summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "I'm hoping this is the very last batch of networking fixes for 3.13, here goes nothing: 1) Fix crashes in VLAN's header_ops passthru. 2) Bridge multicast code needs to use BH spinlocks to prevent deadlocks with timers. From Curt Brune. 3) ipv6 tunnels lack proper synchornization when updating percpu statistics. From Li RongQing. 4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal Kalderon. 5) Avoid undefined operator evaluation order in llc code, from Daniel Borkmann. 6) Error paths in various GSO offload paths do not unwind properly, in particular they must undo any modifications they have made to the SKB. From Wei-Chun Chao. 7) Fix RX refill races during restore in virtio-net, from Jason Wang. 8) Fix SKB use after free in LLC code, from Daniel Borkmann. 9) Missing unlock and OOPS in netpoll code when VLAN tag handling fails. 10) Fix vxlan device attachment wrt ipv6, from Fan Du. 11) Don't allow creating infiniband links to non-infiniband devices, from Hangbin Liu. 12) Revert FEC phy reset active low change, it breaks things. From Fabio Estevam. 13) Fix header pointer handling in 6lowpan header building code, from Daniel Borkmann. 14) Fix RSS handling in be2net driver, from Vasundhara Volam. 15) Fix modem port indexing in HSO driver, from Dan Williams" * http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) bridge: use spin_lock_bh() in br_multicast_set_hash_max ipv6: don't install anycast address for /128 addresses on routers hso: fix handling of modem port SERIAL_STATE notifications isdn: Drop big endian cpp checks from telespci and hfc_pci drivers be2net: fix max_evt_qs calculation for BE3 in SR-IOV config be2net: increase the timeout value for loopback-test FW cmd be2net: disable RSS when number of RXQs is reduced to 1 via set-channels xen-netback: Include header for vmalloc net: 6lowpan: fix lowpan_header_create non-compression memcpy call fec: Revert "fec: Do not assume that PHY reset is active low" bnx2x: fix VLAN configuration for VFs. bnx2x: fix AFEX memory overflow bnx2x: Clean before update RSS arrives bnx2x: Correct number of MSI-X vectors for VFs bnx2x: limit number of interrupt vectors for 57711 qlcnic: Fix bug in Tx completion path infiniband: make sure the src net is infiniband when create new link {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly cxgb4: allow large buffer size to have page size netpoll: Fix missing TXQ unlock and and OOPS. ...
2014-01-03Merge tag 'pm+acpi-3.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PM fixes and new device IDs from Rafael Wysocki: "These commits, except for one, are regression fixes and the remaining one fixes a divide error leading to a kernel panic. The majority of the regressions fixed here were introduced during the 3.12 cycle, one of them is from this cycle and one is older. Specifics: - VGA switcheroo was broken for some users as a result of the ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some previously ignored hotplug events started to be handled. The fix causes them to be ignored again. - There are two more issues related to cpufreq's suspend/resume handling changes from the 3.12 cycle addressed by Viresh Kumar's fixes. - intel_pstate triggers a divide error in a timer function if the P-state information it needs is missing during initialization. This leads to kernel panics on nested KVM clients and is fixed by failing the initialization cleanly in those cases. - PCI initalization code changes during the 3.9 cycle uncovered BIOS issues related to ACPI wakeup notifications (some BIOSes send them for devices that aren't supposed to support ACPI wakeup). Work around them by installing an ACPI wakeup notify handler for all PCI devices with ACPI support. - The Calxeda cpuilde driver's probe function is tagged as __init, which is incorrect and causes a section mismatch to occur during build. Fix from Andre Przywara removes the __init tag from there. - During the 3.12 cycle ACPIPHP started to print warnings about missing _ADR for devices that legitimately don't have it. Fix from Toshi Kani makes it only print the warnings where they make sense" * tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug intel_pstate: Fail initialization if P-state information is missing ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI cpufreq: preserve user_policy across suspend/resume cpufreq: Clean up after a failing light-weight initialization ACPI / PCI / hotplug: Avoid warning when _ADR not present
