| Age | Commit message (Collapse) | Author |
|---|
|
The inline read functions in the ADIS library don't check the return value
of the `adis_read_reg()` function and assign the value of `tmp` regardless.
Fix this by checking if return value is zero and only then assigning the
value of `tmp`.
No known case of the callers of this function incorrectly using the
value, but best to stop any potential risk here.
Not suitable for stable due to no known actual bugs caused by this
issue.
Fixes: 57a1228a06b7a ("iio:imu:adis: Add support for 32bit registers")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Second set of IIO + counter new device support, features etc for the 5.5 cycle.
Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
This may come via numerous trees as well as IIO.
Counter subsystem related
* ti eqep
- New device support with bindings.
- Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
- simplify count_read and count_write callbacks + document change.
- fix a typo in docs.
Various subsystems related
* AB8500
- ab8500_btemp driver converted to be an IIO consumer driver.
- ab8500_charger driver converted to be an IIO consumer driver.
- ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
- ab8500 hwmon driver converted to be an IIO consumer driver.
- mfd bindings augmented with the adc channels to make the above work.
- drop original mfd driver.
New device support
* ab8500
- new ADC driver used by the above other subystems via the IIO consumer
interface.
* adux1020 photometric sensor
- new driver and dt bindings.
* fxos877cq
- new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
- new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
- new driver for this multi-sensor type temperature interface.
Includes complex DT bindings.
* max1027
- support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
bindings.
* st_lsm6dsx
- support for the LSM6DS0 6 axis MEMs sensor.
Note different from the LSM6DSO which the driver already supports *sigh*
- support for the LSM6DSRX 6 axis MEMs sensor.
Features and cleanups
* ad7303
- replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
- add a check for devm_clk_get failing.
* at91-sama5d2
- tidy up a 0 as NULL warning.
* bmp280
- endian type tidy ups.
- use bulk regulator ops for a small reduction in code.
- use devm_add_action... to simplify error path handling.
* exynos
- drop stray semicolon.
- use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
- various tricks to improve the frequency of read out possible.
* max1027
- debugfs support.
- make interrupts optional.
- reset at probe to get clean state.
- refactors to allow addition of new device support.
* maxim thermocouple
- drop an unneeded semicolon.
* mb1232
- yaml binding conversion.
* mcp320x
- tidy up an endian types in cast warning.
* meson_saradc
- use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
- make a poison value explicity big endian to supress a warning.
* pulsedlight v2
- endian type tidy ups.
* sgp30
- drop an excess semicolon.
* sps30
- make truncation explicit with masking to clean up a warning.
* st sensors
- drop gpio include as none of these support gpios.
* st_lsm6dsx
- tidy up some alignment issues.
- refactors to allow addition of new device support.
* allow varients of irq related reg definitions.
* avoid accessing active-low, open-drain regs if not provided.
* allow varients of bdu/boot and reset regs.
* allow for enabling or disabling wakeup sources through platform
data (seems someone still uses this).
- enable wake-up events for LSM6DS0
- use the drdy mask to avoid some invalid samples during initial start
of sensor.
- Add support to trim the timestamp.
* stm32_adc
- kernel-doc fixes.
* stm32_dac
- power management support.
* stmpe-adc
- Fix endian type of local variable.
* twl4030
- use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
- use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
- reorganise buffer handling setup to be more consistent.
Fixes (mostly recent additions)
* cpcap-adc
- Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
- Sanity check the read_fifo pointer is set.
- use locked read and update functions to prevent some races.
- avoid accessing enable_reg if not provided.
- take a lock to prevent a race in updating the config.
- kernel-doc fixes.
- document wakeup-source property in dt binding.
- fix lsm9ds1 gyro gain definitions.
* tag 'iio-for-5.5b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsrx device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSRX
iio: st: Drop GPIO include
iio: adc: hx711: optimize performance in read cycle
iio: adc: stm32-adc: fix kernel-doc warnings
iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position
iio: chemical: sgp30: drop excess semicolon
iio: adc: twl4030: Use false / true instead of 0 / 1 with booleans
dt-bindings: iio: Add ltc2983 documentation
iio: temperature: Add support for LTC2983
iio: pressure: bmp280: use devm action and remove labels from probe
iio: pressure: bmp280: use bulk regulator ops
iio: imu: Add support for the FXOS8700 IMU
dt-bindings: iio: imu: add fxos8700 imu binding
staging: iio: ad9834: add a check for devm_clk_get
iio: adc: xilinx-xadc: use devm_platform_ioremap_resource
iio: temp: maxim thermocouple: Drop unneeded semi colon.
iio: adc: cpcap-adc: Fix missing IRQF_ONESHOT as only threaded handler.
iio: adc: meson_saradc: use devm_platform_ioremap_resource
iio: adc: exynos: use devm_platform_ioremap_resource
...
|
|
We want the staging fixes in here for testing and building on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single sysfs fix for 5.4-rc5.
