summaryrefslogtreecommitdiff
path: root/kernel/time/timekeeping.c
AgeCommit message (Collapse)Author
2019-08-23timekeeping/vsyscall: Prevent math overflow in BOOTTIME updateThomas Gleixner
The VDSO update for CLOCK_BOOTTIME has a overflow issue as it shifts the nanoseconds based boot time offset left by the clocksource shift. That overflows once the boot time offset becomes large enough. As a consequence CLOCK_BOOTTIME in the VDSO becomes a random number causing applications to misbehave. Fix it by storing a timespec64 representation of the offset when boot time is adjusted and add that to the MONOTONIC base time value in the vdso data page. Using the timespec64 representation avoids a 64bit division in the update code. Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908221257580.1983@nanos.tec.linutronix.de
2019-06-22timekeeping: Use proper ktime_add when adding nsecs in coarse offsetJason A. Donenfeld
While this doesn't actually amount to a real difference, since the macro evaluates to the same thing, every place else operates on ktime_t using these functions, so let's not break the pattern. Fixes: e3ff9c3678b4 ("timekeeping: Repair ktime_get_coarse*() granularity") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-1-Jason@zx2c4.com
2019-06-14timekeeping: Repair ktime_get_coarse*() granularityThomas Gleixner
Jason reported that the coarse ktime based time getters advance only once per second and not once per tick as advertised. The code reads only the monotonic base time, which advances once per second. The nanoseconds are accumulated on every tick in xtime_nsec up to a second and the regular time getters take this nanoseconds offset into account, but the ktime_get_coarse*() implementation fails to do so. Add the accumulated xtime_nsec value to the monotonic base time to get the proper per tick advancing coarse tinme. Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-04-15ntp: Audit NTP parameters adjustmentOndrej Mosnacek
Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-15timekeeping: Audit clock adjustmentsOndrej Mosnacek
Emit an audit record whenever the system clock is changed (i.e. shifted by a non-zero offset) by a syscall from userspace. The syscalls than can (at the time of writing) trigger such record are: - settimeofday(2), stime(2), clock_settime(2) -- via do_settimeofday64() - adjtimex(2), clock_adjtime(2) -- via do_adjtimex() The new records have type AUDIT_TIME_INJOFFSET and contain the following fields: - sec -- the 'seconds' part of the offset - nsec -- the 'nanoseconds' part of the offset Example record (time was shifted backwards by ~15.875 seconds): type=TIME_INJOFFSET msg=audit(1530616049.652:13): sec=-16 nsec=124887145 The records of this type will be associated with the corresponding syscall records. Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> [PM: fixed a line width problem in __audit_tk_injoffset()] Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-03-28timekeeping: Force upper bound for setting CLOCK_REALTIMEThomas Gleixner
Several people reported testing failures after setting CLOCK_REALTIME close to the limits of the kernel internal representation in nanoseconds, i.e. year 2262. The failures are exposed in subsequent operations, i.e. when arming timers or when the advancing CLOCK_MONOTONIC makes the calculation of CLOCK_REALTIME overflow into negative space. Now people start to paper over the underlying problem by clamping calculations to the valid range, but that's just wrong because such workarounds will prevent detection of real issues as well. It is reasonable to force an upper bound for the various methods of setting CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum uptime of 30 years which is plenty enough even for esoteric embedded systems. That results in an upper bound of year 2232 for setting the time. Once that limit is reached in reality this limit is only a small part of the problem space. But until then this stops people from trying to paper over the problem at the wrong places. Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de
2019-03-23timekeeping: Consistently use unsigned int for seqcount snapshotRasmus Villemoes
The timekeeping code uses a random mix of "unsigned long" and "unsigned int" for the seqcount snapshots (ratio 14:12). Since the seqlock.h API is entirely based on unsigned int, use that throughout. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190318195557.20773-1-linux@rasmusvillemoes.dk
2019-02-07timex: use __kernel_timex internallyDeepa Dinamani