2014-01-02ipv4: fix tunneled VM traffic over hw VXLAN/GRE GSO NICWei-Chun Chao
VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-02sctp: Remove outqueue empty stateVlad Yasevich
The SCTP outqueue structure maintains a data chunks that are pending transmission, the list of chunks that are pending a retransmission and a length of data in flight. It also tries to keep the emtpy state so that it can performe shutdown sequence or notify user. The problem is that the empy state is inconsistently tracked. It is possible to completely drain the queue without sending anything when using PR-SCTP. In this case, the empty state will not be correctly state as report by Jamal Hadi Salim <jhs@mojatatu.com>. This can cause an association to be perminantly stuck in the SHUTDOWN_PENDING state. Additionally, SCTP is incredibly inefficient when setting the empty state. Even though all the data is availaible in the outqueue structure, we ignore it and walk a list of trasnports. In the end, we can completely remove the extra empty state and figure out if the queue is empty by looking at 3 things: length of pending data, length of in-flight data, and exisiting of retransmit data. All of these are already in the strucutre. Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01net: llc: fix order of evaluation in llc_conn_ac_inc_vr_by_1Daniel Borkmann
Function llc_conn_ac_inc_vr_by_1() evaluates via macro PDU_GET_NEXT_Vr() into ... llc_sk(sk)->vR = ++llc_sk(sk)->vR & 0xffffffffffffff7f ... but the order in which the side effects take place is undefined because there is no intervening sequence point. As llc_sk(sk)->vR is written in llc_sk(sk)->vR (assignment left-hand side) and written in ++llc_sk(sk)->vR & 0xffffffffffffff7f this might possibly yield undefined behavior. The final value of llc_sk(sk)->vR is ambiguous, because, depending on the order of expression evaluation, the increment may occur before, after, or interleaved with the assignment. In C, evaluating such an expression yields undefined behavior. Since we're doing the increment via PDU_GET_NEXT_Vr() macro and the only place it is being used is from llc_conn_ac_inc_vr_by_1(), in order to increment vR by 1 with a follow-up optimized modulo, rewrite the expression into ((vR + 1) & CONST) in order to fix this. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull radeon drm fixes from Dave Airlie: "Just piping a bunch of fixes from pre-xmas from Alex for radeon, all either fix bad hw setup issues or regressions" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Bump version for CIK DCE tiling fix drm/radeon: set correct number of banks for CIK chips in DCE drm/radeon: set correct pipe config for Hawaii in DCE drm/radeon: expose render backend mask to the userspace drm/radeon: fix render backend setup for SI and CIK drm/radeon: 0x9649 is SUMO2 not SUMO drm/radeon: fix UVD 256MB check
2014-01-01Merge branch 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Radeon fixes, Christmas eve edition. Fix incorrect family for 0x9649 which lead to bogus rendering, tiling and RB fixes for SI and CIK, and a UVD fix. * 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Bump version for CIK DCE tiling fix drm/radeon: set correct number of banks for CIK chips in DCE drm/radeon: set correct pipe config for Hawaii in DCE drm/radeon: expose render backend mask to the userspace drm/radeon: fix render backend setup for SI and CIK drm/radeon: 0x9649 is SUMO2 not SUMO drm/radeon: fix UVD 256MB check
2013-12-31vlan: Fix header ops passthru when doing TX VLAN offload.David S. Miller
