| Age | Commit message (Collapse) | Author |
|---|
|
Once in_dev_get is called to receive in_device pointer, the
in_device reference counter is increased, but if there are
no ipv4 addresses configured on the net-device the ifa_list
will be null, resulting in a flow that doesn't call in_dev_put
to decrease the ref_cnt.
This was exposed when running RoCE over ipv6 without any ipv4
addresses configured
Fixes: commit 8e3867310c90 ("IB/cma: Fix a race condition in iboe_addr_get_sgid()")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause
overflow due to the fact that the input to the function usecs_to_jiffies
is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is
equal to or greater than 30. The consequence is unnecessarily excessive
retry and thus degradation of the system performance.
This patch fixes the problem by limiting the input to 5-bit and calling
usecs_to_jiffies() before multiplying the scaling factor.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There are no users for IB_QP_CREATE_USE_GFP_NOIO flag,
so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.
The patch removes the gfp flags argument and updates all driver paths.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds new function ib_modify_qp_with_udata so that
uverbs layer can avoid handling L2 mac address at verbs layer
and depend on the core layer to resolve the mac address consistently
for all required QPs.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma update from Doug Ledford:
"This includes two bugs against the newly added opa vnic that were
found by turning on the debug kernel options:
- sleeping while holding a lock, so a one line fix where they
switched it from GFP_KERNEL allocation to a GFP_ATOMIC allocation
- a case where they had an isolated caller of their code that could
call them in an atomic context so they had to switch their use of a
mutex to a spinlock to be safe, so this was considerably more lines
of diff because all uses of that lock had to be switched
In addition, the bug that was discussed with you already about an out
of bounds array access in ib_uverbs_modify_qp and ib_uverbs_create_ah
and is only seven lines of diff.
And finally, one fix to an earlier fix in the -rc cycle that broke
hfi1 and qib in regards to IPoIB (this one is, unfortunately, larger
than I would like for a -rc7 submission, but fixing the problem
required that we not treat all devices as though they had allocated a
netdev universally because it isn't true, and it took 70 lines of diff
to resolve the issue, but the final patch has been vetted by Intel and
Mellanox and they've both given their approval to the fix).
Summary:
- Two fixes for OPA found by debug kernel
- Fix for user supplied input causing kernel problems
- Fix for the IPoIB fixes submitted around -rc4"
[ Doug sent this having not noticed the 4.12 release, so I guess I'll be
getting another rdma pull request with the actuakl merge window
updates and not just fixes.
Oh well - it would have been nice if this small update had been the
merge window one. - Linus ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/core, opa_vnic, hfi1, mlx5: Properly free rdma_netdev
RDMA/uverbs: Check port number supplied by user verbs cmds
IB/opa_vnic: Use spinlock instead of mutex for stats_lock
IB/opa_vnic: Use GFP_ATOMIC while sending trap
|
|
IPOIB is calling free_rdma_netdev even though alloc_rdma_netdev has
returned -EOPNOTSUPP.
Move free_rdma_netdev from ib_device structure to rdma_netdev structure
thus ensuring proper cleanup function is called for the rdma net device.
Fix the following trace:
ib0: Failed to modify QP to ERROR state
BUG: unable to handle kernel paging request at 0000000000001d20
IP: hfi1_vnic_free_rn+0x26/0xb0 [hfi1]
Call Trace:
ipoib_remove_one+0xbe/0x160 [ib_ipoib]
ib_unregister_device+0xd0/0x170 [ib_core]
rvt_unregister_device+0x29/0x90 [rdmavt]
hfi1_unregister_ib_device+0x1a/0x100 [hfi1]
remove_one+0x4b/0x220 [hfi1]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0x141/0x200
driver_detach+0x3f/0x80
bus_remove_driver+0x55/0xd0
driver_unregister+0x2c/0x50
pci_unregister_driver+0x2a/0xa0
hfi1_mod_cleanup+0x10/0xf65 [hfi1]
SyS_delete_module+0x171/0x250
do_syscall_64+0x67/0x150
entry_SYSCALL64_slow_path+0x25/0x25
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
|
|
Commit 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB and
ROCE specific fields) moved the service_id to be specific attribute
for IB and OPA SA Path Record, and thus wasn't assigned for RoCE.
