| Age | Commit message (Collapse) | Author |
|---|
|
Recently implemented support for sample action in flow_offload infra leads
to following rcu usage warning:
[ 1938.234856] =============================
[ 1938.234858] WARNING: suspicious RCU usage
[ 1938.234863] 5.3.0-rc1+ #574 Not tainted
[ 1938.234866] -----------------------------
[ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage!
[ 1938.234872]
other info that might help us debug this:
[ 1938.234875]
rcu_scheduler_active = 2, debug_locks = 1
[ 1938.234879] 1 lock held by tc/19540:
[ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1938.234900]
stack backtrace:
[ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1938.234911] Call Trace:
[ 1938.234922] dump_stack+0x85/0xc0
[ 1938.234930] tc_setup_flow_action+0xed5/0x2040
[ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower]
[ 1938.234990] tc_new_tfilter+0x3e0/0x970
[ 1938.235021] ? tc_del_tfilter+0x720/0x720
[ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0
[ 1938.235038] ? netlink_deliver_tap+0x95/0x400
[ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0
[ 1938.235053] netlink_rcv_skb+0x49/0x110
[ 1938.235063] netlink_unicast+0x171/0x200
[ 1938.235073] netlink_sendmsg+0x224/0x3f0
[ 1938.235091] sock_sendmsg+0x5e/0x60
[ 1938.235097] ___sys_sendmsg+0x2ae/0x330
[ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0
[ 1938.235138] ? find_held_lock+0x2b/0x80
[ 1938.235147] ? do_user_addr_fault+0x22d/0x490
[ 1938.235160] __sys_sendmsg+0x59/0xa0
[ 1938.235178] do_syscall_64+0x5c/0xb0
[ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1938.235192] RIP: 0033:0x7ff9a4d597b8
[ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
ec 28 89 54
[ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8
[ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003
[ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001
Change tcf_sample_psample_group() helper to allow using it from both rtnl
and rcu protected contexts.
Fixes: a7a7be6087b0 ("net/sched: add sample action to the hardware intermediate representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently implemented support for police action in flow_offload infra leads
to following rcu usage warning:
[ 1925.881092] =============================
[ 1925.881094] WARNING: suspicious RCU usage
[ 1925.881098] 5.3.0-rc1+ #574 Not tainted
[ 1925.881100] -----------------------------
[ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage!
[ 1925.881106]
other info that might help us debug this:
[ 1925.881109]
rcu_scheduler_active = 2, debug_locks = 1
[ 1925.881112] 1 lock held by tc/18591:
[ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970
[ 1925.881124]
stack backtrace:
[ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574
[ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1925.881132] Call Trace:
[ 1925.881138] dump_stack+0x85/0xc0
[ 1925.881145] tc_setup_flow_action+0x1771/0x2040
[ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower]
[ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower]
[ 1925.881200] tc_new_tfilter+0x3e0/0x970
[ 1925.881231] ? tc_del_tfilter+0x720/0x720
[ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0
[ 1925.881250] ? netlink_deliver_tap+0x95/0x400
[ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0
[ 1925.881264] netlink_rcv_skb+0x49/0x110
[ 1925.881275] netlink_unicast+0x171/0x200
[ 1925.881284] netlink_sendmsg+0x224/0x3f0
[ 1925.881299] sock_sendmsg+0x5e/0x60
[ 1925.881305] ___sys_sendmsg+0x2ae/0x330
[ 1925.881309] ? task_work_add+0x43/0x50
[ 1925.881314] ? fput_many+0x45/0x80
[ 1925.881329] ? __lock_acquire+0x248/0x1930
[ 1925.881342] ? find_held_lock+0x2b/0x80
[ 1925.881347] ? task_work_run+0x7b/0xd0
[ 1925.881359] __sys_sendmsg+0x59/0xa0
[ 1925.881375] do_syscall_64+0x5c/0xb0
[ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1925.881384] RIP: 0033:0x7feb245047b8
[ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83
ec 28 89 54
[ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8
[ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003
[ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001
[ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001
Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to
allow using them from both rtnl and rcu protected contexts.
