| Age | Commit message (Collapse) | Author |
|---|
|
sgs->group_weight is not set while gathering statistics in
update_sg_wakeup_stats(). This means that a group can be classified as
fully busy with 0 running tasks if utilization is high enough.
This path is mainly used for fork and exec.
Fixes: 57abff067a08 ("sched/fair: Rework find_idlest_group()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20200218144534.4564-1-vincent.guittot@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
|
|
Fix kernel-doc warning in kernel/sched/fair.c, caused by a recent
function parameter removal:
../kernel/sched/fair.c:3526: warning: Excess function parameter 'flags' description in 'attach_entity_load_avg'
Fixes: a4f9a0e51bbf ("sched/fair: Remove redundant call to cpufreq_update_util()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/cbe964e4-6879-fd08-41c9-ef1917414af4@infradead.org
|
|
This patch fixes the following sparse warnings in sched/core.c
and sched/membarrier.c:
kernel/sched/core.c:2372:27: error: incompatible types in comparison expression
kernel/sched/core.c:4061:17: error: incompatible types in comparison expression
kernel/sched/core.c:6067:9: error: incompatible types in comparison expression
kernel/sched/membarrier.c:108:21: error: incompatible types in comparison expression
kernel/sched/membarrier.c:177:21: error: incompatible types in comparison expression
kernel/sched/membarrier.c:243:21: error: incompatible types in comparison expression
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200201125803.20245-1-madhuparnabhowmik10@gmail.com
|
|
Issuing write() with count parameter set to 0 on any file under
/proc/pressure/ will cause an OOB write because of the access to
buf[buf_size-1] when NUL-termination is performed. Fix this by checking
for buf_size to be non-zero.
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200203212216.7076-1-surenb@google.com
|
|
to fix XFS performance regression
The following XFS commit:
8ab39f11d974 ("xfs: prevent CIL push holdoff in log recovery")
changed the logic from using bound workqueues to using unbound
workqueues. Functionally this makes sense but it was observed at the
time that the dbench performance dropped quite a lot and CPU migrations
were increased.
The current pattern of the task migration is straight-forward. With XFS,
an IO issuer delegates work to xlog_cil_push_work ()on an unbound kworker.
This runs on a nearby CPU and on completion, dbench wakes up on its old CPU
as it is still idle and no migration occurs. dbench then queues the real
IO on the blk_mq_requeue_work() work item which runs on a bound kworker
which is forced to run on the same CPU as dbench. When IO completes,
the bound kworker wakes dbench but as the kworker is a bound but,
real task, the CPU is not considered idle and dbench gets migrated by
select_idle_sibling() to a new CPU. dbench may ping-pong between two CPUs
for a while but ultimately it starts a round-robin of all CPUs sharing
the same LLC. High-frequency migration on each IO completion has poor
performance overall. It has negative implications both in commication
costs and power management. mpstat confirmed that at low thread counts
that all CPUs sharing an LLC has low level of activity.
Note that even if the CIL patch was reverted, there still would
be migrations but the impact is less noticeable. It turns out that
individually the scheduler, XFS, blk-mq and workqueues all made sensible
decisions but in combination, the overall effect was sub-optimal.
This patch special cases the IO issue/completion pattern and allows
a bound kworker waker and a task wakee to stack on the same CPU if
there is a strong chance they are directly related. The expectation
is that the kworker is likely going back to sleep shortly. This is not
guaranteed as the IO could be queued asynchronously but there is a very
strong relationship between the task and kworker in this case that would
justify stacking on the same CPU instead of migrating. There should be
few concerns about kworker starvation given that the special casing is
only when the kworker is the waker.
DBench on XFS
MMTests config: io-dbench4-async modified to run on a fresh XFS filesystem
UMA machine with 8 cores sharing LLC
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack
Amean 1 22.63 ( 0.00%) 20.54 * 9.23%*
Amean 2 25.56 ( 0.00%) 23.40 * 8.44%*
Amean 4 28.63 ( 0.00%) 27.85 * 2.70%*
Amean 8 37.66 ( 0.00%) 37.68 ( -0.05%)
Amean 64 469.47 ( 0.00%) 468.26 ( 0.26%)
Stddev 1 1.00 ( 0.00%) 0.72 ( 28.12%)
Stddev 2 1.62 ( 0.00%) 1.97 ( -21.54%)
Stddev 4 2.53 ( 0.00%) 3.58 ( -41.19%)
Stddev 8 5.30 ( 0.00%) 5.20 ( 1.92%)
Stddev 64 86.36 ( 0.00%) 94.53 ( -9.46%)
NUMA machine, 48 CPUs total, 24 CPUs share cache
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack-v1r2
Amean 1 58.69 ( 0.00%) 30.21 * 48.53%*
Amean 2 60.90 ( 0.00%) 35.29 * 42.05%*
Amean 4 66.77 ( 0.00%) 46.55 * 30.28%*
Amean 8 81.41 ( 0.00%) 68.46 * 15.91%*
Amean 16 113.29 ( 0.00%) 107.79 * 4.85%*
Amean 32 199.10 ( 0.00%) 198.22 * 0.44%*
Amean 64 478.99 ( 0.00%) 477.06 * 0.40%*
Amean 128 1345.26 ( 0.00%) 1372.64 * -2.04%*
Stddev 1 2.64 ( 0.00%) 4.17 ( -58.08%)
Stddev 2 4.35 ( 0.00%) 5.38 ( -23.73%)
Stddev 4 6.77 ( 0.00%) 6.56 ( 3.00%)
Stddev 8 11.61 ( 0.00%) 10.91 ( 6.04%)
Stddev 16 18.63 ( 0.00%) 19.19 ( -3.01%)
Stddev 32 38.71 ( 0.00%) 38.30 ( 1.06%)
Stddev 64 100.28 ( 0.00%) 91.24 ( 9.02%)
Stddev 128 186.87 ( 0.00%) 160.34 ( 14.20%)
Dbench has been modified to report the time to complete a single "load
file". This is a more meaningful metric for dbench that a throughput
metric as the benchmark makes many different system calls that are not
throughput-related
Patch shows a 9.23% and 48.53% reduction in the time to process a load
file with the difference partially explained by the number of CPUs sharing
a LLC. In a separate run, task migrations were almost eliminated by the
patch for low client counts. In case people have issue with the metric
used for the benchmark, this is a comparison of the throughputs as
reported by dbench on the NUMA machine.
