| Age | Commit message (Collapse) | Author |
|---|
|
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
hrtimer does not seem to use any of kallsyms functions/defines.
Link: http://lkml.kernel.org/r/20171208025616.16267-9-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement frequency/CPU invariance and OPP selection for
SCHED_DEADLINE (Juri Lelli)
- Tweak the task migration logic for better multi-tasking
workload scalability (Mel Gorman)
- Misc cleanups, fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Make bandwidth enforcement scale-invariant
sched/cpufreq: Move arch_scale_{freq,cpu}_capacity() outside of #ifdef CONFIG_SMP
sched/cpufreq: Remove arch_scale_freq_capacity()'s 'sd' parameter
sched/cpufreq: Always consider all CPUs when deciding next freq
sched/cpufreq: Split utilization signals
sched/cpufreq: Change the worker kthread to SCHED_DEADLINE
sched/deadline: Move CPU frequency selection triggering points
sched/cpufreq: Use the DEADLINE utilization signal
sched/deadline: Implement "runtime overrun signal" support
sched/fair: Only immediately migrate tasks due to interrupts if prev and target CPUs share cache
sched/fair: Correct obsolete comment about cpufreq_update_util()
sched/fair: Remove impossible condition from find_idlest_group_cpu()
sched/cpufreq: Don't pass flags to sugov_set_iowait_boost()
sched/cpufreq: Initialize sg_cpu->flags to 0
sched/fair: Consider RT/IRQ pressure in capacity_spare_wake()
sched/fair: Use 'unsigned long' for utilization, consistently
sched/core: Rework and clarify prepare_lock_switch()
sched/fair: Remove unused 'curr' parameter from wakeup_gran
sched/headers: Constify object_is_on_stack()
|
|
Pick up urgent bug fix and resolve the conflict.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
|
|
The function clear_siginfo is just a nice wrapper around memset so
this results in no functional change. This change makes mistakes
a little more difficult and it makes it clearer what is going on.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
All prerequisites to handle hrtimers for expiry in either hard or soft
interrupt context are in place.
Add the missing bit in hrtimer_init() which associates the timer to the
hard or the softirq clock base.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-30-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer callbacks are always invoked in hard interrupt context. Several
users in tree require soft interrupt context for their callbacks and
achieve this by combining a hrtimer with a tasklet. The hrtimer schedules
the tasklet in hard interrupt context and the tasklet callback gets invoked
in softirq context later.
That's suboptimal and aside of that the real-time patch moves most of the
hrtimers into softirq context. So adding native support for hrtimers
expiring in softirq context is a valuable extension for both mainline and
the RT patch set.
Each valid hrtimer clock id has two associated hrtimer clock bases: one for
timers expiring in hardirq context and one for timers expiring in softirq
context.
Implement the functionality to associate a hrtimer with the hard or softirq
related clock bases and update the relevant functions to take them into
account when the next expiry time needs to be evaluated.
Add a check into the hard interrupt context handler functions to check
whether the first expiring softirq based timer has expired. If it's expired
the softirq is raised and the accounting of softirq based timers to
evaluate the next expiry time for programming the timer hardware is skipped
until the softirq processing has finished. At the end of the softirq
processing the regular processing is resumed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-29-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The softirq based hrtimer can utilize most of the existing hrtimers
functions, but need to operate on a different data set.
Add an 'active_mask' parameter to various functions so the hard and soft bases
can be selected. Fixup the existing callers and hand in the ACTIVE_HARD
mask.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-28-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently hrtimer callback functions are always executed in hard interrupt
context. Users of hrtimers, which need their timer function to be executed
in soft interrupt context, make use of tasklets to get the proper context.
Add additional hrtimer clock bases for timers which must expire in softirq
context, so the detour via the tasklet can be avoided. This is also
required for RT, where the majority of hrtimer is moved into softirq
hrtimer context.
The selection of the expiry mode happens via a mode bit. Introduce
HRTIMER_MODE_SOFT and the matching combinations with the ABS/REL/PINNED
bits and update the decoding of hrtimer_mode in tracepoints.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-27-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__run_hrtimer() is called with the hrtimer_cpu_base.lock held and
interrupts disabled. Before invoking the timer callback the base lock is
dropped, but interrupts stay disabled.
The upcoming support for softirq based hrtimers requires that interrupts
are enabled before the timer callback is invoked.
