summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-05-02net: sched: add helpers to handle extended actionsJiri Pirko
Jump is now the only one using value action opcode. This is going to change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP. This also fixes the TC_ACT_JUMP check, which is incorrectly done as a bit check, not a value check. Fixes: e0ee84ded796 ("net sched actions: Complete the JUMPX opcode") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02qed*: Fix issues in the ptp filter config implementation.sudarsana.kalluru@cavium.com
PTP hardware filter configuration performed by the driver for a given user requested config is not correct for some of the PTP modes. Following changes are needed for PTP config-filter implementation. 1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables TimeSync/"V1 frame format support"/"V2 frame format support" on the TX side. Set the associated bits based on the user request. 2. ptp4l application fails to operate in Peer Delay mode. Following changes are needed to fix this, a. Driver should enable (set to 0) DA #1-related bits for IPv4, IPv6 and MAC destination addresses in these registers: NIG_REG_TX_LLH_PTP_RULE_MASK NIG_REG_LLH_PTP_RULE_MASK b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should be set to 0x0 in all modes. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01rhashtable: compact struct rhashtable_paramsFlorian Westphal
By using smaller datatypes this (rather large) struct shrinks considerably (80 -> 48 bytes on x86_64). As this is embedded in other structs, this also rerduces size of several others, e.g. cls_fl_head or nft_hash. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01Merge tag 'mlx5-updates-2017-04-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-updates-2017-04-30 Or says: ================ mlx5 neigh update This series (whose code name is 'neigh update') from Hadar, enhances the mlx5 TC IP tunnel offloads to deal with changes to tunnel destination neighbours used in offloaded flows which involved encapsulation. In order to keep track on the validity state of such neighbours, we register a netevent notifier callback and act on NEIGH_UPDATE events: if a neighbour becomes valid, offload the related flows to HW (the other way around when neigh becomes invalid) and similarly when a neigh mac addresses changes. Since this traffic is offloaded from the host OS, the neighbour for the IP tunnel destination can mistakenly become STALE and deleted by the kernel since its 'used' value wasn't changed. To address that, we proactively update the neighbour 'used' value every DELAY_PROBE_TIME seconds, using time stamps generated by the existing driver code for HW flow counters. We use the DELAY_PROBE_TIME_UPDATE event to adjust the frequency of the updates. Prior to the core of the series, there's a patch from Saeed that introduces an extendable vport representor implementation scheme. It provides a separation between the eswitch to the netdev related aspects of the representors. We would like to thank Ido Schimmel and Ilya Lesokhin for their coaching && advice through the long design and review cycles while we struggled to understand and (hopefully correctly) implement the locking around the different driver flows(..) . - Or. ================= Misc Updates: From Tariq: Some small performance and trivial code optimization for mlx5 netdev driver - Optimize poll ICOSQ completion queue - Use prefetchw when a write is to follow - Use u8 as ownership type in mlx5e_get_cqe() From Eran: - Disable LRO by default on specific setups From Eli: - Small cleanup for E-Switch to avoid redundant allocation Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01qed: output the DPM status and WID countRam Amrani
Output to the RDMA driver whether DPM mode is enabled or disabled in the HW and if so what is the number of WIDs it supports Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for your net-next tree. A large bunch of code cleanups, simplify the conntrack extension codebase, get rid of the fake conntrack object, speed up netns by selective synchronize_net() calls. More specifically, they are: 1) Check for ct->status bit instead of using nfct_nat() from IPVS and Netfilter codebase, patch from Florian Westphal. 2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao. 3) Simplify FTP IPVS helper module registration path, from Arushi Singhal. 4) Introduce nft_is_base_chain() helper function. 5) Enforce expectation limit from userspace conntrack helper, from Gao Feng. 6) Add nf_ct_remove_expect() helper function, from Gao Feng. 7) NAT mangle helper function return boolean, from Gao Feng. 8) ctnetlink_alloc_expect() should only work for conntrack with helpers, from Gao Feng. 9) Add nfnl_msg_type() helper function to nfnetlink to build the netlink message type. 10) Get rid of unnecessary cast on void, from simran singhal. 11) Use seq_puts()/seq_putc() instead of seq_printf() where possible, also from simran singhal. 12) Use list_prev_entry() from nf_tables, from simran signhal. 13) Remove unnecessary & on pointer function in the Netfilter and IPVS code. 14) Remove obsolete comment on set of rules per CPU in ip6_tables, no longer true. From Arushi Singhal. 15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng. 16) Remove unnecessary nested rcu_read_lock() in __nf_nat_decode_session(). Code running from hooks are already guaranteed to run under RCU read side. 17) Remove deadcode in nf_tables_getobj(), from Aaron Conole. 18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(), also from Aaron. 19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole. 20) Don't propagate NF_DROP error to userspace via ctnetlink in __nf_nat_alloc_null_binding() function, from Gao Feng. 21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks, from Gao Feng. 22) Kill the fake untracked conntrack objects, use ctinfo instead to annotate a conntrack object is untracked, from Florian Westphal. 