summaryrefslogtreecommitdiff
path: root/include/net/netlabel.h
AgeCommit message (Collapse)Author
2016-06-27netlabel: Implement CALIPSO config functions for SMACK.Huw Davies
SMACK uses similar functions to control CIPSO, these are the equivalent functions for CALIPSO and follow exactly the same semantics. int netlbl_cfg_calipso_add(struct calipso_doi *doi_def, struct netlbl_audit *audit_info) Adds a CALIPSO doi. void netlbl_cfg_calipso_del(u32 doi, struct netlbl_audit *audit_info) Removes a CALIPSO doi. int netlbl_cfg_calipso_map_add(u32 doi, const char *domain, const struct in6_addr *addr, const struct in6_addr *mask, struct netlbl_audit *audit_info) Creates a mapping between a domain and a CALIPSO doi. If addr and mask are non-NULL this creates an address-selector type mapping. This also extends netlbl_cfg_map_del() to remove IPv6 address-selector mappings. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Add a label cache.Huw Davies
This works in exactly the same way as the CIPSO label cache. The idea is to allow the lsm to cache the result of a secattr lookup so that it doesn't need to perform the lookup for every skbuff. It introduces two sysctl controls: calipso_cache_enable - enables/disables the cache. calipso_cache_bucket_size - sets the size of a cache bucket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Pass a family parameter to netlbl_skbuff_err().Huw Davies
This makes it possible to route the error to the appropriate labelling engine. CALIPSO is far less verbose than CIPSO when encountering a bogus packet, so there is no need for a CALIPSO error handler. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Allow the lsm to label the skbuff directly.Huw Davies
In some cases, the lsm needs to add the label to the skbuff directly. A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4 behaviour. This allows selinux to label the skbuffs that it requires. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Allow request sockets to be relabelled by the lsm.Huw Davies
Request sockets need to have a label that takes into account the incoming connection as well as their parent's label. This is used for the outgoing SYN-ACK and for their child full-socket. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27calipso: Set the calipso socket label to match the secattr.Huw Davies
CALIPSO is a hop-by-hop IPv6 option. A lot of this patch is based on the equivalent CISPO code. The main difference is due to manipulating the options in the hop-by-hop header. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Move bitmap manipulation functions to the NetLabel core.Huw Davies
This is to allow the CALIPSO labelling engine to use these. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Add support for removing a CALIPSO DOI.Huw Davies
Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command. It requires the attribute: NLBL_CALIPSO_A_DOI. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Add support for enumerating the CALIPSO DOI list.Huw Davies
Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command. It takes no attributes. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Add support for querying a CALIPSO DOI.Huw Davies
Query a specified DOI through the NLBL_CALIPSO_C_LIST command. It requires the attribute: NLBL_CALIPSO_A_DOI. The reply will contain: NLBL_CALIPSO_A_MTYPE Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27netlabel: Initial support for the CALIPSO netlink protocol.Huw Davies
CALIPSO is a packet labelling protocol for IPv6 which is very similar to CIPSO. It is specified in RFC 5570. Much of the code is based on the current CIPSO code. This adds support for adding passthrough-type CALIPSO DOIs through the NLBL_CALIPSO_C_ADD command. It requires attributes: NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS. NLBL_CALIPSO_A_DOI. In passthrough mode the CALIPSO engine will map MLS secattr levels and categories directly to the packet label. At this stage, the major difference between this and the CIPSO code is that IPv6 may be compiled as a module. To allow for this the CALIPSO functions are registered at module init time. Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2014-08-07netlabel: fix the netlbl_catmap_setlong() dummy functionPaul Moore
When I added the netlbl_catmap_setlong() function I mistakenly forgot to mark the associated dummy function as an inline. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Moore <pmoore@redhat.com>
2014-08-01netlabel: shorter names for the NetLabel catmap funcs/structsPaul Moore
Historically the NetLabel LSM secattr catmap functions and data structures have had very long names which makes a mess of the NetLabel code and anyone who uses NetLabel. This patch renames the catmap functions and structures from "*_secattr_catmap_*" to just "*_catmap_*" which improves things greatly. There are no substantial code or logic changes in this patch. Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01netlabel: fix the horribly broken catmap functionsPaul Moore
The NetLabel secattr catmap functions, and the SELinux import/export glue routines, were broken in many horrible ways and the SELinux glue code fiddled with the NetLabel catmap structures in ways that we probably shouldn't allow. At some point this "worked", but that was likely due to a bit of dumb luck and sub-par testing (both inflicted by yours truly). This patch corrects these problems by basically gutting the code in favor of something less obtuse and restoring the NetLabel abstractions in the SELinux catmap glue code. Everything is working now, and if it decides to break itself in the future this code will be much easier to debug than the code it replaces. One noteworthy side effect of the changes is that it is no longer necessary to allocate a NetLabel catmap before calling one of the NetLabel APIs to set a bit in the catmap. NetLabel will automatically allocate the catmap nodes when needed, resulting in less allocations when the lowest bit is greater than 255 and less code in the LSMs. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01netlabel: fix a problem when setting bits below the previously lowest bitPaul Moore
