summaryrefslogtreecommitdiff
path: root/include/rdma
AgeCommit message (Collapse)Author
2018-04-06Merge tag 'for-linus-unmerged' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma updates from Jason Gunthorpe: "Doug and I are at a conference next week so if another PR is sent I expect it to only be bug fixes. Parav noted yesterday that there are some fringe case behavior changes in his work that he would like to fix, and I see that Intel has a number of rc looking patches for HFI1 they posted yesterday. Parav is again the biggest contributor by patch count with his ongoing work to enable container support in the RDMA stack, followed by Leon doing syzkaller inspired cleanups, though most of the actual fixing went to RC. There is one uncomfortable series here fixing the user ABI to actually work as intended in 32 bit mode. There are lots of notes in the commit messages, but the basic summary is we don't think there is an actual 32 bit kernel user of drivers/infiniband for several good reasons. However we are seeing people want to use a 32 bit user space with 64 bit kernel, which didn't completely work today. So in fixing it we required a 32 bit rxe user to upgrade their userspace. rxe users are still already quite rare and we think a 32 bit one is non-existing. - Fix RDMA uapi headers to actually compile in userspace and be more complete - Three shared with netdev pull requests from Mellanox: * 7 patches, mostly to net with 1 IB related one at the back). This series addresses an IRQ performance issue (patch 1), cleanups related to the fix for the IRQ performance problem (patches 2-6), and then extends the fragmented completion queue support that already exists in the net side of the driver to the ib side of the driver (patch 7). * Mostly IB, with 5 patches to net that are needed to support the remaining 10 patches to the IB subsystem. This series extends the current 'representor' framework when the mlx5 driver is in switchdev mode from being a netdev only construct to being a netdev/IB dev construct. The IB dev is limited to raw Eth queue pairs only, but by having an IB dev of this type attached to the representor for a switchdev port, it enables DPDK to work on the switchdev device. * All net related, but needed as infrastructure for the rdma driver - Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers - SRP performance updates - IB uverbs write path cleanup patch series from Leon - Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to set the port for ib_srpt to listen on in configfs in order for it to be enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port) - TSO and Scatter FCS support in mlx4 - Refactor of modify_qp routine to resolve problems seen while working on new code that is forthcoming - More refactoring and updates of RDMA CM for containers support from Parav - mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory' user API features - Infrastructure updates for the new IOCTL interface, based on increased usage - ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit kernel as was originally intended. See the commit messages for extensive details - Syzkaller bugs and code cleanups motivated by them" * tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits) IB/rxe: Fix for oops in rxe_register_device on ppc64le arch IB/mlx5: Device memory mr registration support net/mlx5: Mkey creation command adjustments IB/mlx5: Device memory support in mlx5_ib net/mlx5: Query device memory capabilities IB/uverbs: Add device memory registration ioctl support IB/uverbs: Add alloc/free dm uverbs ioctl support IB/uverbs: Add device memory capabilities reporting IB/uverbs: Expose device memory capabilities to user RDMA/qedr: Fix wmb usage in qedr IB/rxe: Removed GID add/del dummy routines RDMA/qedr: Zero stack memory before copying to user space IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR IB/mlx5: Add information for querying IPsec capabilities IB/mlx5: Add IPsec support for egress and ingress {net,IB}/mlx5: Add ipsec helper IB/mlx5: Add modify_flow_action_esp verb IB/mlx5: Add implementation for create and destroy action_xfrm IB/uverbs: Introduce ESP steering match filter IB/uverbs: Add modify ESP flow_action ...
