summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2009-09-18rcu: Simplify rcu_read_unlock_special() quiescent-state accountingPaul E. McKenney
The earlier approach required two scheduling-clock ticks to note an preemptable-RCU quiescent state in the situation in which the scheduling-clock interrupt is unlucky enough to always interrupt an RCU read-side critical section. With this change, the quiescent state is instead noted by the outermost rcu_read_unlock() immediately following the first scheduling-clock tick, or, alternatively, by the first subsequent context switch. Therefore, this change also speeds up grace periods. Suggested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <12528585111945-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18rcu: Add debug checks to TREE_PREEMPT_RCU for premature grace periodsPaul E. McKenney
Check to make sure that there are no blocked tasks for the previous grace period while initializing for the next grace period, verify that rcu_preempt_qs() is given the correct CPU number and is never called for an offline CPU. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <12528585111986-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18rcutorture: Occasionally delay readers enough to make RCU force_quiescent_stateJosh Triplett
rcutorture already delays readers, but never for long enough to make RCU force a quiescent state. Add an occasional delay of 50ms. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org LKML-Reference: <12524504772607-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18rcu: Initialize multi-level RCU grace periods holding locksPaul E. McKenney
Prior implementations initialized the root and any internal nodes without holding locks, then initialized the leaves holding locks. This is a false economy, as the leaf nodes will usually greatly outnumber the root and internal nodes. Acquiring locks on all nodes is conceptually much simpler as well. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org LKML-Reference: <12524504773190-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18rcu: Need to update rnp->gpnum if preemptable RCU is to be reliablePaul E. McKenney
Without this patch, tasks preempted in RCU read-side critical sections can fail to block the grace period, given that rnp->gpnum is used to determine which rnp->blocked_tasks[] element the preempted task is enqueued on. Before the patch, rnp->gpnum is always zero, so preempted tasks are always enqueued on rnp->blocked_tasks[0], which is correct only when the current CPU has not checked into the current grace period and the grace-period number is even, or, similarly, if the current CPU -has- checked into the current grace period and the grace-period number is odd. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org LKML-Reference: <12524504771622-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17perf_counter: Allow for a wakeup watermarkPeter Zijlstra
Currently we wake the mmap() consumer once every PAGE_SIZE of data and/or once event wakeup_events when specified. For high speed sampling this results in too many wakeups wrt. the buffer size, hence change this. We move the default wakeup limit to 1/4-th the buffer size, and provide for means to manually specify this limit. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17perf_counter: Do not throttle single swcounter eventsPeter Zijlstra
We can have swcounter events that contribute more than a single count per event, when used with a non-zero period, those can generate multiple events, which is when we need throttling. However, swcounter that contribute only a single count per event can only come as fast as we can run code, hence don't throttle them. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17softirq: add BLOCK_IOPOLL to softirq_to_nameLi Zefan
With BLOCK_IOPOLL_SOFTIRQ added, softirq_to_name[] and show_softirq_name() needs to be updated. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4AB20398.8070209@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-17tracing: switch function prints from %pf to %psSteven Rostedt
For direct function pointers (like what mcount provides) PowerPC64 requires the use of %ps, otherwise nothing is printed. This patch converts all prints of functions retrieved through mcount to use the %ps format from the %pf. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-17Merge branch 'linus' into tracing/coreIngo Molnar
Merge reason: Pick up kernel/softirq.c update for dependent fix. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINEPeter Zijlstra
The SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL code can break out of the domain iteration early, making us miss the SD_WAKE_AFFINE bits. Fix this by continuing iteration until there is no need for a larger domain. This also cleans up the cgroup stuff a bit, but not having two update_shares() invocations. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17sched: Stop buddies from hogging the systemPeter Zijlstra