Fixes: 8c8cfc6ed274 ("net/sched: add police action to the hardware intermediate representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looks like we were slightly overzealous with the shutdown()
cleanup. Even though the sock->sk_state can reach CLOSED again,
socket->state will not got back to SS_UNCONNECTED once
connections is ESTABLISHED. Meaning we will see EISCONN if
we try to reconnect, and EINVAL if we try to listen.
Only listen sockets can be shutdown() and reused, but since
ESTABLISHED sockets can never be re-connected() or used for
listen() we don't need to try to clean up the ULP state early.
Fixes: 32857cf57f92 ("net/tls: fix transition through disconnect with close")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* revert NETIF_F_LLTX usage as it caused problems
* avoid warning on WMM parameters from AP that are too short
* fix possible null-ptr dereference in hwsim
* fix interface combinations with 4-addr and crypto control
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.
General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.
Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.
Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-07-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix segfault in libbpf, from Andrii.
2) fix gso_segs access, from Eric.
3) tls/sockmap fixes, from Jakub and John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a map free is called and in parallel a socket is closed we
have two paths that can potentially reset the socket prot ops, the
bpf close() path and the map free path. This creates a problem
with which prot ops should be used from the socket closed side.
If the map_free side completes first then we want to call the
original lowest level ops. However, if the tls path runs first
we want to call the sockmap ops. Additionally there was no locking
around prot updates in TLS code paths so the prot ops could
be changed multiple times once from TLS path and again from sockmap
side potentially leaving ops pointed at either TLS or sockmap
when psock and/or tls context have already been destroyed.
To fix this race first only update ops inside callback lock
so that TLS, sockmap and lowest level all agree on prot state.
Second and a ULP callback update() so that lower layers can
inform the upper layer when they are being removed allowing the
upper layer to reset prot ops.
This gets us close to allowing sockmap and tls to be stacked
in arbitrary order but will save that patch for *next trees.
v4:
- make sure we don't free things for device;
- remove the checks which swap the callbacks back
only if TLS is at the top.
Reported-by: syzbot+06537213db7ba2745c4a@syzkaller.appspotmail.com
Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
It is possible (via shutdown()) for TCP socks to go through TCP_CLOSE
state via tcp_disconnect() without actually calling tcp_close which
would then call the tls close callback. Because of this a user could
disconnect a socket then put it in a LISTEN state which would break
our assumptions about sockets always being ESTABLISHED state.
More directly because close() can call unhash() and unhash is
implemented by sockmap if a sockmap socket has TLS enabled we can
incorrectly destroy the psock from unhash() and then call its close
handler again. But because the psock (sockmap socket representation)
is already destroyed we call close handler in sk->prot. However,
in some cases (TLS BASE/BASE case) this will still point at the
sockmap close handler resulting in a circular call and crash reported
by syzbot.
To fix both above issues implement the unhash() routine for TLS.
v4:
- add note about tls offload still needing the fix;
- move sk_proto to the cold cache line;
- split TX context free into "release" and "free",
otherwise the GC work itself is in already freed
memory;
- more TX before RX for consistency;
- reuse tls_ctx_free();
- schedule the GC work after we're done with context
to avoid UAF;
- don't set the unhash in all modes, all modes "inherit"
TLS_BASE's callbacks anyway;
- disable the unhash hook for TLS_HW.
Fixes: 3c4d7559159bf ("tls: kernel TLS support")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The tls close() callback currently drops the sock lock to call
strp_done(). Split up the RX cleanup into stopping the strparser
and releasing most resources, syncing strparser and finally
freeing the context.
To avoid the need for a strp_done() call on the cleanup path
of device offload make sure we don't arm the strparser until
we are sure init will be successful.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The tls close() callback currently drops the sock lock, makes a
cancel_delayed_work_sync() call, and then relocks the sock.
By restructuring the code we can avoid droping lock and then
reclaiming it. To simplify this we do the following,
tls_sk_proto_close
set_bit(CLOSING)
set_bit(SCHEDULE)
cancel_delay_work_sync() <- cancel workqueue
lock_sock(sk)
...
release_sock(sk)
strp_done()
Setting the CLOSING bit prevents the SCHEDULE bit from being
cleared by any workqueue items e.g. if one happens to be
scheduled and run between when we set SCHEDULE bit and cancel
work. Then because SCHEDULE bit is set now no new work will
be scheduled.
