summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2019-06-19xdp: page_pool related fix to cpumapJesper Dangaard Brouer
When converting an xdp_frame into an SKB, and sending this into the network stack, then the underlying XDP memory model need to release associated resources, because the network stack don't have callbacks for XDP memory models. The only memory model that needs this is page_pool, when a driver use the DMA-mapping feature. Introduce page_pool_release_page(), which basically does the same as page_pool_unmap_page(). Add xdp_release_frame() as the XDP memory model interface for calling it, if the memory model match MEM_TYPE_PAGE_POOL, to save the function call overhead for others. Have cpumap call xdp_release_frame() before xdp_scrub_frame(). Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-16Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes: - Repair the ktime_get_coarse() functions so they actually deliver what they are supposed to: tick granular time stamps. The current code missed to add the accumulated nanoseconds part of the timekeeper so the resulting granularity was 1 second. - Prevent the tracer from infinitely recursing into time getter functions in the arm architectured timer by marking these functions notrace - Fix a trivial compiler warning caused by wrong qualifier ordering" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Repair ktime_get_coarse*() granularity clocksource/drivers/arm_arch_timer: Don't trace count reader functions clocksource/drivers/timer-ti-dm: Change to new style declaration
2019-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-06-15 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix stack layout of JITed x64 bpf code, from Alexei. 2) fix out of bounds memory access in bpf_sk_storage, from Arthur. 3) fix lpm trie walk, from Jonathan. 4) fix nested bpf_perf_event_output, from Matt. 5) and several other fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15bpf: fix nested bpf tracepoints with per-cpu dataMatt Mullins
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as they do not increment bpf_prog_active while executing. This enables three levels of nesting, to support - a kprobe or raw tp or perf event, - another one of the above that irq context happens to call, and - another one in nmi context (at most one of which may be a kprobe or perf event). Fixes: 20b9d7ac4852 ("bpf: avoid excessive stack usage for perf_sample_data") Signed-off-by: Matt Mullins <mmullins@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-15Merge tag 'trace-v5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Out of range read of stack trace output - Fix for NULL pointer dereference in trace_uprobe_create() - Fix to a livepatching / ftrace permission race in the module code - Fix for NULL pointer dereference in free_ftrace_func_mapper() - A couple of build warning clean ups * tag 'trace-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print()
2019-06-14Merge branch 'for-5.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "This has an unusually high density of tricky fixes: - task_get_css() could deadlock when it races against a dying cgroup. - cgroup.procs didn't list thread group leaders with live threads. This could mislead readers to think that a cgroup is empty when it's not. Fixed by making PROCS iterator include dead tasks. I made a couple mistakes making this change and this pull request contains a couple follow-up patches. - When cpusets run out of online cpus, it updates cpusmasks of member tasks in bizarre ways. Joel improved the behavior significantly" * 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: restore sanity to cpuset_cpus_allowed_fallback() cgroup: Fix css_task_iter_advance_css_set() cset skip condition cgroup: css_task_iter_skip()'d iterators must be advanced before accessed cgroup: Include dying leaders with live threads in PROCS iterations cgroup: Implement css_task_iter_skip() cgroup: Call cgroup_release() before __exit_signal() docs cgroups: add another example size for hugetlb cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
2019-06-14sysctl: define proc_do_static_key()Eric Dumazet
Convert proc_dointvec_minmax_bpf_stats() into a more generic helper, since we are going to use jump labels more often. Note that sysctl_bpf_stats_enabled is removed, since it is no longer needed/used. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15bpf, devmap: Add missing RCU read lock on flushToshiaki Makita
.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net uses RCU to detect it has setup the resources for tx. The assumption accidentally broke when introducing bulk queue in devmap. Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-15bpf, devmap: Add missing bulk queue freeToshiaki Makita
dev_map_free() forgot to free bulk queue when freeing its entries. Fixes: 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking") Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-15bpf, devmap: Fix premature entry free on destroying mapToshiaki Makita
