summaryrefslogtreecommitdiff
path: root/kernel/events/uprobes.c
AgeCommit message (Collapse)Author
2020-08-12mm/gup: remove task_struct pointer for all gup codePeter Xu
After the cleanup of page fault accounting, gup does not need to pass task_struct around any more. Remove that parameter in the whole gup stack. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/vmscan: protect the workingset on anonymous LRUJoonsoo Kim
In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-07-24uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix ↵Oleg Nesterov
GDB regression If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp() does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used to work when this code was written, but then GDB started to validate si_code and now it simply can't use breakpoints if the tracee has an active uprobe: # cat test.c void unused_func(void) { } int main(void) { return 0; } # gcc -g test.c -o test # perf probe -x ./test -a unused_func # perf record -e probe_test:unused_func gdb ./test -ex run GNU gdb (GDB) 10.0.50.20200714-git ... Program received signal SIGTRAP, Trace/breakpoint trap. 0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2 (gdb) The tracee hits the internal breakpoint inserted by GDB to monitor shared library events but GDB misinterprets this SIGTRAP and reports a signal. Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user() and fixes the problem. This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP), but this doesn't confuse GDB and needs another x86-specific patch. Reported-by: Aaron Merey <amerey@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge even more updates from Andrew Morton: - a kernel-wide sweep of show_stack() - pagetable cleanups - abstract out accesses to mmap_sem - prep for mmap_sem scalability work - hch's user acess work Subsystems affected by this patch series: debug, mm/pagemap, mm/maccess, mm/documentation. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (93 commits) include/linux/cache.h: expand documentation over __read_mostly maccess: return -ERANGE when probe_kernel_read() fails x86: use non-set_fs based maccess routines maccess: allow architectures to provide kernel probing directly maccess: move user access routines together maccess: always use strict semantics for probe_kernel_read maccess: remove strncpy_from_unsafe tracing/kprobes: handle mixed kernel/userspace probes better bpf: rework the compat kernel probe handling bpf:bpf_seq_printf(): handle potentially unsafe format string better bpf: handle the compat string in bpf_trace_copy_string better bpf: factor out a bpf_trace_copy_string helper maccess: unify the probe kernel arch hooks maccess: remove probe_read_common and probe_write_common maccess: rename strnlen_unsafe_user to strnlen_user_nofault maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault maccess: update the top of file comment maccess: clarify kerneldoc comments maccess: remove duplicate kerneldoc comments ...
2020-06-09uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly alignedOleg Nesterov
uprobe_write_opcode() must not cross page boundary; prepare_uprobe() relies on arch_uprobe_analyze_insn() which should validate "vaddr" but some architectures (csky, s390, and sparc) don't do this. We can remove the BUG_ON() check in prepare_uprobe() and validate the offset early in __uprobe_register(). The new IS_ALIGNED() check matches the alignment check in arch_prepare_kprobe() on supported architectures, so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE. Another problem is __update_ref_ctr() which was wrong from the very beginning, it can read/write outside of kmap'ed page unless "vaddr" is aligned to sizeof(short), __uprobe_register() should check this too. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08mm: rename flush_icache_user_range to flush_icache_user_pageChristoph Hellwig
The function currently known as flush_icache_user_range only operates on a single page. Rename it to flush_icache_user_page as we'll need the name flush_icache_user_range for something else soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20200515143646.3857579-20-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: delete unused lrucare handlingJohannes Weiner
Swapin faults were the last event to charge pages after they had already been put on the LRU list. Now that we charge directly on swapin, the lrucare portion of the charge code is unused. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Link: http://lkml.kernel.org/r/20200508183105.225460-19-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: convert anon and file-thp to new mem_cgroup_charge() APIJohannes Weiner