23) Remove nf_ct_is_untracked(), now obsolete since we have no conntrack template anymore, from Florian. 24) Add event mask support to nft_ct, also from Florian. 25) Move nf_conn_help structure to include/net/netfilter/nf_conntrack_helper.h. 26) Add a fixed 32 bytes scratchpad area for conntrack helpers. Thus, we don't deal with variable conntrack extensions anymore. Make sure userspace conntrack helper doesn't go over that size. Remove variable size ct extension infrastructure now this code got no more clients. From Florian Westphal. 27) Restore offset and length of nf_ct_ext structure to 8 bytes now that wraparound is not possible any longer, also from Florian. 28) Allow to get rid of unassured flows under stress in conntrack, this applies to DCCP, SCTP and TCP protocols, from Florian. 29) Shrink size of nf_conntrack_ecache structure, from Florian. 30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker, from Gao Feng. 31) Register SYNPROXY hooks on demand, from Florian Westphal. 32) Use pernet hook whenever possible, instead of global hook registration, from Florian Westphal. 33) Pass hook structure to ebt_register_table() to consolidate some infrastructure code, from Florian Westphal. 34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the SYNPROXY code, to make sure device stats are not fooled, patch from Gao Feng. 35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we don't need anymore if we just select a fixed size instead of expensive runtime time calculation of this. From Florian. 36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(), from Florian. 37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from Florian. 38) Attach NAT extension on-demand from masquerade and pptp helper path, from Florian. 39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole. 40) Speed up netns by selective calls of synchronize_net(), from Florian Westphal. 41) Silence stack size warning gcc in 32-bit arch in snmp helper, from Florian. 42) Inconditionally call nf_ct_ext_destroy(), even if we have no extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01xdp: propagate extended ack to XDP setupJakub Kicinski
Drivers usually have a number of restrictions for running XDP - most common being buffer sizes, LRO and number of rings. Even though some drivers try to be helpful and print error messages experience shows that users don't often consult kernel logs on netlink errors. Try to use the new extended ack mechanism to carry the message back to user space. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01netlink: add NULL-friendly helper for setting extended ACK messageJakub Kicinski
As we propagate extended ack reporting throughout various paths in the kernel it may be that the same function is called with the extended ack parameter passed as NULL. One place where that happens is in drivers which have a centralized reconfiguration function called both from ndos and from ethtool_ops. Add a new helper for setting the error message in such conditions. Existing helper is left as is to encourage propagating the ext act fully wherever possible. It also makes it clear in the code which messages may be lost due to ext ack being NULL. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01netfilter: nf_ct_ext: invoke destroy even when ext is not attachedLiping Zhang
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table, then remove it from the nat_bysource_table via nat_extend->destroy. But now, the nat extension is attached on demand, so if the nat extension is not attached, we will not be notified when the ct is destroyed, i.e. we may fail to remove ct from the nat_bysource_table. So just keep it simple, even if the extension is not attached, we will still invoke the related ext->destroy. And this will also preserve the flexibility for the future extension. Fixes: 9a08ecfe74d7 ("netfilter: don't attach a nat extension by default") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-01Merge tag 'ipvs3-for-v4.12' of ↵Pablo Neira Ayuso
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next Simon Horman says: ==================== Third Round of IPVS Updates for v4.12 please consider these enhancements to IPVS for v4.12. If it is too late for v4.12 then please consider them for v4.13. * Remove unused function * Correct comparison of unsigned value ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-05-01netfilter: nf_queue: only call synchronize_net twice if nf_queue is activeFlorian Westphal
nf_unregister_net_hook(s) can avoid a second call to synchronize_net, provided there is no nfqueue active in that net namespace (which is the common case). This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally this gets called during netns cleanup so no packets should be queued. For the rare case of base chain being unregistered or module removal while nfqueue is in use the extra hiccup due to the packet drops isn't a big deal. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-30bpf: Fix inaccurate helper function descriptionChenbo Feng
The description inside uapi/linux/bpf.h about bpf_get_socket_uid helper function is no longer valid. It returns overflowuid rather than 0 when failed. Signed-off-by: Chenbo Feng <fengc@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-30net/mlx5e: Update neighbour 'used' state using HW flow rules countersHadar Hen Zion
