summaryrefslogtreecommitdiff
path: root/kernel/trace
AgeCommit message (Collapse)Author
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen. 2) The default crypto algorithm selection in Kconfig for IPSEC is out of touch with modern reality, fix this up. From Eric Biggers. 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii Nakryiko. 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from Hangbin Liu. 5) Adjust packet alignment handling in ax88179_178a driver to match what the hardware actually does. From Jeremy Kerr. 6) register_netdevice can leak in the case one of the notifiers fail, from Yang Yingliang. 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo. 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir Oltean. 9) tg3 driver can sleep forever when we get enough EEH errors, fix from David Christensen. 10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet drivers, from Ciara Loftus. 11) Fix scanning loop break condition in of_mdiobus_register(), from Florian Fainelli. 12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon. 13) Endianness fix in mlxsw, from Ido Schimmel. 14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen. 15) Missing bridge mrp configuration validation, from Horatiu Vultur. 16) Fix circular netns references in wireguard, from Jason A. Donenfeld. 17) PTP initialization on recovery is not done properly in qed driver, from Alexander Lobakin. 18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong, from Rahul Lakkireddy. 19) Don't clear bound device TX queue of socket prematurely otherwise we get problems with ktls hw offloading, from Tariq Toukan. 20) ipset can do atomics on unaligned memory, fix from Russell King. 21) Align ethernet addresses properly in bridging code, from Thomas Martitz. 22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set, from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits) rds: transport module should be auto loaded when transport is set sch_cake: fix a few style nits sch_cake: don't call diffserv parsing code when it is not needed sch_cake: don't try to reallocate or unshare skb unconditionally ethtool: fix error handling in linkstate_prepare_data() wil6210: account for napi_gro_receive never returning GRO_DROP hns: do not cast return value of napi_gro_receive to null socionext: account for napi_gro_receive never returning GRO_DROP wireguard: receive: account for napi_gro_receive never returning GRO_DROP vxlan: fix last fdb index during dump of fdb with nhid sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket tc-testing: avoid action cookies with odd length. bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT net: dsa: sja1105: fix tc-gate schedule with single element net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules net: dsa: sja1105: unconditionally free old gating config net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top net: macb: free resources on failure path of at91ether_open() net: macb: call pm_runtime_put_sync on failure path ...
2020-06-23tracing/boottime: Fix kprobe multiple eventsSascha Ortmann
Fix boottime kprobe events to report and abort after each failure when adding probes. As an example, when we try to set multiprobe kprobe events in bootconfig like this: ftrace.event.kprobes.vfsevents { probes = "vfs_read $arg1 $arg2,, !error! not reported;?", // leads to error "vfs_write $arg1 $arg2" } This will not work as expected. After commit da0f1f4167e3af69e ("tracing/boottime: Fix kprobe event API usage"), the function trace_boot_add_kprobe_event will not produce any error message when adding a probe fails at kprobe_event_gen_cmd_start. Furthermore, we continue to add probes when kprobe_event_gen_cmd_end fails (and kprobe_event_gen_cmd_start did not fail). In this case the function even returns successfully when the last call to kprobe_event_gen_cmd_end is successful. The behaviour of reporting and aborting after failures is not consistent. The function trace_boot_add_kprobe_event now reports each failure and stops adding probes immediately. Link: https://lkml.kernel.org/r/20200618163301.25854-1-sascha.ortmann@stud.uni-hannover.de Cc: stable@vger.kernel.org Cc: linux-kernel@i4.cs.fau.de Co-developed-by: Maximilian Werner <maximilian.werner96@gmail.com> Fixes: da0f1f4167e3 ("tracing/boottime: Fix kprobe event API usage") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Maximilian Werner <maximilian.werner96@gmail.com> Signed-off-by: Sascha Ortmann <sascha.ortmann@stud.uni-hannover.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-23tracing: Fix event trigger to accept redundant spacesMasami Hiramatsu
Fix the event trigger to accept redundant spaces in the trigger input. For example, these return -EINVAL echo " traceon" > events/ftrace/print/trigger echo "traceon if common_pid == 0" > events/ftrace/print/trigger echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger But these are hard to find what is wrong. To fix this issue, use skip_spaces() to remove spaces in front of actual tokens, and set NULL if there is no token. Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: stable@vger.kernel.org Fixes: 85f2b08268c0 ("tracing: Add basic event trigger framework") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-23tracing/boot: Fix config dependency for synthedic eventMasami Hiramatsu