dbench4 Throughput (misleading but traditional)
5.5.0-rc7 5.5.0-rc7
tipsched-20200124 kworkerstack-v1r2
Hmean 1 321.41 ( 0.00%) 617.82 * 92.22%*
Hmean 2 622.87 ( 0.00%) 1066.80 * 71.27%*
Hmean 4 1134.56 ( 0.00%) 1623.74 * 43.12%*
Hmean 8 1869.96 ( 0.00%) 2212.67 * 18.33%*
Hmean 16 2673.11 ( 0.00%) 2806.13 * 4.98%*
Hmean 32 3032.74 ( 0.00%) 3039.54 ( 0.22%)
Hmean 64 2514.25 ( 0.00%) 2498.96 * -0.61%*
Hmean 128 1778.49 ( 0.00%) 1746.05 * -1.82%*
Note that this is somewhat specific to XFS and ext4 shows no performance
difference as it does not rely on kworkers in the same way. No major
problem was observed running other workloads on different machines although
not all tests have completed yet.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200128154006.GD3466@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a running task is moved on a throttled task group and there is no
other task enqueued on the CPU, the task can keep running using 100% CPU
whatever the allocated bandwidth for the group and although its cfs rq is
throttled. Furthermore, the group entity of the cfs_rq and its parents are
not enqueued but only set as curr on their respective cfs_rqs.
We have the following sequence:
sched_move_task
-dequeue_task: dequeue task and group_entities.
-put_prev_task: put task and group entities.
-sched_change_group: move task to new group.
-enqueue_task: enqueue only task but not group entities because cfs_rq is
throttled.
-set_next_task : set task and group_entities as current sched_entity of
their cfs_rq.
Another impact is that the root cfs_rq runnable_load_avg at root rq stays
null because the group_entities are not enqueued. This situation will stay
the same until an "external" event triggers a reschedule. Let trigger it
immediately instead.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ben Segall <bsegall@google.com>
Link: https://lkml.kernel.org/r/1579011236-31256-1-git-send-email-vincent.guittot@linaro.org
|
|
On a machine, CPU 0 is used for housekeeping, the other 39 CPUs in the
same socket are in nohz_full mode. We can observe huge time burn in the
loop for seaching nearest busy housekeeper cpu by ftrace.
2) | get_nohz_timer_target() {
2) 0.240 us | housekeeping_test_cpu();
2) 0.458 us | housekeeping_test_cpu();
...
2) 0.292 us | housekeeping_test_cpu();
2) 0.240 us | housekeeping_test_cpu();
2) 0.227 us | housekeeping_any_cpu();
2) + 43.460 us | }
This patch optimizes the searching logic by finding a nearest housekeeper
CPU in the housekeeping cpumask, it can minimize the worst searching time
from ~44us to < 10us in my testing. In addition, the last iterated busy
housekeeper can become a random candidate while current CPU is a better
fallback if it is a housekeeper.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/1578876627-11938-1-git-send-email-wanpengli@tencent.com
|
|
The check to ensure that the new written value into cpu.uclamp.{min,max}
is within range, [0:100], wasn't working because of the signed
comparison
7301 if (req.percent > UCLAMP_PERCENT_SCALE) {
7302 req.ret = -ERANGE;
7303 return req;
7304 }
# echo -1 > cpu.uclamp.min
# cat cpu.uclamp.min
42949671.96
Cast req.percent into u64 to force the comparison to be unsigned and
work as intended in capacity_from_percent().
# echo -1 > cpu.uclamp.min
sh: write error: Numerical result out of range
Fixes: 2480c093130f ("sched/uclamp: Extend CPU's cgroup controller")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200114210947.14083-1-qais.yousef@arm.com
|
|
The CPU load balancer balances between different domains to spread load
and strives to have equal balance everywhere. Communicating tasks can
migrate so they are topologically close to each other but these decisions
are independent. On a lightly loaded NUMA machine, two communicating tasks
pulled together at wakeup time can be pushed apart by the load balancer.
In isolation, the load balancer decision is fine but it ignores the tasks
data locality and the wakeup/LB paths continually conflict. NUMA balancing
is also a factor but it also simply conflicts with the load balancer.
This patch allows a fixed degree of imbalance of two tasks to exist
between NUMA domains regardless of utilisation levels. In many cases,
this prevents communicating tasks being pulled apart. It was evaluated
whether the imbalance should be scaled to the domain size. However, no
additional benefit was measured across a range of workloads and machines
and scaling adds the risk that lower domains have to be rebalanced. While
this could change again in the future, such a change should specify the
use case and benefit.
The most obvious impact is on netperf TCP_STREAM -- two simple
communicating tasks with some softirq offload depending on the
transmission rate.
