Age | Commit message (Collapse) | Author |
|
skb_put_padto() and __skb_put_padto() callers
must check return values or risk use-after-free.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If something goes wrong (such as the SCL being stuck low) then we need
to reset the PCA chip. The issue with this is that on reset we lose all
config settings and the chip ends up in a disabled state which results
in a lock up/high CPU usage. We need to re-apply any configuration that
had previously been set and re-enable the chip.
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On x86_64, each notification results in one skbuff allocation which
consumes at least 768 bytes due to the skbuff overhead.
This patch coalesces several notifications into one single skbuff, so
each notification consumes at least ~211 bytes, that ~3.5 times less
memory consumption. As a result, this is reducing the chances to exhaust
the netlink socket receive buffer.
Rule of thumb is that each notification batch only contains netlink
messages whose report flag is the same, nfnetlink_send() requires this
to do appropriate delivery to userspace, either via unicast (echo
mode) or multicast (monitor mode).
The skbuff control buffer is used to annotate the report flag for later
handling at the new coalescing routine.
The batch skbuff notification size is NLMSG_GOODSIZE, using a larger
skbuff would allow for more socket receiver buffer savings (to amortize
the cost of the skbuff even more), however, going over that size might
break userspace applications, so let's be conservative and stick to
NLMSG_GOODSIZE.
Reported-by: Phil Sutter <phil@nwl.cc>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'xdp_state' not described in 'net_device'
Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/netdevice.h>:
../include/linux/netdevice.h:2158: warning: Function parameter or member 'proto_down_reason' not described in 'net_device'
Fixes: 829eb208e80d ("rtnetlink: add support for protodown reason")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix kernel-doc warning in <linux/device.h>:
../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device'
Fixes: 1bc138c62295 ("PM / EM: add support for other devices than CPUs in Energy Model")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/d97f40ad-3033-703a-c3cb-2843ce0f6371@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce for_each_rtd_dais_rollback macro which behaves exactly like
for_each_codec_dais_rollback and its cpu_dais equivalent but for all
dais instead.
Use newly added macro to fix soc_pcm_open error path and prevent
uninitialized dais from being cleaned-up.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Fixes: 5d9fa03e6c35 ("ASoC: soc-pcm: tidyup soc_pcm_open() order")
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200907111939.16169-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- more generic entry code ABI fallout
- debug register handling bugfixes
- fix vmalloc mappings on 32-bit kernels
- kprobes instrumentation output fix on 32-bit kernels
- fix over-eager WARN_ON_ONCE() on !SMAP hardware
- NUMA debugging fix
- fix Clang related crash on !RETPOLINE kernels
* tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Unbreak 32bit fast syscall
x86/debug: Allow a single level of #DB recursion
x86/entry: Fix AC assertion
tracing/kprobes, x86/ptrace: Fix regs argument order for i386
x86, fakenuma: Fix invalid starting node ID
x86/mm/32: Bring back vmalloc faulting on x86_32
x86/cmdline: Disable jump tables for cmdline.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
|
|
'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux
Pull misc fixes from Miguel Ojeda:
"A trivial patch for auxdisplay:
- Replace HTTP links with HTTPS ones (Alexander A. Klimov)
The usual clang-format trivial update:
- Update with the latest for_each macro list (Miguel Ojeda)
And Luc requested me to pick a sparse fix on my queue, so here it goes
along with other two trivial Compiler Attributes ones (also from Luc).