struct timex is not y2038 safe. Replace all uses of timex with y2038 safe __kernel_timex. Note that struct __kernel_timex is an ABI interface definition. We could define a new structure based on __kernel_timex that is only available internally instead. Right now, there isn't a strong motivation for this as the structure is isolated to a few defined struct timex interfaces and such a structure would be exactly the same as struct timex. The patch was generated by the following coccinelle script: virtual patch @depends on patch forall@ identifier ts; expression e; @@ ( - struct timex ts; + struct __kernel_timex ts; | - struct timex ts = {}; + struct __kernel_timex ts = {}; | - struct timex ts = e; + struct __kernel_timex ts = e; | - struct timex *ts; + struct __kernel_timex *ts; | (memset \| copy_from_user \| copy_to_user \)(..., - sizeof(struct timex)) + sizeof(struct __kernel_timex)) ) @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts, + struct __kernel_timex *ts, ...) { ... } @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts) { + struct __kernel_timex *ts) { ... } Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: linux-alpha@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-28Merge tag 'y2038-for-4.21' of ↵Linus Torvalds
ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "More syscalls and cleanups This concludes the main part of the system call rework for 64-bit time_t, which has spread over most of year 2018, the last six system calls being - ppoll - pselect6 - io_pgetevents - recvmmsg - futex - rt_sigtimedwait As before, nothing changes for 64-bit architectures, while 32-bit architectures gain another entry point that differs only in the layout of the timespec structure. Hopefully in the next release we can wire up all 22 of those system calls on all 32-bit architectures, which gives us a baseline version for glibc to start using them. This does not include the clock_adjtime, getrusage/waitid, and getitimer/setitimer system calls. I still plan to have new versions of those as well, but they are not required for correct operation of the C library since they can be emulated using the old 32-bit time_t based system calls. Aside from the system calls, there are also a few cleanups here, removing old kernel internal interfaces that have become unused after all references got removed. The arch/sh cleanups are part of this, there were posted several times over the past year without a reaction from the maintainers, while the corresponding changes made it into all other architectures" * tag 'y2038-for-4.21' of ssh://gitolite.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: timekeeping: remove obsolete time accessors vfs: replace current_kernel_time64 with ktime equivalent timekeeping: remove timespec_add/timespec_del timekeeping: remove unused {read,update}_persistent_clock sh: remove board_time_init() callback sh: remove unused rtc_sh_get/set_time infrastructure sh: sh03: rtc: push down rtc class ops into driver sh: dreamcast: rtc: push down rtc class ops into driver y2038: signal: Add compat_sys_rt_sigtimedwait_time64 y2038: signal: Add sys_rt_sigtimedwait_time32 y2038: socket: Add compat_sys_recvmmsg_time64 y2038: futex: Add support for __kernel_timespec y2038: futex: Move compat implementation into futex.c io_pgetevents: use __kernel_timespec pselect6: use __kernel_timespec ppoll: use __kernel_timespec signal: Add restore_user_sigmask() signal: Add set_user_sigmask()
2018-12-18timekeeping: remove unused {read,update}_persistent_clockArnd Bergmann
After arch/sh has removed the last reference to these functions, we can remove them completely and just rely on the 64-bit time_t based versions. This cleans up a rather ugly use of __weak functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: John Stultz <john.stultz@linaro.org>
2018-12-05timekeeping: Use proper seqcount initializerBart Van Assche
tk_core.seq is initialized open coded, but that misses to initialize the lockdep map when lockdep is enabled. Lockdep splats involving tk_core seq consequently lack a name and are hard to read. Use the proper initializer which takes care of the lockdep map initialization. [ tglx: Massaged changelog ] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: tj@kernel.org Cc: johannes.berg@intel.com Link: https://lkml.kernel.org/r/20181128234325.110011-12-bvanassche@acm.org
2018-11-23time: Add SPDX license identifiersThomas Gleixner
Update the time(r) core files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Philippe Ombredanne, Kate Stewart and myself. The data has been created with two independent license scanners and manual inspection. The following files do not contain any direct license information and have been omitted from the big initial SPDX changes: timeconst.bc: The .bc files were not touched time.c, timer.c, timekeeping.c: Licence was deduced from EXPORT_SYMBOL_GPL As those files do not contain direct license references they fall under the project license, i.e. GPL V2 only. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: David Riley <davidriley@chromium.org> Cc: Colin Cross <ccross@android.com> Cc: Mark Brown <broonie@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20181031182252.879109557@linutronix.de
