| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
|
|
Pull VFIO updates from Alex Williamson:
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
* tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio:
vfio: mdev: make a couple of functions and structure vfio_mdev_driver static
vfio-pci: Allow mapping MSIX BAR
vfio: Simplify capability helper
vfio-pci: Mask INTx if a device is not capabable of enabling it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov:
- evdev interface has been adjusted to extend the life of timestamps on
32 bit systems to the year of 2108
- Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
improve chances of detecting trackpoints on the pass-through port
- mms114 touchcsreen controller driver has been updated to support
generic device properties and work with mms152 cntrollers
- Goodix driver now supports generic touchscreen properties
- couple of drivers for AVR32 architecture are gone as the architecture
support has been removed from the kernel
- gpio-tilt driver has been removed as there are no mainline users and
the driver itself is using legacy APIs and relies on platform data
- MODULE_LINECSE/MODULE_VERSION cleanups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: goodix - use generic touchscreen_properties
Input: mms114 - fix typo in definition
Input: mms114 - use BIT() macro instead of explicit shifting
Input: mms114 - replace mdelay with msleep
Input: mms114 - add support for mms152
Input: mms114 - drop platform data and use generic APIs
Input: mms114 - mark as direct input device
Input: mms114 - do not clobber interrupt trigger
Input: edt-ft5x06 - fix error handling for factory mode on non-M06
Input: stmfts - set IRQ_NOAUTOEN to the irq flag
Input: auo-pixcir-ts - delete an unnecessary return statement
Input: auo-pixcir-ts - remove custom log for a failed memory allocation
Input: da9052_tsi - remove unused mutex
Input: docs - use PROPERTY_ENTRY_U32() directly
Input: synaptics-rmi4 - log when we create a guest serio port
Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
Input: synaptics-rmi4 - do not delete interrupt memory too early
Input: ad7877 - use managed resource allocations
Input: stmfts,s6sy671 - add SPDX identifier
Input: remove atmel-wm97xx touchscreen driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB and PHY driver update for 4.16-rc1.
Along with the normally expected XHCI, MUSB, and Gadget driver
patches, there are some PHY driver fixes, license cleanups, sysfs
attribute cleanups, usbip changes, and a raft of other smaller fixes
and additions.
Full details are in the shortlog.
All of these have been in the linux-next tree for a long time with no
reported issues"
* tag 'usb-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (137 commits)
USB: serial: pl2303: new device id for Chilitag
USB: misc: fix up some remaining DEVICE_ATTR() usages
USB: musb: fix up one odd DEVICE_ATTR() usage
USB: atm: fix up some remaining DEVICE_ATTR() usage
USB: move many drivers to use DEVICE_ATTR_WO
USB: move many drivers to use DEVICE_ATTR_RO
USB: move many drivers to use DEVICE_ATTR_RW
USB: misc: chaoskey: Use true and false for boolean values
USB: storage: remove old wording about how to submit a change
USB: storage: remove invalid URL from drivers
usb: ehci-omap: don't complain on -EPROBE_DEFER when no PHY found
usbip: list: don't list devices attached to vhci_hcd
usbip: prevent bind loops on devices attached to vhci_hcd
USB: serial: remove redundant initializations of 'mos_parport'
usb/gadget: Fix "high bandwidth" check in usb_gadget_ep_match_desc()
usb: gadget: compress return logic into one line
usbip: vhci_hcd: update 'status' file header and format
USB: serial: simple: add Motorola Tetra driver
CDC-ACM: apply quirk for card reader
usb: option: Add support for FS040U modem
...
|
|
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull seccomp updates from James Morris:
"Add support for retrieving seccomp metadata"
* 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
ptrace, seccomp: add support for retrieving seccomp metadata
seccomp: hoist out filter resolving logic
|
|
Pull RDMA subsystem updates from Jason Gunthorpe:
"Overall this cycle did not have any major excitement, and did not
require any shared branch with netdev.
Lots of driver updates, particularly of the scale-up and performance
variety. The largest body of core work was Parav's patches fixing and
restructing some of the core code to make way for future RDMA
containerization.
