Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* revert NETIF_F_LLTX usage as it caused problems
* avoid warning on WMM parameters from AP that are too short
* fix possible null-ptr dereference in hwsim
* fix interface combinations with 4-addr and crypto control
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) memleak in ebtables from the error path for the 32/64 compat layer,
from Florian Westphal.
2) Fix inverted meta ifname/ifidx matching when no interface is set
on either from the input/output path, from Phil Sutter.
3) Remove goto label in nft_meta_bridge, also from Phil.
4) Missing include guard in xt_connlabel, from Masahiro Yamada.
5) Two patch to fix ipset destination MAC matching coming from
Stephano Brivio, via Jozsef Kadlecsik.
6) Fix set rename and listing concurrency problem, from Shijie Luo.
Patch also coming via Jozsef Kadlecsik.
7) ebtables 32/64 compat missing base chain policy in rule count,
from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building the privcmd code as a loadable module on ARM, we get
a link error due to the private cache management functions:
ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined!
Move the code into a new that is always built in when Xen is enabled,
as suggested by Juergen Gross and Boris Ostrovsky.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
These include guards are broken.
Match the #if !define() and #define lines so that they work correctly.
Link: http://lkml.kernel.org/r/20190720103943.16982-1-yamada.masahiro@socionext.com
Fixes: f54d1867005c3 ("dma-buf: Rename struct fence to dma_fence")
Fixes: 2e26ca7150a4f ("tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header")
Fixes: e543002f77f46 ("qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs")
Fixes: 95f295f9fe081 ("dmaengine: tegra: add tracepoints to driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.
Guillaume Nault adds:
And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe:
fix reference counting in PPPoE proxy")), and nobody ever noticed. I
should probably have removed this ioctl entirely instead of fixing it.
Clearly, it has never been used.
Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.
All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.
This should apply to all stable kernels.
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Jason Gunthorpe:
"A few regression and bug fixes for the patches merged in the last
cycle:
- hns fixes a subtle crash from the ib core SGL rework
- hfi1 fixes various error handling, oops and protocol errors
- bnxt_re fixes a regression where nvmeof doesn't work on some
configurations
- mlx5 fixes a serious 'use after free' bug in how MR caching is
handled
- some edge case crashers in the new statistic core code
- more siw static checker fixups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification
IB/counters: Always initialize the port counter object
IB/core: Fix querying total rdma stats
IB/mlx5: Prevent concurrent MR updates during invalidation
IB/mlx5: Fix clean_mr() to work in the expected order
IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache
IB/mlx5: Use direct mkey destroy command upon UMR unreg failure
IB/mlx5: Fix unreg_umr to ignore the mkey state
RDMA/siw: Remove set but not used variables 'rv'
IB/mlx5: Replace kfree with kvfree
RDMA/bnxt_re: Honor vlan_id in GID entry comparison
IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn
IB/hfi1: Field not zero-ed when allocating TID flow memory
IB/hfi1: Unreserve a flushed OPFN request
IB/hfi1: Check for error on call to alloc_rsm_map_table
RDMA/hns: Fix sg offset non-zero issue
RDMA/siw: Fix error return code in siw_init_module()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull HMM fixes from Jason Gunthorpe:
"Fix the locking around nouveau's use of the hmm_range_* APIs. It works
correctly in the success case, but many of the the edge cases have
missing unlocks or double unlocks.
The diffstat is a bit big as Christoph did a comprehensive job to move
the obsolete API from the core header and into the driver before
fixing its flow, but the risk of regression from this code motion is
low"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
nouveau: unlock mmap_sem on all errors from nouveau_range_fault
nouveau: remove the block parameter to nouveau_range_fault
mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau
mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot}
|
|
Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive
opener") made LOOP_SET_FD ioctl acquire exclusive block device reference
while it updates loop device binding. However this can make perfectly
valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding
temporarily the exclusive bdev reference in cases like this:
for i in {a..z}{a..z}; do
dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024
mkfs.ext2 $i.image
mkdir mnt$i
done
echo "Run"
for i in {a..z}{a..z}; do
mount -o loop -t ext2 $i.image mnt$i &
done
Fix the problem by not getting full exclusive bdev reference in
LOOP_SET_FD but instead just mark the bdev as being claimed while we
update the binding information. This just blocks new exclusive openers
instead of failing them with EBUSY thus fixing the problem.
Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Gcc-9 complains for a memset across pointer boundaries, which happens as
the code tries to allocate a flexible array on the stack. Turns out we
cannot do this without relying on gcc-isms, so with this patch we'll embed
the fc_rport_priv structure into fcoe_rport, can use the normal
'container_of' outcast, and will only have to do a memset over one
structure.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
No functional change.
[mkp: typo]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull virtio/vhost fixes from Michael Tsirkin:
- Fixes in the iommu and balloon devices.
- Disable the meta-data optimization for now - I hope we can get it
fixed shortly, but there's no point in making users suffer crashes
while we are working on that.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: disable metadata prefetch optimization
iommu/virtio: Update to most recent specification
balloon: fix up comments
mm/balloon_compaction: avoid duplicate page removal
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
"Business as usual, a few fixes and new IDs:
- PC Engines APU got one fix for software dependencies to
automatically load them and another fix for mapping of key button
in the front to issue restart event.
- OLPC driver is now probed automatically based on module device
table.
- Intel PMC core driver supports Intel Ice Lake NNPI processor.
- WMI driver missed description of a new field in the structure that
has been added"
* tag 'platform-drivers-x86-v5.3-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: pcengines-apuv2: use KEY_RESTART for front button
platform/x86: intel_pmc_core: Add ICL-NNPI support to PMC Core
Platform: OLPC: add SPI MODULE_DEVICE_TABLE
platform/x86: wmi: add missing struct parameter description
platform/x86: pcengines-apuv2: Fix softdep statement
|
|
Add a header include guard just in case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty/vt fixes:
- delete the netx-serial driver as the arch has been removed, no need
to keep the serial driver for it around either.
- vt console_lock fix to resolve a reported noisy warning at runtime
Both of these have been in linux-next with no reported issues"
* tag 'tty-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Grab console_lock around con_is_bound in show_bind
tty: serial: netx: Delete driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are some small SPDX fixes for 5.3-rc2 for things that came in
during the 5.3-rc1 merge window that we previously missed.
Only three small patches here:
- two uapi patches to resolve some SPDX tags that were not correct
- fix an invalid SPDX tag in the iomap Makefile file
All have been properly reviewed on the public mailing lists"
* tag 'spdx-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
iomap: fix Invalid License ID
treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
|
|
If gpiolib is disabled, we use the inline stubs from gpio/consumer.h
instead of regular definitions of GPIO API. The stubs for 'optional'
variants of gpiod_get routines return NULL in this case as if the
relevant GPIO wasn't found. This is correct so far.
Calling other (non-gpio_get) stubs from this header triggers a warning
because the GPIO descriptor couldn't have been requested. The warning
however is unconditional (WARN_ON(1)) and is emitted even if the passed
descriptor pointer is NULL.
We don't want to force the users of 'optional' gpio_get to check the
returned pointer before calling e.g. gpiod_set_value() so let's only
WARN on non-NULL descriptors.
Cc: stable@vger.kernel.org
Reported-by: Claus H. Stovgaard <cst@phaseone.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for the fair scheduling class:
- Prevent freeing memory which is accessible by concurrent readers
- Make the RCU annotations for numa groups consistent"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Use RCU accessors consistently for ->numa_group
sched/fair: Don't free p->numa_faults with concurrent readers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of locking fixes:
- Address the fallout of the rwsem rework. Missing ACQUIREs and a
sanity check to prevent a use-after-free
- Add missing checks for unitialized mutexes when mutex debugging is
enabled.
- Remove the bogus code in the generic SMP variant of
arch_futex_atomic_op_inuser()
- Fixup the #ifdeffery in lockdep to prevent compile warnings"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: Test for initialized mutex
locking/lockdep: Clean up #ifdef checks
locking/lockdep: Hide unused 'class' variable
locking/rwsem: Add ACQUIRE comments
tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
locking/rwsem: Don't call owner_on_cpu() on read-owner
futex: Cleanup generic SMP variant of arch_futex_atomic_op_inuser()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"The nvmem changes would typically go thru Greg's tree, but they were
missed in the merge window. [ Acked by Greg ]
Summary:
- Fix mismatches in $id values and actual filenames. Now checked by
tools.
