| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.11
There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.
This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.
- Lots more cleanups and simplifications from Morimoto-san.
- Support for some basic DPCM systems in the audio graph card from
Sameer Pujar.
- Remove some old pre-DT Freescale drivers for platforms that are now
DT only.
- Move selection of which Intel DSP implementation to use to boot time
rather than requiring it to be selected at build time.
- Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
Qualcomm SM8250 and simple GPIO based muxes.
|
|
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason, the original aux bus patch had some really long lines
in a few places, probably due to it being a very long-lived patch in
development by many different people. Fix that up so that the two files
all have the same length lines and function formatting styles.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8oiSFTpYHw1xE/o@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's an effort to move the remove() callback in the driver core to
not return an int, as nothing can be done if this function fails. To
make that effort easier, make the aux bus remove function void to start
with so that no users have to be changed sometime in the future.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8ohB1ks1NK7kPop@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No need to include slab.h in include/linux/auxiliary_bus.h, as it is not
needed there. Move it to drivers/base/auxiliary.c instead.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8og8xi3WkoYXet9@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'20201104_yung_chuan_liao_regmap_soundwire_asoc_add_soundwire_sdca_support' (early part) into asoc-5.11
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.11
soundwire-for-asoc-5.11
Tag for asoc to resolve build dependency with commit b7cab9be7c16
("soundwire: SDCA: detect sdca_cascade interrupt")
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.11
|
|
<kai.vehmanen@linux.intel.com>:
Series introducing a modified boot sequence for the Intel Ice Lake
platform. While no bugs are currently open for this, the current
DSP boot implementation does not follow the full programming sequence.
This patchset is the first instance where SOF driver uses data in
the extended manifest (part of the firmware binary), to influence
the boot process. IPC cannot be used to get this information, as it
is already needed for early boot.
This change is backwards compatible with old firmware versions,
where extended manifest is not available.
Fred Oh (5):
ASoC: SOF: ops: add parse_platform_ext_manifest() op
ASoC: SOF: Intel: hda: define parse_platform_ext_manifest op
ASoC: SOF: ext_manifest: parse cavs extra config data elem
ASoC: SOF: ops: modify the signature of stall op
ASoC: SOF: Intel: hda: add sof_icl_ops for ICL platforms
include/sound/sof/ext_manifest.h | 1 +
sound/soc/sof/intel/Makefile | 2 +-
sound/soc/sof/intel/apl.c | 3 +
sound/soc/sof/intel/cnl.c | 19 +---
sound/soc/sof/intel/ext_manifest.h | 35 +++++++
sound/soc/sof/intel/hda-loader.c | 100 ++++++++++++++++++++
sound/soc/sof/intel/hda.h | 11 +++
sound/soc/sof/intel/icl.c | 145 +++++++++++++++++++++++++++++
sound/soc/sof/intel/tgl.c | 3 +
sound/soc/sof/loader.c | 3 +
sound/soc/sof/ops.h | 14 ++-
sound/soc/sof/sof-pci-dev.c | 2 +-
sound/soc/sof/sof-priv.h | 7 +-
13 files changed, 324 insertions(+), 21 deletions(-)
create mode 100644 sound/soc/sof/intel/ext_manifest.h
create mode 100644 sound/soc/sof/intel/icl.c
--
2.28.0
|
|
ALSA SoC has soc-jack.c, but doesn't have soc-jack.h.
This patch creates new soc-jack.h and moves snd_soc_jack_xxx()
from soc.h.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wny3u3zg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-core.c don't need sound/jack.h anymore, but asoc.h needs it.
This patch fixup header magic.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2iju3zm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201127192312.2861127-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
With a stream with low bitrate, user can't pause or resume the stream
near the end of the stream because current ALSA doesn't allow it.
If the stream has very low bitrate enough to store whole stream into
the buffer, user can't do anything except stop the stream and then
restart it from the first because most of applications call draining
after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be
enhanced.
To prevent malfunction in HW drivers which don't support pause
during draining, pause during draining will only work if HW driver
enable this feature explicitly by calling
snd_compr_use_pause_in_draining().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire 1.1 specification only allowed for reads and writes of
bytes. The SoundWire 1.2 specification adds a new capability to
transfer "Multi-Byte Quantities" (MBQ) across the bus. The transfers
still happens one-byte-at-a-time, but the update is atomic.
