summaryrefslogtreecommitdiff
path: root/include/soc
AgeCommit message (Collapse)Author
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-04Merge tag 'arm-drivers-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM/SoC driver updates from Arnd Bergmann: "These are updates to SoC specific drivers that did not have another subsystem maintainer tree to go through for some reason: - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC that is getting added through the MIPS tree. - There are new soc_device identification drivers for TI K3, Qualcomm MSM8939 - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and Hisilicon hi6220 - The SCMI firmware interface can now work across ARM SMC/HVC as a transport. - Mediatek platforms now use a new driver for their "MMSYS" hardware block that controls clocks and some other aspects in behalf of the media and gpu drivers. - Some Tegra processors have improved power management support, including getting woken up by the PMIC and cluster power down during idle. - A new v4l staging driver for Tegra is added. - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and Tegra" * tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits) clk: sprd: fix compile-testing bus: bt1-axi: Build the driver into the kernel bus: bt1-apb: Build the driver into the kernel bus: bt1-axi: Use sysfs_streq instead of strncmp bus: bt1-axi: Optimize the return points in the driver bus: bt1-apb: Use sysfs_streq instead of strncmp bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method bus: bt1-apb: Fix show/store callback identations bus: bt1-apb: Include linux/io.h dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding memory: Add Baikal-T1 L2-cache Control Block driver bus: Add Baikal-T1 APB-bus driver bus: Add Baikal-T1 AXI-bus driver dt-bindings: bus: Add Baikal-T1 APB-bus binding dt-bindings: bus: Add Baikal-T1 AXI-bus binding staging: tegra-video: fix V4L2 dependency tee: fix crypto select drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static soc: ti: add k3 platforms chipid module driver dt-bindings: soc: ti: add binding for k3 platforms chipid module ...
2020-06-04Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...
2020-05-28Merge tag 'soc-fsl-next-v5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.8 DPAA2 DPIO driver - Prefer the CPU affined DPIO QUICC Engine drivers - Replace one-element array and use struct_size() helper Cleanups in various drivers * tag 'soc-fsl-next-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: Remove unused inline function qbman_write_eqcr_am_rt_register soc: fsl: qe: clean up an indentation issue soc: fsl: dpio: Prefer the CPU affine DPIO soc: fsl: qbman: Remove unused inline function qm_eqcr_get_ci_stashing soc: fsl: qe: Replace one-element array and use struct_size() helper treewide: Replace zero-length array with flexible-array Link: https://lore.kernel.org/r/20200527215740.9279-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26Merge tag 'imx-soc-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc i.MX SoC changes for 5.8: - Add soc device support for Vybrid/VF platform. - Move the i.MX soc device registration code from mach-imx to drivers/soc/imx for possible future consolidation with i.MX8 code. - A small fixup to make pcm970_sja1000_platform_data static. * tag 'imx-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static ARM: vf610: report soc info via soc device Link: https://lore.kernel.org/r/20200523032516.11016-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25Merge tag 'qcom-drivers-for-5.8' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.8 This contains a large set of cleanups, bug fixes, general improvements and documentation fixes for the RPMH driver. It adds a debugfs mechanism for inspecting Command DB. Socinfo got the "soc_id" attribute defines and definitions for a various variants of MSM8939. RPMH, RPMPD and RPMHPD where made possible to build as modules, but RPMH had to be reverted due to a compilation issue when tracing is enabled. RPMHPD gained power-domains for the SM8250 voltage corners. The SCM driver gained fixes for two build warnings and the SMP2P had an unnecessary error print removed. * tag 'qcom-drivers-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (42 