- Convert nvmem binding to DT schema
- Fix a typo in of_property_read_bool() kerneldoc
- Remove some redundant description in al-fic interrupt-controller"
* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix more $id value mismatches filenames
dt-bindings: nvmem: SID: Fix the examples node names
dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
of: Fix typo in kerneldoc
dt-bindings: interrupt-controller: al-fic: remove redundant binding
dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
|
|
"Findfrom" is not a word. Replace the function synopsis by something
that makes sense.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-07-25
This series introduces some fixes to mlx5 driver.
1) Ariel is addressing an issue with enacp flow counter race condition
2) Aya fixes ethtool speed handling
3) Edward fixes modify_cq hw bits alignment
4) Maor fixes RDMA_RX capabilities handling
5) Mark reverses unregister devices order to address an issue with LAG
6) From Tariq,
- wrong max num channels indication regression
- TLS counters naming and documentation as suggested by Jakub
- kTLS, Call WARN_ONCE on netdev mismatch
There is one patch in this series that touches nfp driver to align
TLS statistics names with latest documentation, Jakub is CC'ed.
Please pull and let me know if there is any problem.
For -stable v4.9:
('net/mlx5: Use reversed order when unregister devices')
For -stable v4.20
('net/mlx5e: Prevent encap flow counter update async to user query')
('net/mlx5: Fix modify_cq_in alignment')
For -stable v5.1
('net/mlx5e: Fix matching of speed to PRM link modes')
For -stable v5.2
('net/mlx5: Add missing RDMA_RX capabilities')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine fixes: The most important core one is the dma_max_mapping_size
fix that corrects the boot problem Gunter Roeck was having. A couple
of other driver only fixes are significant, like the cxgbi selector
support addition, the alua 2 second delay and the fdomain build fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
scsi: ibmvfc: fix WARN_ON during event pool release
scsi: fcoe: fix a typo
scsi: megaraid_sas: Make some functions static
scsi: megaraid_sas: fix panic on loading firmware crashdump
scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"
scsi: core: fix the dma_max_mapping_size call
scsi: fdomain: fix building pcmcia front-end
scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
|
|
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
so that the hardware can flip the checksum to 0xFFFF if the computed
checksum is 0 per RFC768.
However, this bit had to be set for IPv6 UDP non fragmented packets
as well per hardware requirements. Otherwise, IPv6 UDP packets
with computed checksum as 0 were transmitted by hardware and were
dropped in the network.
In addition to setting this bit for IPv6 UDP, the field is also
appropriately renamed to udp_ind as part of this change.
Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
|
|
Pull block fixes from Jens Axboe:
- Several io_uring fixes/improvements:
- Blocking fix for O_DIRECT (me)
- Latter page slowness for registered buffers (me)
- Fix poll hang under certain conditions (me)
- Defer sequence check fix for wrapped rings (Zhengyuan)
- Mismatch in async inc/dec accounting (Zhengyuan)
- Memory ordering issue that could cause stall (Zhengyuan)
- Track sequential defer in bytes, not pages (Zhengyuan)
- NVMe pull request from Christoph
- Set of hang fixes for wbt (Josef)
- Redundant error message kill for libahci (Ding)
- Remove unused blk_mq_sched_started_request() and related ops (Marcos)
- drbd dynamic alloc shash descriptor to reduce stack use (Arnd)
- blkcg ->pd_stat() non-debug print (Tejun)
- bcache memory leak fix (Wei)
- Comment fix (Akinobu)
- BFQ perf regression fix (Paolo)
* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
io_uring: ensure ->list is initialized for poll commands
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
drbd: dynamically allocate shash descriptor
block: blk-mq: Remove blk_mq_sched_started_request and started_request
bcache: fix possible memory leak in bch_cached_dev_run()
io_uring: track io length in async_list based on bytes
io_uring: don't use iov_iter_advance() for fixed buffers
block: properly handle IOCB_NOWAIT for async O_DIRECT IO
blk-mq: allow REQ_NOWAIT to return an error inline
io_uring: add a memory barrier before atomic_read
rq-qos: use a mb for got_token
rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
rq-qos: don't reset has_sleepers on spurious wakeups
rq-qos: fix missed wake-ups in rq_qos_throttle
wait: add wq_has_single_sleeper helper
block, bfq: check also in-flight I/O in dispatch plugging
block: fix sysfs module parameters directory path in comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All relatively small changes:
- a regression fix for PCM link code with CONFIG_REFCOUNT_FULL;
stumbled on a slight difference between atomic_t and refcount_t
- a couple of HD-audio stabilization patches addressing the too slow
PM resume seen on some Intel chips
- a series of ALSA compress-offload API fixes, including the
regression by the previous capture stream support
- trivial LINE6 USB-audio driver fixes, a new Conexant HD-audio chip
coverage, and a fix in AC97 bus error path"
