summaryrefslogtreecommitdiff
path: root/init/initramfs.c
AgeCommit message (Collapse)Author
2019-01-04initramfs: cleanup incomplete rootfsDavid Engraf
Unpacking an external initrd may fail e.g. not enough memory. This leads to an incomplete rootfs because some files might be extracted already. Fixed by cleaning the rootfs so the kernel is not using an incomplete rootfs. Link: http://lkml.kernel.org/r/20181030151805.5519-1-david.engraf@sysgo.com Signed-off-by: David Engraf <david.engraf@sysgo.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-04Merge tag 'v4.20-rc5' into for-4.21/blockJens Axboe
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and also getting the merge fix that went into mainline that users are hitting testing for-4.21/block and/or for-next. * tag 'v4.20-rc5': (664 commits) Linux 4.20-rc5 PCI: Fix incorrect value returned from pcie_get_speed_cap() MAINTAINERS: Update linux-mips mailing list address ocfs2: fix potential use after free mm/khugepaged: fix the xas_create_range() error path mm/khugepaged: collapse_shmem() do not crash on Compound mm/khugepaged: collapse_shmem() without freezing new_page mm/khugepaged: minor reorderings in collapse_shmem() mm/khugepaged: collapse_shmem() remember to clear holes mm/khugepaged: fix crashes due to misaccounted holes mm/khugepaged: collapse_shmem() stop if punched or truncated mm/huge_memory: fix lockdep complaint on 32-bit i_size_read() mm/huge_memory: splitting set mapping+index before unfreeze mm/huge_memory: rename freeze_page() to unmap_page() initramfs: clean old path before creating a hardlink kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace psi: make disabling/enabling easier for vendor kernels proc: fixup map_files test on arm debugobjects: avoid recursive calls with kmemleak userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set ...
2018-11-30initramfs: clean old path before creating a hardlinkLi Zhijian
sys_link() can fail due to the new path already existing. This case ofen occurs when we use a concated initrd, for example: 1) prepare a basic rootfs, it contains a regular files rc.local lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local #!/bin/sh echo "Running /etc/rc.local..." yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz 2) create a extra initrd which also includes a etc/rc.local lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink File: 'rc.local' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - File: 'rc.local.hardlink' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t . etc etc/rc.local.hardlink <<< it will be extracted first at this initrd etc/rc.local 3) concate 2 initrds and boot lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults In this case, sys_link(2) will fail and return -EEXIST, so we can only get the rc.local at rootfs.cgz instead of rc-local.cgz [akpm@linux-foundation.org: move code to avoid forward declaration] Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.com Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Philip Li <philip.li@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Li Zhijian <zhijianx.li@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-07block: remove dead elevator codeJens Axboe
This removes a bunch of core and elevator related code. On the core front, we remove anything related to queue running, draining, initialization, plugging, and congestions. We also kill anything related to request allocation, merging, retrieval, and completion. Remove any checking for single queue IO schedulers, as they no longer exist. This means we can also delete a bunch of code related to request issue, adding, completion, etc - and all the SQ related ops and helpers. Also kill the load_default_modules(), as all that did was provide for a way to load the default single queue elevator. Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-22init/: remove ineffective sparse disablingLuc Van Oostenryck
Sparse checking used to be disabled on init/do_mounts.c and a few related files because "Many of the syscalls used in this file expect some of the arguments to be __user pointers not __kernel pointers". However since 28128c61e ("kconfig.h: Include compiler types to avoid missed struct attributes") the checks are, in fact, not disabled anymore because of the more early include of "linux/compiler_types.h" So remove the now ineffective #undefery that was done to disable these warnings, as well as the associated comment. Link: http://lkml.kernel.org/r/20180617115355.53799-1-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-02fs: add ksys_getdents64() helper; remove in-kernel calls to sys_getdents64()Dominik Brodowski
Using this helper allows us to avoid the in-kernel calls to the sys_getdents64() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_getdents64(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_open() wrapper; remove in-kernel calls to sys_open()Dominik Brodowski
Using this wrapper allows us to avoid the in-kernel calls to the sys_open() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_open(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_close() wrapper; remove in-kernel calls to sys_close()Dominik Brodowski