commits) Revert "soc: qcom: rpmh: Allow RPMH driver to be loaded as a module" soc: qcom: rpmh-rsc: Remove the pm_lock soc: qcom: rpmh-rsc: Simplify locking by eliminating the per-TCS lock kernel/cpu_pm: Fix uninitted local in cpu_pm soc: qcom: rpmh-rsc: We aren't notified of our own failure w/ NOTIFY_BAD soc: qcom: rpmh-rsc: Correctly ignore CPU_CLUSTER_PM notifications firmware: qcom_scm-legacy: Replace zero-length array with flexible-array soc: qcom: rpmh-rsc: Timeout after 1 second in write_tcs_reg_sync() soc: qcom: rpmh-rsc: Factor "tcs_reg_addr" and "tcs_cmd_addr" calculation soc: qcom: socinfo: add msm8936/39 and apq8036/39 soc ids soc: qcom: aoss: Add SM8250 compatible soc: qcom: pdr: Remove impossible error condition soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner soc: qcom: rpmhpd: Add SM8250 power domains firmware: qcom_scm: fix bogous abuse of dma-direct internals dt-bindings: soc: qcom: apr: Use generic node names for APR services firmware: qcom_scm: Remove unneeded conversion to bool soc: qcom: cmd-db: Properly endian swap the slv_id for debugfs soc: qcom: cmd-db: Use 5 digits for printing address soc: qcom: cmd-db: Cast sizeof() to int to silence field width warning ... Link: https://lore.kernel.org/r/20200519052533.1250024-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-22soc: fsl: qe: Replace one-element array and use struct_size() helperGustavo A. R. Silva
The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. So, replace the one-element array with a flexible-array member. Also, make use of the new struct_size() helper to properly calculate the size of struct qe_firmware. This issue was found with the help of Coccinelle and, audited and fixed _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-05-20ARM: imx: move cpu definitions into a headerPeng Fan
The soc device register code will be moved to drivers/soc/imx/, the code needs the cpu type definitions. So let's move the cpu type definitions to a header. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-13firmware: raspberrypi: Introduce vl805 init routineNicolas Saenz Julienne
The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that implements xHCI. After a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. RPi4's VideoCore OS contains both the non public firmware load logic and the VL805 firmware blob. The function this patch introduces triggers the aforementioned process. Link: https://lore.kernel.org/r/20200505161318.26200-3-nsaenzjulienne@suse.de Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-05-13soc: bcm2835: Add notify xHCI reset propertyNicolas Saenz Julienne
The property is needed in order to trigger VL805's firmware load. Note that gap between the property introduced and the previous one is due to the properties not being defined. Link: https://lore.kernel.org/r/20200505161318.26200-2-nsaenzjulienne@suse.de Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: dsa: ocelot: the MAC table on Felix is twice as largeVladimir Oltean
When running 'bridge fdb dump' on Felix, sometimes learnt and static MAC addresses would appear, sometimes they wouldn't. Turns out, the MAC table has 4096 entries on VSC7514 (Ocelot) and 8192 entries on VSC9959 (Felix), so the existing code from the Ocelot common library only dumped half of Felix's MAC table. They are both organized as a 4-way set-associative TCAM, so we just need a single variable indicating the correct number of rows. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found after restarting my randconfig build testing that had been dormant for a while. On the Nokia N950/N9 phone, a DT fix is required to address a boot regression. For the bcm283x (Raspberry Pi), two DT fixes address minor issues" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: imx8: select SOC_BUS soc: tegra: fix tegra_pmc_get_suspend_mode definition soc: fsl: dpio: avoid stack usage warning soc: fsl: dpio: fix incorrect pointer conversions ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: bcm283x: Disable dsi0 node firmware: xilinx: make firmware_debugfs_root static drivers: soc: xilinx: fix firmware driver Kconfig dependency ARM: dts: bcm283x: Add cells encoding format to firmware bus ARM: dts: OMAP3: disable RNG on N950/N9