Since commit 726721a51838 ("tracing: Move synthetic events to a separate file") decoupled synthetic event from histogram, boot-time tracing also has to check CONFIG_SYNTH_EVENT instead of CONFIG_HIST_TRIGGERS. Link: http://lkml.kernel.org/r/159262475441.185015.5300725180746017555.stgit@devnote2 Fixes: 726721a51838 ("tracing: Move synthetic events to a separate file") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-23ring-buffer: Zero out time extend if it is nested and not absoluteSteven Rostedt (VMware)
Currently the ring buffer makes events that happen in interrupts that preempt another event have a delta of zero. (Hopefully we can change this soon). But this is to deal with the races of updating a global counter with lockless and nesting functions updating deltas. With the addition of absolute time stamps, the time extend didn't follow this rule. A time extend can happen if two events happen longer than 2^27 nanoseconds appart, as the delta time field in each event is only 27 bits. If that happens, then a time extend is injected with 2^59 bits of nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between two events, and as it is writing the event, an interrupt triggers, it will see the 2^27 difference as well and inject a time extend of its own. But a recent change made the time extend logic not take into account the nesting, and this can cause two time extend deltas to happen moving the time stamp much further ahead than the current time. This gets all reset when the ring buffer moves to the next page, but that can cause time to appear to go backwards. This was observed in a trace-cmd recording, and since the data is saved in a file, with trace-cmd report --debug, it was possible to see that this indeed did happen! bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [12770284:0x2e8:64] <idle>-0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64] TIME EXTEND: delta:306454770 length:0 bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48] TIME EXTEND: delta:306458165 length:0 bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40] and at the next page, caused the time to go backwards: bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64] CPU:110 [SUBBUFFER START] [81779379165886:0x1320000] <idle>-0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40] <idle>-0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64] Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Cc: stable@vger.kernel.org Fixes: dc4e2801d400b ("ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP") Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-20Merge tag 'trace-v5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Have recordmcount work with > 64K sections (to support LTO) - kprobe RCU fixes - Correct a kprobe critical section with missing mutex - Remove redundant arch_disarm_kprobe() call - Fix lockup when kretprobe triggers within kprobe_flush_task() - Fix memory leak in fetch_op_data operations - Fix sleep in atomic in ftrace trace array sample code - Free up memory on failure in sample trace array code - Fix incorrect reporting of function_graph fields in format file - Fix quote within quote parsing in bootconfig - Fix return value of bootconfig tool - Add testcases for bootconfig tool - Fix maybe uninitialized warning in ftrace pid file code - Remove unused variable in tracing_iter_reset() - Fix some typos * tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix maybe-uninitialized compiler warning tools/bootconfig: Add testcase for show-command and quotes test tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig tools/bootconfig: Fix to use correct quotes for value proc/bootconfig: Fix to use correct quotes for value tracing: Remove unused event variable in tracing_iter_reset tracing/probe: Fix memleak in fetch_op_data operations trace: Fix typo in allocate_ftrace_ops()'s comment tracing: Make ftrace packed events have align of 1 sample-trace-array: Remove trace_array 'sample-instance' sample-trace-array: Fix sleeping function called from invalid context kretprobe: Prevent triggering kretprobe from within kprobe_flush_task kprobes: Remove redundant arch_disarm_kprobe() call kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex kprobes: Use non RCU traversal APIs on kprobe_tables if possible kprobes: Suppress the suspicious RCU warning on kprobes recordmcount: support >64k sections
2020-06-19Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Use import_uuid() where appropriate (Andy) - bcache fixes (Coly, Mauricio, Zhiqiang) - blktrace sparse warnings fix (Jan) - blktrace concurrent setup fix (Luis) - blkdev_get use-after-free fix (Jason) - Ensure all blk-mq maps are updated (Weiping) - Loop invalidate bdev fix (Zheng) * tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block: block: make function 'kill_bdev' static loop: replace kill_bdev with invalidate_bdev partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense block: update hctx map when use multiple maps blktrace: Avoid sparse warnings when assigning q->blk_trace blktrace: break out of blktrace setup on concurrent calls block: Fix use-after-free in blkdev_get() trace/events/block.h: drop kernel-doc for dropped function parameter blk-mq: Remove redundant 'return' statement bcache: pr_info() format clean up in bcache_device_init() bcache: use delayed kworker fo asynchronous devices registration bcache: check and adjust logical block size for backing devices bcache: fix potential deadlock problem in btree_gc_coalesce
