summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-09-06usb: ulpi: make ops struct constantTal Shorer
None of the core ulpi functions perform any changes to the operations struct, and logically as a struct that contains function pointers there's no reason it shouldn't be constant. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: remove "dev" field from struct ulpi_opsTal Shorer
Operations now use ulpi->dev.parent directly instead of via the ulpi_ops struct, making this field unused. Remove it. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: rename operations {read|write}_dev to simply {read|write}Tal Shorer
With the removal of the old {read|write} operations, we can now safely rename the new api operations {read|write}_dev to use the shorter and clearer names {read|write}, respectively. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: remove calls to old api callbacksTal Shorer
Now that all users use the new api callbacks, remove the old api callbacks and force new interface drivers to use the new api. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06usb: ulpi: add new api functions, {read|write}_dev()Tal Shorer
Add these two new api callbacks to struct ulpi_ops. These are different than read, write in that they pass the parent device directly instead of via the ops argument. They are intended to replace the old api functions. If the new api callbacks are missing, revert to calling the old ones as before. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tal Shorer <tal.shorer@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-31usb: gadget: add a new quirk to avoid skb_reserve in u_ether.cYoshihiro Shimoda
Some platforms (e.g. USB-DMAC on R-Car SoCs) has memory alignment restriction. If memory alignment is not match, the usb peripheral driver decides not to use the DMA controller. Then, the performance is not good. In the case of u_ether.c, since it calls skb_reserve() in rx_submit(), it is possible to cause memory alignment mismatch. So, this patch adds a new quirk "quirk_avoids_skb_reserve" to avoid skb_reserve() calling in u_ether.c to improve performance. A peripheral driver will set this flag and network gadget drivers (e.g. f_ncm.c) will reference the flag via gadget_avoids_skb_reserve(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_fs: handle control requests in config 0Felix Hädicke
Introduces a new FunctionFS descriptor flag named FUNCTIONFS_CONFIG0_SETUP. When this flag is enabled, FunctionFS userspace drivers can process non-standard control requests in configuration 0. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: composite: let USB functions process ctrl reqs in cfg0Felix Hädicke
It can sometimes be necessary for gadget drivers to process non-standard control requests, which host devices can send without having sent USB_REQ_SET_CONFIGURATION. Therefore, the req_match() usb_function method is enhanced with the new parameter "config0". When a USB configuration is active, this parameter is false. When a non-core control request is processed in composite_setup(), without an active configuration, req_match() of the USB functions of all available configurations which implement this function, is called with config0=true. Then the control request gets processed by the first usb_function instance whose req_match() returns true. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: f_fs: handle control requests not directed to interface or endpointFelix Hädicke
Introduces a new FunctionFS descriptor flag named FUNCTIONFS_ALL_CTRL_RECIP. When this flag is enabled, control requests, which are not explicitly directed to an interface or endpoint, can be handled. This allows FunctionFS userspace drivers to process non-standard control requests. Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-25usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_alignFelipe F. Tonello
USB spec specifies wMaxPacketSize to be little endian (as other properties), so when using this variable in the driver we should convert to the current CPU endianness if necessary. This patch also introduces usb_ep_align() which does always returns the aligned buffer size for an endpoint. This is useful to be used by USB requests allocator functions. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-08-18Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two lockless_dereference() related fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/barriers: Suppress sparse warnings in lockless_dereference() Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"
2016-08-18locking/barriers: Suppress sparse warnings in lockless_dereference()Johannes Berg
After Peter's commit: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") ... we get a lot of sparse warnings (one for every rcu_dereference, and more) since the expression here is assigning to the wrong address space. Instead of validating that 'p' is a pointer this way, instead make it fail compilation when it's not by using sizeof(*(p)). This will not cause any sparse warnings (tested, likely since the address space is irrelevant for sizeof), and will fail compilation when 'p' isn't a pointer type. Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type") Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