* tag 'sound-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a conexant codec entry to let mute led work
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
ALSA: ac97: Fix double free of ac97_codec_device
ALSA: compress: Be more restrictive about when a drain is allowed
ALSA: compress: Don't allow paritial drain operations on capture streams
ALSA: compress: Prevent bypasses of set_params
ALSA: compress: Fix regression on compressed capture streams
ALSA: line6: Fix a typo
ALSA: pcm: Fix refcount_inc() on zero usage
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
ALSA: hda - Optimize resume for codecs without jack detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- revert an Intel VT-d patch that caused boot problems on some machines
- fix AMD IOMMU interrupts with x2apic enabled
- fix a potential crash when Intel VT-d domain allocation fails
- fix crash in Intel VT-d driver when accessing a domain without a
flush queue
- formatting fix for new Intel VT-d debugfs code
- fix for use-after-free bug in IOVA code
- fix for a NULL-pointer dereference in Intel VT-d driver when PCI
hotplug is used
- compilation fix for one of the previous fixes
* tag 'iommu-fixes-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Add support for X2APIC IOMMU interrupts
iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
iommu/vt-d: Print pasid table entries MSB to LSB in debugfs
iommu/iova: Remove stale cached32_node
iommu/vt-d: Check if domain->pgd was allocated
iommu/vt-d: Don't queue_iova() if there is no flush queue
iommu/vt-d: Avoid duplicated pci dma alias consideration
Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"
|
|
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.
General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.
Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.
Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch prevents a race between user invoked cached counters
query and a neighbor last usage updater.
The cached flow counter stats can be queried by calling
"mlx5_fc_query_cached" which provides the number of bytes and
packets that passed via this flow since the last time this counter
was queried.
It does so by reducting the last saved stats from the current, cached
stats and then updating the last saved stats with the cached stats.
It also provide the lastuse value for that flow.
Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the
last usage time of encapsulation flows, it calls the flow counter
query method periodically and async to user queries of the flow counter
using cls_flower.
This call is causing the driver to update the last reported bytes and
packets from the cache and therefore, future user queries of the flow
stats will return lower than expected number for bytes and packets
since the last saved stats in the driver was updated async to the last
saved stats in cls_flower.
This causes wrong stats presentation of encapsulation flows to user.
Since the neighbor usage updater only needs the lastuse stats from the
cached counter, the fix is to use a dedicated lastuse query call that
returns the lastuse value without synching between the cached stats and
the last saved stats.
Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters")
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix modify_cq_in alignment to match the device specification.
After this fix the 'cq_umem_valid' field will be in the right offset.
Cc: <stable@vger.kernel.org> # 4.19
Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits")
Signed-off-by: Edward Srouji <edwards@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
These two functions are marked as a legacy APIs to get rid of, but seem to
suit the current nouveau flow. Move it to the only user in preparation
for fixing a locking bug involving caller and callee. All comments
referring to the old API have been removed as this now is a driver private
helper.
Link: https://lore.kernel.org/r/20190724065258.16603-3-hch@lst.de
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
DIM causes to the following warnings during kernel compilation
which indicates that tx_profile and rx_profile are supposed to
be declared in *.c and not in *.h files.
In file included from ./include/rdma/ib_verbs.h:64,
from ./include/linux/mlx5/device.h:37,
from ./include/linux/mlx5/driver.h:51,
from ./include/linux/mlx5/vport.h:36,
from drivers/infiniband/hw/mlx5/ib_virt.c:34:
./include/linux/dim.h:326:1: warning: _tx_profile_ defined but not used [-Wunused-const-variable=]
326 | tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
| ^~~~~~~~~~
./include/linux/dim.h:320:1: warning: _rx_profile_ defined but not used [-Wunused-const-variable=]
320 | rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = {
| ^~~~~~~~~~
Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a description for the context parameter in the struct wmi_device_id.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The access() (and faccessat()) credentials change can cause an
unnecessary load on the RCU machinery because every access() call ends
up freeing the temporary access credential using RCU.
This isn't really noticeable on small machines, but if you have hundreds
of cores you can cause huge slowdowns due to RCU storms.