2020-06-18Merge branch 'hch' (maccess patches from Christoph Hellwig)Linus Torvalds
Merge non-faulting memory access cleanups from Christoph Hellwig: "Andrew and I decided to drop the patches implementing your suggested rename of the probe_kernel_* and probe_user_* helpers from -mm as there were way to many conflicts. After -rc1 might be a good time for this as all the conflicts are resolved now" This also adds a type safety checking patch on top of the renaming series to make the subtle behavioral difference between 'get_user()' and 'get_kernel_nofault()' less potentially dangerous and surprising. * emailed patches from Christoph Hellwig <hch@lst.de>: maccess: make get_kernel_nofault() check for minimal type compatibility maccess: rename probe_kernel_address to get_kernel_nofault maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
2020-06-17ftrace: Fix maybe-uninitialized compiler warningKaitao Cheng
During build compiler reports some 'false positive' warnings about variables {'seq_ops', 'filtered_pids', 'other_pids'} may be used uninitialized. This patch silences these warnings. Also delete some useless spaces Link: https://lkml.kernel.org/r/20200529141214.37648-1-pilgrimtao@gmail.com Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 2 day(s) which contain a total of 14 files changed, 158 insertions(+), 59 deletions(-). The main changes are: 1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii. 2) [gs]etsockopt fix for large optlen, from Stanislav. 3) devmap allocation fix, from Toke. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17bpf: bpf_probe_read_kernel_str() has to return amount of data read on successAndrii Nakryiko
During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on success, instead of amount of data successfully read. This majorly breaks applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str() and their results. Fix this by returning actual number of bytes read. Fixes: 8d92db5c04d1 ("bpf: rework the compat kernel probe handling") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616050432.1902042-1-andriin@fb.com
2020-06-17blktrace: Avoid sparse warnings when assigning q->blk_traceJan Kara
Mostly for historical reasons, q->blk_trace is assigned through xchg() and cmpxchg() atomic operations. Although this is correct, sparse complains about this because it violates rcu annotations since commit c780e86dd48e ("blktrace: Protect q->blk_trace with RCU") which started to use rcu for accessing q->blk_trace. Furthermore there's no real need for atomic operations anymore since all changes to q->blk_trace happen under q->blk_trace_mutex and since it also makes more sense to check if q->blk_trace is set with the mutex held earlier. So let's just replace xchg() with rcu_replace_pointer() and cmpxchg() with explicit check and rcu_assign_pointer(). This makes the code more efficient and sparse happy. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-17blktrace: break out of blktrace setup on concurrent callsLuis Chamberlain
We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-16tracing: Remove unused event variable in tracing_iter_resetYangHui
We do not use the event variable, just remove it. Signed-off-by: YangHui <yanghui.def@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-16tracing/probe: Fix memleak in fetch_op_data operationsVamshi K Sthambamkadi
kmemleak report: [<57dcc2ca>] __kmalloc_track_caller+0x139/0x2b0 [<f1c45d0f>] kstrndup+0x37/0x80 [<f9761eb0>] parse_probe_arg.isra.7+0x3cc/0x630 [<055bf2ba>] traceprobe_parse_probe_arg+0x2f5/0x810 [<655a7766>] trace_kprobe_create+0x2ca/0x950 [<4fc6a02a>] create_or_delete_trace_kprobe+0xf/0x30 [<6d1c8a52>] trace_run_command+0x67/0x80 [<be812cc0>] trace_parse_run_command+0xa7/0x140 [<aecfe401>] probes_write+0x10/0x20 [<2027641c>] __vfs_write+0x30/0x1e0 [<6a4aeee1>] vfs_write+0x96/0x1b0 [<3517fb7d>] ksys_write+0x53/0xc0 [<dad91db7>] __ia32_sys_write+0x15/0x20 [<da347f64>] do_syscall_32_irqs_on+0x3d/0x260 [<fd0b7e7d>] do_fast_syscall_32+0x39/0xb0 [<ea5ae810>] entry_SYSENTER_32+0xaf/0x102 Post parse_probe_arg(), the FETCH_OP_DATA operation type is overwritten to FETCH_OP_ST_STRING, as a result memory is never freed since traceprobe_free_probe_arg() iterates only over SYMBOL and DATA op types Setup fetch string operation correctly after fetch_op_data operation. Link: https://lkml.kernel.org/r/20200615143034.GA1734@cosmos Cc: stable@vger.kernel.org Fixes: a42e3c4de964 ("tracing/probe: Add immediate string parameter support") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-16trace: Fix typo in allocate_ftrace_ops()'s commentWei Yang
