summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2017-12-05remove task and stack pointer printout from oops dumpLinus Torvalds
Geert Uytterhoeven reported a NFS oops, and pointed out that some of the numbers were hashed and useless. We could just turn them from '%p' into '%px', but those numbers are really just legacy, and useless even when not hashed. So just remove them entirely. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various TCP control block fixes, including one that crashes with SELinux, from David Ahern and Eric Dumazet. 2) Fix ACK generation in rxrpc, from David Howells. 3) ipvlan doesn't set the mark properly in the ipv4 route lookup key, from Gao Feng. 4) SIT configuration doesn't take on the frag_off ipv4 field configuration properly, fix from Hangbin Liu. 5) TSO can fail after device down/up on stmmac, fix from Lars Persson. 6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet. 7) Various SKB leak fixes in vhost/tun/tap (mostly observed as performance problems). From Wei Xu. 8) mvpps's TX descriptors were not zero initialized, from Yan Markman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() rxrpc: Fix the MAINTAINERS record rxrpc: Use correct netns source in rxrpc_release_sock() liquidio: fix incorrect indentation of assignment statement stmmac: reset last TSO segment size after device open ipvlan: Add the skb->mark as flow4's member to lookup route s390/qeth: build max size GSO skbs on L2 devices s390/qeth: fix GSO throughput regression s390/qeth: fix thinko in IPv4 multicast address tracking tap: free skb if flags error tun: free skb in early errors vhost: fix skb leak in handle_rx() bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg() bnxt_en: fix dst/src fid for vxlan encap/decap actions bnxt_en: wildcard smac while creating tunnel decap filter bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown phylink: ensure we take the link down when phylink_stop() is called sfp: warn about modules requiring address change sequence sfp: improve RX_LOS handling ...
2017-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a compilation warning in xdp redirect tracepoint due to missing bpf.h include that pulls in struct bpf_map, from Xie. 2) Limit the maximum number of attachable BPF progs for a given perf event as long as uabi is not frozen yet. The hard upper limit is now 64 and therefore the same as with BPF multi-prog for cgroups. Also add related error checking for the sample BPF loader when enabling and attaching to the perf event, from Yonghong. 3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log case, so that the test case can always pass and not fail in some environments due to too low default limit, also from Yonghong. 4) Fix up a missing license header comment for kernel/bpf/offload.c, from Jakub. 5) Several fixes for bpftool, among others a crash on incorrect arguments when json output is used, error message handling fixes on unknown options and proper destruction of json writer for some exit cases, all from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-12-01bpf: set maximum number of attached progs to 64 for a single perf tpYonghong Song
cgropu+bpf prog array has a maximum number of 64 programs. Let us apply the same limit here. Fixes: e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-29kallsyms: take advantage of the new '%px' formatLinus Torvalds
The conditional kallsym hex printing used a special fixed-width '%lx' output (KALLSYM_FMT) in preparation for the hashing of %p, but that series ended up adding a %px specifier to help with the conversions. Use it, and avoid the "print pointer as an unsigned long" code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27bpf: offload: add a license headerJakub Kicinski
I forgot to add a license on kernel/bpf/offload.c. Luckily I'm still the only author so make it explicitly GPLv2. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-27blktrace: fix trace mutex deadlockJens Axboe
A previous commit changed the locking around registration/cleanup, but direct callers of blk_trace_remove() were missed. This means that if we hit the error path in setup, we will deadlock on attempting to re-acquire the queue trace mutex. Fixes: 1f2cac107c59 ("blktrace: fix unlocked access to init/start-stop/teardown") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-26Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
2017-11-26Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: two PMU driver fixes and a memory leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix memory leak triggered by perf --namespace perf/x86/intel/uncore: Add event constraint for BDX PCU perf/x86/intel: Hide TSX events when RTM is not supported