With the page->mapping requirement gone from memcg, we can charge anon and file-thp pages in one single step, right after they're allocated. This removes two out of three API calls - especially the tricky commit step that needed to happen at just the right time between when the page is "set up" and when it's "published" - somewhat vague and fluid concepts that varied by page type. All we need is a freshly allocated page and a memcg context to charge. v2: prevent double charges on pre-allocated hugepages in khugepaged [hannes@cmpxchg.org: Fix crash - *hpage could be ERR_PTR instead of NULL] Link: http://lkml.kernel.org/r/20200512215813.GA487759@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/20200508183105.225460-13-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: switch to native NR_ANON_MAPPED counterJohannes Weiner
Memcg maintains a private MEMCG_RSS counter. This divergence from the generic VM accounting means unnecessary code overhead, and creates a dependency for memcg that page->mapping is set up at the time of charging, so that page types can be told apart. Convert the generic accounting sites to mod_lruvec_page_state and friends to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED. We use lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the same way we do for NR_FILE_MAPPED. With the previous patch removing MEMCG_CACHE and the private NR_SHMEM counter, this patch finally eliminates the need to have page->mapping set up at charge time. However, we need to have page->mem_cgroup set up by the time rmap runs and does the accounting, so switch the commit and the rmap callbacks around. v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo) Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03mm: memcontrol: drop @compound parameter from memcg charging APIJohannes Weiner
The memcg charging API carries a boolean @compound parameter that tells whether the page we're dealing with is a hugepage. mem_cgroup_commit_charge() has another boolean @lrucare that indicates whether the page needs LRU locking or not while charging. The majority of callsites know those parameters at compile time, which results in a lot of naked "false, false" argument lists. This makes for cryptic code and is a breeding ground for subtle mistakes. Thankfully, the huge page state can be inferred from the page itself and doesn't need to be passed along. This is safe because charging completes before the page is published and somebody may split it. Simplify the callsites by removing @compound, and let memcg infer the state by using hpage_nr_pages() unconditionally. That function does PageTransHuge() to identify huge pages, which also helpfully asserts that nobody passes in tail pages by accident. The following patches will introduce a new charging API, best not to carry over unnecessary weight. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-4-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01mm/mmap.c: use IS_ERR_VALUE to check return value of get_unmapped_areaGaowei Pu
get_unmapped_area() returns an address or -errno on failure. Historically we have checked for the failure by offset_in_page() which is correct but quite hard to read. Newer code started using IS_ERR_VALUE which is much easier to read. Convert remaining users of offset_in_page as well. [mhocko@suse.com: rewrite changelog] [mhocko@kernel.org: fix mremap.c and uprobes.c sites also] Link: http://lkml.kernel.org/r/20191012102512.28051-1-pugaowei@gmail.com Signed-off-by: Gaowei Pu <pugaowei@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Qian Cai <cai@lca.pw> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe registerSong Liu
Attaching uprobe to text section in THP splits the PMD mapped page table into PTE mapped entries. On uprobe detach, we would like to regroup PMD mapped page table entry to regain performance benefit of THP. However, the regroup is broken For perf_event based trace_uprobe. This is because perf_event based trace_uprobe calls uprobe_unregister twice on close: first in TRACE_REG_PERF_CLOSE, then in TRACE_REG_PERF_UNREGISTER. The second call will split the PMD mapped page table entry, which is not the desired behavior. Fix this by only use FOLL_SPLIT_PMD for uprobe register case. Add a WARN() to confirm uprobe unregister never work on huge pages, and abort the operation when this WARN() triggers. Link: http://lkml.kernel.org/r/20191017164223.2762148-6-songliubraving@fb.com Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT") Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24uprobe: collapse THP pmd after removing all uprobesSong Liu
After all uprobes are removed from the huge page (with PTE pgtable), it is possible to collapse the pmd and benefit from THP again. This patch does the collapse by calling collapse_pte_mapped_thp(). Link: http://lkml.kernel.org/r/20190815164525.1848545-7-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLITSong Liu
Use the newly added FOLL_SPLIT_PMD in uprobe. This preserves the huge page when the uprobe is enabled. When the uprobe is disabled, newer instances of the same application could still benefit from huge page. For the next step, we will enable khugepaged to regroup the pmd, so that existing instances of the application could also benefit from huge page after the uprobe is disabled. Link: http://lkml.kernel.org/r/20190815164525.1848545-5-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24uprobe: use original page when all uprobes are removedSong Liu