2018-11-23time: Remove useless filenames in top level commentsThomas Gleixner
Remove the pointless filenames in the top level comments. They have no value at all and just occupy space. While at it tidy up some of the comments and remove a stale one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Richard Cochran <richardcochran@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Riley <davidriley@chromium.org> Cc: Colin Cross <ccross@android.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lkml.kernel.org/r/20181031182252.794898238@linutronix.de
2018-08-27y2038: make do_gettimeofday() and get_seconds() inlineArnd Bergmann
get_seconds() and do_gettimeofday() are only used by a few modules now any more (waiting for the respective patches to get accepted), and they are among the last holdouts of code that is not y2038 safe in the core kernel. Move the implementation into the timekeeping32.h header to clean up the core kernel and isolate the old interfaces further. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-13Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ...
2018-07-30timekeeping: Prevent false warning when persistent clock is not availablePavel Tatashin
On arches with no persistent clock a message like this is printed during boot: [ 0.000000] Persistent clock returned invalid value The value is not invalid: Zero means that no persistent clock is available and the absence of persistent clock should be quietly accepted. Fixes: 3eca993740b8 ("timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: sboyd@kernel.org Cc: john.stultz@linaro.org Link: https://lkml.kernel.org/r/20180725200018.23722-1-pasha.tatashin@oracle.com
2018-07-19time: Introduce one suspend clocksource to compensate the suspend timeBaolin Wang
On some hardware with multiple clocksources, we have coarse grained clocksources that support the CLOCK_SOURCE_SUSPEND_NONSTOP flag, but which are less than ideal for timekeeping whereas other clocksources can be better candidates but halt on suspend. Currently, the timekeeping core only supports timing suspend using CLOCK_SOURCE_SUSPEND_NONSTOP clocksources if that clocksource is the current clocksource for timekeeping. As a result, some architectures try to implement read_persistent_clock64() using those non-stop clocksources, but isn't really ideal, which will introduce more duplicate code. To fix this, provide logic to allow a registered SUSPEND_NONSTOP clocksource, which isn't the current clocksource, to be used to calculate the suspend time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> [jstultz: minor tweaks to merge with previous resume changes] Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-07-19time: Fix extra sleeptime injection when suspend failsMukesh Ojha
Currently, there exists a corner case assuming when there is only one clocksource e.g RTC, and system failed to go to suspend mode. While resume rtc_resume() injects the sleeptime as timekeeping_rtc_skipresume() returned 'false' (default value of sleeptime_injected) due to which we can see mismatch in timestamps. This issue can also come in a system where more than one clocksource are present and very first suspend fails. Success case: ------------ {sleeptime_injected=false} rtc_suspend() => timekeeping_suspend() => timekeeping_resume() => (sleeptime injected) rtc_resume() Failure case: ------------ {failure in sleep path} {sleeptime_injected=false} rtc_suspend() => rtc_resume() {sleeptime injected again which was not required as the suspend failed} Fix this by handling the boolean logic properly. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Originally-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-07-19timekeeping/ntp: Constify some function argumentsOndrej Mosnacek
Add 'const' to some function arguments and variables to make it easier to read the code. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [jstultz: Also fixup pre-existing checkpatch warnings for prototype arguments with no variable name] Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-07-20timekeeping: Default boot time offset to local_clock()Pavel Tatashin
read_persistent_wall_and_boot_offset() is called during boot to read both the persistent clock and also return the offset between the boot time and the value of persistent clock. Change the default boot_offset from zero to local_clock() so architectures, that do not have a dedicated boot_clock but have early sched_clock(), such as SPARCv9, x86, and possibly more will benefit from this change by getting a better and more consistent estimate of the boot time without need for an arch specific implementation. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-17-pasha.tatashin@oracle.com
