summaryrefslogtreecommitdiff
path: root/include/target
AgeCommit message (Collapse)Author
2018-08-02scsi: target: add session removal functionMike Christie
This adds a function to remove a session which should be used by drivers that use target_setup_session. The next patches will convert the target drivers to use this new function. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: target: rename target_alloc_sessionMike Christie
Rename target_alloc_session to target_setup_session to avoid confusion with the other transport session allocation function that only allocates the session and because the target_alloc_session does so much more. It allocates the session, sets up the nacl and registers the session. The next patch will then add a remove function to match the setup in this one, so it should make sense for all drivers, except iscsi, to just call those 2 functions to setup and remove a session. iscsi will continue to be the odd driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: target: make transport_init_session_tags staticMike Christie
transport_init_session_tags is only called from target_core_transport.c so make it static. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-30scsi: target: add helper to check if dev is configuredMike Christie
This just adds a helper function to check if a device is configured and it converts the target users to use it. The next patch will add a backend module user so those types of modules do not have to know the lio core details. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Remove se_dev_entry.ua_countBart Van Assche
se_dev_entry.ua_count is only used to check whether or not se_dev_entry.ua_list is empty. Use list_empty_careful() instead. Checking whether or not ua_list is empty without holding the lock that protects that list is fine because the code that dequeues from that list will check again whether or not that list is empty. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Remove second argument from fabric_make_tpg()Bart Van Assche
Since most target drivers do not use the second fabric_make_tpg() argument ("group") and since it is trivial to derive the group pointer from the wwn pointer, do not pass the group pointer to fabric_make_tpg(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Simplify the code for waiting for command completionBart Van Assche
Instead of embedding the completion that is used for waiting for command completion in struct se_cmd, let the context that waits for command completion allocate it. This makes it possible to have a single code path for non-aborted and aborted commands in target_release_cmd_kref() and avoids that transport_generic_free_cmd() has to call cmd->se_tfo->release_cmd() directly. This patch does not change any functionality. Note: transport_generic_free_cmd() only waits until the se_cmd reference count has reached zero after it has set both CMD_T_FABRIC_STOP and CMD_T_ABORTED. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Make the session shutdown code also wait for commands that are ↵Bart Van Assche
being aborted Target drivers must call target_sess_cmd_list_set_waiting() and target_wait_for_sess_cmds() before freeing a session. Since freeing a session is only safe after all commands that are associated with a session have finished, make target_wait_for_sess_cmds() also wait for commands that are being aborted. Instead of setting a flag in each pending command from target_sess_cmd_list_set_waiting() and waiting in target_wait_for_sess_cmds() on a per-command completion, only set a per-session flag in the former function and wait on a per-session completion in the latter function. This change is safe because once a SCSI initiator system has submitted a command a target system is always allowed to execute it to completion. See also commit 0f4a943168f3 ("target: Fix remote-port TMR ABORT + se_cmd fabric stop"). This patch is based on the following two patches: * Bart Van Assche, target: Simplify session shutdown code, February 19, 2015 (https://github.com/bvanassche/linux/commit/8df5463d7d7619f2f1b70cfe5172eaef0aa52815). * Christoph Hellwig, target: Rework session shutdown code, December 7, 2015 (http://thread.gmane.org/gmane.linux.scsi.target.devel/10695). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Introduce transport_init_session()Bart Van Assche
Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: target: Rename transport_init_session() into transport_alloc_session()Bart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: target: remove target_find_deviceMike Christie
target_find_device is no longer used, so remove it. Signed-off-by: Mike Christie <mchristi@redhat.com> Tested-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: target: Convert target drivers to use sbitmapMatthew Wilcox
The sbitmap and the percpu_ida perform essentially the same task, allocating tags for commands. The sbitmap outperforms the percpu_ida as documented here: https://lkml.org/lkml/2014/4/22/553 The sbitmap interface is a little harder to use, but being able to remove the percpu_ida code and getting better performance justifies the additional complexity. Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> # f_tcm Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: target: Abstract tag freeingMatthew Wilcox
Introduce target_free_tag() and convert all drivers to use it. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-18scsi: target: transport should handle st FM/EOM/ILI readsLee Duncan