When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31Merge branches 'acpi-pci-pm' and 'acpi-pci-hotplug'Rafael J. Wysocki
* acpi-pci-pm: PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI * acpi-pci-hotplug: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug ACPI / PCI / hotplug: Avoid warning when _ADR not present
2013-12-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A fix for a panic in gpio-keys driver when set up with absolute events, a fixup to the new zforce driver and a new keycode definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: allocate absinfo data when setting ABS capability Input: define KEY_WWAN for Wireless WAN Input: zforce - fix possible driver hang during suspend
2013-12-31ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplugRafael J. Wysocki
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
2013-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Some holiday bug fixes for 3.13... There is still one bug I'd like to get fixed before 3.13-final. The vlan code erroneously assignes the header ops of the underlying real device to the VLAN device above it when the real device can hardware offload VLAN handling. That's completely bogus because header ops are tied to the device type, so they only expect to see a 'dev' argument compatible with their ops. The fix is the have the VLAN code use a special set of header ops that does the pass-thru correctly, by calling the underlying real device's header ops but _also_ passing in the real device instead of the VLAN device. That fix is currently waiting some testing. Anyways, of note here: 1) Fix bitmap edge case in radiotap, from Johannes Berg. 2) Fix oops on driver unload in rtlwifi, from Larry Finger. 3) Bonding doesn't do locking correctly during speed/duplex/link changes, from Ding Tianhong. 4) Fix header parsing in GRE code, this bug has been around for a few releases. From Timo Teräs. 5) SIT tunnel driver MTU check needs to take GSO into account, from Eric Dumazet. 6) Minor info leak in inet_diag, from Daniel Borkmann. 7) Info leak in YAM hamradio driver, from Salva Peiró. 8) Fix route expiration state handling in ipv6 routing code, from Li RongQing. 9) DCCP probe module does not check request_module()'s return value, from Wang Weidong. 10) cpsw driver passes NULL device names to request_irq(), from Mugunthan V N. 11) Prevent a NULL splat in RDS binding code, from Sasha Levin. 12) Fix 4G overflow test in tg3 driver, from Nithin Sujir. 13) Cure use after free in arc_emac and fec driver's software timestamp handling, from Eric Dumazet. 14) SIT driver can fail to release the route when iptunnel_handle_offloads() throws an error. From Li RongQing. 15) Several batman-adv fixes from Simon Wunderlich and Antonio Quartulli. 16) Fix deadlock during TIPC socket release, from Ying Xue. 17) Fix regression in ROSE protocol recvmsg() msg_name handling, from Florian Westphal. 18) stmmac PTP support releases wrong spinlock, from Vince Bridgers" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) stmmac: Fix incorrect spinlock release and PTP cap detection. phy: IRQ cannot be shared net: rose: restore old recvmsg behavior xen-netback: fix guest-receive-side array sizes fec: Do not assume that PHY reset is active low tipc: fix deadlock during socket release netfilter: nf_tables: fix wrong datatype in nft_validate_data_load() batman-adv: fix vlan header access batman-adv: clean nf state when removing protocol header batman-adv: fix alignment for batadv_tvlv_tt_change batman-adv: fix size of batadv_bla_claim_dst batman-adv: fix size of batadv_icmp_header batman-adv: fix header alignment by unrolling batadv_header batman-adv: fix alignment for batadv_coded_packet netfilter: nf_tables: fix oops when updating table with user chains netfilter: nf_tables: fix dumping with large number of sets ipv6: release dst properly in ipip6_tunnel_xmit netxen: Correct off-by-one errors in bounds checks net: Add some clarification to skb_tx_timestamp() comment. arc_emac: fix potential use after free ...