dev_map_free() waits for flush_needed bitmap to be empty in order to ensure all flush operations have completed before freeing its entries. However the corresponding clear_bit() was called before using the entries, so the entries could be used after free. All access to the entries needs to be done before clearing the bit. It seems commit a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") accidentally changed the clear_bit() and memory access order. Note that the problem happens only in __dev_map_flush(), not in dev_map_flush_old(). dev_map_flush_old() is called only after nulling out the corresponding netdev_map entry, so dev_map_free() never frees the entry thus no such race happens there. Fixes: a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-14ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper()Wei Li
The mapper may be NULL when called from register_ftrace_function_probe() with probe->data == NULL. This issue can be reproduced as follow (it may be covered by compiler optimization sometime): / # cat /sys/kernel/debug/tracing/set_ftrace_filter #### all functions enabled #### / # echo foo_bar:dump > /sys/kernel/debug/tracing/set_ftrace_filter [ 206.949100] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 206.952402] Mem abort info: [ 206.952819] ESR = 0x96000006 [ 206.955326] Exception class = DABT (current EL), IL = 32 bits [ 206.955844] SET = 0, FnV = 0 [ 206.956272] EA = 0, S1PTW = 0 [ 206.956652] Data abort info: [ 206.957320] ISV = 0, ISS = 0x00000006 [ 206.959271] CM = 0, WnR = 0 [ 206.959938] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000419f3a000 [ 206.960483] [0000000000000000] pgd=0000000411a87003, pud=0000000411a83003, pmd=0000000000000000 [ 206.964953] Internal error: Oops: 96000006 [#1] SMP [ 206.971122] Dumping ftrace buffer: [ 206.973677] (ftrace buffer empty) [ 206.975258] Modules linked in: [ 206.976631] Process sh (pid: 281, stack limit = 0x(____ptrval____)) [ 206.978449] CPU: 10 PID: 281 Comm: sh Not tainted 5.2.0-rc1+ #17 [ 206.978955] Hardware name: linux,dummy-virt (DT) [ 206.979883] pstate: 60000005 (nZCv daif -PAN -UAO) [ 206.980499] pc : free_ftrace_func_mapper+0x2c/0x118 [ 206.980874] lr : ftrace_count_free+0x68/0x80 [ 206.982539] sp : ffff0000182f3ab0 [ 206.983102] x29: ffff0000182f3ab0 x28: ffff8003d0ec1700 [ 206.983632] x27: ffff000013054b40 x26: 0000000000000001 [ 206.984000] x25: ffff00001385f000 x24: 0000000000000000 [ 206.984394] x23: ffff000013453000 x22: ffff000013054000 [ 206.984775] x21: 0000000000000000 x20: ffff00001385fe28 [ 206.986575] x19: ffff000013872c30 x18: 0000000000000000 [ 206.987111] x17: 0000000000000000 x16: 0000000000000000 [ 206.987491] x15: ffffffffffffffb0 x14: 0000000000000000 [ 206.987850] x13: 000000000017430e x12: 0000000000000580 [ 206.988251] x11: 0000000000000000 x10: cccccccccccccccc [ 206.988740] x9 : 0000000000000000 x8 : ffff000013917550 [ 206.990198] x7 : ffff000012fac2e8 x6 : ffff000012fac000 [ 206.991008] x5 : ffff0000103da588 x4 : 0000000000000001 [ 206.991395] x3 : 0000000000000001 x2 : ffff000013872a28 [ 206.991771] x1 : 0000000000000000 x0 : 0000000000000000 [ 206.992557] Call trace: [ 206.993101] free_ftrace_func_mapper+0x2c/0x118 [ 206.994827] ftrace_count_free+0x68/0x80 [ 206.995238] release_probe+0xfc/0x1d0 [ 206.995555] register_ftrace_function_probe+0x4a8/0x868 [ 206.995923] ftrace_trace_probe_callback.isra.4+0xb8/0x180 [ 206.996330] ftrace_dump_callback+0x50/0x70 [ 206.996663] ftrace_regex_write.isra.29+0x290/0x3a8 [ 206.997157] ftrace_filter_write+0x44/0x60 [ 206.998971] __vfs_write+0x64/0xf0 [ 206.999285] vfs_write+0x14c/0x2f0 [ 206.999591] ksys_write+0xbc/0x1b0 [ 206.999888] __arm64_sys_write+0x3c/0x58 [ 207.000246] el0_svc_common.constprop.0+0x408/0x5f0 [ 207.000607] el0_svc_handler+0x144/0x1c8 [ 207.000916] el0_svc+0x8/0xc [ 207.003699] Code: aa0003f8 a9025bf5 aa0103f5 f946ea80 (f9400303) [ 207.008388] ---[ end trace 7b6d11b5f542bdf1 ]--- [ 207.010126] Kernel panic - not syncing: Fatal exception [ 207.011322] SMP: stopping secondary CPUs [ 207.013956] Dumping ftrace buffer: [ 207.014595] (ftrace buffer empty) [ 207.015632] Kernel Offset: disabled [ 207.017187] CPU features: 0x002,20006008 [ 207.017985] Memory Limit: none [ 207.019825] ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190606031754.10798-1-liwei391@huawei.com Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14module: Fix livepatch/ftrace module text permissions raceJosh Poimboeuf