2017-11-26Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static key fix from Ingo Molnar: "Fix a boot warning related to bad init ordering of the static keys self-test" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Invoke jump_label_test() via early_initcall()
2017-11-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-23genirq/matrix: Make - vs ?: Precedence explicitKees Cook
Noticed with a Clang build. This improves the readability of the ?: expression, as it has lower precedence than the - expression. Show explicitly that - is evaluated first. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171122205645.GA27125@beast
2017-11-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2017-11-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Several BPF offloading fixes, from Jakub. Among others: - Limit offload to cls_bpf and XDP program types only. - Move device validation into the driver and don't make any assumptions about the device in the classifier due to shared blocks semantics. - Don't pass offloaded XDP program into the driver when it should be run in native XDP instead. Offloaded ones are not JITed for the host in such cases. - Don't destroy device offload state when moved to another namespace. - Revert dumping offload info into user space for now, since ifindex alone is not sufficient. This will be redone properly for bpf-next tree. 2) Fix test_verifier to avoid using bpf_probe_write_user() helper in test cases, since it's dumping a warning into kernel log which may confuse users when only running tests. Switch to use bpf_trace_printk() instead, from Yonghong. 3) Several fixes for correcting ARG_CONST_SIZE_OR_ZERO semantics before it becomes uabi, from Gianluca. More specifically: - Add a type ARG_PTR_TO_MEM_OR_NULL that is used only by bpf_csum_diff(), where the argument is either a valid pointer or NULL. The subsequent ARG_CONST_SIZE_OR_ZERO then enforces a valid pointer in case of non-0 size or a valid pointer or NULL in case of size 0. Given that, the semantics for ARG_PTR_TO_MEM in combination with ARG_CONST_SIZE_OR_ZERO are now such that in case of size 0, the pointer must always be valid and cannot be NULL. This fix in semantics allows for bpf_probe_read() to drop the recently added size == 0 check in the helper that would become part of uabi otherwise once released. At the same time we can then fix bpf_probe_read_str() and bpf_perf_event_output() to use ARG_CONST_SIZE_OR_ZERO instead of ARG_CONST_SIZE in order to fix recently reported issues by Arnaldo et al, where LLVM optimizes two boundary checks into a single one for unknown variables where the verifier looses track of the variable bounds and thus rejects valid programs otherwise. 4) A fix for the verifier for the case when it detects comparison of two constants where the branch is guaranteed to not be taken at runtime. Verifier will rightfully prune the exploration of such paths, but we still pass the program to JITs, where they would complain about using reserved fields, etc. Track such dead instructions and sanitize them with mov r0,r0. Rejection is not possible since LLVM may generate them for valid C code and doesn't do as much data flow analysis as verifier. For bpf-next we might implement removal of such dead code and adjust branches instead. Fix from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-23Merge tag 'for-linus-timers-conversion-final-v4.15-rc1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent Pull the last batch of manual timer conversions from Kees Cook: - final batch of "non trivial" timer conversions (multi-tree dependencies, things Coccinelle couldn't handle, etc). - treewide conversions via Coccinelle, in 4 steps: - DEFINE_TIMER() functions converted to struct timer_list * argument - init_timer() -> setup_timer() - setup_timer() -> timer_setup() - setup_timer() -> timer_setup() (with a single embedded structure) - deprecated timer API removals (init_timer(), setup_*timer()) - finalization of new API (remove global casts)
2017-11-23bpf: fix branch pruning logicAlexei Starovoitov
when the verifier detects that register contains a runtime constant and it's compared with another constant it will prune exploration of the branch that is guaranteed not to be taken at runtime. This is all correct, but malicious program may be constructed in such a way that it always has a constant comparison and the other branch is never taken under any conditions. In this case such path through the program will not be explored by the verifier. It won't be taken at run-time either, but since all instructions are JITed the malicious program may cause JITs to complain about using reserved fields, etc. To fix the issue we have to track the instructions explored by the verifier and sanitize instructions that are dead at run time with NOPs. We cannot reject such dead code, since llvm generates it for valid C code, since it doesn't do as much data flow analysis as the verifier does. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZEROGianluca Borello