Currently, uprobe swaps the target page with a anonymous page in both install_breakpoint() and remove_breakpoint(). When all uprobes on a page are removed, the given mm is still using an anonymous page (not the original page). This patch allows uprobe to use original page when possible (all uprobes on the page are already removed, and the original page is in page cache and uptodate). As suggested by Oleg, we unmap the old_page and let the original page fault in. Link: http://lkml.kernel.org/r/20190815164525.1848545-3-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-05-28uprobes: Use DEFINE_STATIC_PERCPU_RWSEM() to initialize dup_mmap_semOleg Nesterov
Use DEFINE_STATIC_PERCPU_RWSEM() to initialize dup_mmap_sem. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-14mm/mmu_notifier: use correct mmu_notifier events for each invalidationJérôme Glisse
This updates each existing invalidation to use the correct mmu notifier event that represent what is happening to the CPU page table. See the patch which introduced the events to see the rational behind this. Link: http://lkml.kernel.org/r/20190326164747.24405-7-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/mmu_notifier: contextual information for event triggering invalidationJérôme Glisse
CPU page table update can happens for many reasons, not only as a result of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as a result of kernel activities (memory compression, reclaim, migration, ...). Users of mmu notifier API track changes to the CPU page table and take specific action for them. While current API only provide range of virtual address affected by the change, not why the changes is happening. This patchset do the initial mechanical convertion of all the places that calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP event as well as the vma if it is know (most invalidation happens against a given vma). Passing down the vma allows the users of mmu notifier to inspect the new vma page protection. The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier should assume that every for the range is going away when that event happens. A latter patch do convert mm call path to use a more appropriate events for each call. This is done as 2 patches so that no call site is forgotten especialy as it uses this following coccinelle patch: %<---------------------------------------------------------------------- @@ identifier I1, I2, I3, I4; @@ static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1, +enum mmu_notifier_event event, +unsigned flags, +struct vm_area_struct *vma, struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... } @@ @@ -#define mmu_notifier_range_init(range, mm, start, end) +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end) @@ expression E1, E3, E4; identifier I1; @@ <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, I1, I1->vm_mm, E3, E4) ...> @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(..., struct vm_area_struct *VMA, ...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN, VMA; @@ FN(...) { struct vm_area_struct *VMA; <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, VMA, E2, E3, E4) ...> } @@ expression E1, E2, E3, E4; identifier FN; @@ FN(...) { <... mmu_notifier_range_init(E1, +MMU_NOTIFY_UNMAP, 0, NULL, E2, E3, E4) ...> } ---------------------------------------------------------------------->% Applied with: spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place spatch --sp-file mmu-notifier.spatch --dir mm --in-place Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-30uprobes: Initialize uprobes earlierNadav Amit
In order to have a separate address space for text poking, we need to duplicate init_mm early during start_kernel(). This, however, introduces a problem since uprobes functions are called from dup_mmap(), but uprobes is still not initialized in this early stage. Since uprobes initialization is necassary for fork, and since all the dependant initialization has been done when fork is initialized (percpu and vmalloc), move uprobes initialization to fork_init(). It does not seem uprobes introduces any security problem for the poking_mm. Crash and burn if uprobes initialization fails, similarly to other early initializations. Change the init_probes() name to probes_init() to match other early initialization functions name convention. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: ard.biesheuvel@linaro.org Cc: deneen.t.dock@intel.com Cc: kernel-hardening@lists.openwall.com Cc: kristen@linux.intel.com Cc: linux_dti@icloud.com Cc: will.deacon@arm.com Link: https://lkml.kernel.org/r/20190426232303.28381-6-nadav.amit@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-11Merge tag 'trace-v5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The biggest change for this release is in the histogram code: - Add "onchange(var)" histogram handler that executes a action when $var changes. - Add new "snapshot()" action for histogram handlers, that causes a snapshot of the ring buffer when triggered. ie. onchange(var).snapshot() will trigger a snapshot if var changes. - Add alternative for "trace()" action. Currently, to trigger a synthetic event, the name of that event is used as the handler name, which is inconsistent with the other actions. onchange(var).synthetic(param) where it can now be onchange(var).trace(synthetic, param). The older method will still be allowed, as long as the synthetic events do not overlap with other handler names. - The histogram documentation at testcases were updated for the new changes. Outside of the histogram code, we have: - Added a quicker way to enable set_ftrace_filter files, that will make it much quicker to bisect tracing a function that shouldn't be traced and crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it will select the corresponding function that is in available_filter_functions). - Some better displaying of the tracing data (and more information was added). The rest are small fixes and more clean ups to the code" * tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits) tracing: Use strncpy instead of memcpy when copying comm in trace.c tracing: Use strncpy instead of memcpy when copying comm for hist triggers tracing: Use strncpy instead of memcpy for string keys in hist triggers tracing: Use str_has_prefix() in synth_event_create() x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace() tracing/perf: Use strndup_user() instead of buggy open-coded version doc: trace: Fix documentation for uprobe_profile tracing: Fix spelling mistake: "analagous" -> "analogous" tracing: Comment why cond_snapshot is checked outside of max_lock protection tracing: Add hist trigger action 'expected fail' test case tracing: Add alternative synthetic event trace action test case tracing: Add hist trigger onchange() handler test case tracing: Add hist trigger snapshot() action test case tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases tracing: Add alternative synthetic event trace action syntax tracing: Add hist trigger onchange() handler Documentation tracing: Add hist trigger onchange() handler tracing: Add hist trigger snapshot() action Documentation tracing: Add hist trigger snapshot() action tracing: Add conditional snapshot ...
2019-02-15uprobes: convert uprobe.ref to refcount_tElena Reshetova
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable uprobe.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. **Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon in state to be merged to the documentation tree. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the uprobe.ref it might make a difference in following places: - put_uprobe(): decrement in refcount_dec_and_test() only provides RELEASE ordering and control dependency on success vs. fully ordered atomic counterpart Link: http://lkml.kernel.org/r/1547637627-29526-1-git-send-email-elena.reshetova@intel.com Suggested-by: Kees Cook <keescook@chromium.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-02-04perf/uprobes: Convert to SPDX license identifierThomas Gleixner
Replace the license boiler plate with a SPDX license identifier. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul McKenney <paulmck@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190116111308.211981422@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-28mm/mmu_notifier: use structure for invalidate_range_start/end calls v2Jérôme Glisse
To avoid having to change many call sites everytime we want to add a parameter use a structure to group all parameters for the mmu_notifier invalidate_range_start/end cakks. No functional changes with this patch. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> From: Jérôme Glisse <jglisse@redhat.com> Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3 fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06Merge tag 'trace-v4.20-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "This is a single commit that fixes a bug in uprobes SDT code due to a missing mutex protection" * tag 'trace-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: Uprobes: Fix kernel oops with delayed_uprobe_remove()
2018-12-05Uprobes: Fix kernel oops with delayed_uprobe_remove()Ravi Bangoria
There could be a race between task exit and probe unregister: exit_mm() mmput() __mmput() uprobe_unregister() uprobe_clear_state() put_uprobe() delayed_uprobe_remove() delayed_uprobe_remove() put_uprobe() is calling delayed_uprobe_remove() without taking delayed_uprobe_lock and thus the race sometimes results in a kernel crash. Fix this by taking delayed_uprobe_lock before calling delayed_uprobe_remove() from put_uprobe(). Detailed crash log can be found at: Link: http://lkml.kernel.org/r/000000000000140c370577db5ece@google.com Link: http://lkml.kernel.org/r/20181205033423.26242-1-ravi.bangoria@linux.ibm.com Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reported-by: syzbot+cb1fb754b771caca0a88@syzkaller.appspotmail.com Fixes: 1cc33161a83d ("uprobes: Support SDT markers having reference count (semaphore)") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-23uprobes: Fix handle_swbp() vs. unregister() + register() race once moreAndrea Parri
