units get different sysctl_sched_features). Fix CONFIG_SCHED_DEBUG=y and !CONFIG_JUMP_LABEL configurations by properly restructuring ifdefs. Fixes: 765cc3a4b224e ("sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds") Co-developed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Patrick Bellasi <patrick.bellasi@matbug.net> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20201013053114.160628-1-juri.lelli@redhat.com
2020-10-14sched: Replace zero-length array with flexible-arrayzhuguangqing
In the following commit: 04f5c362ec6d: ("sched/fair: Replace zero-length array with flexible-array") a zero-length array cpumask[0] has been replaced with cpumask[]. But there is still a cpumask[0] in 'struct sched_group_capacity' which was missed. The point of using [] instead of [0] is that with [] the compiler will generate a build warning if it isn't the last member of a struct. [ mingo: Rewrote the changelog. ] Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20201014140220.11384-1-zhuguangqing83@gmail.com
2020-10-14Merge tag 'pm-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ...
2020-10-14Merge tag 'objtool-core-2020-10-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
2020-10-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...
2020-10-13mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessarySuren Baghdasaryan
Currently __set_oom_adj loops through all processes in the system to keep oom_score_adj and oom_score_adj_min in sync between processes sharing their mm. This is done for any task with more that one mm_users, which includes processes with multiple threads (sharing mm and signals). However for such processes the loop is unnecessary because their signal structure is shared as well. Android updates oom_score_adj whenever a tasks changes its role (background/foreground/...) or binds to/unbinds from a service, making it more/less important. Such operation can happen frequently. We noticed that updates to oom_score_adj became more expensive and after further investigation found out that the patch mentioned in "Fixes" introduced a regression. Using Pixel 4 with a typical Android workload, write time to oom_score_adj increased from ~3.57us to ~362us. Moreover this regression linearly depends on the number of multi-threaded processes running on the system. Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK). Change __set_oom_adj to use MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj update should be synchronized between multiple processes. To prevent races between clone() and __set_oom_adj(), when oom_score_adj of the process being cloned might be modified from userspace, we use oom_adj_mutex. Its scope is changed to global. The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for the case of vfork(). To prevent performance regressions of vfork(), we skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is specified. Clearing the MMF_MULTIPROCESS flag (when the last process sharing the mm exits) is left out of this patch to keep it simple and because it is believed that this threading model is rare. Should there ever be a need for optimizing that case as well, it can be done by hooking into the exit path, likely following the mm_update_next_owner pattern. With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being quite rare, the regression is gone after the change is applied. [surenb@google.com: v3] Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") Reported-by: Tim Murray <timmurray@google.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Christian Kellner <christian@kellner.me> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: John Johansen <john.johansen@canonical.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com Debugged-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13dma-contiguous: simplify cma_early_percent_memory()Mike Rapoport
The memory size calculation in cma_early_percent_memory() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm: remove src/dst mm parameter in copy_page_range()Peter Xu
Both of the mm pointers are not needed after commit 7a4830c380f3 ("mm/fork: Pass new vma pointer into copy_page_range()"). Jason Gunthorpe also reported that the ordering of copy_page_range() is odd. Since working at it, reorder the parameters to be logical, by (1) always put the dst_* fields to be before src_* fields, and (2) keep the same type of parameters together. [peterx@redhat.com: further reorder some parameters and line format, per Jason] Link: https://lkml.kernel.org/r/20201002192647.7161-1-peterx@redhat.com [peterx@redhat.com: fix warnings] Link: https://lkml.kernel.org/r/20201006200138.GA6026@xz-x1 Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20200930204950.6668-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm: use helper function mapping_allow_writable()Miaohe Lin
Commit 4bb5f5d9395b ("mm: allow drivers to prevent new writable mappings") changed i_mmap_writable from unsigned int to atomic_t and add the helper function mapping_allow_writable() to atomic_inc i_mmap_writable. But it forgot to use this helper function in dup_mmap() and __vma_link_file(). Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Christian Kellner <christian@kellner.me> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Adrian Reber <areber@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200917112736.7789-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13resource: report parent to walk_iomem_res_desc() callbackDan Williams