2016-08-17net_sched: convert tcf_exts from list to pointer arrayWANG Cong
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: move tc offload macros to pkt_cls.hWANG Cong
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: fix a typo in tc_for_each_action()WANG Cong
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15gre: set inner_protocol on xmitSimon Horman
Ensure that the inner_protocol is set on transmit so that GSO segmentation, which relies on that field, works correctly. This is achieved by setting the inner_protocol in gre_build_header rather than each caller of that function. It ensures that the inner_protocol is set when gre_fb_xmit() is used to transmit GRE which was not previously the case. I have observed this is not the case when OvS transmits GRE using lwtunnel metadata (which it always does). Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: remove type_check from dev_get_nest_level()Sabrina Dubroca
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13ipv6: suppress sparse warnings in IP6_ECN_set_ce()Johannes Berg
Pass the correct type __wsum to csum_sub() and csum_add(). This doesn't really change anything since __wsum really *is* __be32, but removes the address space warnings from sparse. Cc: Eric Dumazet <edumazet@google.com> Fixes: 34ae6a1aa054 ("ipv6: update skb->csum when CE mark is propagated") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "KVM: - lock kvm_device list to prevent corruption on device creation. PPC: - split debugfs initialization from creation of the xics device to unlock the newly taken kvm lock earlier. s390: - prevent userspace from triggering two WARN_ON_ONCE. MIPS: - fix several issues in the management of TLB faults (Cc: stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MIPS: KVM: Propagate kseg0/mapped tlb fault errors MIPS: KVM: Fix gfn range check in kseg0 tlb faults MIPS: KVM: Add missing gfn range check MIPS: KVM: Fix mapped fault broken commpage handling KVM: Protect device ops->create and list_add with kvm->lock KVM: PPC: Move xics_debugfs_init out of create KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed KVM: s390: set the prefix initially properly
2016-08-13Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - an NVMe fix from Gabriel, fixing a suspend/resume issue on some setups - addition of a few missing entries in the block queue sysfs documentation, from Joe - a fix for a sparse shadow warning for the bvec iterator, from Johannes - a writeback deadlock involving raid issuing barriers, and not flushing the plug when we wakeup the flusher threads. From Konstantin - a set of patches for the NVMe target/loop/rdma code, from Roland and Sagi * 'for-linus' of git://git.kernel.dk/linux-block: bvec: avoid variable shadowing warning doc: update block/queue-sysfs.txt entries nvme: Suspend all queues before deletion mm, writeback: flush plugged IO in wakeup_flusher_threads() nvme-rdma: Remove unused includes nvme-rdma: start async event handler after reconnecting to a controller nvmet: Fix controller serial number inconsistency nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads nvmet-rdma: Correctly handle RDMA device hot removal nvme-rdma: Make sure to shutdown the controller if we can nvme-loop: Remove duplicate call to nvme_remove_namespaces nvme-rdma: Free the I/O tags when we delete the controller nvme-rdma: Remove duplicate call to nvme_remove_namespaces nvme-rdma: Fix device removal handling nvme-rdma: Queue ns scanning after a sucessful reconnection nvme-rdma: Don't leak uninitialized memory in connect request private data
2016-08-12bpf: fix bpf_skb_in_cgroup helper namingDaniel Borkmann
While hashing out BPF's current_task_under_cgroup helper bits, it came to discussion that the skb_in_cgroup helper name was suboptimally chosen. Tejun says: So, I think in_cgroup should mean that the object is in that particular cgroup while under_cgroup in the subhierarchy of that cgroup. Let's rename the other subhierarchy test to under too. I think that'd be a lot less confusing going forward. [...] It's more intuitive and gives us the room to implement the real "in" test if ever necessary in the future. Since this touches uapi bits, we need to change this as long as v4.8 is not yet officially released. Thus, change the helper enum and rename related bits. Fixes: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Reference: http://patchwork.ozlabs.org/patch/658500/ Suggested-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2016-08-12Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a perf-cgroups fix and an AUX events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add enable_box for client MSR uncore perf/x86/intel/uncore: Fix uncore num_counters uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions perf/core: Set cgroup in CPU contexts for new cgroup events perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash perf probe ppc64le: Fix probe location when using DWARF perf probe: Add function to post process kernel trace events tools: Sync cpufeatures headers with the kernel toops: Sync tools/include/uapi/linux/bpf.h with the kernel tools: Sync cpufeatures.h and vmx.h with the kernel perf probe: Support signedness casting perf stat: Avoid skew when reading events perf probe: Fix module name matching perf probe: Adjust map->reloc offset when finding kernel symbol from map perf hists: Trim libtraceevent trace_seq buffers perf script: Add 'bpf-output' field to usage message