Summary:
- misc small driver fixups to
bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes
- several major feature adds to bnxt_re driver: SRIOV VF RoCE
support, HugePages support, extended hardware stats support, and
SRQ support
- a notable number of fixes to the i40iw driver from debugging scale
up testing
- more work to enable the new hip08 chip in the hns driver
- misc small ULP fixups to srp/srpt//ipoib
- preparation for srp initiator and target to support the RDMA-CM
protocol for connections
- add RDMA-CM support to srp initiator, srp target is still a WIP
- fixes for a couple of places where ipoib could spam the dmesg log
- fix encode/decode of FDR/EDR data rates in the core
- many patches from Parav with ongoing work to clean up
inconsistencies and bugs in RoCE support around the rdma_cm
- mlx5 driver support for the userspace features 'thread domain',
'wallclock timestamps' and 'DV Direct Connected transport'. Support
for the firmware dual port rocee capability
- core support for more than 32 rdma devices in the char dev
allocation
- kernel doc updates from Randy Dunlap
- new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss'
- one minor change to the kobject code acked by Greg KH"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits)
RDMA/nldev: Provide detailed QP information
RDMA/nldev: Provide global resource utilization
RDMA/core: Add resource tracking for create and destroy PDs
RDMA/core: Add resource tracking for create and destroy CQs
RDMA/core: Add resource tracking for create and destroy QPs
RDMA/restrack: Add general infrastructure to track RDMA resources
RDMA/core: Save kernel caller name when creating PD and CQ objects
RDMA/core: Use the MODNAME instead of the function name for pd callers
RDMA: Move enum ib_cq_creation_flags to uapi headers
IB/rxe: Change RDMA_RXE kconfig to use select
IB/qib: remove qib_keys.c
IB/mthca: remove mthca_user.h
RDMA/cm: Fix access to uninitialized variable
RDMA/cma: Use existing netif_is_bond_master function
IB/core: Avoid SGID attributes query while converting GID from OPA to IB
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
IB/umad: Fix use of unprotected device pointer
IB/iser: Combine substrings for three messages
IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"All kinds of misc stuff, without any unifying topic, from various
people.
Neil's d_anon patch, several bugfixes, introduction of kvmalloc
analogue of kmemdup_user(), extending bitfield.h to deal with
fixed-endians, assorted cleanups all over the place..."
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
alpha: osf_sys.c: use timespec64 where appropriate
alpha: osf_sys.c: fix put_tv32 regression
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
dcache: delete unused d_hash_mask
dcache: subtract d_hash_shift from 32 in advance
fs/buffer.c: fold init_buffer() into init_page_buffers()
fs: fold __inode_permission() into inode_permission()
fs: add RWF_APPEND
sctp: use vmemdup_user() rather than badly open-coding memdup_user()
snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
replace_user_tlv(): switch to vmemdup_user()
new primitive: vmemdup_user()
memdup_user(): switch to GFP_USER
eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
eventfd: fold eventfd_ctx_read() into eventfd_read()
eventfd: convert to use anon_inode_getfd()
nfs4file: get rid of pointless include of btrfs.h
uvc_v4l2: clean copyin/copyout up
vme_user: don't use __copy_..._user()
usx2y: don't bother with memdup_user() for 16-byte structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got 30 patches for this merge window. These generally fall into
five categories:
- code cleanups
- patches related to adding PUNCH_HOLE support to GFS2
- support for new fields in resource group headers
- a few bug fixes
- support for new fields in journal log headers. These new fields,
which were previously unused, are designed to make it easier to
track down file system corruption, and allow fsck.gfs2 to make more
intelligent decisions when finding and fixing file system
corruption.
Details:
- Two patches from Abhi Das, to trim the ordered writes list, which
used to grow uncontrollably until unmount.