2-socket Haswell machine 48 core, HT enabled
netperf-tcp -- mmtests config config-network-netperf-unbound
baseline lbnuma-v3
Hmean 64 568.73 ( 0.00%) 577.56 * 1.55%*
Hmean 128 1089.98 ( 0.00%) 1128.06 * 3.49%*
Hmean 256 2061.72 ( 0.00%) 2104.39 * 2.07%*
Hmean 1024 7254.27 ( 0.00%) 7557.52 * 4.18%*
Hmean 2048 11729.20 ( 0.00%) 13350.67 * 13.82%*
Hmean 3312 15309.08 ( 0.00%) 18058.95 * 17.96%*
Hmean 4096 17338.75 ( 0.00%) 20483.66 * 18.14%*
Hmean 8192 25047.12 ( 0.00%) 27806.84 * 11.02%*
Hmean 16384 27359.55 ( 0.00%) 33071.88 * 20.88%*
Stddev 64 2.16 ( 0.00%) 2.02 ( 6.53%)
Stddev 128 2.31 ( 0.00%) 2.19 ( 5.05%)
Stddev 256 11.88 ( 0.00%) 3.22 ( 72.88%)
Stddev 1024 23.68 ( 0.00%) 7.24 ( 69.43%)
Stddev 2048 79.46 ( 0.00%) 71.49 ( 10.03%)
Stddev 3312 26.71 ( 0.00%) 57.80 (-116.41%)
Stddev 4096 185.57 ( 0.00%) 96.15 ( 48.19%)
Stddev 8192 245.80 ( 0.00%) 100.73 ( 59.02%)
Stddev 16384 207.31 ( 0.00%) 141.65 ( 31.67%)
In this case, there was a sizable improvement to performance and
a general reduction in variance. However, this is not univeral.
For most machines, the impact was roughly a 3% performance gain.
Ops NUMA base-page range updates 19796.00 292.00
Ops NUMA PTE updates 19796.00 292.00
Ops NUMA PMD updates 0.00 0.00
Ops NUMA hint faults 16113.00 143.00
Ops NUMA hint local faults % 8407.00 142.00
Ops NUMA hint local percent 52.18 99.30
Ops NUMA pages migrated 4244.00 1.00
Without the patch, only 52.18% of sampled accesses are local. In an
earlier changelog, 100% of sampled accesses are local and indeed on
most machines, this was still the case. In this specific case, the
local sampled rates was 99.3% but note the "base-page range updates"
and "PTE updates". The activity with the patch is negligible as were
the number of faults. The small number of pages migrated were related to
shared libraries. A 2-socket Broadwell showed better results on average
but are not presented for brevity as the performance was similar except
it showed 100% of the sampled NUMA hints were local. The patch holds up
for a 4-socket Haswell, an AMD EPYC and AMD Epyc 2 machine.
For dbench, the impact depends on the filesystem used and the number of
clients. On XFS, there is little difference as the clients typically
communicate with workqueues which have a separate class of scheduler
problem at the moment. For ext4, performance is generally better,
particularly for small numbers of clients as NUMA balancing activity is
negligible with the patch applied.
A more interesting example is the Facebook schbench which uses a
number of messaging threads to communicate with worker threads. In this
configuration, one messaging thread is used per NUMA node and the number of
worker threads is varied. The 50, 75, 90, 95, 99, 99.5 and 99.9 percentiles
for response latency is then reported.
Lat 50.00th-qrtle-1 44.00 ( 0.00%) 37.00 ( 15.91%)
Lat 75.00th-qrtle-1 53.00 ( 0.00%) 41.00 ( 22.64%)
Lat 90.00th-qrtle-1 57.00 ( 0.00%) 42.00 ( 26.32%)
Lat 95.00th-qrtle-1 63.00 ( 0.00%) 43.00 ( 31.75%)
Lat 99.00th-qrtle-1 76.00 ( 0.00%) 51.00 ( 32.89%)
Lat 99.50th-qrtle-1 89.00 ( 0.00%) 52.00 ( 41.57%)
Lat 99.90th-qrtle-1 98.00 ( 0.00%) 55.00 ( 43.88%)
Lat 50.00th-qrtle-2 42.00 ( 0.00%) 42.00 ( 0.00%)
Lat 75.00th-qrtle-2 48.00 ( 0.00%) 47.00 ( 2.08%)
Lat 90.00th-qrtle-2 53.00 ( 0.00%) 52.00 ( 1.89%)
Lat 95.00th-qrtle-2 55.00 ( 0.00%) 53.00 ( 3.64%)
Lat 99.00th-qrtle-2 62.00 ( 0.00%) 60.00 ( 3.23%)
Lat 99.50th-qrtle-2 63.00 ( 0.00%) 63.00 ( 0.00%)
Lat 99.90th-qrtle-2 68.00 ( 0.00%) 66.00 ( 2.94%
For higher worker threads, the differences become negligible but it's
interesting to note the difference in wakeup latency at low utilisation
and mpstat confirms that activity was almost all on one node until
the number of worker threads increase.
Hackbench generally showed neutral results across a range of machines.
This is different to earlier versions of the patch which allowed imbalances
for higher degrees of utilisation. perf bench pipe showed negligible
differences in overall performance as the differences are very close to
the noise.
An earlier prototype of the patch showed major regressions for NAS C-class
when running with only half of the available CPUs -- 20-30% performance
hits were measured at the time. With this version of the patch, the impact
is negligible with small gains/losses within the noise measured. This is
because the number of threads far exceeds the small imbalance the aptch
cares about. Similarly, there were report of regressions for the autonuma
benchmark against earlier versions but again, normal load balancing now
applies for that workload.