When IP tunnel encapsulation rules are offloaded, the kernel can't see the traffic of the offloaded flow. The neighbour for the IP tunnel destination of the offloaded flow can mistakenly become STALE and deleted by the kernel since its 'used' value wasn't changed. To make sure that a neighbour which is used by the HW won't become STALE, we proactively update the neighbour 'used' value every DELAY_PROBE_TIME period, when packets were matched and counted by the HW for one of the tunnel encap flows related to this neighbour. The periodic task that updates the used neighbours is scheduled when a tunnel encap rule is successfully offloaded into HW and keeps re-scheduling itself as long as the representor's neighbours list isn't empty. Add, remove, lookup and status change operations done over the representor's neighbours list or the neighbour hash entry encaps list are all serialized by RTNL lock. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-04-28Merge tag 'mac80211-next-for-davem-2017-04-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of patches for -next: * API support for concurrent scheduled scan requests * API changes for roaming reporting * BSS max idle support in mac80211 * API changes for TX status reporting in mac80211 * API changes for RX rate reporting in mac80211 * rewrite monitor logic to prepare for BPF filters * bugfix for rare devices without 2.4 GHz support * a bugfix for recent DFS changes * some further cleanups The API changes are actually at a nice time, since it's typically quiet just before the merge window, and trees can be synchronized easily during it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: Add support for BSS max idle period elementAvraham Stern
Parse the BSS max idle period element and set the BSS configuration accordingly so the driver can use this information to configure the max idle period and to use protected management frames for keep alive when required. The BSS max idle period element is defined in IEEE802.11-2016, section 9.4.2.79 Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: unify cfg80211_roamed() and cfg80211_roamed_bss()Avraham Stern
cfg80211_roamed() and cfg80211_roamed_bss() take the same arguments except that cfg80211_roamed() requires the BSSID and cfg80211_roamed_bss() requires the bss entry. Unify the two functions by using a struct for driver initiated roaming information so that either the BSSID or the bss entry can be passed as an argument to the unified function. Signed-off-by: Avraham Stern <avraham.stern@intel.com> [modified the ath6k, brcm80211, rndis and wlan-ng drivers accordingly] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> [modify brcmfmac to remove the useless cast, spotted by Arend] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28ipvs: remove unused function ip_vs_set_state_timeoutAaron Conole
There are no in-tree callers of this function and it isn't exported. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Simon Horman <horms@verge.net.au>
2017-04-28mac80211: add ieee80211_tx_status_extFelix Fietkau
This allows the driver to pass in struct ieee80211_tx_status directly. Make ieee80211_tx_status_noskb a wrapper around it. As with ieee80211_tx_status_noskb, there is no _ni variant of this call, because it probably won't be needed. Even if the driver won't provide any extra status info other than what's in struct ieee80211_tx_info already, it can optimize status reporting this way by passing in the station pointer. Signed-off-by: Felix Fietkau <nbd@nbd.name> [use C99 initializers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: make rate control tx status API more extensibleFelix Fietkau
Rename .tx_status_noskb to .tx_status_ext and pass a new on-stack struct ieee80211_tx_status instead of struct ieee80211_tx_info. This struct can be used to pass extra information, e.g. for dynamic tx power control Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: rename ieee80211_rx_status::vht_nss to just nssJohannes Berg
This field will need to be used again for HE, so rename it now. Again, mostly done with this spatch: @@ expression status; @@ -status->vht_nss +status->nss @@ expression status; @@ -status.vht_nss +status.nss Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27bridge: add per-port broadcast flood flagMike Manning
Support for l2 multicast flood control was added in commit b6cb5ac8331b ("net: bridge: add per-port multicast flood flag"). It allows broadcast as it was introduced specifically for unknown multicast flood control. But as broadcast is a special case of multicast, this may also need to be disabled. For this purpose, introduce a flag to disable the flooding of received l2 broadcasts. This approach is backwards compatible and provides flexibility in filtering for the desired packet types. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: update comment for netif_dormant() functionZhang Shengju
This patch updates the comment for netif_dormant() function to reflect the intended usage. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27rhashtable: Cap total number of entries to 2^31Herbert Xu
When max_size is not set or if it set to a sufficiently large value, the nelems counter can overflow. This would cause havoc with the automatic shrinking as it would then attempt to fit a huge number of entries into a tiny hash table. This patch fixes this by adding max_elems to struct rhashtable to cap the number of elements. This is set to 2^31 as nelems is not a precise count. This is sufficiently smaller than UINT_MAX that it should be safe. When max_size is set max_elems will be lowered to at most twice max_size as is the status quo. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ieee80211: fix kernel-doc parsing errorsJohannes Berg
Some of the enum definitions are unnamed but there's still an attempt at documenting them - that doesn't work. Name them to make that work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add FT-802.1X AKM suite selectorLuca Coelho
Add the definition for FT-8021.1X AKM selector as defined in IEEE Std 802.11-2016, table 9-133. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add SUITE_B AKM selectorsLuca Coelho
Add the definitions for SUITE_B and SUITE_B_192 AKM selectors as defined in IEEE802.11REVmc_D5.0, table 9-132. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: add support for BSSIDs in scheduled scan matchsetsArend Van Spriel