No functional change, just correct the word. Link: https://lkml.kernel.org/r/20200610033251.31713-1-richard.weiyang@linux.alibaba.com Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-16tracing: Make ftrace packed events have align of 1Steven Rostedt (VMware)
When using trace-cmd on 5.6-rt for the function graph tracer, the output was corrupted. It gave output like this: funcgraph_entry: func=0xffffffff depth=38982 funcgraph_entry: func=0x1ffffffff depth=16044 funcgraph_exit: func=0xffffffff overrun=0x92539aaf00000000 calltime=0x92539c9900000072 rettime=0x100000072 depth=11084 funcgraph_exit: func=0xffffffff overrun=0x9253946e00000000 calltime=0x92539e2100000072 rettime=0x72 depth=26033702 funcgraph_entry: func=0xffffffff depth=85798 funcgraph_entry: func=0x1ffffffff depth=12044 The reason was because the tracefs/events/ftrace/funcgraph_entry/exit format file was incorrect. The -rt kernel adds more common fields to the trace events. Namely, common_migrate_disable and common_preempt_lazy_count. Each is one byte in size. This changes the alignment of the normal payload. Most events are aligned normally, but the function and function graph events are defined with a "PACKED" macro, that packs their payload. As the offsets displayed in the format files are now calculated by an aligned field, the aligned field for function and function graph events should be 1, not their normal alignment. With aligning of the funcgraph_entry event, the format file has: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned char common_migrate_disable; offset:8; size:1; signed:0; field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0; field:unsigned long func; offset:16; size:8; signed:0; field:int depth; offset:24; size:4; signed:1; But the actual alignment is: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:unsigned char common_migrate_disable; offset:8; size:1; signed:0; field:unsigned char common_preempt_lazy_count; offset:9; size:1; signed:0; field:unsigned long func; offset:12; size:8; signed:0; field:int depth; offset:20; size:4; signed:1; Link: https://lkml.kernel.org/r/20200609220041.2a3b527f@oasis.local.home Cc: stable@vger.kernel.org Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-15tracing/probe: Replace zero-length array with flexible-arrayGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-13Merge tag 'x86-entry-2020-06-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 entry updates from Thomas Gleixner: "The x86 entry, exception and interrupt code rework This all started about 6 month ago with the attempt to move the Posix CPU timer heavy lifting out of the timer interrupt code and just have lockless quick checks in that code path. Trivial 5 patches. This unearthed an inconsistency in the KVM handling of task work and the review requested to move all of this into generic code so other architectures can share. Valid request and solved with another 25 patches but those unearthed inconsistencies vs. RCU and instrumentation. Digging into this made it obvious that there are quite some inconsistencies vs. instrumentation in general. The int3 text poke handling in particular was completely unprotected and with the batched update of trace events even more likely to expose to endless int3 recursion. In parallel the RCU implications of instrumenting fragile entry code came up in several discussions. The conclusion of the x86 maintainer team was to go all the way and make the protection against any form of instrumentation of fragile and dangerous code pathes enforcable and verifiable by tooling. A first batch of preparatory work hit mainline with commit d5f744f9a2ac ("Pull x86 entry code updates from Thomas Gleixner") That (almost) full solution introduced a new code section '.noinstr.text' into which all code which needs to be protected from instrumentation of all sorts goes into. Any call into instrumentable code out of this section has to be annotated. objtool has support to validate this. Kprobes now excludes this section fully which also prevents BPF from fiddling with it and all 'noinstr' annotated functions also keep ftrace off. The section, kprobes and objtool changes are already merged. The major changes coming with this are: - Preparatory cleanups - Annotating of relevant functions to move them into the noinstr.text section or enforcing inlining by marking them __always_inline so the compiler cannot misplace or instrument them. - Splitting and simplifying the idtentry macro maze so that it is now clearly separated into simple exception entries and the more interesting ones which use interrupt stacks and have the paranoid handling vs. CR3 and GS. - Move quite some of the low level ASM functionality into C code: - enter_from and exit to user space handling. The ASM code now calls into C after doing the really necessary ASM handling and the return path goes back out without bells and whistels in ASM. - exception entry/exit got the equivivalent treatment - move all IRQ tracepoints from ASM to C so they can be placed as appropriate which is especially important for the int3 recursion issue. - Consolidate the declaration and definition of entry points between 32 and 64 bit. They share a common header and macros now. - Remove the