2013-12-27net: Add some clarification to skb_tx_timestamp() comment.David S. Miller
We've seen so many instances of people invoking skb_tx_timestamp() after the device already has been given the packet, that it's worth being a little bit more verbose and explicit in this comment. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-24Merge branch 'for-3.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu fix from Tejun Heo: "A single commit to fix a spurious sparse warning coming from DEFINE_PER_CPU()'s hack to support the use of weak symbols. Shouldn't cause observable behavior change" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix spurious sparse warnings from DEFINE_PER_CPU()
2013-12-24Merge branch 'for-3.13-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "There's one interseting commit - "libata, freezer: avoid block device removal while system is frozen". It's an ugly hack working around a deadlock condition between driver core resume and block layer device removal paths through freezer which was made more reproducible by writeback being converted to workqueue some releases ago. The bug has nothing to do with libata but it's just an workaround which is easy to backport. After discussion, Rafael and I seem to agree that we don't really need kernel freezables - both kthread and workqueue. There are few specific workqueues which constitute PM operations and require freezing, which will be converted to use workqueue_set_max_active() instead. All other kernel freezer uses are planned to be removed, followed by the removal of kthread and workqueue freezer support, hopefully. Others are device-specific fixes. The most notable is the addition of NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro M500 SSDs which otherwise suffers data corruption" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata, freezer: avoid block device removal while system is frozen libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs libata: disable a disk via libata.force params ahci: bail out on ICH6 before using AHCI BAR ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
2013-12-24auxvec.h: account for AT_HWCAP2 in AT_VECTOR_SIZE_BASEArd Biesheuvel
Commit 2171364d1a92 ("powerpc: Add HWCAP2 aux entry") introduced a new AT_ auxv entry type AT_HWCAP2 but failed to update AT_VECTOR_SIZE_BASE accordingly. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2171364d1a92 (powerpc: Add HWCAP2 aux entry) Cc: stable@vger.kernel.org Acked-by: Michael Neuling <michael@neuling.org> Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: "Last batch of InfiniBand/RDMA changes for 3.13 / 2014: - Additional checks for uverbs to ensure forward compatibility, handle malformed input better. - Fix potential use-after-free in iWARP connection manager. - Make a function static" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/uverbs: Check access to userspace response buffer in extended command IB/uverbs: Check input length in flow steering uverbs IB/uverbs: Set error code when fail to consume all flow_spec items IB/uverbs: Check reserved fields in create_flow IB/uverbs: Check comp_mask in destroy_flow IB/uverbs: Check reserved field in extended command header IB/uverbs: New macro to set pointers to NULL if length is 0 in INIT_UDATA() IB/core: const'ify inbuf in struct ib_udata RDMA/iwcm: Don't touch cm_id after deref in rem_ref RDMA/cxgb4: Make _c4iw_write_mem_dma() static
2013-12-23drm/radeon: expose render backend mask to the userspaceMarek Olšák
This will allow userspace to correctly program the PA_SC_RASTER_CONFIG register, so it can be considered a fix. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-23drm/radeon: 0x9649 is SUMO2 not SUMOAlex Deucher
Fixes rendering corruption due to incorrect gfx configuration. bug: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor items this time around, the most notable being a FILEIO backend change to enforce hw_max_sectors based upon the current block_size to address a bug where large sized I/Os (> 1M) where being rejected" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment qla2xxx: Fix schedule_delayed_work() for target timeout calculations iser-target: fix error return code in isert_create_device_ib_res() iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set target: Remove write-only stats fields and lock from struct se_node_acl iscsi-target: return -EINVAL on oversized configfs parameter
2013-12-21aio/migratepages: make aio migrate pages saneBenjamin LaHaise
The arbitrary restriction on page counts offered by the core migrate_page_move_mapping() code results in rather suspicious looking fiddling with page reference counts in the aio_migratepage() operation. To fix this, make migrate_page_move_mapping() take an extra_count parameter that allows aio to tell the code about its own reference count on the page being migrated. While cleaning up aio_migratepage(), make it validate that the old page being passed in is actually what aio_migratepage() expects to prevent misbehaviour in the case of races. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-12-20pstore: Don't allow high traffic options on fragile devicesLuck, Tony