2020-04-21net: mscc: ocelot: support 4 PTP programmable pinsYangbo Lu
Support 4 PTP programmable pins with only PTP_PF_PEROUT function for now. The PTP_PF_EXTTS function will be supported in the future, and it should be implemented separately for Felix and Ocelot, because of different hardware interrupt implementation in them. Since the hardware is not able to support absolute start time, the periodic clock request only allows start time 0 0. But nsec could be accepted for PPS case for phase adjustment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21net: mscc: ocelot: add wave programming registers definitionsYangbo Lu
Add wave programming registers definitions for Ocelot platforms. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21net: mscc: ocelot: redefine PTP pinsYangbo Lu
There are 5 PTP_PINS register groups on Ocelot switch. Except the one used for TOD operations, there are still 4 register groups for programmable pins. So redefine the 4 programmable pins. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-21net: mscc: ocelot: move ocelot ptp clock code out of ocelot.cYangbo Lu
The Ocelot PTP clock driver had been embedded into ocelot.c driver. It had supported basic gettime64/settime64/adjtime/adjfine functions by now which were used by both Ocelot switch and Felix switch. This patch is to move current ptp clock code out of ocelot.c driver maintaining as a single ocelot_ptp.c. For futher new features implementation, the common code could be put in ocelot_ptp.c and the switch specific code should be in specific switch driver. The interrupt implementation in SoC is different between Ocelot and Felix. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-17soc: tegra: fix tegra_pmc_get_suspend_mode definitionArnd Bergmann
When CONFIG_PM_SLEEP is disabled, the function is not defined, causing a link failure: arm-linux-gnueabi-ld: drivers/cpuidle/cpuidle-tegra.o: in function `tegra_cpuidle_probe': cpuidle-tegra.c:(.text+0x24): undefined reference to `tegra_pmc_get_suspend_mode' Change the #ifdef check according to the definition. Fixes: 382ac8e22b90 ("cpuidle: tegra: Disable CC6 state if LP2 unavailable") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-04-15net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridgeVladimir Oltean
To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-13soc: qcom: cmd-db: Fix compilation error when CMD_DB is disabledSibi Sankar
If CONFIG_QCOM_COMMAND_DB=n the following compilation errors will be seen. Fix this by including the appropriate linux headers. ./include/soc/qcom/cmd-db.h: In function ‘cmd_db_read_aux_data’: ./include/soc/qcom/cmd-db.h: error: implicit declaration of function ‘ERR_PTR’; Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200227125615.4727-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-04-03Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-04-03Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC updates from Arnd Bergmann: "The code changes are mostly for 32-bit platforms and include: - Lots of updates for the Nvidia Tegra platform, including cpuidle, pmc, and dt-binding changes - Microchip at91 power management updates for the recently added sam9x60 SoC - Treewide setup_irq deprecation by afzal mohammed - STMicroelectronics stm32 gains earlycon support - Renesas platforms with Cortex-A9 can now use the global timer - Some TI OMAP2+ platforms gain cpuidle support - Various cleanups for the i.MX6 and Orion platforms, as well as Kconfig files across all platforms" * tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits) ARM: qcom: Add support for IPQ40xx ARM: mmp: replace setup_irq() by request_irq() ARM: cns3xxx: replace setup_irq() by request_irq() ARM: spear: replace setup_irq() by request_irq() ARM: ep93xx: Replace setup_irq() by request_irq() ARM: iop32x: replace setup_irq() by request_irq() arm: mach-dove: Mark dove_io_desc as __maybe_unused ARM: orion: replace setup_irq() by request_irq() ARM: debug: stm32: add UART early console support for STM32MP1 ARM: debug: stm32: add UART early console support for STM32H7 ARM: debug: stm32: add UART early console configuration for STM32F7 ARM: debug: stm32: add UART early console configuration for STM32F4 cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ...