Tested with net selftests and bpf selftests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In tls_set_device_offload_rx() we prepare the software context
for RX fallback and proceed to add the connection to the device.
Unfortunately, software context prep includes arming strparser
so in case of a later error we have to release the socket lock
to call strp_done().
In preparation for not releasing the socket lock half way through
callbacks move arming strparser into a separate function.
Following patches will make use of that.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.
We should allow these flows to make progress.
This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.
It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15
Note for < 4.15 backports :
tcp_rtx_queue_tail() will probably look like :
static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk)
{
struct sk_buff *skb = tcp_send_head(sk);
return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk);
}
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jonathan Looney <jtl@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since ERR_PTR() is an inline, not a macro, just open-code it
here so it's usable as an initializer, fixing the build in
brcmfmac.
Reported-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Fixes: 901bb9891855 ("nl80211: require and validate vendor command policy")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This object stores the flow block callbacks that are attached to this
block. Update flow_block_cb_lookup() to take this new object.
This patch restores the block sharing feature.
Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename this type definition and adapt users.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No need to annotate the netns on the flow block callback object,
flow_block_cb_is_busy() already checks for used blocks.
Fixes: d63db30c8537 ("net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix a deadlock when module is requested via netlink_bind()
in nfnetlink, from Florian Westphal.
2) Fix ipt_rpfilter and ip6t_rpfilter with VRF, from Miaohe Lin.
3) Skip master comparison in SIP helper to fix expectation clash
under two valid scenarios, from xiao ruizhu.
4) Remove obsolete comments in nf_conntrack codebase, from
Yonatan Goldschmidt.
5) Fix redirect extension module autoload, from Christian Hesse.
6) Fix incorrect mssg option sent to client in synproxy,
from Fernando Fernandez.
7) Fix incorrect window calculations in TCP conntrack, from
Florian Westphal.
8) Don't bail out when updating basechain policy due to recent
offload works, also from Florian.
9) Allow symhash to use modulus 1 as other hash extensions do,
from Laura.Garcia.
10) Missing NAT chain module autoload for the inet family,
from Phil Sutter.
11) Fix missing adjustment of TCP RST packet in synproxy,
from Fernando Fernandez.
12) Skip EAGAIN path when nft_meta_bridge is built-in or
not selected.
13) Conntrack bridge does not depend on nf_tables_bridge.
14) Turn NF_TABLES_BRIDGE into tristate to fix possible
link break of nft_meta_bridge, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Neal reported incorrect use of ns_capable() from bpf hook.
bpf_setsockopt(...TCP_CONGESTION...)
-> tcp_set_congestion_control()
-> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)
-> ns_capable_common()
-> current_cred()
-> rcu_dereference_protected(current->cred, 1)
Accessing 'current' in bpf context makes no sense, since packets
are processed from softirq context.
As Neal stated : The capability check in tcp_set_congestion_control()
was written assuming a system call context, and then was reused from
a BPF call site.
The fix is to add a new parameter to tcp_set_congestion_control(),
so that the ns_capable() call is only performed under the right
context.
Fixes: 91b5b21c7c16 ("bpf: Add support for changing congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now synproxy sends the mss value set by the user on client syn-ack packet
instead of the mss value that client announced.
Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When conntracks change during a dialog, SDP messages may be sent from
different conntracks to establish expects with identical tuples. In this
case expects conflict may be detected for the 2nd SDP message and end up
with a process failure.
The fixing here is to reuse an existing expect who has the same tuple for a
different conntrack if any.
Here are two scenarios for the case.