When a tape drive is exported via LIO using the pscsi module, a read that requests more bytes per block than the tape can supply returns an empty buffer. This is because the pscsi pass-through target module sees the "ILI" illegal length bit set and thinks there is no reason to return the data. This is a long-standing transport issue, since it assumes that no data need be returned under a check condition, which isn't always the case for tape. Add in a check for tape reads with the ILI, EOM, or FM bits set, with a sense code of NO_SENSE, treating such cases as if the read succeeded. The layered tape driver then "does the right thing" when it gets such a response. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-16target core: add device action configfs filesMike Christie
This patch adds a new group of files that are to be used to have the kernel module execution some action. The next patch will have target_core_user use the group/files to be able to block a device and to reset its memory buffer used to pass commands between user/kernel space. This type of file is different from the existing device attributes in that they may be write only and when written to they result in the kernel module executing some function. These need to be separate from the normal device attributes which get/set device values so userspace can continue to loop over all the attribs and get/set them during initialization. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2018-01-12target: add SAM_STAT_BUSY sense reasonMike Christie
Add SAM_STAT_BUSY sense_reason. The next patch will have target_core_user return this value while it is temporarily blocked and restarting. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series is predominantly bug-fixes, with a few small improvements that have been outstanding over the last release cycle. As usual, the associated bug-fixes have CC' tags for stable. Also, things have been particularly quiet wrt new developments the last months, with most folks continuing to focus on stability atop 4.x stable kernels for their respective production configurations. Also at this point, the stable trees have been synced up with mainline. This will continue to be a priority, as production users tend to run exclusively atop stable kernels, a few releases behind mainline. The highlights include: - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in v4.11+ (tangwenji) - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu) - Add netlink command reply supported option for each device (Kenjiro Nakayama) - cxgbit: Abort the TCP connection in case of data out timeout (Varun Prakash) - Fix PR/ALUA file path truncation (David Disseldorp) - Fix double se_cmd completion during ->cmd_time_out (Mike Christie) - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly + nab) - Fix quiese during transport_write_pending_qf endless loop (nab) - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+ (Don White + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits) tcmu: Add a missing unlock on an error path tcmu: Fix some memory corruption iscsi-target: Fix non-immediate TMR reference leak iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK target: Fix quiese during transport_write_pending_qf endless loop target: Fix caw_sem leak in transport_generic_request_failure target: Fix QUEUE_FULL + SCSI task attribute handling iSCSI-target: Use common error handling code in iscsi_decode_text_input() target/iscsi: Detect conn_cmd_list corruption early target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype target/iscsi: Fix endianness in an error message target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it target/iscsi: Define OFFLOAD_BUF_SIZE once target: Inline transport_put_cmd() target: Suppress gcc 7 fallthrough warnings target: Move a declaration of a global variable into a header file tcmu: fix double se_cmd completion target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES ...
2017-11-14Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-07target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASKNicholas Bellinger
This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-04target: add sense code INSUFFICIENT REGISTRATION RESOURCEStangwenji
If a PERSISTENT RESERVE OUT command with a REGISTER service action or a REGISTER AND IGNORE EXISTING KEY service action or REGISTER AND MOVE service action is attempted, but there are insufficient device server resources to complete the operation, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST,and the additonal sense code set to INSUFFICIENT REGISTRATION RESOURCES. Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19target: make config_item_type constBhumika Goyal
Make these structures const as they are either passed to the functions having the argument as const or stored as a reference in the "ci_type" const field of a config_item structure. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-08-06iscsi-target: Fix iscsi_np reset hung task during parallel deleteNicholas Bellinger
This patch fixes a bug associated with iscsit_reset_np_thread() that can occur during parallel configfs rmdir of a single iscsi_np used across multiple iscsi-target instances, that would result in hung task(s) similar to below where configfs rmdir process context was blocked indefinately waiting for iscsi_np->np_restart_comp to finish: [ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds. [ 6726.119440] Tainted: G W O 4.1.26-3321 #2 [ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88 0 15550 1 0x00000000 [ 6726.140058] ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08 [ 6726.147593] ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0 [ 6726.155132] ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8 [ 6726.162667] Call Trace: [ 6726.165150] [<ffffffff8168ced2>] schedule+0x32/0x80 [ 6726.170156] [<ffffffff8168f5b4>] schedule_timeout+0x214/0x290 [ 6726.176030] [<ffffffff810caef2>] ? __send_signal+0x52/0x4a0 [ 6726.181728] [<ffffffff8168d7d6>] wait_for_completion+0x96/0x100 [ 6726.187774] [<ffffffff810e7c80>] ? wake_up_state+0x10/0x10 [ 6726.193395] [<ffffffffa035d6e2>] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod] [ 6726.201278] [<ffffffffa0355d86>] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod] [ 6726.210033] [<ffffffffa0363f7f>] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod] [ 6726.218351] [<ffffffff81260c5a>] configfs_write_file+0xaa/0x110 [ 6726.224392] [<ffffffff811ea364>] vfs_write+0xa4/0x1b0 [ 6726.229576] [<ffffffff811eb111>] SyS_write+0x41/0xb0 [ 6726.234659] [<ffffffff8169042e>] system_call_fastpath+0x12/0x71 It would happen because each iscsit_reset_np_thread() sets state to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting for completion on iscsi_np->np_restart_comp. However, if iscsi_np was active processing a login request and more than a single iscsit_reset_np_thread() caller to the same iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np kthread process context in __iscsi_target_login_thread() would flush pending signals and only perform a single completion of np->np_restart_comp before going back to sleep within transport specific iscsit_transport->iscsi_accept_np code. To address this bug, add a iscsi_np->np_reset_count and update __iscsi_target_login_thread() to keep completing np->np_restart_comp until ->np_reset_count has reached zero. Reported-by: Gary Guo <ghg@datera.io> Tested-by: Gary Guo <ghg@datera.io> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-11iscsi-target: Add login_keys_workaround attribute for non RFC initiatorsNicholas Bellinger
This patch re-introduces part of a long standing login workaround that was recently dropped by: commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Apr 2 13:36:44 2017 -0700 iscsi-target: Drop work-around for legacy GlobalSAN initiator Namely, the workaround for FirstBurstLength ended up being required by Mellanox Flexboot PXE boot ROMs as reported by Robert. So this patch re-adds the work-around for FirstBurstLength within iscsi_check_proposer_for_optional_reply(), and makes the key optional to respond when the initiator does not propose, nor respond to it. Also as requested by Arun, this patch introduces a new TPG attribute named 'login_keys_workaround' that controls the use of both the FirstBurstLength workaround, as well as the two other existing workarounds for gPXE iSCSI boot client. By default, the workaround is enabled with login_keys_workaround=1, since Mellanox FlexBoot requires it, and Arun has verified the Qlogic MSFT initiator already proposes FirstBurstLength, so it's uneffected by this re-adding this part of the original work-around. Reported-by: Robert LeBlanc <robert@leblancnet.us> Cc: Robert LeBlanc <robert@leblancnet.us> Reviewed-by: Arun Easi <arun.easi@cavium.com> Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: remove transport_completeMike Christie
transport_complete is no longer used, so drop the code. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: add helper to copy sense to se_cmd bufferMike Christie
This adds a helper to copy sense from backend module buffer to the se_cmd's sense buffer. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: remove g_device_listMike Christie
g_device_list is no longer needed because we now use the idr code for lookups and seaches. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: add helper to find se_device by dev_indexMike Christie
This adds a helper to find a se_device by dev_index. It will be used in the next patches so tcmu's netlink interface can execute commands on specific devices. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: use idr for se_device dev indexMike Christie
In the next patches we will add tcmu netlink support that allows userspace to send commands to target_core_user. To execute operations on a se_device/tcmu_dev we need to be able to look up a dev by any old id. This patch replaces the se_device->dev_index with a idr created id. The next patches will also remove the g_device_list and replace it with the idr. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: break up free_device callbackMike Christie
With this patch free_device is now used to free what is allocated in the alloc_device callback and destroy_device tears down the resources that are setup in the configure_device callback. This patch will be needed in the next patch where tcmu needs to be able to look up the device in the destroy callback. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: Introduce a function that shows the command stateBart Van Assche
Introduce target_show_cmd() and use it where appropriate. If transport_wait_for_tasks() takes too long, make it show the state of the command it is waiting for. (Add missing brackets around multi-line conditions - nab) Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06iscsi-target: Kill left-over iscsi_target_do_cleanupNicholas Bellinger
With commit 25cdda95fda7 in place to address the initial login PDU asynchronous socket close OOPs, go ahead and kill off the left-over iscsi_target_do_cleanup() and ->login_cleanup_work. Reported-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: Use {get,put}_unaligned_be*() instead of open coding these functionsBart Van Assche
Introduce the function get_unaligned_be24(). Use {get,put}_unaligned_be*() where appropriate. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: Remove se_device.dev_listBart Van Assche
The last user of se_device.dev_list was removed through commit 0fd97ccf45be ("target: kill struct se_subsystem_dev"). Hence also remove se_device.dev_list. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: Add TARGET_SCF_LOOKUP_LUN_FROM_TAG support for ABORT_TASKNicholas Bellinger
