summaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2013-03-31[media] s5p-csis: Add device tree supportSylwester Nawrocki
This patch support for binding the driver to the MIPI-CSIS devices instantiated from device tree and parsing the SoC and board specific properties. The MIPI CSI-2 channel is determined by the value of reg property placed in csis' port subnode. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-31[media] Add a V4L2 OF parserGuennadi Liakhovetski
Add a V4L2 OF parser, implementing bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. [s.nawrocki@samsung.com: various corrections and improvements since the initial version] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-29[media] v4l2: Add a V4L2 driver for SI476X MFDAndrey Smirnov
This commit adds a driver that exposes all the radio related functionality of the Si476x series of chips via the V4L2 subsystem. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-29[media] ioctl numbers are unsigned intMauro Carvalho Chehab
ioctl's number is unsigned int. Fix it at vidioc_default. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-25[media] v4l2: add new VIDIOC_DBG_G_CHIP_NAME ioctlHans Verkuil
Simplify the debugging ioctls by creating the VIDIOC_DBG_G_CHIP_NAME ioctl. This will eventually replace VIDIOC_DBG_G_CHIP_IDENT. Chip matching is done by the name or index of subdevices or an index to a bridge chip. Most of this can all be done automatically, so most drivers just need to provide get/set register ops. In particular, it is now possible to get/set subdev registers without requiring assistance of the bridge driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2 core: remove the obsolete dv_preset supportHans Verkuil
These ioctls are no longer used by any drivers, so remove them. [mchehab@redhat.com: Fix merge conflict] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-subdev: remove obsolete dv_preset opsHans Verkuil
These ops are no longer used, so it's time to remove them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-common: remove obsolete v4l_fill_dv_preset_infoHans Verkuil
It's no longer used, so it can now be removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] uda1342: add new uda1342 audio codec driverHans Verkuil
This based on the wis-uda1342.c driver that's part of the go7007 driver. It has been converted to a v4l subdev driver by Pete Eberlein, and I made additional cleanups. Based on work by: Pete Eberlein <pete@sensoray.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] tuner: add Sony BTF tunersHans Verkuil
This adds support for three Sony BTF tuners: TUNER_SONY_BTF_PG472Z: PAL+SECAM TUNER_SONY_BTF_PK467Z: NTSC-M-JP TUNER_SONY_BTF_PB463Z: NTSC-M These come from the go7007 staging driver where they were implemented in the wis-sony-tuner i2c driver. Adding support for these tuners to tuner-types.c is the first step towards removing the wis-sony-tuner driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] saa7115: add support for double-rate ASCLKHans Verkuil
Some devices expect a double rate ASCLK. Add a flag to let the driver know through the s_crystal_freq call. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] saa7115: add config flag to change the IDQ polarityHans Verkuil
Needed by the go7007 driver: it assumes a different polarity of the IDQ signal, so we need to be able to tell the saa7115 about this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-core: add code to check for specific opsHans Verkuil
This patch adds a v4l2_subdev_has_op() macro and a v4l2_device_has_op macro to quickly check if a specific subdev or any subdev supports a particular subdev operation. This makes it easy for drivers to disable certain ioctls if none of the subdevs supports the necessary functionality. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2-ctrls: eliminate lockdep false alarms for struct ↵Andy Walls
v4l2_ctrl_handler.lock When calling v4l2_ctrl_add_handler(), lockdep would detect a potential recursive locking problem on a situation that is by design intended and not a recursive lock. This happened because all struct v4l2_ctrl_handler.lock mutexes were created as members of the same lock class in v4l2_ctrl_handler_init(), and v4l2_ctrl_add_handler() takes the hdl->lock on two different v4l2_ctrl_handler instances. This change breaks the large lockdep lock class for struct v4l2_ctrl_handler.lock and breaks it into v4l2_ctrl_handler instantiation specific lock classes with meaningful class names. This will validly eliminate lockdep alarms for v4l2_ctrl_handler locking validation, as long as the relationships between drivers adding v4l2 controls to their own handler from other v4l2 drivers' control handlers remains straightforward. struct v4l2_ctrl_handler.lock lock classes are created with names such that the output of cat /proc/lockdep indicates where in the v4l2 driver code v4l2_ctrl_handle_init() is being called on instantiations: ffffffffa045f490 FD: 10 BD: 8 +.+...: cx2341x:1534:(hdl)->lock ffffffffa0497d20 FD: 12 BD: 2 +.+.+.: saa7115:1581:(hdl)->lock ffffffffa04ac660 FD: 14 BD: 2 +.+.+.: msp3400_driver:756:(hdl)->lock ffffffffa0484b90 FD: 12 BD: 1 +.+.+.: ivtv_gpio:366:(&itv->hdl_gpio)->lock ffffffffa04eb530 FD: 11 BD: 2 +.+.+.: cx25840_core:1982:(&state->hdl)->lock ffffffffa04fbc80 FD: 11 BD: 3 +.+.+.: wm8775:246:(&state->hdl)->lock Some lock chains, that were previously causing the recursion alarms, are now visible in the output of cat /proc/lockdep_chains: irq_context: 0 [ffffffffa0497d20] saa7115:1581:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04ac660] msp3400_driver:756:(hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa0484b90] ivtv_gpio:366:(&itv->hdl_gpio)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04eb530] cx25840_core:1982:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock irq_context: 0 [ffffffffa04fbc80] wm8775:246:(&state->hdl)->lock [ffffffffa045f490] cx2341x:1534:(hdl)->lock Signed-off-by: Andy Walls <awalls@md.metrocast.net> [hans.verkuil@cisco.com: keep mutex_init in v4l2_ctrl_handler_init_class] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_register ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: pass std by value to the write-only s_std ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument by value instead of by reference. I could have chosen to add const instead, but this is 1) easier to handle in drivers and 2) consistent with the s_std subdev operation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_tuner ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_frequency ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-23[media] rc-core: don't treat dev->rc_map.rc_type as a bitmapDavid Härdeman