This patch allows for the scheduled scan request to specify matchsets for specific BSSIDs. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [docs, netlink policy fix] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: simplify netlink socket owner interface deletionJohannes Berg
There's no need to allocate a portid structure and then, for each of those, walk the interfaces - we can just add a flag to each interface and walk those directly. Due to padding in the struct, we can even do it without any memory cost, and it even simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26tcp: switch rcv_rtt_est and rcvq_space to high resolution timestampsEric Dumazet
Some devices or distributions use HZ=100 or HZ=250 TCP receive buffer autotuning has poor behavior caused by this choice. Since autotuning happens after 4 ms or 10 ms, short distance flows get their receive buffer tuned to a very high value, but after an initial period where it was frozen to (too small) initial value. With tp->tcp_mstamp introduction, we can switch to high resolution timestamps almost for free (at the expense of 8 additional bytes per TCP structure) Note that some TCP stacks use usec TCP timestamps where this patch makes even more sense : Many TCP flows have < 500 usec RTT. Hopefully this finer TS option can be standardized soon. Tested: HZ=100 kernel ./netperf -H lpaa24 -t TCP_RR -l 1000 -- -r 10000,10000 & Peer without patch : lpaa24:~# ss -tmi dst lpaa23 ... skmem:(r0,rb8388608,...) rcv_rtt:10 rcv_space:3210000 minrtt:0.017 Peer with the patch : lpaa23:~# ss -tmi dst lpaa24 ... skmem:(r0,rb428800,...) rcv_rtt:0.069 rcv_space:30000 minrtt:0.017 We can see saner RCVBUF, and more precise rcv_rtt information. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_advance()Eric Dumazet
No longer needed, since tp->tcp_mstamp holds the information. This is needed to remove sack_state.ack_time in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rate_gen()Eric Dumazet
No longer needed, since tp->tcp_mstamp holds the information. This is needed to remove sack_state.ack_time in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_mark_lost()Eric Dumazet
This is no longer used, since tcp_rack_detect_loss() takes the timestamp from tp->tcp_mstamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: add tp->tcp_mstamp fieldEric Dumazet
We want to use precise timestamps in TCP stack, but we do not want to call possibly expensive kernel time services too often. tp->tcp_mstamp is guaranteed to be updated once per incoming packet. We will use it in the following patches, removing specific skb_mstamp_get() calls, and removing ack_time from struct tcp_sacktag_state. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26rhashtable: remove insecure_max_entries paramFlorian Westphal
no users in the tree, insecure_max_entries is always set to ht->p.max_size * 2 in rhtashtable_init(). Replace only spot that uses it with a ht->p.max_size check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov
The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26netfilter: don't attach a nat extension by defaultFlorian Westphal
nowadays the NAT extension only stores the interface index (used to purge connections that got masqueraded when interface goes down) and pptp nat information. Previous patches moved nf_ct_nat_ext_add to those places that need it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-26netfilter: conntrack: mark extension structs as constFlorian Westphal
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-26netfilter: conntrack: remove prealloc supportFlorian Westphal
It was used by the nat extension, but since commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") its only needed for connections that use MASQUERADE target or a nat helper. Also it seems a lot easier to preallocate a fixed size instead. With default settings, conntrack first adds ecache extension (sysctl defaults to 1), so we get 40(ct extension header) + 24 (ecache) == 64 byte on x86_64 for initial allocation. Followup patches can constify the extension structs and avoid the initial zeroing of the entire extension area. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-26ebtables: remove nf_hook_register usageFlorian Westphal
Similar to ip_register_table, pass nf_hook_ops to ebt_register_table(). This allows to handle hook registration also via pernet_ops and allows us to avoid use of legacy register_hook api. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-26netfilter: synproxy: only register hooks when neededFlorian Westphal
Defer registration of the synproxy hooks until the first SYNPROXY rule is added. Also means we only register hooks in namespaces that need it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-25net: move xdp_prog field in RX cache linesEric Dumazet
(struct net_device, xdp_prog) field should be moved in RX cache lines, reducing latencies when a single packet is received on idle host, since netif_elide_gro() needs it. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: Generic XDPDavid S. Miller
This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25bpf: map_get_next_key to return first key on NULLTeng Qin
When iterating through a map, we need to find a key that does not exist in the map so map_get_next_key will give us the first key of the map. This often requires a lot of guessing in production systems. This patch makes map_get_next_key return the first key when the key pointer in the parameter is NULL. Signed-off-by: Teng Qin <qinteng@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed/qede: Add UDP ports in bulletin boardChopra, Manish
This patch adds support for UDP ports in bulletin board to notify UDP ports change to the VFs Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 21:36:37 +0000