It resolves an error if you actually try to use the __BIN_ATTR_WO()
macro, seems I never tested it properly before :(
This has been in linux-next for a while with no reported issues"
* tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Fixes __BIN_ATTR_WO() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod.
Instead, have modpost extract a symbol's namespace from __kstrtabns
and __ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused
by unescaped '/'.
Use a different sed delimiter to avoid this problem.
* tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: use alternative sed delimiter
symbol namespaces: revert to previous __ksymtab name scheme
modpost: make updating the symbol namespace explicit
modpost: delegate updating namespaces to separate function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix problems related to frequency limits management in cpufreq
that were introduced during the 5.3 cycle (when PM QoS had started to
be used for that), fix a few issues in the OPP (operating performance
points) library code and fix up the recently added haltpoll cpuidle
driver.
The cpufreq changes are somewhat bigger that I would like them to be
at this stage of the cycle, but the problems fixed by them include
crashes on boot and shutdown in some cases (among other things) and in
my view it is better to address the root of the issue right away.
Specifics:
- Using device PM QoS of CPU devices for managing frequency limits in
cpufreq does not work, so introduce frequency QoS (based on the
original low-level PM QoS) for this purpose, switch cpufreq and
related code over to using it and fix a race involving deferred
updates of frequency limits on top of that (Rafael Wysocki, Sudeep
Holla).
- Avoid calling regulator_enable()/disable() from the OPP framework
to avoid side-effects on boot-enabled regulators that may change
their initial voltage due to performing initial voltage balancing
without all restrictions from the consumers (Marek Szyprowski).
- Avoid a kref management issue in the OPP library code and drop an
incorrectly added lockdep_assert_held() from it (Viresh Kumar).
- Make the recently added haltpoll cpuidle driver take the 'idle='
override into account as appropriate (Zhenzhong Duan)"
* tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Reinitialize the list_kref before adding the static OPPs again
cpufreq: Cancel policy update work scheduled before freeing
cpuidle: haltpoll: Take 'idle=' override into account
opp: core: Revert "add regulators enable and disable"
PM: QoS: Drop frequency QoS types from device PM QoS
cpufreq: Use per-policy frequency QoS
PM: QoS: Introduce frequency QoS
opp: of: drop incorrect lockdep_assert_held()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a usual small bump in the middle, we've got a set of ASoC
fixes in this week as shown in diffstat.
The only change in the core stuff is about (somewhat minor) PCM
debugfs error handling. The major changes are rather for Intel SOF and
topology coverage, as well as other platform (rockchip, samsung, stm)
and codec fixes.
As non-ASoC changes, a couple of new HD-audio chip fixes and a typo
correction of USB-audio driver validation code are found"
* tag 'sound-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: hda: Add Tigerlake/Jasperlake PCI ID
ALSA: usb-audio: Fix copy&paste error in the validator
ALSA: hda/realtek - Add support for ALC711
ASoC: SOF: control: return true when kcontrol values change
ASoC: stm32: sai: fix sysclk management on shutdown
ASoC: Intel: sof-rt5682: add a check for devm_clk_get
ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
ASoC: simple_card_utils.h: Fix potential multiple redefinition error
ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2
ASoC: core: Fix pcm code debugfs error
ASoc: rockchip: i2s: Fix RPM imbalance
ASoC: wm_adsp: Don't generate kcontrols without READ flags
ASoC: intel: bytcr_rt5651: add null check to support_button_press
ASoC: intel: sof_rt5682: add remove function to disable jack
ASoC: rt5682: add NULL handler to set_jack function
ASoC: intel: sof_rt5682: use separate route map for dmic
ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture
ASoC: SOF: Intel: initialise and verify FW crash dump data.