Clear buddies more agressively. The (theoretical, haven't actually observed any of this) problem is that when we do not select either buddy in pick_next_entity() because they are too far ahead of the left-most task, we do not clear the buddies. This means that as soon as we service the left-most task, these same buddies will be tried again on the next schedule. Now if the left-most task was a pure hog, it wouldn't have done any wakeups and it wouldn't have set buddies of its own. That leads to the old buddies dominating, which would lead to bad latencies. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-17sched: Add new wakeup preemption mode: WAKEUP_RUNNINGPeter Zijlstra
Create a new wakeup preemption mode, preempt towards tasks that run shorter on avg. It sets next buddy to be sure we actually run the task we preempted for. Test results: root@twins:~# while :; do :; done & [1] 6537 root@twins:~# while :; do :; done & [2] 6538 root@twins:~# while :; do :; done & [3] 6539 root@twins:~# while :; do :; done & [4] 6540 root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 4750 usec Avg 497 usec Stdev 737 usec root@twins:/home/peter# echo WAKEUP_RUNNING > /debug/sched_features root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 14 usec Avg 5 usec Stdev 3 usec Disabled by default - needs more testing. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <new-submission>
2009-09-17sched: Fix TASK_WAKING & loadaverage breakageIngo Molnar
Fix this: top - 21:54:00 up 2:59, 1 user, load average: 432512.33, 426421.74, 417432.74 Which happens because we now set TASK_WAKING before activate_task(). Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev debugfs: Modify default debugfs directory for debugging pktcdvd. debugfs: Modified default dir of debugfs for debugging UHCI. debugfs: Change debugfs directory of IWMC3200 debugfs: Change debuhgfs directory of trace-events-sample.h debugfs: Fix mount directory of debugfs by default in events.txt hpilo: add poll f_op hpilo: add interrupt handler hpilo: staging for interrupt handling driver core: platform_device_add_data(): use kmemdup() Driver core: Add support for compatibility classes uio: add generic driver for PCI 2.3 devices driver-core: move dma-coherent.c from kernel to driver/base mem_class: fix bug mem_class: use minor as index instead of searching the array driver model: constify attribute groups UIO: remove 'default n' from Kconfig Driver core: Add accessor for device platform data Driver core: move dev_get/set_drvdata to drivers/base/dd.c Driver core: add new device to bus's list before probing
2009-09-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix linkage problem with blk_iopoll and !CONFIG_BLOCK
2009-09-16sched: Rename flags to wake_flagsPeter Zijlstra
For consistencies sake, rename the argument (again). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16sched: Clean up the load_idx selection in select_task_rq_fairPeter Zijlstra
Clean up the code a little. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16sched: Optimize cgroup vs wakeup a bitPeter Zijlstra
We don't need to call update_shares() for each domain we iterate, just got the largets one. However, we should call it before wake_affine() as well, so that that can use up-to-date values too. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16tracing: Fix minor bugs for __unregister_ftrace_function_probeAtsushi Tsuji
Fix the condition of strcmp for "*". Also fix NULL pointer dereference when glob is NULL. Signed-off-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com> LKML-Reference: <4AAF6726.5090905@bk.jp.nec.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-16sched: Implement a gentler fair-sleepers featureIngo Molnar
Add back FAIR_SLEEPERS and GENTLE_FAIR_SLEEPERS. FAIR_SLEEPERS is the old logic: credit sleepers with their sleep time. GENTLE_FAIR_SLEEPERS dampens this a bit: 50% of their sleep time gets credited. The hope here is to still give the benefits of fair-sleepers logic (quick wakeups, etc.) while not allow them to have 100% of their sleep time as if they were running. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16sched: Add SD_PREFER_LOCALPeter Zijlstra
And turn it on for NUMA and MC domains. This improves locality in balancing decisions by keeping up to capacity amount of tasks local before looking for idle CPUs. (and twice the capacity if SD_POWERSAVINGS_BALANCE is set.) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15block: fix linkage problem with blk_iopoll and !CONFIG_BLOCKJens Axboe
kernel/built-in.o:(.data+0x17b0): undefined reference to `blk_iopoll_enabled' Since the extern declaration makes the compile work, but the actual symbol is missing when block/blk-iopoll.o isn't linked in. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-15sched: Add a few SYNC hint knobs to play withPeter Zijlstra
Currently we use overlap to weaken the SYNC hint, but allow it to set the hint as well. echo NO_SYNC_WAKEUP > /debug/sched_features echo SYNC_MORE > /debug/sched_features preserves pipe-test behaviour without using the WF_SYNC hint. Worth playing with on more workloads... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Fix sync wakeups againPeter Zijlstra