To avoid code duplication, take hrtimer_cpu_base.lock with
raw_spin_lock_irqsave(flags) at the call site and hand in the flags as
a parameter. So raw_spin_unlock_irqrestore() before the callback invocation
will either keep interrupts disabled in interrupt context or restore to
interrupt enabled state when called from softirq context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-26-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Preparatory patch for softirq based hrtimers to avoid code duplication.
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-25-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Preparatory patch for softirq based hrtimers to avoid code duplication,
factor out the __hrtimer_start_range_ns() function from hrtimer_start_range_ns().
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-24-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_reprogram() must have access to the hrtimer_clock_base of the new
first expiring timer to access hrtimer_clock_base.offset for adjusting the
expiry time to CLOCK_MONOTONIC. This is required to evaluate whether the
new left most timer in the hrtimer_clock_base is the first expiring timer
of all clock bases in a hrtimer_cpu_base.
The only user of hrtimer_reprogram() is hrtimer_start_range_ns(), which has
a pointer to hrtimer_clock_base() already and hands it in as a parameter. But
hrtimer_start_range_ns() will be split for the upcoming support for softirq
based hrtimers to avoid code duplication and will lose the direct access to
the clock base pointer.
Instead of handing in timer and timer->base as a parameter remove the base
parameter from hrtimer_reprogram() instead and retrieve the clock base internally.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-23-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current decision whether a timer can be queued on a remote CPU checks
for timer->expiry <= remote_cpu_base.expires_next.
This is too restrictive because a timer with the same expiry time as an
existing timer will be enqueued on right-hand size of the existing timer
inside the rbtree, i.e. behind the first expiring timer.
So its safe to allow enqueuing timers with the same expiry time as the
first expiring timer on a remote CPU base.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-22-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_reprogram() is conditionally invoked from hrtimer_start_range_ns()
when hrtimer_cpu_base.hres_active is true.
In the !hres_active case there is a special condition for the nohz_active
case:
If the newly enqueued timer expires before the first expiring timer on a
remote CPU then the remote CPU needs to be notified and woken up from a
NOHZ idle sleep to take the new first expiring timer into account.
Previous changes have already established the prerequisites to make the
remote enqueue behaviour the same whether high resolution mode is active or
not:
If the to be enqueued timer expires before the first expiring timer on a
remote CPU, then it cannot be enqueued there.
This was done for the high resolution mode because there is no way to
access the remote CPU timer hardware. The same is true for NOHZ, but was
handled differently by unconditionally enqueuing the timer and waking up
the remote CPU so it can reprogram its timer. Again there is no compelling
reason for this difference.
hrtimer_check_target(), which makes the 'can remote enqueue' decision is
already unconditional, but not yet functional because nothing updates
hrtimer_cpu_base.expires_next in the !hres_active case.
To unify this the following changes are required:
1) Make the store of the new first expiry time unconditonal in
hrtimer_reprogram() and check __hrtimer_hres_active() before proceeding
to the actual hardware access. This check also lets the compiler
eliminate the rest of the function in case of CONFIG_HIGH_RES_TIMERS=n.
2) Invoke hrtimer_reprogram() unconditionally from
hrtimer_start_range_ns()
3) Remove the remote wakeup special case for the !high_res && nohz_active
case.
Confine the timers_nohz_active static key to timer.c which is the only user
now.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-21-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When the first hrtimer on the current CPU is removed,
hrtimer_force_reprogram() is invoked but only when
CONFIG_HIGH_RES_TIMERS=y and hrtimer_cpu_base.hres_active is set.
hrtimer_force_reprogram() updates hrtimer_cpu_base.expires_next and
reprograms the clock event device. When CONFIG_HIGH_RES_TIMERS=y and
hrtimer_cpu_base.hres_active is set, a pointless hrtimer interrupt can be
prevented.
hrtimer_check_target() makes the 'can remote enqueue' decision. As soon as
hrtimer_check_target() is unconditionally available and
hrtimer_cpu_base.expires_next is updated by hrtimer_reprogram(),
hrtimer_force_reprogram() needs to be available unconditionally as well to
prevent the following scenario with CONFIG_HIGH_RES_TIMERS=n:
- the first hrtimer on this CPU is removed and hrtimer_force_reprogram() is
not executed
- CPU goes idle (next timer is calculated and hrtimers are taken into
account)
- a hrtimer is enqueued remote on the idle CPU: hrtimer_check_target()
compares expiry value and hrtimer_cpu_base.expires_next. The expiry value
is after expires_next, so the hrtimer is enqueued. This timer will fire
late, if it expires before the effective first hrtimer on this CPU and
the comparison was with an outdated expires_next value.