Using the ksys_close() wrapper allows us to get rid of in-kernel calls to the sys_close() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_close(), with one subtle difference: The few places which checked the return value did not care about the return value re-writing in sys_close(), so simply use a wrapper around __close_fd(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_ftruncate() wrapper; remove in-kernel calls to sys_ftruncate()Dominik Brodowski
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_ftruncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_fchownat(), ksys_fchown() helpers and ksys_{,l}chown() wrappersDominik Brodowski
Using the fs-interal do_fchownat() wrapper allows us to get rid of fs-internal calls to the sys_fchownat() syscall. Introducing the ksys_fchown() helper and the ksys_{,}chown() wrappers allows us to avoid the in-kernel calls to the sys_{,l,f}chown() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_{,l,f}chown(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_fchmod() and do_fchmodat() helpers and ksys_chmod() wrapper; ↵Dominik Brodowski
remove in-kernel calls to syscall Using the fs-internal do_fchmodat() helper allows us to get rid of fs-internal calls to the sys_fchmodat() syscall. Introducing the ksys_fchmod() helper and the ksys_chmod() wrapper allows us to avoid the in-kernel calls to the sys_fchmod() and sys_chmod() syscalls. The ksys_ prefix denotes that these functions are meant as a drop-in replacement for the syscalls. In particular, they use the same calling convention as sys_fchmod() and sys_chmod(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_linkat() helper and ksys_link() wrapper; remove in-kernel calls ↵Dominik Brodowski
to syscall Using the fs-internal do_linkat() helper allows us to get rid of fs-internal calls to the sys_linkat() syscall. Introducing the ksys_link() wrapper allows us to avoid the in-kernel calls to sys_link() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_link(). In the near future, the only fs-external user of ksys_link() should be converted to use vfs_link() instead. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_mknodat() helper and ksys_mknod() wrapper; remove in-kernel calls ↵Dominik Brodowski
to syscall Using the fs-internal do_mknodat() helper allows us to get rid of fs-internal calls to the sys_mknodat() syscall. Introducing the ksys_mknod() wrapper allows us to avoid the in-kernel calls to sys_mknod() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mknod(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_symlinkat() helper and ksys_symlink() wrapper; remove in-kernel ↵Dominik Brodowski
calls to syscall Using the fs-internal do_symlinkat() helper allows us to get rid of fs-internal calls to the sys_symlinkat() syscall. Introducing the ksys_symlink() wrapper allows us to avoid the in-kernel calls to the sys_symlink() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_symlink(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add do_mkdirat() helper and ksys_mkdir() wrapper; remove in-kernel calls ↵Dominik Brodowski
to syscall Using the fs-internal do_mkdirat() helper allows us to get rid of fs-internal calls to the sys_mkdirat() syscall. Introducing the ksys_mkdir() wrapper allows us to avoid the in-kernel calls to the sys_mkdir() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mkdir(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_rmdir() wrapper; remove in-kernel calls to sys_rmdir()Dominik Brodowski
Using this wrapper allows us to avoid the in-kernel calls to the sys_rmdir() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_rmdir(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_unlink() wrapper; remove in-kernel calls to sys_unlink()Dominik Brodowski
Using this wrapper allows us to avoid the in-kernel calls to the sys_unlink() syscall. The ksys_ prefix denotes that this function is meant s a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_unlink(). In the near future, all callers of ksys_unlink() should be converted to call do_unlinkat() directly or, at least, to operate on regular kernel pointers. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_write() helper; remove in-kernel calls to sys_write()Dominik Brodowski
Using this helper allows us to avoid the in-kernel calls to the sys_write() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_write(). In the near future, the do_mounts / initramfs callers of ksys_write() should be converted to use filp_open() and vfs_write() instead. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-s390@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-11-17initramfs: use time64_t timestampsArnd Bergmann
The cpio format uses a 32-bit number to encode file timestamps, which breaks initramfs support in 2038. This reinterprets the timestamp as unsigned, to give us another 68 years and avoids breaking until 2106. Link: http://lkml.kernel.org/r/20171019095536.801199-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-03utimes: Make utimes y2038 safeDeepa Dinamani
struct timespec is not y2038 safe on 32 bit machines. Replace timespec with y2038 safe struct timespec64. Note that the patch only changes the internals without modifying the syscall interfaces. This will be part of a separate series. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-08initramfs: use vfs_stat/lstat directlyArnd Bergmann