The sync argument rename to introduce WF_* broke stuff by missing a local alias for an argument in __wake_up_common, fix it by using the more descriptive wake_flags name. This restores WF_SYNC propagation, which fixes wake_affine() behaviour, which fixes pipe-test. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
2009-09-15driver-core: move dma-coherent.c from kernel to driver/baseMing Lei
Placing dma-coherent.c in driver/base is better than in kernel, since it contains code to do per-device coherent dma memory handling. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits) powerpc64: convert to dynamic percpu allocator sparc64: use embedding percpu first chunk allocator percpu: kill lpage first chunk allocator x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA percpu: update embedding first chunk allocator to handle sparse units percpu: use group information to allocate vmap areas sparsely vmalloc: implement pcpu_get_vm_areas() vmalloc: separate out insert_vmalloc_vm() percpu: add chunk->base_addr percpu: add pcpu_unit_offsets[] percpu: introduce pcpu_alloc_info and pcpu_group_info percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward percpu: add @align to pcpu_fc_alloc_fn_t percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() percpu: drop @static_size from first chunk allocators percpu: generalize first chunk allocator selection percpu: build first chunk allocators selectively percpu: rename 4k first chunk allocator to page percpu: improve boot messages percpu: fix pcpu_reclaim() locking ... Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Fix buffer overflow in perf_copy_attr()
2009-09-15tracing: optimize global_trace_clock cachelinesSteven Rostedt
The prev_trace_clock_time is only read or written to when the trace_clock_lock is taken. For better perfomance, they should share the same cache line. Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-15Merge branch 'x86-pat-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pat: Fix cacheflush address in change_page_attr_set_clr() mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set x86: Fix earlyprintk=dbgp for machines without NX x86, pat: Sanity check remap_pfn_range for RAM region x86, pat: Lookup the protection from memtype list on vm_insert_pfn() x86, pat: Add lookup_memtype to get the current memtype of a paddr x86, pat: Use page flags to track memtypes of RAM pages x86, pat: Generalize the use of page flag PG_uncached x86, pat: Add rbtree to do quick lookup in memtype tracking x86, pat: Add PAT reserve free to io_mapping* APIs x86, pat: New i/f for driver to request memtype for IO regions x86, pat: ioremap to follow same PAT restrictions as other PAT users x86, pat: Keep identity maps consistent with mmaps even when pat_disabled x86, mtrr: make mtrr_aps_delayed_init static bool x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled x86: Fix an incorrect argument of reserve_bootmem() x86: Fix system crash when loading with "reservetop" parameter
2009-09-15Merge branch 'x86-txt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, intel_txt: clean up the impact on generic code, unbreak non-x86 x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE x86, intel_txt: Fix typos in Kconfig help x86, intel_txt: Factor out the code for S3 setup x86, intel_txt: tboot.c needs <asm/fixmap.h> intel_txt: Force IOMMU on for Intel TXT launch x86, intel_txt: Intel TXT Sx shutdown support x86, intel_txt: Intel TXT reboot/halt shutdown support x86, intel_txt: Intel TXT boot support
2009-09-15sched: Add WF_FORKPeter Zijlstra
Avoid the cache buddies from biasing the time distribution away from fork()ers. Normally the next buddy will be the preferred scheduling target, but this makes fork()s prefer to run the new child, whereas we prefer to run the parent, since that will generate more work. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Rename sync argumentsPeter Zijlstra
In order to extend the functions to have more than 1 flag (sync), rename the argument to flags, and explicitly define a WF_ space for individual flags. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Rename select_task_rq() argumentPeter Zijlstra
In order to be able to rename the sync argument, we need to rename the current flag argument. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Feature to disable APERF/MPERF cpu_powerPeter Zijlstra
I suspect a feed-back loop between cpuidle and the aperf/mperf cpu_power bits, where when we have idle C-states lower the ratio, which leads to lower cpu_power and then less load, which generates more idle time, etc.. Put in a knob to disable it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Provide arch_scale_freq_powerPeter Zijlstra
Provide an ach specific hook for cpufreq based scaling of cpu_power. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> [ego@in.ibm.com: spotting bugs] LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Improve latencies and throughputMike Galbraith
