| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This time the majority of changes go to the cpufreq subsystem (and to
the intel_pstate driver in particular) and there are some updates in
the generic power domains framework, cpuidle, tools and a couple of
other places.
One thing worth mentioning is that the intel_pstate's sysfs interface
has been reworked to be more consistent with the general expectations
of the cpufreq core and less confusing, hopefully for the better.
Also, we have a new cpufreq driver for Tegra186 and new hardware
support in intel_pstata and the Mediatek cpufreq driver.
Apart from that, the AnalyzeSuspend utility for system suspend
profiling gets a companion called AnalyzeBoot for the analogous
profiling of system boot and they both go into one place under
tools/power/pm-graph/.
The rest is mostly fixes, cleanups and code reorganization.
Specifics:
- Rework the intel_pstate driver's sysfs interface to make it more
straightforward and more intuitive (Rafael Wysocki).
- Make intel_pstate support all processors which advertise HWP
(hardware-managed P-states) to the kernel in all operation modes
and make it use the load-based P-state selection algorithm on a
wider range of systems in the active mode (Rafael Wysocki).
- Add cpufreq driver for Tegra186 (Mikko Perttunen).
- Add support for Gemini Lake SoCs to intel_pstate (David Box).
- Add support for MT8176 and MT817x to the Mediatek cpufreq driver
and clean up that driver a bit (Daniel Kurtz).
- Clean up intel_pstate and optimize it slightly (Rafael Wysocki).
- Update the schedutil cpufreq governor, mostly to fix a couple of
issues with it related to specific workloads, and rework its sysfs
tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).
- Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
(Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
YuanTian Tang).
- Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
Uytterhoeven).
- Add support for "always on" power domains to the genpd (generic
power domains) framework and clean up that code somewhat (Ulf
Hansson, Lina Iyer, Viresh Kumar).
- Fix minor issues in the powernv cpuidle driver and clean it up
(Anton Blanchard, Gautham Shenoy).
- Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add
an analogous boot-profiling utility called AnalyzeBoot to it (Todd
Brandt).
- Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
Scaling) driver (David Wu).
- Fix minor issues in the cpuidle core, the intel_pstate_tracer
utility, the devfreq framework and the PM core documentation
(Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)"
* tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
PM / runtime: Document autosuspend-helper side effects
PM / runtime: Fix autosuspend documentation
tools: power: pm-graph: Package makefile and man pages
tools: power: pm-graph: AnalyzeBoot v2.0
tools: power: pm-graph: AnalyzeSuspend v4.6
cpufreq: Add Tegra186 cpufreq driver
cpufreq: imx6q: Fix error handling code
cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
cpuidle: powernv: Don't continually set thread priority in snooze_loop()
cpuidle: powernv: Don't bounce between low and very low thread priority
cpuidle: cpuidle-cps: remove unused variable
tools/power/x86/intel_pstate_tracer: Adjust directory ownership
cpufreq: schedutil: Use policy-dependent transition delays
cpufreq: schedutil: Reduce frequencies slower
PM / devfreq: Move struct devfreq_governor to devfreq directory
PM / Domains: Ignore domain-idle-states that are not compatible
cpufreq: intel_pstate: Add support for Gemini Lake
powernv-cpuidle: Validate DT property array size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Nothing major. Two notable fixes are Li's second stab at fixing the
long-standing race condition in the mount path and suppression of
spurious warning from cgroup_get(). All other changes are trivial"
* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: mark cgroup_get() with __maybe_unused
cgroup: avoid attaching a cgroup root to two different superblocks, take 2
cgroup: fix spurious warnings on cgroup_is_dead() from cgroup_sk_alloc()
cgroup: move cgroup_subsys_state parent field for cache locality
cpuset: Remove cpuset_update_active_cpus()'s parameter.
cgroup: switch to BUG_ON()
cgroup: drop duplicate header nsproxy.h
kernel: convert css_set.refcount from atomic_t to refcount_t
kernel: convert cgroup_namespace.count from atomic_t to refcount_t
|
|
Pull workqueue update from Tejun Heo:
"One trivial patch to use setup_deferrable_timer() instead of
open-coding the initialization"
* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use setup_deferrable_timer
|
|
'for-4.12/klp-hybrid-consistency-model' into for-linus
|
|
a590b90d472f ("cgroup: fix spurious warnings on cgroup_is_dead() from
cgroup_sk_alloc()") converted most cgroup_get() usages to
cgroup_get_live() leaving cgroup_sk_alloc() the sole user of
cgroup_get(). When !CONFIG_SOCK_CGROUP_DATA, this ends up triggering
unused warning for cgroup_get().