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-03-30net: dsa: felix: add port policersVladimir Oltean
This patch is a trivial passthrough towards the ocelot library, which support port policers since commit 2c1d029a017f ("net: mscc: ocelot: Implement port policers via tc command"). Some data structure conversion between the DSA core and the Ocelot library is necessary, for policer parameters. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-30net: mscc: ocelot: add action of police on vcap_is2Xiaoliang Yang
Ocelot has 384 policers that can be allocated to ingress ports, QoS classes per port, and VCAP IS2 entries. ocelot_police.c supports to set policers which can be allocated to police action of VCAP IS2. We allocate policers from maximum pol_id, and decrease the pol_id when add a new vcap_is2 entry which is police action. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27net: dsa: felix: support changing the MTUVladimir Oltean
Changing the MTU for this switch means altering the DEV_GMII:MAC_CFG_STATUS:MAC_MAXLEN_CFG field MAX_LEN, which in turn limits the size of frames that can be received. Special accounting needs to be done for the DSA CPU port (NPI port in hardware terms). The NPI port configuration needs to be held inside the private ocelot structure, since it is now accessed from multiple places. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27Merge tag 'soc-fsl-next-v5.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers NXP/FSL SoC driver updates for v5.7 DPAA2 DPIO driver performance optimization - Add and use QMAN multiple enqueue interface - Use function pointer indirection to replace checks in hotpath QUICC Engine drivers - Fix sparse warnings and exposed endian issues * tag 'soc-fsl-next-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: fsl: dpio: fix dereference of pointer p before null check soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue soc: fsl: dpio: QMAN performance improvement with function pointer indirection soc: fsl: dpio: Adding QMAN multiple enqueue interface Link: https://lore.kernel.org/r/20200326001257.22696-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-cpuidle' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc cpuidle: tegra: Changes for v5.7-rc1 These changes unify CPU idle support for Tegra20, Tegra30 and Tegra114. * tag 'tegra-for-5.7-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: cpuidle: tegra: Disable CC6 state if LP2 unavailable cpuidle: tegra: Squash Tegra114 driver into the common driver cpuidle: tegra: Squash Tegra30 driver into the common driver cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle Link: https://lore.kernel.org/r/20200313165848.2915133-9-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tegra-for-5.7-arm-core' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc ARM: tegra: Core changes for v5.7-rc1 These patches a preparatory work to move the CPU idle drivers into drivers/cpuidle. * tag 'tegra-for-5.7-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: cpuidle: Remove unnecessary memory barrier ARM: tegra: cpuidle: Make abort_flag atomic ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2 ARM: tegra: Make outer_disable() open-coded ARM: tegra: Rename some of the newly exposed PM functions ARM: tegra: Expose PM functions required for new cpuidle driver ARM: tegra: Propagate error from tegra_idle_lp2_last() ARM: tegra: Change tegra_set_cpu_in_lp2() type to void ARM: tegra: Remove pen-locking from cpuidle-tegra20 ARM: tegra: Add tegra_pm_park_secondary_cpu() ARM: tegra: Compile sleep-tegra20/30.S unconditionally Link: https://lore.kernel.org/r/20200313165848.2915133-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-24soc: fsl: qe: fix sparse warnings for ucc_slow.cLi Yang
Fixes the following sparse warnings, some of these endian issues are real issues that need to be fixed. drivers/soc/fsl/qe/ucc_slow.c:78:17: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:78:17: expected struct ucc_slow *us_regs drivers/soc/fsl/qe/ucc_slow.c:78:17: got struct ucc_slow [noderef] <asn:2> *us_regs drivers/soc/fsl/qe/ucc_slow.c:81:18: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:81:18: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:81:18: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:90:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:90:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:90:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:99:17: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:99:17: expected struct ucc_slow *us_regs drivers/soc/fsl/qe/ucc_slow.c:99:17: got struct ucc_slow [noderef] <asn:2> *us_regs drivers/soc/fsl/qe/ucc_slow.c:102:18: warning: incorrect type in argument 1 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:102:18: expected void const volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:102:18: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:111:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:111:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:111:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:172:28: warning: Using plain integer as NULL pointer drivers/soc/fsl/qe/ucc_slow.c:174:25: warning: cast removes address space '<asn:2>' of expression drivers/soc/fsl/qe/ucc_slow.c:175:25: warning: cast removes address space '<asn:2>' of expression