In general, the patch simply seeks to avoid unnecessary cross-node
migrations in the basic case where imbalances are very small. For low
utilisation communicating workloads, this patch generally behaves better
with less NUMA balancing activity. For high utilisation, there is no
change in behaviour.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Link: https://lkml.kernel.org/r/20200114101319.GO3466@techsingularity.net
|
|
The way loadavg is tracked during nohz only pays attention to the load
upon entering nohz. This can be particularly noticeable if full nohz is
entered while non-idle, and then the cpu goes idle and stays that way for
a long time.
Use the remote tick to ensure that full nohz cpus report their deltas
within a reasonable time.
[ swood: Added changelog and removed recheck of stopped tick. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1578736419-14628-3-git-send-email-swood@redhat.com
|
|
This will be used in the next patch to get a loadavg update from
nohz cpus. The delta check is skipped because idle_sched_class
doesn't update se.exec_start.
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/1578736419-14628-2-git-send-email-swood@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
|
|
The affinity of managed interrupts is completely handled in the kernel and
cannot be changed via the /proc/irq/* interfaces from user space. As the
kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent
vector exhaustion, it can happen that a managed interrupt whose affinity
mask contains both isolated and housekeeping CPUs is routed to an isolated
CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts
on the isolated CPU.
Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding
logic in the interrupt affinity selection code.
The subparameter indicates to the interrupt affinity selection logic that
it should try to avoid the above scenario.
This isolation is best effort and only effective if the automatically
assigned interrupt mask of a device queue contains isolated and
housekeeping CPUs. If housekeeping CPUs are online then such interrupts are
directed to the housekeeping CPU so that IO submitted on the housekeeping
CPU cannot disturb the isolated CPU.
If a queue's affinity mask contains only isolated CPUs then this parameter
has no effect on the interrupt routing decision, though interrupts are only
happening when tasks running on those isolated CPUs submit IO. IO submitted
on housekeeping CPUs has no influence on those queues.
If the affinity mask contains both housekeeping and isolated CPUs, but none
of the contained housekeeping CPUs is online, then the interrupt is also
routed to an isolated CPU. Interrupts are only delivered when one of the
isolated CPUs in the affinity mask submits IO. If one of the contained
housekeeping CPUs comes online, the CPU hotplug logic migrates the
interrupt automatically back to the upcoming housekeeping CPU. Depending on
the type of interrupt controller, this can require that at least one
interrupt is delivered to the isolated CPU in order to complete the
migration.
[ tglx: Removed unused parameter, added and edited comments/documentation
and rephrased the changelog so it contains more details. ]
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
|
|
sched_idle_cpu() isn't used for non SMP configuration and with a recent
change, we have started getting following warning:
kernel/sched/fair.c:5221:12: warning: ‘sched_idle_cpu’ defined but not used [-Wunused-function]
Fix that by defining sched_idle_cpu() only for SMP configurations.
Fixes: 323af6deaf70 ("sched/fair: Load balance aggressively for SCHED_IDLE CPUs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/f0554f590687478b33914a4aff9f0e6a62886d44.1579499907.git.viresh.kumar@linaro.org
|
|
topology.c::get_group() relies on the assumption that non-NUMA domains do
not partially overlap. Zeng Tao pointed out in [1] that such topology
descriptions, while completely bogus, can end up being exposed to the
scheduler.
In his example (8 CPUs, 2-node system), we end up with:
MC span for CPU3 == 3-7
MC span for CPU4 == 4-7
The first pass through get_group(3, sdd@MC) will result in the following
sched_group list:
3 -> 4 -> 5 -> 6 -> 7
^ /
`----------------'
And a later pass through get_group(4, sdd@MC) will "corrupt" that to:
3 -> 4 -> 5 -> 6 -> 7
^ /
`-----------'
which will completely break things like 'while (sg != sd->groups)' when
using CPU3's base sched_domain.
There already are some architecture-specific checks in place such as
x86/kernel/smpboot.c::topology.sane(), but this is something we can detect
in the core scheduler, so it seems worthwhile to do so.
Warn and abort the construction of the sched domains if such a broken
topology description is detected. Note that this is somewhat
expensive (O(t.c²), 't' non-NUMA topology levels and 'c' CPUs) and could be
gated under SCHED_DEBUG if deemed necessary.
Testing
=======
Dietmar managed to reproduce this using the following qemu incantation:
$ qemu-system-aarch64 -kernel ./Image -hda ./qemu-image-aarch64.img \
-append 'root=/dev/vda console=ttyAMA0 loglevel=8 sched_debug' -smp \
cores=8 --nographic -m 512 -cpu cortex-a53 -machine virt -numa \
node,cpus=0-2,nodeid=0 -numa node,cpus=3-7,nodeid=1
alongside the following drivers/base/arch_topology.c hack (AIUI wouldn't be
needed if '-smp cores=X, sockets=Y' would work with qemu):
8<---
@@ -465,6 +465,9 @@ void update_siblings_masks(unsigned int cpuid)
if (cpuid_topo->package_id != cpu_topo->package_id)
continue;
+ if ((cpu < 4 && cpuid > 3) || (cpu > 3 && cpuid < 4))
+ continue;
+
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
8<---
[1]: https://lkml.kernel.org/r/1577088979-8545-1-git-send-email-prime.zeng@hisilicon.com
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200115160915.22575-1-valentin.schneider@arm.com
|
|
There is a spelling misake in comments of cpuidle_idle_call. Fix it.
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200110025604.34373-1-hewenliang4@huawei.com
|
|
With commit
bef69dd87828 ("sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()")
update_load_avg() has become the central point for calling cpufreq
(not including the update of blocked load). This change helps to
simplify further the number of calls to cpufreq_update_util() and to
remove last redundant ones. With update_load_avg(), we are now sure
that cpufreq_update_util() will be called after every task attachment
to a cfs_rq and especially after propagating this event down to the
util_avg of the root cfs_rq, which is the level that is used by
cpufreq governors like schedutil to set the frequency of a CPU.