Some pstore backing devices use on board flash as persistent storage. These have limited numbers of write cycles so it is a poor idea to use them from high frequency operations. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20mm: do not allocate page->ptl dynamically, if spinlock_t fits to longKirill A. Shutemov
In struct page we have enough space to fit long-size page->ptl there, but we use dynamically-allocated page->ptl if size(spinlock_t) is larger than sizeof(int). It hurts 64-bit architectures with CONFIG_GENERIC_LOCKBREAK, where sizeof(spinlock_t) == 8, but it easily fits into struct page. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) supportKirill A. Shutemov
Sasha Levin found a NULL pointer dereference that is due to a missing page table lock, which in turn is due to the pmd entry in question being a transparent huge-table entry. The code - introduced in commit 1998cc048901 ("mm: make madvise(MADV_WILLNEED) support swap file prefetch") - correctly checks for this situation using pmd_none_or_trans_huge_or_clear_bad(), but it turns out that that function doesn't work correctly. pmd_none_or_trans_huge_or_clear_bad() expected that pmd_bad() would trigger if the transparent hugepage bit was set, but it doesn't do that if pmd_numa() is also set. Note that the NUMA bit only gets set on real NUMA machines, so people trying to reproduce this on most normal development systems would never actually trigger this. Fix it by removing the very subtle (and subtly incorrect) expectation, and instead just checking pmd_trans_huge() explicitly. Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> [ Additionally remove the now stale test for pmd_trans_huge() inside the pmd_bad() case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20Merge tag 'stable/for-linus-3.13-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: - Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use scratch pages. - Fix block API header for ARM32 and ARM64 to have proper layout - On ARM when mapping guests, stick on PTE_SPECIAL - When using SWIOTLB under ARM, don't call swiotlb functions twice - When unmapping guests memory and if we fail, don't return pages which failed to be unmapped. - Grant driver was using the wrong address on ARM. * tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Seperate the auto-translate logic properly (v2) xen/block: Correctly define structures in public headers on ARM32 and ARM64 arm: xen: foreign mapping PTEs are special. xen/arm64: do not call the swiotlb functions twice xen: privcmd: do not return pages which we have failed to unmap XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
2013-12-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to net, ixgbe and e1000e. David provides compiler fixes for e1000e. Don provides a fix for ixgbe to resolve a compile warning. John provides a fix to net where it is useful to be able to walk all upper devices when bringing a device online where the RTNL lock is held. In this case, it is safe to walk the all_adj_list because the RTNL lock is used to protect the write side as well. This patch adds a check to see if the RTNL lock is held before throwing a warning in netdev_all_upper_get_next_dev_rcu(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "An ABI documentation fix, and a mixed-PMU perf-info-corruption fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Document the new transaction sample type perf: Disable all pmus on unthrottling and rescheduling
2013-12-19target/file: Update hw_max_sectors based on current block_sizeNicholas Bellinger
This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by: Henrik Goldman <hg@x-formation.com> Cc: <stable@vger.kernel.org> #3.5+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-18Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge patches from Andrew Morton: "23 fixes and a MAINTAINERS update" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits) mm/hugetlb: check for pte NULL pointer in __page_check_address() fix build with make 3.80 mm/mempolicy: fix !vma in new_vma_page() MAINTAINERS: add Davidlohr as GPT maintainer mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully mm/compaction: respect ignore_skip_hint in update_pageblock_skip mm/mempolicy: correct putback method for isolate pages if failed mm: add missing dependency in Kconfig sh: always link in helper functions extracted from libgcc mm: page_alloc: exclude unreclaimable allocations from zone fairness policy mm: numa: defer TLB flush for THP migration as long as possible mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates mm: fix TLB flush race between migration, and change_protection_range mm: numa: avoid unnecessary disruption of NUMA hinting during migration mm: numa: clear numa hinting information on mprotect sched: numa: skip inaccessible VMAs mm: numa: avoid unnecessary work on the failure path mm: numa: ensure anon_vma is locked to prevent parallel THP splits mm: numa: do not clear PTE for pte_numa update mm: numa: do not clear PMD during PTE update scan ...
