summaryrefslogtreecommitdiff
path: root/kernel/debug/kdb
AgeCommit message (Collapse)Author
2012-10-13Merge tag 'for_linus-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "Cleanups - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c - Add module event hooks for simplified debugging with gdb Fixes - Fix kdb to stop paging with 'q' on bta and dmesg - Fix for data that scrolls off the vga console due to line wrapping when using the kdb pager New - The debug core registers for kernel module events which allows a kernel aware gdb to automatically load symbols and break on entry to a kernel module - Allow kgdboc=kdb to setup kdb on the vga console" * tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: tty/console: fix warnings in drivers/tty/serial/kgdboc.c kdb,vt_console: Fix missed data due to pager overruns kdb: Fix dmesg/bta scroll to quit with 'q' kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell kgdb,x86: fix warning about unused variable mips,kgdb: fix recursive page fault with CONFIG_KPROBES kgdb: Add module event hooks
2012-10-12kdb,vt_console: Fix missed data due to pager overrunsJason Wessel
It is possible to miss data when using the kdb pager. The kdb pager does not pay attention to the maximum column constraint of the screen or serial terminal. This result is not incrementing the shown lines correctly and the pager will print more lines that fit on the screen. Obviously that is less than useful when using a VGA console where you cannot scroll back. The pager will now look at the kdb_buffer string to see how many characters are printed. It might not be perfect considering you can output ASCII that might move the cursor position, but it is a substantially better approximation for viewing dmesg and trace logs. This also means that the vt screen needs to set the kdb COLUMNS variable. Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12kdb: Fix dmesg/bta scroll to quit with 'q'Jason Wessel
If you press 'q' the pager should exit instead of printing everything from dmesg which can really bog down a 9600 baud serial link. The same is true for the bta command. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-09-26kdb: Implement disable_nmi commandAnton Vorontsov
This command disables NMI-entry. If NMI source has been previously shared with a serial console ("debug port"), this effectively releases the port from KDB exclusive use, and makes the console available for normal use. Of course, NMI can be reenabled, enable_nmi modparam is used for that: echo 1 > /sys/module/kdb/parameters/enable_nmi Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-31kernel/debug: Make use of KGDB_REASON_NMIAnton Vorontsov
Currently kernel never set KGDB_REASON_NMI. We do now, when we enter KGDB/KDB from an NMI. This is not to be confused with kgdb_nmicallback(), NMI callback is an entry for the slave CPUs during CPUs roundup, but REASON_NMI is the entry for the master CPU. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-31kdb: Remove cpu from the more promptJason Wessel
Having the CPU in the more prompt is completely redundent vs the standard kdb prompt, and it also wastes 32 bytes on the stack. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-31kdb: Remove unused KDB_FLAG_ONLY_DO_DUMPJason Wessel
This code cleanup was missed in the original kdb merge, and this code is simply not used at all. The code that was previously used to set the KDB_FLAG_ONLY_DO_DUMP was removed prior to the initial kdb merge. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-07-21kdb: Switch to nolock variants of kmsg_dump functionsAnton Vorontsov
The locked variants are prone to deadlocks (suppose we got to the debugger w/ the logbuf lock held), so let's switch to nolock variants. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21printk: Remove kdb_syslog_dataAnton Vorontsov
The function is no longer needed, so remove it. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-21kdb: Revive dmesg commandAnton Vorontsov
The kgdb dmesg command is broken after the printk rework. The old logic in kdb code makes no sense in terms of current printk/logging storage format, and KDB simply hangs forever. This patch revives the command by switching to kmsg_dumper iterator. The code is now much more simpler and shorter. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-04Merge tag 'for_linus-3.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB regression fixes from Jason Wessel: - Fix a Smatch warning that appeared in the 3.4 merge window - Fix kgdb test suite with SMP for all archs without HW single stepping - Fix kgdb sw breakpoints with CONFIG_DEBUG_RODATA=y limitations on x86 - Fix oops on kgdb test suite with CONFIG_DEBUG_RODATA - Fix kgdb test suite with SMP for all archs with HW single stepping * tag 'for_linus-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: x86,kgdb: Fix DEBUG_RODATA limitation using text_poke() kgdb,debug_core: pass the breakpoint struct instead of address and memory kgdbts: (2 of 2) fix single step awareness to work correctly with SMP kgdbts: (1 of 2) fix single step awareness to work correctly with SMP kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA kdb: Fix smatch warning on dbg_io_ops->is_console