sys_newlstat is a system call implementation that is meant for user space, and that copies kernel-internal data structure to the user format, which is not needed for in-kernel users. Further, as we rearrange the system call implementation so we can extend it with 64-bit time_t, the prototype for sys_newlstat changes. This changes the initramfs code to use vfs_lstat directly, to get it out of the way of the time_t changes, and make it slightly more efficient in the process. Along the same lines we also replace sys_stat and sys_stat64 with vfs_stat. Link: http://lkml.kernel.org/r/20170314214932.4052842-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08initramfs: provide a way to ignore image provided by bootloaderDaniel Thompson
Many "embedded" architectures provide CMDLINE_FORCE to allow the kernel to override the command line provided by an inflexible bootloader. However there is currrently no way for the kernel to override the initramfs image provided by the bootloader meaning there are still ways for bootloaders to make things difficult for us. Fix this by introducing INITRAMFS_FORCE which can prevent the kernel from loading the bootloader supplied image. We use CMDLINE_FORCE (and its friend CMDLINE_EXTEND) to imply that the system has an inflexible bootloader. This allow us to avoid presenting this config option to users of systems where inflexible bootloaders aren't usually a problem. Link: http://lkml.kernel.org/r/20170217121940.30126-1-daniel.thompson@linaro.org Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-06initramfs: avoid "label at end of compound statement" errorLinus Torvalds
Commit 17a9be317475 ("initramfs: Always do fput() and load modules after rootfs populate") introduced an error for the CONFIG_BLK_DEV_RAM=y case, because even though the code looks fine, the compiler really wants a statement after a label, or you'll get complaints: init/initramfs.c: In function 'populate_rootfs': init/initramfs.c:644:2: error: label at end of compound statement That commit moved the subsequent statements to outside the compound statement, leaving the label without any associated statements. Reported-by: Jörg Otte <jrg.otte@gmail.com> Fixes: 17a9be317475 ("initramfs: Always do fput() and load modules after rootfs populate") Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: stable@vger.kernel.org # if 17a9be317475 gets backported Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-05initramfs: Always do fput() and load modules after rootfs populateStafford Horne
In OpenRISC we do not have a bootloader passed initrd, but the built in initramfs does contain the /init and other binaries, including modules. The previous commit 08865514805d2 ("initramfs: finish fput() before accessing any binary from initramfs") made a change to only call fput() if the bootloader initrd was available, this caused intermittent crashes for OpenRISC. This patch changes the fput() to happen unconditionally if any rootfs is loaded. Also, I added some comments to make it a bit more clear why we call unpack_to_rootfs() multiple times. Fixes: 08865514805d2 ("initramfs: finish fput() before accessing any binary from initramfs") Cc: stable@vger.kernel.org Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-27initramfs: finish fput() before accessing any binary from initramfsLokesh Vutla
Commit 4a9d4b024a31 ("switch fput to task_work_add") implements a schedule_work() for completing fput(), but did not guarantee calling __fput() after unpacking initramfs. Because of this, there is a possibility that during boot a driver can see ETXTBSY when it tries to load a binary from initramfs as fput() is still pending on that binary. This patch makes sure that fput() is completed after unpacking initramfs and removes the call to flush_delayed_fput() in kernel_init() which happens very late after unpacking initramfs. Link: http://lkml.kernel.org/r/20170201140540.22051-1-lokeshvutla@ti.com Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reported-by: Murali Karicheri <m-karicheri2@ti.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10kexec: split kexec_load syscall from kexec core codeDave Young
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14init/initramfs.c: resolve shadow warningsMark Rustad
Resolve shadow warnings that are produced in W=2 builds by renaming a global with a too-generic name and renaming a formal parameter. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08initramfs: add write error checksDavid Engraf
On a system with low memory extracting the initramfs may fail. If this happens the user gets "Failed to execute /init" instead of an initramfs error. Check return value of sys_write and call error() when the write was incomplete or failed. Signed-off-by: David Engraf <david.engraf@sysgo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08initramfs: support initramfs that is bigger than 2GiBYinghai Lu
Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08initramfs: support initrd that is bigger than 2GiBYinghai Lu