1)
SERVER CPE
| INVITE SDP |
5060 |<----------------------|5060
| 100 Trying |
5060 |---------------------->|5060
| 183 SDP |
5060 |---------------------->|5060 ===> Conntrack 1
| PRACK |
50601 |<----------------------|5060
| 200 OK (PRACK) |
50601 |---------------------->|5060
| 200 OK (INVITE) |
5060 |---------------------->|5060
| ACK |
50601 |<----------------------|5060
| |
|<--- RTP stream ------>|
| |
| INVITE SDP (t38) |
50601 |---------------------->|5060 ===> Conntrack 2
With a certain configuration in the CPE, SIP messages "183 with SDP" and
"re-INVITE with SDP t38" will go through the sip helper to create
expects for RTP and RTCP.
It is okay to create RTP and RTCP expects for "183", whose master
connection source port is 5060, and destination port is 5060.
In the "183" message, port in Contact header changes to 50601 (from the
original 5060). So the following requests e.g. PRACK and ACK are sent to
port 50601. It is a different conntrack (let call Conntrack 2) from the
original INVITE (let call Conntrack 1) due to the port difference.
In this example, after the call is established, there is RTP stream but no
RTCP stream for Conntrack 1, so the RTP expect created upon "183" is
cleared, and RTCP expect created for Conntrack 1 retains.
When "re-INVITE with SDP t38" arrives to create RTP&RTCP expects, current
ALG implementation will call nf_ct_expect_related() for RTP and RTCP. The
expects tuples are identical to those for Conntrack 1. RTP expect for
Conntrack 2 succeeds in creation as the one for Conntrack 1 has been
removed. RTCP expect for Conntrack 2 fails in creation because it has
idential tuples and 'conflict' with the one retained for Conntrack 1. And
then result in a failure in processing of the re-INVITE.
2)
SERVER A CPE
| REGISTER |
5060 |<------------------| 5060 ==> CT1
| 200 |
5060 |------------------>| 5060
| |
| INVITE SDP(1) |
5060 |<------------------| 5060
| 300(multi choice) |
5060 |------------------>| 5060 SERVER B
| ACK |
5060 |<------------------| 5060
| INVITE SDP(2) |
5060 |-------------------->| 5060 ==> CT2
| 100 |
5060 |<--------------------| 5060
| 200(contact changes)|
5060 |<--------------------| 5060
| ACK |
5060 |-------------------->| 50601 ==> CT3
| |
|<--- RTP stream ---->|
| |
| BYE |
5060 |<--------------------| 50601
| 200 |
5060 |-------------------->| 50601
| INVITE SDP(3) |
5060 |<------------------| 5060 ==> CT1
CPE sends an INVITE request(1) to Server A, and creates a RTP&RTCP expect
pair for this Conntrack 1 (CT1). Server A responds 300 to redirect to
Server B. The RTP&RTCP expect pairs created on CT1 are removed upon 300
response.
CPE sends the INVITE request(2) to Server B, and creates an expect pair
for the new conntrack (due to destination address difference), let call
CT2. Server B changes the port to 50601 in 200 OK response, and the
following requests ACK and BYE from CPE are sent to 50601. The call is
established. There is RTP stream and no RTCP stream. So RTP expect is
removed and RTCP expect for CT2 retains.
As BYE request is sent from port 50601, it is another conntrack, let call
CT3, different from CT2 due to the port difference. So the BYE request will
not remove the RTCP expect for CT2.
Then another outgoing call is made, with the same RTP port being used (not
definitely but possibly). CPE firstly sends the INVITE request(3) to Server
A, and tries to create a RTP&RTCP expect pairs for this CT1. In current ALG
implementation, the RTCP expect for CT1 fails in creation because it
'conflicts' with the residual one for CT2. As a result the INVITE request
fails to send.