2013-12-18mm: numa: guarantee that tlb_flush_pending updates are visible before page ↵Mel Gorman
table updates According to documentation on barriers, stores issued before a LOCK can complete after the lock implying that it's possible tlb_flush_pending can be visible after a page table update. As per revised documentation, this patch adds a smp_mb__before_spinlock to guarantee the correct ordering. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18mm: fix TLB flush race between migration, and change_protection_rangeRik van Riel
There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18mm: numa: avoid unnecessary disruption of NUMA hinting during migrationMel Gorman
do_huge_pmd_numa_page() handles the case where there is parallel THP migration. However, by the time it is checked the NUMA hinting information has already been disrupted. This patch adds an earlier check with some helpers. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18kexec: migrate to reboot cpuVivek Goyal
Commit 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel") moved reboot= handling to generic code. In the process it also removed the code in native_machine_shutdown() which are moving reboot process to reboot_cpu/cpu0. I guess that thought must have been that all reboot paths are calling migrate_to_reboot_cpu(), so we don't need this special handling. But kexec reboot path (kernel_kexec()) is not calling migrate_to_reboot_cpu() so above change broke kexec. Now reboot can happen on non-boot cpu and when INIT is sent in second kerneo to bring up BP, it brings down the machine. So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid this problem. Bisected by WANG Chao. Reported-by: Matthew Whitehead <mwhitehe@redhat.com> Reported-by: Dave Young <dyoung@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Tested-by: WANG Chao <chaowang@redhat.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18ip_gre: fix msg_name parsing for recvfrom/recvmsgTimo Teräs
ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17net: allow netdev_all_upper_get_next_dev_rcu with rtnl lock heldJohn Fastabend
It is useful to be able to walk all upper devices when bringing a device online where the RTNL lock is held. In this case it is safe to walk the all_adj_list because the RTNL lock is used to protect the write side as well. This patch adds a check to see if the rtnl lock is held before throwing a warning in netdev_all_upper_get_next_dev_rcu(). Also because we now have a call site for lockdep_rtnl_is_held() outside COFIG_LOCK_PROVING an inline definition returning 1 is needed. Similar to the rcu_read_lock_is_held(). Fixes: 2a47fa45d4df ("ixgbe: enable l2 forwarding acceleration for macvlans") CC: Veaceslav Falico <vfalico@redhat.com> Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-17Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Definitely seems quieter this week, Radeon, intel, intel broadwell, vmwgfx, ttm, armada, and a couple of core fixes, one revert in radeon Most of these are either going to stable or fixes for things introduced in the merge window" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebook drm/ttm: Fix accesses through vmas with only partial coverage drm/nouveau: only runtime suspend by default in optimus configuration drm: don't double-free on driver load error Revert "drm/radeon: Implement radeon_pci_shutdown" drm/radeon: add missing display tiling setup for oland drm/radeon: fix typo in cik_copy_dma drm/radeon/cik: plug in missing blit callback drm/radeon/dpm: Fix hwmon crash drm/radeon: Fix sideport problems on certain RS690 boards drm/i915: don't update the dri1 breadcrumb with modesetting DRM: Armada: prime refcounting bug fix DRM: Armada: fix printing of phys_addr_t/dma_addr_t DRM: Armada: destroy framebuffer after helper DRM: Armada: implement lastclose() for fbhelper drm/i915: Repeat eviction search after idling the GPU drm/vmwgfx: Add max surface memory param drm/i915: Fix use-after-free in do_switch drm/i915: fix pm init ordering drm/i915: Hold mutex across i915_gem_release ...
2013-12-17Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Three fixes for scheduler crashes, each triggers in relatively rare, hardware environment dependent situations" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Rework sched_fair time accounting math64: Add mul_u64_u32_shr() sched: Remove PREEMPT_NEED_RESCHED from generic code sched: Initialize power_orig for overlapping groups
2013-12-17perf: Document the new transaction sample typeVince Weaver