2018-04-05IB/uverbs: Add device memory registration ioctl supportAriel Levkovich
Adding new ioctl method for the MR object - REG_DM_MR. This command can be used by users to register an allocated device memory buffer as an MR and receive lkey and rkey to be used within work requests. It is added as a new method under the MR object and using a new ib_device callback - reg_dm_mr. The command creates a standard ib_mr object which represents the registered memory. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-05IB/uverbs: Add alloc/free dm uverbs ioctl supportAriel Levkovich
This change adds uverbs support for allocation/freeing of device memory commands. A new uverbs object is defined of type idr to represent and track the new resource type allocation per context. The API requires provider driver to implement 2 new ib_device callbacks - one for allocation and one for deallocation which return and accept (respectively) the ib_dm object which represents the allocated memory on the device. The support is added via the ioctl command infrastructure only. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-05IB/uverbs: Add device memory capabilities reportingAriel Levkovich
This change allows vendors to report device memory capability max_dm_size - to user via uverbs command. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Introduce ESP steering match filterMatan Barak
Adding a new ESP steering match filter that could match against spi and seq used in IPSec protocol. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Add modify ESP flow_actionMatan Barak
flow_actions of ESP type could be modified during runtime. This could be common for example when ESN should be changed. Adding a new UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an existing ESP flow_action. The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS should be changed. In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that could be used when one wants to disable a replay protection over a specific flow_action. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Introduce egress flow steeringBoris Pismenny
The egress flag indicates that this flow steering rule is for egress traffic. The scope of an egress rule is port-wide, meaning all packets originated from that port, which match the steering rule specification will be effected by this steering rule's action. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Add action_handle flow steering specificationMatan Barak
Binding a flow_action to flow steering rule requires using a new specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow specification. Flow steering rules could use flow_action(s) and as of that we need to avoid deleting flow_action(s) as long as they're being used. Moreover, when the attached rules are deleted, action_handle reference count should be decremented. Introducing a new mechanism of flow resources to keep track on the attached action_handle(s). Later on, this mechanism should be extended to other attached flow steering resources like flow counters. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Add flow_action create and destroy verbsMatan Barak
A verbs application may receive and transmits packets using a data path pipeline. Sometimes, the first stage in the receive pipeline or the last stage in the transmit pipeline involves transforming a packet, either in order to make it easier for later stages to process it or to prepare it for transmission over the wire. Such transformation could be stripping/encapsulating the packet (i.e. vxlan), decrypting/encrypting it (i.e. ipsec), altering headers, doing some complex FPGA changes, etc. Some hardware could do such transformations without software data path intervention at all. The flow steering API supports steering a packet (either to a QP or dropping it) and some simple packet immutable actions (i.e. tagging a packet). Complex actions, that may change the packet, could bloat the flow steering API extensively. Sometimes the same action should be applied to several flows. In this case, it's easier to bind several flows to the same action and modify it than change all matching flows. Introducing a new flow_action object that abstracts any packet transformation (out of a standard and well defined set of actions). This flow_action object could be tied to a flow steering rule via a new specification. Currently, we support esp flow_action, which encrypts or decrypts a packet according to the given parameters. However, we present a flexible schema that could be used to other transformation actions tied to flow rules. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-04IB/uverbs: Add enum attribute type to ioctl() interfaceMatan Barak
Methods sometimes need to get one attribute out of a group of pre-defined attributes. This is an enum-like behavior. Since this is a common requirement, we add a new ENUM attribute to the generic uverbs ioctl() layer. This attribute is embedded in methods, like any other attributes we currently have. ENUM attributes point to an array of standard UVERBS_ATTR_PTR_IN. The user-space encodes the enum's attribute id in the id field and the internal PTR_IN attr id in the enum_data.elem_id field. This ENUM attribute could be shared by several attributes and it can get UVERBS_ATTR_SPEC_F_MANDATORY flag, stating this attribute must be supported by the kernel, like any other attribute. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03RDMA: Use ib_gid_attr during GID modificationParav Pandit
Now that ib_gid_attr contains device, port and index, simplify the provider APIs add_gid() and del_gid() to use device, port and index fields from the ib_gid_attr attributes structure. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03IB/core: Refactor GID modify code for RoCEParav Pandit