- Several patches from Andreas Gruenbacher: remove an unused
parameter from function gfs2_write_jdata_pagevec, remove a
pointless BUG_ON, clean up an error patch in trunc_start, remove
some unused parameters from truncate, make gfs2_journaled_truncate
more efficient, clean up the support functions for truncate, fix
metadata read-ahead for truncate to make it faster, fix up the
non-recursive truncate code, rework and rename
gfs2_block_truncate_page, generalize the non-recursive truncate
code so it can take a range of values for punch_hole support,
introduce new PUNCH_HOLE support that take advantage of the
previous patches, add fallocate support with PUNCH_HOLE, fix some
typos in the comments, add the function gfs2_max_stuffed_size to
replace a piece of code that was needlessly repeated throughout
GFS2, a minor cleanup to function gfs2_page_add_databufs, get rid
of function gfs2_log_header_in in preparation for the new log
header fields, and also fix up some missing newlines in kernel
messages.
- Andy Price added a new field to resource groups to indicate where
the next one should be, to allow fsck.gfs2 to make better repairs.
He also added new rindex fields for consistency checking, and added
a crc field to resource group headers for consistency checking.
- I reduced redundancy in functions common to freeing dinodes, and
when writing log headers between the journalling code and journal
recovery code. Also added new fields to journal log headers based
on a prototype from Steve Whitehouse, and log the source of journal
log headers so we can better track down journal corruption. Minor
comment typo fix and a fix for a BUG in an unlink error path.
- Steve Whitehouse contributed a patch to fix an incorrect use of the
gfs2_blk2rgrpd function.
- Tetsuo Handa contributed a patch that fixes incorrect error
handling in function init_gfs2_fs"
* tag 'gfs2-4.16.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits)
gfs2: Add a few missing newlines in messages
gfs2: Remove inode from ordered write list in gfs2_write_inode()
GFS2: Don't try to end a non-existent transaction in unlink
GFS2: Fix minor comment typo
GFS2: Log the reason for log flushes in every log header
GFS2: Introduce new gfs2_log_header_v2
gfs2: Get rid of gfs2_log_header_in
gfs2: Minor gfs2_page_add_databufs cleanup
gfs2: Add gfs2_max_stuffed_size
gfs2: Typo fixes
gfs2: Implement fallocate(FALLOC_FL_PUNCH_HOLE)
gfs2: Turn trunc_dealloc into punch_hole
gfs2: Generalize truncate code
Turn gfs2_block_truncate_page into gfs2_block_zero_range
gfs2: Improve non-recursive delete algorithm
gfs2: Fix metadata read-ahead during truncate
gfs2: Clean up {lookup,fillup}_metapath
gfs2: Remove minor gfs2_journaled_truncate inefficiencies
gfs2: truncate: Remove unnecessary oldsize parameters
gfs2: Clean up trunc_start error path
...
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The main theme of this pull request is security covering variants 2
and 3 for arm64. I expect to send additional patches next week
covering an improved firmware interface (requires firmware changes)
for variant 2 and way for KPTI to be disabled on unaffected CPUs
(Cavium's ThunderX doesn't work properly with KPTI enabled because of
a hardware erratum).
Summary:
- Security mitigations:
- variant 2: invalidate the branch predictor with a call to
secure firmware
- variant 3: implement KPTI for arm64
- 52-bit physical address support for arm64 (ARMv8.2)
- arm64 support for RAS (firmware first only) and SDEI (software
delegated exception interface; allows firmware to inject a RAS
error into the OS)
- perf support for the ARM DynamIQ Shared Unit PMU
- CPUID and HWCAP bits updated for new floating point multiplication
instructions in ARMv8.4
- remove some virtual memory layout printks during boot
- fix initial page table creation to cope with larger than 32M kernel
images when 16K pages are enabled"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits)
arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm
arm64: Turn on KPTI only on CPUs that need it
arm64: Branch predictor hardening for Cavium ThunderX2
arm64: Run enable method for errata work arounds on late CPUs
arm64: Move BP hardening to check_and_switch_context
arm64: mm: ignore memory above supported physical address size
arm64: kpti: Fix the interaction between ASID switching and software PAN
KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA
KVM: arm64: Handle RAS SErrors from EL2 on guest exit
KVM: arm64: Handle RAS SErrors from EL1 on guest exit
KVM: arm64: Save ESR_EL2 on guest SError
KVM: arm64: Save/Restore guest DISR_EL1
KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2.