It's possible for livepatch and ftrace to be toggling a module's text permissions at the same time, resulting in the following panic: BUG: unable to handle page fault for address: ffffffffc005b1d9 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 3ea0c067 P4D 3ea0c067 PUD 3ea0e067 PMD 3cc13067 PTE 3b8a1061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 1 PID: 453 Comm: insmod Tainted: G O K 5.2.0-rc1-a188339ca5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:apply_relocate_add+0xbe/0x14c Code: fa 0b 74 21 48 83 fa 18 74 38 48 83 fa 0a 75 40 eb 08 48 83 38 00 74 33 eb 53 83 38 00 75 4e 89 08 89 c8 eb 0a 83 38 00 75 43 <89> 08 48 63 c1 48 39 c8 74 2e eb 48 83 38 00 75 32 48 29 c1 89 08 RSP: 0018:ffffb223c00dbb10 EFLAGS: 00010246 RAX: ffffffffc005b1d9 RBX: 0000000000000000 RCX: ffffffff8b200060 RDX: 000000000000000b RSI: 0000004b0000000b RDI: ffff96bdfcd33000 RBP: ffffb223c00dbb38 R08: ffffffffc005d040 R09: ffffffffc005c1f0 R10: ffff96bdfcd33c40 R11: ffff96bdfcd33b80 R12: 0000000000000018 R13: ffffffffc005c1f0 R14: ffffffffc005e708 R15: ffffffff8b2fbc74 FS: 00007f5f447beba8(0000) GS:ffff96bdff900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc005b1d9 CR3: 000000003cedc002 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: klp_init_object_loaded+0x10f/0x219 ? preempt_latency_start+0x21/0x57 klp_enable_patch+0x662/0x809 ? virt_to_head_page+0x3a/0x3c ? kfree+0x8c/0x126 patch_init+0x2ed/0x1000 [livepatch_test02] ? 0xffffffffc0060000 do_one_initcall+0x9f/0x1c5 ? kmem_cache_alloc_trace+0xc4/0xd4 ? do_init_module+0x27/0x210 do_init_module+0x5f/0x210 load_module+0x1c41/0x2290 ? fsnotify_path+0x3b/0x42 ? strstarts+0x2b/0x2b ? kernel_read+0x58/0x65 __do_sys_finit_module+0x9f/0xc3 ? __do_sys_finit_module+0x9f/0xc3 __x64_sys_finit_module+0x1a/0x1c do_syscall_64+0x52/0x61 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The above panic occurs when loading two modules at the same time with ftrace enabled, where at least one of the modules is a livepatch module: CPU0 CPU1 klp_enable_patch() klp_init_object_loaded() module_disable_ro() ftrace_module_enable() ftrace_arch_code_modify_post_process() set_all_modules_text_ro() klp_write_object_relocations() apply_relocate_add() *patches read-only code* - BOOM A similar race exists when toggling ftrace while loading a livepatch module. Fix it by ensuring that the livepatch and ftrace code patching operations -- and their respective permissions changes -- are protected by the text_mutex. Link: http://lkml.kernel.org/r/ab43d56ab909469ac5d2520c5d944ad6d4abd476.1560474114.git.jpoimboe@redhat.com Reported-by: Johannes Erdfelt <johannes@erdfelt.com> Fixes: 444d13ff10fb ("modules: add ro_after_init support") Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14tracing/uprobe: Fix obsolete comment on trace_uprobe_create()Eiichi Tsukata
Commit 0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for uprobe events") cleaned up the usage of trace_uprobe_create(), and the function has been no longer used for removing uprobe/uretprobe. Link: http://lkml.kernel.org/r/20190614074026.8045-2-devel@etsukata.com Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create()Eiichi Tsukata
Just like the case of commit 8b05a3a7503c ("tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()"), writing an incorrectly formatted string to uprobe_events can trigger NULL pointer dereference. Reporeducer: # echo r > /sys/kernel/debug/tracing/uprobe_events dmesg: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000079d12067 P4D 8000000079d12067 PUD 7b7ab067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1903 Comm: bash Not tainted 5.2.0-rc3+ #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:strchr+0x0/0x30 Code: c0 eb 0d 84 c9 74 18 48 83 c0 01 48 39 d0 74 0f 0f b6 0c 07 3a 0c 06 74 ea 19 c0 83 c8 01 c3 31 c0 c3 0f 1f 84 00 00 00 00 00 <0f> b6 07 89 f2 40 38 f0 75 0e eb 13 0f b6 47 01 48 83 c RSP: 0018:ffffb55fc0403d10 EFLAGS: 00010293 RAX: ffff993ffb793400 RBX: 0000000000000000 RCX: ffffffffa4852625 RDX: 0000000000000000 RSI: 000000000000002f RDI: 0000000000000000 RBP: ffffb55fc0403dd0 R08: ffff993ffb793400 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff993ff9cc1668 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f30c5147700(0000) GS:ffff993ffda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b628000 CR4: 00000000000006f0 Call Trace: trace_uprobe_create+0xe6/0xb10 ? __kmalloc_track_caller+0xe6/0x1c0 ? __kmalloc+0xf0/0x1d0 ? trace_uprobe_create+0xb10/0xb10 create_or_delete_trace_uprobe+0x35/0x90 ? trace_uprobe_create+0xb10/0xb10 trace_run_command+0x9c/0xb0 trace_parse_run_command+0xf9/0x1eb ? probes_open+0x80/0x80 __vfs_write+0x43/0x90 vfs_write+0x14a/0x2a0 ksys_write+0xa2/0x170 do_syscall_64+0x7f/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20190614074026.8045-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 0597c49c69d5 ("tracing/uprobes: Use dyn_event framework for uprobe events") Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14tracing: Make two symbols staticYueHaibing
Fix sparse warnings: kernel/trace/trace.c:6927:24: warning: symbol 'get_tracing_log_err' was not declared. Should it be static? kernel/trace/trace.c:8196:15: warning: symbol 'trace_instance_dir' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190614153210.24424-1-yuehaibing@huawei.com Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14tracing: avoid build warning with HAVE_NOP_MCOUNTVasily Gorbik
