summaryrefslogtreecommitdiff
path: root/kernel/trace/trace_events_hist.c
AgeCommit message (Collapse)Author
2019-05-21tracing: Add a check_val() check before updating cond_snapshot() track_valTom Zanussi
Without this check a snapshot is taken whenever a bucket's max is hit, rather than only when the global max is hit, as it should be. Before: In this example, we do a first run of the workload (cyclictest), examine the output, note the max ('triggering value') (347), then do a second run and note the max again. In this case, the max in the second run (39) is below the max in the first run, but since we haven't cleared the histogram, the first max is still in the histogram and is higher than any other max, so it should still be the max for the snapshot. It isn't however - the value should still be 347 after the second run. # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2143 } hitcount: 199 max: 44 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2145 } hitcount: 1325 max: 38 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2144 } hitcount: 1982 max: 347 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 347 triggered by event with key: { next_pid: 2144 } # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2143 } hitcount: 199 max: 44 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2148 } hitcount: 199 max: 16 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/1 { next_pid: 2145 } hitcount: 1325 max: 38 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2150 } hitcount: 1326 max: 39 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2144 } hitcount: 1982 max: 347 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2149 } hitcount: 1983 max: 130 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/0 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 39 triggered by event with key: { next_pid: 2150 } After: In this example, we do a first run of the workload (cyclictest), examine the output, note the max ('triggering value') (375), then do a second run and note the max again. In this case, the max in the second run is still 375, the highest in any bucket, as it should be. # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2072 } hitcount: 200 max: 28 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/5 { next_pid: 2074 } hitcount: 1323 max: 375 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2073 } hitcount: 1980 max: 153 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 375 triggered by event with key: { next_pid: 2074 } # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2101 } hitcount: 199 max: 49 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2072 } hitcount: 200 max: 28 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/5 { next_pid: 2074 } hitcount: 1323 max: 375 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2103 } hitcount: 1325 max: 74 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2073 } hitcount: 1980 max: 153 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2102 } hitcount: 1981 max: 84 next_prio: 19 next_comm: cyclictest prev_pid: 12 prev_prio: 120 prev_comm: kworker/0:1 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 375 triggered by event with key: { next_pid: 2074 } Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com Cc: stable@vger.kernel.org Fixes: a3785b7eca8fd ("tracing: Add hist trigger snapshot() action") Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-21tracing: Check keys for variable references in expressions tooTom Zanussi
There's an existing check for variable references in keys, but it doesn't go far enough. It checks whether a key field is a variable reference but doesn't check whether it's an expression containing variable references, which can cause the same problems for callers. Use the existing field_has_hist_vars() function rather than a direct top-level flag check to catch all possible variable references. Link: http://lkml.kernel.org/r/e8c3d3d53db5ca90ceea5a46e5413103a6902fc7.1555597045.git.tom.zanussi@linux.intel.com Cc: stable@vger.kernel.org Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reported-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-21tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_eltsTom Zanussi
hist_field_var_ref() is an implementation of hist_field_fn_t(), which can be called with a null tracing_map_elt elt param when assembling a key in event_hist_trigger(). In the case of hist_field_var_ref() this doesn't make sense, because a variable can only be resolved by looking it up using an already assembled key i.e. a variable can't be used to assemble a key since the key is required in order to access the variable. Upper layers should prevent the user from constructing a key using a variable in the first place, but in case one slips through, it shouldn't cause a NULL pointer dereference. Also if one does slip through, we want to know about it, so emit a one-time warning in that case. Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com Reported-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-15Merge tag 'trace-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major changes in this tracing update includes: - Removal of non-DYNAMIC_FTRACE from 32bit x86 - Removal of mcount support from x86 - Emulating a call from int3 on x86_64, fixes live kernel patching - Consolidated Tracing Error logs file Minor updates: - Removal of klp_check_compiler_support() - kdb ftrace dumping output changes - Accessing and creating ftrace instances from inside the kernel - Clean up of #define if macro - Introduction of TRACE_EVENT_NOP() to disable trace events based on config options And other minor fixes and clean ups" * tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) x86: Hide the int3_emulate_call/jmp functions from UML livepatch: Remove klp_check_compiler_support() ftrace/x86: Remove mcount support ftrace/x86_32: Remove support for non DYNAMIC_FTRACE tracing: Simplify "if" macro code tracing: Fix documentation about disabling options using trace_options tracing: Replace kzalloc with kcalloc tracing: Fix partial reading of trace event's id file tracing: Allow RCU to run between postponed startup tests tracing: Fix white space issues in parse_pred() function tracing: Eliminate const char[] auto variables ring-buffer: Fix mispelling of Calculate tracing: probeevent: Fix to make the type of $comm string tracing: probeevent: Do not accumulate on ret variable tracing: uprobes: Re-enable $comm support for uprobe events ftrace/x86_64: Emulate call function while updating in breakpoint handler x86_64: Allow breakpoints to emulate call instructions x86_64: Add gap to int3 to allow for call emulation tracing: kdb: Allow ftdump to skip all but the last few entries tracing: Add trace_total_entries() / trace_total_entries_cpu() ...