ASoC: SOF: Intel: hda: fix warnings during FW load
ASoC: SOF: pcm: harden PCM STOP sequence
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes of error handling cleanup of metadata accounting with qgroups
enabled
- fix swapped values for qgroup tracepoints
- fix race when handling full sync flag
- don't start unused worker thread, functionality removed already
* tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: check for the full sync flag while holding the inode lock during fsync
Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
btrfs: tracepoints: Fix bad entry members of qgroup events
btrfs: tracepoints: Fix wrong parameter order for qgroup events
btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
btrfs: don't needlessly create extent-refs kernel thread
btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
Btrfs: add missing extents release on file extent cluster relocation error
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
|
|
There are no more active users of DEV_PM_QOS_MIN_FREQUENCY and
DEV_PM_QOS_MAX_FREQUENCY device PM QoS request types, so drop them
along with the code supporting them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Replace the CPU device PM QoS used for the management of min and max
frequency constraints in cpufreq (and its users) with per-policy
frequency QoS to avoid problems with cpufreq policies covering
more then one CPU.
Namely, a cpufreq driver is registered with the subsys interface
which calls cpufreq_add_dev() for each CPU, starting from CPU0, so
currently the PM QoS notifiers are added to the first CPU in the
policy (i.e. CPU0 in the majority of cases).
In turn, when the cpufreq driver is unregistered, the subsys interface
doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0,
and the PM QoS notifiers are only removed when cpufreq_remove_dev() is
called for the last CPU in the policy, say CPUx, which as a rule is
not CPU0 if the policy covers more than one CPU. Then, the PM QoS
notifiers cannot be removed, because CPUx does not have them, and
they are still there in the device PM QoS notifiers list of CPU0,
which prevents new PM QoS notifiers from being registered for CPU0
on the next attempt to register the cpufreq driver.
The same issue occurs when the first CPU in the policy goes offline
before unregistering the driver.
After this change it does not matter which CPU is the policy CPU at
the driver registration time and whether or not it is online all the
time, because the frequency QoS is per policy and not per CPU.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f
Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce frequency QoS, based on the "raw" low-level PM QoS, to
represent min and max frequency requests and aggregate constraints.
The min and max frequency requests are to be represented by
struct freq_qos_request objects and the aggregate constraints are to
be represented by struct freq_constraints objects. The latter are
expected to be initialized with the help of freq_constraints_init().
The freq_qos_read_value() helper is defined to retrieve the aggregate
constraints values from a given struct freq_constraints object and
there are the freq_qos_add_request(), freq_qos_update_request() and
freq_qos_remove_request() helpers to manipulate the min and max
frequency requests. It is assumed that the the helpers will not
run concurrently with each other for the same struct freq_qos_request
object, so if that may be the case, their uses must ensure proper
synchronization between them (e.g. through locking).
In addition, freq_qos_add_notifier() and freq_qos_remove_notifier()
are provided to add and remove notifiers that will trigger on aggregate
constraint changes to and from a given struct freq_constraints object,
respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Pull networking fixes from David Miller:
"I was battling a cold after some recent trips, so quite a bit piled up
meanwhile, sorry about that.
Highlights:
1) Fix fd leak in various bpf selftests, from Brian Vazquez.
2) Fix crash in xsk when device doesn't support some methods, from
Magnus Karlsson.
3) Fix various leaks and use-after-free in rxrpc, from David Howells.
4) Fix several SKB leaks due to confusion of who owns an SKB and who
should release it in the llc code. From Eric Biggers.
5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet.
6) Jumbo packets don't work after resume on r8169, as the BIOS resets
the chip into non-jumbo mode during suspend. From Heiner Kallweit.
7) Corrupt L2 header during MPLS push, from Davide Caratti.
8) Prevent possible infinite loop in tc_ctl_action, from Eric
Dumazet.
9) Get register bits right in bcmgenet driver, based upon chip
version. From Florian Fainelli.
10) Fix mutex problems in microchip DSA driver, from Marek Vasut.
11) Cure race between route lookup and invalidation in ipv4, from Wei
Wang.
