summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2012-11-28[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interfaceSylwester Nawrocki
This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series camera interface. The driver exposes a subdev device node for CAMIF pixel resolution and crop control and two video capture nodes - for the "codec" and "preview" data paths. It has been tested on Mini2440 (s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Andrey Gusakov <dron0gus@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28Merge remote-tracking branch 'linus/master' into staging/for_v3.8Mauro Carvalho Chehab
* linus/master: (1428 commits) futex: avoid wake_futex() for a PI futex_q watchdog: using u64 in get_sample_period() writeback: put unused inodes to LRU after writeback completion mm: vmscan: check for fatal signals iff the process was throttled Revert "mm: remove __GFP_NO_KSWAPD" proc: check vma->vm_file before dereferencing UAPI: strip the _UAPI prefix from header guards during header installation include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID Linux 3.7-rc7 powerpc/eeh: Do not invalidate PE properly ALSA: hda - Fix build without CONFIG_PM of/address: sparc: Declare of_iomap as an extern function for sparc again PM / QoS: fix wrong error-checking condition bnx2x: remove redundant warning log vxlan: fix command usage in its doc 8139cp: revert "set ring address before enabling receiver" MPI: Fix compilation on MIPS with GCC 4.4 and newer MIPS: Fix crash that occurs when function tracing is enabled MIPS: Merge overlapping bootmem ranges jbd: Fix lock ordering bug in journal_unmap_buffer() ...
2012-11-25[media] v4l: vb2: add buffer exporting via dmabufTomasz Stanislawski
This patch adds extension to videobuf2-core. It allow to export an mmap buffer as a DMABUF file descriptor. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: add buffer exporting via dmabufTomasz Stanislawski
This patch adds extension to V4L2 api. A new ioctl VIDIOC_EXPBUF is added. The ioctl is used to export an mmap buffer as a DMABUF file descriptor. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2-dma-contig: let mmap method to use dma_mmap_coherent callMarek Szyprowski
Let mmap method to use dma_mmap_coherent call. Moreover, this patch removes vb2_mmap_pfn_range from videobuf2 helpers as it was suggested by Laurent Pinchart. The function is no longer used in vb2 code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2: add prepare/finish callbacks to allocatorsMarek Szyprowski
This patch adds support for prepare/finish callbacks in VB2 allocators. These callback are used for buffer flushing. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-25[media] v4l: vb2: add support for shared buffer (dma_buf)Sumit Semwal
This patch adds support for DMABUF memory type in videobuf2. It calls relevant APIs of dma_buf for v4l reqbuf / qbuf / dqbuf operations. For this version, the support is for videobuf2 as a user of the shared buffer; so the allocation of the buffer is done outside of V4L2. [A sample allocator of dma-buf shared buffer is given at [1]] [1]: Rob Clark's DRM: https://github.com/robclark/kernel-omap4/commits/drmplane-dmabuf [original work in the PoC for buffer sharing] Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] mt9v022: set y_skip_top field to zero as defaultAnatolij Gustschin
Set "y_skip_top" to zero and revise comment as I do not see this line corruption on two different mt9v022 setups. The first read-out line is perfectly fine. Add mt9v022 platform data configuring y_skip_top for platforms that have issues with the first read-out line. Set y_skip_top to 1 for pcm990 board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] adv7604: Replace prim_mode by modeHans Verkuil
Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: migrate driver to videobuf2Lad, Prabhakar
This patch migrates VPBE display driver to videobuf2 framework. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] media: davinci: vpbe: fix build warningLad, Prabhakar
Warnings were generated because of the following commit changed data type for address pointer 195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors add __iomem annotation to fix following warnings drivers/media/platform/davinci/vpbe_osd.c: In function ‘osd_read’: drivers/media/platform/davinci/vpbe_osd.c:49:2: warning: passing argument 1 of ‘__raw_readl’ makes pointer from integer without a cast [enabled by default] arch/arm/include/asm/io.h:104:19: note: expected ‘const volatile void *’ but argument is of type ‘long unsigned int’ This patch stores the ioremap_nocache() returned address in a void __iomem * instead of a unsigned long and passes the same to readl/writel functions which fixes the above warnings. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-21[media] v4l, smiapp, smiapp-pll, adp1653: Update contact informationSakari Ailus
Update contact information to correspond my e-mail address changes. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27[media] rc-core: add separate defines for protocol bitmaps and numbersDavid Härdeman
The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: s5p-hdmi: add HPD GPIO to platform dataTomasz Stanislawski
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] s5p-fimc: Remove unused platform data structure fieldsSylwester Nawrocki
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3ebe5f0ce408490a777a758d5905f0dd58f "[media] s5p-csis: Handle all available power supplies". Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: davinci: vpif: display: separate out subdev from outputLad, Prabhakar
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] davinci: move struct vpif_interface to chan_cfgHans Verkuil
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: move routing info from subdev to inputHans Verkuil
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] vpif_capture: remove unnecessary can_route flagHans Verkuil
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD No need to have a flag for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] media: v4l2-ctrl: add a helper function to add standard control with ↵Lad, Prabhakar
driver specific menu Add helper function v4l2_ctrl_new_std_menu_items(), which adds a standard menu control, with driver specific menu. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add [get/set]_frame_desc subdev callbacksSylwester Nawrocki
Add subdev callbacks for setting up parameters of the frame on media bus that are not exposed to user space directly. This is just an initial, mostly stub implementation. struct v4l2_mbus_frame_desc is intended to be extended with sub-structures specific to a particular hardware media bus. For now these new callbacks are used only to query or specify maximum size of a compressed or hybrid (container) media bus frame in octets. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] V4L: Add s_rx_buffer subdev video operationSylwester Nawrocki