Selecting HAVE_NOP_MCOUNT enables -mnop-mcount (if gcc supports it) and sets CC_USING_NOP_MCOUNT. Reuse __is_defined (which is suitable for testing CC_USING_* defines) to avoid conditional compilation and fix the following gcc 9 warning on s390: kernel/trace/ftrace.c:2514:1: warning: ‘ftrace_code_disable’ defined but not used [-Wunused-function] Link: http://lkml.kernel.org/r/patch.git-1a82d13f33ac.your-ad-here.call-01559732716-ext-6629@work.hours Fixes: 2f4df0017baed ("tracing: Add -mcount-nop option support") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14tracing: Fix out-of-range read in trace_stack_print()Eiichi Tsukata
Puts range check before dereferencing the pointer. Reproducer: # echo stacktrace > trace_options # echo 1 > events/enable # cat trace > /dev/null KASAN report: ================================================================== BUG: KASAN: use-after-free in trace_stack_print+0x26b/0x2c0 Read of size 8 at addr ffff888069d20000 by task cat/1953 CPU: 0 PID: 1953 Comm: cat Not tainted 5.2.0-rc3+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 Call Trace: dump_stack+0x8a/0xce print_address_description+0x60/0x224 ? trace_stack_print+0x26b/0x2c0 ? trace_stack_print+0x26b/0x2c0 __kasan_report.cold+0x1a/0x3e ? trace_stack_print+0x26b/0x2c0 kasan_report+0xe/0x20 trace_stack_print+0x26b/0x2c0 print_trace_line+0x6ea/0x14d0 ? tracing_buffers_read+0x700/0x700 ? trace_find_next_entry_inc+0x158/0x1d0 s_show+0xea/0x310 seq_read+0xaa7/0x10e0 ? seq_escape+0x230/0x230 __vfs_read+0x7c/0x100 vfs_read+0x16c/0x3a0 ksys_read+0x121/0x240 ? kernel_write+0x110/0x110 ? perf_trace_sys_enter+0x8a0/0x8a0 ? syscall_slow_exit_work+0xa9/0x410 do_syscall_64+0xb7/0x390 ? prepare_exit_to_usermode+0x165/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f867681f910 Code: b6 fe ff ff 48 8d 3d 0f be 08 00 48 83 ec 08 e8 06 db 01 00 66 0f 1f 44 00 00 83 3d f9 2d 2c 00 00 75 10 b8 00 00 00 00 04 RSP: 002b:00007ffdabf23488 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f867681f910 RDX: 0000000000020000 RSI: 00007f8676cde000 RDI: 0000000000000003 RBP: 00007f8676cde000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000871 R11: 0000000000000246 R12: 00007f8676cde000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000000ec0 Allocated by task 1214: save_stack+0x1b/0x80 __kasan_kmalloc.constprop.0+0xc2/0xd0 kmem_cache_alloc+0xaf/0x1a0 getname_flags+0xd2/0x5b0 do_sys_open+0x277/0x5a0 do_syscall_64+0xb7/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1214: save_stack+0x1b/0x80 __kasan_slab_free+0x12c/0x170 kmem_cache_free+0x8a/0x1c0 putname+0xe1/0x120 do_sys_open+0x2c5/0x5a0 do_syscall_64+0xb7/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888069d20000 which belongs to the cache names_cache of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [ffff888069d20000, ffff888069d21000) The buggy address belongs to the page: page:ffffea0001a74800 refcount:1 mapcount:0 mapping:ffff88806ccd1380 index:0x0 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000200 ffff88806ccd1380 raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888069d1ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888069d1ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888069d20000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888069d20080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888069d20100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Link: http://lkml.kernel.org/r/20190610040016.5598-1-devel@etsukata.com Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-06-14timekeeping: Repair ktime_get_coarse*() granularityThomas Gleixner
Jason reported that the coarse ktime based time getters advance only once per second and not once per tick as advertised. The code reads only the monotonic base time, which advances once per second. The nanoseconds are accumulated on every tick in xtime_nsec up to a second and the regular time getters take this nanoseconds offset into account, but the ktime_get_coarse*() implementation fails to do so. Add the accumulated xtime_nsec value to the monotonic base time to get the proper per tick advancing coarse tinme. Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
2019-06-13mm/devm_memremap_pages: fix final page put raceDan Williams
Logan noticed that devm_memremap_pages_release() kills the percpu_ref drops all the page references that were acquired at init and then immediately proceeds to unplug, arch_remove_memory(), the backing pages for the pagemap. If for some reason device shutdown actually collides with a busy / elevated-ref-count page then arch_remove_memory() should be deferred until after that reference is dropped. As it stands the "wait for last page ref drop" happens *after* devm_memremap_pages_release() returns, which is obviously too late and can lead to crashes. Fix this situation by assigning the responsibility to wait for the percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup() callback. Implement the new cleanup callback for all devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma. Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-13mm/devm_memremap_pages: introduce devm_memunmap_pagesDan Williams