extra device interrupt entry maze and just use the regular exception entry code. - All ASM entry points except NMI are now generated from the shared header file and the corresponding macros in the 32 and 64 bit entry ASM. - The C code entry points are consolidated as well with the help of DEFINE_IDTENTRY*() macros. This allows to ensure at one central point that all corresponding entry points share the same semantics. The actual function body for most entry points is in an instrumentable and sane state. There are special macros for the more sensitive entry points, e.g. INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF. They allow to put the whole entry instrumentation and RCU handling into safe places instead of the previous pray that it is correct approach. - The INT3 text poke handling is now completely isolated and the recursion issue banned. Aside of the entry rework this required other isolation work, e.g. the ability to force inline bsearch. - Prevent #DB on fragile entry code, entry relevant memory and disable it on NMI, #MC entry, which allowed to get rid of the nested #DB IST stack shifting hackery. - A few other cleanups and enhancements which have been made possible through this and already merged changes, e.g. consolidating and further restricting the IDT code so the IDT table becomes RO after init which removes yet another popular attack vector - About 680 lines of ASM maze are gone. There are a few open issues: - An escape out of the noinstr section in the MCE handler which needs some more thought but under the aspect that MCE is a complete trainwreck by design and the propability to survive it is low, this was not high on the priority list. - Paravirtualization When PV is enabled then objtool complains about a bunch of indirect calls out of the noinstr section. There are a few straight forward ways to fix this, but the other issues vs. general correctness were more pressing than parawitz. - KVM KVM is inconsistent as well. Patches have been posted, but they have not yet been commented on or picked up by the KVM folks. - IDLE Pretty much the same problems can be found in the low level idle code especially the parts where RCU stopped watching. This was beyond the scope of the more obvious and exposable problems and is on the todo list. The lesson learned from this brain melting exercise to morph the evolved code base into something which can be validated and understood is that once again the violation of the most important engineering principle "correctness first" has caused quite a few people to spend valuable time on problems which could have been avoided in the first place. The "features first" tinkering mindset really has to stop. With that I want to say thanks to everyone involved in contributing to this effort. Special thanks go to the following people (alphabetical order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra, Vitaly Kuznetsov, and Will Deacon" * tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits) x86/entry: Force rcu_irq_enter() when in idle task x86/entry: Make NMI use IDTENTRY_RAW x86/entry: Treat BUG/WARN as NMI-like entries x86/entry: Unbreak __irqentry_text_start/end magic x86/entry: __always_inline CR2 for noinstr lockdep: __always_inline more for noinstr x86/entry: Re-order #DB handler to avoid *SAN instrumentation x86/entry: __always_inline arch_atomic_* for noinstr x86/entry: __always_inline irqflags for noinstr x86/entry: __always_inline debugreg for noinstr x86/idt: Consolidate idt functionality x86/idt: Cleanup trap_init() x86/idt: Use proper constants for table size x86/idt: Add comments about early #PF handling x86/idt: Mark init only functions __init x86/entry: Rename trace_hardirqs_off_prepare() x86/entry: Clarify irq_{enter,exit}_rcu() x86/entry: Remove DBn stacks x86/entry: Remove debug IDT frobbing x86/entry: Optimize local_db_save() for virt ...
2020-06-11Merge tag 'locking-kcsan-2020-06-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull the Kernel Concurrency Sanitizer from Thomas Gleixner: "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support" * tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining compiler.h: Move function attributes to compiler_types.h compiler.h: Avoid nested statement expression in data_race() compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE() kcsan: Update Documentation to change supported compilers kcsan: Remove 'noinline' from __no_kcsan_or_inline kcsan: Pass option tsan-instrument-read-before-write to Clang kcsan: Support distinguishing volatile accesses kcsan: Restrict supported compilers kcsan: Avoid inserting __tsan_func_entry/exit if possible ubsan, kcsan: Don't combine sanitizer with kcov on clang objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn() kcsan: Add __kcsan_{enable,disable}_current() variants checkpatch: Warn about data_race() without comment kcsan: Use GFP_ATOMIC under spin lock Improve KCSAN documentation a bit kcsan: Make reporting aware of KCSAN tests kcsan: Fix function matching in report kcsan: Change data_race() to no longer require marking racing accesses kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h ...