2019-04-29tracing: Simplify stacktrace retrieval in histogramsThomas Gleixner
The indirection through struct stack_trace is not necessary at all. Use the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094802.979089273@linutronix.de
2019-04-14tracing: Remove the ULONG_MAX stack trace hackeryThomas Gleixner
No architecture terminates the stack trace with ULONG_MAX anymore. As the code checks the number of entries stored anyway there is no point in keeping all that ULONG_MAX magic around. The histogram code zeroes the storage before saving the stack, so if the trace is shorter than the maximum number of entries it can terminate the print loop if a zero entry is detected. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Link: https://lkml.kernel.org/r/20190410103645.048761764@linutronix.de
2019-04-08tracing: Have the error logs show up in the proper instancesSteven Rostedt (VMware)
As each instance has their own error_log file, it makes more sense that the instances show the errors of their own instead of all error_logs having the same data. Make it that the errors show up in the instance error_log file that the error happens in. If no instance trace_array is available, then NULL can be passed in which will create the error in the top level instance (the one at the top of the tracefs directory). Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08tracing: Have histogram code pass around trace_array for error handlingSteven Rostedt (VMware)
Have the trace_array that associates the trace instance of the histogram passed around to functions so that error handling can display the error message in the proper instance. Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-02tracing: Use tracing error_log with hist triggersTom Zanussi
Replace hist_err() and hist_err_event() with tracing_log_err() from the new tracing error_log mechanism. Also add a couple related helper functions and remove most of the old hist_err()-related code. With this change, users no longer read the hist files for hist trigger error information, but instead look at tracing/error_log for the same information. Link: http://lkml.kernel.org/r/c98f77a97c9715d18b623eeb5741057b330d5ac0.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-02tracing: Save the last hist command's associated event nameTom Zanussi
In preparation for making use of the new trace error log, save the subsystem and event name associated with the last hist command - it will be passed as the location param in the event_log_err() calls. Link: http://lkml.kernel.org/r/eb0fd1362be8f39facb86c83eecf441b7a5876f8.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-26tracing: Remove unnecessary var_ref destroy in track_data_destroy()Tom Zanussi
Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to destroy var_refs) centralized the destruction of all the var_refs in one place so that other code didn't have to do it. The track_data_destroy() added later ignored that and also destroyed the track_data var_ref, causing a double-free error flagged by KASAN. ================================================================== BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70 Read of size 8 at addr ffff888086df2210 by task bash/1694 CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x71/0xa0 ? destroy_hist_field+0x30/0x70 print_address_description.cold.3+0x9/0x1fb ? destroy_hist_field+0x30/0x70 ? destroy_hist_field+0x30/0x70 kasan_report.cold.4+0x1a/0x33 ? __kasan_slab_free+0x100/0x150 ? destroy_hist_field+0x30/0x70 destroy_hist_field+0x30/0x70 track_data_destroy+0x55/0xe0 destroy_hist_data+0x1f0/0x350 hist_unreg_all+0x203/0x220 event_trigger_open+0xbb/0x130 do_dentry_open+0x296/0x700 ? stacktrace_count_trigger+0x30/0x30 ? generic_permission+0x56/0x200 ? __x64_sys_fchdir+0xd0/0xd0 ? inode_permission+0x55/0x200 ? security_inode_permission+0x18/0x60 path_openat+0x633/0x22b0 ? path_lookupat.isra.50+0x420/0x420 ? __kasan_kmalloc.constprop.12+0xc1/0xd0 ? kmem_cache_alloc+0xe5/0x260 ? getname_flags+0x6c/0x2a0 ? do_sys_open+0x149/0x2b0 ? do_syscall_64+0x73/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? _raw_write_lock_bh+0xe0/0xe0 ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x2f/0x50 ? __list_add_valid+0x2d/0x70 ? deactivate_slab.isra.62+0x1f4/0x5a0 ? getname_flags+0x6c/0x2a0 ? set_track+0x76/0x120 do_filp_open+0x11a/0x1a0 ? may_open_dev+0x50/0x50 ? _raw_spin_lock+0x7a/0xd0 ? _raw_write_lock_bh+0xe0/0xe0 ? __alloc_fd+0x10f/0x200 do_sys_open+0x1db/0x2b0 ? filp_open+0x50/0x50 do_syscall_64+0x73/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa7b24a4ca2 Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2 RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240 ================================================================== So remove the track_data_destroy() destroy_hist_field() call for that var_ref. Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action") Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-05tracing: Use strncpy instead of memcpy when copying comm for hist triggersTom Zanussi