This patch introduces support in target_submit_tmr() for locating a unpacked_lun from an existing se_cmd->tag during ABORT_TASK. When TARGET_SCF_LOOKUP_LUN_FROM_TAG is set, target_submit_tmr() will do the extra lookup via target_lookup_lun_from_tag() and subsequently invoke transport_lookup_tmr_lun() so a proper percpu se_lun->lun_ref is taken before workqueue dispatch into se_device->tmr_wq happens. Aside from the extra target_lookup_lun_from_tag(), the existing code-path remains unchanged. Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Quinn Tran <quinn.tran@cavium.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-06-08target/configfs: Kill se_lun->lun_link_magicNicholas Bellinger
Instead of using a hardcoded magic value in se_lun when verifying a target config_item symlink source during target_fabric_mappedlun_link(), go ahead and use target_fabric_port_item_ops directly instead. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-06-08target/configfs: Kill se_device->dev_link_magicNicholas Bellinger
Instead of using a hardcoded magic value in se_device when verifying a target config_item symlink source during target_fabric_port_link(), go ahead and use target_core_dev_item_ops directly instead. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-31iscsi-target: Fix initial login PDU asynchronous socket close OOPsNicholas Bellinger
This patch fixes a OOPs originally introduced by: commit bb048357dad6d604520c91586334c9c230366a14 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Thu Sep 5 14:54:04 2013 -0700 iscsi-target: Add sk->sk_state_change to cleanup after TCP failure which would trigger a NULL pointer dereference when a TCP connection was closed asynchronously via iscsi_target_sk_state_change(), but only when the initial PDU processing in iscsi_target_do_login() from iscsi_np process context was blocked waiting for backend I/O to complete. To address this issue, this patch makes the following changes. First, it introduces some common helper functions used for checking socket closing state, checking login_flags, and atomically checking socket closing state + setting login_flags. Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP connection has dropped via iscsi_target_sk_state_change(), but the initial PDU processing within iscsi_target_do_login() in iscsi_np context is still running. For this case, it sets LOGIN_FLAGS_CLOSED, but doesn't invoke schedule_delayed_work(). The original NULL pointer dereference case reported by MNC is now handled by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before transitioning to FFP to determine when the socket has already closed, or iscsi_target_start_negotiation() if the login needs to exchange more PDUs (eg: iscsi_target_do_login returned 0) but the socket has closed. For both of these cases, the cleanup up of remaining connection resources will occur in iscsi_target_start_negotiation() from iscsi_np process context once the failure is detected. Finally, to handle to case where iscsi_target_sk_state_change() is called after the initial PDU procesing is complete, it now invokes conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once existing iscsi_target_sk_check_close() checks detect connection failure. For this case, the cleanup of remaining connection resources will occur in iscsi_target_do_login_rx() from delayed workqueue process context once the failure is detected. Reported-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Tested-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Reported-by: Hannes Reinecke <hare@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Varun Prakash <varun@chelsio.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01target/user: PGR SupportBryant G. Ly
This adds initial PGR support for just TCMU, since tcmu doesn't have the necessary IT_NEXUS info to process PGR in userspace, so have those commands be processed in kernel. HA support is not available yet, we will work on it if this patch is acceptable. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-01tcm: make pi data verification configurableDmitry Monakhov
Currently ramdisk and fileio always perform PI verification before and after backend IO. This approach is not very flexible. Because some one may want to postpone this work to other layers in IO stack. For example if we want to test blk_integrity_profile testcase: https://github.com/dmonakhov/xfstests/commit/dee408c868861d6b6871dbb3381facee7effdbe4 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30target: Fix ALUA transition state race between multiple initiatorsMike Christie
Multiple threads could be writing to alua_access_state at the same time, or there could be multiple STPGs in flight (different initiators sending them or one initiator sending them to different ports), or a combo of both and the core_alua_do_transition_tg_pt calls will race with each other. Because from the last patches we no longer delay running core_alua_do_transition_tg_pt_work, there does not seem to be any point in running that in a workqueue. And, we always wait for it to complete one way or another, so we can sleep in this code path. So, this patch made over target-pending just adds a mutex and does the work core_alua_do_transition_tg_pt_work was doing in core_alua_do_transition_tg_pt. There is also no need to use an atomic for the tg_pt_gp_alua_access_state. In core_alua_do_transition_tg_pt we will test and set it under the transition mutex. And, it is a int/32 bits so in the other places where it is read, we will never see it partially updated. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30target: Fix unknown fabric callback queue-full errorsNicholas Bellinger