For example when writing a 16-bit volume, the first byte transferred
is only taken into account when the second byte is successfully
transferred.
The mechanism is symmetrical for read and writes:
- On a read, the address of the last byte to be read is modified by
setting the MBQ bit
- On a write, the address of all but the last byte to be written are
modified by setting the MBQ bit. The address for the last byte relies
on the MBQ bit being cleared.
The current definitions for MBQ-based controls in the SDCA draft
standard are limited to 16 bits for volumes, so for now this is the
only supported format. An update will be provided if and when support
for 24-bit and 32-bit values is specified by the SDCA standard.
One possible objection is that this code could have been handled with
regmap-sdw.c. However this is a new spec addition not handled by every
SoundWire 1.1 and non-SDCA device, so there's no reason to load code
that will never be used.
Also in practice it's extremely unlikely that CONFIG_REGMAP would not
be selected with CONFIG_REGMAP_MBQ selected. However there's no
functional dependency between the two modules so they can be selected
separately.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The upcoming SDCA (SoundWire Device Class Audio) specification defines
a hierarchical encoding to interface with Class-defined capabilities.
The specification is not yet accessible to the general public but this
information is released with explicit permission from the MIPI Board
to avoid delays with SDCA support on Linux platforms.
A block of 64 MBytes of register addresses are allocated to SDCA
controls, starting at address 0x40000000. The 26 LSBs which identify
individual controls are set based on the following variables:
- Function Number. An SCDA device can be split in up to 8 independent
Functions. Each of these Functions is described in the SDCA
specification, e.g. Smart Amplifier, Smart Microphone, Simple
Microphone, Jack codec, HID, etc.
- Entity Number. Within each Function, an Entity is an identifiable
block. Up to 127 Entities are connected in a pre-defined
graph (similar to USB), with Entity0 reserved for Function-level
configurations. In contrast to USB, the SDCA spec pre-defines
Function Types, topologies, and allowed options, i.e. the degree of
freedom is not unlimited to limit the possibility of errors in
descriptors leading to software quirks.
- Control Selector. Within each Entity, the SDCA specification defines
48 controls such as Mute, Gain, AGC, etc, and 16 implementation
defined ones. Some Control Selectors might be used for low-level
platform setup, and other exposed to applications and users. Note
that the same Control Selector capability, e.g. Latency control,
might be located at different offsets in different entities, the
Control Selector mapping is Entity-specific.
- Control Number. Some Control Selectors allow channel-specific values
to be set, with up to 64 channels allowed. This is mostly used for
volume control.
- Current/Next values. Some Control Selectors are
'Dual-Ranked'. Software may either update the Current value directly
for immediate effect. Alternatively, software may write into the
'Next' values and update the SoundWire 1.2 'Commit Groups' register
to copy 'Next' values into 'Current' ones in a synchronized
manner. This is different from bank switching which is typically
used to change the bus configuration only.
- MBQ. the Multi-Byte Quantity bit is used to provide atomic updates
when accessing more that one byte, for example a 16-bit volume
control would be updated consistently, the intermediate values
mixing old MSB with new LSB are not applied.
These 6 parameters are used to build a 32-bit address to access the
desired Controls. Because of address range, paging is required, but
the most often used parameter values are placed in the lower 16 bits
of the address. This helps to keep the paging registers constant while
updating Controls for a specific Device/Function.
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201103172226.4278-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
=> 3) snd_soc_link_compr_startup/shutdown()
This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ui5iwf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
=> 2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfey5iwk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Section comment should be coherent with IPC prefix from define
names.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each define value in series should be aligned and tabs should
be used instead of spaces to follow code-style.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire 1.2 specification defines an "SDCA cascade" bit which
handles a logical OR of all SDCA interrupt sources (up to 30 defined).
Due to limitations of the addressing space, this bit is located in the
SDW_DP0_INT register when DP0 is used, or alternatively in the
DP0_SDCA_Support_INTSTAT register when DP0 is not used.