Use the new devm_release_action() facility to allow devm_memremap_pages_release() to be manually triggered. Link: http://lkml.kernel.org/r/155727337088.292046.5774214552136776763.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-12cpuset: restore sanity to cpuset_cpus_allowed_fallback()Joel Savitz
In the case that a process is constrained by taskset(1) (i.e. sched_setaffinity(2)) to a subset of available cpus, and all of those are subsequently offlined, the scheduler will set tsk->cpus_allowed to the current value of task_cs(tsk)->effective_cpus. This is done via a call to do_set_cpus_allowed() in the context of cpuset_cpus_allowed_fallback() made by the scheduler when this case is detected. This is the only call made to cpuset_cpus_allowed_fallback() in the latest mainline kernel. However, this is not sane behavior. I will demonstrate this on a system running the latest upstream kernel with the following initial configuration: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,fffffff Cpus_allowed_list: 0-63 (Where cpus 32-63 are provided via smt.) If we limit our current shell process to cpu2 only and then offline it and reonline it: # taskset -p 4 $$ pid 2272's current affinity mask: ffffffffffffffff pid 2272's new affinity mask: 4 # echo off > /sys/devices/system/cpu/cpu2/online # dmesg | tail -3 [ 2195.866089] process 2272 (bash) no longer affine to cpu2 [ 2195.872700] IRQ 114: no longer affine to CPU2 [ 2195.879128] smpboot: CPU 2 is now offline # echo on > /sys/devices/system/cpu/cpu2/online # dmesg | tail -1 [ 2617.043572] smpboot: Booting Node 0 Processor 2 APIC 0x4 We see that our current process now has an affinity mask containing every cpu available on the system _except_ the one we originally constrained it to: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,fffffffb Cpus_allowed_list: 0-1,3-63 This is not sane behavior, as the scheduler can now not only place the process on previously forbidden cpus, it can't even schedule it on the cpu it was originally constrained to! Other cases result in even more exotic affinity masks. Take for instance a process with an affinity mask containing only cpus provided by smt at the moment that smt is toggled, in a configuration such as the following: # taskset -p f000000000 $$ # grep -i cpu /proc/$$/status Cpus_allowed: 000000f0,00000000 Cpus_allowed_list: 36-39 A double toggle of smt results in the following behavior: # echo off > /sys/devices/system/cpu/smt/control # echo on > /sys/devices/system/cpu/smt/control # grep -i cpus /proc/$$/status Cpus_allowed: ffffff00,ffffffff Cpus_allowed_list: 0-31,40-63 This is even less sane than the previous case, as the new affinity mask excludes all smt-provided cpus with ids less than those that were previously in the affinity mask, as well as those that were actually in the mask. With this patch applied, both of these cases end in the following state: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,ffffffff Cpus_allowed_list: 0-63 The original policy is discarded. Though not ideal, it is the simplest way to restore sanity to this fallback case without reinventing the cpuset wheel that rolls down the kernel just fine in cgroup v2. A user who wishes for the previous affinity mask to be restored in this fallback case can use that mechanism instead. This patch modifies scheduler behavior by instead resetting the mask to task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy mode. I tested the cases above on both modes. Note that the scheduler uses this fallback mechanism if and only if _every_ other valid avenue has been traveled, and it is the last resort before calling BUG(). Suggested-by: Waiman Long <longman@redhat.com> Suggested-by: Phil Auld <pauld@redhat.com> Signed-off-by: Joel Savitz <jsavitz@redhat.com> Acked-by: Phil Auld <pauld@redhat.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2019-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace fixes from Eric Biederman: "This is just two very minor fixes: - prevent ptrace from reading unitialized kernel memory found twice by syzkaller - restore a missing smp_rmb in ptrace_may_access and add comment tp it so it is not removed by accident again. Apologies for being a little slow about getting this to you, I am still figuring out how to develop with a little baby in the house" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: restore smp_rmb() in __ptrace_may_access() signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
2019-06-11ptrace: restore smp_rmb() in __ptrace_may_access()Jann Horn