Commit fdfbbd07e91f8fe3871 ("perf: Add generic transaction flags") added support for PERF_SAMPLE_TRANSACTION but forgot to add documentation for the sample type to include/uapi/linux/perf_event.h Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1312131548450.10372@pianoman.cluster.toy Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-17libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDsMarc Carino
Certain drives cannot handle queued TRIM commands properly, even though support is indicated in the IDENTIFY DEVICE buffer. This patch allows for disabling the commands for the affected drives and apply it to the Micron/Crucial M500 SSDs which exhibit incorrect protocol behavior when issued queued TRIM commands, which could lead to silent data corruption. tj: Merged two unnecessarily split patches and made minor edits including shortening horkage name. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/g/1387246554-7311-1-git-send-email-marc.ceeeee@gmail.com Cc: stable@vger.kernel.org # 3.12+
2013-12-16IB/core: const'ify inbuf in struct ib_udataYann Droneaud
Userspace input buffer is not modified by kernel, so it can be 'const'. This is also a prerequisite to remove the implicit cast from INIT_UDATA(). Link: http://marc.info/?i=cover.1386798254.git.ydroneaud@opteya.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-16Input: define KEY_WWAN for Wireless WANRafał Miłecki
Some devices with support for mobile networks may have buttons for enabling/disabling such connection. An example can be Linksys router 54G3G. We already have KEY_BLUETOOTH, KEY_WLAN and KEY_UWB so it makes sense to add KEY_WWAN as well. As we already have KEY_WIMAX, use it's value for KEY_WWAN and make it an alias. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't figure out why it breaks things. 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it was basically doing "x == x", from Dave Jones. 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from Sebastian Siewior. 4) Blackhole and prohibit routes in ipv6 were not doing the right thing because their ->input and ->output methods were not being assigned correctly. Now they behave properly like their ipv4 counterparts. From Kamala R. 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but really do not support this feature and will send garbage packets if fed fraglist SKBs. From Eric Dumazet. 6) Fix long standing user triggerable BUG_ON over loopback in RDS protocol stack, from Venkat Venkatsubra. 7) Several not so common code paths can potentially try to invoke packet scheduler actions that might be NULL without checking. Shore things up by either 1) defining a method as mandatory and erroring on registration if that method is NULL 2) defininig a method as optional and the registration function hooks up a default implementation when NULL is seen. From Jamal Hadi Salim. 8) Fix fragment detection in xen-natback driver, from Paul Durrant. 9) Kill dangling enter_memory_pressure method in cg_proto ops, from Eric W Biederman. 10) SKBs that traverse namespaces should have their local_df cleared, from Hannes Frederic Sowa. 11) IOCB file position is not being updated by macvtap_aio_read() and tun_chr_aio_read(). From Zhi Yong Wu. 12) Don't free virtio_net netdev before releasing all of the NAPI instances. From Andrey Vagin. 13) Procfs entry leak in xt_hashlimit, from Sergey Popovich. 14) IPv6 routes that are no cached routes should not count against the garbage collection limits. We had this almost right, but were missing handling addrconf generated routes properly. From Hannes Frederic Sowa. 15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL route info when they are called, from Stefan Tomanek. 16) TUN and MACVTAP have had truncated packet signalling for some time, fix from Jason Wang. 17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet. 18) xen-netback does not interpret the NAPI budget properly for TX work, fix from Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference xen-netback: fix gso_prefix check net: make neigh_priv_len in struct net_device 16bit instead of 8bit drivers: net: cpsw: fix for cpsw crash when build as modules xen-netback: napi: don't prematurely request a tx event xen-netback: napi: fix abuse of budget sch_tbf: use do_div() for 64-bit divide udp: ipv4: must add synchronization in udp_sk_rx_dst_set() net:fec: remove duplicate lines in comment about errata ERR006358 Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature xen-netback: make sure skb linear area covers checksum field net: smc91x: Fix device tree based configuration so it's usable udp: ipv4: fix potential use after free in udp_v4_early_demux() macvtap: signal truncated packets tun: unbreak truncated packet signalling net: sched: htb: fix the calculation of quantum net: sched: tbf: fix the calculation of max_size micrel: add support for KSZ8041RNLI ...