In support of detecting whether a resource might have been been claimed, report the parent to the walk_iomem_res_desc() callback. For example, the ACPI HMAT parser publishes "hmem" platform devices per target range. However, if the HMAT is disabled / missing a fallback driver can attach devices to the raw memory ranges as a fallback if it sees unclaimed / orphan "Soft Reserved" resources in the resource tree. Otherwise, find_next_iomem_res() returns a resource with garbage data from the stack allocation in __walk_iomem_res_desc() for the res->parent field. There are currently no users that expect ->child and ->sibling to be valid, and the resource_lock would be needed to traverse them. Use a compound literal to implicitly zero initialize the fields that are not being returned in addition to setting ->parent. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Hulk Robot <hulkci@huawei.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Link: https://lkml.kernel.org/r/159643097166.4062302.11875688887228572793.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13Merge tag 'seccomp-v5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The bulk of the changes are with the seccomp selftests to accommodate some powerpc-specific behavioral characteristics. Additional cleanups, fixes, and improvements are also included: - heavily refactor seccomp selftests (and clone3 selftests dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo) - fix style issue in selftests (Zou Wei) - upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker) - replace task_pt_regs(current) with current_pt_regs() (Denis Efremov) - fix corner-case race in USER_NOTIF (Jann Horn) - make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)" * tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits) seccomp: Make duplicate listener detection non-racy seccomp: Move config option SECCOMP to arch/Kconfig selftests/clone3: Avoid OS-defined clone_args selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit selftests/seccomp: Allow syscall nr and ret value to be set separately selftests/seccomp: Record syscall during ptrace entry selftests/seccomp: powerpc: Fix seccomp return value testing selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET selftests/seccomp: Avoid redundant register flushes selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Remove syscall setting #ifdefs selftests/seccomp: mips: Remove O32-specific macro selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro selftests/seccomp: arm: Define SYSCALL_NUM_SET macro selftests/seccomp: mips: Define SYSCALL_NUM_SET macro selftests/seccomp: Provide generic syscall setting macro selftests/seccomp: Refactor arch register macros to avoid xtensa special case selftests/seccomp: Use __NR_mknodat instead of __NR_mknod selftests/seccomp: Use bitwise instead of arithmetic operator for flags ...
2020-10-13Merge tag 'audit-pr-20201012' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "A small set of audit patches for v5.10. There are only three patches in total, and all three are trivial fixes that don't really warrant any explanations beyond their descriptions. As usual, all three patches pass our test suite" * tag 'audit-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Remove redundant null check audit: uninitialize variable audit_sig_sid audit: change unnecessary globals into statics
2020-10-13Merge tag 'printk-for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: "The big new thing is the fully lockless ringbuffer implementation, including the support for continuous lines. It will allow to store and read messages in any situation wihtout the risk of deadlocks and without the need of temporary per-CPU buffers. The access is still serialized by logbuf_lock. It synchronizes few more operations, for example, temporary buffer for formatting the message, syslog and kmsg_dump operations. The lock removal is being discussed and should be ready for the next release. The continuous lines are handled exactly the same way as before to avoid regressions in user space. It means that they are appended to the last message when the caller is the same. Only the last message can be extended. The data ring includes plain text of the messages. Except for an integer at the beginning of each message that points back to the descriptor ring with other metadata. The dictionary has to stay. journalctl uses it to filter the log. It allows to show messages related to a given device. The dictionary values are stored in the descriptor ring with the other metadata. This is the first part of the printk rework as discussed at Plumbers 2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The next big step will be handling consoles by kthreads during the normal system operation. It will require special handling of situations when the kthreads could not get scheduled, for example, early boot, suspend, panic. Other changes: - Add John Ogness as a reviewer for printk subsystem. He is author of the rework and is familiar with the code and history. - Fix locking in serial8250_do_startup() to prevent lockdep report. - Few code cleanups" * tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits) printk: Use fallthrough pseudo-keyword printk: reduce setup_text_buf size to LOG_LINE_MAX printk: avoid and/or handle record truncation printk: remove dict ring printk: move dictionary keys to dev_printk_info printk: move printk_info into separate array printk: reimplement log_cont using record extension printk: ringbuffer: add finalization/extension support printk: ringbuffer: change representation of states printk: ringbuffer: clear initial reserved fields printk: ringbuffer: add BLK_DATALESS() macro printk: ringbuffer: relocate get_data() printk: ringbuffer: avoid memcpy() on state_var printk: ringbuffer: fix setting state in desc_read() kernel.h: Move oops_in_progress to printk.h scripts/gdb: update for lockless printk ringbuffer scripts/gdb: add utils.read_ulong() docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo printk: reduce LOG_BUF_SHIFT range for H8300 printk: ringbuffer: support dataless records ...