This caused to the following kernel panic in the CMA request handler flow:
[ 27.074594] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 27.074731] IP: __radix_tree_lookup+0x1d/0xe0
...
[ 27.075356] Workqueue: ib_cm cm_work_handler [ib_cm]
[ 27.075401] task: ffff88022e3b8000 task.stack: ffffc90001298000
[ 27.075449] RIP: 0010:__radix_tree_lookup+0x1d/0xe0
...
[ 27.075979] Call Trace:
[ 27.076015] radix_tree_lookup+0xd/0x10
[ 27.076055] cma_ps_find+0x59/0x70 [rdma_cm]
[ 27.076097] cma_id_from_event+0xd2/0x470 [rdma_cm]
[ 27.076144] ? ib_init_ah_from_path+0x39a/0x590 [ib_core]
[ 27.076193] cma_req_handler+0x25/0x480 [rdma_cm]
[ 27.076237] cm_process_work+0x25/0x120 [ib_cm]
[ 27.076280] ? cm_get_bth_pkey.isra.62+0x3c/0xa0 [ib_cm]
[ 27.076350] cm_req_handler+0xb03/0xd40 [ib_cm]
[ 27.076430] ? sched_clock_cpu+0x11/0xb0
[ 27.076478] cm_work_handler+0x194/0x1588 [ib_cm]
[ 27.076525] process_one_work+0x160/0x410
[ 27.076565] worker_thread+0x137/0x4a0
[ 27.076614] kthread+0x112/0x150
[ 27.076684] ? max_active_store+0x60/0x60
[ 27.077642] ? kthread_park+0x90/0x90
[ 27.078530] ret_from_fork+0x2c/0x40
This patch moves it back to the common SA Path Record structure
and removes the redundant setter and getter.
Tested on Connect-IB and Connect-X4 in Infiniband and RoCE respectively.
Fixes: 9fdca4da4d8c (IB/SA: Split struct sa_path_rec based on IB ands
ROCE specific fields)
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
RDMA netlink is part of ib_core, hence ibnl_chk_listeners(),
ibnl_init() and ibnl_cleanup() don't need to be published
in public header file.
Let's remove EXPORT_SYMBOL from ibnl_chk_listeners() and move all these
functions to private header file.
CC: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Allocate and free a security context when creating and destroying a MAD
agent. This context is used for controlling access to PKeys and sending
and receiving SMPs.
When sending or receiving a MAD check that the agent has permission to
access the PKey for the Subnet Prefix of the port.
During MAD and snoop agent registration for SMI QPs check that the
calling process has permission to access the manage the subnet and
register a callback with the LSM to be notified of policy changes. When
notificaiton of a policy change occurs recheck permission and set a flag
indicating sending and receiving SMPs is allowed.
When sending and receiving MADs check that the agent has access to the
SMI if it's on an SMI QP. Because security policy can change it's
possible permission was allowed when creating the agent, but no longer
is.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: remove the LSM hook init code]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add new LSM hooks to allocate and free security contexts and check for
permission to access a PKey.
Allocate and free a security context when creating and destroying a QP.
This context is used for controlling access to PKeys.
When a request is made to modify a QP that changes the port, PKey index,
or alternate path, check that the QP has permission for the PKey in the
PKey table index on the subnet prefix of the port. If the QP is shared
make sure all handles to the QP also have access.
Store which port and PKey index a QP is using. After the reset to init
transition the user can modify the port, PKey index and alternate path
independently. So port and PKey settings changes can be a merge of the
previous settings and the new ones.
In order to maintain access control if there are PKey table or subnet
prefix change keep a list of all QPs are using each PKey index on
each port. If a change occurs all QPs using that device and port must
have access enforced for the new cache settings.
These changes add a transaction to the QP modify process. Association
with the old port and PKey index must be maintained if the modify fails,
and must be removed if it succeeds. Association with the new port and
PKey index must be established prior to the modify and removed if the
modify fails.
1. When a QP is modified to a particular Port, PKey index or alternate
path insert that QP into the appropriate lists.