Commit: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@kernel.org Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-30Merge tag 'trace-v4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The biggest change here is the updates to kprobes Back in January I posted patches to create function based events. These were the events that you suggested I make to allow developers to easily create events in code where no trace event exists. After posting those changes for review, it was suggested that we implement this instead with kprobes. The problem with kprobes is that the interface is too complex and needs to be simplified. Masami Hiramatsu posted patches in March and I've been playing with them a bit. There's been a bit of clean up in the kprobe code that was inspired by the function based event patches, and a couple of enhancements to the kprobe event interface. - If the arch supports it (we added support for x86), you can place a kprobe event at the start of a function and use $arg1, $arg2, etc to reference the arguments of a function. (Before you needed to know what register or where on the stack the argument was). - The second is a way to see array of events. For example, if you reference a mac address, you can add: echo 'p:mac ip_rcv perm_addr=+574($arg2):x8[6]' > kprobe_events And this will produce: mac: (ip_rcv+0x0/0x140) perm_addr={0x52,0x54,0x0,0xc0,0x76,0xec} Other changes include - Exporting trace_dump_stack to modules - Have the stack tracer trace the entire stack (stop trying to remove tracing itself, as we keep removing too much). - Added support for SDT in uprobes" [ SDT - "Statically Defined Tracing" are userspace markers for tracing. Let's not use random TLA's in explanations unless they are fairly well-established as generic (at least for kernel people) - Linus ] * tag 'trace-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits) tracing: Have stack tracer trace full stack tracing: Export trace_dump_stack to modules tracing: probeevent: Fix uninitialized used of offset in parse args tracing/kprobes: Allow kprobe-events to record module symbol tracing/kprobes: Check the probe on unloaded module correctly tracing/uprobes: Fix to return -EFAULT if copy_from_user failed tracing: probeevent: Add $argN for accessing function args x86: ptrace: Add function argument access API tracing: probeevent: Add array type support tracing: probeevent: Add symbol type tracing: probeevent: Unify fetch_insn processing common part tracing: probeevent: Append traceprobe_ for exported function tracing: probeevent: Return consumed bytes of dynamic area tracing: probeevent: Unify fetch type tables tracing: probeevent: Introduce new argument fetching code tracing: probeevent: Remove NOKPROBE_SYMBOL from print functions tracing: probeevent: Cleanup argument field definition tracing: probeevent: Cleanup print argument functions trace_uprobe: support reference counter in fd-based uprobe perf probe: Support SDT markers having reference counter (semaphore) ...
2018-09-24uprobes/sdt: Prevent multiple reference counter for same uprobeRavi Bangoria
We assume to have only one reference counter for one uprobe. Don't allow user to register multiple uprobes having same inode+offset but different reference counter. Link: http://lkml.kernel.org/r/20180820044250.11659-3-ravi.bangoria@linux.ibm.com Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-24uprobes: Support SDT markers having reference count (semaphore)Ravi Bangoria
Userspace Statically Defined Tracepoints[1] are dtrace style markers inside userspace applications. Applications like PostgreSQL, MySQL, Pthread, Perl, Python, Java, Ruby, Node.js, libvirt, QEMU, glib etc have these markers embedded in them. These markers are added by developer at important places in the code. Each marker source expands to a single nop instruction in the compiled code but there may be additional overhead for computing the marker arguments which expands to couple of instructions. In case the overhead is more, execution of it can be omitted by runtime if() condition when no one is tracing on the marker: if (reference_counter > 0) { Execute marker instructions; } Default value of reference counter is 0. Tracer has to increment the reference counter before tracing on a marker and decrement it when done with the tracing. Implement the reference counter logic in core uprobe. User will be able to use it from trace_uprobe as well as from kernel module. New trace_uprobe definition with reference counter will now be: <path>:<offset>[(ref_ctr_offset)] where ref_ctr_offset is an optional field. For kernel module, new variant of uprobe_register() has been introduced: uprobe_register_refctr(inode, offset, ref_ctr_offset, consumer) No new variant for uprobe_unregister() because it's assumed to