It's easy to avoid: the temporary access crededntials aren't actually
normally accessed using RCU at all, so we can avoid the whole issue by
just marking them as such.
* access-creds:
access: avoid the RCU grace period for the temporary subjective credentials
|
|
The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.
Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When going through execve(), zero out the NUMA fault statistics instead of
freeing them.
During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.
Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "WITH Linux-syscall-note" exception exists for headers exported to
user space. It is strange to add it to non-exported headers.
Commit 687a3e4d8e61 ("treewide: remove SPDX "WITH Linux-syscall-note"
from kernel-space headers") did cleanups some months ago, but it looks
like we need to do this periodically.
This patch was generated by the following script:
git grep -l -e Linux-syscall-note \
-- :*.h :^arch/*/include/uapi/asm/*.h :^include/uapi/ :^tools |
while read file
do
sed -i -e 's/(\(GPL-[^[:space:]]*\) WITH Linux-syscall-note)/\1/g' \
-e 's/ WITH Linux-syscall-note//g' $file
done
I did not commit drivers/staging/android/uapi/ion.h . This header is
not currently exported, but somebody may plan to move it to include/uapi/
when the time comes. I am not sure. Anyway, it will be better to check
the license inconsistency in drivers/staging/android/uapi/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.
The exception note is missing in some UAPI headers.
Some of them slipped in by the treewide conversion commit b24413180f56
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:
$ git show --oneline b24413180f56 -- arch/x86/include/uapi/asm/
I believe they are not intentional, and should be fixed too.
This patch was generated by the following script:
git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
while read file
do
sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
-e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
done
After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.
$ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
-- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.
The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.
Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.
But it turns out that all of this is entirely unnecessary. Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all. Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.
So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this). We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.
Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards. It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.
It is possible that we should just remove the whole RCU markings for
->cred entirely. Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.
But this is a "minimal semantic changes" change for the immediate
problem.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"Bugfixes, a pvspinlock optimization, and documentation moving"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Documentation: move Documentation/virtual to Documentation/virt
KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
KVM: X86: Dynamically allocate user_fpu
KVM: X86: Fix fpu state crash in kvm guest
Revert "kvm: x86: Use task structs fpu field for user"
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
|
|
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.
This is likely a typo and CTRL should be CTLR here as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The very first check in test_pkt_md_access is failing on s390, which
happens because loading a part of a struct __sk_buff field produces
an incorrect result.
The preprocessed code of the check is:
{
__u8 tmp = *((volatile __u8 *)&skb->len +
((sizeof(skb->len) - sizeof(__u8)) / sizeof(__u8)));
if (tmp != ((*(volatile __u32 *)&skb->len) & 0xFF)) return 2;
};
clang generates the following code for it:
0: 71 21 00 03 00 00 00 00 r2 = *(u8 *)(r1 + 3)
1: 61 31 00 00 00 00 00 00 r3 = *(u32 *)(r1 + 0)
2: 57 30 00 00 00 00 00 ff r3 &= 255
3: 5d 23 00 1d 00 00 00 00 if r2 != r3 goto +29 <LBB0_10>
Finally, verifier transforms it to:
0: (61) r2 = *(u32 *)(r1 +104)
1: (bc) w2 = w2
2: (74) w2 >>= 24
3: (bc) w2 = w2
4: (54) w2 &= 255
5: (bc) w2 = w2
The problem is that when verifier emits the code to replace a partial
load of a struct __sk_buff field (*(u8 *)(r1 + 3)) with a full load of
struct sk_buff field (*(u32 *)(r1 + 104)), an optional shift and a
bitwise AND, it assumes that the machine is little endian and
incorrectly decides to use a shift.
Adjust shift count calculation to account for endianness.
Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is
chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized
(and random) when we doing this decision, through a KVM_ARM_VCPU_INIT
ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random
idx will potentially hit a KASAN BUG [1].
In general, idx is the static property of a PMU counter that is not
expected to be modified across resets, as suggested by Julien. It
looks more reasonable if we can setup the PMU counter idx for a vcpu
in its creation time. Introduce a new function - kvm_pmu_vcpu_init()
for this basic setup. Oh, and the KASAN BUG will get fixed this way.
[1] https://www.spinics.net/lists/kvm-arm/msg36700.html
Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters")
Suggested-by: Andrew Murray <andrew.murray@arm.com>
Suggested-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|