12) Fix performance regression due to false sharing in 'net'
structure, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits)
net: reorder 'struct net' fields to avoid false sharing
net: dsa: fix switch tree list
net: ethernet: dwmac-sun8i: show message only when switching to promisc
net: aquantia: add an error handling in aq_nic_set_multicast_list
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
macb: propagate errors when getting optional clocks
xen/netback: fix error path of xenvif_connect_data()
net: hns3: fix mis-counting IRQ vector numbers issue
net: usb: lan78xx: Connect PHY before registering MAC
vsock/virtio: discard packets if credit is not respected
vsock/virtio: send a credit update when buffer size is changed
mlxsw: spectrum_trap: Push Ethernet header before reporting trap
net: ensure correct skb->tstamp in various fragmenters
net: bcmgenet: reset 40nm EPHY on energy detect
net: bcmgenet: soft reset 40nm EPHYs before MAC init
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
net: bcmgenet: don't set phydev->link from MAC
net: Update address for MediaTek ethernet driver in MAINTAINERS
ipv4: fix race condition between route lookup and invalidation
...
|
|
Intel test robot reported a ~7% regression on TCP_CRR tests
that they bisected to the cited commit.
Indeed, every time a new TCP socket is created or deleted,
the atomic counter net->count is touched (via get_net(net)
and put_net(net) calls)
So cpus might have to reload a contended cache line in
net_hash_mix(net) calls.
We need to reorder 'struct net' fields to move @hash_mix
in a read mostly cache line.
We move in the first cache line fields that can be
dirtied often.
We probably will have to address in a followup patch
the __randomize_layout that was added in linux-4.13,
since this might break our placement choices.
Fixes: 355b98553789 ("netns: provide pure entropy for net_hash_mix()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The action_get callback returns a Synapse's action mode.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The count_read and count_write callbacks are simplified to pass val as
unsigned long rather than as an opaque data structure. The opaque
counter_count_read_value and counter_count_write_value structures,
counter_count_value_type enum, and relevant counter_count_read_value_set
and counter_count_write_value_get functions, are removed as they are no
longer used.
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Immutable branch as considerable overlap with mfd, power and hwmon.
|
|
The AB8500 GPADC driver is indeed a "general purpose ADC" driver,
and while the IIO subsystem did not exist when the driver was
first merged, it is never too late to clean things up and move it
to the right place.
Nowadays IIO provides the right abstractions and interfaces to
do generic ADC work in the kernel.
We have to cut a bunch of debugfs luggage to make this transition
swift, but all these files to is read out the raw values of the
ADC and the IIO subsystem already has a standard sysfs ABI for
doing exactly this: no debugfs is needed.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes for the usual suspect, HD- and USB-audio:
enablement of runtime PM for Nvidia due to the recent PCI changes, a
fix for potential hangs with recent HD-audio platforms, and the rest
device-specific quirks"
* tag 'sound-5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Force runtime PM on Nvidia HDMI codecs
ALSA: hda/realtek - Enable headset mic on Asus MJ401TA
ALSA: usb-audio: Disable quirks for BOSS Katana amplifiers
ALSA: hdac: clear link output stream mapping
ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360
|
|
The introduction of Symbol Namespaces changed the naming schema of the
__ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol.
That caused some breakages in tools that depend on the name layout in
either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod
would not be able to read System.map without a patch to support symbol
namespaces. A warning reported by depmod for namespaced symbols would
look like
depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks
In order to address this issue, revert to the original naming scheme and
rather read the __kstrtabns_<symbol> entries and their corresponding
values from __ksymtab_strings to update the namespace values for
symbols. After having read all symbols and handled them in
handle_modversions(), the symbols are created. In a second pass, read
the __kstrtabns_ entries and update the namespaces accordingly.
Fixes: 8651ec01daed ("module: add support for symbol namespaces.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing here is a long-awaited workaround for a CPU erratum on
ThunderX2 which we have developed in conjunction with engineers from
Cavium/Marvell.
At the moment, the workaround is unconditionally enabled for affected
CPUs at runtime but we may add a command-line option to disable it in
future if performance numbers show up indicating a significant cost
for real workloads.
Summary:
- Work around Cavium/Marvell ThunderX2 erratum #219
- Fix regression in mlock() ABI caused by sign-extension of TTBR1 addresses
- More fixes to the spurious kernel fault detection logic
- Fix pathological preemption race when enabling some CPU features at boot
- Drop broken kcore macros in favour of generic implementations
- Fix userspace view of ID_AA64ZFR0_EL1 when SVE is disabled
- Avoid NULL dereference on allocation failure during hibernation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: tags: Preserve tags for addresses translated via TTBR1
arm64: mm: fix inverted PAR_EL1.F check
arm64: sysreg: fix incorrect definition of SYS_PAR_EL1_F
arm64: entry.S: Do not preempt from IRQ before all cpufeatures are enabled
arm64: hibernate: check pgd table allocation
arm64: cpufeature: Treat ID_AA64ZFR0_EL1 as RAZ when SVE is not enabled
arm64: Fix kcore macros after 52-bit virtual addressing fallout
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
|
|
The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches.
