summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2021-04-28Merge tag 'media/v5.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - addition of a maintainer's profile for the media subsystem - addition of i.MX8 IP support - qcom/camss gained support for hardware version Titan 170 - new RC keymaps - Lots of other improvements, cleanups and bug fixes * tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits) media: coda: fix macroblocks count control usage media: rkisp1: params: fix wrong bits settings media: cedrus: Fix H265 status definitions media: meson-ge2d: fix rotation parameters media: v4l2-ctrls: fix reference to freed memory media: venus : hfi: add venus image info into smem media: venus: Fix internal buffer size calculations for v6. media: venus: helpers: keep max bandwidth when mbps exceeds the supported range media: venus: fix hw overload error log condition media: venus: core: correct firmware name for sm8250 media: venus: core,pm: fix potential infinite loop media: venus: core: Fix kerneldoc warnings media: gscpa/stv06xx: fix memory leak media: cx25821: remove unused including <linux/version.h> media: staging: media/meson: remove redundant dev_err call media: adv7842: support 1 block EDIDs, fix clearing EDID media: adv7842: configure all pads media: allegro: change kernel-doc comment blocks to normal comments media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init() media: i2c: rdamc21: Fix warning on u8 cast ...
2021-04-15media: v4l2-ctrls: fix reference to freed memoryHans Verkuil
When controls are used together with the Request API, then for each request a v4l2_ctrl_handler struct is allocated. This contains the controls that can be set in a request. If a control is *not* set in the request, then the value used in the most recent previous request must be used, or the current value if it is not found in any outstanding requests. The framework tried to find such a previous request and it would set the 'req' pointer in struct v4l2_ctrl_ref to the v4l2_ctrl_ref of the control in such a previous request. So far, so good. However, when that previous request was applied to the hardware, returned to userspace, and then userspace would re-init or free that request, any 'ref' pointer in still-queued requests would suddenly point to freed memory. This was not noticed before since the drivers that use this expected that each request would always have the controls set, so there was never any need to find a control in older requests. This requirement was relaxed, and now this bug surfaced. It was also made worse by changeset 2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req") which increased the chance of this happening. The use of the 'req' pointer in v4l2_ctrl_ref was very fragile, so drop this entirely. Instead add a valid_p_req bool to indicate that p_req contains a valid value for this control. And if it is false, then just use the current value of the control. Note that VIDIOC_G_EXT_CTRLS will always return -EACCES when attempting to get a control from a request until the request is completed. And in that case, all controls in the request will have the control value set (i.e. valid_p_req is true). This means that the whole 'find the most recent previous request containing a control' idea is pointless, and the code can be simplified considerably. The v4l2_g_ext_ctrls_common() function was refactored a bit to make it more understandable. It also avoids updating volatile controls in a completed request since that was already done when the request was completed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 2fae4d6aabc8 ("media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->req") Fixes: 6fa6f831f095 ("media: v4l2-ctrls: add core request support") Cc: <stable@vger.kernel.org> # for v5.9 and up Tested-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-09media: rc: add keymaps for mecool-kii-pro/kiii-pro remotesChristian Hewitt
Add keymaps and bindings for the simple IR (NEC) remotes used with the MeCool KII-Pro and MeCool KIII-Pro Android STB devices. Tested-by: Drazen Spio <drazsp@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l: Add HDR10 static metadata controlsStanimir Varbanov
Introduce Content light level and Mastering display colour volume Colorimetry compound controls with relevant payload structures and validation. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l: fwnode: Rename v4l2_async_register_subdev_sensor_commonSakari Ailus
Rename v4l2_async_register_subdev_sensor_common as v4l2_async_register_subdev_sensor. This is a part of the effort to make the long names present in V4L2 fwnode and async frameworks shorter. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: v4l: fwnode: Rename and make static V4L2 async notifier helperSakari Ailus