To prevent this scenario, make hrtimer_force_reprogram() unconditional
except the effective reprogramming part, which gets eliminated by the
compiler in the CONFIG_HIGH_RES_TIMERS=n case.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-20-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_force_reprogram() needs to be available unconditionally for softirq
based hrtimers. Move the function and all required struct members out of
the CONFIG_HIGH_RES_TIMERS #ifdef.
There is no functional change because hrtimer_force_reprogram() is only
invoked when hrtimer_cpu_base.hres_active is true and
CONFIG_HIGH_RES_TIMERS=y.
Making it unconditional increases the text size for the
CONFIG_HIGH_RES_TIMERS=n case slightly, but avoids replication of that code
for the upcoming softirq based hrtimers support. Most of the code gets
eliminated in the CONFIG_HIGH_RES_TIMERS=n case by the compiler.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-19-anna-maria@linutronix.de
[ Made it build on !CONFIG_HIGH_RES_TIMERS ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_reprogram() needs to be available unconditionally for softirq based
hrtimers. Move the function and all required struct members out of the
CONFIG_HIGH_RES_TIMERS #ifdef.
There is no functional change because hrtimer_reprogram() is only invoked
when hrtimer_cpu_base.hres_active is true. Making it unconditional
increases the text size for the CONFIG_HIGH_RES_TIMERS=n case, but avoids
replication of that code for the upcoming softirq based hrtimers support.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-18-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_cpu_base.next_timer stores the pointer to the next expiring timer
in a CPU base.
This pointer cannot be dereferenced and is solely used to check whether a
hrtimer which is removed is the hrtimer which is the first to expire in the
CPU base. If this is the case, then the timer hardware needs to be
reprogrammed to avoid an extra interrupt for nothing.
Again, this is conditional functionality, but there is no compelling reason
to make this conditional. As a preparation, hrtimer_cpu_base.next_timer
needs to be available unconditonally.
Aside of that the upcoming support for softirq based hrtimers requires access
to this pointer unconditionally as well, so our motivation is not entirely
simplicity based.
Make the update of hrtimer_cpu_base.next_timer unconditional and remove the
#ifdef cruft. The impact on CONFIG_HIGH_RES_TIMERS=n && CONFIG_NOHZ=n is
marginal as it's just a store on an already dirtied cacheline.
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-17-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hrtimer_cpu_base.expires_next is used to cache the next event armed in the
timer hardware. The value is used to check whether an hrtimer can be
enqueued remotely. If the new hrtimer is expiring before expires_next, then
remote enqueue is not possible as the remote hrtimer hardware cannot be
accessed for reprogramming to an earlier expiry time.
The remote enqueue check is currently conditional on
CONFIG_HIGH_RES_TIMERS=y and hrtimer_cpu_base.hres_active. There is no
compelling reason to make this conditional.
Move hrtimer_cpu_base.expires_next out of the CONFIG_HIGH_RES_TIMERS=y
guarded area and remove the conditionals in hrtimer_check_target().
The check is currently a NOOP for the CONFIG_HIGH_RES_TIMERS=n and the
!hrtimer_cpu_base.hres_active case because in these cases nothing updates
hrtimer_cpu_base.expires_next yet. This will be changed with later patches
which further reduce the #ifdef zoo in this code.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-16-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__hrtimer_hres_active() is now available unconditionally, so replace open
coded direct accesses to hrtimer_cpu_base.hres_active.
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-15-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
simplify the code
The hrtimer_cpu_base::hres_active_member field depends on CONFIG_HIGH_RES_TIMERS=y
currently, and all related functions to this member are conditional as well.
To simplify the code make it unconditional and set it to zero during initialization.
(This will also help with the upcoming softirq based hrtimers code.)
The conditional code sections can be avoided by adding IS_ENABLED(HIGHRES)
conditionals into common functions, which ensures dead code elimination.
There is no functional change.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-14-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The pointer to the currently running timer is stored in hrtimer_cpu_base
before the base lock is dropped and the callback is invoked.
This results in two levels of indirections and the upcoming support for
softirq based hrtimer requires splitting the "running" storage into soft
and hard IRQ context expiry.
Storing both in the cpu base would require conditionals in all code paths
accessing that information.