The NetLabel category (catmap) functions have a problem in that they assume categories will be set in an increasing manner, e.g. the next category set will always be larger than the last. Unfortunately, this is not a valid assumption and could result in problems when attempting to set categories less than the startbit in the lowest catmap node. In some cases kernel panics and other nasties can result. This patch corrects the problem by checking for this and allocating a new catmap node instance and placing it at the front of the list. Cc: stable@vger.kernel.org Reported-by: Christian Evans <frodox@zoho.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-13audit: convert all sessionid declaration to unsigned intEric Paris
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-12-06include/net/: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-17userns: Convert the audit loginuid to be a kuidEric W. Biederman
Always store audit loginuids in type kuid_t. Print loginuids by converting them into uids in the appropriate user namespace, and then printing the resulting uid. Modify audit_get_loginuid to return a kuid_t. Modify audit_set_loginuid to take a kuid_t. Modify /proc/<pid>/loginuid on read to convert the loginuid into the user namespace of the opener of the file. Modify /proc/<pid>/loginud on write to convert the loginuid rom the user namespace of the opener of the file. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Paul Moore <paul@paul-moore.com> ? Cc: David Miller <davem@davemloft.net> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-08-01doc: Update the email address for Paul Moore in various source filesPaul Moore
My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-03-28netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connectionsPaul Moore
This patch cleans up a lot of the Smack network access control code. The largest changes are to fix the labeling of incoming TCP connections in a manner similar to the recent SELinux changes which use the security_inet_conn_request() hook to label the request_sock and let the label move to the child socket via the normal network stack mechanisms. In addition to the incoming TCP connection fixes this patch also removes the smk_labled field from the socket_smack struct as the minor optimization advantage was outweighed by the difficulty in maintaining it's proper state. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-03-28netlabel: Label incoming TCP connections correctly in SELinuxPaul Moore
The current NetLabel/SELinux behavior for incoming TCP connections works but only through a series of happy coincidences that rely on the limited nature of standard CIPSO (only able to convey MLS attributes) and the write equality imposed by the SELinux MLS constraints. The problem is that network sockets created as the result of an incoming TCP connection were not on-the-wire labeled based on the security attributes of the parent socket but rather based on the wire label of the remote peer. The issue had to do with how IP options were managed as part of the network stack and where the LSM hooks were in relation to the code which set the IP options on these newly created child sockets. While NetLabel/SELinux did correctly set the socket's on-the-wire label it was promptly cleared by the network stack and reset based on the IP options of the remote peer. This patch, in conjunction with a prior patch that adjusted the LSM hook locations, works to set the correct on-the-wire label format for new incoming connections through the security_inet_conn_request() hook. Besides the correct behavior there are many advantages to this change, the most significant is that all of the NetLabel socket labeling code in SELinux now lives in hooks which can return error codes to the core stack which allows us to finally get ride of the selinux_netlbl_inode_permission() logic which greatly simplfies the NetLabel/SELinux glue code. In the process of developing this patch I also ran into a small handful of AF_INET6 cleanliness issues that have been fixed which should make the code safer and easier to extend in the future. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-12-31netlabel: Update kernel configuration APIPaul Moore
Update the NetLabel kernel API to expose the new features added in kernel releases 2.6.25 and 2.6.28: the static/fallback label functionality and network address based selectors. Signed-off-by: Paul Moore <paul.moore@hp.com>
2008-10-10netlabel: Add configuration support for local labelingPaul Moore
Add the necessary NetLabel support for the new CIPSO mapping, CIPSO_V4_MAP_LOCAL, which allows full LSM label/context support. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Changes to the NetLabel security attributes to allow LSMs to pass ↵Paul Moore
full contexts This patch provides support for including the LSM's secid in addition to the LSM's MLS information in the NetLabel security attributes structure. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org>
2008-10-10selinux: Set socket NetLabel based on connection endpointPaul Moore