The SCHED_CPUFREQ_MIGRATION flag forces an early call to cpufreq when
the migration happens in a cgroup whereas util_avg of root cfs_rq is
not yet updated and this call is duplicated with the one that happens
immediately after when the migration event reaches the root cfs_rq.
The dedicated flag SCHED_CPUFREQ_MIGRATION is now useless and can be
removed. The interface of attach_entity_load_avg() can also be
simplified accordingly.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/1579083620-24943-1-git-send-email-vincent.guittot@linaro.org
|
|
when psi enabled
when CONFIG_PSI_DEFAULT_DISABLED set to N or the command line set psi=0,
I think we should not create /proc/pressure and
/proc/pressure/{io|memory|cpu}.
In the future, user maybe determine whether the psi feature is enabled by
checking the existence of the /proc/pressure dir or
/proc/pressure/{io|memory|cpu} files.
Signed-off-by: Wang Long <w@laoqinren.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1576672698-32504-1-git-send-email-w@laoqinren.net
|
|
commit bf475ce0a3dd ("sched/fair: Add per-CPU min capacity to
sched_group_capacity") introduced per-cpu min_capacity.
commit e3d6d0cb66f2 ("sched/fair: Add sched_group per-CPU max capacity")
introduced per-cpu max_capacity.
In the SD_OVERLAP case, the local variable 'capacity' represents the sum
of CPU capacity of all CPUs in the first sched group (sg) of the sched
domain (sd).
It is erroneously used to calculate sg's min and max CPU capacity.
To fix this use capacity_of(cpu) instead of 'capacity'.
The code which achieves this via cpu_rq(cpu)->sd->groups->sgc->capacity
(for rq->sd != NULL) can be removed since it delivers the same value as
capacity_of(cpu) which is currently only used for the (!rq->sd) case
(see update_cpu_capacity()).
An sg of the lowest sd (rq->sd or sd->child == NULL) represents a single
CPU (and hence sg->sgc->capacity == capacity_of(cpu)).
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20200104130828.GA7718@iZj6chx1xj0e0buvshuecpZ
|
|
Move the code of calculation for delta_sum/delta_avg to where
it is really needed to be done.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200103114400.17668-1-rocking@linux.alibaba.com
|
|
Every time we call irqtime_account_process_tick() is in a interrupt,
Every caller will get and assign a parameter rq = this_rq(), This is
unnecessary and increase the code size a little bit. Move the rq getting
action to irqtime_account_process_tick internally is better.
base with this patch
cputime.o 578792 bytes 577888 bytes
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1577959674-255537-1-git-send-email-alex.shi@linux.alibaba.com
|
|
Lengthy output of sysrq-t may take a lot of time on slow serial console
with lots of processes and CPUs.
So we need to reset NMI-watchdog to avoid spurious lockup messages, and
we also reset softlockup watchdogs on all other CPUs since another CPU
might be blocked waiting for us to process an IPI or stop_machine.
Add to sysrq_sched_debug_show() as what we did in show_state_filter().
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20191226085224.48942-1-liwei391@huawei.com
|
|
rq::uclamp is an array of struct uclamp_rq, make sure we clear the
whole thing.
Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcountinga")
Signed-off-by: Li Guanglei <guanglei.li@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/1577259844-12677-1-git-send-email-guangleix.li@gmail.com
|
|
When a new cgroup is created, the effective uclamp value wasn't updated
with a call to cpu_util_update_eff() that looks at the hierarchy and
update to the most restrictive values.
Fix it by ensuring to call cpu_util_update_eff() when a new cgroup
becomes online.
Without this change, the newly created cgroup uses the default
root_task_group uclamp values, which is 1024 for both uclamp_{min, max},
which will cause the rq to to be clamped to max, hence cause the
system to run at max frequency.
The problem was observed on Ubuntu server and was reproduced on Debian
and Buildroot rootfs.
By default, Ubuntu and Debian create a cpu controller cgroup hierarchy
and add all tasks to it - which creates enough noise to keep the rq
uclamp value at max most of the time. Imitating this behavior makes the
problem visible in Buildroot too which otherwise looks fine since it's a
minimal userspace.
Fixes: 0b60ba2dd342 ("sched/uclamp: Propagate parent clamps")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Doug Smythies <dsmythies@telus.net>
Link: https://lore.kernel.org/lkml/000701d5b965$361b6c60$a2524520$@net/
|
|
The fair scheduler performs periodic load balance on every CPU to check
if it can pull some tasks from other busy CPUs. The duration of this
periodic load balance is set to sd->balance_interval for the idle CPUs
and is calculated by multiplying the sd->balance_interval with the
sd->busy_factor (set to 32 by default) for the busy CPUs. The
multiplication is done for busy CPUs to avoid doing load balance too
often and rather spend more time executing actual task. While that is
the right thing to do for the CPUs busy with SCHED_OTHER or SCHED_BATCH
tasks, it may not be the optimal thing for CPUs running only SCHED_IDLE
tasks.
With the recent enhancements in the fair scheduler around SCHED_IDLE
CPUs, we now prefer to enqueue a newly-woken task to a SCHED_IDLE
CPU instead of other busy or idle CPUs. The same reasoning should be
applied to the load balancer as well to make it migrate tasks more
aggressively to a SCHED_IDLE CPU, as that will reduce the scheduling
latency of the migrated (SCHED_OTHER) tasks.