Code is refactored to prepare separate functions for RoCE which can do more complex operations related to reference counting, while still maintainining code readability. This includes (a) Simplification to not perform netdevice checks and modifications for IB link layer. (b) Do not add RoCE GID entry which has NULL netdevice; instead return an error. (c) If GID addition fails at provider level add_gid(), do not add the entry in the cache and keep the entry marked as INVALID. (d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they can be used even for modifying default GIDs. This avoid some code duplication in modifying default GIDs. (e) find_gid() routine refers to the data entry flags to qualify a GID as valid or invalid GID rather than depending on attributes and zeroness of the GID content. (f) gid_table_reserve_default() sets the GID default attribute at beginning while setting up the GID table. There is no need to use default_gid flag in low level functions such as write_gid(), add_gid(), del_gid(), as they never need to update the DEFAULT property of the GID entry while during GID table update. As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer searchable as described below. A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB spec version 1.3 section 4.1.1, point (6) whose snippet is below. "The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as the Reserved GID. It shall never be assigned to any endport. It shall not be used as a destination address or in a global routing header (GRH)." GID table cache now only stores valid GID entries. Before this patch, Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using ib_find_cached_gid_by_port() and other similar find routines. Zero GID is no longer searchable as it shall not to be present in GRH or path recored entry as described in IB spec version 1.3 section 4.1.1, point (6), section 12.7.10 and section 12.7.20. ib_cache_update() is simplified to check link layer once, use unified locking scheme for all link layers, removed temporary gid table allocation/free logic. Additionally, (a) Expand ib_gid_attr to store port and index so that GID query routines can get port and index information from the attribute structure. (b) Expand ib_gid_attr to store device as well so that in future code when GID reference counting is done, device is used to reach back to the GID table entry. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-03RDMA/core: Update query_gid documentation for HCA driversParav Pandit
query_gid() should return right GID value for iWarp and IB link layers. It is a no-op for RoCE link layer. Update the documentation to reflect this. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29RDMA/cma: Move rdma_cm_state to cma_priv.hParav Pandit
rdma_cm_state enum is internal to rdma_cm kernel module. It is not required to expose state enums to ULP modules. So lets keep its scope limited to rdma_cm module in cma_priv.h file. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28RDMA/CMA: Add rdma_port_space to UAPISteve Wise
Since the rdma_port_space enum is being passed between user and kernel for user cm_id setup, we need it in a UAPI header. So add it to rdma_user_cm.h. This also fixes the cm_id restrack changes which pass up the port space value via the RDMA_NLDEV_ATTR_RES_PS attribute. Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28RDMA/CMA: remove RDMA_PS_SDPSteve Wise
This is no longer supported, so remove it. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28RDMA/ucma: Introduce safer rdma_addr_size() variantsRoland Dreier
There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-27IB/core: Protect against concurrent access to hardware statsMark Bloch
Currently access to hardware stats buffer isn't protected, this can result in multiple writes and reads at the same time to the same memory location. This can lead to providing an incorrect value to the user. Add a mutex to protect against it. Fixes: b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-26net: Drop NETDEV_UNREGISTER_FINALKirill Tkhai
Last user is gone after bdf5bd7f2132 "rds: tcp: remove register_netdevice_notifier infrastructure.", so we can remove this netdevice command. This allows to delete rtnl_lock() in netdev_run_todo(), which is hot path for net namespace unregistration. dev_change_net_namespace() and netdev_wait_allrefs() have rcu_barrier() before NETDEV_UNREGISTER_FINAL call, and the source commits say they were introduced to delemit the call with NETDEV_UNREGISTER, but this patch leaves them on the places, since they require additional analysis, whether we need in them for something else. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23IB/cma: Resolve route only while receiving CM requestsParav Pandit
Currently CM request for RoCE follows following flow. rdma_create_id() rdma_resolve_addr() rdma_resolve_route() For RC QPs: rdma_connect() ->cma_connect_ib() ->ib_send_cm_req() ->cm_init_av_by_path() ->ib_init_ah_attr_from_path() For UD QPs: rdma_connect() ->cma_resolve_ib_udp() ->ib_send_cm_sidr_req() ->cm_init_av_by_path() ->ib_init_ah_attr_from_path() In both the flows, route is already resolved before sending CM requests. Therefore, code is refactored to avoid resolving route second time in ib_cm layer. ib_init_ah_attr_from_path() is extended to resolve route when it is not yet resolved for RoCE link layer. This is achieved by caller setting route_resolved field in path record whenever it has route already resolved. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-22RDMA/restrack: Remove ambiguity in resource track clean logicLeon Romanovsky
The restrack clean routine had simple, but powerful WARN_ON check to see if all resources are cleared prior to releasing device. The WARN_ON check performed very well, but lack of information which device caused to resource leak, the object type and origin made debug to be fun and challenging at the same time. The fact that all dumps were the same because restrack_clean() is called in dealloc() didn't help either. So let's fix spelling error and convert WARN_ON to be more debug friendly. The dmesg cut below gives example of how the output will look output for the case fixed in patch [1] [ 438.421372] restrack: ------------[ cut here ]------------ [ 438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2 [ 438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed [ 438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed [ 438.429660] restrack: ------------[ cut here ]------------ [1] https://patchwork.kernel.org/patch/10298695/ Cc: Michal Kalderon <Michal.Kalderon@cavium.com> Cc: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Add macros to simplify adding driver specific attributesMatan Barak