2012-03-29kdb: Fix smatch warning on dbg_io_ops->is_consoleJason Wessel
The Smatch tool warned that the change from commit b8adde8dd (kdb: Avoid using dbg_io_ops until it is initialized) should add another null check later in the kdb_printf(). It is worth noting that the second use of dbg_io_ops->is_console is protected by the KDB_PAGER state variable which would only get set when kdb is fully active and initialized. If we ever encounter changes or defects in the KDB_PAGER state we do not want to crash the kernel in a kdb_printf/printk. CC: Tim Bird <tim.bird@am.sony.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-23Merge tag 'for_linus-3.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB updates from Jason Wessel: "Fixes: - Fix KDB keyboard repeat scan codes and leaked keyboard events - Fix kernel crash with kdb_printf() for users who compile new kdb_printf()'s in early code - Return all segment registers to gdb on x86_64 Features: - KDB/KGDB hook the reboot notifier and end user can control if it stops, detaches or does nothing (updated docs as well) - Notify users who use CONFIG_DEBUG_RODATA to use hw breakpoints" * tag 'for_linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Add message about CONFIG_DEBUG_RODATA on failure to install breakpoint kdb: Avoid using dbg_io_ops until it is initialized kgdb,debug_core: add the ability to control the reboot notifier KDB: Fix usability issues relating to the 'enter' key. kgdb,debug-core,gdbstub: Hook the reboot notifier for debugger detach kgdb: Respect that flush op is optional kgdb: x86: Return all segment registers also in 64-bit mode
2012-03-22kdb: Add message about CONFIG_DEBUG_RODATA on failure to install breakpointJason Wessel
On x86, if CONFIG_DEBUG_RODATA is set, one cannot set breakpoints via KDB. Apparently this is a well-known problem, as at least one distribution now ships with both KDB enabled and CONFIG_DEBUG_RODATA=y for security reasons. This patch adds an printk message to the breakpoint failure case, in order to provide suggestions about how to use the debugger. Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Tim Bird <tim.bird@am.sony.com>
2012-03-22kdb: Avoid using dbg_io_ops until it is initializedTim Bird
This fixes a bug with setting a breakpoint during kdb initialization (from kdb_cmds). Any call to kdb_printf() before the initialization of the kgdboc serial console driver (which happens much later during bootup than kdb_init), results in kernel panic due to the use of dbg_io_ops before it is initialized. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-22KDB: Fix usability issues relating to the 'enter' key.Andrei Warkentin
This fixes the following problems: 1) Typematic-repeat of 'enter' gives warning message and leaks make/break if KDB exits. Repeats look something like 0x1c 0x1c .... 0x9c 2) Use of 'keypad enter' gives warning message and leaks the ENTER break/make code out if KDB exits. KP ENTER repeats look someting like 0xe0 0x1c 0xe0 0x1c ... 0xe0 0x9c. 3) Lag on the order of seconds between "break" and "make" when expecting the enter "break" code. Seen under virtualized environments such as VMware ESX. The existing special enter handler tries to glob the enter break code, but this fails if the other (KP) enter was used, or if there was a key repeat. It also fails if you mashed some keys along with enter, and you ended up with a non-enter make or non-enter break code coming after the enter make code. So first, we modify the handler to handle these cases. But performing these actions on every enter is annoying since now you can't hold ENTER down to scroll <more>d messages in KDB. Since this special behaviour is only necessary to handle the exiting KDB ('g' + ENTER) without leaking scancodes to the OS. This cleanup needs to get executed anytime the kdb_main loop exits. Tested on QEMU. Set a bp on atkbd.c to verify no scan code was leaked. Cc: Andrei Warkentin <andreiw@vmware.com> [jason.wessel@windriver.com: move cleanup calls to kdb_main.c] Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-03-20kdb: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-01-13module: struct module_ref should contains long fieldsEric Dumazet
module_ref contains two "unsigned int" fields. Thats now too small, since some machines can open more than 2^32 files. Check commit 518de9b39e8 (fs: allow for more than 2^31 files) for reference. We can add an aligned(2 * sizeof(unsigned long)) attribute to force alloc_percpu() allocating module_ref areas in single cache lines. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Tejun Heo <tj@kernel.org> CC: Robin Holt <holt@sgi.com> CC: David Miller <davem@davemloft.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-11kdb: Make KDB use the new is_idle_task() APIPaul E. McKenney
Change from direct comparison of ->pid with zero to is_idle_task(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-10-31kernel: Fix files explicitly needing EXPORT_SYMBOL infrastructurePaul Gortmaker