Because there may be random garbage beyond a string's null terminator, code that might use the entire comm array e.g. histogram keys, can give unexpected results if that garbage is copied in too, so avoid that possibility by using strncpy instead of memcpy. Link: http://lkml.kernel.org/r/1eb9f096a8086c3c82c7fc087c900005143cec54.1551802084.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-05tracing: Use strncpy instead of memcpy for string keys in hist triggersTom Zanussi
Because there may be random garbage beyond a string's null terminator, it's not correct to copy the the complete character array for use as a hist trigger key. This results in multiple histogram entries for the 'same' string key. So, in the case of a string key, use strncpy instead of memcpy to avoid copying in the extra bytes. Before, using the gdbus entries in the following hist trigger as an example: # echo 'hist:key=comm' > /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist ... { comm: ImgDecoder #4 } hitcount: 203 { comm: gmain } hitcount: 213 { comm: gmain } hitcount: 216 { comm: StreamTrans #73 } hitcount: 221 { comm: mozStorage #3 } hitcount: 230 { comm: gdbus } hitcount: 233 { comm: StyleThread#5 } hitcount: 253 { comm: gdbus } hitcount: 256 { comm: gdbus } hitcount: 260 { comm: StyleThread#4 } hitcount: 271 ... # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l 51 After: # cat /sys/kernel/debug/tracing/events/sched/sched_waking/hist | egrep gdbus | wc -l 1 Link: http://lkml.kernel.org/r/50c35ae1267d64eee975b8125e151e600071d4dc.1549309756.git.tom.zanussi@linux.intel.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Fixes: 79e577cbce4c4 ("tracing: Support string type key properly") Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-05tracing: Use str_has_prefix() in synth_event_create()Tom Zanussi
Since we now have a str_has_prefix() that returns the length, we can use that instead of explicitly calculating it. Link: http://lkml.kernel.org/r/03418373fd1e80030e7394b8e3e081c5de28a710.1549309756.git.tom.zanussi@linux.intel.com Cc: Joe Perches <joe@perches.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Add alternative synthetic event trace action syntaxTom Zanussi
Add a 'trace(synthetic_event_name, params)' alternative to synthetic_event_name(params). Currently, the syntax used for generating synthetic events is to invoke synthetic_event_name(params) i.e. use the synthetic event name as a function call. Users requested a new form that more explicitly shows that the synthetic event is in effect being traced. In this version, a new 'trace()' keyword is used, and the synthetic event name is passed in as the first argument. In addition, for the sake of consistency with other actions, change the documention to emphasize the trace() form over the function-call form, which remains documented as equivalent. Link: http://lkml.kernel.org/r/d082773e50232a001480cf837679a1e01c1a2eb7.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Add hist trigger onchange() handlerTom Zanussi
Add support for a hist:onchange($var) handler, similar to the onmax() handler but triggering whenever there's any change in $var, not just a max. Link: http://lkml.kernel.org/r/dfbc7e4ada242603e9ec3f049b5ad076a07dfd03.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Add hist trigger snapshot() actionTom Zanussi
Add support for hist:handlerXXX($var).snapshot(), which will take a snapshot of the current trace buffer whenever handlerXXX is hit. As a first user, this also adds snapshot() action support for the onmax() handler i.e. hist:onmax($var).snapshot(). Also, the hist trigger key printing is moved into a separate function so the snapshot() action can print a histogram key outside the histogram display - add and use hist_trigger_print_key() for that purpose. Link: http://lkml.kernel.org/r/2f1a952c0dcd8aca8702ce81269581a692396d45.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Generalize hist trigger onmax and save actionTom Zanussi
The action refactor code allowed actions and handlers to be separated, but the existing onmax handler and save action code is still not flexible enough to handle arbitrary coupling. This change generalizes them and in the process makes additional handlers and actions easier to implement. The onmax action can be broken up and thought of as two separate components - a variable to be tracked (the parameter given to the onmax($var_to_track) function) and an invisible variable created to save the ongoing result of doing something with that variable, such as saving the max value of that variable so far seen. Separating it out like this and renaming it appropriately allows us to use the same code for similar tracking functions such as onchange($var_to_track), which would just track the last value seen rather than the max seen so far, which is useful in some situations. Additionally, because different handlers and actions may want to save and access data differently e.g. save and retrieve tracking values as local variables vs something more global, save_val() and get_val() interface functions are introduced and max-specific implementations are used instead. The same goes for the code that checks whether a maximum has been hit - a generic check_val() interface and max-checking implementation is used instead, which allows future patches to make use of he same code using their own implemetations of similar functionality. Link: http://lkml.kernel.org/r/980ea73dd8e3f36db3d646f99652f8fed42b77d4.