Signed-off-by: xiao ruizhu <katrina.xiaorz@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After recent refactoring of block offlads infrastructure, indr_dev->block
pointer is dereferenced before it is verified to be non-NULL. Example stack
trace where this behavior leads to NULL-pointer dereference error when
creating vxlan dev on system with mlx5 NIC with offloads enabled:
[ 1157.852938] ==================================================================
[ 1157.866877] BUG: KASAN: null-ptr-deref in tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.880877] Read of size 4 at addr 0000000000000090 by task ip/3829
[ 1157.901637] CPU: 22 PID: 3829 Comm: ip Not tainted 5.2.0-rc6+ #488
[ 1157.914438] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1157.929031] Call Trace:
[ 1157.938318] dump_stack+0x9a/0xeb
[ 1157.948362] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.960262] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.972082] __kasan_report+0x176/0x192
[ 1157.982513] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.994348] kasan_report+0xe/0x20
[ 1158.004324] tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1158.015950] ? tcf_block_setup+0x430/0x430
[ 1158.026558] ? kasan_unpoison_shadow+0x30/0x40
[ 1158.037464] __tc_indr_block_cb_register+0x5f5/0xf20
[ 1158.049288] ? mlx5e_rep_indr_tc_block_unbind+0xa0/0xa0 [mlx5_core]
[ 1158.062344] ? tc_indr_block_dev_put.part.47+0x5c0/0x5c0
[ 1158.074498] ? rdma_roce_rescan_device+0x20/0x20 [ib_core]
[ 1158.086580] ? br_device_event+0x98/0x480 [bridge]
[ 1158.097870] ? strcmp+0x30/0x50
[ 1158.107578] mlx5e_nic_rep_netdevice_event+0xdd/0x180 [mlx5_core]
[ 1158.120212] notifier_call_chain+0x6d/0xa0
[ 1158.130753] register_netdevice+0x6fc/0x7e0
[ 1158.141322] ? netdev_change_features+0xa0/0xa0
[ 1158.152218] ? vxlan_config_apply+0x210/0x310 [vxlan]
[ 1158.163593] __vxlan_dev_create+0x2ad/0x520 [vxlan]
[ 1158.174770] ? vxlan_changelink+0x490/0x490 [vxlan]
[ 1158.185870] ? rcu_read_unlock+0x60/0x60 [vxlan]
[ 1158.196798] vxlan_newlink+0x99/0xf0 [vxlan]
[ 1158.207303] ? __vxlan_dev_create+0x520/0x520 [vxlan]
[ 1158.218601] ? rtnl_create_link+0x3d0/0x450
[ 1158.228900] __rtnl_newlink+0x8a7/0xb00
[ 1158.238701] ? stack_access_ok+0x35/0x80
[ 1158.248450] ? rtnl_link_unregister+0x1a0/0x1a0
[ 1158.258735] ? find_held_lock+0x6d/0xd0
[ 1158.268379] ? is_bpf_text_address+0x67/0xf0
[ 1158.278330] ? lock_acquire+0xc1/0x1f0
[ 1158.287686] ? is_bpf_text_address+0x5/0xf0
[ 1158.297449] ? is_bpf_text_address+0x86/0xf0
[ 1158.307310] ? kernel_text_address+0xec/0x100
[ 1158.317155] ? arch_stack_walk+0x92/0xe0
[ 1158.326497] ? __kernel_text_address+0xe/0x30
[ 1158.336213] ? unwind_get_return_address+0x2f/0x50
[ 1158.346267] ? create_prof_cpu_mask+0x20/0x20
[ 1158.355936] ? arch_stack_walk+0x92/0xe0
[ 1158.365117] ? stack_trace_save+0x8a/0xb0
[ 1158.374272] ? stack_trace_consume_entry+0x80/0x80
[ 1158.384226] ? match_held_lock+0x33/0x210
[ 1158.393216] ? kasan_unpoison_shadow+0x30/0x40
[ 1158.402593] rtnl_newlink+0x53/0x80
[ 1158.410925] rtnetlink_rcv_msg+0x3a5/0x600
[ 1158.419777] ? validate_linkmsg+0x400/0x400
[ 1158.428620] ? find_held_lock+0x6d/0xd0
[ 1158.437117] ? match_held_lock+0x1b/0x210
[ 1158.445760] ? validate_linkmsg+0x400/0x400
[ 1158.454642] netlink_rcv_skb+0xc7/0x1f0
[ 1158.463150] ? netlink_ack+0x470/0x470
[ 1158.471538] ? netlink_deliver_tap+0x1f3/0x5a0
[ 1158.480607] netlink_unicast+0x2ae/0x350