To allow for both cases to be handled, this bit will be checked in the
main device-level interrupt handling code. This will result in the
register being read twice if DP0 is enabled, but it's not clear how to
optimize this case. It's also more logical to deal with this interrupt
at the device than the port level, this bit is really not DP0 specific
and its location in the DP0_INTSTAT bit is only due to the lack of
free space in SCP_INTSTAT_1.
The SDCA_Cascade bit cannot be masked or cleared, so the interrupt
handling only forwards the detection to the Slave driver, which will
deal with reading the relevant SDCA status bits and clearing them. The
bus driver only signals the detection.
The communication with the Slave driver is based on the same interrupt
callback, with only an extension to provide the status of the
sdca_cascade bit.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201104152358.9518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A couple of scheduler fixes:
- Make the conditional update of the overutilized state work
correctly by caching the relevant flags state before overwriting
them and checking them afterwards.
- Fix a data race in the wakeup path which caused loadavg on ARM64
platforms to become a random number generator.
- Fix the ordering of the iowaiter accounting operations so it can't
be decremented before it is incremented.
- Fix a bug in the deadline scheduler vs. priority inheritance when a
non-deadline task A has inherited the parameters of a deadline task
B and then blocks on a non-deadline task C.
The second inheritance step used the static deadline parameters of
task A, which are usually 0, instead of further propagating task
B's parameters. The zero initialized parameters trigger a bug in
the deadline scheduler"
* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix priority inheritance with multiple scheduling classes
sched: Fix rq->nr_iowait ordering
sched: Fix data-race in wakeup
sched/fair: Fix overutilized update in enqueue_task_fair()
|
|
Merge misc fixes from Andrew Morton:
"8 patches.
Subsystems affected by this patch series: mm (madvise, pagemap,
readahead, memcg, userfaultfd), kbuild, and vfs"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix madvise WILLNEED performance problem
libfs: fix error cast of negative value in simple_attr_write()
mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
mm: memcg/slab: fix root memcg vmstats
mm: fix readahead_page_batch for retry entries
mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
compiler-clang: remove version check for BPF Tracing
mm/madvise: fix memory leak from process_madvise
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A final set of miscellaneous bug fixes for ext4"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix bogus warning in ext4_update_dx_flag()
jbd2: fix kernel-doc markups
ext4: drop fast_commit from /proc/mounts
|
|
Both btrfs and fuse have reported faults caused by seeing a retry entry
instead of the page they were looking for. This was caused by a missing
check in the iterator.
As can be seen in the below panic log, the accessing 0x402 causes a
panic. In the xarray.h, 0x402 means RETRY_ENTRY.
BUG: kernel NULL pointer dereference, address: 0000000000000402
CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1
Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020
RIP: 0010:fuse_readahead+0x152/0x470 [fuse]
Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01
RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246
RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60
RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0
R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68
FS: 00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0
Call Trace:
read_pages+0x83/0x270
page_cache_readahead_unbounded+0x197/0x230
generic_file_buffered_read+0x57a/0xa20
new_sync_read+0x112/0x1a0
vfs_read+0xf8/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 042124cc64c3 ("mm: add new readahead_control API")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
[dan.j.williams@intel.com: v4]
Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
bpftrace parses the kernel headers and uses Clang under the hood.
Remove the version check when __BPF_TRACING__ is defined (as bpftrace
does) so that this tool can continue to parse kernel headers, even with
older clang sources.
Fixes: commit 1f7a44f63e6c ("compiler-clang: add build check for clang 10.0.1")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lkml.kernel.org/r/20201104191052.390657-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes for two fairly obscure but annoying when triggered races in
iSCSI"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: Fix cmd abort fabric stop race
scsi: libiscsi: Fix NOP race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Two straightforward vt-d fixes:
- Fix boot when intel iommu initialisation fails under TXT (tboot)
- Fix intel iommu compilation error when DMAR is enabled without ATS
and temporarily update IOMMU MAINTAINERs entry"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Temporarily add myself to the IOMMU entry
iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
iommu/vt-d: Avoid panic if iommu init fails in tboot system
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes: the only core change is a minor error
code handling in the control API, and all the rest are device-specific
fixes, mostly quirks, fixups and ASoC Intel fixes.