Silence the warning by adding __maybe_unused to cgroup_get().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20170501145340.17e8ef86@canb.auug.org.au
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
|
|
llvm 4.0 and above generates the code like below:
....
440: (b7) r1 = 15
441: (05) goto pc+73
515: (79) r6 = *(u64 *)(r10 -152)
516: (bf) r7 = r10
517: (07) r7 += -112
518: (bf) r2 = r7
519: (0f) r2 += r1
520: (71) r1 = *(u8 *)(r8 +0)
521: (73) *(u8 *)(r2 +45) = r1
....
and the verifier complains "R2 invalid mem access 'inv'" for insn #521.
This is because verifier marks register r2 as unknown value after #519
where r2 is a stack pointer and r1 holds a constant value.
Teach verifier to recognize "stack_ptr + imm" and
"stack_ptr + reg with const val" as valid stack_ptr with new offset.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When reading the ring buffer for consuming, it is optimized for splice,
where a page is taken out of the ring buffer (zero copy) and sent to the
reading consumer. When the read is finished with the page, it calls
ring_buffer_free_read_page(), which simply frees the page. The next time the
reader needs to get a page from the ring buffer, it must call
ring_buffer_alloc_read_page() which allocates and initializes a reader page
for the ring buffer to be swapped into the ring buffer for a new filled page
for the reader.
The problem is that there's no reason to actually free the page when it is
passed back to the ring buffer. It can hold it off and reuse it for the next
iteration. This completely removes the interaction with the page_alloc
mechanism.
Using the trace-cmd utility to record all events (causing trace-cmd to
require reading lots of pages from the ring buffer, and calling
ring_buffer_alloc/free_read_page() several times), and also assigning a
stack trace trigger to the mm_page_alloc event, we can see how many times
the ring_buffer_alloc_read_page() needed to allocate a page for the ring
buffer.
Before this change:
# trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
# trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
9968
After this change:
# trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
# trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
4
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
reference to fix pmem crash
The x86 conversion to the generic GUP code included a small change which causes
crashes and data corruption in the pmem code - not good.
The root cause is that the /dev/pmem driver code implicitly relies on the x86
get_user_pages() implementation doing a get_page() on the page refcount, because
get_page() does a get_zone_device_page() which properly refcounts pmem's separate
page struct arrays that are not present in the regular page struct structures.
(The pmem driver does this because it can cover huge memory areas.)
But the x86 conversion to the generic GUP code changed the get_page() to
page_cache_get_speculative() which is faster but doesn't do the
get_zone_device_page() call the pmem code relies on.
One way to solve the regression would be to change the generic GUP code to use
get_page(), but that would slow things down a bit and punish other generic-GUP
using architectures for an x86-ism they did not care about. (Arguably the pmem
driver was probably not working reliably for them: but nvdimm is an Intel
feature, so non-x86 exposure is probably still limited.)
So restructure the pmem code's interface with the MM instead: get rid of the
get/put_zone_device_page() distinction, integrate put_zone_device_page() into
__put_page() and and restructure the pmem completion-wait and teardown machinery:
Kirill points out that the calls to {get,put}_dev_pagemap() can be
removed from the mm fast path if we take a single get_dev_pagemap()
reference to signify that the page is alive and use the final put of the
page to drop that reference.
This does require some care to make sure that any waits for the
percpu_ref to drop to zero occur *after* devm_memremap_page_release(),
since it now maintains its own elevated reference.
This speeds up things while also making the pmem refcounting more robust going
forward.