2016-08-12Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes: lockstat fix, futex fix on !MMU systems, big endian fix for qrwlocks and a race fix for pvqspinlocks" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/pvqspinlock: Fix a bug in qstat_read() locking/pvqspinlock: Fix double hash race locking/qrwlock: Fix write unlock bug on big endian systems futex: Assume all mappings are private on !MMU systems
2016-08-12Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A fix for an MSI regression" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Make sure PCI MSIs are activated early
2016-08-12Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs multiple different security services (e.g. krb5i and krb5p). - Stable patch to fix a regression introduced by the use of SO_REUSEPORT, and that prevented the use of multiple different NFS versions to the same server. - TCP socket reconnection timer fixes. - Patch from Neil to disable the use of IPv6 temporary addresses" * tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Cap the transport reconnection timer at 1/2 lease period NFSv4: Cleanup the setting of the nfs4 lease period SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout SUNRPC: Fix reconnection timeouts NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED SUNRPC: disable the use of IPv6 temporary addresses. SUNRPC: allow for upcalls for same uid but different gss service SUNRPC: Fix up socket autodisconnect SUNRPC: Handle EADDRNOTAVAIL on connection failures
2016-08-12Merge tag 'powerpc-4.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some powerpc fixes for 4.8: Misc: - powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin - powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur - powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy - cxl: Set psl_fir_cntl to production environment value from Frederic Barrat - powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli - cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud - powerpc/vdso: Add missing include file from Guenter Roeck - powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva - powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy - powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter - crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard - powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens Benjamin Herrenschmidt: - powerpc/32: Fix crash during static key init - powerpc: Update obsolete comment in setup_32.c about early_init() - powerpc: Print the kernel load address at the end of prom_init() - powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs - powerpc/xics: Properly set Edge/Level type and enable resend Mahesh Salgaonkar: - powerpc/book3s: Fix MCE console messages for unrecoverable MCE. - powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. - powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h - powerpc/powernv: Load correct TOC pointer while waking up from winkle. Andrew Donnellan: - cxl: Fix sparse warnings - cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests Michael Ellerman: - selftests/powerpc: Specify we expect to build with std=gnu99 - powerpc/Makefile: Use cflags-y/aflags-y for setting endian options - powerpc/pci: Fix endian bug in fixed PHB numbering" * tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits) selftests/powerpc: Specify we expect to build with std=gnu99 powerpc/vdso: Fix build rules to rebuild vdsos correctly powerpc/Makefile: Use cflags-y/aflags-y for setting endian options powerpc/32: Fix crash during static key init powerpc: Update obsolete comment in setup_32.c about early_init() powerpc: Print the kernel load address at the end of prom_init() powerpc/ptrace: Fix coredump since ptrace TM changes powerpc/32: Fix csum_partial_copy_generic() cxl: Set psl_fir_cntl to production environment value powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs powerpc/book3s: Fix MCE console messages for unrecoverable MCE. powerpc/pci: Fix endian bug in fixed PHB numbering powerpc/eeh: Switch to conventional PCI address output in EEH log cxl: Fix sparse warnings cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests cxl: Use fixed width predefined types in data structure. powerpc/vdso: Add missing include file powerpc: Fix unused function warning 'lmb_to_memblock' powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h ...