Previously, adding driver specific attributes required drivers to declare all the hierarchy - object tree, object, methods and the attributes themselves. A common use case is adding a few attributes to an existing common method. In order to simplify the driver's code, we add some macros to do all these declarations automatically. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new fileMatan Barak
Currently, all objects are declared in uverbs_std_types. This could lead to a huge file once we implement all objects, methods and handlers. Moving each object to its own file to keep the files smaller and more readable. uverbs_std_types.c will only contain the parsing tree definition and objects without any methods. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Expose parsing tree of all common objects to providersMatan Barak
The ioctl() based uverbs is based on merging feature trees. This teaches the generic parser how to parse methods according to the provider's support. In order to support merging with the common objects, exporting the common-object-tree to the provider drivers. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Safely extend existing attributesMatan Barak
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing attributes. The behavior of this flag was the kernel accepts anything bigger than the minimum size it specified. This is unsafe, since in order to safely extend an attribute, we need to make sure unknown size is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the unknown size is zero. In addition, attributes are now decorated with UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum and known length. Users of this flag needs to use copy_from_or_zero functions/macros. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Enable compact representation of uverbs_attr_specMatan Barak
Downstream patches extend uverbs_attr_spec with new fields. In order to save space, we move the type and flags fields to the various attribute flavors contained in the union. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Extend uverbs_ioctl header with driver_idMatan Barak
Extending uverbs_ioctl header with driver_id and another reserved field. driver_id should be used in order to identify the driver. Since every driver could have its own parsing tree, this is necessary for strace support. Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB support and thus we add some reserved fields for future usage. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/uverbs: Move to new headers and make naming consistentMatan Barak
Use macros to make names consistent in ioctl() uAPI: The ioctl() uAPI works with object-method hierarchy. The method part also states which handler should be executed when this method is called from user-space. Therefore, we need to tie method, method's id, method's handler and the object owning this method together. Previously, this was done through explicit developer chosen names. This makes grepping the code harder. Changing the method's name, method's handler and object's name to be automatically generated based on the ids. The headers are split in a way so they be included and used by user-space. One header strictly contains structures that are used directly by user-space applications, where another header is used for internal library (i.e. libibverbs) to form the ioctl() commands. Other header simply contains the required general command structure. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19RDMA/verbs: Remove restrack entry from XRCD structureLeon Romanovsky
XRCD object is not implemented in the restrack, so lets remove it. Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/core: Remove unimplemented ib_peek_cqParav Pandit
ib_peek_cq() verb doesn't seem be implemented in current code. There is some past reference to it at [1] about it being unimplemented. Lot of user documentation created out of kdoc refers to this unimplemented API. Therefore, remove unimplemented API. [1] http://lists.openfabrics.org/pipermail/ofw/2008-May/002465.html Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Move rdma_addr_find_l2_eth_by_grh to core_priv.hParav Pandit
Before commit [1], rdma_addr_find_l2_eth_by_grh() was an exported function and therefore declaration in include/rdma/ib_addr.h was fine. But now that its scope is limited to ib_core module, its better to have it in core_priv.h. [1] commit 1060f8653414 ("IB/{core/cm}: Fix generating a return AH for RoCEE") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Refactor ib_init_ah_attr_from_path() for RoCEParav Pandit
Resolving route for RoCE for a path record is needed only for the received CM requests. Therefore, (a) ib_init_ah_attr_from_path() is refactored first to isolate the code of resolving route. (b) Setting dlid, path bits is not needed for RoCE. Additionally ah attribute initialization is done from the path record entry, so it is better to refer to path record entry type for different link layer instead of ah attribute type while initializing ah attribute itself. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Remove rdma_resolve_ip_route() as exported symbolParav Pandit
rdma_resolve_ip_route() is used only by ib_core module. Therefore it is removed as an exported symbol. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/{core, ipoib}: Simplify ib_find_gid() for unused ndevParav Pandit
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table entries are not based on netdevice. Netdevice parameter is unused here. Therefore, it is removed. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/core: Fix comments of GID query functionsParav Pandit