Suggested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/149339998297.24933.1129582806028305912.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit bfb0b80db5f9 ("cgroup: avoid attaching a cgroup root to two
different superblocks") is broken. Now we try to fix the race by
delaying the initialization of cgroup root refcnt until a superblock
has been allocated.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Tested-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
* pm-cpufreq: (37 commits)
cpufreq: Add Tegra186 cpufreq driver
cpufreq: imx6q: Fix error handling code
cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
cpufreq: schedutil: Use policy-dependent transition delays
cpufreq: schedutil: Reduce frequencies slower
cpufreq: intel_pstate: Add support for Gemini Lake
cpufreq: intel_pstate: Eliminate intel_pstate_get_min_max()
cpufreq: intel_pstate: Do not walk policy->cpus
cpufreq: intel_pstate: Introduce pid_in_use()
cpufreq: intel_pstate: Drop struct cpu_defaults
cpufreq: intel_pstate: Move cpu_defaults definitions
cpufreq: intel_pstate: Add update_util callback to pstate_funcs
cpufreq: intel_pstate: Use different utilization update callbacks
cpufreq: intel_pstate: Modify check in intel_pstate_update_status()
cpufreq: intel_pstate: Drop driver_registered variable
cpufreq: intel_pstate: Skip unnecessary PID resets on init
cpufreq: intel_pstate: Set HWP sampling interval once
cpufreq: intel_pstate: Clean up intel_pstate_busy_pid_reset()
cpufreq: intel_pstate: Fold intel_pstate_reset_all_pid() into the caller
...
|
|
|
|
Hannes rightfully spotted that the bpf_lock doesn't need to be
irqsave variant. We never perform any such updates where this
would be necessary (neither right now nor in future), therefore
relax this further.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cgroup_get() expected to be called only on live cgroups and triggers
warning on a dead cgroup; however, cgroup_sk_alloc() may be called
while cloning a socket which is left in an empty and removed cgroup
and thus may legitimately duplicate its reference on a dead cgroup.
This currently triggers the following warning spuriously.
WARNING: CPU: 14 PID: 0 at kernel/cgroup.c:490 cgroup_get+0x55/0x60
...
[<ffffffff8107e123>] __warn+0xd3/0xf0
[<ffffffff8107e20e>] warn_slowpath_null+0x1e/0x20
[<ffffffff810ff465>] cgroup_get+0x55/0x60
[<ffffffff81106061>] cgroup_sk_alloc+0x51/0xe0
[<ffffffff81761beb>] sk_clone_lock+0x2db/0x390
[<ffffffff817cce06>] inet_csk_clone_lock+0x16/0xc0
[<ffffffff817e8173>] tcp_create_openreq_child+0x23/0x4b0
[<ffffffff818601a1>] tcp_v6_syn_recv_sock+0x91/0x670
[<ffffffff817e8b16>] tcp_check_req+0x3a6/0x4e0
[<ffffffff81861ba3>] tcp_v6_rcv+0x693/0xa00
[<ffffffff81837429>] ip6_input_finish+0x59/0x3e0
[<ffffffff81837cb2>] ip6_input+0x32/0xb0
[<ffffffff81837387>] ip6_rcv_finish+0x57/0xa0
[<ffffffff81837ac8>] ipv6_rcv+0x318/0x4d0
[<ffffffff817778c7>] __netif_receive_skb_core+0x2d7/0x9a0
[<ffffffff81777fa6>] __netif_receive_skb+0x16/0x70
[<ffffffff81778023>] netif_receive_skb_internal+0x23/0x80
[<ffffffff817787d8>] napi_gro_frags+0x208/0x270
[<ffffffff8168a9ec>] mlx4_en_process_rx_cq+0x74c/0xf40
[<ffffffff8168b270>] mlx4_en_poll_rx_cq+0x30/0x90
[<ffffffff81778b30>] net_rx_action+0x210/0x350
[<ffffffff8188c426>] __do_softirq+0x106/0x2c7
[<ffffffff81082bad>] irq_exit+0x9d/0xa0 [<ffffffff8188c0e4>] do_IRQ+0x54/0xd0
[<ffffffff8188a63f>] common_interrupt+0x7f/0x7f <EOI>
[<ffffffff8173d7e7>] cpuidle_enter+0x17/0x20
[<ffffffff810bdfd9>] cpu_startup_entry+0x2a9/0x2f0
[<ffffffff8103edd1>] start_secondary+0xf1/0x100
This patch renames the existing cgroup_get() with the dead cgroup
warning to cgroup_get_live() after cgroup_kn_lock_live() and
introduces the new cgroup_get() which doesn't check whether the cgroup
is live or dead.
All existing cgroup_get() users except for cgroup_sk_alloc() are
converted to use cgroup_get_live().
Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
Cc: stable@vger.kernel.org # v4.5+
Cc: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
irq_time_read() returns the irqtime minus the ksoftirqd time. This
is necessary because irq_time_read() is used to substract the IRQ time
from the sum_exec_runtime of a task. If we were to include the softirq
time of ksoftirqd, this task would substract its own CPU time everytime
it updates ksoftirqd->sum_exec_runtime which would therefore never
progress.
