summaryrefslogtreecommitdiff
path: root/ipc
AgeCommit message (Collapse)Author
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06ipc/mqueue.c: have RT tasks queue in by priority in wq_add()Jonathan Haws
Previous behavior added tasks to the work queue using the static_prio value instead of the dynamic priority value in prio. This caused RT tasks to be added to the work queue in a FIFO manner rather than by priority. Normal tasks were handled by priority. This fix utilizes the dynamic priority of the task to ensure that both RT and normal tasks are added to the work queue in priority order. Utilizing the dynamic priority (prio) rather than the base priority (normal_prio) was chosen to ensure that if a task had a boosted priority when it was added to the work queue, it would be woken sooner to to ensure that it releases any other locks it may be holding in a more timely manner. It is understood that the task could have a lower priority when it wakes than when it was added to the queue in this (unlikely) case. Link: http://lkml.kernel.org/r/1513006652-7014-1-git-send-email-jhaws@sdl.usu.edu Signed-off-by: Jonathan Haws <jhaws@sdl.usu.edu> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06ipc: fix ipc data structures inconsistencyPhilippe Mikoyan
As described in the title, this patch fixes <ipc>id_ds inconsistency when <ipc>ctl_stat executes concurrently with some ds-changing function, e.g. shmat, msgsnd or whatever. For instance, if shmctl(IPC_STAT) is running concurrently with shmat, following data structure can be returned: {... shm_lpid = 0, shm_nattch = 1, ...} Link: http://lkml.kernel.org/r/20171202153456.6514-1-philippe.mikoyan@skat.systems Signed-off-by: Philippe Mikoyan <philippe.mikoyan@skat.systems> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-30Merge branch 'work.mqueue' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull mqueue/bpf vfs cleanups from Al Viro: "mqueue and bpf go through rather painful and similar contortions to create objects in their dentry trees. Provide a primitive for doing that without abusing ->mknod(), switch bpf and mqueue to it. Another mqueue-related thing that has ended up in that branch is on-demand creation of internal mount (based upon the work of Giuseppe Scrivano)" * 'work.mqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mqueue: switch to on-demand creation of internal mount tidy do_mq_open() up a bit mqueue: clean prepare_open() up do_mq_open(): move all work prior to dentry_open() into a helper mqueue: fold mq_attr_ok() into mqueue_get_inode() move dentry_open() calls up into do_mq_open() mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdata bpf_obj_do_pin(): switch to vfs_mkobj(), quit abusing ->mknod() new primitive: vfs_mkobj()
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-12signal: Ensure generic siginfos the kernel sends have all bits initializedEric W. Biederman
Call clear_siginfo to ensure stack allocated siginfos are fully initialized before being passed to the signal sending functions. This ensures that if there is the kind of confusion documented by TRAP_FIXME, FPE_FIXME, or BUS_FIXME the kernel won't send unitialized data to userspace when the kernel generates a signal with SI_USER but the copy to userspace assumes it is a different kind of signal, and different fields are initialized. This also prepares the way for turning copy_siginfo_to_user into a copy_to_user, by removing the need in many cases to perform a field by field copy simply to skip the uninitialized fields. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-05mqueue: switch to on-demand creation of internal mountAl Viro
Instead of doing that upon each ipcns creation, we do that the first time mq_open(2) or mqueue mount is done in an ipcns. What's more, doing that allows to get rid of mount_ns() use - we can go with considerably cheaper mount_nodev(), avoiding the loop over all mqueue superblock instances; ipcns->mq_mnt is used to locate preexisting instance in O(1) time instead of O(instances) mount_ns() would've cost us. Based upon the version by Giuseppe Scrivano <gscrivan@redhat.com>; I've added handling of userland mqueue mounts (original had been broken in that area) and added a switch to mount_nodev(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05tidy do_mq_open() up a bitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05mqueue: clean prepare_open() upAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05do_mq_open(): move all work prior to dentry_open() into a helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05mqueue: fold mq_attr_ok() into mqueue_get_inode()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05move dentry_open() calls up into do_mq_open()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-05mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdataAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27ipc, kernel, mm: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-27Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...