Rename v4l2_async_notifier_parse_fwnode_sensor_common() as v4l2_async_notifier_parse_fwnode_sensor() and make the function static, as it's not used by a driver and maybe never will. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: entity: Add lockdep check to media graph walkSakari Ailus
It was always assumed that walking the media graph would require holding the media_device graph_mutex but this was not documented nor checked for. Add a lockdep check to graph walk init and iter, and document the need for acquiring the graph_mutex. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-04-06media: entity: A typo fixBhaskar Chowdhury
s/cariers/carriers/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: videobuf2: Explicitly state max size of planesRicardo Ribalda
The plane size needs to be PAGE_ALIGNED, so it is not possible to have sizes bigger than MAX_INT - PAGE_SIZE. We already check for overflows when that happen: if (size < vb->planes[plane].length) goto free; But it is good to explicitly state our max allowed value, in order to align with the driver expectations. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: Add parsing for APP14 data segment in jpeg helpersMirela Rabulea
According to Rec. ITU-T T.872 (06/2012) 6.5.3 APP14 segment is for color encoding, it contains a transform flag, which may have values of 0, 1 and 2 and are interpreted as follows: 0 - CMYK for images that are encoded with four components - RGB for images that are encoded with three components 1 - An image encoded with three components using YCbCr colour encoding. 2 - An image encoded with four components using YCCK colour encoding. This is used in imx-jpeg decoder, to distinguish between YUV444 and RGB24. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: vpbe_osd.h/uvcvideo.h includes: fix trivial kernel-doc warningsHans Verkuil
Fix these kernel-doc warnings: include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCBCRI' not described in enum 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Enum value 'PIXFMT_YCRCBI' not described in enum 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCrCbI' description in 'osd_pix_format' include/media/davinci/vpbe_osd.h:77: warning: Excess enum value 'PIXFMT_YCbCrI' description in 'osd_pix_format' include/media/davinci/vpbe_osd.h:232: warning: expecting prototype for enum davinci_cursor_v_width. Prototype was for enum osd_cursor_v_width instead include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'ns' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'sof' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'length' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'flags' not described in 'uvc_meta_buf' include/uapi/linux/uvcvideo.h:98: warning: Function parameter or member 'buf' not described in 'uvc_meta_buf' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: media/i2c: fix kerneldoc issues for media i2c headersHans Verkuil
This fixes these kernel-doc warnings: include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI2C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_CVBS_VI4A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2A_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2B_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI2C_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI1C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3A' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3B' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_SVIDEO_VI4A_VI3C' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:70: warning: Enum value 'INPUT_INVALID' not described in enum 'tvp514x_input' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_EMBEDDED_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_20BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_10BIT_422_SEPERATE_SYNC' not described in enum 'tvp514x_output' include/media/i2c/tvp514x.h:82: warning: Enum value 'OUTPUT_INVALID' not described in enum 'tvp514x_output' include/media/i2c/adv7343.h:38: warning: cannot understand function prototype: 'struct adv7343_power_mode ' include/media/i2c/s5k4ecgx.h:31: warning: expecting prototype for struct ss5k4ecgx_platform_data. Prototype was for struct s5k4ecgx_platform_data instead include/media/i2c/mt9t112.h:21: warning: cannot understand function prototype: 'struct mt9t112_platform_data ' include/media/i2c/noon010pc30.h:13: warning: Cannot understand * @clk_rate: the clock frequency in Hz include/media/i2c/s5k6aa.h:45: warning: Function parameter or member 'bus_type' not described in 's5k6aa_platform_data' include/media/i2c/tw9910.h:19: warning: cannot understand function prototype: 'enum tw9910_mpout_pin ' include/media/i2c/tw9910.h:36: warning: cannot understand function prototype: 'struct tw9910_video_info ' include/media/i2c/ov772x.h:53: warning: cannot understand function prototype: 'struct ov772x_camera_info ' include/media/i2c/s5c73m3.h:53: warning: Function parameter or member 'bus_type' not described in 