2016-08-12KVM: Protect device ops->create and list_add with kvm->lockChristoffer Dall
KVM devices were manipulating list data structures without any form of synchronization, and some implementations of the create operations also suffered from a lack of synchronization. Now when we've split the xics create operation into create and init, we can hold the kvm->lock mutex while calling the create operation and when manipulating the devices list. The error path in the generic code gets slightly ugly because we have to take the mutex again and delete the device from the list, but holding the mutex during anon_inode_getfd or releasing/locking the mutex in the common non-error path seemed wrong. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-12KVM: PPC: Move xics_debugfs_init out of createChristoffer Dall
As we are about to hold the kvm->lock during the create operation on KVM devices, we should move the call to xics_debugfs_init into its own function, since holding a mutex over extended amounts of time might not be a good idea. Introduce an init operation on the kvm_device_ops struct which cannot fail and call this, if configured, after the device has been created. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Misc fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: deprecate old transport virtio/s390: keep early_put_chars virtio_blk: Fix a slient kernel panic virtio-vsock: fix include guard typo vhost/vsock: fix vhost virtio_vsock_pkt use-after-free 9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc() virtio: fix error handling for debug builds virtio: fix memory leak in virtqueue_add()
2016-08-11bvec: avoid variable shadowing warningJohannes Berg
Due to the (indirect) nesting of min(..., min(...)), sparse will show a variable shadowing warning whenever bvec.h is included. Avoid that by assigning the inner min() to a temporary variable first. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Use mod_timer_pending() to avoid reactivating a dead expectation in the h323 conntrack helper, from Liping Zhang. 2) Oneliner to fix a type in the register name defined in the nf_tables header. 3) Don't try to look further when we find an inactive elements with no descendants in the rbtree set implementation, otherwise we crash. 4) Handle valid zero CSeq in the SIP conntrack helper, from Christophe Leroy. 5) Don't display a trailing slash in conntrack helper with no classes via /proc/net/nf_conntrack_expect, from Liping Zhang. 6) Fix an expectation leak during creation from the nfqueue path, again from Liping Zhang. 7) Validate netlink port ID in verdict message from nfqueue, otherwise an injection can be possible. Again from Zhang. 8) Reject conntrack tuples with different transport protocol on original and reply tuples, also from Zhang. 9) Validate offset and length in nft_exthdr, make sure they are under sizeof(u8), from Laura Garcia Liebana. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10locking/qrwlock: Fix write unlock bug on big endian systemspan xinhui
This patch aims to get rid of endianness in queued_write_unlock(). We want to set __qrwlock->wmode to NULL, however the address is not &lock->cnts in big endian machine. That causes queued_write_unlock() write NULL to the wrong field of __qrwlock. So implement __qrwlock_write_byte() which returns the correct __qrwlock->wmode address. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman.Long@hpe.com Cc: arnd@arndb.de Cc: boqun.feng@gmail.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1468835259-4486-1-git-send-email-xinhui.pan@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/core: Set cgroup in CPU contexts for new cgroup eventsDavid Carrillo-Cisneros
There's a perf stat bug easy to observer on a machine with only one cgroup: $ perf stat -e cycles -I 1000 -C 0 -G / # time counts unit events 1.000161699 <not counted> cycles / 2.000355591 <not counted> cycles / 3.000565154 <not counted> cycles / 4.000951350 <not counted> cycles / We'd expect some output there. The underlying problem is that there is an optimization in perf_cgroup_sched_{in,out}() that skips the switch of cgroup events if the old and new cgroups in a task switch are the same. This optimization interacts with the current code in two ways that cause a CPU context's cgroup (cpuctx->cgrp) to be NULL even if a cgroup event matches the current task. These are: 1. On creation of the first cgroup event in a CPU: In current code, cpuctx->cpu is only set in perf_cgroup_sched_in, but due to the aforesaid optimization, perf_cgroup_sched_in will run until the next cgroup switches in that CPU. This may happen late or never happen, depending on system's number of cgroups, CPU load, etc. 2. On deletion of the last cgroup event in a cpuctx: In list_del_event, cpuctx->cgrp is set NULL. Any new cgroup event will not be sched in because cpuctx->cgrp == NULL until a cgroup switch occurs and perf_cgroup_sched_in is executed (updating cpuctx->cgrp). This patch fixes both problems by setting cpuctx->cgrp in list_add_event, mirroring what list_del_event does when removing a cgroup event from CPU context, as introduced in: commit 68cacd29167b ("perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()") With this patch, cpuctx->cgrp is always set/clear when installing/removing the first/last cgroup event in/from the CPU context. With cpuctx->cgrp correctly set, event_filter_match works as intended when events are sched in/out. After the fix, the output is as expected: $ perf stat -e cycles -I 1000 -a -G / # time counts unit events 1.004699159 627342882 cycles / 2.007397156 615272690 cycles / 3.010019057 616726074 cycles / Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1470124092-113192-1-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-09Revert "printk: create pr_<level> functions"Linus Torvalds