2020-10-13Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: - Add blkcg accounting for io-wq offload (Dennis) - A use-after-free fix for io-wq (Hillf) - Cancelation fixes and improvements - Use proper files_struct references for offload - Cleanup of io_uring_get_socket() since that can now go into our own header - SQPOLL fixes and cleanups, and support for sharing the thread - Improvement to how page accounting is done for registered buffers and huge pages, accounting the real pinned state - Series cleaning up the xarray code (Willy) - Various cleanups, refactoring, and improvements (Pavel) - Use raw spinlock for io-wq (Sebastian) - Add support for ring restrictions (Stefano) * tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits) io_uring: keep a pointer ref_node in file_data io_uring: refactor *files_register()'s error paths io_uring: clean file_data access in files_register io_uring: don't delay io_init_req() error check io_uring: clean leftovers after splitting issue io_uring: remove timeout.list after hrtimer cancel io_uring: use a separate struct for timeout_remove io_uring: improve submit_state.ios_left accounting io_uring: simplify io_file_get() io_uring: kill extra check in fixed io_file_get() io_uring: clean up ->files grabbing io_uring: don't io_prep_async_work() linked reqs io_uring: Convert advanced XArray uses to the normal API io_uring: Fix XArray usage in io_uring_add_task_file io_uring: Fix use of XArray in __io_uring_files_cancel io_uring: fix break condition for __io_uring_register() waiting io_uring: no need to call xa_destroy() on empty xarray io_uring: batch account ->req_issue and task struct references io_uring: kill callback_head argument for io_req_task_work_add() io_uring: move req preps out of io_issue_sqe() ...
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-13LSM: Signal to SafeSetID when setting group IDsThomas Cedeno
For SafeSetID to properly gate set*gid() calls, it needs to know whether ns_capable() is being called from within a sys_set*gid() function or is being called from elsewhere in the kernel. This allows SafeSetID to deny CAP_SETGID to restricted groups when they are attempting to use the capability for code paths other than updating GIDs (e.g. setting up userns GID mappings). This is the identical approach to what is currently done for CAP_SETUID. NOTE: We also add signaling to SafeSetID from the setgroups() syscall, as we have future plans to restrict a process' ability to set supplementary groups in addition to what is added in this series for restricting setting of the primary group. Signed-off-by: Thomas Cedeno <thomascedeno@google.com> Signed-off-by: Micah Morton <mortonm@chromium.org>
2020-10-13Merge branches 'pm-core', 'pm-sleep', 'pm-pci' and 'pm-domains'Rafael J. Wysocki
* pm-core: PM: runtime: Fix timer_expires data type on 32-bit arches PM: runtime: Remove link state checks in rpm_get/put_supplier() * pm-sleep: ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PM: hibernate: remove the bogus call to get_gendisk() in software_resume() PM: hibernate: Batch hibernate and resume IO requests * pm-pci: PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI * pm-domains: PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd
2020-10-13Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (30 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() arch_topology, arm, arm64: define arch_scale_freq_invariant() arch_topology, cpufreq: constify arch_* cpumasks cpufreq: report whether cpufreq supports Frequency Invariance (FI) cpufreq: move invariance setter calls in cpufreq core arch_topology: validate input frequencies to arch_set_freq_scale() cpufreq: qcom: Don't add frequencies without an OPP cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible ...
