summaryrefslogtreecommitdiff
path: root/include/net/cfg80211.h
AgeCommit message (Collapse)Author
2009-08-20cfg80211: fix dangling scan request checkingJohannes Berg
My patch "cfg80211: fix deadlock" broke the code it was supposed to fix, the scan request checking. But it's not trivial to put it back the way it was, since the original patch had a deadlock. Now do it in a completely new way: queue the check off to a work struct, where we can freely lock. But that has some more complications, like needing to wait for it to be done before the wiphy/rdev can be destroyed, so some code is required to handle that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: allow driver to override PS defaultJohannes Berg
Sometimes drivers might have a good reason to override the PS default, like iwlwifi right now where it affects RX performance significantly at this point. This will allow them to override the default, if desired, in a way that users can still change it according to their trade-off choices, not the driver's, like would happen if the driver just disabled PS completely then. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14mac80211: remove max_bandwidthPat Erley
This removes the max_bandwidth attribute. It is only ever written to, and is duplicated by max_bandwidth_khz in the regulatory code. Signed-off-by: Pat Erley <pat-lkml@erley.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: fix alignment problem in scan requestJohannes Berg
The memory layout for scan requests was rather wrong, we put the scan SSIDs before the channels which could lead to the channel pointers being unaligned in memory. It turns out that using a pointer to the channel array isn't necessary anyway since we can embed a zero-length array into the struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14nl80211: add generation number to all dumpsJohannes Berg
In order for userspace to be able to figure out whether it obtained a consistent snapshot of data or not when using netlink dumps, we need to have a generation number in each dump message that indicates whether the list has changed or not -- its value is arbitrary. This patch adds such a number to all dumps, this needs some mac80211 involvement to keep track of a generation number to start with when adding/removing mesh paths or stations. The wiphy and netdev lists can be fully handled within cfg80211, of course, but generation numbers need to be stored there as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14cfg80211: use reassociation when possibleJohannes Berg
With the move of everything related to the SME from mac80211 to cfg80211, we lost the ability to send reassociation frames. This adds them back, but only for wireless extensions. With the userspace SME, it shall control assoc vs. reassoc (it already can do so with the nl80211 interface). I haven't touched the connect() implementation, so it is not possible to reassociate with the nl80211 connect primitive. I think that should be done with the NL80211_CMD_ROAM command, but we'll have to see how that can be handled in the future, especially with fullmac chips. This patch addresses only the immediate regression we had in mac80211, which previously sent reassoc. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04cfg80211: enable country IE support to all cfg80211 driversLuis R. Rodriguez
Since the bss is always set now once we are connected, if the bss has its own information element we refer to it and pass that instead of relying on mac80211's parsing. Now all cfg80211 drivers get country IE support, automatically and we reduce the call overhead that we had on mac80211 which called this upon every beacon and instead now call this only upon a successfull connection by a STA on cfg80211. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03cfg80211: fix regression on beacon world roaming featureLuis R. Rodriguez
A regression was added through patch a4ed90d6: "cfg80211: respect API on orig_flags on channel for beacon hint" We did indeed respect _orig flags but the intention was not clearly stated in the commit log. This patch fixes firmware issues picked up by iwlwifi when we lift passive scan of beaconing restrictions on channels its EEPROM has been configured to always enable. By doing so though we also disallowed beacon hints on devices registering their wiphy with custom world regulatory domains enabled, this happens to be currently ath5k, ath9k and ar9170. The passive scan and beacon restrictions on those devices would never be lifted even if we did find a beacon and the hardware did support such enhancements when world roaming. Since Johannes indicates iwlwifi firmware cannot be changed to allow beacon hinting we set up a flag now to specifically allow drivers to disable beacon hints for devices which cannot use them. We enable the flag on iwlwifi to disable beacon hints and by default enable it for all other drivers. It should be noted beacon hints lift passive scan flags and beacon restrictions when we receive a beacon from an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz band. We don't bother with channels 1-11 as those channels are allowed world wide. This should fix world roaming for ath5k, ath9k and ar9170, thereby improving scan time when we receive the first beacon from any AP, and also enabling beaconing operation (AP/IBSS/Mesh) on cards which would otherwise not be allowed to do so. Drivers not using custom regulatory stuff (wiphy_apply_custom_regulatory()) were not affected by this as the orig_flags for the channels would have been cleared upon wiphy registration. I tested this with a world roaming ath5k card. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWESSID handlersJohannes Berg
Since we now have handlers IWESSID for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWAP handlersJohannes Berg
Since we now have IWAP handlers for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine iwfreq implementationsJohannes Berg
Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27cfg80211: make aware of net namespacesJohannes Berg
In order to make cfg80211/nl80211 aware of network namespaces, we have to do the following things: * del_virtual_intf method takes an interface index rather than a netdev pointer - simply change this * nl80211 uses init_net a lot, it changes to use the sender's network namespace * scan requests use the interface index, hold a netdev pointer and reference instead * we want a wiphy and its associated virtual interfaces to be in one netns together, so - we need to be able to change ns for a given interface, so export dev_change_net_namespace() - for each virtual interface set the NETIF_F_NETNS_LOCAL flag, and clear that flag only when the wiphy changes ns, to disallow breaking this invariant * when a network namespace goes away, we need to reparent the wiphy to init_net * cfg80211 users that support creating virtual interfaces must create them in the wiphy's namespace, currently this affects only mac80211 The end result is that you can now switch an entire wiphy into a different network namespace with the new command iw phy#<idx> set netns <pid> and all virtual interfaces will follow (or the operation fails). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: update misleading commentHelmut Schaa