But this behaviour got broken by:
a499a5a14db ("sched/cputime: Increment kcpustat directly on irqtime account")
... which now includes ksoftirqd softirq time in the time returned by
irq_time_read().
This has resulted in wrong ksoftirqd cputime reported to userspace
through /proc/stat and thus "top" not showing ksoftirqd when it should
after intense networking load.
ksoftirqd->stime happens to be correct but it gets scaled down by
sum_exec_runtime through task_cputime_adjusted().
To fix this, just account the strict IRQ time in a separate counter and
use it to report the IRQ time.
Reported-and-tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1493129448-5356-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When iterating through a map, we need to find a key that does not exist
in the map so map_get_next_key will give us the first key of the map.
This often requires a lot of guessing in production systems.
This patch makes map_get_next_key return the first key when the key
pointer in the parameter is NULL.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When parsing for the <module:name> format, we use strchr() to look for
the separator, when we know that the module name can't be longer than
MODULE_NAME_LEN. Enforce the same using strnchr().
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jessica Yu <jeyu@redhat.com>
|
|
Now that also the last in-tree user of the xdp_adjust_head bit has
been removed, we can remove the flag from struct bpf_prog altogether.
This, at the same time, also makes sure that any future driver for
XDP comes with bpf_xdp_adjust_head() support right away.
A rejection based on this flag would also mean that tail calls
couldn't be used with such driver as per c2002f983767 ("bpf: fix
checking xdp_adjust_head on tail calls") fix, thus lets not allow
for it in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"The (hopefully) final fix for the irq affinity spreading logic"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Fix calculating vectors to assign
|
|
There are no users outside of signal.c so make the function static so
the compiler and other developers have that information.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Both conflict were simple overlapping changes.
In the kaweth case, Eric Dumazet's skb_cow() bug fix overlapped the
conversion of the driver in net-next to use in-netdev stats.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Modify do_prlimit to call security_task_setrlimit passing the task
whose rlimit we are changing not the tsk->group_leader.
In general this should not matter as the lsms implementing
security_task_setrlimit apparmor and selinux both examine the
task->cred to see what should be allowed on the destination task.
That task->cred is shared between tasks created with CLONE_THREAD
unless thread keyrings are in play, in which case both apparmor and
selinux create duplicate security contexts.
So the only time when it will matter which thread is passed to
security_task_setrlimit is if one of the threads of a process performs
an operation that changes only it's credentials. At which point if a
thread has done that we don't want to hide that information from the
lsms.
So fix the call of security_task_setrlimit. With the removal
of tsk->group_leader this makes the code slightly faster,
more comprehensible and maintainable.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
We are not supposed to add new entries to this thing
any more.
Thanks to Eric Dumazet for noticing this.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Constants used for tuning are generally a bad idea, especially as hardware
changes over time. Replace the constant 2 jiffies with sysctl variable
netdev_budget_usecs to enable sysadmins to tune the softirq processing.
Also document the variable.
For example, a very fast machine might tune this to 1000 microseconds,
while my regression testing 486DX-25 needs it to be 4000 microseconds on
a nearly idle network to prevent time_squeeze from being incremented.
Version 2: changed jiffies to microseconds for predictable units.
Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Per Dan's static checker warning, the code that returns NULL was removed
in 2010, so this patch updates the comments and fixes the code
assumptions.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Have the stacktrace function trigger probe trigger stack traces within the
instance that they were added to in the set_ftrace_filter.
># cd /sys/kernel/debug/tracing
># mkdir instances/foo
># cd instances/foo
># echo schedule:stacktrace:1 > set_ftrace_filter
># cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [001] .N.2 202.585010: <stack trace>
=>
=> schedule
=> schedule_preempt_disabled
=> do_idle
=> cpu_startup_entry
=> start_secondary
=> verify_cpu
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Have the traceon/off function probe triggers affect only the instance they
are set in. This required making the trace_on/off accessible for other files
in the tracing directory.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Modify the snapshot probe trigger to work with instances. This way the
snapshot function trigger will only affect the instance that it is added to
in the set_ftrace_filter file.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pass around the local trace_array that is the descriptor for tracing
instances, when enabling and disabling probes. This by default sets the
enable/disable of event probe triggers to work with instances.