2. Check permission to access the new settings.
3. If step 2 grants access attempt to modify the QP.
4a. If steps 2 and 3 succeed remove any prior associations.
4b. If ether fails remove the new setting associations.
If a PKey table or subnet prefix changes walk the list of QPs and
check that they have permission. If not send the QP to the error state
and raise a fatal error event. If it's a shared QP make sure all the
QPs that share the real_qp have permission as well. If the QP that
owns a security structure is denied access the security structure is
marked as such and the QP is added to an error_list. Once the moving
the QP to error is complete the security structure mark is cleared.
Maintaining the lists correctly turns QP destroy into a transaction.
The hardware driver for the device frees the ib_qp structure, so while
the destroy is in progress the ib_qp pointer in the ib_qp_security
struct is undefined. When the destroy process begins the ib_qp_security
structure is marked as destroying. This prevents any action from being
taken on the QP pointer. After the QP is destroyed successfully it
could still listed on an error_list wait for it to be processed by that
flow before cleaning up the structure.
If the destroy fails the QPs port and PKey settings are reinserted into
the appropriate lists, the destroying flag is cleared, and access control
is enforced, in case there were any cache changes during the destroy
flow.
To keep the security changes isolated a new file is used to hold security
related functionality.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: merge fixup in ib_verbs.h and uverbs_cmd.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Cache the subnet prefix and add a function to access it. Enforcing
security requires frequent queries of the subnet prefix and the pkeys in
the pkey table.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch prepares the uapi export by fixing the following error:
.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
#include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"As mentioned in my first pull request, this is the subsequent pull
requests I had. This is all I have, and in fact this cleans out the
RDMA subsystem's entire patchworks queue of kernel changes that are
ready to go (well, it did for the weekend anyway, a few new patches
are in, but they'll be coming during the -rc cycle).
The first tag contains a single patch that would have conflicted if
taken from my tree or DaveM's tree as it needed our trees merged to
come cleanly.
The second tag contains the patch series from Intel plus three other
stragllers that came in late last week. I took them because it allowed
me to legitimately claim that the RDMA patchworks queue was, for a
short time, 100% cleared of all waiting kernel patches, woohoo! :-).
I have it under my for-next tag, so it did get 0day and linux- next
over the end of last week, and linux-next did show one minor conflict.
Summary:
'for-linus' tag:
- mlx5/IPoIB fixup patch
'for-next' tag:
- the hfi1 15 patch set that landed late
- IPoIB get_link_ksettings which landed late because I asked for a
respin
- one late rxe change
- one -rc worthy fix that's in early"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx5: Enable IPoIB acceleration
* tag 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
rxe: expose num_possible_cpus() cnum_comp_vectors
IB/rxe: Update caller's CRC for RXE_MEM_TYPE_DMA memory type
IB/hfi1: Clean up on context initialization failure
IB/hfi1: Fix an assign/ordering issue with shared context IDs
IB/hfi1: Clean up context initialization
IB/hfi1: Correctly clear the pkey
IB/hfi1: Search shared contexts on the opened device, not all devices
IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bit
IB/hfi1: Use filedata rather than filepointer
IB/hfi1: Name function prototype parameters
IB/hfi1: Fix a subcontext memory leak
IB/hfi1: Return an error on memory allocation failure
IB/hfi1: Adjust default eager_buffer_size to 8MB
IB/hfi1: Get rid of divide when setting the tx request header
IB/hfi1: Fix yield logic in send engine
IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line
IB/hfi1: Fix checks for Offline transient state
IB/ipoib: add get_link_ksettings in ethtool
|
|
This field is causing excessive cache line bouncing.
There are spare bytes in the r_lock cache line so the best approach
is to make an rvt QP field and remove from the hfi1 priv field.
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"More exchaustive description of primary updates in this release:
- Lots of driver fixes and misc fixes across the board.
- I had to base on a net-next tree because the IPoIB Accelorator
patches needed it.