In cfg80211_scan_request n_channels refers to the total number of channels to scan. Update the misleading comment accordingly. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: rework key operationJohannes Berg
This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: fix lockingJohannes Berg
Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: mlme API must be able to sleepJohannes Berg
After the mac80211 mlme cleanup, we can require that the MLME functions in cfg80211 can sleep. This will simplify future work in cfg80211 a lot. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: dont use union for wextJohannes Berg
Otherwise it becomes very hard to reset the structs correctly since wext can be configured while the interface is down. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: let SME control reassociation vs. associationJohannes Berg
Since we don't really know that well in the kernel, let's let the SME control whether it wants to use reassociation or not, by allowing it to give the previous BSSID in the associate() parameters. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: keep track of BSSesJohannes Berg
In order to avoid problems with BSS structs going away while they're in use, I've long wanted to make cfg80211 keep track of them. Without the SME, that wasn't doable but now that we have the SME we can do this too. It can keep track of up to four separate authentications and one association, regardless of whether it's controlled by the cfg80211 SME or the userspace SME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: assimilate and export ieee80211_bss_get_ieJohannes Berg
This function from mac80211 seems generally useful, and I will need it in cfg80211 soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement get_wireless_statsJohannes Berg
By dropping the noise reporting, we can implement wireless stats in cfg80211. We also make the handler return NULL if we have no information, which is possible thanks to the recent wext change. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement IWRATEJohannes Berg
For now, let's implement that using a very hackish way: simply mirror the wext API in the cfg80211 API. This will have to be changed later when we implement proper bitrate API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement IWAP for WDSJohannes Berg
This implements siocsiwap/giwap for WDS mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: implement iwpowerJohannes Berg
Just on/off and timeout, and with a hacky cfg80211 method until we figure out what we want, though this is probably sufficient as we want to use pm_qos for wifi everywhere. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: managed mode wext compatibilityJohannes Berg
This adds code to make it possible to use the cfg80211 connect() API with wireless extensions, and because the previous patch added emulation of that API with auth() and assoc(), by extension also supports wext on that. At the same time, removes code from mac80211 for wext, but doesn't yet clean up mac80211's mlme code more. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: emulate connect with auth/assocJohannes Berg
This adds code to cfg80211 so that drivers (mac80211 right now) that don't implement connect but rather auth/assoc can still be used with the nl80211 connect command. This will also be necessary for the wext compat code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: connect/disconnect APISamuel Ortiz
This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: introduce nl80211 testmode commandJohannes Berg
This introduces a new NL80211_CMD_TESTMODE for testing and calibration use with nl80211. There's no multiplexing like like iwpriv had, and the command is not available by default, it needs to be explicitly enabled in Kconfig and shouldn't be enabled in most kernels. The command requires a wiphy index or interface index to identify the device to operate on, and the new TESTDATA attribute. There also is API for sending replies to the command, and testmode multicast messages (on a testmode multicast group). I've also updated mac80211 to be able to pass through the command to the driver, since it itself doesn't implement the testmode command. Additionally, to give people an idea of how to use the command, I've added a little code to hwsim that makes use of the new command to set the powersave mode, this is currently done via debugfs and should remain there, and the testmode command only serves as an example of how to use this best -- with nested netlink attributes in the TESTDATA attribute. A hwsim testmode tool can be found at http://git.sipsolutions.net/hwsim.git/. This tool is BSD licensed so people can easily use it as a basis for their own internal fabrication and validation tools. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: remove wireless_dev->bssidJohannes Berg
This variable isn't necessary -- the wext code keeps track of the BSSID itself, and otherwise we have current_bss. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: use proper allocation flagsJohannes Berg
Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: add wrapper function to get wiphy from priv pointerDavid Kilroy
Signed-off-by: David Kilroy <kilroyd@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10cfg80211: pass netdev to change_virtual_intfJohannes Berg
If there was a reason I'm passing the ifidx I cannot remember it any more and don't see one now, so let's just pass the pointer itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: add rfkill supportJohannes Berg
To be easier on drivers and users, have cfg80211 register an rfkill structure that drivers can access. When soft-killed, simply take down all interfaces; when hard-killed the driver needs to notify us and we will take down the interfaces after the fact. While rfkilled, interfaces cannot be set UP. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: move txpower wext from mac80211Johannes Berg
This patch introduces new cfg80211 API to set the TX power via cfg80211, puts the wext code into cfg80211 and updates mac80211 to use all that. The -ENETDOWN bits are a hack but will go away soon. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22wireless: move some utility functions from mac80211 to cfg80211Zhu Yi