[ 1158.489099] ? netlink_attachskb+0x340/0x340
[ 1158.497935] ? _copy_from_iter_full+0xde/0x3b0
[ 1158.506945] ? __virt_addr_valid+0xb6/0xf0
[ 1158.515578] ? __check_object_size+0x159/0x240
[ 1158.524515] netlink_sendmsg+0x4d3/0x630
[ 1158.532879] ? netlink_unicast+0x350/0x350
[ 1158.541400] ? netlink_unicast+0x350/0x350
[ 1158.549805] sock_sendmsg+0x94/0xa0
[ 1158.557561] ___sys_sendmsg+0x49d/0x570
[ 1158.565625] ? copy_msghdr_from_user+0x210/0x210
[ 1158.574457] ? __fput+0x1e2/0x330
[ 1158.581948] ? __kasan_slab_free+0x130/0x180
[ 1158.590407] ? kmem_cache_free+0xb6/0x2d0
[ 1158.598574] ? mark_lock+0xc7/0x790
[ 1158.606177] ? task_work_run+0xcf/0x100
[ 1158.614165] ? exit_to_usermode_loop+0x102/0x110
[ 1158.622954] ? __lock_acquire+0x963/0x1ee0
[ 1158.631199] ? lockdep_hardirqs_on+0x260/0x260
[ 1158.639777] ? match_held_lock+0x1b/0x210
[ 1158.647918] ? lockdep_hardirqs_on+0x260/0x260
[ 1158.656501] ? match_held_lock+0x1b/0x210
[ 1158.664643] ? __fget_light+0xa6/0xe0
[ 1158.672423] ? __sys_sendmsg+0xd2/0x150
[ 1158.680334] __sys_sendmsg+0xd2/0x150
[ 1158.688063] ? __ia32_sys_shutdown+0x30/0x30
[ 1158.696435] ? lock_downgrade+0x2e0/0x2e0
[ 1158.704541] ? mark_held_locks+0x1a/0x90
[ 1158.712611] ? mark_held_locks+0x1a/0x90
[ 1158.720619] ? do_syscall_64+0x1e/0x2c0
[ 1158.728530] do_syscall_64+0x78/0x2c0
[ 1158.736254] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1158.745414] RIP: 0033:0x7f62d505cb87
[ 1158.753070] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00[87/1817]
48 89 f3 48
[ 1158.780924] RSP: 002b:00007fffd9832268 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1158.793204] RAX: ffffffffffffffda RBX: 000000005d26048f RCX: 00007f62d505cb87
[ 1158.805111] RDX: 0000000000000000 RSI: 00007fffd98322d0 RDI: 0000000000000003
[ 1158.817055] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 1158.828987] R10: 00007f62d50ce260 R11: 0000000000000246 R12: 0000000000000001
[ 1158.840909] R13: 000000000067e540 R14: 0000000000000000 R15: 000000000067ed20
[ 1158.852873] ==================================================================
Introduce new function tcf_block_non_null_shared() that verifies block
pointer before dereferencing it to obtain index. Use the function in
tc_indr_block_ing_cmd() to prevent NULL pointer dereference.
Fixes: 955bcb6ea0df ("drivers: net: use flow block API")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rules matching on loopback iif do not need early flow dissection as the
packet originates from the host. Stop counting such rules in
fib_rule_requires_fldissect
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
|
|
This patch adds hardware offload support for nftables through the
existing netdev_ops->ndo_setup_tc() interface, the TC_SETUP_CLSFLOWER
classifier and the flow rule API. This hardware offload support is
available for the NFPROTO_NETDEV family and the ingress hook.
Each nftables expression has a new ->offload interface, that is used to
populate the flow rule object that is attached to the transaction
object.
There is a new per-table NFT_TABLE_F_HW flag, that is set on to offload
an entire table, including all of its chains.
This patch supports for basic metadata (layer 3 and 4 protocol numbers),
5-tuple payload matching and the accept/drop actions; this also includes
basechain hardware offload only.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
And any other existing fields in this structure that refer to tc.