KVM: arm/arm64: mask/unmask daif around VHE guests
arm64: kernel: Prepare for a DISR user
arm64: Unconditionally enable IESB on exception entry/return for firmware-first
arm64: kernel: Survive corrected RAS errors notified by SError
arm64: cpufeature: Detect CPU RAS Extentions
arm64: sysreg: Move to use definitions for all the SCTLR bits
arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement frequency/CPU invariance and OPP selection for
SCHED_DEADLINE (Juri Lelli)
- Tweak the task migration logic for better multi-tasking
workload scalability (Mel Gorman)
- Misc cleanups, fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Make bandwidth enforcement scale-invariant
sched/cpufreq: Move arch_scale_{freq,cpu}_capacity() outside of #ifdef CONFIG_SMP
sched/cpufreq: Remove arch_scale_freq_capacity()'s 'sd' parameter
sched/cpufreq: Always consider all CPUs when deciding next freq
sched/cpufreq: Split utilization signals
sched/cpufreq: Change the worker kthread to SCHED_DEADLINE
sched/deadline: Move CPU frequency selection triggering points
sched/cpufreq: Use the DEADLINE utilization signal
sched/deadline: Implement "runtime overrun signal" support
sched/fair: Only immediately migrate tasks due to interrupts if prev and target CPUs share cache
sched/fair: Correct obsolete comment about cpufreq_update_util()
sched/fair: Remove impossible condition from find_idlest_group_cpu()
sched/cpufreq: Don't pass flags to sugov_set_iowait_boost()
sched/cpufreq: Initialize sg_cpu->flags to 0
sched/fair: Consider RT/IRQ pressure in capacity_spare_wake()
sched/fair: Use 'unsigned long' for utilization, consistently
sched/core: Rework and clarify prepare_lock_switch()
sched/fair: Remove unused 'curr' parameter from wakeup_gran
sched/headers: Constify object_is_on_stack()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Clean up the x86 instruction decoder (Masami Hiramatsu)
- Add new uprobes optimization for PUSH instructions on x86 (Yonghong
Song)
- Add MSR_IA32_THERM_STATUS to the MSR events (Stephane Eranian)
- Fix misc bugs, update documentation, plus various cleanups (Jiri
Olsa)
There's a large number of tooling side improvements:
- Intel-PT/BTS improvements (Adrian Hunter)
- Numerous 'perf trace' improvements (Arnaldo Carvalho de Melo)
- Introduce an errno code to string facility (Hendrik Brueckner)
- Various build system improvements (Jiri Olsa)
- Add support for CoreSight trace decoding by making the perf tools
use the external openCSD (Mathieu Poirier, Tor Jeremiassen)
- Add ARM Statistical Profiling Extensions (SPE) support (Kim
Phillips)
- libtraceevent updates (Steven Rostedt)
- Intel vendor event JSON updates (Andi Kleen)
- Introduce 'perf report --mmaps' and 'perf report --tasks' to show
info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo)
- Add infrastructure to record first and last sample time to the
perf.data file header, so that when processing all samples in a
'perf record' session, such as when doing build-id processing, or
when specifically requesting that that info be recorded, use that
in 'perf report --time', that also got support for percent slices
in addition to absolute ones.