2020-06-11Merge tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Some followup fixes for this merge window. In particular: - Seqcount write missing preemption disable for stats (Ahmed) - blktrace fixes (Chaitanya) - Redundant initializations (Colin) - Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max, Niklas, Rikard) - loop flag bug regression fix (Martijn) - blk-mq tagging fixes (Christoph, Ming)" * tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block: umem: remove redundant initialization of variable ret pktcdvd: remove redundant initialization of variable ret nvmet: fail outstanding host posted AEN req nvme-pci: use simple suspend when a HMB is enabled nvme-fc: don't call nvme_cleanup_cmd() for AENs nvmet-tcp: constify nvmet_tcp_ops nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops nvme: do not call del_gendisk() on a disk that was never added blk-mq: fix blk_mq_all_tag_iter blk-mq: split out a __blk_mq_get_driver_tag helper blktrace: fix endianness for blk_log_remap() blktrace: fix endianness in get_pdu_int() blktrace: use errno instead of bi_status block: nr_sects_write(): Disable preemption on seqcount write block: remove the error argument to the block_bio_complete tracepoint loop: Fix wrong masking of status flags block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
2020-06-11Rebase locking/kcsan to locking/urgentThomas Gleixner
Merge the state of the locking kcsan branch before the read/write_once() and the atomics modifications got merged. Squash the fallout of the rebase on top of the read/write once and atomic fallback work into the merge. The history of the original branch is preserved in tag locking-kcsan-2020-06-02. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2020-06-11x86/entry: Rename trace_hardirqs_off_prepare()Peter Zijlstra
The typical pattern for trace_hardirqs_off_prepare() is: ENTRY lockdep_hardirqs_off(); // because hardware ... do entry magic instrumentation_begin(); trace_hardirqs_off_prepare(); ... do actual work trace_hardirqs_on_prepare(); lockdep_hardirqs_on_prepare(); instrumentation_end(); ... do exit magic lockdep_hardirqs_on(); which shows that it's named wrong, rename it to trace_hardirqs_off_finish(), as it concludes the hardirq_off transition. Also, given that the above is the only correct order, make the traditional all-in-one trace_hardirqs_off() follow suit. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.415774872@infradead.org
2020-06-10Merge branch 'work.sysctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sysctl fixes from Al Viro: "Fixups to regressions in sysctl series" * 'work.sysctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysctl: reject gigantic reads/write to sysctl files cdrom: fix an incorrect __user annotation on cdrom_sysctl_info trace: fix an incorrect __user annotation on stack_trace_sysctl random: fix an incorrect __user annotation on proc_do_entropy net/sysctl: remove leftover __user annotations on neigh_proc_dointvec* net/sysctl: use cpumask_parse in flow_limit_cpu_sysctl
2020-06-09tracing/probe: Fix bpf_task_fd_query() for kprobes and uprobesJean-Philippe Brucker
Commit 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") removed the trace_[ku]probe structure from the trace_event_call->data pointer. As bpf_get_[ku]probe_info() were forgotten in that change, fix them now. These functions are currently only used by the bpf_task_fd_query() syscall handler to collect information about a perf event. Fixes: 60d53e2c3b75 ("tracing/probe: Split trace_event related data from trace_probe") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/20200608124531.819838-1-jean-philippe@linaro.org
2020-06-09Merge tag 'trace-v5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "No new features this release. Mostly clean ups, restructuring and documentation. - Have ftrace_bug() show ftrace errors before the WARN, as the WARN will reboot the box before the error messages are printed if panic_on_warn is set. - Have traceoff_on_warn disable tracing sooner (before prints) - Write a message to the trace buffer that its being disabled when disable_trace_on_warning() is set. - Separate out synthetic events from histogram code to let it be used by other parts of the kernel. - More documentation on histogram design. - Other small fixes and clean ups" * tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option tracing/doc: Fix ascii-art in histogram-design.rst tracing: Add a trace print when traceoff_on_warning is triggered ftrace,bug: Improve traceoff_on_warn selftests/ftrace: Distinguish between hist and synthetic event checks tracing: Move synthetic events to a separate file tracing: Fix events.rst section numbering tracing/doc: Fix typos in histogram-design.rst tracing: Add hist_debug trace event files for histogram debugging tracing: Add histogram-design document tracing: Check state.disabled in synth event trace functions tracing/probe: reverse arguments to list_add tools/bootconfig: Add a summary of test cases and return error ftrace: show debugging information when panic_on_warn set
2020-06-09maccess: always use strict semantics for probe_kernel_readChristoph Hellwig