The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20cfg80211: allow wext to remove keys that don't existJohannes Berg
Some applications using wireless extensions expect to be able to remove a key that doesn't exist. One example is wpa_supplicant which doesn't actually change behaviour when running into an error while trying to do that, but it prints an error message which users interpret as wpa_supplicant having problems. The safe thing to do is not change the behaviour of wireless extensions any more, so when the driver reports -ENOENT let the wext bridge code return success to userspace. To guarantee this, also document that drivers should return -ENOENT when the key doesn't exist. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20cfg80211: mark wiphy->privid as pointer to constDavid Kilroy
This allows drivers to use a const pointer as the privid without a cast. Signed-off-by: David Kilroy <kilroyd@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20cfg80211: mark ops as pointer to constDavid Kilroy
This allows drivers to mark their cfg80211_ops tables const. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20wireless: rename IEEE80211_CHAN_NO_FAT_* to HT40-/+Luis R. Rodriguez
This is more consistent with our nl80211 naming convention for HT40-/+. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20cfg80211: Process regulatory max bandwidth checks for HT40Luis R. Rodriguez
We are not correctly listening to the regulatory max bandwidth settings. To actually make use of it we need to redesign things a bit. This patch does the work for that. We do this to so we can obey to regulatory rules accordingly for use of HT40. We end up dealing with HT40 by having two passes for each channel. The first check will see if a 20 MHz channel fits into the channel's center freq on a given frequency range. We check for a 20 MHz banwidth channel as that is the maximum an individual channel will use, at least for now. The first pass will go ahead and check if the regulatory rule for that given center of frequency allows 40 MHz bandwidths and we use this to determine whether or not the channel supports HT40 or not. So to support HT40 you'll need at a regulatory rule that allows you to use 40 MHz channels but you're channel must also be enabled and support 20 MHz by itself. The second pass is done after we do the regulatory checks over an device's supported channel list. On each channel we'll check if the control channel and the extension both: o exist o are enabled o regulatory allows 40 MHz bandwidth on its frequency range This work allows allows us to idependently check for HT40- and HT40+. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: Add IEEE 802.1X PAE control for station modeJouni Malinen
Add a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to allow user space to indicate that it will control the IEEE 802.1X port in station mode. Previously, mac80211 was always marking the port authorized in station mode. This was enough when drop_unencrypted flag was set. However, drop_unencrypted can currently be controlled only with WEXT and the current nl80211 design does not allow fully secure configuration. Fix this by providing a mechanism for user space to control the IEEE 802.1X port in station mode (i.e., do the same that we are already doing in AP mode). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13nl80211: improve station flags handlingJohannes Berg
It is currently not possible to modify station flags, but that capability would be very useful. This patch introduces a new nl80211 attribute that contains a set/mask for station flags, and updates the internal API (and mac80211) to mirror that. The new attribute is parsed before falling back to the old so that userspace can specify both (if it can) to work on all kernels. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-13cfg80211: implement wext key handlingJohannes Berg
Move key handling wireless extension ioctls from mac80211 to cfg80211 so that all drivers that implement the cfg80211 operations get wext compatibility. Note that this drops the SIOCGIWENCODE ioctl support for getting IW_ENCODE_RESTRICTED/IW_ENCODE_OPEN. This means that iwconfig will no longer report "Security mode:open" or "Security mode:restricted" for mac80211. However, what we displayed there (the authentication algo used) was actually wrong -- linux/wireless.h states that this setting is meant to differentiate between "Refuse non-encoded packets" and "Accept non-encoded packets". (Combined with "cfg80211: fix a couple of bugs with key ioctls". -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11cfg80211: put wext data into substructureJohannes Berg
To make it more apparent in the code what is for wext only (and needs to be #ifdef'ed) put all the info for wext into a substruct in each wireless_dev. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11cfg80211: constify key mac address in opsJohannes Berg
The address pointed to by mac_addr can be marked as const. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11nl80211 : Add support for configuring MFPJouni Malinen
NL80211_CMD_ASSOCIATE request must be able to indicate whether management frame protection (IEEE 802.11w) is being used. mac80211 was able to use MFP in client mode only with WEXT, but the new NL80211_ATTR_USE_MFP attribute will allow this to be done with nl80211, too. Since we are currently using nl80211 for MFP only with drivers that use user space SME, only MFP disabled and required values are used. However, the NL80211_ATTR_USE_MFP attribute is an enum that can be extended with MFP optional in the future, if that is needed with some drivers (e.g., if the RSN IE is generated by the driver). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Add event for authentication/association timeoutJouni Malinen
SME needs to be notified when the authentication or association attempt times out and MLME has stopped processing in order to allow the SME to decide what to do next. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: allow configuring IBSS beacon intervalJohannes Berg
Make the JOIN_IBSS command look at the beacon interval attribute to see if the user requested a specific beacon interval, if not default to 100 TU (wext too). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Add set/get for frag/rts threshold and retry limitsJouni Malinen
Add new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY and NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and retry limits. Since these values are stored in struct wiphy, remove the local copy from mac80211 where feasible (frag & rts threshold). The retry limits are currently needed in struct ieee80211_conf, but these could be eventually removed since the driver should have access to the values in struct wiphy. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>