have only one reference counter for one uprobe. [1] https://sourceware.org/systemtap/wiki/UserSpaceProbeImplementation Note: 'reference counter' is called as 'semaphore' in original Dtrace (or Systemtap, bcc and even in ELF) documentation and code. But the term 'semaphore' is misleading in this context. This is just a counter used to hold number of tracers tracing on a marker. This is not really used for any synchronization. So we are calling it a 'reference counter' in kernel / perf code. Link: http://lkml.kernel.org/r/20180820044250.11659-2-ravi.bangoria@linux.ibm.com Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> [Only trace_uprobe.c] Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Song Liu <songliubraving@fb.com> Tested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-11signal: Properly deliver SIGILL from uprobesEric W. Biederman
For userspace to tell the difference between a random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current) with force_sig(SIG_ILL, current) which gets this right and is shorter and easier to type. Fixes: 014940bad8e4 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails") Fixes: 0b5256c7f173 ("uprobes: Send SIGILL if handle_trampoline() fails") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-08-20Merge tag 'trace-v4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Restructure of lockdep and latency tracers This is the biggest change. Joel Fernandes restructured the hooks from irqs and preemption disabling and enabling. He got rid of a lot of the preprocessor #ifdef mess that they caused. He turned both lockdep and the latency tracers to use trace events inserted in the preempt/irqs disabling paths. But unfortunately, these started to cause issues in corner cases. Thus, parts of the code was reverted back to where lockdep and the latency tracers just get called directly (without using the trace events). But because the original change cleaned up the code very nicely we kept that, as well as the trace events for preempt and irqs disabling, but they are limited to not being called in NMIs. - Have trace events use SRCU for "rcu idle" calls. This was required for the preempt/irqs off trace events. But it also had to not allow them to be called in NMI context. Waiting till Paul makes an NMI safe SRCU API. - New notrace SRCU API to allow trace events to use SRCU. - Addition of mcount-nop option support - SPDX headers replacing GPL templates. - Various other fixes and clean ups. - Some fixes are marked for stable, but were not fully tested before the merge window opened. * tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) tracing: Fix SPDX format headers to use C++ style comments tracing: Add SPDX License format tags to tracing files tracing: Add SPDX License format to bpf_trace.c blktrace: Add SPDX License format header s390/ftrace: Add -mfentry and -mnop-mcount support tracing: Add -mcount-nop option support tracing: Avoid calling cc-option -mrecord-mcount for every Makefile tracing: Handle CC_FLAGS_FTRACE more accurately Uprobe: Additional argument arch_uprobe to uprobe_write_opcode() Uprobes: Simplify uprobe_register() body tracepoints: Free early tracepoints after RCU is initialized uprobes: Use synchronize_rcu() not synchronize_sched() tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister() ftrace: Remove unused pointer ftrace_swapper_pid tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing/irqsoff: Handle preempt_count for different configs tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage" tracing: irqsoff: Account for additional preempt_disable trace: Use rcu_dereference_raw for hooks from trace-event subsystem tracing/kprobes: Fix within_notrace_func() to check only notrace functions ...
2018-08-13Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()Ravi Bangoria
Add addition argument 'arch_uprobe' to uprobe_write_opcode(). We need this in later set of patches. Link: http://lkml.kernel.org/r/20180809041856.1547-3-ravi.bangoria@linux.ibm.com Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-13Uprobes: Simplify uprobe_register() bodyRavi Bangoria
Simplify uprobe_register() function body and let __uprobe_register() handle everything. Also move dependency functions around to avoid build failures. Link: http://lkml.kernel.org/r/20180809041856.1547-2-ravi.bangoria@linux.ibm.com Reviewed-by: Song Liu <songliubraving@fb.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-16perf, tools: Use correct articles in commentsTobias Tefke
Some of the comments in the perf events code use articles incorrectly, using 'a' for words beginning with a vowel sound, where 'an' should be used. Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: jolsa@redhat.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com [ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-26tracing: Remove igrab() iput() call from uprobes.cSong Liu