Restore the read memory barrier in __ptrace_may_access() that was deleted a couple years ago. Also add comments on this barrier and the one it pairs with to explain why they're there (as far as I understand). Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks") Cc: stable@vger.kernel.org Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2019-06-11bpf: lpm_trie: check left child of last leftmost node for NULLJonathan Lemon
If the leftmost parent node of the tree has does not have a child on the left side, then trie_get_next_key (and bpftool map dump) will not look at the child on the right. This leads to the traversal missing elements. Lookup is not affected. Update selftest to handle this case. Reproducer: bpftool map create /sys/fs/bpf/lpm type lpm_trie key 6 \ value 1 entries 256 name test_lpm flags 1 bpftool map update pinned /sys/fs/bpf/lpm key 8 0 0 0 0 0 value 1 bpftool map update pinned /sys/fs/bpf/lpm key 16 0 0 0 0 128 value 2 bpftool map dump pinned /sys/fs/bpf/lpm Returns only 1 element. (2 expected) Fixes: b471f2f1de8b ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-10cgroup: Fix css_task_iter_advance_css_set() cset skip conditionTejun Heo
While adding handling for dying task group leaders c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") added an inverted cset skip condition to css_task_iter_advance_css_set(). It should skip cset if it's completely empty but was incorrectly testing for the inverse condition for the dying_tasks list. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com
2019-06-10cgroup/bfq: revert bfq.weight symlink changeJens Axboe
There's some discussion on how to do this the best, and Tejun prefers that BFQ just create the file itself instead of having cgroups support a symlink feature. Hence revert commit 54b7b868e826 and 19e9da9e86c4 for 5.2, and this can be done properly for 5.3. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-08Merge tag 'char-misc-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac46861 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
2019-06-08Merge tag 'for-linus-20190608' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Allow symlink from the bfq.weight cgroup parameter to the general weight (Angelo) - Damien is new skd maintainer (Bart) - NVMe pull request from Sagi, with a few small fixes. - Ensure we set DMA segment size properly, dma-debug is now tripping on these (Christoph) - Remove useless debugfs_create() return check (Greg) - Remove redundant unlikely() check on IS_ERR() (Kefeng) - Fixup request freeing on exit (Ming) * tag 'for-linus-20190608' of git://git.kernel.dk/linux-block: block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file block: free sched's request pool in blk_cleanup_queue nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size block: Drop unlikely before IS_ERR(_OR_NULL) block: aoe: no need to check return value of debugfs_create functions nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-06-07 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix several bugs in riscv64 JIT code emission which forgot to clear high 32-bits for alu32 ops, from Björn and Luke with selftests covering all relevant BPF alu ops from Björn and Jiong. 2) Two fixes for UDP BPF reuseport that avoid calling the program in case of __udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption that skb->data is pointing to transport header, from Martin. 3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog workqueue, and a missing restore of sk_write_space when psock gets dropped, from Jakub and John. 4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it breaks standard applications like DNS if reverse NAT is not performed upon receive, from Daniel. 5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6 fails to verify that the length of the tuple is long enough, from Lorenz. 6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for {un,}successful probe) as that is expected to be propagated as an fd to load_sk_storage_btf() and thus closing the wrong descriptor otherwise, from Michal. 7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir. 8) Minor misc fixes in docs, samples and selftests, from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge tag 'pm-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a crash during resume from hibernation introduced during the 4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code to be built only if CONFIG_PM is set and add a few missing kerneldoc comments. Specifics: - Fix a crash that occurs when a kernel with 'nosmt' in the command line is used to resume the system from hibernation (as the "restore" kernel), because memory mapping differences between the restore and image kernels cause SMT siblings to be woken up from idle states and subsequently they try to fetch instructions from incorrect memory locations (Jiri Kosina). - Cause the new Performance and Energy Bias Hint (EPB) code to be built only if CONFIG_PM is set, because that code is not really necessary otherwise (Rafael Wysocki). - Add kerneldoc comments to documents some helper functions related to system-wide suspend to avoid possible confusion regarding their purpose (Rafael Wysocki)" * tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: x86/power: Fix 'nosmt' vs hibernation triple fault during resume PM: sleep: Add kerneldoc comments to some functions x86: intel_epb: Do not build when CONFIG_PM is unset