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way the compiler generates optimized BPF code when checking boundaries of an argument from C code. A typical example of this optimized code can be generated using the bpf_perf_event_output helper when operating on variable memory: /* len is a generic scalar */ if (len > 0 && len <= 0x7fff) bpf_perf_event_output(ctx, &perf_map, 0, buf, len); 110: (79) r5 = *(u64 *)(r10 -40) 111: (bf) r1 = r5 112: (07) r1 += -1 113: (25) if r1 > 0x7ffe goto pc+6 114: (bf) r1 = r6 115: (18) r2 = 0xffff94e5f166c200 117: (b7) r3 = 0 118: (bf) r4 = r7 119: (85) call bpf_perf_event_output#25 R5 min value is negative, either use unsigned or 'var &= const' With this code, the verifier loses track of the variable. Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it avoids this quite common case which leads to usability issues, and the compiler generates code that the verifier can more easily test: if (len <= 0x7fff) bpf_perf_event_output(ctx, &perf_map, 0, buf, len); or bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff); No changes to the bpf_perf_event_output helper are necessary since it can handle a case where size is 0, and an empty frame is pushed. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZEROGianluca Borello
Commit 9fd29c08e520 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way the compiler generates optimized BPF code when checking boundaries of an argument from C code. A typical example of this optimized code can be generated using the bpf_probe_read_str helper when operating on variable memory: /* len is a generic scalar */ if (len > 0 && len <= 0x7fff) bpf_probe_read_str(p, len, s); 251: (79) r1 = *(u64 *)(r10 -88) 252: (07) r1 += -1 253: (25) if r1 > 0x7ffe goto pc-42 254: (bf) r1 = r7 255: (79) r2 = *(u64 *)(r10 -88) 256: (bf) r8 = r4 257: (85) call bpf_probe_read_str#45 R2 min value is negative, either use unsigned or 'var &= const' With this code, the verifier loses track of the variable. Replacing arg2 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it avoids this quite common case which leads to usability issues, and the compiler generates code that the verifier can more easily test: if (len <= 0x7fff) bpf_probe_read_str(p, len, s); or bpf_probe_read_str(p, len & 0x7fff, s); No changes to the bpf_probe_read_str helper are necessary since strncpy_from_unsafe itself immediately returns if the size passed is 0. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: remove explicit handling of 0 for arg2 in bpf_probe_readGianluca Borello
Commit 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO") changed arg2 type to ARG_CONST_SIZE_OR_ZERO to simplify writing bpf programs by taking advantage of the new semantics introduced for ARG_CONST_SIZE_OR_ZERO which allows <!NULL, 0> arguments. In order to prevent the helper from actually passing a NULL pointer to probe_kernel_read, which can happen when <NULL, 0> is passed to the helper, the commit also introduced an explicit check against size == 0. After the recent introduction of the ARG_PTR_TO_MEM_OR_NULL type, bpf_probe_read can not receive a pair of <NULL, 0> arguments anymore, thus the check is not needed anymore and can be removed, since probe_kernel_read can correctly handle a <!NULL, 0> call. This also fixes the semantics of the helper before it gets officially released and bpf programs start relying on this check. Fixes: 9c019e2bc4b2 ("bpf: change helper bpf_probe_read arg2 type to ARG_CONST_SIZE_OR_ZERO") Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-22bpf: introduce ARG_PTR_TO_MEM_OR_NULLGianluca Borello
With the current ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM semantics, an helper argument can be NULL when the next argument type is ARG_CONST_SIZE_OR_ZERO and the verifier can prove the value of this next argument is 0. However, most helpers are just interested in handling <!NULL, 0>, so forcing them to deal with <NULL, 0> makes the implementation of those helpers more complicated for no apparent benefits, requiring them to explicitly handle those corner cases with checks that bpf programs could start relying upon, preventing the possibility of removing them later. Solve this by making ARG_PTR_TO_MEM/ARG_PTR_TO_UNINIT_MEM never accept NULL even when ARG_CONST_SIZE_OR_ZERO is set, and introduce a new argument type ARG_PTR_TO_MEM_OR_NULL to explicitly deal with the NULL case. Currently, the only helper that needs this is bpf_csum_diff_proto(), so change arg1 and arg3 to this new type as well. Also add a new battery of tests that explicitly test the !ARG_PTR_TO_MEM_OR_NULL combination: all the current ones testing the various <NULL, 0> variations are focused on bpf_csum_diff, so cover also other helpers. Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21timer: Pass function down to initialization routinesKees Cook