I.e. now it is possible to ask for the samples in the 10%-20% time
slice of a perf.data file (Jin Yao)
- Allow system wide 'perf stat --per-thread', sorting the result (Jin
Yao)
E.g.:
[root@jouet ~]# perf stat --per-thread --metrics IPC
^C
Performance counter stats for 'system wide':
make-22229 23,012,094,032 inst_retired.any # 0.8 IPC
cc1-22419 692,027,497 inst_retired.any # 0.8 IPC
gcc-22418 328,231,855 inst_retired.any # 0.9 IPC
cc1-22509 220,853,647 inst_retired.any # 0.8 IPC
gcc-22486 199,874,810 inst_retired.any # 1.0 IPC
as-22466 177,896,365 inst_retired.any # 0.9 IPC
cc1-22465 150,732,374 inst_retired.any # 0.8 IPC
gcc-22508 112,555,593 inst_retired.any # 0.9 IPC
cc1-22487 108,964,079 inst_retired.any # 0.7 IPC
qemu-system-x86-2697 21,330,550 inst_retired.any # 0.3 IPC
systemd-journal-551 20,642,951 inst_retired.any # 0.4 IPC
docker-containe-17651 9,552,892 inst_retired.any # 0.5 IPC
dockerd-current-9809 7,528,586 inst_retired.any # 0.5 IPC
make-22153 12,504,194,380 inst_retired.any # 0.8 IPC
python2-22429 12,081,290,954 inst_retired.any # 0.8 IPC
<SNIP>
python2-22429 15,026,328,103 cpu_clk_unhalted.thread
cc1-22419 826,660,193 cpu_clk_unhalted.thread
gcc-22418 365,321,295 cpu_clk_unhalted.thread
cc1-22509 279,169,362 cpu_clk_unhalted.thread
gcc-22486 210,156,950 cpu_clk_unhalted.thread
<SNIP>
5.638075538 seconds time elapsed
[root@jouet ~]#
- Improve shell auto-completion of perf events (Jin Yao)
- 'perf probe' improvements (Masami Hiramatsu)
- Improve PMU infrastructure to support amp64's ThunderX2
implementation defined core events (Ganapatrao Kulkarni)
- Various annotation related improvements and fixes (Thomas Richter)
- Clarify usage of 'overwrite' and 'backward' in the evlist/mmap
code, removing the 'overwrite' parameter from several functions as
it was always used it as 'false' (Wang Nan)
- Fix/improve 'perf record' reverse recording support (Wang Nan)
- Improve command line options documentation (Sihyeon Jang)
- Optimize sample parsing for ordering events, where we don't need to
parse all the PERF_SAMPLE_ bits, just the ones leading to the
timestamp needed to reorder events (Jiri Olsa)
- Generalize the annotation code to support other source information
besides objdump/DWARF obtained ones, starting with python scripts,
that will is slated to be merged soon (Jiri Olsa)
- ... and a lot more that I failed to list, see the shortlog and
changelog for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (262 commits)
perf trace beauty flock: Move to separate object file
perf evlist: Remove fcntl.h from evlist.h
perf trace beauty futex: Beautify FUTEX_BITSET_MATCH_ANY
perf trace: Do not print from time delta for interrupted syscall lines
perf trace: Add --print-sample
perf bpf: Remove misplaced __maybe_unused attribute
MAINTAINERS: Adding entry for CoreSight trace decoding
perf tools: Add mechanic to synthesise CoreSight trace packets
perf tools: Add full support for CoreSight trace decoding
pert tools: Add queue management functionality
perf tools: Add functionality to communicate with the openCSD decoder
perf tools: Add support for decoding CoreSight trace data
perf tools: Add decoder mechanic to support dumping trace data
perf tools: Add processing of coresight metadata
perf tools: Add initial entry point for decoder CoreSight traces
perf tools: Integrating the CoreSight decoding library
perf vendor events intel: Update IvyTown files to V20
perf vendor events intel: Update IvyBridge files to V20
perf vendor events intel: Update BroadwellDE events to V7
perf vendor events intel: Update SkylakeX events to V1.06
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Implement RDMA nldev netlink interface to get detailed information on each
QP in the system. This includes the owning process or kernel ULP and
detailed information from the qp_attrs.
Currently only the dumpit variant is implemented.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Expose through the netlink interface the global per-device utilization of
the supported object types.
Provide both dumpit and doit callbacks.