- sparse: use static inline for __chk_{user,io}_ptr() (Luc Van
Oostenryck)
- Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van
Oostenryck)
- Compiler Attributes: remove comment about sparse not supporting
__has_attribute (Luc Van Oostenryck)"
* tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
auxdisplay: Replace HTTP links with HTTPS ones
* tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
clang-format: Update with the latest for_each macro list
* tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux:
sparse: use static inline for __chk_{user,io}_ptr()
Compiler Attributes: fix comment concerning GCC 4.6
Compiler Attributes: remove comment about sparse not supporting __has_attribute
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- HSDK-4xd Dev system: perf driver updates for sampling interrupt
- HSDK* Dev System: Ethernet broken [Evgeniy Didin]
- HIGHMEM broken (2 memory banks) [Mike Rapoport]
- show_regs() rewrite once and for all
- Other minor fixes
* tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id
arc: fix memory initialization for systems with two memory banks
irqchip/eznps: Fix build error for !ARC700 builds
ARC: show_regs: fix r12 printing and simplify
ARC: HSDK: wireup perf irq
ARC: perf: don't bail setup if pct irq missing in device-tree
ARC: pgalloc.h: delete a duplicated word + other fixes
|
|
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: MAINTAINERS, ipc, fork,
checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration,
hugetlb)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
mm/khugepaged.c: fix khugepaged's request size in collapse_file
mm/hugetlb: fix a race between hugetlb sysctl handlers
mm/hugetlb: try preferred node first when alloc gigantic page from cma
mm/migrate: preserve soft dirty in remove_migration_pte()
mm/migrate: remove unnecessary is_zone_device_page() check
mm/rmap: fixup copying of soft dirty and uffd ptes
mm/migrate: fixup setting UFFD_WP flag
mm: madvise: fix vma user-after-free
checkpatch: fix the usage of capture group ( ... )
fork: adjust sysctl_max_threads definition to match prototype
ipc: adjust proc_ipc_sem_dointvec definition to match prototype
mm: track page table modifications in __apply_to_page_range()
MAINTAINERS: IA64: mark Status as Odd Fixes only
MAINTAINERS: add LLVM maintainers
MAINTAINERS: update Cavium/Marvell entries
mm: slub: fix conversion of freelist_corrupted()
mm: memcg: fix memcg reclaim soft lockup
memcg: fix use-after-free in uncharge_batch
|
|
Otherwise gcc generates warnings if the expression is complicated.
Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull libata fixes from Jens Axboe:
- improve Sandisks ATA_HORKAGE on NCQ (Tejun)
- link printk cleanup (Xu)
* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
ata: ahci: use ata_link_info() instead of ata_link_printk()
|
|
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
|
|
Pull drm fixes from Dave Airlie:
"Not much going on this week, nouveau has a display hw bug workaround,
amdgpu has some PM fixes and CIK regression fixes, one single radeon
PLL fix, and a couple of i915 display fixes.
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
i915:
- Clang build warning fix
- HDCP fixes
nouveau:
- display fixes"
* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
drm/nouveau/kms/nv50-: add some whitespace before debug message
drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
drm/radeon: Prefer lower feedback dividers
drm/amdgpu: Fix bug in reporting voltage for CIK
drm/amdgpu: Specify get_argument function for ci_smu_funcs
drm/amd/pm: enable MP0 DPM for sienna_cichlid
drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
drm/amd/pm: fix is_dpm_running() run error on 32bit system
drm/i915: Clear the repeater bit on HDCP disable
drm/i915: Fix sha_text population code
drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state
|
|
Merge emailed patches from Peter Xu:
"This is a small series that I picked up from Linus's suggestion to
simplify cow handling (and also make it more strict) by checking
against page refcounts rather than mapcounts.
This makes uffd-wp work again (verified by running upmapsort)"
Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:
8 files changed, 29 insertions(+), 120 deletions(-)
The reason for the bad timing is that it turns out that commit
17839856fd58 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.
And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.
Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/
* emailed patches from Peter Xu <peterx@redhat.com>:
mm: Add PGREUSE counter
mm/gup: Remove enfornced COW mechanism
mm/ksm: Remove reuse_ksm_page()
mm: do_wp_page() simplification
|
|
This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 4c0d77828d4f ("dyndbg: export ddebug_exec_queries") had a few
problems:
- broken non DYNAMIC_DEBUG_CORE configs, sparse warning
- the exported function modifies query string, breaks on RO strings.
- func name follows internal convention, shouldn't be exposed as is.
1st is fixed in header with ifdefd function prototype or stub defn.
Also remove an obsolete HAVE-symbol ifdef-comment, and add others.
Fix others by wrapping existing internal function with a new one,
named in accordance with module-prefix naming convention, before
export hits v5.9.0. In new function, copy query string to a local
buffer, so users can pass hard-coded/RO queries, and internal function
can be used unchanged.
Fixes: 4c0d77828d4f ("dyndbg: export ddebug_exec_queries")
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200831182210.850852-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Andy reported that the syscall treacing for 32bit fast syscall fails:
# ./tools/testing/selftests/x86/ptrace_syscall_32
...