When initrd (compressed or not) is used, kernel report data corrupted with /dev/ram0. The root cause: During initramfs checking, if it is initrd, it will be transferred to /initrd.image with sys_write. sys_write only support 2G-4K write, so if the initrd ram is more than that, /initrd.image will not complete at all. Add local xwrite to loop calling sys_write to workaround the problem. Also need to use xwrite in write_buffer() to handle: image is uncompressed cpio and there is one big file (>2G) in it. unpack_to_rootfs ===> write_buffer ===> actions[]/do_copy At the same time, we don't need to worry about sys_read/sys_write in do_mounts_rd.c::crd_load. As decompressor will have fill/flush and local buffer that is smaller than 2G. Test with uncompressed initrd, and compressed ones with gz, bz2, lzma,xz, lzop. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07initramfs: debug detected compression methodDaniel M. Weeks
This can greatly aid in narrowing down the real source of initramfs problems such as failures related to the compression of the in-kernel initramfs when an external initramfs is in use as well. Existing errors are ambiguous as to which initramfs is a problem and why. [akpm@linux-foundation.org: use pr_debug()] Signed-off-by: Daniel M. Weeks <dan@danweeks.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23init: fix possible format string bugTetsuo Handa
Use constant format string in case message changes. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-18init, block: try to load default elevator module early during bootTejun Heo
This patch adds default module loading and uses it to load the default block elevator. During boot, it's called right after initramfs or initrd is made available and right before control is passed to userland. This ensures that as long as the modules are available in the usual places in initramfs, initrd or the root filesystem, the default modules are loaded as soon as possible. This will replace the on-demand elevator module loading from elevator init path. v2: Fixed build breakage when !CONFIG_BLOCK. Reported by kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Fengguang We <fengguang.wu@intel.com>
2012-05-31init: disable sparse checking of the mount.o source filesH Hartley Sweeten
The init/mount.o source files produce a number of sparse warnings of the type: warning: incorrect type in argument 1 (different address spaces) expected char [noderef] <asn:1>*dev_name got char *name This is due to the syscalls expecting some of the arguments to be user pointers but they are being passed as kernel pointers. This is harmless but adds a lot of noise to a sparse build. To limit the noise just disable the sparse checking in the relevant source files, but still display a warning so that the user knows this has been done. Since the sparse checking has been disabled we can also remove the __user __force casts that are scattered thru the source. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03init/initramfs.c: should use umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: initramfs: Fix build break on symbol-prefixed archs initramfs: fix initramfs size calculation initramfs: generalize initramfs_data.xxx.S variants scripts/kallsyms: Enable error messages while hush up unnecessary warnings scripts/setlocalversion: update comment kbuild: Use a single clean rule for kernel and external modules kbuild: Do not run make clean in $(srctree) scripts/mod/modpost.c: fix commentary accordingly to last changes kbuild: Really don't clean bounds.h and asm-offsets.h
2010-10-26init: mark __user address space on string literalsNamhyung Kim
When calling syscall service routines in kernel, some of arguments should be user pointers but were missing __user markup on string literals. Add it. Removes some sparse warnings. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-29initramfs: fix initramfs size calculationHendrik Brueckner
The size of a built-in initramfs is calculated in init/initramfs.c by "__initramfs_end - __initramfs_start". Those symbols are defined in the linker script include/asm-generic/vmlinux.lds.h: #define INIT_RAM_FS \ . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__initramfs_start) = .; \ *(.init.ramfs) \ VMLINUX_SYMBOL(__initramfs_end) = .; If the initramfs file has an odd number of bytes, the "__initramfs_end" symbol points to an odd address, for example, the symbols in the System.map might look like: 0000000000572000 T __initramfs_start 00000000005bcd05 T __initramfs_end <-- odd address At least on s390 this causes a problem: Certain s390 instructions, especially instructions for loading addresses (larl) or branch addresses must be on even addresses. The compiler loads the symbol addresses with the "larl" instruction. This instruction sets the last bit to 0 and, therefore, for odd size files, the calculated size is one byte less than it should be: 0000000000540a9c <populate_rootfs>: 540a9c: eb cf f0 78 00 24 stmg %r12,%r15,120(%r15), 540aa2: c0 10 00 01 8a af larl %r1,572000 <__initramfs_start> 540aa8: c0 c0 00 03 e1 2e larl %r12,5bcd04 <initramfs_end> (Instead of 5bcd05) ... 540abe: 1b c1 sr %r12,%r1 To fix the problem, this patch introduces the global variable __initramfs_size, which is calculated in the "usr/initramfs_data.S" file. The populate_rootfs() function can then use the start marker of the .init.ramfs section and the value of __initramfs_size for loading the initramfs. Because the start marker and size is sufficient, the __initramfs_end symbol is no longer needed and is removed. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-04-24initramfs: handle unrecognised decompressor when unpackingPhillip Lougher