2020-10-12Merge branch 'work.quota-compat' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat quotactl cleanups from Al Viro: "More Christoph's compat cleanups: quotactl(2)" * 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: quota: simplify the quotactl compat handling compat: add a compat_need_64bit_alignment_fixup() helper compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
2020-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-10-12 The main changes are: 1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong. 2) libbpf relocation support for different size load/store, from Andrii. 3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel. 4) BPF support for per-cpu variables, form Hao. 5) sockmap improvements, from John. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12Merge tag 'perf-kprobes-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf/kprobes updates from Ingo Molnar: "This prepares to unify the kretprobe trampoline handler and make kretprobe lockless (those patches are still work in progress)" * tag 'perf-kprobes-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes: Fix to check probe enabled before disarm_kprobe_ftrace() kprobes: Make local functions static kprobes: Free kretprobe_instance with RCU callback kprobes: Remove NMI context check sparc: kprobes: Use generic kretprobe trampoline handler sh: kprobes: Use generic kretprobe trampoline handler s390: kprobes: Use generic kretprobe trampoline handler powerpc: kprobes: Use generic kretprobe trampoline handler parisc: kprobes: Use generic kretprobe trampoline handler mips: kprobes: Use generic kretprobe trampoline handler ia64: kprobes: Use generic kretprobe trampoline handler csky: kprobes: Use generic kretprobe trampoline handler arc: kprobes: Use generic kretprobe trampoline handler arm64: kprobes: Use generic kretprobe trampoline handler arm: kprobes: Use generic kretprobe trampoline handler x86/kprobes: Use generic kretprobe trampoline handler kprobes: Add generic kretprobe trampoline handler
2020-10-12Merge tag 'perf-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull performance events updates from Ingo Molnar: "x86 Intel updates: - Add Jasper Lake support - Add support for TopDown metrics on Ice Lake - Fix Ice Lake & Tiger Lake uncore support, add Snow Ridge support - Add a PCI sub driver to support uncore PMUs where the PCI resources have been claimed already - extending the range of supported systems. x86 AMD updates: - Restore 'perf stat -a' behaviour to program the uncore PMU to count all CPU threads. - Fix setting the proper count when sampling Large Increment per Cycle events / 'paired' events. - Fix IBS Fetch sampling on F17h and some other IBS fine tuning, greatly reducing the number of interrupts when large sample periods are specified. - Extends Family 17h RAPL support to also work on compatible F19h machines. Core code updates: - Fix race in perf_mmap_close() - Add PERF_EV_CAP_SIBLING, to denote that sibling events should be closed if the leader is removed. - Smaller fixes and updates" * tag 'perf-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) perf/core: Fix race in the perf_mmap_close() function perf/x86: Fix n_metric for cancelled txn perf/x86: Fix n_pair for cancelled txn x86/events/amd/iommu: Fix sizeof mismatch perf/x86/intel: Check perf metrics feature for each CPU perf/x86/intel: Fix Ice Lake event constraint table perf/x86/intel/uncore: Fix the scale of the IMC free-running events perf/x86/intel/uncore: Fix for iio mapping on Skylake Server perf/x86/msr: Add Jasper Lake support perf/x86/intel: Add Jasper Lake support perf/x86/intel/uncore: Reduce the number of CBOX counters perf/x86/intel/uncore: Update Ice Lake uncore units perf/x86/intel/uncore: Split the Ice Lake and Tiger Lake MSR uncore support perf/x86/intel/uncore: Support PCIe3 unit on Snow Ridge perf/x86/intel/uncore: Generic support for the PCI sub driver perf/x86/intel/uncore: Factor out uncore_pci_pmu_unregister() perf/x86/intel/uncore: Factor out uncore_pci_pmu_register() perf/x86/intel/uncore: Factor out uncore_pci_find_dev_pmu() perf/x86/intel/uncore: Factor out uncore_pci_get_dev_die_info() perf/amd/uncore: Inform the user how many counters each uncore PMU has ...
2020-10-12Merge tag 'core-static_call-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static call support from Ingo Molnar: "This introduces static_call(), which is the idea of static_branch() applied to indirect function calls. Remove a data load (indirection) by modifying the text. They give the flexibility of function pointers, but with better performance. (This is especially important for cases where retpolines would otherwise be used, as retpolines can be pretty slow.) API overview: DECLARE_STATIC_CALL(name, func); DEFINE_STATIC_CALL(name, func); DEFINE_STATIC_CALL_NULL(name, typename); static_call(name)(args...); static_call_cond(name)(args...); static_call_update(name, func); x86 is supported via text patching, otherwise basic indirect calls are used, with function pointers. There's a second variant using inline code patching, inspired by jump-labels, implemented on x86 as well. The new APIs are utilized in the x86 perf code, a heavy user of function pointers, where static calls speed up the PMU handler by 4.2% (!). The generic implementation is not really excercised on other architectures, outside of the trivial test_static_call_init() self-test" * tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) static_call: Fix return type of static_call_init tracepoint: Fix out of sync data passing by static caller tracepoint: Fix overly long tracepoint names x86/perf, static_call: Optimize x86_pmu methods tracepoint: Optimize using static_call() static_call: Allow early init static_call: Add some validation static_call: Handle tail-calls static_call: Add static_call_cond() x86/alternatives: Teach text_poke_bp() to emulate RET static_call: Add simple self-test for static calls x86/static_call: Add inline static call implementation for x86-64 x86/static_call: Add out-of-line static call implementation static_call: Avoid kprobes on inline static_call()s static_call: Add inline static call infrastructure static_call: Add basic static call infrastructure compiler.h: Make __ADDRESSABLE() symbol truly unique jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved() module: Properly propagate MODULE_STATE_COMING failure module: Fix up module_notifier return values ...