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Split up onmatch action dataTom Zanussi
Currently, the onmatch action data binds the onmatch action to data related to synthetic event generation. Since we want to allow the onmatch handler to potentially invoke a different action, and because we expect other handlers to generate synthetic events, we need to separate the data related to these two functions. Also rename the onmatch data to something more descriptive, and create and use common action data destroy function. Link: http://lkml.kernel.org/r/b9abbf9aae69fe3920cdc8ddbcaad544dd258d78.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-20tracing: Refactor hist trigger action codeTom Zanussi
The hist trigger action code currently implements two essentially hard-coded pairs of 'actions' - onmax(), which tracks a variable and saves some event fields when a max is hit, and onmatch(), which is hard-coded to generate a synthetic event. These hardcoded pairs (track max/save fields and detect match/generate synthetic event) should really be decoupled into separate components that can then be arbitrarily combined. The first component of each pair (track max/detect match) is called a 'handler' in the new code, while the second component (save fields/generate synthetic event) is called an 'action' in this scheme. This change refactors the action code to reflect this split by adding two handlers, HANDLER_ONMATCH and HANDLER_ONMAX, along with two actions, ACTION_SAVE and ACTION_TRACE. The new code combines them to produce the existing ONMATCH/TRACE and ONMAX/SAVE functionality, but doesn't implement the other combinations now possible. Future patches will expand these to further useful cases, such as ONMAX/TRACE, as well as add additional handlers and actions such as ONCHANGE and SNAPSHOT. Also, add abbreviated documentation for handlers and actions to README. Link: http://lkml.kernel.org/r/98bfdd48c1b4ff29fc5766442f99f5bc3c34b76b.1550100284.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Have the historgram use the result of str_has_prefix() for len of ↵Steven Rostedt (VMware)
prefix As str_has_prefix() returns the length on match, we can use that for the updating of the string pointer instead of recalculating the prefix size. Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Use str_has_prefix() instead of using fixed sizesSteven Rostedt (VMware)
There are several instances of strncmp(str, "const", 123), where 123 is the strlen of the const string to check if "const" is the prefix of str. But this can be error prone. Use str_has_prefix() instead. Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Use str_has_prefix() helper for histogram codeSteven Rostedt (VMware)
The tracing histogram code contains a lot of instances of the construct: strncmp(str, "const", sizeof("const") - 1) This can be prone to bugs due to typos or bad cut and paste. Use the str_has_prefix() helper macro instead that removes the need for having two copies of the constant string. Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Add hist trigger comments for variable-related fieldsTom Zanussi
Add a few comments to help clarify how variable and variable reference fields are used in the code. Link: http://lkml.kernel.org/r/ea857ce948531d7bec712bbb0f38360aa1d378ec.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Remove hist trigger synth_var_refsTom Zanussi
All var_refs are now handled uniformly and there's no reason to treat the synth_refs in a special way now, so remove them and associated functions. Link: http://lkml.kernel.org/r/b4d3470526b8f0426dcec125399dad9ad9b8589d.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Use hist trigger's var_ref array to destroy var_refsTom Zanussi
Since every var ref for a trigger has an entry in the var_ref[] array, use that to destroy the var_refs, instead of piecemeal via the field expressions. This allows us to avoid having to keep and treat differently separate lists for the action-related references, which future patches will remove. Link: http://lkml.kernel.org/r/fad1a164f0e257c158e70d6eadbf6c586e04b2a2.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Remove open-coding of hist trigger var_ref managementTom Zanussi