Unfortunately, it was known to Mellanox that there would need to be
an IPoIB accelorator patch to the net tree (which left some
functions turned off by an #ifdef construct to avoid warnings about
defined but unused functions), then one to the RDMA tree, then a
fixup that went back and re-enabled the functions in the net tree
and enabled their use in the rdma tree
Also, a sparse fix was sent to the net tree after I did my pull,
and the fixup patch conflicts quite directly with that sparse fix,
so I'm going to submit the fixup patch towards the end of the merge
window by itself and based upon your master branch at the time.
- Two separate rounds of hfi1 fixes, one that got dropped from last
release because it came in just a day or two before the end of the
merge window and then the one from this release cycle.
Of note is that I now have a third series that just landed from
Intel yesterday. It is not included in this pull request, but I may
submit it by the end of the week. I'll talk to Intel about
improving the timing of thier submissions for my workflow.
- Changes to our idr usage in the RDMA subsystem that will tie into
our cgroup management and also into the upcoming changes for the
RDMA kernel<->userspace API.
- Addition of support for a netdev to be tied to an RDMA device at
the core level
- Addition of the VNIC driver from Intel.
While IPoIB provides IP over InfiniBand (and *only* IP, no lower
layer protocol headers are allowed or supported), the VNIC driver
presents a virtual Ethernet device with support for things like
varying Ethertypes, VLANs, priorities and other features of
Ethernet.
The virtual devices are centrally managed by the OPA fabric
manager, making this (for the time being) a strictly OPA specific
feature.
- Improvements to the On-Demand Paging support in the RDMA subsystem.
- Addition of three significant OPA changes.
While we added OPA support some time ago (via the hfi1 driver), the
RDMA subsystem has so far glossed over the areas where OPA and
InfiniBand differ.
With this release we are starting to add support for the OPA
extensions into the RDMA core in the following area: Extended port
information for OPA is now supported, extended Address Handle
attributes for OPA are now supported, and extended SA Queries to
get OPA specific subnet information is now supported.
Concise summary from the tag:
- idr usage and locking changes
- build fix for hns
- ipoib debug path record file fix
- hfi1 updates
- core RDMA netdev addition
- Intel VNIC driver addition
- Enhanced accelerators for IPoIB addition
- Debug cleanups in cxgb3/4
- Trivial cleanups from SF Markus Elfring
- Misc rxe fixes from Mellanox
- Misc ipoib fixes from Mellanox
- Lots of mlx4/mlx5 changes from Mellanox
- Misc fixes across the RDMA subsystem
- ODP paging fixes and improvements
- qedr updates
- hfi1 updates
- OPA port info patches
- OPA AH patches
- OPA SA Query patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (191 commits)
infiniband: avoid dereferencing uninitialized dst on error path
IB/SA: Add OPA addr header
IB/mlx5: Add port_xmit_wait to counter registers read
IB/ocrdma: fix out of bounds access to local buffer
IB/mlx4: Fix incorrect order of formal and actual parameters
IB/mlx4: Change flush logic so it adheres to the variable name
mlx5: Fix mlx5_ib_map_mr_sg mr length
IB/rxe: Don't clamp residual length to mtu
IB/SA: Add support to query OPA path records
IB/SA: Add OPA path record type
IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields
IB/SA: Introduce path record specific types
IB/SA: Rename ib_sa_path_rec to sa_path_rec
IB/CM: Add braces when using sizeof
IB/core: Define 'opa' rdma_ah_attr type
IB/core: Define 'ib' and 'roce' rdma_ah_attr types
IB/core: Use rdma_ah_attr accessor functions
IB/core: Add accessor functions for rdma_ah_attr fields
IB/PVRDMA: Rename ib_ah_attr related functions
IB/mthca: Rename to_ib_ah_attr to to_rdma_ah_attr
...
|
|
When importing the patch 57520751445b (IB/SA: Add OPA path record type),
a new header file should have been added to the repo as part of the
patch. However, as the patch didn't apply cleanly using git am, I
instead used patch manually, and followed that up with git add -u, which
misses new files. This adds the new file back in.
Fixes: 57520751445b (IB/SA: Add OPA path record type)
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add opa_sa_path_rec to sa_path_rec data structure.