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07Merge branch 'pm-x86'Rafael J. Wysocki
* pm-x86: x86/power: Fix 'nosmt' vs hibernation triple fault during resume x86: intel_epb: Do not build when CONFIG_PM is unset
2019-06-07cgroup: let a symlink too be created with a cftype fileAngelo Ruocco
This commit enables a cftype to have a symlink (of any name) that points to the file associated with the cftype. Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-06bpf: fix unconnected udp hooksDaniel Borkmann
Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently to applications as also stated in original motivation in 7828f20e3779 ("Merge branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter two hooks into Cilium to enable host based load-balancing with Kubernetes, I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes typically sets up DNS as a service and is thus subject to load-balancing. Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API is currently insufficient and thus not usable as-is for standard applications shipped with most distros. To break down the issue we ran into with a simple example: # cat /etc/resolv.conf nameserver 147.75.207.207 nameserver 147.75.207.208 For the purpose of a simple test, we set up above IPs as service IPs and transparently redirect traffic to a different DNS backend server for that node: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 The attached BPF program is basically selecting one of the backends if the service IP/port matches on the cgroup hook. DNS breaks here, because the hooks are not transparent enough to applications which have built-in msg_name address checks: # nslookup 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ;; connection timed out; no servers could be reached # dig 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; connection timed out; no servers could be reached For comparison, if none of the service IPs is used, and we tell nslookup to use 8.8.8.8 directly it works just fine, of course: # nslookup 1.1.1.1 8.8.8.8 1.1.1.1.in-addr.arpa name = one.one.one.one. In order to fix this and thus act more transparent to the application, this needs reverse translation on recvmsg() side. A minimal fix for this API is to add similar recvmsg() hooks behind the BPF cgroups static key such that the program can track state and replace the current sockaddr_in{,6} with the original service IP. From BPF side, this basically tracks the service tuple plus socket cookie in an LRU map where the reverse NAT can then be retrieved via map value as one example. Side-note: the BPF cgroups static key should be converted to a per-hook static key in future. Same example after this fix: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 Lookups work fine now: # nslookup 1.1.1.1 1.1.1.1.in-addr.arpa name = one.one.one.one. Authoritative answers can be found from: # dig 1.1.1.1 ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;1.1.1.1. IN A ;; AUTHORITY SECTION: . 23426 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400 ;; Query time: 17 msec ;; SERVER: 147.75.207.207#53(147.75.207.207) ;; WHEN: Tue May 21 12:59:38 UTC 2019 ;; MSG SIZE rcvd: 111 And from an actual packet level it shows that we're using the back end server when talking via 147.75.207.20{7,8} front end: # tcpdump -i any udp [...] 12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) [...] In order to be flexible and to have same semantics as in sendmsg BPF programs, we only allow return codes in [1,1] range. In the sendmsg case the program is called if msg->msg_name is present which can be the case in both, connected and unconnected UDP. The former only relies on the sockaddr_in{,6} passed via connect(2) if passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar way to call into the BPF program whenever a non-NULL msg->msg_name was passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note that for TCP case, the msg->msg_name is ignored in the regular recvmsg path and therefore not relevant. For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE, the hook is not called. This is intentional as it aligns with the same semantics as in case of TCP cgroup BPF hooks right now. This might be better addressed in future through a different bpf_attach_type such that this case can be distinguished from the regular recvmsg paths, for example. Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-05cgroup: css_task_iter_skip()'d iterators must be advanced before accessedTejun Heo