The unpack routine fails to handle the decompress_method() returning unrecognised decompressor (compress_name == NULL). This results in the routine looping eventually oopsing on an out of bounds memory access. Note this bug is usually hidden, only triggering on trailing junk after one or more correct compressed blocks. The case of the compressed archive being complete junk is (by accident?) caught by the if (state != Reset) check because state is initialised to Start, but not updated due to the decompressor not having been called. Obviously if the junk is trailing a correctly decompressed buffer, state == Reset from the previous call to the decompressor. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06init/initramfs.c: fix "symbol shadows an earlier one" noiseH Hartley Sweeten
The symbol 'count' is a local global variable in this file. The function clean_rootfs() should use a different symbol name to prevent "symbol shadows an earlier one" noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15initramfs: add missing decompressor error checkPhillip Lougher
The decompressors return error by calling a supplied error function, and/or by returning an error return value. The initramfs code, however, fails to check the exit code returned by the decompressor, and only checks the error status set by calling the error function. This patch adds a return code check and calls the error function. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> LKML-Reference: <4b26b1ef.0+ZWxT6886olqcSc%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-06initramfs: clean up messages related to initramfs unpackingEric Piel
With the removal of duplicate unpack_to_rootfs() (commit df52092f3c97788592ef72501a43fb7ac6a3cfe0) the messages displayed do not actually correspond to what the kernel is doing. In addition, depending if ramdisks are supported or not, the messages are not at all the same. So keep the messages more in sync with what is really doing the kernel, and only display a second message in case of failure. This also ensure that the printk message cannot be split by other printk's. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13initramfs: fix initramfs to work with hardlinked initRandy Robertson
Change cb6ff208076b5f434db1b8c983429269d719cef5 ("NOMMU: Support XIP on initramfs") seems to have broken booting from initramfs with /sbin/init being a hardlink. It seems like the logic required for XIP on nommu, i.e. ftruncate to reported cpio header file size (body_len) is broken for hardlinks, which have a reported size of 0, and the truncate thus nukes the contents of the file (in my case busybox), making boot impossible and ending with runaway loop modprobe binfmt-0000 - and of course 0000 is not a valid binary format. My fix is to only call ftruncate if size is non-zero which fixes things for me, but I'm not certain whether this will break XIP for those files on nommu systems, although I would guess not. Signed-off-by: Randy Robertson <rmrobert@vmware.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13init/initramfs: fix warning with CONFIG_BLK_DEV_RAM=nNikanth Karthikesan
init/initramfs.c:520: warning: 'clean_rootfs' defined but not used Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02initramfs: prevent initramfs printk message being split by messages from ↵Simon Kitching
other code. initramfs uses printk without a linefeed, then does some work, then uses printk to finish the message off. However if some other code does a printk in between, then the messages get mixed together. Better for each message to be an independent line... Example of problem that this fixes: checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Signed-off-by: Simon Kitching <skitching@apache.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30: fastboot: remove duplicate unpack_to_rootfs() ide/net: flip the order of SATA and network init async: remove the temporary (2.6.29) "async is off by default" code Fix up conflicts in init/initramfs.c manually
2009-03-28fastboot: remove duplicate unpack_to_rootfs()Li, Shaohua
we check if initrd is initramfs first and then do the real unpack. The check isn't required, we can directly do unpack. If the initrd isn't an initramfs, we can remove the garbage. In my laptop, this saves 0.1s boot time. This patch penalizes non-initramfs initrd case, but nowadays, initramfs is the most widely used method for initrds. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14init: make initrd/initramfs decompression failure a KERN_EMERG eventH. Peter Anvin
Impact: More consistent behaviour, avoid policy in the kernel Upgrade/downgrade initrd/initramfs decompression failure from inconsistently a panic or a KERN_ALERT message to a KERN_EMERG event. It is, however, possible do design a system which can recover from this (using the kernel builtin code and/or the internal initramfs), which means this is policy, not a technical necessity. A good way to handle this would be to have a panic-level=X option, to force a panic on a printk above a certain level. That is a separate patch, however. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-01-12bzip2/lzma: comprehensible error messages for missing decompressorH. Peter Anvin
Instead of failing to identify a compressed image with a decompressor that we don't have compiled in, identify it and fail with a comprehensible panic message. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>