Except for historical confusion in the kprobes/uprobes and bpf tracers, which has been fixed now, there is no good reason to ever allow user memory accesses from probe_kernel_read. Switch probe_kernel_read to only read from kernel memory. [akpm@linux-foundation.org: update it for "mm, dump_page(): do not crash with invalid mapping pointer"] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-17-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09tracing/kprobes: handle mixed kernel/userspace probes betterChristoph Hellwig
Instead of using the dangerous probe_kernel_read and strncpy_from_unsafe helpers, rework probes to try a user probe based on the address if the architecture has a common address space for kernel and userspace. [svens@linux.ibm.com:use strncpy_from_kernel_nofault() in fetch_store_string()] Link: http://lkml.kernel.org/r/20200606181903.49384-1-svens@linux.ibm.com Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-15-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09bpf: rework the compat kernel probe handlingChristoph Hellwig
Instead of using the dangerous probe_kernel_read and strncpy_from_unsafe helpers, rework the compat probes to check if an address is a kernel or userspace one, and then use the low-level kernel or user probe helper shared by the proper kernel and user probe helpers. This slightly changes behavior as the compat probe on a user address doesn't check the lockdown flags, just as the pure user probes do. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-14-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09bpf:bpf_seq_printf(): handle potentially unsafe format string betterAndrew Morton
User the proper helper for kernel or userspace addresses based on TASK_SIZE instead of the dangerous strncpy_from_unsafe function. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09bpf: handle the compat string in bpf_trace_copy_string betterChristoph Hellwig
User the proper helper for kernel or userspace addresses based on TASK_SIZE instead of the dangerous strncpy_from_unsafe function. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-13-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09bpf: factor out a bpf_trace_copy_string helperChristoph Hellwig
Split out a helper to do the fault free access to the string pointer to get it out of a crazy indentation level. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-12-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09maccess: rename strnlen_unsafe_user to strnlen_user_nofaultChristoph Hellwig
This matches the naming of strnlen_user, and also makes it more clear what the function is supposed to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-9-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofaultChristoph Hellwig
This matches the naming of strncpy_from_user_nofault, and also makes it more clear what the function is supposed to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-8-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofaultChristoph Hellwig
This matches the naming of strncpy_from_user, and also makes it more clear what the function is supposed to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20200521152301.2587579-7-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09kallsyms/printk: add loglvl to print_ip_sym()Dmitry Safonov
Patch series "Add log level to show_stack()", v3. Add log level argument to show_stack(). Done in three stages: 1. Introducing show_stack_loglvl() for every architecture 2. Migrating old users with an explicit log level 3. Renaming show_stack_loglvl() into show_stack() Justification: - It's a design mistake to move a business-logic decision into platform realization detail. - I have currently two patches sets that would benefit from this work: Removing console_loglevel jumps in sysrq driver [1] Hung task warning before panic [2] - suggested by Tetsuo (but he probably didn't realise what it would involve). - While doing (1), (2) the backtraces were adjusted to headers and other messages for each situation - so there won't be a situation when the backtrace is printed, but the headers are missing because they have lesser log level (or the reverse). - As the result in (2) plays with console_loglevel for kdb are removed. The least important for upstream, but maybe still worth to note that every company I've worked in so far had an off-list patch to print backtrace with the needed log level (but only for the architecture they cared about). If you have other ideas how you will benefit from show_stack() with a log level - please, reply to this cover letter. See also discussion on v1: https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/ This patch (of 50): print_ip_sym() needs to have a log level parameter to comply with other parts being printed. Otherwise, half of the expected backtrace would be printed and other may be missing with some logging level. The following callee(s) are using now the adjusted log level: - microblaze/unwind: the same level as headers & userspace unwind. Note that pr_debug()'s there are for debugging the unwinder itself. - nds32/traps: symbol addresses are printed with the same log level as backtrace headers. - lockdep: ip for locking issues is printed with the same log level as other part of the warning. - sched: ip where preemption was disabled is printed as error like the rest part of the message. - ftrace: bug reports are now consistent in the log level being used. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08trace: fix an incorrect __user annotation on stack_trace_sysctlChristoph Hellwig