's5c73m3_platform_data' drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'post_streamoff' not described in 'ccs_quirk' drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Function parameter or member 'flags' not described in 'ccs_quirk' drivers/media/i2c/ccs/ccs-data.h:144: warning: expecting prototype for struct ccs_pdaf_pix_loc_block_desc. Prototype was for struct ccs_pdaf_pix_loc_pixel_desc instead drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'token' not described in 'tvp514x_reg' drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'reg' not described in 'tvp514x_reg' drivers/media/i2c/tvp514x_regs.h:272: warning: Function parameter or member 'val' not described in 'tvp514x_reg' drivers/media/i2c/m5mols/m5mols.h:69: warning: Function parameter or member 'brightness' not described in 'm5mols_exif' drivers/media/i2c/m5mols/m5mols.h:147: error: Cannot parse struct or union! drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN0' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN1' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN2' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN3' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN4' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN5' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN6' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_AIN7' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_HDMI' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TTL' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXA' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_TXB' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:65: warning: Enum value 'ADV748X_PORT_MAX' not described in enum 'adv748x_ports' drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'i2c_clients' not described in 'adv748x_state' drivers/media/i2c/adv748x/adv748x.h:199: warning: Function parameter or member 'regmap' not described in 'adv748x_state' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: core headers: fix kernel-doc warningsHans Verkuil
This patch fixes the following kernel-doc warnings: include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'm' not described in 'v4l2_plane' include/uapi/linux/videodev2.h:996: warning: Function parameter or member 'reserved' not described in 'v4l2_plane' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'm' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved2' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1057: warning: Function parameter or member 'reserved' not described in 'v4l2_buffer' include/uapi/linux/videodev2.h:1068: warning: Function parameter or member 'tv' not described in 'v4l2_timeval_to_ns' include/uapi/linux/videodev2.h:1068: warning: Excess function parameter 'ts' description in 'v4l2_timeval_to_ns' include/uapi/linux/videodev2.h:1138: warning: Function parameter or member 'reserved' not described in 'v4l2_exportbuffer' include/uapi/linux/videodev2.h:2237: warning: Function parameter or member 'reserved' not described in 'v4l2_plane_pix_format' include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'hsv_enc' not described in 'v4l2_pix_format_mplane' include/uapi/linux/videodev2.h:2270: warning: Function parameter or member 'reserved' not described in 'v4l2_pix_format_mplane' include/uapi/linux/videodev2.h:2281: warning: Function parameter or member 'reserved' not described in 'v4l2_sdr_format' include/uapi/linux/videodev2.h:2315: warning: Function parameter or member 'fmt' not described in 'v4l2_format' include/uapi/linux/v4l2-subdev.h:53: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_format' include/uapi/linux/v4l2-subdev.h:66: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_crop' include/uapi/linux/v4l2-subdev.h:89: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_mbus_code_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_width' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_width' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'min_height' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'max_height' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:108: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_size_enum' include/uapi/linux/v4l2-subdev.h:119: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval' include/uapi/linux/v4l2-subdev.h:140: warning: Function parameter or member 'reserved' not described in 'v4l2_subdev_frame_interval_enum' include/uapi/linux/cec.h:406: warning: Function parameter or member 'raw' not described in 'cec_connector_info' include/uapi/linux/cec.h:470: warning: Function parameter or member 'flags' not described in 'cec_event' include/media/v4l2-h264.h:82: warning: Function parameter or member 'reflist' not described in 'v4l2_h264_build_p_ref_list' include/media/v4l2-h264.h:82: warning: expecting prototype for v4l2_h264_build_b_ref_lists(). Prototype was for v4l2_h264_build_p_ref_list() instead include/media/cec.h:50: warning: Function parameter or member 'lock' not described in 'cec_devnode' include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dht' not described in 'v4l2_jpeg_header' include/media/v4l2-jpeg.h:122: warning: Function parameter or member 'num_dqt' not described in 'v4l2_jpeg_header' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: move VP8 stateless controls out of stagingEzequiel Garcia