2018-07-20timekeeping: Replace read_boot_clock64() with ↵Pavel Tatashin
read_persistent_wall_and_boot_offset() If architecture does not support exact boot time, it is challenging to estimate boot time without having a reference to the current persistent clock value. Yet, it cannot read the persistent clock time again, because this may lead to math discrepancies with the caller of read_boot_clock64() who have read the persistent clock at a different time. This is why it is better to provide two values simultaneously: the persistent clock value, and the boot time. Replace read_boot_clock64() with: read_persistent_wall_and_boot_offset(wall_time, boot_offset) Where wall_time is returned by read_persistent_clock() And boot_offset is wall_time - boot time, which defaults to 0. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-16-pasha.tatashin@oracle.com
2018-07-12Merge branch 'fortglx/4.19/time' of ↵Thomas Gleixner
https://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeeping updates from John Stultz: - Make the timekeeping update more precise when NTP frequency is set directly by updating the multiplier. - Adjust selftests
2018-07-10timekeeping: Update multiplier when NTP frequency is set directlyMiroslav Lichvar
When the NTP frequency is set directly from userspace using the ADJ_FREQUENCY or ADJ_TICK timex mode, immediately update the timekeeper's multiplier instead of waiting for the next tick. This removes a hidden non-deterministic delay in setting of the frequency and allows an extremely tight control of the system clock with update rates close to or even exceeding the kernel HZ. The update is limited to archs using modern timekeeping (!ARCH_USES_GETTIMEOFFSET). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2018-06-19timekeeping: Use ktime_get_real_ts64() instead of getnstimeofday64()Arnd Bergmann
The two do the same, this moves all users to the newer name for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: y2038@lists.linaro.org Cc: Stephen Boyd <sboyd@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: https://lkml.kernel.org/r/20180618140811.2998503-3-arnd@arndb.de
2018-05-19timekeeping: Add ktime_get_coarse_with_offsetArnd Bergmann
I have run into a couple of drivers using current_kernel_time() suffering from the y2038 problem, and they could be converted to using ktime_t, but don't have interfaces that skip the nanosecond calculation at the moment. This introduces ktime_get_coarse_with_offset() as a simpler variant of ktime_get_with_offset(), and adds wrappers for the three time domains we support with the existing function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: y2038@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
2018-05-19timekeeping: Standardize on ktime_get_*() namingArnd Bergmann
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64, get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have rather inconsistent naming, and they differ in the calling conventions by passing the output either by reference or as a return value. Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64, ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64 respectively, and provide the interfaces with macros or inline functions as needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: y2038@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
2018-05-19timekeeping: Clean up ktime_get_real_ts64Arnd Bergmann
In a move to make ktime_get_*() the preferred driver interface into the timekeeping code, sanitizes ktime_get_real_ts64() to be a proper exported symbol rather than an alias for getnstimeofday64(). The internal __getnstimeofday64() is no longer used, so remove that and merge it into ktime_get_real_ts64(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: y2038@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Link: https://lkml.kernel.org/r/20180427134016.2525989-3-arnd@arndb.de
2018-04-26Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIMEThomas Gleixner
Revert commits 92af4dcb4e1c ("tracing: Unify the "boot" and "mono" tracing clocks") 127bfa5f4342 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior") 7250a4047aa6 ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior") d6c7270e913d ("timekeeping: Remove boot time specific code") f2d6fdbfd238 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior") d6ed449afdb3 ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock") 72199320d49d ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock") As stated in the pull request for the unification of CLOCK_MONOTONIC and CLOCK_BOOTTIME, it was clear that we might have to revert the change. As reported by several folks systemd and other applications rely on the documented behaviour of CLOCK_MONOTONIC on Linux and break with the above changes. After resume daemons time out and other timeout related issues are