It's possible to have a per clock base sequence count and running pointer
without changing the semantics of the related mechanisms because the timer
base pointer cannot be changed while a timer is running the callback.
Unfortunately this makes cpu_clock base larger than 32 bytes on 32-bit
kernels. Instead of having huge gaps due to alignment, remove the alignment
and let the compiler pack CPU base for 32-bit kernels. The resulting cache access
patterns are fortunately not really different from the current
behaviour. On 64-bit kernels the 64-byte alignment stays and the behaviour is
unchanged. This was determined by analyzing the resulting layout and
looking at the number of cache lines involved for the frequently used
clocks.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-12-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Looping over all clock bases to find active bits is suboptimal if not all
bases are active.
Avoid this by converting it to a __ffs() evaluation. The functionallity is
outsourced into its own function and is called via a macro as suggested by
Peter Zijlstra.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-11-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 'hrtimer_start' tracepoint lacks the mode information. The mode is
important because consecutive starts can switch from ABS to REL or from
PINNED to non PINNED.
Append the mode field.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-10-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The POSIX specification defines that relative CLOCK_REALTIME timers are not
affected by clock modifications. Those timers have to use CLOCK_MONOTONIC
to ensure POSIX compliance.
The introduction of the additional HRTIMER_MODE_PINNED mode broke this
requirement for pinned timers.
There is no user space visible impact because user space timers are not
using pinned mode, but for consistency reasons this needs to be fixed.
Check whether the mode has the HRTIMER_MODE_REL bit set instead of
comparing with HRTIMER_MODE_ABS.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Fixes: 597d0275736d ("timers: Framework for identifying pinned timers")
Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The hrtimer_start[_range_ns]() functions start a timer reliably on this CPU only
when HRTIMER_MODE_PINNED is set.
Furthermore the HRTIMER_MODE_PINNED mode is not considered when a hrtimer is initialized.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-6-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
schedule_hrtimeout_range_clock() uses an 'int clock' parameter for the
clock ID, instead of the customary predefined "clockid_t" type.
In hrtimer coding style the canonical variable name for the clock ID is
'clock_id', therefore change the name of the parameter here as well
to make it all consistent.
While at it, clean up the description for the 'clock_id' and 'mode'
function parameters. The clock modes and the clock IDs are not
restricted as the comment suggests.
Fix the mode description as well for the callers of schedule_hrtimeout_range_clock().
No functional changes intended.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-5-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The protection of a hrtimer which runs its callback against migration to a
different CPU has nothing to do with hard interrupt context.
The protection against migration of a hrtimer running the expiry callback
is the pointer in the cpu_base which holds a pointer to the currently
running timer. This pointer is evaluated in the code which potentially
switches the timer base and makes sure it's kept on the CPU on which the
callback is running.
Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-3-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
migration_enable/nohz_active
The hrtimer_cpu_base::migration_enable and ::nohz_active fields
were originally introduced to avoid accessing global variables
for these decisions.
Still that results in a (cache hot) load and conditional branch,
which can be avoided by using static keys.
Implement it with static keys and optimize for the most critical
case of high performance networking which tends to disable the
timer migration functionality.
No change in functionality.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1801142327490.2371@nanos
Link: https://lkml.kernel.org/r/20171221104205.7269-2-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When the timer base is checked for expired timers then the deferrable base
must be checked as well. This was missed when making the deferrable base
independent of base::nohz_active.
Fixes: ced6d5c11d3e ("timers: Use deferrable base independent of base::nohz_active")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
|
|
Because the return value of cpu_timer_sample_group() is not checked,
compilers and static checkers can legitimately warn about a potential use
of the uninitialized variable 'now'. This is not a runtime issue as all call
sites hand in valid clock ids.
Also cpu_timer_sample_group() is invoked unconditionally even when the
result is not used because *oldval is NULL.
Make the invocation conditional and check the return value.
[ tglx: Massage changelog ]
Signed-off-by: Max R. P. Grossmann <m@max.pm>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/20180108190157.10048-1-m@max.pm
|
|
This patch adds the possibility of getting the delivery of a SIGXCPU
signal whenever there is a runtime overrun. The request is done through
the sched_flags field within the sched_attr structure.
Forward port of https://lkml.org/lkml/2009/10/16/170
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1513077024-25461-1-git-send-email-claudio@evidence.eu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Shifting a negative signed number is undefined behavior. Looking at the
macros MAKE_PROCESS_CPUCLOCK and FD_TO_CLOCKID, it seems that the
subexpression:
(~(clockid_t) (pid) << 3)
where clockid_t resolves to a signed int, which once negated, is
undefined behavior to shift the value of if the results thus far are
negative.