The other probes will need some more work to get them working with
instances.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
With the redesign of the registration and execution of the function probes
(triggers), data can now be passed from the setup of the probe to the probe
callers that are specific to the trace_array it is on. Although, all probes
still only affect the toplevel trace array, this change will allow for
instances to have their own probes separated from other instances and the
top array.
That is, something like the stacktrace probe can be set to trace only in an
instance and not the toplevel trace array. This isn't implement yet, but
this change sets the ground work for the change.
When a probe callback is triggered (someone writes the probe format into
set_ftrace_filter), it calls register_ftrace_function_probe() passing in
init_data that will be used to initialize the probe. Then for every matching
function, register_ftrace_function_probe() will call the probe_ops->init()
function with the init data that was passed to it, as well as an address to
a place holder that is associated with the probe and the instance. The first
occurrence will have a NULL in the pointer. The init() function will then
initialize it. If other probes are added, or more functions are part of the
probe, the place holder will be passed to the init() function with the place
holder data that it was initialized to the last time.
Then this place_holder is passed to each of the other probe_ops functions,
where it can be used in the function callback. When the probe_ops free()
function is called, it can be called either with the rip of the function
that is being removed from the probe, or zero, indicating that there are no
more functions attached to the probe, and the place holder is about to be
freed. This gives the probe_ops a way to free the data it assigned to the
place holder if it was allocade during the first init call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.
This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the ftrace_hash_move_and_update_ops() fails, and an ops->free() function
exists, then it needs to be called on all the ops that were added by this
registration.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Now that the function probes have their own ftrace_ops, there's no reason to
continue using the ftrace_func_hash to find which probe to call in the
function callback. The ops that is passed in to the function callback is
part of the probe_ops to call.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Have the function probes have their own ftrace_ops, and remove the
trace_probe_ops. This simplifies some of the ftrace infrastructure code.
Individual entries for each function is still allocated for the use of the
output for set_ftrace_filter, but they will be removed soon too.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.
Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The processes of updating a ops filter_hash is a bit complex, and requires
setting up an old hash to perform the update. This is done exactly the same
in two locations for the same reasons. Create a helper function that does it
in one place.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
No users of the function probes uses the data field anymore. Remove it, and
change the init function to take a void *data parameter instead of a
void **data, because the init will just get the data that the registering
function was received, and there's no state after it is called.
The other functions for ftrace_probe_ops still take the data parameter, but
it will currently only be passed NULL. It will stay as a parameter for
future data to be passed to these functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
None of the probe users uses the data field anymore of the entry. They all
have their own print() function. Remove showing the data field in the
generic function as the data field will be going away.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
There are no users of unregister_ftrace_function_probe_all(). The only probe
function that is used is unregister_ftrace_function_probe_func(). Rename the
internal static function __unregister_ftrace_function_probe() to
unregister_ftrace_function_probe_func() and make it global.
Also remove the PROBE_TEST_FUNC as it would be always set.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Nothing calls unregister_ftrace_function_probe(). Remove it as well as the
flag PROBE_TEST_DATA, as this function was the only one to set it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the rest of the function
trigger counters over to the new ftrace_func_mapper helper functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the snapshot
trigger counter over to the new ftrace_func_mapper helper functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In order to move the ops to the function probes directly, they need a way to
map function ips to their own data without depending on the infrastructure
of the function probes, as the data field will be going away.
New helper functions are added that are based on the ftrace_hash code.
ftrace_func_mapper functions are there to let the probes map ips to their
data. These can be allocated by the probe ops, and referenced in the
function callbacks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In preparation to cleaning up the probe function registration code, the
"data" parameter will eventually be removed from the probe->func() call.
Instead it will receive its own "ops" function, in which it can set up its
own data that it needs to map.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Nothing uses "flags" in the ftrace_func_probe descriptor. Remove it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As nothing outside the tracing directory uses the function command mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the command functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull two more ftrace fixes from Steven Rostedt:
"While continuing my development, I uncovered two more small bugs.
One is a race condition when enabling the snapshot function probe
trigger. It enables the probe before allocating the snapshot, and if
the probe triggers first, it stops tracing with a warning that the
snapshot buffer was not allocated.
The seconds is that the snapshot file should show how to use it when
it is empty. But a bug fix from long ago broke the "is empty" test and
the snapshot file no longer displays the help message"
* tag 'trace-v4.11-rc5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Have ring_buffer_iter_empty() return true when empty
tracing: Allocate the snapshot buffer before enabling probe
|