Have create_var_ref() manage the hist trigger's var_ref list, rather than having similar code doing it in multiple places. This cleans up the code and makes sure var_refs are always accounted properly. Also, document the var_ref-related functions to make what their purpose clearer. Link: http://lkml.kernel.org/r/05ddae93ff514e66fc03897d6665231892939913.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Use var_refs[] for hist trigger reference checkingTom Zanussi
Since all the variable reference hist_fields are collected into hist_data->var_refs[] array, there's no need to go through all the fields looking for them, or in separate arrays like synth_var_refs[], which will be going away soon anyway. This also allows us to get rid of some unnecessary code and functions currently used for the same purpose. Link: http://lkml.kernel.org/r/1545246556.4239.7.camel@gmail.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Change strlen to sizeof for hist trigger static stringsTom Zanussi
There's no need to use strlen() for static strings when the length is already known, so update trace_events_hist.c with sizeof() for those cases. Link: http://lkml.kernel.org/r/e3e754f2bd18e56eaa8baf79bee619316ebf4cfc.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22tracing: Remove unnecessary hist trigger struct fieldTom Zanussi
hist_field.var_idx is completely unused, so remove it. Link: http://lkml.kernel.org/r/d4e066c0f509f5f13ad3babc8c33ca6e7ddc439a.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10tracing: Consolidate trace_add/remove_event_call back to the nolock functionsSteven Rostedt (VMware)
The trace_add/remove_event_call_nolock() functions were added to allow the tace_add/remove_event_call() code be called when the event_mutex lock was already taken. Now that all callers are done within the event_mutex, there's no reason to have two different interfaces. Remove the current wrapper trace_add/remove_event_call()s and rename the _nolock versions back to the original names. Link: http://lkml.kernel.org/r/154140866955.17322.2081425494660638846.stgit@devbox Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-08tracing: Remove unneeded synth_event_mutexMasami Hiramatsu
Rmove unneeded synth_event_mutex. This mutex protects the reference count in synth_event, however, those operational points are already protected by event_mutex. 1. In __create_synth_event() and create_or_delete_synth_event(), those synth_event_mutex clearly obtained right after event_mutex. 2. event_hist_trigger_func() is trigger_hist_cmd.func() which is called by trigger_process_regex(), which is a part of event_trigger_regex_write() and this function takes event_mutex. 3. hist_unreg_all() is trigger_hist_cmd.unreg_all() which is called by event_trigger_regex_open() and it takes event_mutex. 4. onmatch_destroy() and onmatch_create() have long call tree, but both are finally invoked from event_trigger_regex_write() and event_trace_del_tracer(), former takes event_mutex, and latter ensures called under event_mutex locked. Finally, I ensured there is no resource conflict. For safety, I added lockdep_assert_held(&event_mutex) for each function. Link: http://lkml.kernel.org/r/154140864134.17322.4796059721306031894.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-08tracing: Use dyn_event framework for synthetic eventsMasami Hiramatsu
Use dyn_event framework for synthetic events. This shows synthetic events on "tracing/dynamic_events" file in addition to tracing/synthetic_events interface. User can also define new events via tracing/dynamic_events with "s:" prefix. So, the new syntax is below; s:[synthetic/]EVENT_NAME TYPE ARG; [TYPE ARG;]... To remove events via tracing/dynamic_events, you can use "-:" prefix as same as other events. Link: http://lkml.kernel.org/r/154140861301.17322.15454611233735614508.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-08tracing: Simplify creation and deletion of synthetic eventsMasami Hiramatsu
Since the event_mutex and synth_event_mutex ordering issue is gone, we can skip existing event check when adding or deleting events, and some redundant code in error path. This changes release_all_synth_events() to abort the process when it hits any error and returns the error code. It succeeds only if it has no error. Link: http://lkml.kernel.org/r/154140847194.17322.17960275728005067803.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-08tracing: Lock event_mutex before synth_event_mutexMasami Hiramatsu
synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-10-28tracing: Return -ENOENT if there is no target synthetic eventMasami Hiramatsu