This reverts commit 874f9c7da9a4acbc1b9e12ca722579fb50e4d142. Geert Uytterhoeven reports: "This change seems to have an (unintendent?) side-effect. Before, pr_*() calls without a trailing newline characters would be printed with a newline character appended, both on the console and in the output of the dmesg command. After this commit, no new line character is appended, and the output of the next pr_*() call of the same type may be appended, like in: - Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000 - Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM) + Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)" Joe Perches says: "No, that is not intentional. The newline handling code inside vprintk_emit is a bit involved and for now I suggest a revert until this has all the same behavior as earlier" Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Requested-by: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-09Merge tag 'trace-v4.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix tick_stop tracepoint symbols for user export. Luiz Capitulino noticed that the tick_stop tracepoint wasn't being parsed properly by the tracing user space tools. This was due to the TRACE_DEFINE_ENUM() being set to a define, when it should have been set to the enum itself. The define was of the MASK that used the BIT to shift. The BIT was the enum and by adding that, everything gets converted nicely. The MASK is still kept just in case it gets converted to an enum in the future" * tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix tick_stop tracepoint symbols for user export
2016-08-09Merge tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "This contains a bunch of amdgpu fixes, and some i915 regression fixes. It also contains some fixes for an older regression with some EDID changes and some 6bpc panels. Then there are the lockdep, cirrus and rcar-du regression fixes from this window" * tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: Fix NULL pointer dereference when registering the fbdev drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS". drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown" drm/edid: Add 6 bpc quirk for display AEO model 0. drm: Paper over locking inversion after registration rework drm: rcar-du: Link HDMI encoder with bridge drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/i915/fbdev: Check for the framebuffer before use drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
2016-08-09tracing: Fix tick_stop tracepoint symbols for user exportSteven Rostedt (Red Hat)
The symbols used in the tick_stop tracepoint were not being converted properly into integers in the trace_stop format file. Instead we had this: print fmt: "success=%d dependency=%s", REC->success, __print_symbolic(REC->dependency, { 0, "NONE" }, { (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" }, { (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" }, { (1 << TICK_DEP_BIT_SCHED), "SCHED" }, { (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" }) User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other symbols used to do the bit shifting. The reason is that the conversion was done with using the TICK_DEP_MASK_* symbols which are just macros that convert to the BIT shift itself (with the exception of NONE, which was converted properly, because it doesn't use bits, and is defined as zero). The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to have this properly converted for user space tools to parse this event. Cc: stable@vger.kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: e6e6cc22e067 ("nohz: Use enum code for tick stop failure tracing message") Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-08-09virtio-vsock: fix include guard typoStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-09genirq/msi: Make sure PCI MSIs are activated earlyMarc Zyngier
Bharat Kumar Gogada reported issues with the generic MSI code, where the end-point ended up with garbage in its MSI configuration (both for the vector and the message). It turns out that the two MSI paths in the kernel are doing slightly different things: generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI And it turns out that end-points are allowed to latch the content of the MSI configuration registers as soon as MSIs are enabled. In Bharat's case, the end-point ends up using whatever was there already, which is not what you want. In order to make things converge, we introduce a new MSI domain flag (MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set, this flag forces the programming of the end-point as soon as the MSIs are allocated. A consequence of this is that we have an extra activate in irq_startup, but that should be without much consequence. tglx: - Several people reported a VMWare regression with PCI/MSI-X passthrough. It turns out that the patch also cures that issue. - We need to have a look at the MSI disable interrupt path, where we write the msg to all zeros without disabling MSI in the PCI device. Is that correct? Fixes: 52f518a3a7c2 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts" Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru> Reported-by: Matthias Prager <linux@matthiasprager.de> Reported-by: Jason Taylor <jason.taylor@simplivity.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-09cxl: Use fixed width predefined types in data structure.Philippe Bergheaud