2020-10-12Merge tag 'locking-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "These are the locking updates for v5.10: - Add deadlock detection for recursive read-locks. The rationale is outlined in commit 224ec489d3cd ("lockdep/ Documention: Recursive read lock detection reasoning") The main deadlock pattern we want to detect is: TASK A: TASK B: read_lock(X); write_lock(X); read_lock_2(X); - Add "latch sequence counters" (seqcount_latch_t): A sequence counter variant where the counter even/odd value is used to switch between two copies of protected data. This allows the read path, typically NMIs, to safely interrupt the write side critical section. We utilize this new variant for sched-clock, and to make x86 TSC handling safer. - Other seqlock cleanups, fixes and enhancements - KCSAN updates - LKMM updates - Misc updates, cleanups and fixes" * tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables" lockdep: Fix lockdep recursion lockdep: Fix usage_traceoverflow locking/atomics: Check atomic-arch-fallback.h too locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc lockdep: Optimize the memory usage of circular queue seqlock: Unbreak lockdep seqlock: PREEMPT_RT: Do not starve seqlock_t writers seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support seqlock: seqcount_t: Implement all read APIs as statement expressions seqlock: Use unique prefix for seqcount_t property accessors seqlock: seqcount_LOCKNAME_t: Standardize naming convention seqlock: seqcount latch APIs: Only allow seqcount_latch_t rbtree_latch: Use seqcount_latch_t x86/tsc: Use seqcount_latch_t timekeeping: Use seqcount_latch_t time/sched_clock: Use seqcount_latch_t seqlock: Introduce seqcount_latch_t mm/swap: Do not abuse the seqcount_t latching API time/sched_clock: Use raw_read_seqcount_latch() during suspend ...
2020-10-12Merge tag 'sched-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - reorganize & clean up the SD* flags definitions and add a bunch of sanity checks. These new checks caught quite a few bugs or at least inconsistencies, resulting in another set of patches. - rseq updates, add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ - add a new tracepoint to improve CPU capacity tracking - improve overloaded SMP system load-balancing behavior - tweak SMT balancing - energy-aware scheduling updates - NUMA balancing improvements - deadline scheduler fixes and improvements - CPU isolation fixes - misc cleanups, simplifications and smaller optimizations * tag 'sched-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) sched/deadline: Unthrottle PI boosted threads while enqueuing sched/debug: Add new tracepoint to track cpu_capacity sched/fair: Tweak pick_next_entity() rseq/selftests: Test MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ rseq/selftests,x86_64: Add rseq_offset_deref_addv() rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ sched/fair: Use dst group while checking imbalance for NUMA balancer sched/fair: Reduce busy load balance interval sched/fair: Minimize concurrent LBs between domain level sched/fair: Reduce minimal imbalance threshold sched/fair: Relax constraint on task's load during load balance sched/fair: Remove the force parameter of update_tg_load_avg() sched/fair: Fix wrong cpu selecting from isolated domain sched: Remove unused inline function uclamp_bucket_base_value() sched/rt: Disable RT_RUNTIME_SHARE by default sched/deadline: Fix stale throttling on de-/boosted tasks sched/numa: Use runnable_avg to classify node sched/topology: Move sd_flag_debug out of #ifdef CONFIG_SYSCTL MAINTAINERS: Add myself as SCHED_DEADLINE reviewer sched/topology: Move SD_DEGENERATE_GROUPS_MASK out of linux/sched/topology.h ...
2020-10-12Merge tag 'x86-irq-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq updates from Thomas Gleixner: "Surgery of the MSI interrupt handling to prepare the support of upcoming devices which require non-PCI based MSI handling: - Cleanup historical leftovers all over the place - Rework the code to utilize more core functionality - Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain assignment to PCI devices possible. - Assign irqdomains to PCI devices at initialization time which allows to utilize the full functionality of hierarchical irqdomains. - Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain which is assigned to the device for interrupt management. - Make the arch_.*_msi_irq() support conditional on a config switch and let the last few users select it" * tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS x86/apic/msi: Unbreak DMAR and HPET MSI iommu/amd: Remove domain search for PCI/MSI iommu/vt-d: Remove domain search for PCI/MSI[X] x86/irq: Make most MSI ops XEN private x86/irq: Cleanup the arch_*_msi_irqs() leftovers PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable x86/pci: Set default irq domain in pcibios_add_device() iommm/amd: Store irq domain in struct device iommm/vt-d: Store irq domain in struct device x86/xen: Wrap XEN MSI management into irqdomain irqdomain/msi: Allow to override msi_domain_alloc/free_irqs() x86/xen: Consolidate XEN-MSI init x86/xen: Rework MSI teardown x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init() PCI/MSI: Provide pci_dev_has_special_msi_domain() helper PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI x86/irq: Initialize PCI/MSI domain at PCI init time x86/pci: Reducde #ifdeffery in PCI init code ...