Return -ENOENT error if there is no target synthetic event. This notices an operation failure to user as below; # echo 'wakeup_latency u64 lat; pid_t pid;' > synthetic_events # echo '!wakeup' >> synthetic_events sh: write error: No such file or directory Link: http://lkml.kernel.org/r/154013449986.25576.9487131386597290172.stgit@devbox Acked-by: Tom Zanussi <zanussi@linux.intel.com> Tested-by: Tom Zanussi <zanussi@linux.intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Cc: stable@vger.kernel.org Fixes: 4b147936fa50 ('tracing: Add support for 'synthetic' events') Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-10-19tracing: Fix synthetic event to allow semicolon at endMasami Hiramatsu
Fix synthetic event to allow independent semicolon at end. The synthetic_events interface accepts a semicolon after the last word if there is no space. # echo "myevent u64 var;" >> synthetic_events But if there is a space, it returns an error. # echo "myevent u64 var ;" > synthetic_events sh: write error: Invalid argument This behavior is difficult for users to understand. Let's allow the last independent semicolon too. Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: stable@vger.kernel.org Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-10-19tracing: Fix synthetic event to accept unsigned modifierMasami Hiramatsu
Fix synthetic event to accept unsigned modifier for its field type correctly. Currently, synthetic_events interface returns error for "unsigned" modifiers as below; # echo "myevent unsigned long var" >> synthetic_events sh: write error: Invalid argument This is because argv_split() breaks "unsigned long" into "unsigned" and "long", but parse_synth_field() doesn't expected it. With this fix, synthetic_events can handle the "unsigned long" correctly like as below; # echo "myevent unsigned long var" >> synthetic_events # cat synthetic_events myevent unsigned long var Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: stable@vger.kernel.org Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-16tracing: Add SPDX License format tags to tracing filesSteven Rostedt (VMware)
Add the SPDX License header to ease license compliance management. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-10tracing: Fix synchronizing to event changes with ↵Steven Rostedt (VMware)
tracepoint_synchronize_unregister() Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu), we need to make sure all locations that depend on this are also protected. There were many places that did a synchronize_sched() thinking that it was enough to protect againts access to trace events. This use to be the case, but now that we use SRCU for _rcuidle() trace events, they may not be protected by synchronize_sched(), as they may be called in paths that RCU is not watching for preempt disable. Fixes: e6753f23d961d ("tracepoint: Make rcuidle tracepoint callers use SRCU") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Avoid string overflowArnd Bergmann
'err' is used as a NUL-terminated string, but using strncpy() with the length equal to the buffer size may result in lack of the termination: kernel/trace/trace_events_hist.c: In function 'hist_err_event': kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation] strncpy(err, var, MAX_FILTER_STR_VAL); This changes it to use the safer strscpy() instead. Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de Cc: stable@vger.kernel.org Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-29tracing: Allow histogram triggers to access ftrace internal eventsSteven Rostedt (VMware)
Now that trace_marker can have triggers, including a histogram triggers, the onmatch() and onmax() access the trace event. To do so, the search routine to find the event file needs to use the raw __find_event_file() that does not filter out ftrace events. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-26tracing: Add field modifier parsing hist error for hist triggersTom Zanussi
If the user specifies an invalid field modifier for a hist trigger, the current code correctly flags that as an error, but doesn't tell the user what happened. Fix this by invoking hist_err() with an appropriate message when invalid modifiers are specified. Before: # echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger -su: echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist After: # echo 'hist:keys=pid:ts0=common_timestamp.junkusecs' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger -su: echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/hist ERROR: Invalid field modifier: junkusecs Last command: keys=pid:ts0=common_timestamp.junkusecs Link: http://lkml.kernel.org/r/b043c59fa79acd06a5f14a1d44dee9e5a3cd1248.1524790601.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-26tracing: Add field parsing hist error for hist triggersTom Zanussi
If the user specifies a nonexistent field for a hist trigger, the current code correctly flags that as an error, but doesn't tell the user what happened. Fix this by invoking hist_err() with an appropriate message when nonexistent fields are specified. Before: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist After: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: Invalid argument # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist ERROR: Couldn't find field: pid Last command: keys=pid:ts0=common_timestamp.usecs Link: http://lkml.kernel.org/r/fdc8746969d16906120f162b99dd71c741e0b62c.1524790601.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-26tracing: Restore proper field flag printing when displaying triggersTom Zanussi