2013-12-15Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This is a pretty small batch: The biggest single change is to stop using EFI time services on 32-bit platforms. This matches our current behavior on 64-bit platforms as we already had ruled them out there as being too unreliable. Turns out that affects 32-bit platforms, too. One NULL pointer fix for SGI UV. Two minor build fixes, one of which only affects icc and the other which affects icc and future versions or nonstandard default settings of gcc" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Don't use (U)EFI time services on 32 bit x86, build, icc: Remove uninitialized_var() from compiler-intel.h x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used x86, build: Pass in additional -mno-mmx, -mno-sse options
2013-12-15Merge tag 'pci-v3.13-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI device hotplug - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael Wysocki) Host bridge drivers - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn Helgaas) - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin (Jason Gunthorpe) Miscellaneous - Avoid unnecessary CPU switch when calling .probe() (Alexander Duyck) - Revert "workqueue: allow work_on_cpu() to be called recursively" (Bjorn Helgaas) - Disable Bus Master only on kexec reboot (Khalid Aziz) - Omit PCI ID macro strings to shorten quirk names for LTO (Michal Marek)" * tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers PCI: Disable Bus Master only on kexec reboot PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin PCI: Omit PCI ID macro strings to shorten quirk names PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Revert "workqueue: allow work_on_cpu() to be called recursively" PCI: Avoid unnecessary CPU switch when calling driver .probe() method
2013-12-13xen/block: Correctly define structures in public headers on ARM32 and ARM64Julien Grall
On ARM (32 bits and 64 bits), the double-word is 8-bytes aligned. This will result on different structure from Xen and Linux repositories. As Linux is using __packed__ attribute, it must have a 4-bytes padding before each "id" field. This change breaks guest block support with older kernel. IMHO, it's acceptable because Xen on ARM is still on Tech Preview and the hypercall ABI is not yet freezed. Only one architecture (x86_32) doesn't have 64-bit ABI for the block interface. Don't add padding if Linux is compiled for this architecture. Signed-off-by: Julien Grall <julien.grall@linaro.org> Acked-by: Roger Pau Monne <roger.pau@citrix.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [I had asked for confirmation that it did not break x86 and Ian went beyound the call of duty to confirm it. Also a internal regression bucket with 32/64 dom0 with 32/64 domU (PV and HVM) confirmed no regressions. ABI changes are a drag..] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-12-12Merge branch 'akpm' (fixes from Andrew)Linus Torvalds
Merge patches from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: memcg: do not allow task about to OOM kill to bypass the limit mm: memcg: fix race condition between memcg teardown and swapin thp: move preallocated PTE page table on move_huge_pmd() mfd/rtc: s5m: fix register updating by adding regmap for RTC rtc: s5m: enable IRQ wake during suspend rtc: s5m: limit endless loop waiting for register update rtc: s5m: fix unsuccesful IRQ request during probe drivers/rtc/rtc-s5m.c: fix info->rtc assignment include/linux/kernel.h: make might_fault() a nop for !MMU drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap procfs: also fix proc_reg_get_unmapped_area() for !MMU case mm: memcg: do not declare OOM from __GFP_NOFAIL allocations include/linux/hugetlb.h: make isolate_huge_page() an inline
2013-12-12mfd/rtc: s5m: fix register updating by adding regmap for RTCKrzysztof Kozlowski
Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and add new regmap for RTC. On S5M8767A registers were not properly updated and read due to usage of the same regmap as the PMIC. This could be observed in various hangs, e.g. in infinite loop during waiting for UDR field change. On this chip family the RTC has different I2C address than PMIC so additional regmap is needed. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@linaro.org> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12include/linux/kernel.h: make might_fault() a nop for !MMUAxel Lin
The machine cannot fault if !MUU, so make might_fault() a nop for !MMU. This fixes below build error if !CONFIG_MMU && (CONFIG_PROVE_LOCKING=y || CONFIG_DEBUG_ATOMIC_SLEEP=y): arch/arm/kernel/built-in.o: In function `arch_ptrace': arch/arm/kernel/ptrace.c:852: undefined reference to `might_fault' arch/arm/kernel/built-in.o: In function `restore_sigframe': arch/arm/kernel/signal.c:173: undefined reference to `might_fault' ... arch/arm/kernel/built-in.o:arch/arm/kernel/signal.c:177: more undefined references to `might_fault' follow make: *** [vmlinux] Error 1 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-12include/linux/hugetlb.h: make isolate_huge_page() an inlineNaoya Horiguchi
With CONFIG_HUGETLBFS=n: mm/migrate.c: In function `do_move_page_to_node_array': include/linux/hugetlb.h:140:33: warning: statement with no effect [-Wunused-value] #define isolate_huge_page(p, l) false ^ mm/migrate.c:1170:4: note: in expansion of macro `isolate_huge_page' isolate_huge_page(page, &pagelist); Reported-by: Borislav Petkov <bp@alien8.de> Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>