Update the PHY ID and name to reflect that, as this family of switches
is commonly refered to as KSZ87xx
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Workaround for Cavium/Marvell ThunderX2 erratum #219.
* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"The fixes pertain to a problem with initializing the Intel GPIO
irqchips when adding gpiochips.
Andy fixed it up elegantly by adding a hardware initialization
callback to the struct gpio_irq_chip so let's use this. Tested and
verified on the target hardware"
* tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: lynxpoint: set default handler to be handle_bad_irq()
gpio: merrifield: Move hardware initialization to callback
gpio: lynxpoint: Move hardware initialization to callback
gpio: intel-mid: Move hardware initialization to callback
gpiolib: Initialize the hardware with a callback
gpio: merrifield: Restore use of irq_base
|
|
[BUG]
For btrfs:qgroup_meta_reserve event, the trace event can output garbage:
qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2
qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=0x258792 diff=2
The @type can be completely garbage, as DATA type is not possible for
trace_qgroup_meta_reserve() trace event.
[CAUSE]
Ther are several problems related to qgroup trace events:
- Unassigned entry member
Member entry::type of trace_qgroup_update_reserve() and
trace_qgourp_meta_reserve() is not assigned
- Redundant entry member
Member entry::type is completely useless in
trace_qgroup_meta_convert()
Fixes: 4ee0d8832c2e ("btrfs: qgroup: Update trace events for metadata reservation")
CC: stable@vger.kernel.org # 4.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
the following script:
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress protocol ip matchall \
> action mpls push protocol mpls_uc label 0x355aa bos 1
causes corruption of all IP packets transmitted by eth0. On TC egress, we
can't rely on the value of skb->mac_len, because it's 0 and a MPLS 'push'
operation will result in an overwrite of the first 4 octets in the packet
L2 header (e.g. the Destination Address if eth0 is an Ethernet); the same
error pattern is present also in the MPLS 'pop' operation. Fix this error
in act_mpls data plane, computing 'mac_len' as the difference between the
network header and the mac header (when not at TC ingress), and use it in
MPLS 'push'/'pop' core functions.
v2: unbreak 'make htmldocs' because of missing documentation of 'mac_len'
in skb_mpls_pop(), reported by kbuild test robot
CC: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the possibility to enable/disable wakeup source through
st_sensors_platform_data and not only through device tree
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
|
|
After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.
Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.
This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix (Sphinx) kernel-doc warning in <linux/xarray.h>:
include/linux/xarray.h:232: WARNING: Unexpected indentation.
Link: http://lkml.kernel.org/r/89ba2134-ce23-7c10-5ee1-ef83b35aa984@infradead.org
Fixes: a3e4d3f97ec8 ("XArray: Redesign xa_alloc API")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in <linux/bitmap.h>:
include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
Also fix small typo (bitnaps).
Link: http://lkml.kernel.org/r/0729ea7a-2c0d-b2c5-7dd3-3629ee0803e2@infradead.org
Fixes: b9fa6442f704 ("cpumask: Implement cpumask_or_equal()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 37389167a281 ("mm, page_owner: keep owner info when freeing the
page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page
is tracked as being allocated. Kirril suggested naming it
PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat
loaded term for a page".
Link: http://lkml.kernel.org/r/20190930122916.14969-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "followups to debug_pagealloc improvements through
page_owner", v3.
These are followups to [1] which made it to Linus meanwhile. Patches 1
and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It
would be nice if all of this made it to 5.4 with [1] already there (or
at least Patch 1).
This patch (of 3):
As noted by Kirill, commit 7e2f2a0cd17c ("mm, page_owner: record page
owner for each subpage") has introduced an off-by-one error in
__set_page_owner_handle() when looking up page_ext for subpages. As a
result, the head page page_owner info is set twice, while for the last
tail page, it's not set at all.