The flag-printing code used when displaying hist triggers somehow got dropped during refactoring of the inter-event patchset. This restores it. Below are a couple examples - in the first case, .usecs wasn't being displayed properly for common_timestamps and the second illustrates the same for other flags such as .execname. Before: # echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger hist:keys=common_pid:vals=hitcount,count:sort=count:size=2048 [active] # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active] After: # echo 'hist:key=common_pid.execname:val=count:sort=count' > /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger # cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_read/trigger hist:keys=common_pid.execname:vals=hitcount,count:sort=count:size=2048 [active] # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global if comm=="cyclictest" [active] Link: http://lkml.kernel.org/r/492bab42ff21806600af98a8ea901af10efbee0c.1524790601.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06tracing: Uninitialized variable in create_tracing_map_fields()Dan Carpenter
Smatch complains that idx can be used uninitialized when we check if (idx < 0). It has to be the first iteration through the loop and the HIST_FIELD_FL_STACKTRACE bit has to be clear and the HIST_FIELD_FL_VAR bit has to be set to reach the bug. Link: http://lkml.kernel.org/r/20180328114815.GC29050@mwanda Fixes: 30350d65ac56 ("tracing: Add variable support to hist triggers") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06tracing: Make sure variable string fields are NULL-terminatedTom Zanussi
The strncpy() currently being used for variable string fields can result in a lack of termination if the string length is equal to the field size. Use the safer strscpy() instead, which will guarantee termination. Link: http://lkml.kernel.org/r/fb97c1e518fb358c12a4057d7445ba2c46956cd7.1522256721.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06tracing: Add action comparisons when testing matching hist triggersTom Zanussi
Actions also need to be considered when checking for matching triggers - triggers differing only by action should be allowed, but currently aren't because the matching check ignores the action and erroneously returns -EEXIST. Add and call an actions_match() function to address that. Here's an example using onmatch() actions. The first -EEXIST shouldn't occur because the onmatch() is different in the second wakeup_latency() param. The second -EEXIST shouldn't occur because it's a different action (in this case, it doesn't have an action, so shouldn't be seen as being the same and therefore rejected). In the after case, both are correctly accepted (and trying to add one of them again returns -EEXIST as it should). before: # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: File exists # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger -su: echo: write error: File exists after: # echo 'wakeup_latency u64 lat; pid_t pid' >> /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0 if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,next_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger Link: http://lkml.kernel.org/r/a7fd668b87ec10736c8f016ac4279c8480d50c2b.1522256721.git.tom.zanussi@linux.intel.com Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06tracing: Don't add flag strings when displaying variable referencesTom Zanussi
Variable references should never have flags appended when displayed - prevent that from happening. Before: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:... After: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:... Link: http://lkml.kernel.org/r/913318a5610ef6b24af2522575f671fa6ee19b6b.1522256721.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-06tracing: Fix display of hist trigger expressions containing timestampsTom Zanussi
When displaying hist triggers, variable references that have the timestamp field flag set are erroneously displayed as common_timestamp rather than the variable reference. Additionally, timestamp expressions are displayed in the same way. Fix this by forcing the timestamp flag handling to follow variable reference and expression handling. Before: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs:... After: # cat /sys/kernel/debug/tracing/events/sched/sched_switch/trigger hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0.usecs:... Link: http://lkml.kernel.org/r/92746b06be67499c2a6217bd55395b350ad18fad.1522256721.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 09:59:55 +0000