No user pointers for sysctls anymore. Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Reported-by: build test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-06-05tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig optionMel Gorman
The PREEMPTIRQ_EVENTS option is unused after commit c3bc8fd637a9 ("tracing: Centralize preemptirq tracepoints and unify their usage"). Remove it. Note that this option is hazardous as it stands. It enables TRACE_IRQFLAGS event on non-preempt configurations without the irqsoff tracer enabled. TRACE_IRQFLAGS as it stands incurs significant overhead on each IRQ entry/exit. This is because trace_hardirqs_[on|off] does all the per-cpu manipulations and NMI checks even if tracing is completely disabled for some insane reason. For example, netperf running UDP_STREAM on localhost incurs a 4-6% performance penalty without any tracing if IRQFLAGS is set. It can be put behind a static brach but even the function entry/exit costs a little bit. Link: https://lkml.kernel.org/r/20200409104034.GJ3818@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-06-04blktrace: fix endianness for blk_log_remap()Chaitanya Kulkarni
The function blk_log_remap() can be simplified by removing the call to get_pdu_remap() that copies the values into extra variable to print the data, which also fixes the endiannness warning reported by sparse. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04blktrace: fix endianness in get_pdu_int()Chaitanya Kulkarni
In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04blktrace: use errno instead of bi_statusChaitanya Kulkarni
In blk_add_trace_spliti() blk_add_trace_bio_remap() use blk_status_to_errno() to pass the error instead of pasing the bi_status. This fixes the sparse warning. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-04block: remove the error argument to the block_bio_complete tracepointChristoph Hellwig
The status can be trivially derived from the bio itself. That also avoid callers like NVMe to incorrectly pass a blk_status_t instead of the errno, and the overhead of translating the blk_status_t to the errno in the I/O completion fast path when no tracing is enabled. Fixes: 35fe0d12c8a3 ("nvme: trace bio completion") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-03Merge branch 'work.splice' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull splice updates from Al Viro: "Christoph's assorted splice cleanups" * 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: rename pipe_buf ->steal to ->try_steal fs: make the pipe_buf_operations ->confirm operation optional fs: make the pipe_buf_operations ->steal operation optional trace: remove tracing_pipe_buf_ops pipe: merge anon_pipe_buf*_ops fs: simplify do_splice_from fs: simplify do_splice_to
2020-06-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "ARM: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches x86: - Rework of TLB flushing - Rework of event injection, especially with respect to nested virtualization - Nested AMD event injection facelift, building on the rework of generic code and fixing a lot of corner cases - Nested AMD live migration support - Optimization for TSC deadline MSR writes and IPIs - Various cleanups - Asynchronous page fault cleanups (from tglx, common topic branch with tip tree) - Interrupt-based delivery of asynchronous "page ready" events (host side) - Hyper-V MSRs and hypercalls for guest debugging - VMX preemption timer fixes s390: - Cleanups Generic: - switch vCPU thread wakeup from swait to rcuwait The other architectures, and the guest side of the asynchronous page fault work, will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits) KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test KVM: check userspace_addr for all memslots KVM: selftests: update hyperv_cpuid with SynDBG tests x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls x86/kvm/hyper-v: enable hypercalls regardless of hypercall page x86/kvm/hyper-v: Add support for synthetic debugger interface x86/hyper-v: Add synthetic debugger definitions KVM: selftests: VMX preemption timer migration test KVM: nVMX: Fix VMX preemption timer migration x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit KVM: x86/pmu: Support full width counting KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT KVM: x86: acknowledgment mechanism for async pf page ready notifications KVM: x86: interrupt based APF 'page ready' event delivery KVM: introduce kvm_read_guest_offset_cached() KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present() KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously" KVM: VMX: Replace zero-length array with flexible-array ...
2020-06-02Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 22:38:24 +0000