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for two reasons. First of all, it is pretty bogus to change the protocol type of the keymap just because the hardware has been asked to decode a different protocol. Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed out by James Hogan <james.hogan@imgtec.com>. Fix both issues by introducing a separate enabled_protocols member to struct rc_dev. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] media: ths7353: add support for ths7353 video amplifierLad, Prabhakar
The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-21[media] videobuf2: add gfp_flagsHans Verkuil
Some drivers have special memory requirements for their buffers, usually related to DMA (e.g. GFP_DMA or __GFP_DMA32). Make it possible to specify additional GFP flags for those buffers by adding a gfp_flags field to vb2_queue. Note that this field will be replaced in the future with a different mechanism, but that is still work in progress and we need this feature now so we won't be able to convert drivers with such requirements to vb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci: more gama -> gamma typo fixesHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci/dm644x_ccdc: fix compiler warningHans Verkuil
drivers/media/platform/davinci/dm644x_ccdc.c: In function ‘validate_ccdc_param’: drivers/media/platform/davinci/dm644x_ccdc.c:233:32: warning: comparison between ‘enum ccdc_gama_width’ and ‘enum ccdc_data_size’ [-Wenum-compare] It took a bit of work, see this thread of an earlier attempt to fix this: https://patchwork.kernel.org/patch/1923091/ I've chosen not to follow the suggestions in that thread since gamma_width is really a different property from data_size. What you really want is to know if gamma_width fits inside data_size and for that you need to translate each enum into a maximum bit number so you can safely compare the two. So I put in two static inline translation functions instead, keeping the rest of the code the same (except for fixing the 'gama' typo). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19[media] davinci: remove VPBE_ENC_DV_PRESET and rename VPBE_ENC_CUSTOM_TIMINGSHans Verkuil
Remove VPBE_ENC_DV_PRESET (the DV_PRESET API is no longer supported) and VPBE_ENC_CUSTOM_TIMINGS is renamed to VPBE_ENC_DV_TIMINGS since the old "CUSTOM_TIMINGS" name is deprecated in favor of "DV_TIMINGS". Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-18[media] media: Add 64--32 bit compat ioctl handlerSakari Ailus
Provide an ioctl handler for 32-bit binaries on 64-bit systems. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] vb2: Add support for non monotonic timestampsKamil Debski
Not all drivers use monotonic timestamps. This patch adds a way to set the timestamp type per every queue. In addition, set proper timestamp type in drivers that I am sure that use either MONOTONIC or COPY timestamps. Other drivers will correctly report UNKNOWN timestamp type instead of assuming that all drivers use monotonic timestamps. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] bttv: add VIDIOC_DBG_G_CHIP_IDENTHans Verkuil
VIDIOC_DBG_G_CHIP_IDENT is a prerequisite for the G/S_REGISTER ioctls. In addition, add support to call G/S_REGISTER for supporting i2c devices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] media: ov7670: Add possibility to disable pixclk during hblankJavier Martin
Some bridge drivers capture pixels during blanking periods if pixclk is enabled. In order to avoid capturing bogus data we need to disable pixclk in the sensor during those blanking periods. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] media: ov7670: add possibility to bypass pll for ov7675Javier Martin
For a frame rate of 30 fps a pixclk of 24MHz is needed. For those cases where the ov7670 has a clean 24MHz input (xvclk) the PLL can be bypassed. This will result in a value of clkrc of 1, which means that in practice pixclk = xvclk (input clock) Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] blackfin: add error frame supportScott Jiang
Mark current frame as error frame when ppi error interrupt report fifo error. Member next_frm in struct bcap_device can be optimized out. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] media: tvp514x: remove field descriptionPrabhakar Lad
This patch removes the field description of fields that no longer exists, along side aligns the field description of fields. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] media: adv7343: accept configuration through platform dataLad, Prabhakar
The current code was implemented with some default configurations, this default configuration works on board and doesn't work on other. This patch accepts the configuration through platform data and configures the encoder depending on the data passed. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] s5p-fimc: Redefine platform data structure for fimc-isSylwester Nawrocki