In preparation for removing more macros, pass the function down to the initialization routines instead of doing it in macros. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21timer: Switch callback prototype to take struct timer_list * argumentKees Cook
Since all callbacks have been converted, we can switch the core prototype to "struct timer_list *" now too. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21timer: Pass timer_list pointer to callbacks unconditionallyKees Cook
Now that all timer callbacks are already taking their struct timer_list pointer as the callback argument, just do this unconditionally and remove the .data field. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: init_timer() -> setup_timer()Kees Cook
This mechanically converts all remaining cases of ancient open-coded timer setup with the old setup_timer() API, which is the first step in timer conversions. This has no behavioral changes, since it ultimately just changes the order of assignment to fields of struct timer_list when finding variations of: init_timer(&t); f.function = timer_callback; t.data = timer_callback_arg; to be converted into: setup_timer(&t, timer_callback, timer_callback_arg); The conversion is done with the following Coccinelle script, which is an improved version of scripts/cocci/api/setup_timer.cocci, in the following ways: - assignments-before-init_timer() cases - limit the .data case removal to the specific struct timer_list instance - handling calls by dereference (timer->field vs timer.field) spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/setup_timer.cocci @fix_address_of@ expression e; @@ init_timer( -&(e) +&e , ...) // Match the common cases first to avoid Coccinelle parsing loops with // "... when" clauses. @match_immediate_function_data_after_init_timer@ expression e, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) @match_immediate_function_data_before_init_timer@ expression e, func, da; @@ ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @match_function_and_data_after_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ... when != func = e2 when != da = e3 ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) @match_function_and_data_before_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) ... when != func = e2 when != da = e3 -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @r1 exists@ expression t; identifier f; position p; @@ f(...) { ... when any init_timer@p(\(&t\|t\)) ... when any } @r2 exists@ expression r1.t; identifier g != r1.f; expression e8; @@ g(...) { ... when any \(t.data\|t->data\) = e8 ... when any } // It is dangerous to use setup_timer if data field is initialized // in another function. @script:python depends on r2@ p << r1.p; @@ cocci.include_match(False) @r3@ expression r1.t, func, e7; position r1.p; @@ ( -init_timer@p(&t); +setup_timer(&t, func, 0UL); ... when != func = e7 -t.function = func; | -t.function = func; ... when != func = e7 -init_timer@p(&t); +setup_timer(&t, func, 0UL); | -init_timer@p(t); +setup_timer(t, func, 0UL); ... when != func = e7 -t->function = func; | -t->function = func; ... when != func = e7 -init_timer@p(t); +setup_timer(t, func, 0UL); ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook
This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - print the warning about dropped messages on consoles on a separate line. It makes it more legible. - one typo fix and small code clean up. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: added new line symbol after warning about dropped messages printk: fix typo in printk_safe.c printk: simplify no_printk()
2017-11-21bpf: revert report offload info to user spaceJakub Kicinski
This reverts commit bd601b6ada11 ("bpf: report offload info to user space"). The ifindex by itself is not sufficient, we should provide information on which network namespace this ifindex belongs to. After considering some options we concluded that it's best to just remove this API for now, and rework it in -next. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: offload: ignore namespace movesJakub Kicinski