Fix this and also make the code more efficient by advancing the page_ext
pointer we already have, instead of calling lookup_page_ext() for each
subpage. Since the full size of struct page_ext is not known at compile
time, we can't use a simple page_ext++ statement, so introduce a
page_ext_next() inline function for that.
Link: http://lkml.kernel.org/r/20190930122916.14969-2-vbabka@suse.cz
Fixes: 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Reported-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We want the staging driver fixes in here as well to build on and test
with.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_wmem_queued while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
sk_wmem_queued_add() helper is added so that we can in
the future convert to ADD_ONCE() or equivalent if/when
available.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_sndbuf while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
Note that other transports probably need similar fixes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For the sake of tcp_poll(), there are few places where we fetch
sk->sk_rcvbuf while this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make sure write
sides use corresponding WRITE_ONCE() to avoid store-tearing.
Note that other transports probably need similar fixes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are few places where we fetch tp->snd_nxt while
this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make
sure write sides use corresponding WRITE_ONCE() to avoid
store-tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are few places where we fetch tp->write_seq while
this field can change from IRQ or other cpu.
We need to add READ_ONCE() annotations, and also make
sure write sides use corresponding WRITE_ONCE() to avoid
store-tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both tcp_v4_err() and tcp_v6_err() do the following operations
while they do not own the socket lock :
fastopen = tp->fastopen_rsk;
snd_una = fastopen ? tcp_rsk(fastopen)->snt_isn : tp->snd_una;
The problem is that without appropriate barrier, the compiler
might reload tp->fastopen_rsk and trigger a NULL deref.
request sockets are protected by RCU, we can simply add
the missing annotations and barriers to solve the issue.
Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Update/fix inspur-ipsps1 and k10temp Documentation
- Fix nct7904 driver
- Fix HWMON_P_MIN_ALARM mask in hwmon core
* tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: docs: Extend inspur-ipsps1 title underline
hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct.
docs: hwmon: Include 'inspur-ipsps1.rst' into docs
hwmon: Fix HWMON_P_MIN_ALARM mask
hwmon: (k10temp) Update documentation and add temp2_input info
hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of IIO new device support, cleanups and features for the 5.5 cycle
Third version with the adis rework set dropped as better to just have
a fresh version of that at some future date.
The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.
Also a few trivial counter subsystem tidy ups on behalf of William.
Core new feature
* Device label support. A long requested feature no one got around to
implementing before. Allows DT based provision of a 'label' that
identifies a device uniquely within a system. This differs from existing
'name' which is meant to be the part number.
New device support
* ingenic-adc
- Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
- Add support for magnetometer in MPU925x parts.
Fiddly to do as this is actually a separate device sitting inside the
package, but with the master device being able to schedule reads etc.
Will only run if the auxiliary bus is not in use for any other devices.
Features
* ad7192
- Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
- Enable latched interrupts by default for sensors events with related clear.
- Motion events and related wakeup source. This needed quite a bit of
refactoring as well.
Cleanups and minor features
* ad7192
- sysfs ABI docs
* ad7949
- Remove code to readback configuration word as driver never actually enabled
it.
- Fix incorrect xfer length. Not actually known to cause problems other
than wasted bus usage.
* adis16080
- Replace core mlock usage with local lock with more appropriate scope.
* adis16130
- Remove pointless mlock usage.
* adis16240
- Remove include of gpio.h as no gpio usage.
* atlas-ph-sensor
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* bh1750
- Fix up a static compiler warning and make the code more readable.
- yaml conversion of binding + MAINTAINERS entry.
* bmp280
- Drop a stray newline.
* cm36651
- Drop a redundant assignment
* itg3200
- Alignment cleanup.
* max31856
- Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
- Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
- kernel-doc warning.
* stm32-timer counter
- kernel-doc warning.
- Alignment cleanup.
* sx9500
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tcs3414
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
iio: pressure: bmp280: remove stray newline
iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
iio: gyro: clean up indentation issue
counter: stm32: clean up indentation issue
iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
iio: core: Add optional symbolic label to device attributes
dt-binding: iio: Add optional label property
iio: gyro: adis16080: replace mlock with own lock
counter: stm32-lptimer-cnt: fix a kernel-doc warning
counter: stm32-timer-cnt: fix a kernel-doc warning
iio: gyro: adis16130: remove mlock usage
MAINTAINERS: add entry for ROHM BH1750 driver
dt-bindings: iio: light: bh1750: convert bindings to yaml
iio: imu: st_lsm6dsx: add motion report function and call from interrupt
iio: imu: st_lsm6dsx: always enter interrupt thread
iio: imu: st_lsm6dsx: add wakeup-source option
iio: imu: st_lsm6dsx: add motion events
iio: imu: st_lsm6dsx: move interrupt thread to core
iio: imu: inv_mpu6050: add fifo support for magnetometer data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.4-rc3 that
resolve a number of reported issues and regressions.