observed. Rafael compiled this list: * systemd kills daemons on resume, after >WatchdogSec seconds of suspending (Genki Sky). [Verified that that's because systemd uses CLOCK_MONOTONIC and expects it to not include the suspend time.] * systemd-journald misbehaves after resume: systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal corrupted or uncleanly shut down, renaming and replacing. (Mike Galbraith). * NetworkManager reports "networking disabled" and networking is broken after resume 50% of the time (Pavel). [May be because of systemd.] * MATE desktop dims the display and starts the screensaver right after system resume (Pavel). * Full system hang during resume (me). [May be due to systemd or NM or both.] That happens on debian and open suse systems. It's sad, that these problems were neither catched in -next nor by those folks who expressed interest in this change. Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reported-by: Genki Sky <sky@genki.is>, Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Easton <kevin@guarana.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2018-04-17timekeeping: Remove __current_kernel_time()Baolin Wang
The __current_kernel_time() function based on 'struct timespec' is no longer recommended for new code, and the only user of this function has been replaced by commit 6909e29fdefb ("kdb: use __ktime_get_real_seconds instead of __current_kernel_time"). Remove the obsolete interface. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: sboyd@kernel.org Cc: broonie@kernel.org Cc: john.stultz@linaro.org Link: https://lkml.kernel.org/r/1a9dbea7ee2cda7efe9ed330874075cf17fdbff6.1523596316.git.baolin.wang@linaro.org
2018-03-13hrtimer: Unify MONOTONIC and BOOTTIME clock behaviorThomas Gleixner
Now that th MONOTONIC and BOOTTIME clocks are indentical remove all the special casing. The user space visible interfaces still support both clocks, but their behavior is identical. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Easton <kevin@guarana.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20180301165150.410218515@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13timekeeping: Remove boot time specific codeThomas Gleixner
Now that the MONOTONIC and BOOTTIME clocks are the same, remove all the special handling from timekeeping. Keep wrappers for the existing users of the *boot* timekeeper interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Easton <kevin@guarana.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20180301165150.236279497@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clockThomas Gleixner
The MONOTONIC clock is not fast forwarded by the time spent in suspend on resume. This is only done for the BOOTTIME clock. The reason why the MONOTONIC clock is not forwarded is historical: the original Linux implementation was using jiffies as a base for the MONOTONIC clock and jiffies have never been advanced after resume. At some point when timekeeping was unified in the core code, the MONONOTIC clock was advanced after resume which also advanced jiffies causing interesting side effects. As a consequence the the MONOTONIC clock forwarding was disabled again and the BOOTTIME clock was introduced, which allows to read time since boot. Back then it was not possible to completely distangle the MONOTONIC clock and jiffies because there were still interfaces which exposed the MONOTONIC clock behaviour based on the timer wheel and therefore jiffies. As of today none of the MONOTONIC clock facilities depends on jiffies anymore so the forwarding can be done seperately. This is achieved by forwarding the variables which are used for the jiffies update after resume before the tick is restarted, In timekeeping resume, the change is rather simple. Instead of updating the offset between the MONOTONIC clock and the REALTIME/BOOTTIME clocks, advance the time keeper base for the MONOTONIC and the MONOTONIC_RAW clocks by the time spent in suspend. The MONOTONIC clock is now the same as the BOOTTIME clock and the offset between the REALTIME and the MONOTONIC clocks is the same as before suspend. There might be side effects in applications, which rely on the (unfortunately) well documented behaviour of the MONOTONIC clock, but the downsides of the existing behaviour are probably worse. There is one obvious issue. Up to now it was possible to retrieve the time spent in suspend by observing the delta between the MONOTONIC clock and the BOOTTIME clock. This is not longer available, but the previously introduced mechanism to read the active non-suspended monotonic time can mitigate that in a detectable fashion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Easton <kevin@guarana.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20180301165150.062975504@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clockThomas Gleixner