2017-11-17sysvipc: make get_maxid O(1) againDavidlohr Bueso
For a custom microbenchmark on a 3.30GHz Xeon SandyBridge, which calls IPC_STAT over and over, it was calculated that, on avg the cost of ipc_get_maxid() for increasing amounts of keys was: 10 keys: ~900 cycles 100 keys: ~15000 cycles 1000 keys: ~150000 cycles 10000 keys: ~2100000 cycles This is unsurprising as maxid is currently O(n). By having the max_id available in O(1) we save all those cycles for each semctl(_STAT) command, the idr_find can be expensive -- which some real (customer) workloads actually poll on. Note that this used to be the case, until commit 7ca7e564e04 ("ipc: store ipcs into IDRs"). The cost is the extra idr_find when doing RMIDs, but we simply go backwards, and should not take too many iterations to find the new value. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170831172049.14576-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17sysvipc: properly name ipc_addid() limit parameterDavidlohr Bueso
This is better understood as a limit, instead of size; exactly like the function comment indicates. Rename it. Link: http://lkml.kernel.org/r/20170831172049.14576-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17sysvipc: duplicate lock comments wrt ipc_addid()Davidlohr Bueso
The comment in msgqueues when using ipc_addid() is quite useful imo. Duplicate it for shm and semaphores. Link: http://lkml.kernel.org/r/20170831172049.14576-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17sysvipc: unteach ids->next_id for !CHECKPOINT_RESTOREDavidlohr Bueso
Patch series "sysvipc: ipc-key management improvements". Here are a few improvements I spotted while eyeballing Guillaume's rhashtable implementation for ipc keys. The first and fourth patches are the interesting ones, the middle two are trivial. This patch (of 4): The next_id object-allocation functionality was introduced in commit 03f595668017 ("ipc: add sysctl to specify desired next object id"). Given that these new entries are _only_ exported under the CONFIG_CHECKPOINT_RESTORE option, there is no point for the common case to even know about ->next_id. As such rewrite ipc_buildid() such that it can do away with the field as well as unnecessary branches when adding a new identifier. The end result also better differentiates both cases, so the code ends up being cleaner; albeit the small duplications regarding the default case. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170831172049.14576-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, really no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: grab the lock instead of blocking in __fd_install during resizing vfs: stop clearing close on exec when closing a fd include/linux/fs.h: fix comment about struct address_space fs: make fiemap work from compat_ioctl coda: fix 'kernel memory exposure attempt' in fsync pstore: remove unneeded unlikely() vfs: remove unneeded unlikely() stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case make vfs_ustat() static do_handle_open() should be static elf_fdpic: fix unused variable warning fold destroy_super() into __put_super() new helper: destroy_unused_super() fix address space warnings in ipc/ acct.h: get rid of detritus
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-11fix address space warnings in ipc/Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-25fix a typo in put_compat_shm_info()Al Viro
"uip" misspelled as "up"; unfortunately, the latter happens to be a function and gcc is happy to convert it to void *... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-20ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_userWill Deacon
Commit 553f770ef71b ("ipc: move compat shmctl to native") moved the compat IPC syscall handling into ipc/shm.c and refactored the struct accessors in the process. Unfortunately, the call to copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command gets the arguments the wrong way round, passing a kernel stack address as the user buffer (destination) and the user buffer as the kernel stack address (source). This patch fixes the parameter ordering so the buffers are accessed correctly. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-14Merge branch 'work.ipc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc compat cleanup and 64-bit time_t from Al Viro: "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa Dinamani" * 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: utimes: Make utimes y2038 safe ipc: shm: Make shmid_kernel timestamps y2038 safe ipc: sem: Make sem_array timestamps y2038 safe ipc: msg: Make msg_queue timestamps y2038 safe ipc: mqueue: Replace timespec with timespec64 ipc: Make sys_semtimedop() y2038 safe get rid of SYSVIPC_COMPAT on ia64 semtimedop(): move compat to native shmat(2): move compat to native msgrcv(2), msgsnd(2): move compat to native ipc(2): move compat to native ipc: make use of compat ipc_perm helpers semctl(): move compat to native semctl(): separate all layout-dependent copyin/copyout msgctl(): move compat to native msgctl(): split the actual work from copyin/copyout ipc: move compat shmctl to native shmctl: split the work from copyin/copyout