These files were getting <linux/module.h> via an implicit non-obvious path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-01kdb,kgdb: Allow arbitrary kgdb magic knock sequencesJason Wessel
The first packet that gdb sends when the kernel is in kdb mode seems to change with every release of gdb. Instead of continuing to add many different gdb packets, change kdb to automatically look for any thing that looks like a gdb packet. Example 1 cold start test: echo g > /proc/sysrq-trigger $D#44+ Example 2 cold start test: echo g > /proc/sysrq-trigger $3#33 The second one should re-enter kdb's shell right away and is purely a test. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01kdb: Remove all references to DOING_KGDB2Jason Wessel
The DOING_KGDB2 was originally a state variable for one of the two ways to automatically transition from kdb to kgdb. Purge all these variables and just use one single state for the transition. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01kdb,kgdb: Implement switch and pass buffer from kdb -> gdbJason Wessel
When switching from kdb mode to kgdb mode packets were getting lost depending on the size of the fifo queue of the serial chip. When gdb initially connects if it is in kdb mode it should entirely send any character buffer over to the gdbstub when switching connections. Previously kdb was zero'ing out the character buffer and this could lead to gdb failing to connect at all, or a lengthy pause could occur on the initial connect. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01kdb: cleanup unused variables missed in the original kdb mergeJason Wessel
The BTARGS and BTSYMARG variables do not have any function in the mainline version of kdb. Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-25kdb: add usage string of 'per_cpu' commandNamhyung Kim
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-25kdb: code cleanup to use macro instead of valueJovi Zhang
It's better to use macro KDB_BASE_CMD_MAX instead of 50 Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-11-17kdb: fix crash when KDB_BASE_CMD_MAX is exceededJovi Zhang
When the number of dyanmic kdb commands exceeds KDB_BASE_CMD_MAX, the kernel will fault. Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-11-17kdb: fix memory leak in kdb_main.cJovi Zhang
Call kfree in the error path as well as the success path in kdb_ll(). Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-29kdb: Fix early debugging crash regressionJason Wessel
The kdb_current legally be equal to NULL in the early boot of the x86 arch. The problem pcan be observed by booting with the kernel arguments: earlyprintk=vga ekgdboc=kbd kgdbwait The kdb shell will oops on entry and recursively fault because it cannot get past the final stage of shell initialization. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29kdb: fix per_cpu command to remove supress maskJason Wessel
Rusty pointed out that the per_cpu command uses up lots of space on the stack and the cpu supress mask is probably not needed. This patch removes the need for the supress mask as well as fixing up the following problems with the kdb per_cpu command: * The per_cpu command should allow an address as an argument * When you have more data than can be displayed on one screen allow the user to break out of the print loop. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-22kdb,debug_core: adjust master cpu switch logic against new debug_core lockingJason Wessel
The kdb shell needs to enforce switching back to the original CPU that took the exception before restoring normal kernel execution. Resuming from a different CPU than what took the original exception will cause problems with spin locks that are freed from the a different processor than had taken the lock. The special logic in dbg_cpu_switch() can go away entirely with because the state of what cpus want to be masters or slaves will remain unchanged between entry and exit of the debug_core exception context. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-22kdb,kgdb: fix sparse fixupsJason Wessel
Fix the following sparse warnings: kdb_main.c:328:5: warning: symbol 'kdbgetu64arg' was not declared. Should it be static? kgdboc.c:246:12: warning: symbol 'kgdboc_early_init' was not declared. Should it be static? kgdb.c:652:26: warning: incorrect type in argument 1 (different address spaces) kgdb.c:652:26: expected void const *ptr kgdb.c:652:26: got struct perf_event *[noderef] <asn:3>*pev The one in kgdb.c required the (void * __force) because of the return code from register_wide_hw_breakpoint looking like: return (void __percpu __force *)ERR_PTR(err); Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-22kdb: Fix oops in kdb_unregisterJason Wessel
Nothing should try to use kdb_commands directly as sometimes it is null. Instead, use the for_each_kdbcmd() iterator. This particular problem dates back to the initial kdb merge (2.6.35), but at that point nothing was dynamically unregistering commands from the kdb shell. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-22kdb: Allow kernel loadable modules to add kdb shell functionsJason Wessel