Exported symbol's comments should be with function definition and not in the header file. Therefore comments of ib_find_cached_gid() and ib_find_cached_gid_by_port() functions are moved closer to their definitions. The function name in then comment is different than the actual function name, fix it to be same as ib_cache_gid_find_by_filter(). Also current comment section of ib_find_cached_gid_by_port() contains the desciption of ib_find_cached_gid(), fix that as well. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-14RDMA/verbs: Simplify modify QP checkLeon Romanovsky
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state makes the checks of out-of-scope redundant. Let's remove them together with updating function signature to return boolean result. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed MR informationSteve Wise
Implement the RDMA nldev netlink interface for dumping detailed MR information. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08RDMA/nldev: provide detailed CM_ID informationSteve Wise
Implement RDMA nldev netlink interface to get detailed CM_ID information. Because cm_id's are attached to rdma devices in various work queue contexts, the pid and task information at restrak_add() time is sometimes not useful. For example, an nvme/f host connection cm_id ends up being bound to a device in a work queue context and the resulting pid at attach time no longer exists after connection setup. So instead we mark all cm_id's created via the rdma_ucm as "user", and all others as "kernel". This required tweaking the restrack code a little. It also required wrapping some rdma_cm functions to allow passing the module name string. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-15IB/uverbs: Use u64_to_user_ptr() not a unionJason Gunthorpe
The union approach will get the endianness wrong sometimes if the kernel's pointer size is 32 bits resulting in EFAULTs when trying to copy to/from user. Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-15IB/uverbs: Always use the attribute size provided by the userMatan Barak
This fixes several bugs around the copy_to/from user path: - copy_to used the user provided size of the attribute and could copy data beyond the end of the kernel buffer into userspace. - copy_from didn't know the size of the kernel buffer and could have left kernel memory unexpectedly un-initialized. - copy_from did not use the user length to determine if the attribute data is inlined or not. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-15RDMA/restrack: Remove unimplemented XRCD objectLeon Romanovsky
Resource tracking of XRCD objects is not implemented in current version of restrack and hence can be removed. Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/core: Map iWarp AH type to undefined in rdma_ah_find_typeDon Hiatt
iWarp devices do not support the creation of address handles so return AH_ATTR_TYPE_UNDEFINED for all iWarp devices. While we are here reduce the size of port_num to u8 and add a comment. Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Reported-by: Parav Pandit <parav@mellanox.com> CC: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove unnecessary fecn and becn fieldsSebastian Sanchez
packet->fecn and packet->becn are calculated in the hot path and are never used. Remove these fields as they show to be costly in a profile. Also, remove initialization for becn and fecn in process_ecn() as they're unconditionally assigned in the function and ensure fecn and becn variables use a boolean type. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Optimize packet type comparison using 9B and bypass code pathsSebastian Sanchez
The packet type comparison used to find out if a packet is a bypass packet in the hot path is an expensive operation as seen in a profile. Determine packet's pkey and migration bit through the bypass and 9B code paths instead. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packetSebastian Sanchez
In hfi1_rc_rcv(), BTH is computed for all packets received. However, it's only used for packets received with opcodes RDMA_WRITE_LAST and SEND_LAST, and it is a costly operation. Compute BTH only in the RDMA_WRITE_LAST/SEND_LAST code path and let the compiler handle endianness conversion for bitwise operations. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29RDMA/restrack: Add general infrastructure to track RDMA resourcesLeon Romanovsky
The RDMA subsystem has very strict set of objects to work with, but it completely lacks tracking facilities and has no visibility of resource utilization. The following patch adds such infrastructure to keep track of RDMA resources to help with debugging of user space applications. The primary user of this infrastructure is RDMA nldev netlink (following patches), to be exposed to userspace via rdmatool, but it is not limited too that. At this stage, the main three objects (PD, CQ and QP) are added, and more will be added later. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29RDMA/core: Save kernel caller name when creating PD and CQ objectsLeon Romanovsky
The KBUILD_MODNAME variable contains the module name and it is known for kernel users during compilation, so let's reuse it to track the owners. Followup patches will store this for resource tracking. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29RDMA/core: Use the MODNAME instead of the function name for pd callersLeon Romanovsky
Each of our modules only allocates a PD in one place, so there isn't any loss in detail, while MODNAME is more useful and recognizable as something to expose to the user. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-29RDMA: Move enum ib_cq_creation_flags to uapi headersJason Gunthorpe
The flags field the enum is used with comes directly from the uapi so it belongs in the uapi headers for clarity and so userspace can use it. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>