Specifically:
* tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule().
* TC_CLSFLOWER_* to FLOW_CLS_*.
* tc_cls_common_offload to tc_cls_common_offload.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a function to check if flow block callback is already in
use. Call this new function from flow_block_cb_setup_simple() and from
drivers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unused, now replaced by flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.
This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.
Remove tc_block_offload alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch completes the flow block API to introduce:
* flow_block_cb_priv() to access callback private data.
* flow_block_cb_incref() to bump reference counter on this flow block.
* flow_block_cb_decref() to decrement the reference counter.
These functions are taken from the existing tcf_block_cb_priv(),
tcf_block_cb_incref() and tcf_block_cb_decref().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the list handling functions for the flow block API:
* flow_block_cb_lookup() allows drivers to look up for existing flow blocks.
* flow_block_cb_add() adds a flow block to the per driver list to be registered
by the core.
* flow_block_cb_remove() to remove a flow block from the list of existing
flow blocks per driver and to request the core to unregister this.
The flow block API also annotates the netns this flow block belongs to.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new helper function to allocate flow_block_cb objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and
remove temporary tcf_block_binder_type alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove
temporary tc_block_command alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.
This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.
This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.
This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.
There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Retreives connection tracking zone, mark, label, and state from
a SKB.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow sending a packet to conntrack module for connection tracking.
The packet will be marked with conntrack connection's state, and
any metadata such as conntrack mark and label. This state metadata
can later be matched against with tc classifers, for example with the
flower classifier as below.
In addition to committing new connections the user can optionally
specific a zone to track within, set a mark/label and configure nat
with an address range and port range.
Usage is as follows:
$ tc qdisc add dev ens1f0_0 ingress
$ tc qdisc add dev ens1f0_1 ingress
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 2
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_state +trk+new \
action ct zone 2 commit mark 0xbb nat src addr 5.5.5.7 pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_0 ingress \
prio 1 chain 2 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 0 proto ip \
flower ip_proto tcp ct_state -trk \
action ct zone 2 pipe \
action goto chain 1
$ tc filter add dev ens1f0_1 ingress \
prio 1 chain 1 proto ip \
flower ct_zone 2 ct_mark 0xbb ct_state +trk+est \
action ct nat pipe \
action mirred egress redirect dev ens1f0_0
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Changelog:
V5->V6:
Added CONFIG_NF_DEFRAG_IPV6 in handle fragments ipv6 case
V4->V5:
Reordered nf_conntrack_put() in tcf_ct_skb_nfct_cached()
V3->V4:
Added strict_start_type for act_ct policy
V2->V3:
Fixed david's comments: Removed extra newline after rcu in tcf_ct_params , and indent of break in act_ct.c
V1->V2:
Fixed parsing of ranges TCA_CT_NAT_IPV6_MAX as 'else' case overwritten ipv4 max
Refactored NAT_PORT_MIN_MAX range handling as well
Added ipv4/ipv6 defragmentation
Removed extra skb pull push of nw offset in exectute nat
Refactored tcf_ct_skb_network_trim after pull
Removed TCA_ACT_CT define
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In an eswitch, PCI VF may have port which is normally represented using
a representor netdevice.
To have better visibility of eswitch port, its association with VF,
and its representor netdevice, introduce a PCI VF port flavour.
When devlink port flavour is PCI VF, fill up PCI VF attributes of
the port.
Extend port name creation using PCI PF and VF number scheme on best
effort basis, so that vendor drivers can skip defining their own scheme.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0
pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In an eswitch, PCI PF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with
PF and a representor netdevice, introduce a PCI PF port
flavour and port attriute.
When devlink port flavour is PCI PF, fill up PCI PF attributes of the
port.
Extend port name creation using PCI PF number on best effort basis.
So that vendor drivers can skip defining their own scheme.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To support additional devlink port flavours and to support few common
and few different port attributes, move physical port attributes to a
different structure.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a return code for the tls_dev_resync callback.
When the driver TX resync fails, kernel can retry the resync again
until it succeeds. This prevents drivers from attempting to offload
TLS packets if the connection is known to be out of sync.