We are currently destroying the device offload state when device moves to another net namespace. This doesn't break with current NFP code, because offload state is not used on program removal, but it's not correct behaviour. Ignore the device unregister notifications on namespace move. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: turn bpf_prog_get_type() into a wrapperJakub Kicinski
bpf_prog_get_type() is identical to bpf_prog_get_type_dev(), with false passed as attach_drv. Instead of keeping it as an exported symbol turn it into static inline wrapper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: offload: move offload device validation out to the driversJakub Kicinski
With TC shared block changes we can't depend on correct netdev pointer being available in cls_bpf. Move the device validation to the driver. Core will only make sure that offloaded programs are always attached in the driver (or in HW by the driver). We trust that drivers which implement offload callbacks will perform necessary checks. Moving the checks to the driver is generally a useful thing, in practice the check should be against a switchdev instance, not a netdev, given that most ASICs will probably allow using the same program on many ports. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: offload: rename the ifindex fieldJakub Kicinski
bpf_target_prog seems long and clunky, rename it to prog_ifindex. We don't want to call this field just ifindex, because maps may need a similar field in the future and bpf_attr members for programs and maps are unnamed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: offload: limit offload to cls_bpf and xdp programs onlyJakub Kicinski
We are currently only allowing attachment of device-bound cls_bpf and XDP programs. Make this restriction explicit in the BPF offload code. This way we can potentially reuse the ifindex field in the future. Since XDP and cls_bpf programs can only be loaded by admin, we can drop the explicit capability check from offload code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-21bpf: offload: add comment warning developers about double destroyJakub Kicinski
Offload state may get destroyed either because the device for which it was constructed is going away, or because the refcount of bpf program itself has reached 0. In both of those cases we will call __bpf_prog_offload_destroy() to unlink the offload from the device. We may in fact call it twice, which works just fine, but we should make clear this is intended and caution others trying to extend the function. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-19blktrace: Use blk_trace_bio_get_cgid inside blk_add_trace_bioMarcos Paulo de Souza
We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio(). Since both are readily available in the function already, kill the argument. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Rewrote commit message. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...
2017-11-17kernel/reboot.c: add devm_register_reboot_notifier()Andrey Smirnov
Add devm_* wrapper around register_reboot_notifier to simplify device specific reboot notifier registration/unregistration. [akpm@linux-foundation.org: move `struct device' forward decl to top-of-file] Link: http://lkml.kernel.org/r/20170320171753.1705-1-andrew.smirnov@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kcov: support comparison operands collectionVictor Chibotaru
Enables kcov to collect comparison operands from instrumented code. This is done by using Clang's -fsanitize=trace-cmp instrumentation (currently not available for GCC). The comparison operands help a lot in fuzz testing. E.g. they are used in Syzkaller to cover the interiors of conditional statements with way less attempts and thus make previously unreachable code reachable. To allow separate collection of coverage and comparison operands two different work modes are implemented. Mode selection is now done via a KCOV_ENABLE ioctl call with corresponding argument value. Link: http://lkml.kernel.org/r/20171011095459.70721-1-glider@google.com Signed-off-by: Victor Chibotaru <tchibo@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: <syzkaller@googlegroups.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kcov: remove pointless current != NULL checkAndrey Ryabinin