drivers/soc/fsl/qe/ucc_slow.c:194:23: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:194:23: expected struct ucc_slow_pram *us_pram drivers/soc/fsl/qe/ucc_slow.c:194:23: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:204:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:204:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:204:9: got restricted __be16 * drivers/soc/fsl/qe/ucc_slow.c:229:41: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:229:41: expected struct qe_bd *tx_bd drivers/soc/fsl/qe/ucc_slow.c:229:41: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:232:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:232:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:232:17: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:234:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:234:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:234:17: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:238:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:238:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:238:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/ucc_slow.c:239:9: expected unsigned int [usertype] val drivers/soc/fsl/qe/ucc_slow.c:239:9: got restricted __be32 [usertype] drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:239:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:239:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:239:9: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:242:26: warning: incorrect type in assignment (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:242:26: expected struct qe_bd *rx_bd drivers/soc/fsl/qe/ucc_slow.c:242:26: got void [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_slow.c:245:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:245:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:245:17: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:247:17: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:247:17: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:247:17: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 1 (different base types) drivers/soc/fsl/qe/ucc_slow.c:251:9: expected unsigned int [usertype] val drivers/soc/fsl/qe/ucc_slow.c:251:9: got restricted __be32 [usertype] drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: cast from restricted __be32 drivers/soc/fsl/qe/ucc_slow.c:251:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:251:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:251:9: got unsigned int [usertype] * drivers/soc/fsl/qe/ucc_slow.c:252:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:252:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:252:9: got restricted __be32 * drivers/soc/fsl/qe/ucc_slow.c:276:39: warning: mixing different enum types: drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_tx_oversampling_rate drivers/soc/fsl/qe/ucc_slow.c:276:39: unsigned int enum ucc_slow_rx_oversampling_rate drivers/soc/fsl/qe/ucc_slow.c:296:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:296:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:296:9: got restricted __be16 * drivers/soc/fsl/qe/ucc_slow.c:297:9: warning: incorrect type in argument 2 (different address spaces) drivers/soc/fsl/qe/ucc_slow.c:297:9: expected void volatile [noderef] <asn:2> *addr drivers/soc/fsl/qe/ucc_slow.c:297:9: got restricted __be16 * Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-03-24soc: fsl: qe: fix sparse warnings for ucc_fast.cLi Yang
Fixes the following sparse warnings: drivers/soc/fsl/qe/ucc_fast.c:218:22: warning: incorrect type in assignment (different base types) drivers/soc/fsl/qe/ucc_fast.c:218:22: expected unsigned int [noderef] [usertype] <asn:2> *p_ucce drivers/soc/fsl/qe/ucc_fast.c:218:22: got restricted __be32 [noderef] <asn:2> * drivers/soc/fsl/qe/ucc_fast.c:219:22: warning: incorrect type in assignment (different base types) drivers/soc/fsl/qe/ucc_fast.c:219:22: expected unsigned int [noderef] [usertype] <asn:2> *p_uccm drivers/soc/fsl/qe/ucc_fast.c:219:22: got restricted __be32 [noderef] <asn:2> * Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
2020-03-13cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidleDmitry Osipenko
The driver's code is refactored in a way that will make it easy to support Tegra30/114/124 SoCs by this unified driver later on. The current functionality is equal to the old Tegra20 driver, only the code's structure changed a tad. This is also a proper platform driver now. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: Rename some of the newly exposed PM functionsDmitry Osipenko
Rename some of the recently exposed PM functions, prefixing them with "tegra_pm_" in order to make the naming of the PM functions consistent. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13ARM: tegra: Expose PM functions required for new cpuidle driverDmitry Osipenko
The upcoming unified CPUIDLE driver will be added to the drivers/cpuidle/ directory and it will require all these exposed Tegra PM-core functions. Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Jasper Korten <jja2000@gmail.com> Tested-by: David Heidelberg <david@ixit.cz> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: fixup missing include rename] Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-13soc/tegra: pmc: Add pins for Tegra194Venkat Reddy Talla