Previous work enabled the use of address based NetLabel selectors, which while highly useful, brought the potential for additional per-packet overhead when used. This patch attempts to solve that by applying NetLabel socket labels when sockets are connect()'d. This should alleviate the per-packet NetLabel labeling for all connected sockets (yes, it even works for connected DGRAM sockets). Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Add functionality to set the security attributes of a packetPaul Moore
This patch builds upon the new NetLabel address selector functionality by providing the NetLabel KAPI and CIPSO engine support needed to enable the new packet-based labeling. The only new addition to the NetLabel KAPI at this point is shown below: * int netlbl_skbuff_setattr(skb, family, secattr) ... and is designed to be called from a Netfilter hook after the packet's IP header has been populated such as in the FORWARD or LOCAL_OUT hooks. This patch also provides the necessary SELinux hooks to support this new functionality. Smack support is not currently included due to uncertainty regarding the permissions needed to expand the Smack network access controls. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Add network address selectors to the NetLabel/LSM domain mappingPaul Moore
This patch extends the NetLabel traffic labeling capabilities to individual packets based not only on the LSM domain but the by the destination address as well. The changes here only affect the core NetLabel infrastructre, changes to the NetLabel KAPI and individial protocol engines are also required but are split out into a different patch to ease review. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-10-10selinux: Fix missing calls to netlbl_skbuff_err()Paul Moore
At some point I think I messed up and dropped the calls to netlbl_skbuff_err() which are necessary for CIPSO to send error notifications to remote systems. This patch re-introduces the error handling calls into the SELinux code. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org>
2008-10-10netlabel: Remove unneeded in-kernel API functionsPaul Moore
After some discussions with the Smack folks, well just Casey, I now have a better idea of what Smack wants out of NetLabel in the future so I think it is now safe to do some API "pruning". If another LSM comes along that needs this functionality we can always add it back in, but I don't see any LSMs on the horizon which might make use of these functions. Thanks to Rami Rosen who suggested removing netlbl_cfg_cipsov4_del() back in February 2008. Signed-off-by: Paul Moore <paul.moore@hp.com> Reviewed-by: James Morris <jmorris@namei.org>
2008-04-28Audit: collect sessionid in netlink messagesEric Paris
Previously I added sessionid output to all audit messages where it was available but we still didn't know the sessionid of the sender of netlink messages. This patch adds that information to netlink messages so we can audit who sent netlink messages. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-12NetLabel: Allow passing the LSM domain as a shared pointerPaul Moore
Smack doesn't have the need to create a private copy of the LSM "domain" when setting NetLabel security attributes like SELinux, however, the current NetLabel code requires a private copy of the LSM "domain". This patches fixes that by letting the LSM determine how it wants to pass the domain value. * NETLBL_SECATTR_DOMAIN_CPY The current behavior, NetLabel assumes that the domain value is a copy and frees it when done * NETLBL_SECATTR_DOMAIN New, Smack-friendly behavior, NetLabel assumes that the domain value is a reference to a string managed by the LSM and does not free it when done Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05NetLabel: introduce a new kernel configuration API for NetLabelPaul Moore
Add a new set of configuration functions to the NetLabel/LSM API so that LSMs can perform their own configuration of the NetLabel subsystem without relying on assistance from userspace. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30NetLabel: Introduce static network labels for unlabeled connectionsPaul Moore
Most trusted OSs, with the exception of Linux, have the ability to specify static security labels for unlabeled networks. This patch adds this ability to the NetLabel packet labeling framework. If the NetLabel subsystem is called to determine the security attributes of an incoming packet it first checks to see if any recognized NetLabel packet labeling protocols are in-use on the packet. If none can be found then the unlabled connection table is queried and based on the packets incoming interface and address it is matched with a security label as configured by the administrator using the netlabel_tools package. The matching security label is returned to the caller just as if the packet was explicitly labeled using a labeling protocol. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30NetLabel: Add IP address family information to the netlbl_skbuff_getattr() ↵Paul Moore
function In order to do any sort of IP header inspection of incoming packets we need to know which address family, AF_INET/AF_INET6/etc., it belongs to and since the sk_buff structure does not store this information we need to pass along the address family separate from the packet itself. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-01-30NetLabel: Add secid token support to the NetLabel secattr structPaul Moore