This patch fixes a set of queue-full response handling bugs, where outgoing responses are leaked when a fabric driver is propagating non -EAGAIN or -ENOMEM errors to target-core. It introduces TRANSPORT_COMPLETE_QF_ERR state used to signal when CHECK_CONDITION status should be generated, when fabric driver ->write_pending(), ->queue_data_in(), or ->queue_status() callbacks fail with non -EAGAIN or -ENOMEM errors, and data-transfer should not be retried. Note all fabric driver -EAGAIN and -ENOMEM errors are still retried indefinately with associated data-transfer callbacks, following existing queue-full logic. Also fix two missing ->queue_status() queue-full cases related to CMD_T_ABORTED w/ TAS status handling. Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Cc: Potnuri Bharat Teja <bharat@chelsio.com> Reported-by: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30target: Avoid mappedlun symlink creation during lun shutdownNicholas Bellinger
This patch closes a race between se_lun deletion during configfs unlink in target_fabric_port_unlink() -> core_dev_del_lun() -> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks waiting for percpu_ref RCU grace period to finish, but a new NodeACL mappedlun is added before the RCU grace period has completed. This can happen in target_fabric_mappedlun_link() because it only checks for se_lun->lun_se_dev, which is not cleared until after transport_clear_lun_ref() percpu_ref RCU grace period finishes. This bug originally manifested as NULL pointer dereference OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on v4.1.y code, because it dereferences lun->lun_se_dev without a explicit NULL pointer check. In post v4.1 code with target-core RCU conversion, the code in target_stat_scsi_att_intr_port_show_attr_dev() no longer uses se_lun->lun_se_dev, but the same race still exists. To address the bug, go ahead and set se_lun>lun_shutdown as early as possible in core_tpg_remove_lun(), and ensure new NodeACL mappedlun creation in target_fabric_mappedlun_link() fails during se_lun shutdown. Reported-by: James Shen <jcs@datera.io> Cc: James Shen <jcs@datera.io> Tested-by: James Shen <jcs@datera.io> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix ALUA transition timeout handlingMike Christie
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow ALUA setup for some passthrough backendsMike Christie
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-03sched/headers: Remove <linux/cgroup-defs.h> from <linux/sched.h>Ingo Molnar
It's not used by anything in <linux/sched.h> anymore. This reduces the preprocessed size of <linux/sched.h> and speeds up the build a bit. Also fix code that implicitly relied on headers included by <linux/cgroup-defs.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - enable dual mode (initiator + target) qla2xxx operation. (Quinn + Himanshu) - add a framework for qla2xxx async fabric discovery. (Quinn + Himanshu) - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun) - fix target-core handling of aborted failed commands. (Bart) - fix a long standing target-core issue NULL pointer dereference with active I/O LUN shutdown. (Rob Millner + Bryant + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) target: Add counters for ABORT_TASK success + failure iscsi-target: Fix early login failure statistics misses target: Fix NULL dereference during LUN lookup + active I/O shutdown target: Delete tmr from list before processing target: Fix handling of aborted failed commands uapi: fix linux/target_core_user.h userspace compilation errors target: export protocol identifier qla2xxx: Fix a warning reported by the "smatch" static checker target/iscsi: Fix unsolicited data seq_end_offset calculation target/cxgbit: add T6 iSCSI DDP completion feature target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order target/cxgbit: Use T6 specific macros to get ETH/IP hdr len target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx target/iscsi: split iscsit_check_dataout_hdr() target: Remove command flag CMD_T_DEV_ACTIVE target: Remove command flag CMD_T_BUSY target: Move session check from target_put_sess_cmd() into target_release_cmd_kref() target: Inline transport_cmd_check_stop() target: Remove an overly chatty debug message target: Stop execution if CMD_T_STOP has been set ...
2017-03-02sched/headers: Prepare to remove spurious <linux/sched.h> inclusion dependenciesIngo Molnar
In the following patches we are going to remove various headers from sched.h and other headers that sched.h includes. To make those patches build cleanly prepare the scene by adding dependencies to various files that learned to rely on those to-be-removed dependencies. These changes all make sense standalone: they add a header for a data type that a particular .c or .h file is using. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-26target: Add counters for ABORT_TASK success + failureNicholas Bellinger
This patch introduces two counters for ABORT_TASK success + failure under: /sys/kernel/config/target/core/$HBA/$DEV/statistics/scsi_tgt_dev/ that are useful for diagnosing various backend device latency and front fabric issues. Normally when folks see alot of aborts_complete happening, it means the backend device I/O completion latency is high, and not returning completions fast enough before host side timeouts trigger. And normally when folks see alot of aborts_no_task, it means completions are being posted by target-core into fabric driver code, but the responses aren't making it back to the host. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>