This patch makes minimal changes to the fair scheduler to do the next
load balance soon after the last non SCHED_IDLE task is dequeued from a
runqueue, i.e. making the CPU SCHED_IDLE. Also the sd->busy_factor is
ignored while calculating the balance_interval for such CPUs. This is
done to avoid delaying the periodic load balance by few hundred
milliseconds for SCHED_IDLE CPUs.
This is tested on ARM64 Hikey620 platform (octa-core) with the help of
rt-app and it is verified, using kernel traces, that the newly
SCHED_IDLE CPU does load balancing shortly after it becomes SCHED_IDLE
and pulls tasks from other busy CPUs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/e485827eb8fe7db0943d6f3f6e0f5a4a70272781.1578471925.git.viresh.kumar@linaro.org
|
|
Similarly to calculate_imbalance() and find_busiest_group(), using the
number of idle CPUs when there is only 1 CPU in the group is not efficient
because we can't make a difference between a CPU running 1 task and a CPU
running dozens of small tasks competing for the same CPU but not enough
to overload it. More generally speaking, we should use the number of
running tasks when there is the same number of idle CPUs in a group instead
of blindly select the 1st one.
When the groups have spare capacity and the same number of idle CPUs, we
compare the number of running tasks to select the busiest group.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1576839893-26930-1-git-send-email-vincent.guittot@linaro.org
|
|
Capacity Awareness refers to the fact that on heterogeneous systems
(like Arm big.LITTLE), the capacity of the CPUs is not uniform, hence
when placing tasks we need to be aware of this difference of CPU
capacities.
In such scenarios we want to ensure that the selected CPU has enough
capacity to meet the requirement of the running task. Enough capacity
means here that capacity_orig_of(cpu) >= task.requirement.
The definition of task.requirement is dependent on the scheduling class.
For CFS, utilization is used to select a CPU that has >= capacity value
than the cfs_task.util.
capacity_orig_of(cpu) >= cfs_task.util
DL isn't capacity aware at the moment but can make use of the bandwidth
reservation to implement that in a similar manner CFS uses utilization.
The following patchset implements that:
https://lore.kernel.org/lkml/20190506044836.2914-1-luca.abeni@santannapisa.it/
capacity_orig_of(cpu)/SCHED_CAPACITY >= dl_deadline/dl_runtime
For RT we don't have a per task utilization signal and we lack any
information in general about what performance requirement the RT task
needs. But with the introduction of uclamp, RT tasks can now control
that by setting uclamp_min to guarantee a minimum performance point.
ATM the uclamp value are only used for frequency selection; but on
heterogeneous systems this is not enough and we need to ensure that the
capacity of the CPU is >= uclamp_min. Which is what implemented here.
capacity_orig_of(cpu) >= rt_task.uclamp_min
Note that by default uclamp.min is 1024, which means that RT tasks will
always be biased towards the big CPUs, which make for a better more
predictable behavior for the default case.
Must stress that the bias acts as a hint rather than a definite
placement strategy. For example, if all big cores are busy executing
other RT tasks we can't guarantee that a new RT task will be placed
there.
On non-heterogeneous systems the original behavior of RT should be
retained. Similarly if uclamp is not selected in the config.
[ mingo: Minor edits to comments. ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191009104611.15363-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
task_fits_capacity() has just been made uclamp-aware, and
find_energy_efficient_cpu() needs to go through the same treatment.
Things are somewhat different here however - using the task max clamp isn't
sufficient. Consider the following setup:
The target runqueue, rq:
rq.cpu_capacity_orig = 512
rq.cfs.avg.util_avg = 200
rq.uclamp.max = 768 // the max p.uclamp.max of all enqueued p's is 768
The waking task, p (not yet enqueued on rq):
p.util_est = 600
p.uclamp.max = 100
Now, consider the following code which doesn't use the rq clamps:
util = uclamp_task_util(p);
// Does the task fit in the spare CPU capacity?
cpu = cpu_of(rq);
fits_capacity(util, cpu_capacity(cpu) - cpu_util(cpu))
This would lead to:
util = 100;
fits_capacity(100, 512 - 200)
fits_capacity() would return true. However, enqueuing p on that CPU *will*
cause it to become overutilized since rq clamp values are max-aggregated,
so we'd remain with
rq.uclamp.max = 768
which comes from the other tasks already enqueued on rq. Thus, we could
select a high enough frequency to reach beyond 0.8 * 512 utilization
(== overutilized) after enqueuing p on rq. What find_energy_efficient_cpu()
needs here is uclamp_rq_util_with() which lets us peek at the future
utilization landscape, including rq-wide uclamp values.
Make find_energy_efficient_cpu() use uclamp_rq_util_with() for its
fits_capacity() check. This is in line with what compute_energy() ends up
using for estimating utilization.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-6-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
task_fits_capacity() drives CPU selection at wakeup time, and is also used
to detect misfit tasks. Right now it does so by comparing task_util_est()
with a CPU's capacity, but doesn't take into account uclamp restrictions.
There's a few interesting uses that can come out of doing this. For
instance, a low uclamp.max value could prevent certain tasks from being
flagged as misfit tasks, so they could merrily remain on low-capacity CPUs.
Similarly, a high uclamp.min value would steer tasks towards high capacity
CPUs at wakeup (and, should that fail, later steered via misfit balancing),
so such "boosted" tasks would favor CPUs of higher capacity.
Introduce uclamp_task_util() and make task_fits_capacity() use it.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-5-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The current helper returns (CPU) rq utilization with uclamp restrictions
taken into account. A uclamp task utilization helper would be quite
helpful, but this requires some renaming.
Prepare the code for the introduction of a uclamp_task_util() by renaming
the existing uclamp_util_with() to uclamp_rq_util_with().