The s_rx_buffer callback allows the host to set buffer for a data being received by the subdev, e.g. non-image frame (meta) data. This callback can be implemented by subdevice like a MIPI CSI2 receiver, allowing the host driver to gather additional data into frame buffer passed to user space. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] dm644x: replace the obsolete preset API by the timings APIHans Verkuil
This patch replaces the preset API by the timings API, and appropriate changes in board file. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] s5p-fimc: Add pipeline ops to separate FIMC-LITE moduleSylwester Nawrocki
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] videobuf2-core: Replace BUG_ON and return an error at vb2_queue_init()Ezequiel Garcia
This replaces BUG_ON() calls with WARN_ON(), and returns EINVAL if some parameter is NULL, as suggested by Jonathan and Mauro. The BUG_ON() call is too drastic to be used in this case. See the full discussion here: http://www.spinics.net/lists/linux-media/msg52462.html Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Add v4l2 subdev driver for S5K4ECGX sensorSangwook Lee
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-dev: add new VFL_DIR_ definesHans Verkuil
These will be used by v4l2-dev.c to improve ioctl checking. I.e. ioctls for capture should return -ENOTTY when called for an output device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_modulator constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_modulator. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audout constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audout. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audio constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audio. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_(un)subscribe_event constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_(un)subscribe_event. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_freq_hw_seek constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_freq_hw_seek. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_jpegcomp constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_jpegcomp. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_fbuf constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_fbuf. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-core: deprecate V4L2_BUF_TYPE_PRIVATEHans Verkuil
This buffer type isn't used at all, and since it is effectively undefined what it should do it is deprecated. The define still exists, but any internal support for such buffers is removed. The decisions to deprecate this was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-18[media] media v4l2-mem2mem: fix src/out and dst/cap num_rdySascha Hauer
src bufs belong to out queue, dst bufs belong to in queue. Currently this is not a real problem since all users currently need exactly one input and one output buffer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] mt9v032: Provide link frequency controlLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-ctrls: Add v4l2_ctrl_[gs]_ctrl_int64()Laurent Pinchart
These helper functions get and set a 64-bit control's value from within a driver. They are similar to v4l2_ctrl_[gs]_ctrl() but operate on 64-bit integer controls instead of 32-bit controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] ad9389b: driver for the Analog Devices AD9389B video encoderHans Verkuil
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] adv7604: driver for the Analog Devices ADV7604 video decoderHans Verkuil
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1545 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - Only port A of the four HDMI input ports is implemented (our hardware only uses that port) - No HDCP repeater support (we don't use that either) And since there are some 600-odd pages of datasheet for this single device, I'm sure that there are many more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-common: add CVT and GTF detection functionsHans Verkuil
These two helper functions detect whether the analog video timings detected by the video receiver match the VESA CVT or GTF standards. They basically do the inverse of the CVT and GTF modeline calculations. This patch also adds a helper function that will determine the aspect ratio based on the provided EDID values. This aspect ratio can be given to the GTF helper function. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-common: add v4l_match_dv_timingsHans Verkuil
Add the v4l_match_dv_timings function that can be used to compare two v4l2_dv_timings structs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13[media] v4l2-subdev: add support for the new edid ioctlsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] V4L: soc-camera: add selection API host operationsGuennadi Liakhovetski
Add .get_selection() and .set_selection() soc-camera host driver operations. Additionally check, that the user is not trying to change the output sizes during a running capture. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] soc-camera: Add and use soc_camera_power_[on|off]() helper functionsLaurent Pinchart
Instead of forcing all soc-camera drivers to go through the mid-layer to handle power management, create soc_camera_power_[on|off]() functions that can be called from the subdev .s_power() operation to manage regulators and platform-specific power handling. This allows non soc-camera hosts to use soc-camera-aware clients. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [g.liakhovetski@gmx.de: fix compile breakage] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] media: rc: Introduce RX51 IR transmitter driverTimo Kokkonen
This is the driver for the IR transmitter diode found on the Nokia N900 (also known as RX51) device. The driver is mostly the same as found in the original 2.6.28 based kernel that comes with the device. The following modifications have been made compared to the original driver version: - Adopt to the changes that has happen in the kernel during the past five years, such as the change in the include paths - The OMAP DM-timers require much more care nowadays. The timers need to be enabled and disabled or otherwise many actions fail. Timers must not be freed without first stopping them or otherwise the timer cannot be requested again. The code has been tested with sending IR codes with N900 device running Debian userland. The device receiving the codes was Anysee DVB-C USB receiver. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13[media] dvb: get rid of fe_ioctl_override callbackMauro Carvalho Chehab
This callback were meant to allow overriding a FE callback, before its call, but it is not really needed, as the callback can be intercepted after tuner attachment. Worse than that, only DVBv3 calls are intercepted this way, so a DVBv5 application will produce different effects than a DVBv3 one. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi>
2012-08-11[media] v4l2: typosMichael Jones
[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt] Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>