As an example of possible output from rdmatool for system with 5
mlx5 cards:
$ rdma res
1: mlx5_0: qp 4 cq 5 pd 3
2: mlx5_1: qp 4 cq 5 pd 3
3: mlx5_2: qp 4 cq 5 pd 3
4: mlx5_3: qp 2 cq 3 pd 2
5: mlx5_4: qp 4 cq 5 pd 3
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- first part of an overhaul of the NuBus subsystem, to bring it up to
modern driver model standards
- a race condition fix for Mac
- defconfig updates
* tag 'm68k-for-v4.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
MAINTAINERS: Add NuBus subsystem entry
m68k/mac: Fix race conditions in OSS interrupt dispatch
nubus: Add support for the driver model
nubus: Add expansion_type values for various Mac models
nubus: Adopt standard linked list implementation
nubus: Rename struct nubus_dev
nubus: Rework /proc/bus/nubus/s/ implementation
nubus: Generalize block resource handling
nubus: Clean up whitespace
nubus: Remove redundant code
nubus: Call proc_mkdir() not more than once per slot directory
nubus: Validate slot resource IDs
nubus: Fix log spam
nubus: Use static functions where possible
nubus: Fix up header split
nubus: Avoid array underflow and overflow
m68k/defconfig: Update defconfigs for v4.15-rc1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
|
|
The flags field the enum is used with comes directly from the uapi
so it belongs in the uapi headers for clarity and so userspace can
use it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The major changes in the core API side in this cycle are the still
on-going ASoC componentization works. Other than that, only few small
changes such as 20bit PCM format support are found.
Meanwhile the rest majority of changes are for ASoC drivers:
- Large cleanups of some of the TI CODEC drivers
- Continued work on Intel ASoC stuff for new quirks, ACPI GPIO
handling, Kconfigs and lots of cleanups
- Refactoring of the Freescale SSI driver, as preliminary work for
the upcoming changes
- Work on ST DFSDM driver, including the required IIO patches
- New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier
EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and
TAS6424 devices
- Removal of dead codes for SN95031 and board drivers
Last but not least, a few HD-audio and USB-audio quirks are included
as usual, too"
* tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (303 commits)
ALSA: hda - Reduce the suspend time consumption for ALC256
ASoC: use seq_file to dump the contents of dai_list,platform_list and codec_list
ASoC: soc-core: add missing EXPORT_SYMBOL_GPL() for snd_soc_rtdcom_lookup
IIO: ADC: stm32-dfsdm: remove unused variable again
ASoC: bcm2835: fix hw_params error when device is in prepared state
ASoC: mxs-sgtl5000: Do not print error on probe deferral
ASoC: sgtl5000: Do not print error on probe deferral
ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMON
ALSA: usb-audio: Support changing input on Sound Blaster E1
ASoC: Intel: remove second duplicated assignment to pointer 'res'
ALSA: hda/realtek - update ALC215 depop optimize
ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289
ALSA: pcm: Fix trailing semicolon
ASoC: add Component level .read/.write
ASoC: cx20442: fix regression by adding back .read/.write
ASoC: uda1380: fix regression by adding back .read/.write
ASoC: tlv320dac33: fix regression by adding back .read/.write
ALSA: hda - Use IS_REACHABLE() for dependency on input
IIO: ADC: stm32-dfsdm: fix static check warning
IIO: ADC: stm32-dfsdm: code optimization
...
|
|
The goal is to let the user follow an interface that moves to another
netns.
CC: Jiri Benc <jbenc@redhat.com>
CC: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) A number of extensions to tcp-bpf, from Lawrence.
- direct R or R/W access to many tcp_sock fields via bpf_sock_ops
- passing up to 3 arguments to bpf_sock_ops functions
- tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks
- optionally calling bpf_sock_ops program when RTO fires
- optionally calling bpf_sock_ops program when packet is retransmitted
- optionally calling bpf_sock_ops program when TCP state changes
- access to tclass and sk_txhash
- new selftest
2) div/mod exception handling, from Daniel.
One of the ugly leftovers from the early eBPF days is that div/mod
operations based on registers have a hard-coded src_reg == 0 test
in the interpreter as well as in JIT code generators that would
return from the BPF program with exit code 0. This was basically
adopted from cBPF interpreter for historical reasons.
There are multiple reasons why this is very suboptimal and prone
to bugs. To name one: the return code mapping for such abnormal
program exit of 0 does not always match with a suitable program
type's exit code mapping. For example, '0' in tc means action 'ok'
where the packet gets passed further up the stack, which is just
undesirable for such cases (e.g. when implementing policy) and
also does not match with other program types.
After considering _four_ different ways to address the problem,
we adapt the same behavior as on some major archs like ARMv8:
X div 0 results in 0, and X mod 0 results in X. aarch64 and
aarch32 ISA do not generate any traps or otherwise aborts
of program execution for unsigned divides.