Until now, the VP8 V4L2 API was not exported as a public API, and only defined in a private media header (media/vp8-ctrls.h). The reason for this was a concern about the API not complete and ready to support VP8 decoding hardware accelerators. After reviewing the VP8 specification in detail, and now that the API is able to support Cedrus and Hantro G1, we can consider this ready. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: vp8: Rename V4L2 VP8 specific macro to V4L2_VP8_Ezequiel Garcia
Before we move the VP8 controls to a stable public header, rename this macro so it's clearly V4L2-specific. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: Move the VP8 stateless control type out of stagingEzequiel Garcia
Move the VP8 stateless control types out of staging, and re-number it to avoid any confusion. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: Move parsed VP8 pixel format out of stagingEzequiel Garcia
Since we are ready to stabilize the VP8 stateless API, move the parsed VP8 pixel format. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: vp8: Add proper kernel-doc documentationEzequiel Garcia
In preparation for making the interface public, document all the structures. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: vp8: Rename v4l2_vp8_loopfilter to v4l2_vp8_loop_filterEzequiel Garcia
Rename to struct v4l2_vp8_loop_filter, which is closer to the VP8 syntax. This change is only cosmetics, but since this API is exposed to userspace, it's worth the trouble to get it consistent. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22media: uapi: vp8: Remove "header" from symbol names and macrosEzequiel Garcia
It doesn't seem to add any clarity to have a "header" suffix in controls, struct names and flags. Since this just makes names too long without any benefit, just drop it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: v4l2-mc: Add link flags to v4l2_create_fwnode_links_to_pad()Laurent Pinchart
Add a flags argument to the v4l2_create_fwnode_links_to_pad() function to specify the link flags. This allows drivers to create immutable links for instance. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: dvbdev: Switch to new kerneldoc syntax for named variable macro argumentJonathan Neuschäfer
The syntax without dots is available since commit 43756e347f21 ("scripts/kernel-doc: Add support for named variable macro arguments"). The same HTML output is produced with and without this patch. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: include: media: davinci: Fixed up few trivial spellings in the file ↵Bhaskar Chowdhury
isif.h Several spelling fixes throughout the file. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc: add keymap for Xbox 360 Universal Media remoteBastien Nocera
Captured using a raw IR receiver. Manual linked in the remote definition itself. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc: add keymap for minix-neo remoteChristian Hewitt
Add a keymap and bindings for the simple IR (NEC) remote used with Minix 'NEO' branded Android STB devices. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-11media: rc: compile rc-cec.c into rc-coreHans Verkuil
The rc-cec keymap is unusual in that it can't be built as a module, instead it is registered directly in rc-main.c if CONFIG_MEDIA_CEC_RC is set. This is because it can be called from drm_dp_cec_set_edid() via cec_register_adapter() in an asynchronous context, and it is not allowed to use request_module() to load rc-cec.ko in that case. Trying to do so results in a 'WARN_ON_ONCE(wait && current_is_async())'. Since this keymap is only used if CONFIG_MEDIA_CEC_RC is set, we just compile this keymap into the rc-core module and never as a separate module. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 2c6d1fffa1d9 (drm: add support for DisplayPort CEC-Tunneling-over-AUX) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-22Merge tag 'topic/iomem-mmap-vs-gup-2021-02-22' of ↵Linus Torvalds
git://anongit.freedesktop.org/drm/drm Pull follow_pfn() updates from Daniel Vetter: "Fixes around VM_FPNMAP and follow_pfn: - replace mm/frame_vector.c by get_user_pages in misc/habana and drm/exynos drivers, then move that into media as it's sole user - close race in generic_access_phys - s390 pci ioctl fix of this series landed in 5.11 already - properly revoke iomem mappings (/dev/mem, pci files)" * tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm: PCI: Revoke mappings like devmem PCI: Also set up legacy files only after sysfs init sysfs: Support zapping of binary attr mmaps resource: Move devmem revoke code to resource framework /dev/mem: Only set filp->f_mapping PCI: Obey iomem restrictions for procfs mmap mm: Close race in generic_access_phys media: videobuf2: Move frame_vector into media subsystem mm/frame-vector: Use FOLL_LONGTERM misc/habana: Use FOLL_LONGTERM for userptr misc/habana: Stop using frame_vector helpers drm/exynos: Use FOLL_LONGTERM for g2d cmdlists drm/exynos: Stop using frame_vector helpers