It was further suggested to make these macros into inline functions.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Link: https://lkml.kernel.org/r/1514517100-18051-1-git-send-email-nick.desaulniers@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A pile of fixes for long standing issues with the timer wheel and the
NOHZ code:
- Prevent timer base confusion accross the nohz switch, which can
cause unlocked access and data corruption
- Reinitialize the stale base clock on cpu hotplug to prevent subtle
side effects including rollovers on 32bit
- Prevent an interrupt storm when the timer softirq is already
pending caused by tick_nohz_stop_sched_tick()
- Move the timer start tracepoint to a place where it actually makes
sense
- Add documentation to timerqueue functions as they caused confusion
several times now"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timerqueue: Document return values of timerqueue_add/del()
timers: Invoke timer_start_debug() where it makes sense
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
timers: Reinitialize per cpu bases on hotplug
timers: Use deferrable base independent of base::nohz_active
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three patches addressing the fallout of the CPU_ISOLATION changes
especially with NO_HZ_FULL plus documentation of boot parameter
dependency"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Document boot parameters dependency on CONFIG_CPU_ISOLATION=y
sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default
sched/isolation: Make CONFIG_NO_HZ_FULL select CONFIG_CPU_ISOLATION
|
|
The timer start debug function is called before the proper timer base is
set. As a consequence the trace data contains the stale CPU and flags
values.
Call the debug function after setting the new base and flags.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/20171222145337.792907137@linutronix.de
|
|
The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:
if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))
If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.
Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....
Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.
Reported-by: Sebastian Siewior <bigeasy@linutronix.d>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
|
|
The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.
Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.
Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
|
|
During boot and before base::nohz_active is set in the timer bases, deferrable
timers are enqueued into the standard timer base. This works correctly as
long as base::nohz_active is false.
Once it base::nohz_active is set and a timer which was enqueued before that
is accessed the lock selector code choses the lock of the deferred
base. This causes unlocked access to the standard base and in case the
timer is removed it does not clear the pending flag in the standard base
bitmap which causes get_next_timer_interrupt() to return bogus values.
To prevent that, the deferrable timers must be enqueued in the deferrable
base, even when base::nohz_active is not set. Those deferrable timers also
need to be expired unconditional.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Cc: rt@linutronix.de
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de
|
|
Since the recent remote cpufreq callback work, its possible that a cpufreq
update is triggered from a remote CPU. For single policies however, the current
code uses the local CPU when trying to determine if the remote sg_cpu entered
idle or is busy. This is incorrect. To remedy this, compare with the nohz tick
idle_calls counter of the remote CPU.
Fixes: 674e75411fc2 (sched: cpufreq: Allow remote cpufreq callbacks)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CONFIG_NO_HZ_FULL doesn't make sense without CONFIG_CPU_ISOLATION. In
fact enabling the first without the second is a regression as nohz_full=
boot parameter gets silently ignored.
Besides this unnatural combination hangs RCU gp kthread when running
rcutorture for reasons that are not yet fully understood:
rcu_preempt kthread starved for 9974 jiffies! g4294967208
+c4294967207 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x402 ->cpu=0
rcu_preempt I 7464 8 2 0x80000000
Call Trace:
__schedule+0x493/0x620
schedule+0x24/0x40
schedule_timeout+0x330/0x3b0
? preempt_count_sub+0xea/0x140
? collect_expired_timers+0xb0/0xb0
rcu_gp_kthread+0x6bf/0xef0
This commit therefore makes NO_HZ_FULL select CPU_ISOLATION, which
prevents all these bad behaviours.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <kernellwp@gmail.com>
Fixes: 5c4991e24c69 ("sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL")
Link: http://lkml.kernel.org/r/1513275507-29200-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into timers/urgent
Pull the last batch of manual timer conversions from Kees Cook:
- final batch of "non trivial" timer conversions (multi-tree dependencies,
things Coccinelle couldn't handle, etc).
- treewide conversions via Coccinelle, in 4 steps:
- DEFINE_TIMER() functions converted to struct timer_list * argument
- init_timer() -> setup_timer()
- setup_timer() -> timer_setup()
- setup_timer() -> timer_setup() (with a single embedded structure)
- deprecated timer API removals (init_timer(), setup_*timer())
- finalization of new API (remove global casts)
|