Given the options, it seems the most suitable from
all of them, also since major archs have similar schemes in
place. Given this is all in the realm of undefined behavior,
we still have the option to adapt if deemed necessary.
3) sockmap sample refactoring, from John.
4) lpm map get_next_key fixes, from Yonghong.
5) test cleanups, from Alexei and Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds support for openvswitch to configure erspan
v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added
to uapi as a binary blob to support all ERSPAN v1 and v2's
fields. Note that Previous commit "openvswitch: Add erspan tunnel
support." was reverted since it does not design properly.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds a new uapi header file, erspan.h, and moves
the 'struct erspan_metadata' from internal erspan.h to it.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds support for calling sock_ops BPF program when there is a TCP state
change. Two arguments are used; one for the old state and another for
the new state.
There is a new enum in include/uapi/linux/bpf.h that exports the TCP
states that prepends BPF_ to the current TCP state names. If it is ever
necessary to change the internal TCP state values (other than adding
more to the end), then it will become necessary to convert from the
internal TCP state value to the BPF value before calling the BPF
sock_ops function. There are a set of compile checks added in tcp.c
to detect if the internal and BPF values differ so we can make the
necessary fixes.
New op: BPF_SOCK_OPS_STATE_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adds support for calling sock_ops BPF program when there is a
retransmission. Three arguments are used; one for the sequence number,
another for the number of segments retransmitted, and the last one for
the return value of tcp_transmit_skb (0 => success).
Does not include syn-ack retransmissions.
New op: BPF_SOCK_OPS_RETRANS_CB.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for reading many more tcp_sock fields
state, same as sk->sk_state
rtt_min same as sk->rtt_min.s[0].v (current rtt_min)
snd_ssthresh
rcv_nxt
snd_nxt
snd_una
mss_cache
ecn_flags
rate_delivered
rate_interval_us
packets_out
retrans_out
total_retrans
segs_in
data_segs_in
segs_out
data_segs_out
lost_out
sacked_out
sk_txhash
bytes_received (__u64)
bytes_acked (__u64)
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adds an optional call to sock_ops BPF program based on whether the
BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags.
The BPF program is passed 2 arguments: icsk_retransmits and whether the
RTO has expired.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary
use is to determine if there should be calls to sock_ops bpf program at
various points in the TCP code. The field is initialized to zero,
disabling the calls. A sock_ops BPF program can set it, per connection and
as necessary, when the connection is established.
It also adds support for reading and writting the field within a
sock_ops BPF program. Reading is done by accessing the field directly.
However, writing is done through the helper function
bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program
is trying to set a callback that is not supported in the current kernel
(i.e. running an older kernel). The helper function returns 0 if it was
able to set all of the bits set in the argument, a positive number
containing the bits that could not be set, or -EINVAL if the socket is
not a full TCP socket.
Examples of where one could call the bpf program:
1) When RTO fires
2) When a packet is retransmitted
3) When the connection terminates
4) When a packet is sent
5) When a packet is received
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adds support for passing up to 4 arguments to sock_ops bpf functions. It
reusues the reply union, so the bpf_sock_ops structures are not
increased in size.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is the per-I/O equivalent of O_APPEND to support atomic append
operations on any open file.
If a file is opened with O_APPEND, pwrite() ignores the offset and
always appends data to the end of the file. RWF_APPEND enables atomic
append and pwrite() with offset on a single file descriptor.
Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Expose the number of times the link has been going UP or DOWN, and
update the "carrier_changes" counter to be the sum of these two events.
While at it, also update the sysfs-class-net documentation to cover:
carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count
(4.16)
Signed-off-by: David Decotigny <decot@googlers.com>
[Florian:
* rebase
* add documentation
* merge carrier_changes with up/down counters]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite")
changed a few values in the uapi headers for MACsec.
Because of existing userspace implementations, we need to preserve the
value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in
wpa_supplicant segfaults when a secure channel was created using the
default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their
original values.
Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is
unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B)
is large enough to carry 32-bytes keys. This patch reverts
MACSEC_MAX_KEY_LEN to 128B and restores the old length check on
MACSEC_SA_ATTR_KEY.
Fixes: ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The UUID change by btrfstune sets SUPER_FLAG_CHANGING_FSID and resets it
only when changing fsid is complete. Its not a good idea to mount the
device anything in between, reading metadata blocks would fail with UUID
mismatch.
This patch doesn't add SUPER_FLAG_CHANGING_FSID into
BTRFS_SUPER_FLAG_SUPP list, so mount will fail (along with the fix in
the next patch) when SUPER_FLAG_CHANGING_FSID is set.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Just a code spatial rearrangement, no functional change.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. Basically, a new extension for ip6tables, simplification work of
nf_tables that saves us 500 LoC, allow raw table registration before
defragmentation, conversion of the SNMP helper to use the ASN.1 code
generator, unique 64-bit handle for all nf_tables objects and fixes to
address fallout from previous nf-next batch. More specifically, they
are:
1) Seven patches to remove family abstraction layer (struct nft_af_info)
in nf_tables, this simplifies our codebase and it saves us 64 bytes per
net namespace.
2) Add IPv6 segment routing header matching for ip6tables, from Ahmed
Abdelsalam.
3) Allow to register iptable_raw table before defragmentation, some
people do not want to waste cycles on defragmenting traffic that is
going to be dropped, hence add a new module parameter to enable this
behaviour in iptables and ip6tables. From Subash Abhinov
Kasiviswanathan. This patch needed a couple of follow up patches to
get things tidy from Arnd Bergmann.
4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several
patches for this helper to prepare this change are also part of this
patch series.
5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha
Sharma.
6) Remove log message that several netfilter subsystems print at
boot/load time.
7) Restore x_tables module autoloading, that got broken in a previous
patch to allow singleton NAT hook callback registration per hook
spot, from Florian Westphal. Moreover, return EBUSY to report that
the singleton NAT hook slot is already in instead.
8) Several fixes for the new nf_tables flowtable representation,
including incorrect error check after nf_tables_flowtable_lookup(),
missing Kconfig dependencies that lead to build breakage and missing
initialization of priority and hooknum in flowtable object.
9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip
target. This is due to recent updates in the core to shrink the hook
array size and compile it out if no specific family is enabled via
.config file. Patch from Florian Westphal.
10) Remove duplicated include header files, from Wei Yongjun.
11) Sparse warning fix for the NFPROTO_INET handling from the core
due to missing static function definition, also from Wei Yongjun.
12) Restore ICMPv6 Parameter Problem error reporting when
defragmentation fails, from Subash Abhinov Kasiviswanathan.
13) Remove obsolete owner field initialization from struct
file_operations, patch from Alexey Dobriyan.
14) Use boolean datatype where needed in the Netfilter codebase, from
Gustavo A. R. Silva.
15) Remove double semicolon in dynset nf_tables expression, from
Luis de Bethencourt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) bpf array map HW offload, from Jakub.
2) support for bpf_get_next_key() for LPM map, from Yonghong.
3) test_verifier now runs loaded programs, from Alexei.
4) xdp cpumap monitoring, from Jesper.
5) variety of tests, cleanups and small x64 JIT optimization, from Daniel.
6) user space can now retrieve HW JITed program, from Jiong.
Note there is a minor conflict between Russell's arm32 JIT fixes
and removal of bpf_jit_enable variable by Daniel which should
be resolved by keeping Russell's comment and removing that variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull KVM fixes from Radim Krčmář:
"ARM:
- fix incorrect huge page mappings on systems using the contiguous
hint for hugetlbfs
- support alternative GICv4 init sequence
- correctly implement the ARM SMCC for HVC and SMC handling
PPC:
- add KVM IOCTL for reporting vulnerability and workaround status
s390:
- provide userspace interface for branch prediction changes in
firmware
x86:
- use correct macros for bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: wire up bpb feature
KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
KVM: arm64: Fix GICv4 init when called from vgic_its_create
KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2
|
|
The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch allows deletion of objects via unique handle which can be
listed via '-a' option.
Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