The 'type' field in sa_path_rec identifies the
type of the path record.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
struct sa_path_rec has a gid_type field. This patch introduces a more
generic path record specific type 'rec_type' which is either IB, ROCE v1
or ROCE v2. The patch also provides conversion functions to get
a gid type from a path record type and vice versa
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
OPA ah_attr types allows core components to specify
attributes that may be specific to opa devices.
For instance, opa type ah_attr provides 32 bit lids
enabling larger OPA fabric sizes.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
These accessor functions are supposed to be used to get
and set individual fields of struct rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_query_ah to rdma_query_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_modify_ah to rdma_modify_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Rename ib_create_ah to rdma_create_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For OPA devices, SA will query the OPA classport info
instead of the IB defined classport info.
opa classport info exposes additional information and
capabilities that are specific to OPA devices.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port info and would need this definition. Move it to ib_mad.h
for everyone to use.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
rdma_cap_opa_ah(..) enables core components to check if the
corresponding port supports OPA extended addressing.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Move FECN and BECN related defines to common header files
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
These inline functions improve code readability by
enabling callers to read specific fields from the
header without knowledge of byte offsets.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The Infiniband spec defines "A multicast address is defined by a
MGID and a MLID" (section 10.5).
The current code only uses the MGID for identifying multicast groups.
Update the driver to be compliant with this definition.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add IB_ACCESS_HUGETLB ib_reg_mr flag.
Hugetlb region registered with this flag
will use single translation entry per huge page.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currenlty ODP supports only regular MMU pages.
Add ODP support for regions consisting of physically contiguous chunks
of arbitrary order (huge pages for instance) to improve performance.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Size of pages are held by struct ib_umem in page_size field.
It is better to store it as an exponent, because page size by nature
is always power-of-two and used as a factor, divisor or ilog2's argument.
The conversion of page_size to be page_shift allows to have portable
code and avoid following error while compiling on ARM:
ERROR: "__aeabi_uldivmod" [drivers/infiniband/core/ib_core.ko] undefined!
CC: Selvin Xavier <selvin.xavier@broadcom.com>
CC: Steve Wise <swise@chelsio.com>
CC: Lijun Ou <oulijun@huawei.com>
CC: Shiraz Saleem <shiraz.saleem@intel.com>
CC: Adit Ranadive <aditr@vmware.com>
CC: Dennis Dalessandro <dennis.dalessandro@intel.com>
CC: Ram Amrani <Ram.Amrani@Cavium.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The function ib_unregister_mad_agent always returns zero. And
this returned value is not checked. As such, chane the return
type to void.
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add high data rate speed to the ib_port_speed enumeration.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This flow steering specification identifies flow for drop by the HW.
If user create a flow only with the drop specification,
then all the packets that hit this flow will be dropped, otherwise the HW
will drop only the packets that match the other L2/L3/L4 specifications.
Signed-off-by: Slava Shwartsman <slavash@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add RDMA netdev interface to ib device structure allowing RDMA
netdev devices to be allocated by ib clients.
The idea is to allow to providers to optimize IPoIB data path.
New struct that includes functions and data member is exposed.
It exposes set of callback functions for handling data path flows
in IPoIB driver.
Each provider can support these set of functions in order
to optimize its specific data path, and let IPoIB to leverage
its data path.
There is an assumption, that providers should give the full set
of functions and not only part of them, in order to work properly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
HFI1 HW specific support for VNIC functionality.
Dynamically allocate a set of contexts for VNIC when the first vnic
port is instantiated. Allocate VNIC contexts from user contexts pool
and return them back to the same pool while freeing up. Set aside
enough MSI-X interrupts for VNIC contexts and assign them when the
contexts are allocated. On the receive side, use an RSM rule to
spread TCP/UDP streams among VNIC contexts.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Define OPA VNIC interface between hardware independent VNIC
functionality and the hardware dependent VNIC functionality.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add rdma netdev interface to ib device structure allowing rdma netdev
devices to be allocated by ib clients.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
|
We rename the "write" flags to "exclusive", as it's used for both
WRITE and DESTROY actions.
Fixes: 3832125624b7 ('IB/core: Add support for idr types')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