In order to allow kernel modules to dynamically add a command to the kdb shell the kdb_register, kdb_register_repeat, kdb_unregister, and kdb_printf need to be exported as GPL symbols. Any kernel module that adds a dynamic kdb shell function should only need to include linux/kdb.h. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-09-08Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: gcc-4.6: kernel/*: Fix unused but set warnings mutex: Fix annotations to include it in kernel-locking docbook pid: make setpgid() system call use RCU read-side critical section MAINTAINERS: Add RCU's public git tree
2010-09-05gcc-4.6: kernel/*: Fix unused but set warningsAndi Kleen
No real bugs I believe, just some dead code. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: andi@firstfloor.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-21Input: sysrq - drop tty argument form handle_sysrq()Dmitry Torokhov
Sysrq operations do not accept tty argument anymore so no need to pass it to us. [Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code caused by sysrq using bool but not including linux/types.h] [Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr driver] Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-16kdb: fix compile error without CONFIG_KALLSYMSJason Wessel
If CONFIG_KGDB_KDB is set and CONFIG_KALLSYMS is not set the kernel will fail to build with the error: kernel/built-in.o: In function `kallsyms_symbol_next': kernel/debug/kdb/kdb_support.c:237: undefined reference to `kdb_walk_kallsyms' kernel/built-in.o: In function `kallsyms_symbol_complete': kernel/debug/kdb/kdb_support.c:193: undefined reference to `kdb_walk_kallsyms' The kdb_walk_kallsyms needs a #ifdef proper header to match the C implementation. This patch also fixes the compiler warnings in kdb_support.c when compiling without CONFIG_KALLSYMS set. The compiler warnings are a result of the kallsyms_lookup() macro not initializing the two of the pass by reference variables. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reported-by: Michal Simek <monstr@monstr.eu>
2010-08-06Merge branch 'timers-timekeeping-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Fix read_persistent_clock fallout kgdb: Do not access xtime directly powerpc: Clean up obsolete code relating to decrementer and timebase powerpc: Rework VDSO gettimeofday to prevent time going backwards clocksource: Add __clocksource_updatefreq_hz/khz methods x86: Convert common clocksources to use clocksource_register_hz/khz timekeeping: Make xtime and wall_to_monotonic static hrtimer: Cleanup direct access to wall_to_monotonic um: Convert to use read_persistent_clock timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset powerpc: Cleanup xtime usage powerpc: Simplify update_vsyscall time: Kill off CONFIG_GENERIC_TIME time: Implement timespec_add x86: Fix vtime/file timestamp inconsistencies Trivial conflicts in Documentation/feature-removal-schedule.txt Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as per Thomas' earlier merge commit 47916be4e28c ("Merge branch 'powerpc.cherry-picks' into timers/clocksource")
2010-08-05vt,console,kdb: automatically set kdb LINES variableJason Wessel
The kernel console interface stores the number of lines it is configured to use. The kdb debugger can greatly benefit by knowing how many lines there are on the console for the pager functionality without having the end user compile in the setting or have to repeatedly change it at run time. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> CC: David Airlie <airlied@linux.ie> CC: Andrew Morton <akpm@linux-foundation.org>
2010-08-05kgdb,kdb: individual register set and and get APIJason Wessel
The kdb shell specification includes the ability to get and set architecture specific registers by name. For the time being individual register get and set will be implemented on a per architecture basis. If an architecture defines DBG_MAX_REG_NUM > 0 then kdb and the gdbstub will use the capability for individually getting and setting architecture specific registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-07-29kgdb: Do not access xtime directlyThomas Gleixner
The xtime cleanup missed the kgdb access to xtime. Fix it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-21sysrq,kdb: Use __handle_sysrq() for kdb's sysrq functionJason Wessel
The kdb code should not toggle the sysrq state in case an end user wants to try and resume the normal kernel execution. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-07-21Fix merge regression from external kdb to upstream kdbJason Wessel
In the process of merging kdb to the mainline, the kdb lsmod command stopped printing the base load address of kernel modules. This is needed for using kdb in conjunction with external tools such as gdb. Simply restore the functionality by adding a kdb_printf for the base load address of the kernel modules. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 12:30:34 +0000