Extend the Tegra194 IO pad table with additional information such as pin names and 1.8/3.3 V settings to allow a table of voltage control pins to generated from it. This is similar to what's done for older chips and is needed to support high-speed modes for SDHCI where switching the pins to 1.8V or 3.3V is necessary. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11soc/tegra: bpmp: Update ABI headerVidya Sagar
Update the firmware header to support uninitialization of UPHY PLL when the PCIe controller is operating in endpoint mode and host cuts the PCIe reference clock. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2020-03-09net: mscc: ocelot: properly account for VLAN header length when setting MRUVladimir Oltean
What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net: dsa: felix: Allow unknown unicast traffic towards the CPU port moduleVladimir Oltean
Compared to other DSA switches, in the Ocelot cores, the RX filtering is a much more important concern. Firstly, the primary use case for Ocelot is non-DSA, so there isn't any secondary Ethernet MAC [the DSA master's one] to implicitly drop frames having a DMAC we are not interested in. So the switch driver itself needs to install FDB entries towards the CPU port module (PGID_CPU) for the MAC address of each switch port, in each VLAN installed on the port. Every address that is not whitelisted is implicitly dropped. This is in order to achieve a behavior similar to N standalone net devices. Secondly, even in the secondary use case of DSA, such as illustrated by Felix with the NPI port mode, that secondary Ethernet MAC is present, but its RX filter is bypassed. This is because the DSA tags themselves are placed before Ethernet, so the DMAC that the switch ports see is not seen by the DSA master too (since it's shifter to the right). So RX filtering is pretty important. A good RX filter won't bother the CPU in case the switch port receives a frame that it's not interested in, and there exists no other line of defense. Ocelot is pretty strict when it comes to RX filtering: non-IP multicast and broadcast traffic is allowed to go to the CPU port module, but unknown unicast isn't. This means that traffic reception for any other MAC addresses than the ones configured on each switch port net device won't work. This includes use cases such as macvlan or bridging with a non-Ocelot (so-called "foreign") interface. But this seems to be fine for the scenarios that the Linux system embedded inside an Ocelot switch is intended for - it is simply not interested in unknown unicast traffic, as explained in Allan Nielsen's presentation [0]. On the other hand, the Felix DSA switch is integrated in more general-purpose Linux systems, so it can't afford to drop that sort of traffic in hardware, even if it will end up doing so later, in software. Actually, unknown unicast means more for Felix than it does for Ocelot. Felix doesn't attempt to perform the whitelisting of switch port MAC addresses towards PGID_CPU at all, mainly because it is too complicated to be feasible: while the MAC addresses are unique in Ocelot, by default in DSA all ports are equal and inherited from the DSA master. This adds into account the question of reference counting MAC addresses (delayed ocelot_mact_forget), not to mention reference counting for the VLAN IDs that those MAC addresses are installed in. This reference counting should be done in the DSA core, and the fact that it wasn't needed so far is due to the fact that the other DSA switches don't have the DSA tag placed before Ethernet, so the DSA master is able to whitelist the MAC addresses in hardware. So this means that even regular traffic termination on a Felix switch port happens through flooding (because neither Felix nor Ocelot learn source MAC addresses from CPU-injected frames). So far we've explained that whitelisting towards PGID_CPU: - helps to reduce the likelihood of spamming the CPU with frames it won't process very far anyway - is implemented in the ocelot driver - is sufficient for the ocelot use cases - is not feasible in DSA - breaks use cases in DSA, in the current status (whitelisting enabled but no MAC address whitelisted) So the proposed patch allows unknown unicast frames to be sent to the CPU port module. This is done for the Felix DSA driver only, as Ocelot seems to be happy without it. [0]: https://www.youtube.com/watch?v=B1HhxEcU7Jg Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net: mscc: ocelot: eliminate confusion between CPU and NPI portVladimir Oltean
Ocelot has the concept of a CPU port. The CPU port is represented in the forwarding and the queueing system, but it is not a physical device. The CPU port can either be accessed via register-based injection/extraction (which is the case of Ocelot), via Frame-DMA (similar to the first one), or "connected" to a physical Ethernet port (called NPI in the datasheet) which is the case of the Felix DSA switch. In Ocelot the CPU port is at index 11. In Felix the CPU port is at index 6. The CPU bit is treated special in the forwarding, as it is never cleared from the forwarding port mask (once added to it). Other than that, it is treated the same as a normal front port. Both Felix and Ocelot should use the CPU port in the same way. This means that Felix should not use the NPI port directly when forwarding to the CPU, but instead use the CPU port. This patch is fixing this such that Felix will use port 6 as its CPU port, and just use the NPI port to carry the traffic. Therefore, eliminate the "ocelot->cpu" variable which was holding the index of the NPI port for Felix, and the index of the CPU port module for Ocelot, so the variable was actually configuring different things for different drivers and causing at least part of the confusion. Also remove the "ocelot->num_cpu_ports" variable, which is the result of another confusion. The 2 CPU ports mentioned in the datasheet are because there are two frame extraction channels (register based or DMA based). This is of no relevance to the driver at the moment, and invisible to the analyzer module. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: dsa: felix: Wire up the ocelot cls_flower methodsVladimir Oltean