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Vincent pointed out recently that the canonical type for utilization
values is 'unsigned long'. Internally uclamp uses 'unsigned int' values for
cache optimization, but this doesn't have to be exported to its users.
Make the uclamp helpers that deal with utilization use and return unsigned
long values.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The sole user of uclamp_util(), schedutil_cpu_util(), was made to use
uclamp_util_with() instead in commit:
af24bde8df20 ("sched/uclamp: Add uclamp support to energy_compute()")
From then on, uclamp_util() has remained unused. Being a simple wrapper
around uclamp_util_with(), we can get rid of it and win back a few lines.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are instances where we keep searching for an idle CPU despite
already having a sched-idle CPU (in find_idlest_group_cpu(),
select_idle_smt() and select_idle_cpu() and then there are places where
we don't necessarily do that and return a sched-idle CPU as soon as we
find one (in select_idle_sibling()). This looks a bit inconsistent and
it may be worth having the same policy everywhere.
On the other hand, choosing a sched-idle CPU over a idle one shall be
beneficial from performance and power point of view as well, as we don't
need to get the CPU online from a deep idle state which wastes quite a
lot of time and energy and delays the scheduling of the newly woken up
task.
This patch tries to simplify code around sched-idle CPU selection and
make it consistent throughout.
Testing is done with the help of rt-app on hikey board (ARM64 octa-core,
2 clusters, 0-3 and 4-7). The cpufreq governor was set to performance to
avoid any side affects from CPU frequency. Following are the tests
performed:
Test 1: 1-cfs-task:
A single SCHED_NORMAL task is pinned to CPU5 which runs for 2333 us
out of 7777 us (so gives time for the cluster to go in deep idle
state).
Test 2: 1-cfs-1-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and single SCHED_IDLE
task is pinned on CPU6 (to make sure cluster 1 doesn't go in deep idle
state).
Test 3: 1-cfs-8-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and eight SCHED_IDLE
tasks are created which run forever (not pinned anywhere, so they run
on all CPUs). Checked with kernelshark that as soon as NORMAL task
sleeps, the SCHED_IDLE task starts running on CPU5.
And here are the results on mean latency (in us), using the "st" tool.
$ st 1-cfs-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 90 592 197180 307.134 109.906
$ st 1-cfs-1-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 67 311 113850 177.336 41.4251
$ st 1-cfs-8-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
643 29 173 41364 64.3297 13.2344
The mean latency when we need to:
- wakeup from deep idle state is 307 us.
- wakeup from shallow idle state is 177 us.
- preempt a SCHED_IDLE task is 64 us.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/b90cbcce608cef4e02a7bbfe178335f76d201bab.1573728344.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This commit left behind an unused variable:
5443a0be6121 ("sched: Use fair:prio_changed() instead of ad-hoc implementation") left behind an unused variable.
kernel/sched/core.c: In function 'set_user_nice':
kernel/sched/core.c:4507:16: warning: variable 'delta' set but not used
int old_prio, delta;
^~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5443a0be6121 ("sched: Use fair:prio_changed() instead of ad-hoc implementation")
Link: https://lkml.kernel.org/r/20191219140314.1252-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing
fix, and a toning down of active migration attempts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: fix spurious active migration
sched/fair: Fix find_idlest_group() to handle CPU affinity
psi: Fix a division error in psi poll()
sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
|
|
Because of the:
if (!load)
runnable = running = 0;
clause in ___update_load_sum(), all the actual users of @contrib in
accumulate_sum():
if (load)
sa->load_sum += load * contrib;
if (runnable)
sa->runnable_load_sum += runnable * contrib;
if (running)
sa->util_sum += contrib << SCHED_CAPACITY_SHIFT;
don't happen, and therefore we don't care what @contrib actually is and
calculating it is pointless.
If we count the times when @load equals zero and not as below:
if (load) {
load_is_not_zero_count++;
contrib = __accumulate_pelt_segments(periods,
1024 - sa->period_contrib,delta);
} else
load_is_zero_count++;
As we can see, load_is_zero_count is much bigger than
load_is_zero_count, and the gap is gradually widening:
load_is_zero_count: 6016044 times
load_is_not_zero_count: 244316 times
19:50:43 up 1 min, 1 user, load average: 0.09, 0.06, 0.02
load_is_zero_count: 7956168 times
load_is_not_zero_count: 261472 times
19:51:42 up 2 min, 1 user, load average: 0.03, 0.05, 0.01
load_is_zero_count: 10199896 times
load_is_not_zero_count: 278364 times
19:52:51 up 3 min, 1 user, load average: 0.06, 0.05, 0.01
load_is_zero_count: 14333700 times
load_is_not_zero_count: 318424 times
19:54:53 up 5 min, 1 user, load average: 0.01, 0.03, 0.00
Perhaps we can gain some performance advantage by saving these
unnecessary calculation.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot < vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1576208740-35609-1-git-send-email-rocking@linux.alibaba.com
|
|
select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :
1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
introduces a way to limit how many CPUs we scan.
But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.
Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.
Fixes: 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
|
|
init_wait_var_entry() forgets to initialize wq_entry->flags.
Currently not a problem, we don't have wait_var_event_exclusive().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20191210191902.GB14449@redhat.com
|
|
set_user_nice() implements its own version of fair::prio_changed() and
therefore misses a specific optimization towards nohz_full CPUs that
avoid sending an resched IPI to a reniced task running alone. Use the
proper callback instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191203160106.18806-3-frederic@kernel.org
|
|
The runqueue of a fair task being remotely reniced is going to get a
resched IPI in order to reassess which task should be the current
running on the CPU. However that evaluation is useless if the fair task
is running alone, in which case we can spare that IPI, preventing
nohz_full CPUs from being disturbed.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191203160106.18806-2-frederic@kernel.org
|
|
The load balance can fail to find a suitable task during the periodic check
because the imbalance is smaller than half of the load of the waiting
tasks. This results in the increase of the number of failed load balance,
which can end up to start an active migration. This active migration is
useless because the current running task is not a better choice than the
waiting ones. In fact, the current task was probably not running but
waiting for the CPU during one of the previous attempts and it had already
not been selected.