__sanitizer_cov_trace_pc() is a hot code, so it's worth to remove pointless '!current' check. Current is never NULL. Link: http://lkml.kernel.org/r/20170929162221.32500-1-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/panic.c: add TAINT_AUXBorislav Petkov
This is the gist of a patch which we've been forward-porting in our kernels for a long time now and it probably would make a good sense to have such TAINT_AUX flag upstream which can be used by each distro etc, how they see fit. This way, we won't need to forward-port a distro-only version indefinitely. Add an auxiliary taint flag to be used by distros and others. This obviates the need to forward-port whatever internal solutions people have in favor of a single flag which they can map arbitrarily to a definition of their pleasing. The "X" mnemonic could also mean eXternal, which would be taint from a distro or something else but not the upstream kernel. We will use it to mark modules for which we don't provide support. I.e., a really eXternal module. Link: http://lkml.kernel.org/r/20170911134533.dp5mtyku5bongx4c@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Petr Mladek <pmladek@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pid: remove pidhashGargi Sharma
pidhash is no longer required as all the information can be looked up from idr tree. nr_hashed represented the number of pids that had been hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant, it has been renamed to pid_allocated and PIDNS_ADDING respectively. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.com Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> [ia64] Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pid: replace pid bitmap implementation with IDR APIGargi Sharma
Patch series "Replacing PID bitmap implementation with IDR API", v4. This series replaces kernel bitmap implementation of PID allocation with IDR API. These patches are written to simplify the kernel by replacing custom code with calls to generic code. The following are the stats for pid and pid_namespace object files before and after the replacement. There is a noteworthy change between the IDR and bitmap implementation. Before text data bss dec hex filename 8447 3894 64 12405 3075 kernel/pid.o After text data bss dec hex filename 3397 304 0 3701 e75 kernel/pid.o Before text data bss dec hex filename 5692 1842 192 7726 1e2e kernel/pid_namespace.o After text data bss dec hex filename 2854 216 16 3086 c0e kernel/pid_namespace.o The following are the stats for ps, pstree and calling readdir on /proc for 10,000 processes. ps: With IDR API With bitmap real 0m1.479s 0m2.319s user 0m0.070s 0m0.060s sys 0m0.289s 0m0.516s pstree: With IDR API With bitmap real 0m1.024s 0m1.794s user 0m0.348s 0m0.612s sys 0m0.184s 0m0.264s proc: With IDR API With bitmap real 0m0.059s 0m0.074s user 0m0.000s 0m0.004s sys 0m0.016s 0m0.016s This patch (of 2): Replace the current bitmap implementation for Process ID allocation. Functions that are no longer required, for example, free_pidmap(), alloc_pidmap(), etc. are removed. The rest of the functions are modified to use the IDR API. The change was made to make the PID allocation less complex by replacing custom code with calls to generic API. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com [avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl] Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.com Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/sysctl.c: code cleanupsOla N. Kaldestad
Remove unnecessary else block, remove redundant return and call to kfree in if block. Link: http://lkml.kernel.org/r/1510238435-1655-1-git-send-email-mail@okal.no Signed-off-by: Ola N. Kaldestad <mail@okal.no> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kdump: print a message in case parse_crashkernel_mem resulted in zero bytesDave Young
parse_crashkernel_mem() silently returns if we get zero bytes in the parsing function. It is useful for debugging to add a message, especially if the kernel cannot boot correctly. Add a pr_info instead of pr_warn because it is expected behavior for size = 0, eg. crashkernel=2G-4G:128M, size will be 0 in case system memory is less than 2G. Link: http://lkml.kernel.org/r/20171114080129.GA6115@dhcp-128-65.nay.redhat.com Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in ↵Oleg Nesterov