It looks boring, and good so"
* tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: mixart: Fix mutex deadlock
ALSA: hda/ca0132: Fix compile warning without PCI
ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
ALSA: usb-audio: Add delay quirk for all Logitech USB devices
ASoC: Intel: catpt: Correct clock selection for dai trigger
ASoC: Intel: catpt: Skip position update for unprepared streams
ASoC: qcom: lpass-platform: Fix memory leak
ASoC: Intel: KMB: Fix S24_LE configuration
ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vid
ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 mobo
ALSA: firewire: Clean up a locking issue in copy_resp_to_buf()
ASoC: rt1015: increase the time to detect BCLK
ALSA: ctl: fix error path at adding user-defined element set
ALSA: hda/realtek - HP Headset Mic can't detect after boot
ALSA: hda/realtek - Add supported mute Led for HP
ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)
ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button
ASoC: rt1015: add delay to fix pop noise from speaker
|
|
The ignore_machine field in the component driver is used to
ignore the FE DAI links defined in the machine driver,
override BE fixups and set the stream names for the
DAI links defined in the machine driver. This is required
to make SOF compatible with the legacy machine drivers.
In the case of the nocodec machine driver in SOF, there is
no need to rely upon this ignore_machine logic in the core.
Modify the machine driver to set DAI link stream names and the
BE hw_params_fixup callback appropriately.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120141653.2160134-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implicit values may have a length of 15bits (s16) so we need to declare
the proper size so we don't get undefined behaviour. This appears to be
arch and compiler dependent. This commit is to keep the headers aligned
between the firmware and kernel. UBSan discovered this bug in the
firmware.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120144025.2166023-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kernel-doc markup should use this format:
identifier - description
They should not have any type before that, as otherwise
the parser won't do the right thing.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This is a relatively large set of fixes, the bulk of it being a series
from Lukas Wunner which fixes confusion with the lifetime of driver
data allocated along with the SPI controller structure that's been
created as part of the conversion to devm APIs.
The simplest fix, explained in detail in Lukas' commit message, is to
move to a devm_ function for allocation of the controller and hence
driver data in order to push the free of that after anything tries to
reference the driver data in the remove path. This results in a
relatively large diff due to the addition of a new function but isn't
particularly complex.
There's also a fix from Sven van Asbroeck which fixes yet more fallout
from the conflicts between the various different places one can
configure the polarity of GPIOs in modern systems.
Otherwise everything is fairly small and driver specific"
* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: npcm-fiu: Don't leak SPI master in probe error path
spi: dw: Set transfer handler before unmasking the IRQs
spi: cadence-quadspi: Fix error return code in cqspi_probe
spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
spi: lpspi: Fix use-after-free on unbind
spi: bcm-qspi: Fix use-after-free on unbind
spi: bcm2835aux: Fix use-after-free on unbind
spi: bcm2835: Fix use-after-free on unbind
spi: Introduce device-managed SPI controller allocation
spi: fsi: Fix transfer returning without finalizing message
spi: fix client driver breakages when using GPIO descriptors
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
|
|
IPV6=m
NF_DEFRAG_IPV6=y
ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'
Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.
Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c843266 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")
Fixes: 9d9e937b1c8b ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Intel machine drivers are used by parent platform drivers based on
closed-source firmware (Atom/SST and catpt) and SOF-based ones.
In some cases for ACPI-based platforms, the behavior of machine
drivers needs to be modified depending on the parent type, typically
for card names and power management.
An initial solution based on passing a boolean flag as a platform
device parameter was tested earlier. Since it looked overkill, this
patch suggests instead a simple string comparison to identify an SOF
parent device/driver.
Suggested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mirror capabilities provided for PCI devices, so that distributions
can select which ACPI driver is loaded at run-time with kernel
parameters and DMI tables instead of forcing a build-time selection.
The "legacy" option supported for HDaudio has no meaning here and will
be ignored.
The 'SST' driver based on closed-source firmware has the priority to
avoid any impact on users, and the choice to use SOF is strictly
opt-in. This may change at some point when the 'SST' driver is
deprecated on Baytrail/Cherrytrail.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20201112223825.39765-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull nfsd fix from Bruce Fields:
"Just one quick fix for a tracing oops"
* tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Fix oops in the rpc_xdr_buf event class
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
|
|
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zh3l6gl8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component related function should be implemented at
soc-component.c.
This patch adds snd_soc_component_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rgx7v5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