[RUN] SYSEMU
[FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732)
...
[RUN] SYSCALL
[FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732)
The eason is that the conversion to generic entry code moved the retrieval
of the sixth argument (EBP) after the point where the syscall entry work
runs, i.e. ptrace, seccomp, audit...
Unbreak it by providing a split up version of syscall_enter_from_user_mode().
- syscall_enter_from_user_mode_prepare() establishes state and enables
interrupts
- syscall_enter_from_user_mode_work() runs the entry work
Replace the call to syscall_enter_from_user_mode() in the 32bit fast
syscall C-entry with the split functions and stick the EBP retrieval
between them.
Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de
|
|
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also
being used by non DAX devices.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to protect against the header being included multiple times
on the same compilation unit.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull networking fixes from David Miller:
1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
Kivilinna.
2) Fix loss of RTT samples in rxrpc, from David Howells.
3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.
4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.
5) We disable BH for too lokng in sctp_get_port_local(), add a
cond_resched() here as well, from Xin Long.
6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.
7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
Yonghong Song.
8) Missing of_node_put() in mt7530 DSA driver, from Sumera
Priyadarsini.
9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.
10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.
11) Memory leak in rxkad_verify_response, from Dinghao Liu.
12) In tipc, don't use smp_processor_id() in preemptible context. From
Tuong Lien.
13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.
14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.
15) Fix ABI mismatch between driver and firmware in nfp, from Louis
Peens.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
net/smc: fix sock refcounting in case of termination
net/smc: reset sndbuf_desc if freed
net/smc: set rx_off for SMCR explicitly
net/smc: fix toleration of fake add_link messages
tg3: Fix soft lockup when tg3_reset_task() fails.
doc: net: dsa: Fix typo in config code sample
net: dp83867: Fix WoL SecureOn password
nfp: flower: fix ABI mismatch between driver and firmware
tipc: fix shutdown() of connectionless socket
ipv6: Fix sysctl max for fib_multipath_hash_policy
drivers/net/wan/hdlc: Change the default of hard_header_len to 0
net: gemini: Fix another missing clk_disable_unprepare() in probe
net: bcmgenet: fix mask check in bcmgenet_validate_flow()
amd-xgbe: Add support for new port mode
net: usb: dm9601: Add USB ID of Keenetic Plus DSL
vhost: fix typo in error message
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
pktgen: fix error message with wrong function name
net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
cxgb4: fix thermal zone device registration
...
|
|
Block layer usually doesn't support or allow zero-length bvec. Since
commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement
iterate_bvec()"), iterate_bvec() switches to bvec iterator. However,
Al mentioned that 'Zero-length segments are not disallowed' in iov_iter.
Fixes for_each_bvec() so that it can move on after seeing one zero
length bvec.
Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()")
Reported-by: syzbot <syzbot+61acc40a49a3e46e25ea@syzkaller.appspotmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- data sanitization and validtion fixes for report descriptor parser
from Marc Zyngier
- memory leak fix for hid-elan driver from Dinghao Liu
- two device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: Sanitize event code and type when mapping input
HID: core: Correctly handle ReportSize being zero
HID: elan: Fix memleak in elan_input_configured
HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
|
|
All three generations of Sandisk SSDs lock up hard intermittently.
Experiments showed that disabling NCQ lowered the failure rate significantly
and the kernel has been disabling NCQ for some models of SD7's and 8's,
which is obviously undesirable.
Karthik worked with Sandisk to root cause the hard lockups to trim commands
larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which
limits max trim size to 128M and applies it to all three generations of
Sandisk SSDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Karthik Shivaram <karthikgs@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch fixes a few bugs:
1- We weren't taking into account sha_leftovers when adding multiple
ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with
the beginning of ksv[j]
2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was
being placed on the wrong half of sha_text, overlapping the leftover
ksv value
3- In the sha_leftovers == 2 case, we need to manually terminate the
byte stream with 0x80 since the hardware doesn't have enough room to
add it after writing M0
The upside is that all of the HDCP supported HDMI repeaters I could
find on Amazon just strip HDCP anyways, so it turns out to be _really_
hard to hit any of these cases without an MST hub, which is not (yet)
supported. Oh, and the sha_leftovers == 1 case works perfectly!
Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.17+
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run
(cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler:
- Make is_idle_task() __always_inline to prevent the compiler from
putting it out of line into the wrong section because it's used
inside noinstr sections"
* tag 'sched-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Use __always_inline on is_idle_task()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes for Xen: one needed for ongoing work to support virtio with
Xen, and one for a corner case in IRQ handling with Xen"
* tag 'for-linus-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Add misuse warning to virt_to_gfn
xen/xenbus: Fix granting of vmalloc'd memory
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
|
|
__chk_user_ptr() & __chk_io_ptr() are dummy extern functions which
only exist to enforce the typechecking of __user or __iomem pointers
in macros when using sparse.
This typechecking is done by inserting a call to these functions.
But the presence of these calls can inhibit some simplifications
and so influence the result of sparse's analysis of context/locking.
Fix this by changing these calls into static inline calls with
an empty body.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the recently added Tegra194 cpufreq driver and the handling
of devices using runtime PM during system-wide suspend, improve the
intel_pstate driver documentation and clean up the cpufreq core.
Specifics:
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices with
pending runtime-resume requests during system-wide suspend to avoid
spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar)"
* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
PM: sleep: core: Fix the handling of pending runtime resume requests
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
* pm-cpufreq:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
|
|
I keep getting sparse warnings in crypto such as:
CHECK drivers/crypto/ccree/cc_hash.c
drivers/crypto/ccree/cc_hash.c:49:9: warning: cast truncates bits from constant value (47b5481dbefa4fa4 becomes befa4fa4)
drivers/crypto/ccree/cc_hash.c:49:26: warning: cast truncates bits from constant value (db0c2e0d64f98fa7 becomes 64f98fa7)
[.. many more ..]
This patch removes the warning by adding a mask to keep sparse
happy.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Frontend callback reports EAGAIN to nfnetlink to retry a command, this
is used to signal that module autoloading is required. Unfortunately,
nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets
full, so it enters a busy-loop.
This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and
to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast()
since this is always MSG_DONTWAIT in the existing code which is exactly
what nlmsg_unicast() passes to netlink_unicast() as parameter.
Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback fixes from Jan Kara:
"Fixes for writeback code occasionally skipping writeback of some
inodes or livelocking sync(2)"
* tag 'writeback_for_v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: Drop I_DIRTY_TIME_EXPIRE
writeback: Fix sync livelock due to b_dirty_time processing
writeback: Avoid skipping inode writeback
writeback: Protect inode->i_io_list with inode->i_lock
|
|
Pull ceph fixes from Ilya Dryomov:
"We have an inode number handling change, prompted by s390x which is a
64-bit architecture with a 32-bit ino_t, a patch to disallow leases to
avoid potential data integrity issues when CephFS is re-exported via
NFS or CIFS and a fix for the bulk of W=1 compilation warnings"
* tag 'ceph-for-5.9-rc3' of git://github.com/ceph/ceph-client:
ceph: don't allow setlease on cephfs
ceph: fix inode number handling on arches with 32-bit ino_t
libceph: add __maybe_unused to DEFINE_CEPH_FEATURE
|
|
Pull drm fixes from Dave Airlie:
"As expected a bit of an rc3 uptick, amdgpu and msm are the main ones,
one msm patch was from the merge window, but had dependencies and we
dropped it until the other tree had landed. Otherwise it's a couple of
fixes for core, and etnaviv, and single i915, exynos, omap fixes.
I'm still tracking the Sandybridge gpu relocations issue, if we don't
see much movement I might just queue up the reverts. I'll talk to
Daniel next week once he's back from holidays.