Export the cls_flower methods from the ocelot driver and hook them up to the DSA passthrough layer. Tables for the VCAP IS2 parameters, as well as half key packing (field offsets and lengths) need to be defined for the VSC9959 core, as they are different from Ocelot, mainly due to the different port count. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: mscc: ocelot: parameterize the vcap_is2 propertiesVladimir Oltean
Remove the definitions for the VCAP IS2 table from ocelot_ace.c, since it is specific to VSC7514. The VSC9959 VCAP IS2 table supports more rules (1024 instead of 64) and has a different width for the action (89 bits instead of 99). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: mscc: ocelot: remove port_pcs_init indirection for VSC7514Vladimir Oltean
The Felix driver is now using its own PHYLINK instance, not calling into ocelot_adjust_link. So the port_pcs_init function pointer is an unnecessary indirection. Remove it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: mscc: ocelot: don't rely on preprocessor for vcap key/action packingVladimir Oltean
The IGR_PORT_MASK key width is different between the 11-port VSC7514 and the 6-port VSC9959 switches. And since IGR_PORT_MASK is one of the first fields of a VCAP key entry, it means that all further field offset/length pairs are shifted between the 2. The ocelot driver performs packing of VCAP half keys with the help of some preprocessor macros: - A set of macros for defining the HKO (Half Key Offset) and HKL (Half Key Length) of each possible key field. The offset of each field is defined as the sum between the offset and the sum of the previous field. - A set of accessors on top of vcap_key_set for shorter (aka less typing) access to the HKO and HKL of each key field. Since the field offsets and lengths are different between switches, defining them through the preprocessor isn't going to fly. So introduce a structure holding (offset, length) pairs and instantiate it in ocelot_board.c for VSC7514. In a future patch, a similar structure will be instantiated in felix_vsc9959.c for NXP LS1028A. The accessors also need to go. They are based on macro name concatenation, which is horrible to understand and follow. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net: mscc: ocelot: simplify tc-flower offload structuresVladimir Oltean
The ocelot tc-flower offload binds a second flow block callback (apart from the one for matchall) just because it uses a different block private structure (ocelot_port_private for matchall, ocelot_port_block for flower). But ocelot_port_block just appears to be boilerplate, and doesn't help with anything in particular at all, it's just useless glue between the (global!) struct ocelot_acl_block *block pointer, and a per-netdevice struct ocelot_port_private *priv. So let's just simplify that, and make struct ocelot_port_private be the private structure for the block offload. This makes us able to use the same flow callback as in the case of matchall. This also reveals that the struct ocelot_acl_block *block is used rather strangely, as mentioned above: it is defined globally, allocated at probe time, and freed at unbind time. So just move the structure to the main ocelot structure, which gives further opportunity for simplification. Also get rid of backpointers from struct ocelot_acl_block and struct ocelot_ace_rule back to struct ocelot, by reworking the function prototypes, where necessary, to use a more DSA-friendly "struct ocelot *ocelot, int port" format. And finally, remove the debugging prints that were added during development, since they provide no useful information at this point. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19soc: fsl: dpio: Adding QMAN multiple enqueue interfaceYouri Querry
Update of QMAN the interface to enqueue frame. We now support multiple enqueue (qbman_swp_enqueue_multiple) and multiple enqueue with a table of descriptor (qbman_swp_enqueue_multiple_desc). Signed-off-by: Youri Querry <youri.querry_1@nxp.com> Acked-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2020-02-11drivers: qcom: rpmh: remove rpmh_flush exportMaulik Shah
rpmh_flush() was exported with the idea that an external entity operation during CPU idle would know when to flush the sleep and wake TCS. Since, this is not the case when defining a power domain for the RSC. Remove the function export and instead allow the function to be called internally. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1580736940-6985-3-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 22:24:10 +0000