b636fd38dc40 ("cgroup: Implement css_task_iter_skip()") introduced css_task_iter_skip() which is used to fix task iterations skipping dying threadgroup leaders with live threads. Skipping is implemented as a subportion of full advancing but css_task_iter_next() forgot to fully advance a skipped iterator before determining the next task to visit causing it to return invalid task pointers. Fix it by making css_task_iter_next() fully advance the iterator if it has been skipped since the previous iteration. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: syzbot Link: http://lkml.kernel.org/r/00000000000097025d058a7fd785@google.com Fixes: b636fd38dc40 ("cgroup: Implement css_task_iter_skip()")
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436Thomas Gleixner
Based on 1 normalized pattern(s): distributed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.032570679@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430Thomas Gleixner
Based on 1 normalized pattern(s): distribute under gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 8 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.475576622@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 363Thomas Gleixner
Based on 1 normalized pattern(s): released under terms in gpl version 2 see copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081035.689962394@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05signal: improve commentsChristian Brauner
Improve the comments for pidfd_send_signal(). First, the comment still referred to a file descriptor for a process as a "task file descriptor" which stems from way back at the beginning of the discussion. Replace this with "pidfd" for consistency. Second, the wording for the explanation of the arguments to the syscall was a bit inconsistent, e.g. some used the past tense some used present tense. Make the wording more consistent. Signed-off-by: Christian Brauner <christian@brauner.io>
2019-06-03x86/power: Fix 'nosmt' vs hibernation triple fault during resumeJiri Kosina
As explained in 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") we always, no matter what, have to bring up x86 HT siblings during boot at least once in order to avoid first MCE bringing the system to its knees. That means that whenever 'nosmt' is supplied on the kernel command-line, all the HT siblings are as a result sitting in mwait or cpudile after going through the online-offline cycle at least once. This causes a serious issue though when a kernel, which saw 'nosmt' on its commandline, is going to perform resume from hibernation: if the resume from the hibernated image is successful, cr3 is flipped in order to point to the address space of the kernel that is being resumed, which in turn means that all the HT siblings are all of a sudden mwaiting on address which is no longer valid. That results in triple fault shortly after cr3 is switched, and machine reboots. Fix this by always waking up all the SMT siblings before initiating the 'restore from hibernation' process; this guarantees that all the HT siblings will be properly carried over to the resumed kernel waiting in resume_play_dead(), and acted upon accordingly afterwards, based on the target kernel configuration. Symmetricaly, the resumed kernel has to push the SMT siblings to mwait again in case it has SMT disabled; this means it has to online all the siblings when resuming (so that they come out of hlt) and offline them again to let them reach mwait. Cc: 4.19+ <stable@vger.kernel.org> # v4.19+ Debugged-by: Thomas Gleixner <tglx@linutronix.de> Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-03PM: sleep: Add kerneldoc comments to some functionsRafael J. Wysocki
Add kerneldoc comments to pm_suspend_via_firmware(), pm_resume_via_firmware() and pm_suspend_via_s2idle() to explain what they do. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's a bunch of ring-buffer ordering fixes for a reproducible bug, plus a PEBS constraints regression fix. Plus tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Fix s390 missing module symbol and warning for non-root users perf machine: Read also the end of the kernel perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms perf session: Add missing swap ops for namespace events perf namespace: Protect reading thread's namespace tools headers UAPI: Sync drm/drm.h with the kernel tools headers UAPI: Sync drm/i915_drm.h with the kernel tools headers UAPI: Sync linux/fs.h with the kernel tools headers UAPI: Sync linux/sched.h with the kernel tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel perf data: Fix 'strncat may truncate' build failure with recent gcc perf/ring-buffer: Use regular variables for nesting perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data perf/ring_buffer: Add ordering to rb->nest increment perf/ring_buffer: Fix exposing a temporarily decreased data_head perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints