summaryrefslogtreecommitdiff
path: root/kernel/time
AgeCommit message (Collapse)Author
2019-09-05alarmtimer: Use EOPNOTSUPP instead of ENOTSUPPThadeu Lima de Souza Cascardo
ENOTSUPP is not supposed to be returned to userspace. This was found on an OpenPower machine, where the RTC does not support set_alarm. On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in "524 Unknown error 524" Replace it with EOPNOTSUPP which results in the expected "95 Operation not supported" error. Fixes: 1c6b39ad3f01 (alarmtimers: Return -ENOTSUPP if no RTC device is present) Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.com
2019-08-23timekeeping/vsyscall: Prevent math overflow in BOOTTIME updateThomas Gleixner
The VDSO update for CLOCK_BOOTTIME has a overflow issue as it shifts the nanoseconds based boot time offset left by the clocksource shift. That overflows once the boot time offset becomes large enough. As a consequence CLOCK_BOOTTIME in the VDSO becomes a random number causing applications to misbehave. Fix it by storing a timespec64 representation of the offset when boot time is adjusted and add that to the MONOTONIC base time value in the vdso data page. Using the timespec64 representation avoids a 64bit division in the update code. Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908221257580.1983@nanos.tec.linutronix.de
2019-07-10timekeeping/vsyscall: Use __iter_div_u64_rem()Arnd Bergmann
On 32-bit x86 when building with clang-9, the 'division' loop gets turned back into an inefficient division that causes a link error: kernel/time/vsyscall.o: In function `update_vsyscall': vsyscall.c:(.text+0xe3): undefined reference to `__udivdi3' Use the existing __iter_div_u64_rem() function which is used to address the same issue in other places. Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lkml.kernel.org/r/20190710130206.1670830-1-arnd@arndb.de
2019-07-08Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Remove the unused per rq load array and all its infrastructure, by Dietmar Eggemann. - Add utilization clamping support by Patrick Bellasi. This is a refinement of the energy aware scheduling framework with support for boosting of interactive and capping of background workloads: to make sure critical GUI threads get maximum frequency ASAP, and to make sure background processing doesn't unnecessarily move to cpufreq governor to higher frequencies and less energy efficient CPU modes. - Add the bare minimum of tracepoints required for LISA EAS regression testing, by Qais Yousef - which allows automated testing of various power management features, including energy aware scheduling. - Restructure the former tsk_nr_cpus_allowed() facility that the -rt kernel used to modify the scheduler's CPU affinity logic such as migrate_disable() - introduce the task->cpus_ptr value instead of taking the address of &task->cpus_allowed directly - by Sebastian Andrzej Siewior. - Misc optimizations, fixes, cleanups and small enhancements - see the Git log for details. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) sched/uclamp: Add uclamp support to energy_compute() sched/uclamp: Add uclamp_util_with() sched/cpufreq, sched/uclamp: Add clamps for FAIR and RT tasks sched/uclamp: Set default clamps for RT tasks sched/uclamp: Reset uclamp values on RESET_ON_FORK sched/uclamp: Extend sched_setattr() to support utilization clamping sched/core: Allow sched_setattr() to use the current policy sched/uclamp: Add system default clamps sched/uclamp: Enforce last task's UCLAMP_MAX sched/uclamp: Add bucket local max tracking sched/uclamp: Add CPU's clamp buckets refcounting sched/fair: Rename weighted_cpuload() to cpu_runnable_load() sched/debug: Export the newly added tracepoints sched/debug: Add sched_overutilized tracepoint sched/debug: Add new tracepoint to track PELT at se level sched/debug: Add new tracepoints to track PELT at rq level sched/debug: Add a new sched_trace_*() helper functions sched/autogroup: Make autogroup_path() always available sched/wait: Deduplicate code with do-while sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity() ...
2019-07-07time: Validate user input in compat_settimeofday()zhengbin
The user value is validated after converting the timeval to a timespec, but for a wide range of negative tv_usec values the multiplication overflow turns them in positive numbers. So the 'validated later' is not catching the invalid input. Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562460701-113301-1-git-send-email-zhengbin13@huawei.com
2019-07-03Merge branch 'timers/vdso' into timers/coreThomas Gleixner
so the hyper-v clocksource update can be applied.
2019-06-27hrtimer: Use a bullet for the returns bullet listMauro Carvalho Chehab
That gets rid of this warning: ./kernel/time/hrtimer.c:1119: WARNING: Block quote ends without a blank line; unexpected unindent. and displays nicely both at the source code and at the produced documentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linux Doc Mailing List <linux-doc@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lkml.kernel.org/r/74ddad7dac331b4e5ce4a90e15c8a49e3a16d2ac.1561372382.git.mchehab+samsung@kernel.org
2019-06-23timer_list: Guard procfs specific codeNathan Huckleberry
With CONFIG_PROC_FS=n the following warning is emitted: kernel/time/timer_list.c:361:36: warning: unused variable 'timer_list_sops' [-Wunused-const-variable] static const struct seq_operations timer_list_sops = { Add #ifdef guard around procfs specific code. Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/534 Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
2019-06-22timekeeping: Provide a generic update_vsyscall() implementationVincenzo Frascino
The new generic VDSO library allows to unify the update_vsyscall[_tz]() implementations. Provide a generic implementation based on the x86 code and the bindings which need to be implemented in architecture specific code. [ tglx: Moved it into kernel/time where it belongs. Removed the pointless line breaks in the stub functions. Massaged changelog ] Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shijith Thotton <sthotton@marvell.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Huw Davies <huw@codeweavers.com> Link: https://lkml.kernel.org/r/20190621095252.32307-4-vincenzo.frascino@arm.com
2019-06-22posix-timers: Use spin_lock_irq() in itimer_delete()Sebastian Andrzej Siewior
itimer_delete() uses spin_lock_irqsave() to obtain a `flags' variable which can then be passed to unlock_timer(). It uses already spin_lock locking for the structure instead of lock_timer() because it has a timer which can not be removed by others at this point. The cleanup is always performed with enabled interrupts. Use spin_lock_irq() / spin_unlock_irq() so the `flags' variable can be removed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190621143643.25649-3-bigeasy@linutronix.de
2019-06-22posix-timers: Remove "it_signal = NULL" assignment in itimer_delete()Sebastian Andrzej Siewior
itimer_delete() is invoked during do_exit(). At this point it is the last thread in the group dying and doing the clean up. Since it is the last thread in the group, there can not be any other task attempting to lock the itimer which means the NULL assignment (which avoids lookups in __lock_timer()) is not required. The assignment and comment was copied in commit 0e568881178ff ("[PATCH] fix posix-timers to have proper per-process scope") from sys_timer_delete() which was/is the syscall interface and requires the assignment. Remove the superfluous ->it_signal = NULL assignment. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190621143643.25649-2-bigeasy@linutronix.de
2019-06-22timekeeping: Use proper ktime_add when adding nsecs in coarse offsetJason A. Donenfeld
While this doesn't actually amount to a real difference, since the macro evaluates to the same thing, every place else operates on ktime_t using these functions, so let's not break the pattern. Fixes: e3ff9c3678b4 ("timekeeping: Repair ktime_get_coarse*() granularity") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-1-Jason@zx2c4.com
2019-06-22Merge branch 'linus' into timers/coreThomas Gleixner
Pick up upstream fixes for pending changes.
2019-06-22ntp: Limit TAI-UTC offsetMiroslav Lichvar
Don't allow the TAI-UTC offset of the system clock to be set by adjtimex() to a value larger than 100000 seconds. This prevents an overflow in the conversion to int, prevents the CLOCK_TAI clock from getting too far ahead of the CLOCK_REALTIME clock, and it is still large enough to allow leap seconds to be inserted at the maximum rate currently supported by the kernel (once per day) for the next ~270 years, however unlikely it is that someone can survive a catastrophic event which slowed down the rotation of the Earth so much. Reported-by: Weikang shi <swkhack@gmail.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
2019-06-17Merge tag 'v5.2-rc5' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-14alarmtimer: Fix kerneldoc comment for alarmtimer_suspend()Yangtao Li
This brings the kernel doc in line with the function signature. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Link: https://lkml.kernel.org/r/20190525183925.18963-1-tiny.windzz@gmail.com
2019-06-14clocksource: Move inline keyword to the beginning of function declarationsMathieu Malaterre
The inline keyword was not at the beginning of the function declarations. Fix the following warnings triggered when using W=1: kernel/time/clocksource.c:108:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration] kernel/time/clocksource.c:113:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: trivial@kernel.org Cc: kernel-janitors@vger.kernel.org Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190524103339.28787-1-malat@debian.org
2019-06-14timekeeping: Repair ktime_get_coarse*() granularityThomas Gleixner
Jason reported that the coarse ktime based time getters advance only once per second and not once per tick as advertised. The code reads only the monotonic base time, which advances once per second. The nanoseconds are accumulated on every tick in xtime_nsec up to a second and the regular time getters take this nanoseconds offset into account, but the ktime_get_coarse*() implementation fails to do so. Add the accumulated xtime_nsec value to the monotonic base time to get the proper per tick advancing coarse tinme. Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
2019-06-12hrtimer: Remove unused header includeYangtao Li
seq_file.h does not need to be included, so remove it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190607174253.27403-1-tiny.windzz@gmail.com
2019-06-03sched/fair: Remove the rq->cpu_load[] update codeDietmar Eggemann
With LB_BIAS disabled, there is no need to update the rq->cpu_load[idx] any more. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@surriel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20190527062116.11512-2-dietmar.eggemann@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time fixes from Ingo Molnar: "A TIA adjtimex interface extension, and a POSIX compliance ABI fix for timespec64 users" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Allow TAI-UTC offset to be set to zero y2038: Make CONFIG_64BIT_TIME unconditional
2019-05-09ntp: Allow TAI-UTC offset to be set to zeroMiroslav Lichvar
The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock. It is typically set by NTP/PTP implementations and it is automatically updated by the kernel on leap seconds. The initial value is zero (which applications may interpret as unknown), but this value cannot be set by adjtimex. This limitation seems to go back to the original "nanokernel" implementation by David Mills. Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in order to allow setting it back to the initial value. Fixes: 153b5d054ac2 ("ntp: support for TAI") Suggested-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-06Merge tag 'pm-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB) handling and expose it to user space via sysfs, fix and clean up several cpufreq drivers, add support for two new chips to the qoriq cpufreq driver, fix, simplify and clean up the cpufreq core and the schedutil governor, add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature, fix the exynos cpuidle driver and fix a couple of issues in the devfreq subsystem and clean it up. Specifics: - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel processors and expose it to user space via sysfs to avoid having to access it through the generic MSR I/F (Rafael Wysocki). - Improve the handling of global turbo changes made by the platform firmware in the intel_pstate driver (Rafael Wysocki). - Convert some slow-path static_cpu_has() callers to boot_cpu_has() in cpufreq (Borislav Petkov). - Fix the frequency calculation loop in the armada-37xx cpufreq driver (Gregory CLEMENT). - Fix possible object reference leaks in multuple cpufreq drivers (Wen Yang). - Fix kerneldoc comment in the centrino cpufreq driver (dongjian). - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan Kumar). - Add support for lx2160a and ls1028a to the qoriq cpufreq driver (Vabhav Sharma, Yuantian Tang). - Fix kobject memory leak in the cpufreq core (Viresh Kumar). - Simplify the IOwait boosting in the schedutil cpufreq governor and rework the TSC cpufreq notifier on x86 (Rafael Wysocki). - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin). - Improve the cpufreq documentation, add SPDX license tags to some PM documentation files and unify copyright notices in them (Rafael Wysocki). - Add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature (Ulf Hansson). - Rearrange the PSCI firmware support code and add support for SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla). - Improve genpd support for devices in multiple power domains (Ulf Hansson). - Unify target residency for the AFTR and coupled AFTR states in the exynos cpuidle driver (Marek Szyprowski). - Introduce new helper routine in the operating performance points (OPP) framework (Andrew-sh.Cheng). - Add support for passing on-die termination (ODT) and auto power down parameters from the kernel to Trusted Firmware-A (TF-A) to the rk3399_dmc devfreq driver (Enric Balletbo i Serra). - Add tracing to devfreq (Lukasz Luba). - Make the exynos-bus devfreq driver suspend all devices on system shutdown (Marek Szyprowski). - Fix a few minor issues in the devfreq subsystem and clean it up somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring, Saravana Kannan, Yangtao Li). - Improve system wakeup diagnostics (Stephen Boyd). - Rework filesystem sync messages emitted during system suspend and hibernation (Harry Pan)" * tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: Fix kobject memleak cpufreq: armada-37xx: fix frequency calculation for opp cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment cpufreq: qoriq: add support for lx2160a x86: tsc: Rework time_cpufreq_notifier() PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name() PM / Domains: Search for the CPU device outside the genpd lock PM / Domains: Drop unused in-parameter to some genpd functions PM / Domains: Use the base device for driver_deferred_probe_check_state() cpufreq: qoriq: Add ls1028a chip support PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev() PM / Domains: Don't kfree() the virtual device in the error path cpufreq: Move ->get callback check outside of __cpufreq_get() PM / Domains: remove unnecessary unlikely() cpufreq: Remove needless bios_limit check in show_bios_limit() drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning firmware/psci: add support for SYSTEM_RESET2 PM / devfreq: add tracing for scheduling work trace: events: add devfreq trace event file ...
2019-05-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-06Merge branches 'pm-cpuidle' and 'pm-sleep'Rafael J. Wysocki
* pm-cpuidle: PM / Domains: Add genpd governor for CPUs cpuidle: Export the next timer expiration for CPUs PM / Domains: Add support for CPU devices to genpd PM / Domains: Add generic data pointer to struct genpd_power_state cpuidle: exynos: Unify target residency for AFTR and coupled AFTR states * pm-sleep: PM / core: Propagate dev->power.wakeup_path when no callbacks PM / core: Introduce dpm_async_fn() helper PM / core: fix kerneldoc comment for device_pm_wait_for_dev() PM / core: fix kerneldoc comment for dpm_watchdog_handler() PM / sleep: Measure the time of filesystems syncing PM / sleep: Refactor filesystems sync to reduce duplication PM / wakeup: Use pm_pr_dbg() instead of pr_debug()
2019-05-03nohz_full: Allow the boot CPU to be nohz_fullNicholas Piggin
Allow the boot CPU/CPU0 to be nohz_full. Have the boot CPU take the do_timer duty during boot until a housekeeping CPU can take over. This is supported when CONFIG_PM_SLEEP_SMP is not configured, or when it is configured and the arch allows suspend on non-zero CPUs. nohz_full has been trialed at a large supercomputer site and found to significantly reduce jitter. In order to deploy it in production, they need CPU0 to be nohz_full because their job control system requires the application CPUs to start from 0, and the housekeeping CPUs are placed higher. An equivalent job scheduling that uses CPU0 for housekeeping could be achieved by modifying their system, but it is preferable if nohz_full can support their environment without modification. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-6-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-19tick: Fix typos in commentsLaurent Gauthier
Signed-off-by: Laurent Gauthier <laurent.gauthier@soccasys.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-18timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()Chang-An Chen
tick_freeze() introduced by suspend-to-idle in commit 124cf9117c5f ("PM / sleep: Make it possible to quiesce timers during suspend-to-idle") uses timekeeping_suspend() instead of syscore_suspend() during suspend-to-idle. As a consequence generic sched_clock will keep going because sched_clock_suspend() and sched_clock_resume() are not invoked during suspend-to-idle which can result in a generic sched_clock wrap. On a ARM system with suspend-to-idle enabled, sched_clock is registered as "56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns", which means the real wrapping duration is 8796093022202ns. [ 134.551779] suspend-to-idle suspend (timekeeping_suspend()) [ 1204.912239] suspend-to-idle resume (timekeeping_resume()) ...... [ 1206.912239] suspend-to-idle suspend (timekeeping_suspend()) [ 5880.502807] suspend-to-idle resume (timekeeping_resume()) ...... [ 6000.403724] suspend-to-idle suspend (timekeeping_suspend()) [ 8035.753167] suspend-to-idle resume (timekeeping_resume()) ...... [ 8795.786684] (2)[321:charger_thread]...... [ 8795.788387] (2)[321:charger_thread]...... [ 0.057226] (0)[0:swapper/0]...... [ 0.061447] (2)[0:swapper/2]...... sched_clock was not stopped during suspend-to-idle, and sched_clock_poll hrtimer was not expired because timekeeping_suspend() was invoked during suspend-to-idle. It makes sched_clock wrap at kernel time 8796s. To prevent this, invoke sched_clock_suspend() and sched_clock_resume() in tick_freeze() together with timekeeping_suspend() and timekeeping_resume(). Fixes: 124cf9117c5f (PM / sleep: Make it possible to quiesce timers during suspend-to-idle) Signed-off-by: Chang-An Chen <chang-an.chen@mediatek.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Kees Cook <keescook@chromium.org> Cc: Corey Minyard <cminyard@mvista.com> Cc: <linux-mediatek@lists.infradead.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: <kuohong.wang@mediatek.com> Cc: <freddy.hsin@mediatek.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1553828349-8914-1-git-send-email-chang-an.chen@mediatek.com
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15ntp: Audit NTP parameters adjustmentOndrej Mosnacek
Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-15timekeeping: Audit clock adjustmentsOndrej Mosnacek
Emit an audit record whenever the system clock is changed (i.e. shifted by a non-zero offset) by a syscall from userspace. The syscalls than can (at the time of writing) trigger such record are: - settimeofday(2), stime(2), clock_settime(2) -- via do_settimeofday64() - adjtimex(2), clock_adjtime(2) -- via do_adjtimex() The new records have type AUDIT_TIME_INJOFFSET and contain the following fields: - sec -- the 'seconds' part of the offset - nsec -- the 'nanoseconds' part of the offset Example record (time was shifted backwards by ~15.875 seconds): type=TIME_INJOFFSET msg=audit(1530616049.652:13): sec=-16 nsec=124887145 The records of this type will be associated with the corresponding syscall records. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> [PM: fixed a line width problem in __audit_tk_injoffset()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-10alarmtimer: Return correct remaining timeAndrei Vagin
To calculate a remaining time, it's required to subtract the current time from the expiration time. In alarm_timer_remaining() the arguments of ktime_sub are swapped. Fixes: d653d8457c76 ("alarmtimer: Implement remaining callback") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190408041542.26338-1-avagin@gmail.com
2019-04-10cpuidle: Export the next timer expiration for CPUsUlf Hansson
To be able to predict the sleep duration for a CPU entering idle, it is essential to know the expiration time of the next timer. Both the teo and the menu cpuidle governors already use this information for CPU idle state selection. Moving forward, a similar prediction needs to be made for a group of idle CPUs rather than for a single one and the following changes implement a new genpd governor for that purpose. In order to support that feature, add a new function called tick_nohz_get_next_hrtimer() that will return the next hrtimer expiration time of a given CPU to be invoked after deciding whether or not to stop the scheduler tick on that CPU. Make the cpuidle core call tick_nohz_get_next_hrtimer() right before invoking the ->enter() callback provided by the cpuidle driver for the given state and store its return value in the per-CPU struct cpuidle_device, so as to make it available to code outside of cpuidle. Note that at the point when cpuidle calls tick_nohz_get_next_hrtimer(), the governor's ->select() callback has already returned and indicated whether or not the tick should be stopped, so in fact the value returned by tick_nohz_get_next_hrtimer() always is the next hrtimer expiration time for the given CPU, possibly including the tick (if it hasn't been stopped). Co-developed-by: Lina Iyer <lina.iyer@linaro.org> Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-08time: Introduce jiffies64_to_msecs()Li RongQing
there is a similar helper in net/netfilter/nf_tables_api.c, this maybe become a common request someday, so move it to time.c Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-29tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline()Borislav Petkov
Randconfig builds with CONFIG_TICK_ONESHOT=y CONFIG_HOTPLUG_CPU=n trigger kernel/time/tick-broadcast.c:39:13: warning: ‘tick_broadcast_oneshot_offline’ \ declared ‘static’ but never defined [-Wunused-function] due to that function's definition missing. Move the CONFIG_HOTPLUG_CPU ifdeffery around its declaration too. Fixes: 1b72d4323798 ("tick: Remove outgoing CPU from broadcast masks") Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: x86@kernel.org Link: https://lkml.kernel.org/r/20190329110508.6621-1-bp@alien8.de
2019-03-28timekeeping: Force upper bound for setting CLOCK_REALTIMEThomas Gleixner
Several people reported testing failures after setting CLOCK_REALTIME close to the limits of the kernel internal representation in nanoseconds, i.e. year 2262. The failures are exposed in subsequent operations, i.e. when arming timers or when the advancing CLOCK_MONOTONIC makes the calculation of CLOCK_REALTIME overflow into negative space. Now people start to paper over the underlying problem by clamping calculations to the valid range, but that's just wrong because such workarounds will prevent detection of real issues as well. It is reasonable to force an upper bound for the various methods of setting CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum uptime of 30 years which is plenty enough even for esoteric embedded systems. That results in an upper bound of year 2232 for setting the time. Once that limit is reached in reality this limit is only a small part of the problem space. But until then this stops people from trying to paper over the problem at the wrong places. Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de
2019-03-24timer/trace: Improve timer tracingAnna-Maria Gleixner
Timers are added to the timer wheel off by one. This is required in case a timer is queued directly before incrementing jiffies to prevent early timer expiry. When reading a timer trace and relying only on the expiry time of the timer in the timer_start trace point and on the now in the timer_expiry_entry trace point, it seems that the timer fires late. With the current timer_expiry_entry trace point information only now=jiffies is printed but not the value of base->clk. This makes it impossible to draw a conclusion to the index of base->clk and makes it impossible to examine timer problems without additional trace points. Therefore add the base->clk value to the timer_expire_entry trace point, to be able to calculate the index the timer base is located at during collecting expired timers. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20190321120921.16463-5-anna-maria@linutronix.de
2019-03-24timer: Move trace point to get proper indexAnna-Maria Gleixner
When placing the timer_start trace point before the timer wheel bucket index is calculated, the index information in the trace point is useless. It is not possible to simply move the debug_activate() call after the index calculation, because debug_object_activate() needs to be called before touching the object. Therefore split debug_activate() and move the trace point into enqueue_timer() after the new index has been calculated. The debug_object_activate() call remains at the original place. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lkml.kernel.org/r/20190321120921.16463-3-anna-maria@linutronix.de
2019-03-24tick/sched: Update tick_sched struct documentationAnna-Maria Gleixner
Adapt the documentation order of struct members to the effective order of struct members and add missing descriptions. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Link: https://lkml.kernel.org/r/20190321120921.16463-2-anna-maria@linutronix.de
2019-03-23tick: Remove outgoing CPU from broadcast masksThomas Gleixner
Valentin reported that unplugging a CPU occasionally results in a warning in the tick broadcast code which is triggered when an offline CPU is in the broadcast mask. This happens because the outgoing CPU is not removing itself from the broadcast masks, especially not from the broadcast_force_mask. The removal happens on the control CPU after the outgoing CPU is dead. It's a long standing issue, but the warning is harmless. Rework the hotplug mechanism so that the outgoing CPU removes itself from the broadcast masks after disabling interrupts and removing itself from the online mask. Reported-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903211540180.1784@nanos.tec.linutronix.de
2019-03-23timekeeping: Consistently use unsigned int for seqcount snapshotRasmus Villemoes
The timekeeping code uses a random mix of "unsigned long" and "unsigned int" for the seqcount snapshots (ratio 14:12). Since the seqlock.h API is entirely based on unsigned int, use that throughout. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190318195557.20773-1-linux@rasmusvillemoes.dk
2019-03-22time/jiffies: Make refined_jiffies staticValdis Kletnieks
sparse complains: CHECK kernel/time/jiffies.c kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not declared. Should it be static? Its only used in file scope. Make it static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/32342.1552379915@turing-police
2019-03-05Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main RCU related changes in this cycle were: - Additional cleanups after RCU flavor consolidation - Grace-period forward-progress cleanups and improvements - Documentation updates - Miscellaneous fixes - spin_is_locked() conversions to lockdep - SPDX changes to RCU source and header files - SRCU updates - Torture-test updates, including nolibc updates and moving nolibc to tools/include" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) locking/locktorture: Convert to SPDX license identifier linux/torture: Convert to SPDX license identifier torture: Convert to SPDX license identifier linux/srcu: Convert to SPDX license identifier linux/rcutree: Convert to SPDX license identifier linux/rcutiny: Convert to SPDX license identifier linux/rcu_sync: Convert to SPDX license identifier linux/rcu_segcblist: Convert to SPDX license identifier linux/rcupdate: Convert to SPDX license identifier linux/rcu_node_tree: Convert to SPDX license identifier rcu/update: Convert to SPDX license identifier rcu/tree: Convert to SPDX license identifier rcu/tiny: Convert to SPDX license identifier rcu/sync: Convert to SPDX license identifier rcu/srcu: Convert to SPDX license identifier rcu/rcutorture: Convert to SPDX license identifier rcu/rcu_segcblist: Convert to SPDX license identifier rcu/rcuperf: Convert to SPDX license identifier rcu/rcu.h: Convert to SPDX license identifier RCU/torture.txt: Remove section MODULE PARAMETERS ...
2019-03-05Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:44:01 +0000