This patch adds support to the NetLabel LSM secattr struct for a secid token and a type field, paving the way for full LSM/SELinux context support and "static" or "fallback" labels. In addition, this patch adds a fair amount of documentation to the core NetLabel structures used as part of the NetLabel kernel API. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2007-08-02SELinux: restore proper NetLabel caching behaviorPaul Moore
A small fix to the SELinux/NetLabel glue code to ensure that the NetLabel cache is utilized when possible. This was broken when the SELinux/NetLabel glue code was reorganized in the last kernel release. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2007-07-19SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcementPaul Moore
Create a new NetLabel KAPI interface, netlbl_enabled(), which reports on the current runtime status of NetLabel based on the existing configuration. LSMs that make use of NetLabel, i.e. SELinux, can use this new function to determine if they should perform NetLabel access checks. This patch changes the NetLabel/SELinux glue code such that SELinux only enforces NetLabel related access checks when netlbl_enabled() returns true. At present NetLabel is considered to be enabled when there is at least one labeled protocol configuration present. The result is that by default NetLabel is considered to be disabled, however, as soon as an administrator configured a CIPSO DOI definition NetLabel is enabled and SELinux starts enforcing NetLabel related access controls - including unlabeled packet controls. This patch also tries to consolidate the multiple "#ifdef CONFIG_NETLABEL" blocks into a single block to ease future review as recommended by Linus. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2007-06-08[NetLabel]: consolidate the struct socket/sock handling to just struct sockPaul Moore
The current NetLabel code has some redundant APIs which allow both "struct socket" and "struct sock" types to be used; this may have made sense at some point but it is wasteful now. Remove the functions that operate on sockets and convert the callers. Not only does this make the code smaller and more consistent but it pushes the locking burden up to the caller which can be more intelligent about the locks. Also, perform the same conversion (socket to sock) on the SELinux/NetLabel glue code where it make sense. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02NetLabel: convert to an extensibile/sparse category bitmapPaul Moore
The original NetLabel category bitmap was a straight char bitmap which worked fine for the initial release as it only supported 240 bits due to limitations in the CIPSO restricted bitmap tag (tag type 0x01). This patch converts that straight char bitmap into an extensibile/sparse bitmap in order to lay the foundation for other CIPSO tag types and protocols. This patch also has a nice side effect in that all of the security attributes passed by NetLabel into the LSM are now in a format which is in the host's native byte/bit ordering which makes the LSM specific code much simpler; look at the changes in security/selinux/ss/ebitmap.c as an example. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: make netlbl_lsm_secattr struct easier/quicker to understandPaul Moore
The existing netlbl_lsm_secattr struct required the LSM to check all of the fields to determine if any security attributes were present resulting in a lot of work in the common case of no attributes. This patch adds a 'flags' field which is used to indicate which attributes are present in the structure; this should allow the LSM to do a quick comparison to determine if the structure holds any security attributes. Example: if (netlbl_lsm_secattr->flags) /* security attributes present */ else /* NO security attributes present */ Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: change netlbl_secattr_init() to return voidPaul Moore
The netlbl_secattr_init() function would always return 0 making it pointless to have a return value. This patch changes the function to return void. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: use gfp_t instead of int where it makes sensePaul Moore
There were a few places in the NetLabel code where the int type was being used instead of the gfp_t type, this patch corrects this mistake. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-10-15[PATCH] gfp_t in netlabelAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11NetLabel: fix a cache race conditionpaul.moore@hp.com
Testing revealed a problem with the NetLabel cache where a cached entry could be freed while in use by the LSM layer causing an oops and other problems. This patch fixes that problem by introducing a reference counter to the cache entry so that it is only freed when it is no longer in use. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-09-29[NetLabel]: audit fixups due to delayed feedbackPaul Moore
Fix some issues Steve Grubb had with the way NetLabel was using the audit subsystem. This should make NetLabel more consistent with other kernel generated audit messages specifying configuration changes. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[NetLabel]: add audit support for configuration changesPaul Moore
This patch adds audit support to NetLabel, including six new audit message types shown below. #define AUDIT_MAC_UNLBL_ACCEPT 1406 #define AUDIT_MAC_UNLBL_DENY 1407 #define AUDIT_MAC_CIPSOV4_ADD 1408 #define AUDIT_MAC_CIPSOV4_DEL 1409 #define AUDIT_MAC_MAP_ADD 1410 #define AUDIT_MAC_MAP_DEL 1411 Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-25[NetLabel]: rework the Netlink attribute handling (part 1)Paul Moore
At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes to better follow the common Netlink attribute usage. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>