2021-02-15media: v4l: async: Fix kerneldoc documentation for async functionsSakari Ailus
Fix kerneldoc documentation for functions that add async sub-devices to notifiers. The functions themselves were improved recently but that left issues with the kerneldoc documentation. Fix them now. Also remove underscores from macro argument names. [mchehab: fix a build breakage] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b01edcbd409c ("media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() API") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: Remove the legacy v4l2-clk APIEzequiel Garcia
The V4L2 temporary clock helper API, was introduced in late 2012 and, as mentioned in the documentation, meant to be replaced by the generic clock API, once the generic clock framework became available on all relevant architectures. The generic clock API is a well-established API (since a few years now). The last few media capture drivers and sensors using v4l2-clk have been converted to the generic clock framework. We can now remove the v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: Clarify v4l2-async subdevice addition APIEzequiel Garcia
Now that most users of v4l2_async_notifier_add_subdev have been converted, let's fix the documentation so it's more clear how the v4l2-async API should be used. Document functions that drivers should use, and their purpose. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() APILaurent Pinchart
The functions that add an async subdev to an async subdev notifier take as an argument the size of the container structure they need to allocate. This is error prone, as passing an invalid size will not be caught by the compiler. Wrap those functions in macros that take a container type instead of a size, and cast the returned pointer to the desired type. The compiler will catch mistakes if the incorrect type is passed to the macro, as the assignment types won't match. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> (core+ti-cal) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Discourage use of v4l2_async_notifier_add_subdevEzequiel Garcia
Most -if not all- use-cases are expected to be covered by one of: v4l2_async_notifier_add_fwnode_subdev, v4l2_async_notifier_add_fwnode_remote_subdev or v4l2_async_notifier_add_i2c_subdev. We'd like to discourage drivers from using v4l2_async_notifier_add_subdev, so rename it as __v4l2_async_notifier_add_subdev. This is typically a good hint for drivers to avoid using the function. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: davinci: vpif_display: Remove unused v4l2-async codeEzequiel Garcia
There are no users for vpif_display_config.asd_sizes and vpif_display_config.asd members, which means the v4l2-async subdevices aren't being defined anywhere. Remove the v4l2-async, leaving only the synchronous setup. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia
Change v4l2_async_notifier_add_fwnode_remote_subdev semantics so it allocates the struct v4l2_async_subdev pointer. This makes the API consistent: the v4l2-async subdevice addition functions have now a unified usage model. This model is simpler, as it makes v4l2-async responsible for the allocation and release of the subdevice descriptor, and no longer something the driver has to worry about. On the user side, the change makes the API simpler for the drivers to use and less error-prone. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Remove V4L2_ASYNC_MATCH_DEVNAMEEzequiel Garcia
The last user for this type of match was the soc-camera/sh_mobile_csi2 driver, which was removed in v4.9. If the support is ever needed, it can always be restored. [Sakari Ailus: Also drop DEVNAME from debug prints recently added.] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-01Merge tag 'v5.11-rc6' into patchworkMauro Carvalho Chehab
Linux 5.11-rc6 * tag 'v5.11-rc6': (1466 commits) Linux 5.11-rc6 leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon dt-bindings: Cleanup standard unit properties soc: litex: Properly depend on HAS_IOMEM tty: avoid using vfs_iocb_iter_write() for redirected console writes null_blk: cleanup zoned mode initialization cifs: fix dfs domain referrals drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. io_uring: reinforce cancel on flush during exit cifs: returning mount parm processing errors correctly rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration ...