We don't worry about the RX resync since they will be retried naturally
as more encrypted records get received.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like other endpoint features, strm_interleave should be moved to
sctp_endpoint and renamed to intl_enable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To keep consistent with other asoc features, we move intl_enable
to peer.intl_capable in asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like reconf_enable, prsctp_enable should also be removed from asoc,
as asoc->peer.prsctp_capable has taken its job.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
asoc's reconf support is actually decided by the 4-shakehand negotiation,
not something that users can set by sockopt. asoc->peer.reconf_capable is
working for this. So remove it from asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, TC offers the ability to match on the MPLS fields of a packet
through the use of the flow_dissector_key_mpls struct. However, as yet, TC
actions do not allow the modification or manipulation of such fields.
Add a new module that registers TC action ops to allow manipulation of
MPLS. This includes the ability to push and pop headers as well as modify
the contents of new or existing headers. A further action to decrement the
TTL field of an MPLS header is also provided with a new helper added to
support this.
Examples of the usage of the new action with flower rules to push and pop
MPLS labels are:
tc filter add dev eth0 protocol ip parent ffff: flower \
action mpls push protocol mpls_uc label 123 \
action mirred egress redirect dev eth1
tc filter add dev eth0 protocol mpls_uc parent ffff: flower \
action mpls pop protocol ipv4 \
action mirred egress redirect dev eth1
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two cases of overlapping changes, nothing fancy.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Processes can request ipv6 flowlabels with cmsg IPV6_FLOWINFO.
If not set, by default an autogenerated flowlabel is selected.
Explicit flowlabels require a control operation per label plus a
datapath check on every connection (every datagram if unconnected).
This is particularly expensive on unconnected sockets multiplexing
many flows, such as QUIC.
In the common case, where no lease is exclusive, the check can be
safely elided, as both lease request and check trivially succeed.
Indeed, autoflowlabel does the same even with exclusive leases.
Elide the check if no process has requested an exclusive lease.
fl6_sock_lookup previously returns either a reference to a lease or
NULL to denote failure. Modify to return a real error and update
all callers. On return NULL, they can use the label and will elide
the atomic_dec in fl6_sock_release.
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Changes RFC->v1:
- use static_key_false_deferred to rate limit jump label operations
- call static_key_deferred_flush to stop timers on exit
- move decrement out of RCU context
- defer optimization also if opt data is associated with a lease
- updated all fp6_sock_lookup callers, not just udp
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
|
|
socket->wq is assign-once, set when we are initializing both
struct socket it's in and struct socket_wq it points to. As the
matter of fact, the only reason for separate allocation was the
ability to RCU-delay freeing of socket_wq. RCU-delaying the
freeing of socket itself gets rid of that need, so we can just
fold struct socket_wq into the end of struct socket and simplify
the life both for sock_alloc_inode() (one allocation instead of
two) and for tun/tap oddballs, where we used to embed struct socket
and struct socket_wq into the same structure (now - embedding just
the struct socket).
Note that reference to struct socket_wq in struct sock does remain
a reference - that's unchanged.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-07-09
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Lots of libbpf improvements: i) addition of new APIs to attach BPF
programs to tracing entities such as {k,u}probes or tracepoints,
ii) improve specification of BTF-defined maps by eliminating the
need for data initialization for some of the members, iii) addition
of a high-level API for setting up and polling perf buffers for
BPF event output helpers, all from Andrii.
2) Add "prog run" subcommand to bpftool in order to test-run programs
through the kernel testing infrastructure of BPF, from Quentin.
3) Improve verifier for BPF sockaddr programs to support 8-byte stores
for user_ip6 and msg_src_ip6 members given clang tends to generate
such stores, from Stanislav.
4) Enable the new BPF JIT zero-extension optimization for further
riscv64 ALU ops, from Luke.
5) Fix a bpftool json JIT dump crash on powerpc, from Jiri.
6) Fix an AF_XDP race in generic XDP's receive path, from Ilya.
7) Various smaller fixes from Ilya, Yue and Arnd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