This patch fixes a regression introduced by commit b810253bd934 ("cxl: Add mechanism for delivering AFU driver specific events"). It changes the type u8 to __u8 in the uapi header cxl.h, because the former is a kernel internal type, and may not be defined in userland build environments, in particular when cross-compiling libcxl on x86_64 linux machines (RHEL6.7 and Ubuntu 16.04). This patch also changes the size of the field data_size, and makes it constant, to support 32-bit userland applications running on big-endian ppc64 kernels transparently. mpe: This is an ABI change, however the ABI was only added during the 4.8 merge window so has never been part of a released kernel - therefore we give ourselves permission to change it. Fixes: b810253bd934 ("cxl: Add mechanism for delivering AFU driver specific events") Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-08qed: Add dcbx app support for IEEE Selection Field.Sudarsana Reddy Kalluru
MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08Merge tag 'usercopy-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
2016-08-08bpf: fix checksum fixups on bpf_skb_store_bytesDaniel Borkmann
bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way. Where we ran into an issue with bpf_skb_store_bytes() is when we did a single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The underlying issue has been tracked down to a buffer alignment issue. Meaning, that csum_partial() computations via skb_postpull_rcsum() and skb_postpush_rcsum() pair invoked had a wrong result since they operated on an odd address for the hoplimit, while other computations were done on an even address. This mix doesn't work as-is with skb_postpull_rcsum(), skb_postpush_rcsum() pair as it always expects at least half-word alignment of input buffers, which is normally the case. Thus, instead of these helpers using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(), csum_block_add(), respectively. For unaligned offsets, they rotate the sum to align it to a half-word boundary again, otherwise they work the same as csum_sub() and csum_add(). Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers use a 0 constant for offset so that the compiler optimizes the offset & 1 test away and generates the same code as with csum_sub()/_add(). Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08unsafe_[get|put]_user: change interface to use a error target labelLinus Torvalds
When I initially added the unsafe_[get|put]_user() helpers in commit 5b24a7a2aa20 ("Add 'unsafe' user access functions for batched accesses"), I made the mistake of modeling the interface on our traditional __[get|put]_user() functions, which return zero on success, or -EFAULT on failure. That interface is fairly easy to use, but it's actually fairly nasty for good code generation, since it essentially forces the caller to check the error value for each access. In particular, since the error handling is already internally implemented with an exception handler, and we already use "asm goto" for various other things, we could fairly easily make the error cases just jump directly to an error label instead, and avoid the need for explicit checking after each operation. So switch the interface to pass in an error label, rather than checking the error value in the caller. Best do it now before we start growing more users (the signal handling code in particular would be a good place to use the new interface). So rather than if (unsafe_get_user(x, ptr)) ... handle error .. the interface is now unsafe_get_user(x, ptr, label); where an error during the user mode fetch will now just cause a jump to 'label' in the caller. Right now the actual _implementation_ of this all still ends up being a "if (err) goto label", and does not take advantage of any exception label tricks, but for "unsafe_put_user()" in particular it should be fairly straightforward to convert to using the exception table model. Note that "unsafe_get_user()" is much harder to convert to a clever exception table model, because current versions of gcc do not allow the use of "asm goto" (for the exception) with output values (for the actual value to be fetched). But that is hopefully not a limitation in the long term. [ Also note that it might be a good idea to switch unsafe_get_user() to actually _return_ the value it fetches from user space, but this commit only changes the error handling semantics ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-08sctp: Export struct sctp_info to userspacePhil Sutter
This is required to correctly interpret INET_DIAG_INFO messages exported by sctp_diag module. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-08netfilter: nf_tables: s/MFT_REG32_01/NFT_REG32_01Pablo Neira Ayuso
MFT_REG32_01 is a typo, rename this to NFT_REG32_01. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-08Merge branch 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next A few fixes for amdgpu and ttm for 4.8 - fix a ttm regression caused by the new pipelining code - fixes for mullins on amdgpu - updated golden settings for amdgpu * 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: drm/ttm: Wait for a BO to become idle before unbinding it from GTT drm/amdgpu: update golden setting of polaris10 drm/amdgpu: update golden setting of stoney drm/amdgpu: update golden setting of polaris11 drm/amdgpu: update golden setting of carrizo drm/amdgpu: update golden setting of iceland drm/amd/amdgpu: change pptable output format from ASCII to binary drm/amdgpu/ci: add mullins to default case for smc ucode drm/amdgpu/gmc7: add missing mullins case
2016-08-07Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
2016-08-07Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property