Newer Exynos4 SoC are equipped with a local camera ISP that controls external raw image sensor directly. Such sensors can be connected through FIMC-LITEn (and MIPI-CSISn) IPs to the ISP, which then feeds image data to the FIMCn IP. Thus there can be two busses associated with an image source (sensor). Rename struct s5p_fimc_isp_info describing external image sensor (video decoder) to struct fimc_source_info to avoid confusion. bus_type is split into fimc_bus_type and sensor_bus_type. The bus type enumeration is extended to include both FIMC Writeback input types. The bus_type enumeration and the data structure name in the board files are modified according to the above changes. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add S5C73M3 camera driverAndrzej Hajda
Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add driver for OV9650/52 image sensorsSylwester Nawrocki
This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_log_status() helper functionSylwester Nawrocki
This patch adds a v4l2 core helper function that can be used as the log_status handler for subdevs that only need to log state of the v4l2 controls owned by the subdev's control handler. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_ctrl_subdev_subscribe_event() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .subscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add v4l2_event_subdev_unsubscribe() helper functionSylwester Nawrocki
Add a v4l2 core helper function that can be used as the subdev .unsubscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] v4l2-ctrl: Add helper function for the controls range updateSylwester Nawrocki
This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] V4L: Add header file defining standard image sizesSylwester Nawrocki
Add common header file defining standard image sizes, so we can avoid redefining those in each driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: split struct soc_camera_link into host and subdevice partsGuennadi Liakhovetski
struct soc_camera_link currently contains fields, used both by sensor and bridge drivers. To make subdevice driver re-use simpler, split it into a host and a subdevice parts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: remove struct soc_camera_device::video_lockGuennadi Liakhovetski
Currently soc-camera has a per-device node lock, used for video operations and a per-host lock for code paths, modifying host's pipeline. Manipulating the two locks increases complexity and doesn't bring any advantages. This patch removes the per-device lock and uses the per-host lock for all operations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] soc-camera: properly fix camera probing racesGuennadi Liakhovetski
The recently introduced host_lock causes lockdep warnings, besides, list enumeration in scan_add_host() must be protected by holdint the list_lock. OTOH, holding .video_lock in soc_camera_open() isn't enough to protect the host during its building of the pipeline, because .video_lock is per soc-camera device. If, e.g. more than one sensor can be attached to a host and the user tries to open both device nodes simultaneously, host's .add() method can be called simultaneously for both sensors. Fix these problems by holding list_lock instead of .host_lock in scan_add_host() and taking it shortly at the beginning of soc_camera_open(), and using .host_lock to protect host's .add() and .remove() operations only. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-05[media] v4l2-ctrls: add a notify callbackHans Verkuil
Sometimes platform/bridge drivers need to be notified when a control from a sub-device changes value. In order to support this a notify callback was added. [dheitmueller@kernellabs.com: fix merge conflict in v4l2-ctrls.c] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-26[media] v4l2: blackfin: add EPPI3 supportScott Jiang
Bf60x soc has a new PPI called Enhanced PPI version 3. HD video is supported now. To achieve this, we redesign ppi params and add dv timings feature. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-23[media] rc/keymaps: add RC keytable for MyGica X8507Alfredo Jesús Delaiti
Add RC-5 remote keytable definition for MyGica X8507. [mchehab@redhat.com: fixed whitespacing - it seems that Alfredo's emailer mangled it] Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] davinci: vpbe: pass different platform names to handle different ip'sLad, Prabhakar
The vpbe driver can handle different platforms DM644X, DM36X and DM355. To differentiate between this platforms venc_type/vpbe_type was passed as part of platform data which was incorrect. The correct way to differentiate to handle this case is by passing different platform names. This patch creates platform_device_id[] array supporting different platforms and assigns id_table to the platform driver, and finally in the probe gets the actual device by using platform_get_device_id() and gets the appropriate driver data for that platform. Taking this approach will also make the DT transition easier. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] davinci/vpss: add helper functions for setting hw paramsManjunath Hadli
Add vpss helper functions to be used in the main driver for setting hardware parameters. Add interface functions to set sync polarity, interrupt completion and pageframe size in vpss to be used by the main driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-21[media] v4l: Helper function for obtaining timestampsSakari Ailus
v4l2_get_timestamp() produces a monotonic timestamp but unlike ktime_get_ts(), it uses struct timeval instead of struct timespec, saving the drivers the conversion job when getting timestamps for v4l2_buffer's timestamp field. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-19[media] media: mem2mem: make reference to struct m2m_ops in the core constGuennadi Liakhovetski
The mem2mem core doesn't change struct m2m_ops, provided by the driver, make references to it const. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>