Make the idle balancer more agressive, to improve a x264 encoding workload provided by Jason Garrett-Glaser: NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 252.82 fps, 22096.60 kb/s encoded 600 frames, 250.69 fps, 22096.60 kb/s encoded 600 frames, 245.76 fps, 22096.60 kb/s NO_NEXT_BUDDY LB_BIAS encoded 600 frames, 344.44 fps, 22096.60 kb/s encoded 600 frames, 346.66 fps, 22096.60 kb/s encoded 600 frames, 352.59 fps, 22096.60 kb/s NO_NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 425.75 fps, 22096.60 kb/s encoded 600 frames, 425.45 fps, 22096.60 kb/s encoded 600 frames, 422.49 fps, 22096.60 kb/s Peter pointed out that this is better done via newidle_idx, not via LB_BIAS, newidle balancing should look for where there is load _now_, not where there was load 2 ticks ago. Worst-case latencies are improved as well as no buddies means less vruntime spread. (as per prior lkml discussions) This change improves kbuild-peak parallelism as well. Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1253011667.9128.16.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Tweak wake_idxPeter Zijlstra
When merging select_task_rq_fair() and sched_balance_self() we lost the use of wake_idx, restore that and set them to 0 to make wake balancing more aggressive. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Fix task affinity for select_task_rq_fairPeter Zijlstra
While merging select_task_rq_fair() and sched_balance_self() I made a mistake that leads to testing the wrong task affinty. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: for_each_domain() vs RCUPeter Zijlstra
for_each_domain() uses RCU to serialize the sched_domains, except it doesn't actually use rcu_read_lock() and instead relies on disabling preemption -> FAIL. XXX: audit other sched_domain code. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Weaken SD_POWERSAVINGS_BALANCEPeter Zijlstra
One of the problems of power-saving balancing is that under certain scenarios it is too slow and allows tons of real work to pile up. Avoid this by ignoring the powersave stuff when there's real work to be done. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Merge select_task_rq_fair() and sched_balance_self()Peter Zijlstra
The problem with wake_idle() is that is doesn't respect things like cpu_power, which means it doesn't deal well with SMT nor the recent RT interaction. To cure this, it needs to do what sched_balance_self() does, which leads to the possibility of merging select_task_rq_fair() and sched_balance_self(). Modify sched_balance_self() to: - update_shares() when walking up the domain tree, (it only called it for the top domain, but it should have done this anyway), which allows us to remove this ugly bit from try_to_wake_up(). - do wake_affine() on the smallest domain that contains both this (the waking) and the prev (the wakee) cpu for WAKE invocations. Then use the top-down balance steps it had to replace wake_idle(). This leads to the dissapearance of SD_WAKE_BALANCE and SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE. SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective. Touch all topology bits to replace the old with new SD flags -- platforms might need re-tuning, enabling SD_BALANCE_WAKE conditionally on a NUMA distance seems like a good additional feature, magny-core and small nehalem systems would want this enabled, systems with slow interconnects would not. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Add TASK_WAKINGPeter Zijlstra
We're going to want to drop rq->lock in try_to_wake_up() for a longer period of time, however we also want to deal with concurrent waking of the same task, which is currently handled by holding rq->lock. So introduce a new TASK state, namely TASK_WAKING, which indicates someone is already waking the task (other wakers will fail p->state & state). We also keep preemption disabled over the whole ttwu(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Hook sched_balance_self() into sched_class::select_task_rq()Peter Zijlstra
Rather ugly patch to fully place the sched_balance_self() code inside the fair class. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Move sched_balance_self() into sched_fair.cPeter Zijlstra
Move the sched_balance_self() code into sched_fair.c This facilitates the merger of sched_balance_self() and sched_fair::select_task_rq(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Move code aroundPeter Zijlstra
In preparation to other code movement, move weighted_cpuload(), source_load() and target_load() before the class includes. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Add come comments to the sched featuresPeter Zijlstra
Add text... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Complete buddy switchesMike Galbraith
Add a NEXT_BUDDY feature flag to aid in debugging. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Split WAKEUP_OVERLAPPeter Zijlstra
It consists of two conditions, split them out in separate toggles so we can test them independently. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 07:55:17 +0000