2021-01-27media: v4l2-async: Add waiting subdevices debugfsEzequiel Garcia
There is currently little to no information available about the reasons why a v4l2-async device hasn't probed completely. Inspired by the "devices_deferred" debugfs file, add a file to list information about the subdevices that are on waiting lists, for each notifier. This is useful to debug v4l2-async subdevices and notifiers, for instance when doing device bring-up. For instance, a typical output would be: $ cat /sys/kernel/debug/video4linux/pending_async_subdevices ipu1_csi1: [fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi1_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux ipu1_csi0: [fwnode] dev=20e0000.iomuxc-gpr:ipu1_csi0_mux, node=/soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux imx6-mipi-csi2: [fwnode] dev=1-003c, node=/soc/bus@2100000/i2c@21a4000/camera@3c imx-media: Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27media: v4l2-async: Remove V4L2_ASYNC_MATCH_CUSTOMEzequiel Garcia
Custom/driver-specific v4l2-async match support was introduced in 2013, as V4L2_ASYNC_BUS_CUSTOM. This type of match never had any user, so it's fair to conclude it's not required and that safe for removal. If the support is ever needed, it can always be restored. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-26media: v4l2-fwnode: Include v4l2_fwnode_bus_typeDaniel Scally
V4L2 fwnode bus types are enumerated in v4l2-fwnode.c, meaning they aren't available to the rest of the kernel. Move the enum to the corresponding header so that I can use the label to refer to those values. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: v4l: fwnode: v4l2_async_notifier_parse_fwnode_endpoints is deprecatedSakari Ailus
Document that v4l2_async_notifier_parse_fwnode_endpoints() is deprecated. Its functionality has been replaced by other, better functions. Also add a reference to an example if someone ends up wandering here. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: videobuf2: Move frame_vector into media subsystemDaniel Vetter
It's the only user. This also garbage collects the CONFIG_FRAME_VECTOR symbol from all over the tree (well just one place, somehow omap media driver still had this in its Kconfig, despite not using it). Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-7-daniel.vetter@ffwll.ch
2021-01-07media: v4l: common: Fix naming of v4l2_get_link_rateSakari Ailus
Rename v4l2_get_link_rate() as v4l2_get_link_freq(). What the function returns is the frequency of the link; rename it to reflect the name of the control where the information is obtained. Fixes: 1b888b3cebef ("media: v4l: Add a helper for obtaining the link frequency") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04media: v4l2-dev/event: add v4l2_event_wake_all()Hans Verkuil
When unregistering a V4L2 device node, make sure any filehandles that are waiting for an event are woken up. Add v4l2_event_wake_all() to v4l2-event.c and call it from video_unregister_device(). Otherwise userspace might never know that a device node was removed. [hverkuil: checkpatch: replaced 'if (vdev == NULL)' by 'if (!vdev)'] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04media: v4l2-fwnode: Update V4L2_FWNODE_CSI2_MAX_DATA_LANES to 8Sowjanya Komatineni
Some CSI2 receivers support 8 data lanes. So, this patch updates CSI2 maximum data lanes to be 8. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: rc: add keymap for pine64 remoteJonas Karlman
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to KEY_EPG to provide a more useful remote. [0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: vicodec: mark the stateless FWHT API as stableHans Verkuil
The FWHT stateless 'uAPI' was staging and marked explicitly in the V4L2 specification that it will change and is unstable. Note that these control IDs were never exported as a public API, they were only defined in kernel-local headers (fwht-ctrls.h). Now, the FWHT stateless controls is ready to be part of the stable uAPI. While not too late: - Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS. - Move the contents of fwht-ctrls.h to v4l2-controls.h. - Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h to v4l2-controls.h. - Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation. - Add p_fwht_params to struct v4l2_ext_control. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: uapi: move H264 stateless controls out of stagingEzequiel Garcia
The H.264 stateless 'uAPI' was staging and marked explicitly in the V4L2 specification that it will change and is unstable. Note that these control IDs were never exported as a public API, they were only defined in kernel-local headers (h264-ctrls.h). Now, the H264 stateless controls is ready to be part of the stable uAPI. While not too late, let's rename them and re-number their control IDs, moving them to the newly created stateless control class, and updating all the drivers accordingly. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: uapi: Move the H264 stateless control types out of stagingEzequiel Garcia
Move the H264 stateless control types out of staging, and re-number them to avoid any confusion. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: uapi: Move parsed H264 pixel format out of stagingEzequiel Garcia
Since we are ready to stabilize the H264 stateless API, start by first moving the parsed H264 pixel format. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: controls: Validate H264 stateless controlsEzequiel Garcia
Check that all the fields that correspond or are related to a H264 specification syntax element have legal values. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 16:19:36 +0000