Caller of uprobe_register is required to keep the inode and containing mount point referenced. There was misuse of igrab() in uprobes.c and trace_uprobe.c. This is because igrab() will not prevent umount of the containing mount point. To fix this, we added path to struct trace_uprobe, which keeps the inode and containing mount reference. For uprobes.c, it is not necessary to call igrab() in uprobe_register(), as the caller is required to keep the inode reference. The igrab() is removed and comments on this requirement is added to uprobe_register(). Link: http://lkml.kernel.org/r/CAELBmZB2XX=qEOLAdvGG4cPx4GEntcSnWQquJLUK1ongRj35cA@mail.gmail.com Link: http://lkml.kernel.org/r/20180423172135.4050588-2-songliubraving@fb.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Howard McLauchlan <hmclauchlan@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-04uprobes: Remove now-redundant smp_read_barrier_depends()Paul E. McKenney
Now that READ_ONCE() implies smp_read_barrier_depends(), the get_xol_area() and get_trampoline_vaddr() no longer need their smp_read_barrier_depends() calls, which this commit removes. While we are here, convert the corresponding smp_wmb() to an smp_store_release(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-08-31mm, uprobes: fix multiple free of ->uprobes_state.xol_areaEric Biggers
Commit 7c051267931a ("mm, fork: make dup_mmap wait for mmap_sem for write killable") made it possible to kill a forking task while it is waiting to acquire its ->mmap_sem for write, in dup_mmap(). However, it was overlooked that this introduced an new error path before the new mm_struct's ->uprobes_state.xol_area has been set to NULL after being copied from the old mm_struct by the memcpy in dup_mm(). For a task that has previously hit a uprobe tracepoint, this resulted in the 'struct xol_area' being freed multiple times if the task was killed at just the right time while forking. Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather than in uprobe_dup_mmap(). With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C program given by commit 2b7e8665b4ff ("fork: fix incorrect fput of ->exe_file causing use-after-free"), provided that a uprobe tracepoint has been set on the fork_thread() function. For example: $ gcc reproducer.c -o reproducer -lpthread $ nm reproducer | grep fork_thread 0000000000400719 t fork_thread $ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events $ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable $ ./reproducer Here is the use-after-free reported by KASAN: BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200 Read of size 8 at addr ffff8800320a8b88 by task reproducer/198 CPU: 1 PID: 198 Comm: reproducer Not tainted 4.13.0-rc7-00015-g36fde05f3fb5 #255 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Call Trace: dump_stack+0xdb/0x185 print_address_description+0x7e/0x290 kasan_report+0x23b/0x350 __asan_report_load8_noabort+0x19/0x20 uprobe_clear_state+0x1c4/0x200 mmput+0xd6/0x360 do_exit+0x740/0x1670 do_group_exit+0x13f/0x380 get_signal+0x597/0x17d0 do_signal+0x99/0x1df0 exit_to_usermode_loop+0x166/0x1e0 syscall_return_slowpath+0x258/0x2c0 entry_SYSCALL_64_fastpath+0xbc/0xbe ... Allocated by task 199: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xfc/0x180 kmem_cache_alloc_trace+0xf3/0x330 __create_xol_area+0x10f/0x780 uprobe_notify_resume+0x1674/0x2210 exit_to_usermode_loop+0x150/0x1e0 prepare_exit_to_usermode+0x14b/0x180 retint_user+0x8/0x20 Freed by task 199: save_stack_trace+0x1b/0x20 kasan_slab_free+0xa8/0x1a0 kfree+0xba/0x210 uprobe_clear_state+0x151/0x200 mmput+0xd6/0x360 copy_process.part.8+0x605f/0x65d0 _do_fork+0x1a5/0xbd0 SyS_clone+0x19/0x20 do_syscall_64+0x22f/0x660 return_from_SYSCALL_64+0x0/0x7a Note: without KASAN, you may instead see a "Bad page state" message, or simply a general protection fault. Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com Fixes: 7c051267931a ("mm, fork: make dup_mmap wait for mmap_sem for write killable") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [4.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/coredump.h> We are going to split <linux/sched/coredump.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/coredump.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/mm.h> We are going to split <linux/sched/mm.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/mm.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27mm: use mmget_not_zero() helperVegard Nossum
We already have the helper, we can convert the rest of the kernel mechanically using: git grep -l 'atomic_inc_not_zero.*mm_users' | xargs sed -i 's/atomic_inc_not_zero(&\(.*\)->mm_users)/mmget_not_zero\(\1\)/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. Link: http://lkml.kernel.org/r/20161218123229.22952-3-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24mm, uprobes: convert __replace_page() to use page_vma_mapped_walk()Kirill A. Shutemov
For consistency, it worth converting all page_check_address() to page_vma_mapped_walk(), so we could drop the former. Link: http://lkml.kernel.org/r/20170129173858.45174-10-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:13:51 +0000