2017-09-08ipc: optimize semget/shmget/msgget for lots of keysGuillaume Knispel
ipc_findkey() used to scan all objects to look for the wanted key. This is slow when using a high number of keys. This change adds an rhashtable of kern_ipc_perm objects in ipc_ids, so that one lookup cease to be O(n). This change gives a 865% improvement of benchmark reaim.jobs_per_min on a 56 threads Intel(R) Xeon(R) CPU E5-2695 v3 @ 2.30GHz with 256G memory [1] Other (more micro) benchmark results, by the author: On an i5 laptop, the following loop executed right after a reboot took, without and with this change: for (int i = 0, k=0x424242; i < KEYS; ++i) semget(k++, 1, IPC_CREAT | 0600); total total max single max single KEYS without with call without call with 1 3.5 4.9 µs 3.5 4.9 10 7.6 8.6 µs 3.7 4.7 32 16.2 15.9 µs 4.3 5.3 100 72.9 41.8 µs 3.7 4.7 1000 5,630.0 502.0 µs * * 10000 1,340,000.0 7,240.0 µs * * 31900 17,600,000.0 22,200.0 µs * * *: unreliable measure: high variance The duration for a lookup-only usage was obtained by the same loop once the keys are present: total total max single max single KEYS without with call without call with 1 2.1 2.5 µs 2.1 2.5 10 4.5 4.8 µs 2.2 2.3 32 13.0 10.8 µs 2.3 2.8 100 82.9 25.1 µs * 2.3 1000 5,780.0 217.0 µs * * 10000 1,470,000.0 2,520.0 µs * * 31900 17,400,000.0 7,810.0 µs * * Finally, executing each semget() in a new process gave, when still summing only the durations of these syscalls: creation: total total KEYS without with 1 3.7 5.0 µs 10 32.9 36.7 µs 32 125.0 109.0 µs 100 523.0 353.0 µs 1000 20,300.0 3,280.0 µs 10000 2,470,000.0 46,700.0 µs 31900 27,800,000.0 219,000.0 µs lookup-only: total total KEYS without with 1 2.5 2.7 µs 10 25.4 24.4 µs 32 106.0 72.6 µs 100 591.0 352.0 µs 1000 22,400.0 2,250.0 µs 10000 2,510,000.0 25,700.0 µs 31900 28,200,000.0 115,000.0 µs [1] http://lkml.kernel.org/r/20170814060507.GE23258@yexl-desktop Link: http://lkml.kernel.org/r/20170815194954.ck32ta2z35yuzpwp@debix Signed-off-by: Guillaume Knispel <guillaume.knispel@supersonicimagine.com> Reviewed-by: Marc Pardo <marc.pardo@supersonicimagine.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Kees Cook <keescook@chromium.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Serge Hallyn <serge@hallyn.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Guillaume Knispel <guillaume.knispel@supersonicimagine.com> Cc: Marc Pardo <marc.pardo@supersonicimagine.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08ipc/sem: play nicer with large nsops allocationsDavidlohr Bueso
Replacing semop()'s kmalloc for kvmalloc was originally proposed by Manfred on the premise that it can be called for large (than order-1) sizes. For example, while Oracle recommends setting SEMOPM to a _minimum_ of 100, some distros[1] encourage the setting to be a factor of the amount of db tasks (PROCESSES), which can get fishy for large systems (easily going beyond 1000). [1] An Example of Semaphore Settings https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/html/Tuning_and_Optimizing_Red_Hat_Enterprise_Linux_for_Oracle_9i_and_10g_Databases/sect-Oracle_9i_and_10g_Tuning_Guide-Setting_Semaphores-An_Example_of_Semaphore_Settings.html So let's just convert this to kvmalloc, just like the rest of the allocations we do in ipc. While the fallback vmalloc obviously involves more overhead, this by far the uncommon path, and it's better for the user than just erroring out with kmalloc. Link: http://lkml.kernel.org/r/20170803184136.13855-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08ipc/sem: drop sem_checkid helperDavidlohr Bueso
... 'tis not used. Link: http://lkml.kernel.org/r/20170803184136.13855-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-4-git-send-email-elena.reshetova@intel.com Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08ipc: convert sem_undo_list.refcnt from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-3-git-send-email-elena.reshetova@intel.com Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-08ipc: convert ipc_namespace.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Link: http://lkml.kernel.org/r/1499417992-3238-2-git-send-email-elena.reshetova@intel.com Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: <arozansk@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-03ipc: shm: Make shmid_kernel timestamps y2038 safeDeepa Dinamani