When load balance fails too many times to migrate a task, we should relax
the contraint on the maximum load of the tasks that can be migrated
similarly to what is done with cache hotness.
Before the rework, load balance used to set the imbalance to the average
load_per_task in order to mitigate such situation. This increased the
likelihood of migrating a task but also of selecting a larger task than
needed while more appropriate ones were in the list.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1575036287-6052-1-git-send-email-vincent.guittot@linaro.org
|
|
Because of CPU affinity, the local group can be skipped which breaks the
assumption that statistics are always collected for local group. With
uninitialized local_sgs, the comparison is meaningless and the behavior
unpredictable. This can even end up to use local pointer which is to
NULL in this case.
If the local group has been skipped because of CPU affinity, we return
the idlest group.
Fixes: 57abff067a08 ("sched/fair: Rework find_idlest_group()")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: mingo@redhat.com
Cc: mgorman@suse.de
Cc: juri.lelli@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: bsegall@google.com
Cc: qais.yousef@arm.com
Link: https://lkml.kernel.org/r/1575483700-22153-1-git-send-email-vincent.guittot@linaro.org
|
|
The psi window size is a u64 an can be up to 10 seconds right now,
which exceeds the lower 32 bits of the variable. We currently use
div_u64 for it, which is meant only for 32-bit divisors. The result is
garbage pressure sampling values and even potential div0 crashes.
Use div64_u64.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
|
|
Jingfeng reports rare div0 crashes in psi on systems with some uptime:
[58914.066423] divide error: 0000 [#1] SMP
[58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O)
[58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1
[58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019
[58914.102728] Workqueue: events psi_update_work
[58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000
[58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330
[58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246
[58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640
[58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e
[58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000
[58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000
[58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78
[58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000
[58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0
[58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[58914.200360] PKRU: 55555554
[58914.203221] Stack:
[58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8
[58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000
[58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[58914.228734] Call Trace:
[58914.231337] [] psi_update_work+0x22/0x60
[58914.237067] [] process_one_work+0x189/0x420
[58914.243063] [] worker_thread+0x4e/0x4b0
[58914.248701] [] ? process_one_work+0x420/0x420
[58914.254869] [] kthread+0xe6/0x100
[58914.259994] [] ? kthread_park+0x60/0x60
[58914.265640] [] ret_from_fork+0x39/0x50
[58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1
[58914.279691] RIP [] psi_update_stats+0x1c1/0x330
The crashing instruction is trying to divide the observed stall time
by the sampling period. The period, stored in R8, is not 0, but we are
dividing by the lower 32 bits only, which are all 0 in this instance.
We could switch to a 64-bit division, but the period shouldn't be that
big in the first place. It's the time between the last update and the
next scheduled one, and so should always be around 2s and comfortably
fit into 32 bits.
The bug is in the initialization of new cgroups: we schedule the first
sampling event in a cgroup as an offset of sched_clock(), but fail to
initialize the last_update timestamp, and it defaults to 0. That
results in a bogusly large sampling period the first time we run the
sampling code, and consequently we underreport pressure for the first
2s of a cgroup's life. But worse, if sched_clock() is sufficiently
advanced on the system, and the user gets unlucky, the period's lower
32 bits can all be 0 and the sampling division will crash.
Fix this by initializing the last update timestamp to the creation
time of the cgroup, thus correctly marking the start of the first
pressure sampling period in a new cgroup.
Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
|
|
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes: 99d14d0e16fa ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
new patches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal management updates from Zhang Rui:
- Fix a deadlock regression in thermal core framework, which was
introduced in 5.3 (Wei Wang)
- Initialize thermal control framework earlier to enable thermal
mitigation during boot (Amit Kucheria)
- Convert the Intelligent Power Allocator (IPA) thermal governor to
follow the generic PM_EM instead of its own Energy Model (Quentin
Perret)
- Introduce a new Amlogic soc thermal driver (Guillaume La Roque)
- Add interrupt support for tsens thermal driver (Amit Kucheria)
- Add support for MSM8956/8976 in tsens thermal driver
(AngeloGioacchino Del Regno)
- Add support for r8a774b1 in rcar thermal driver (Biju Das)
- Add support for Thermal Monitor Unit v2 in qoriq thermal driver
(Yuantian Tang)
- Some other fixes/cleanups on thermal core framework and soc thermal
drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)
* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
thermal: Fix deadlock in thermal thermal_zone_device_check
thermal: cpu_cooling: Migrate to using the EM framework
thermal: cpu_cooling: Make the power-related code depend on IPA
PM / EM: Declare EM data types unconditionally
arm64: defconfig: Enable CONFIG_ENERGY_MODEL
drivers: thermal: tsens: fix potential integer overflow on multiply
thermal: cpu_cooling: Reorder the header file
thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
thermal: no need to set .owner when using module_platform_driver
thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
cpufreq: qcom-hw: Move driver initialization earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: Initialize cpufreq-dt driver earlier
cpufreq: Initialize the governors in core_initcall
thermal: Initialize thermal subsystem earlier
thermal: Remove netlink support
dt: thermal: tsens: Document compatible for MSM8976/56
thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
MAINTAINERS: add entry for Amlogic Thermal driver
thermal: amlogic: Add thermal driver to support G12 SoCs
...
|