The planned change to unify the behaviour of the MONOTONIC and BOOTTIME clocks vs. suspend removes the ability to retrieve the active non-suspended time of a system. Provide a new CLOCK_MONOTONIC_ACTIVE clock which returns the active non-suspended time of the system via clock_gettime(). This preserves the old behaviour of CLOCK_MONOTONIC before the BOOTTIME/MONOTONIC unification. This new clock also allows applications to detect programmatically that the MONOTONIC and BOOTTIME clocks are identical. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kevin Easton <kevin@guarana.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20180301165149.965235774@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-10timekeeping/ntp: Determine the multiplier directly from NTP tick lengthMiroslav Lichvar
When the length of the NTP tick changes significantly, e.g. when an NTP/PTP application is correcting the initial offset of the clock, a large value may accumulate in the NTP error before the multiplier converges to the correct value. It may then take a very long time (hours or even days) before the error is corrected. This causes the clock to have an unstable frequency offset, which has a negative impact on the stability of synchronization with precise time sources (e.g. NTP/PTP using hardware timestamping or the PTP KVM clock). Use division to determine the correct multiplier directly from the NTP tick length and replace the iterative approach. This removes the last major source of the NTP error. The only remaining source is now limited resolution of the multiplier, which is corrected by adding 1 to the multiplier when the system clock is behind the NTP time. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1520620971-9567-3-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-10timekeeping/ntp: Don't align NTP frequency adjustments to ticksMiroslav Lichvar
When the timekeeping multiplier is changed, the NTP error is updated to correct the clock for the delay between the tick and the update of the clock. This error is corrected in later updates and the clock appears as if the frequency was changed exactly on the tick. Remove this correction to keep the point where the frequency is effectively changed at the time of the update. This removes a major source of the NTP error. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1520620971-9567-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-14timekeeping: Remove CONFIG_GENERIC_TIME_VSYSCALL_OLDMiroslav Lichvar
As of d4d1fc61eb38f (ia64: Update fsyscall gettime to use modern vsyscall_update)the last user of CONFIG_GENERIC_TIME_VSYSCALL_OLD have been updated, the legacy support for old-style vsyscall implementations can be removed from the timekeeping code. (Thanks again to Tony Luck for helping remove the last user!) [jstultz: Commit message rework] Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Link: https://lkml.kernel.org/r/1510613491-16695-1-git-send-email-john.stultz@linaro.org
2017-11-12pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()Arnd Bergmann
__getnstimeofday() is a rather odd interface, with a number of quirks: - The caller may come from NMI context, but the implementation is not NMI safe, one way to get there from NMI is NMI handler: something bad panic() kmsg_dump() pstore_dump() pstore_record_init() __getnstimeofday() - The calling conventions are different from any other timekeeping functions, to deal with returning an error code during suspended timekeeping. Address the above issues by using a completely different method to get the time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior when timekeeping is suspended: it returns the time at which it got suspended. As Thomas Gleixner explained, this is safe, as ktime_get_real_fast_ns() does not call into the clocksource driver that might be suspended. The result can easily be transformed into a timespec structure. Since ktime_get_real_fast_ns() was not exported to modules, add the export. The pstore behavior for the suspended case changes slightly, as it now stores the timestamp at which timekeeping was suspended instead of storing a zero timestamp. This change is not addressing y2038-safety, that's subject to a more complex follow up patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Colin Cross <ccross@android.com> Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
2017-10-31Merge branch 'fortglx/4.15/time' of ↵Thomas Gleixner
https://git.linaro.org/people/john.stultz/linux into timers/core Pull timekeeping updates from John Stultz: - More y2038 work from Arnd Bergmann - A new mechanism to allow RTC drivers to specify the resolution of the RTC so the suspend/resume code can make informed decisions whether to inject the suspended time or not in case of fast suspend/resume cycles.