complete_signal() complete_signal() checks SIGNAL_UNKILLABLE before it starts to destroy the thread group, today this is wrong in many ways. If nothing else, fatal_signal_pending() should always imply that the whole thread group (except ->group_exit_task if it is not NULL) is killed, this check breaks the rule. After the previous changes we can rely on sig_task_ignored(); sig_fatal(sig) && SIGNAL_UNKILLABLE can only be true if we actually want to kill this task and sig == SIGKILL OR it is traced and debugger can intercept the signal. This should hopefully fix the problem reported by Dmitry. This test-case static int init(void *arg) { for (;;) pause(); } int main(void) { char stack[16 * 1024]; for (;;) { int pid = clone(init, stack + sizeof(stack)/2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid > 0); assert(ptrace(PTRACE_ATTACH, pid, 0, 0) == 0); assert(waitpid(-1, NULL, WSTOPPED) == pid); assert(ptrace(PTRACE_DETACH, pid, 0, SIGSTOP) == 0); assert(syscall(__NR_tkill, pid, SIGKILL) == 0); assert(pid == wait(NULL)); } } triggers the WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)) in task_participate_group_stop(). do_signal_stop()->signal_group_exit() checks SIGNAL_GROUP_EXIT and return false, but task_set_jobctl_pending() checks fatal_signal_pending() and does not set JOBCTL_STOP_PENDING. And his should fix the minor security problem reported by Kyle, SECCOMP_RET_TRACE can miss fatal_signal_pending() the same way if the task is the root of a pid namespace. Link: http://lkml.kernel.org/r/20171103184246.GD21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Kyle Huey <me@kylehuey.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() ↵Oleg Nesterov
signals Change sig_task_ignored() to drop the SIG_DFL && !sig_kernel_only() signals even if force == T. This simplifies the next change and this matches the same check in get_signal() which will drop these signals anyway. Link: http://lkml.kernel.org/r/20171103184227.GC21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILLOleg Nesterov
The comment in sig_ignored() says "Tracers may want to know about even ignored signals" but SIGKILL can not be reported to debugger and it is just wrong to return 0 in this case: SIGKILL should only kill the SIGNAL_UNKILLABLE task if it comes from the parent ns. Change sig_ignored() to ignore ->ptrace if sig == SIGKILL and rely on sig_task_ignored(). SISGTOP coming from within the namespace is not really right too but at least debugger can intercept it, and we can't drop it here because this will break "gdb -p 1": ptrace_attach() won't work. Perhaps we will add another ->ptrace check later, we will see. Link: http://lkml.kernel.org/r/20171103184206.GB21036@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17sysctl: check for UINT_MAX before unsigned int min/maxJoe Lawrence
Mikulas noticed in the existing do_proc_douintvec_minmax_conv() and do_proc_dopipe_max_size_conv() introduced in this patchset, that they inconsistently handle overflow and min/max range inputs: For example: 0 ... param->min - 1 ---> ERANGE param->min ... param->max ---> the value is accepted param->max + 1 ... 0x100000000L + param->min - 1 ---> ERANGE 0x100000000L + param->min ... 0x100000000L + param->max ---> EINVAL 0x100000000L + param->max + 1, 0x200000000L + param->min - 1 ---> ERANGE 0x200000000L + param->min ... 0x200000000L + param->max ---> EINVAL 0x200000000L + param->max + 1, 0x300000000L + param->min - 1 ---> ERANGE In do_proc_do*() routines which store values into unsigned int variables (4 bytes wide for 64-bit builds), first validate that the input unsigned long value (8 bytes wide for 64-bit builds) will fit inside the smaller unsigned int variable. Then check that the unsigned int value falls inside the specified parameter min, max range. Otherwise the unsigned long -> unsigned int conversion drops leading bits from the input value, leading to the inconsistent pattern Mikulas documented above. Link: http://lkml.kernel.org/r/1507658689-11669-5-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17pipe: add proc_dopipe_max_size() to safely assign pipe_max_sizeJoe Lawrence
pipe_max_size is assigned directly via procfs sysctl: static struct ctl_table fs_table[] = { ... { .procname = "pipe-max-size", .data = &pipe_max_size, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &pipe_proc_fn, .extra1 = &pipe_min_size, }, ... int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf, size_t *lenp, loff_t *ppos) { ... ret = proc_dointvec_minmax(table, write, buf, lenp, ppos) ... and then later rounded in-place a few statements later: ... pipe_max_size = round_pipe_size(pipe_max_size); ... This leaves a window of time between initial assignment and rounding that may be visible to other threads. (For example, one thread sets a non-rounded value to pipe_max_size while another reads its value.) Similar reads of pipe_max_size are potentially racy: pipe.c :: alloc_pipe_info() pipe.c :: pipe_set_size() Add a new proc_dopipe_max_size() that consolidates reading the new value from the user buffer, verifying bounds, and calling round_pipe_size() with a single assignment to pipe_max_size. Link: http://lkml.kernel.org/r/1507658689-11669-4-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>