None of these are huge, full details are in the shortlog. There's also
a MAINTAINERS update that I think you might have already taken in your
tree already, but git should handle that merge easily.
All have been in linux-next with no reported issues"
* tag 'tty-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
MAINTAINERS: kgdb: Add myself as a reviewer for kgdb/kdb
tty: serial: imx: Use platform_get_irq_optional() for optional IRQs
serial: fix kernel-doc warning in comments
serial: 8250_omap: Fix gpio check for auto RTS/CTS
serial: mctrl_gpio: Check for NULL pointer
tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()
tty: serial: Fix PORT_LINFLEXUART definition
tty: n_hdlc: fix build on SPARC
serial: uartps: Fix uartps_major handling
serial: uartlite: fix exit path null pointer
tty: serial: linflexuart: Fix magic SysRq handling
serial: sh-sci: Use platform_get_irq_optional() for optional interrupts
dt-bindings: serial: sh-sci: Document r8a774b1 bindings
serial/sifive: select SERIAL_EARLYCON
tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'
tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for
years as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues"
* tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits)
USB: yurex: fix NULL-derefs on disconnect
USB: iowarrior: use pr_err()
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: chaoskey: fix use-after-free on release
USB: adutux: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: legousbtower: fix use-after-free on release
usb: cdns3: Fix for incorrect DMA mask.
usb: cdns3: fix cdns3_core_init_role()
usb: cdns3: gadget: Fix full-speed mode
USB: usb-skeleton: drop redundant in-urb check
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: dwc3: Remove dev_err() on platform_get_irq() failure
usb: dwc3: Switch to platform_get_irq_byname_optional()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes all across the map: CPER error report fixes, fixes to
TPM event log parsing, fix for a kexec hang, a Sparse fix and other
fixes"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/tpm: Fix sanity check of unsigned tbl_size being less than zero
efi/x86: Do not clean dummy variable in kexec path
efi: Make unexported efi_rci2_sysfs_init() static
efi/tpm: Only set 'efi_tpm_final_log_size' after successful event log parsing
efi/tpm: Don't traverse an event log with no events
efi/tpm: Don't access event->count when it isn't mapped
efivar/ssdt: Don't iterate over EFI vars if no SSDT override was specified
efi/cper: Fix endianness of PCIe class code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A handful of fixes: a kexec linking fix, an AMD MWAITX fix, a vmware
guest support fix when built under Clang, and new CPU model number
definitions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Comet Lake to the Intel CPU models header
lib/string: Make memzero_explicit() inline instead of external
x86/cpu/vmware: Use the full form of INL in VMWARE_PORT
x86/asm: Fix MWAITX C-state hint value
|
|
Pull NFS client bugfixes from Anna Schumaker:
"Stable bugfixes:
- Fix O_DIRECT accounting of number of bytes read/written # v4.1+
Other fixes:
- Fix nfsi->nrequests count error on nfs_inode_remove_request()
- Remove redundant mirror tracking in O_DIRECT
- Fix leak of clp->cl_acceptor string
- Fix race to sk_err after xs_error_report"
* tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix race to sk_err after xs_error_report
NFSv4: Fix leak of clp->cl_acceptor string
NFS: Remove redundant mirror tracking in O_DIRECT
NFS: Fix O_DIRECT accounting of number of bytes read/written
nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
|
|
Reserve the pseudo keyword 'fallthrough' for the ability to convert the
various case block /* fallthrough */ style comments to appear to be an
actual reserved word with the same gcc case block missing fallthrough
warning capability.
All switch/case blocks now should end in one of:
break;
fallthrough;
goto <label>;
return [expression];
continue;
In C mode, GCC supports the __fallthrough__ attribute since 7.1,
the same time the warning and the comment parsing were introduced.
fallthrough devolves to an empty "do {} while (0)" if the compiler
version (any version less than gcc 7) does not support the attribute.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