2017-10-30timekeeping: Use timespec64 in timekeeping_inject_offsetArnd Bergmann
As part of changing all the timekeeping code to use 64-bit time_t consistently, this removes the uses of timeval and timespec as much as possible from do_adjtimex() and timekeeping_inject_offset(). The timeval_inject_offset_valid() and timespec_inject_offset_valid() just complicate this, so I'm folding them into the respective callers. This leaves the actual 'struct timex' definition, which is part of the user-space ABI and should be dealt with separately when we have agreed on the ABI change. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-10-30timekeeping: Consolidate timekeeping_inject_offset codeArnd Bergmann
The code to check the adjtimex() or clock_adjtime() arguments is spread out across multiple files for presumably only historic reasons. As a preparatation for a rework to get rid of the use of 'struct timeval' and 'struct timespec' in there, this moves all the portions into kernel/time/timekeeping.c and marks them as 'static'. The warp_clock() function here is not as closely related as the others, but I feel it still makes sense to move it here in order to consolidate all callers of timekeeping_inject_offset(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [jstultz: Whitespace fixup] Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-09-25timekeeping: Provide NMI safe access to clock realtimeThomas Gleixner
The configurable printk timestamping wants access to clock realtime. Right now there is no ktime_get_real_fast_ns() accessor because reading the monotonic base and the realtime offset cannot be done atomically. Contrary to boot time this offset can change during runtime and cause half updated readouts. struct tk_read_base was fully packed when the fast timekeeper access was implemented. commit ceea5e3771ed ("time: Fix clock->read(clock) race around clocksource changes") removed the 'read' function pointer from the structure, but of course left the comment stale. So now the structure can fit a new 64bit member w/o violating the cache line constraints. Add real_base to tk_read_base and update it in the fast timekeeper update sequence. Implement an accessor which follows the same scheme as the accessor to clock monotonic, but uses the new real_base to access clock real time. The runtime overhead for updating real_base is minimal as it just adds two cache hot values and stores them into an already dirtied cache line along with the other fast timekeeper updates. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead,org> Link: https://lkml.kernel.org/r/1505757060-2004-3-git-send-email-prarit@redhat.com
2017-09-25timekeeping: Make fast accessors return 0 before timekeeping is initializedPrarit Bhargava
printk timestamps will be extended to include mono and boot time by using the fast timekeeping accessors ktime_get_mono|boot_fast_ns(). The functions can return garbage before timekeeping is initialized resulting in garbage timestamps. Initialize the fast timekeepers with dummy clocks which guarantee a 0 readout up to timekeeping_init(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1503922914-10660-2-git-send-email-prarit@redhat.com
2017-09-08drivers/pps: aesthetic tweaks to PPS-related contentRobert P. J. Day
Collection of aesthetic adjustments to various PPS-related files, directories and Documentation, some quite minor just for the sake of consistency, including: * Updated example of pps device tree node (courtesy Rodolfo G.) * "PPS-API" -> "PPS API" * "pps_source_info_s" -> "pps_source_info" * "ktimer driver" -> "pps-ktimer driver" * "ppstest /dev/pps0" -> "ppstest /dev/pps1" to match example * Add missing PPS-related entries to MAINTAINERS file * Other trivialities Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261048220.8106@localhost.localdomain Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-04Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A rather small update for the time(r) subsystem: - A new clocksource driver IMX-TPM - Minor fixes to the alarmtimer facility - Device tree cleanups for Renesas drivers - A new kselftest and fixes for the timer related tests - Conversion of the clocksource drivers to use %pOF - Use the proper helpers to access rlimits in the posix-cpu-timer code" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: alarmtimer: Ensure RTC module is not unloaded clocksource: Convert to using %pOF instead of full_name clocksource/drivers/bcm2835: Remove message for a memory allocation failure devicetree: bindings: Remove deprecated properties devicetree: bindings: Remove unused 32-bit CMT bindings devicetree: bindings: Deprecate property, update example devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings devicetree: bindings: Remove sh7372 CMT binding clocksource/drivers/imx-tpm: Add imx tpm timer support dt-bindings: timer: Add nxp tpm timer binding doc posix-cpu-timers: Use dedicated helper to access rlimit values alarmtimer: Fix unavailable wake-up source in sysfs timekeeping: Use proper timekeeper for debug code kselftests: timers: set-timer-lat: Add one-shot timer test cases kselftests: timers: set-timer-lat: Tweak reporting when timer fires early kselftests: timers: freq-step: Fix build warning kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