time_t is not y2038 safe. Replace all uses of time_t by y2038 safe time64_t. Similarly, replace the calls to get_seconds() with y2038 safe ktime_get_real_seconds(). Note that this preserves fast access on 64 bit systems, but 32 bit systems need sequence counters. The syscall interfaces themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03ipc: sem: Make sem_array timestamps y2038 safeDeepa Dinamani
time_t is not y2038 safe. Replace all uses of time_t by y2038 safe time64_t. Similarly, replace the calls to get_seconds() with y2038 safe ktime_get_real_seconds(). Note that this preserves fast access on 64 bit systems, but 32 bit systems need sequence counters. The syscall interface themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03ipc: msg: Make msg_queue timestamps y2038 safeDeepa Dinamani
time_t is not y2038 safe. Replace all uses of time_t by y2038 safe time64_t. Similarly, replace the calls to get_seconds() with y2038 safe ktime_get_real_seconds(). Note that this preserves fast access on 64 bit systems, but 32 bit systems need sequence counters. The syscall interfaces themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03ipc: mqueue: Replace timespec with timespec64Deepa Dinamani
struct timespec is not y2038 safe. Replace all uses of timespec by y2038 safe struct timespec64. Even though timespec is used here to represent timeouts, replace these with timespec64 so that it facilitates in verification by creating a y2038 safe kernel image that is free of timespec. The syscall interfaces themselves are not changed as part of the patch. They will be part of a different series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-03ipc: Make sys_semtimedop() y2038 safeDeepa Dinamani
struct timespec is not y2038 safe on 32 bit machines. Replace timespec with y2038 safe struct timespec64. Note that the patch only changes the internals without modifying the syscall interface. This will be part of a separate series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-21Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Removal of spin_unlock_wait() - SRCU updates - Torture-test updates - Documentation updates - Miscellaneous fixes - CPU-hotplug fixes - Miscellaneous non-RCU fixes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-17ipc: Replace spin_unlock_wait() with lock/unlock pairPaul E. McKenney
There is no agreed-upon definition of spin_unlock_wait()'s semantics, and it appears that all callers could do just as well with a lock/unlock pair. This commit therefore replaces the spin_unlock_wait() call in exit_sem() with spin_lock() followed immediately by spin_unlock(). This should be safe from a performance perspective because exit_sem() is rarely invoked in production. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Manfred Spraul <manfred@colorfullife.com>
2017-08-02ipc: add missing container_of()s for randstructKees Cook
When building with the randstruct gcc plugin, the layout of the IPC structs will be randomized, which requires any sub-structure accesses to use container_of(). The proc display handlers were missing the needed container_of()s since the iterator is passing in the top-level struct kern_ipc_perm. This would lead to crashes when running the "lsipc" program after the system had IPC registered (e.g. after starting up Gnome): general protection fault: 0000 [#1] PREEMPT SMP ... RIP: 0010:shm_add_rss_swap.isra.1+0x13/0xa0 ... Call Trace: sysvipc_shm_proc_show+0x5e/0x150 sysvipc_proc_show+0x1a/0x30 seq_read+0x2e9/0x3f0 ... Link: http://lkml.kernel.org/r/20170730205950.GA55841@beast Fixes: 3859a271a003 ("randstruct: Mark various structs for randomization") Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-15semtimedop(): move compat to nativeAl Viro
... and finally kill the sodding compat_convert_timespec() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15shmat(2): move compat to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15msgrcv(2), msgsnd(2): move compat to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15ipc(2): move compat to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15ipc: make use of compat ipc_perm helpersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15semctl(): move compat to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15semctl(): separate all layout-dependent copyin/copyoutAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15msgctl(): move compat to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15msgctl(): split the actual work from copyin/copyoutAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-15ipc: move compat shmctl to nativeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>