2020-10-12Merge tag 'irq-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Allow trimming of interrupt hierarchy to support odd hardware setups where only a subset of the interrupts requires the full hierarchy. - Allow the retrigger mechanism to follow a hierarchy to simplify driver code. - Provide a mechanism to force enable wakeup interrrupts on suspend. - More infrastructure to handle IPIs in the core code Architectures: - Convert ARM/ARM64 IPI handling to utilize the interrupt core code. Drivers: - The usual pile of new interrupt chips (MStar, Actions Owl, TI PRUSS, Designware ICTL) - ARM(64) IPI related conversions - Wakeup support for Qualcom PDC - Prevent hierarchy corruption in the NVIDIA Tegra driver - The usual small fixes, improvements and cleanups all over the place" * tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) dt-bindings: interrupt-controller: Add MStar interrupt controller irqchip/irq-mst: Add MStar interrupt controller support soc/tegra: pmc: Don't create fake interrupt hierarchy levels soc/tegra: pmc: Allow optional irq parent callbacks gpio: tegra186: Allow optional irq parent callbacks genirq/irqdomain: Allow partial trimming of irq_data hierarchy irqchip/qcom-pdc: Reset PDC interrupts during init irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Use return value from irq_set_wake() call pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags ARM: Handle no IPI being registered in show_ipi_list() MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller irqchip: Add Actions Semi Owl SIRQ controller dt-bindings: interrupt-controller: Add Actions SIRQ controller binding dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller irqchip/dw-apb-ictl: Add primary interrupt controller support irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER ...
2020-10-12Merge tag 'timers-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping updates from Thomas Gleixner: "Updates for timekeeping, timers and related drivers: Core: - Early boot support for the NMI safe timekeeper by utilizing local_clock() up to the point where timekeeping is initialized. This allows printk() to store multiple timestamps in the ringbuffer which is useful for coordinating dmesg information across a fleet of machines. - Provide a multi-timestamp accessor for printk() - Make timer init more robust by checking for invalid timer flags. - Comma vs semicolon fixes Drivers: - Support for new platforms in existing drivers (SP804 and Renesas CMT) - Comma vs semicolon fixes * tag 'timers-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/armada-370-xp: Use semicolons rather than commas to separate statements clocksource/drivers/mps2-timer: Use semicolons rather than commas to separate statements timers: Mask invalid flags in do_init_timer() clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode clocksource/drivers/sp804: Add support for Hisilicon sp804 timer clocksource/drivers/sp804: Support non-standard register offset clocksource/drivers/sp804: Prepare for support non-standard register offset clocksource/drivers/sp804: Remove a mismatched comment clocksource/drivers/sp804: Delete the leading "__" of some functions clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h clocksource/drivers/sp804: Cleanup clk_get_sys() dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support alarmtimer: Convert comma to semicolon timekeeping: Provide multi-timestamp accessor to NMI safe timekeeper timekeeping: Utilize local_clock() for NMI safe timekeeper during early boot
2020-10-12Merge tag 'core-debugobjects-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects updates from Thomas Gleixner: "A small set of updates for debug objects: - Make all debug object descriptors constant. There is no reason to have them writeable. - Free the per CPU object pool after CPU unplug to avoid memory waste" * tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Free per CPU pool after CPU unplug treewide: Make all debug_obj_descriptors const debugobjects: Allow debug_obj_descr to be const
2020-10-12Merge tag 'x86_cleanups_for_v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: "Misc minor cleanups" * tag 'x86_cleanups_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Fix typo in comments for syscall_enter_from_user_mode() x86/resctrl: Fix spelling in user-visible warning messages x86/entry/64: Do not include inst.h in calling.h x86/mpparse: Remove duplicate io_apic.h include
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 08:11:41 +0000