2017-08-26time: Fix ktime_get_raw() incorrect base accumulationJohn Stultz
In comqit fc6eead7c1e2 ("time: Clean up CLOCK_MONOTONIC_RAW time handling"), the following code got mistakenly added to the update of the raw timekeeper: /* Update the monotonic raw base */ seconds = tk->raw_sec; nsec = (u32)(tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift); tk->tkr_raw.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec); Which adds the raw_sec value and the shifted down raw xtime_nsec to the base value. But the read function adds the shifted down tk->tkr_raw.xtime_nsec value another time, The result of this is that ktime_get_raw() users (which are all internal users) see the raw time move faster then it should (the rate at which can vary with the current size of tkr_raw.xtime_nsec), which has resulted in at least problems with graphics rendering performance. The change tried to match the monotonic base update logic: seconds = (u64)(tk->xtime_sec + tk->wall_to_monotonic.tv_sec); nsec = (u32) tk->wall_to_monotonic.tv_nsec; tk->tkr_mono.base = ns_to_ktime(seconds * NSEC_PER_SEC + nsec); Which adds the wall_to_monotonic.tv_nsec value, but not the tk->tkr_mono.xtime_nsec value to the base. To fix this, simplify the tkr_raw.base accumulation to only accumulate the raw_sec portion, and do not include the tkr_raw.xtime_nsec portion, which will be added at read time. Fixes: fc6eead7c1e2 ("time: Clean up CLOCK_MONOTONIC_RAW time handling") Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Daniel Mentz <danielmentz@google.com> Link: http://lkml.kernel.org/r/1503701824-1645-1-git-send-email-john.stultz@linaro.org
2017-08-17timekeeping: Use proper timekeeper for debug codeStafford Horne
When CONFIG_DEBUG_TIMEKEEPING is enabled the timekeeping_check_update() function will update status like last_warning and underflow_seen on the timekeeper. If there are issues found this state is used to rate limit the warnings that get printed. This rate limiting doesn't really really work if stored in real_tk as the shadow timekeeper is overwritten onto real_tk at the end of every update_wall_time() call, resetting last_warning and other statuses. Fix rate limiting by using the shadow_timekeeper for timekeeping_check_update(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Fixes: commit 57d05a93ada7 ("time: Rework debugging variables so they aren't global") Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-06-20time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLDJohn Stultz
CONFIG_GENERIC_TIME_VSYSCALL_OLD was introduced five years ago to allow a transition from the old vsyscall implementations to the new method (which simplified internal accounting and made timekeeping more precise). However, PPC and IA64 have yet to make the transition, despite in some cases me sending test patches to try to help it along. http://patches.linaro.org/patch/30501/ http://patches.linaro.org/patch/35412/ If its helpful, my last pass at the patches can be found here: https://git.linaro.org/people/john.stultz/linux.git dev/oldvsyscall-cleanup So I think its time to set a deadline and make it clear this is going away. So this patch adds warnings about this functionality being dropped. Likely to be in v4.15. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-06-20time: Clean up CLOCK_MONOTONIC_RAW time handlingJohn Stultz
Now that we fixed the sub-ns handling for CLOCK_MONOTONIC_RAW, remove the duplicitive tk->raw_time.tv_nsec, which can be stored in tk->tkr_raw.xtime_nsec (similarly to how its handled for monotonic time). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Daniel Mentz <danielmentz@google.com> Tested-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-06-20time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accountingJohn Stultz
Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Daniel Mentz <danielmentz@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: "stable #4 . 8+" <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 06:58:18 +0000