core:
- Take modeset bkl for legacy drivers
dp_mst:
- Allow null crtc in dp_mst
i915:
- Fix command parser desc matching with masks
amdgpu:
- Misc display fixes
- Backlight fixes
- MPO fix for DCN1
- Fixes for Sienna Cichlid
- Fixes for Navy Flounder
- Vega SW CTF fixes
- SMU fix for Raven
- Fix a possible overflow in INFO ioctl
- Gfx10 clockgating fix
msm:
- opp/bw scaling patch followup
- frequency restoring fux
- vblank in atomic commit fix
- dpu modesetting fixes
- fencing fix
etnaviv:
- scheduler interaction fix
- gpu init regression fix
exynos:
- Just drop __iommu annotation to fix sparse warning
omap:
- locking state fix"
* tag 'drm-fixes-2020-08-28' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/amd/display: Fix memleak in amdgpu_dm_mode_config_init
drm/amdgpu: disable runtime pm for navy_flounder
drm/amd/display: Retry AUX write when fail occurs
drm/amdgpu: Fix buffer overflow in INFO ioctl
drm/amd/powerplay: Fix hardmins not being sent to SMU for RV
drm/amdgpu: use MODE1 reset for navy_flounder by default
drm/amd/pm: correct the thermal alert temperature limit settings
drm/amdgpu: add asd fw check before loading asd
drm/amd/display: Keep current gain when ABM disable immediately
drm/amd/display: Fix passive dongle mistaken as active dongle in EDID emulation
drm/amd/display: Revert HDCP disable sequence change
drm/amd/display: Send DISPLAY_OFF after power down on boot
drm/amdgpu/gfx10: refine mgcg setting
drm/amd/pm: correct Vega20 swctf limit setting
drm/amd/pm: correct Vega12 swctf limit setting
drm/amd/pm: correct Vega10 swctf limit setting
drm/amd/pm: set VCN pg per instances
drm/amd/pm: enable run_btc callback for sienna_cichlid
drivers: gpu: amd: Initialize amdgpu_dm_backlight_caps object to 0 in amdgpu_dm_update_backlight_caps
drm/amd/display: Reject overlay plane configurations in multi-display scenarios
...
|
|
commit 25612477d20b52 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
added snd_soc_dai_link_set_capabilities().
But it is using snd_soc_find_dai() (A) which is required client_mutex (B).
And client_mutex is soc-core.c local.
struct snd_soc_dai *snd_soc_find_dai(xxx)
{
...
(B) lockdep_assert_held(&client_mutex);
...
}
void snd_soc_dai_link_set_capabilities(xxx)
{
...
for_each_pcm_streams(direction) {
...
for_each_link_cpus(dai_link, i, cpu) {
(A) dai = snd_soc_find_dai(cpu);
...
}
...
for_each_link_codecs(dai_link, i, codec) {
(A) dai = snd_soc_find_dai(codec);
...
}
}
...
}
Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP.
WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100
CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328
Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : snd_soc_find_dai+0xf8/0x100
lr : snd_soc_find_dai+0xf4/0x100
...
Call trace:
snd_soc_find_dai+0xf8/0x100
snd_soc_dai_link_set_capabilities+0xa0/0x16c
graph_dai_link_of_dpcm+0x390/0x3c0
graph_for_each_link+0x134/0x200
graph_probe+0x144/0x230
platform_drv_probe+0x5c/0xb0
really_probe+0xe4/0x430
driver_probe_device+0x60/0xf4
snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with
mutex lock, and (Y) Card driver without mutex lock.
This snd_soc_dai_link_set_capabilities() is for Card driver,
this means called without mutex.
This patch adds snd_soc_find_dai_with_mutex() to solve it.
Fixes: 25612477d20b52 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.
The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
- copy AUX_IENABLE from arch/arc header
- move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc, afs: Fix probing issues
Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in
rxrpc and thence the Volume Location server probing in afs:
(1) Move the serial number of a received ACK into a local variable to
simplify the next patch.
(2) Fix the loss of RTT samples due to extra interposed ACKs causing
baseline information to be discarded too early. This is a particular
problem for afs when it sends a single very short call to probe a
server it hasn't talked to recently.
(3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen
any valid samples or not.
(4) Remove a field that's set/woken, but never read/waited on.
(5) Expose the RTT and other probe information through procfs to make
debugging of this stuff easier.
(6) Fix VL rotation in afs to only use summary information from VL probing
and not the probe running state (which gets clobbered when next a
probe is issued).
(7) Fix VL rotation to actually return the error aggregated from the probe
errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix some comments, including wrong function name, duplicated word and so
on.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The relation can't be invalid here, so if it turns out to be invalid,
just WARN_ON_ONCE() and return 0.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
GCC 4.6 is not supported anymore, so remove a reference to it,
leaving just the part about version prior GCC 5.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Sparse supports __has_attribute() since 2018-08-31, so the comment
is not true anymore but more importantly is rather confusing.
So remove it.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|